Preview only show first 10 pages with watermark. For full document please download

Led Lighting Power Supply

   EMBED


Share

Transcript

EKLIPSE PSB - V2015 / 2 - EN - INSTALLATION PSB LED LIGHTING POWER SUPPLY PSB LED LIGHTING POWER SUPPLY INCLUDED IN THE BOX PSB Quantity: 1 EKLIPSE PSB - V2015 / 2 - EN - INSTALLATION 1 INSTALLATION WARNING KNOW YOUR PRODUCT POWER CORD STEP 1 STEP 2 STEP 3 Before installing your lighting system, make sure that the Main Power Line is off. Remove the cover plate by unscrewing the 2 screws using a Phillips screwdriver. Verify that you have you have the appropriate Power Supply for your product. Twist and rock the desired knock out using a Flat Head screwdriver. If your Power Supply comes equipped with a Power Cord, skip to Step 8. Install a Romex® clamp connector (not included) into the knock out opening. PSB LED LIGHTING POWER SUPPLY INSTALLATION STEP 4 The minimum distance between Power Supplies should be of 1 inch (25.4 mm). STEP 5 Use a Romex® Non-Metallic Snap-in Connector (not included) to link Power Supplies. STEP 6 While the Main Power Line is off, wire the Power Supply to the Main Power Line. EKLIPSE PSB - V2015 / 2 - EN - INSTALLATION 2 POWER SUPPLY STEP 8 Fix the Power Supply to the installation surface using two screws (not included). STEP 9 Wire the LED fixtures to the Power Supply in PARALLEL while respecting the max. load. STEP 10 Only when your entire fixtures are wired properly should you turn on the Main Power Line. STEP 7 Screw back into place the cover plate and tighten the clamp connector. PSB LED LIGHTING POWER SUPPLY CONNECTION CABLE MAXIMUM LENGTH Maximum distance between the PSB and fixtures : MAX 60’ (18.2 m) - 14 gage cable MAX 100’ (30.4 m) - 12 gage cable RE D BL AC K To 120V - 240V RE D EKLIPSE PSB - V2015 / 2 - EN - INSTALLATION 3 BL AC K WAGO 5 entries 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e. [email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.