Transcript
VPL
LED Parking Garage Vaportight Product Information Project Name
Type
Catalog Number
Date
SPECIFICATIONS Features
• Replaces maintenance & energy intensive HID & HPS fixtures. • Wide distribution works well in low mounting height applications. • Hose down & wet location fixture is IP65, IP66 for all sizes, IP67 for 4' & 8' (sensored units are IP65). • Poured in place gasket seals the enclosure from most hostile environments. • Frosted deep diffuser ensures visual comfort for drivers. • Very tough diffuser resists breakage and reduces replacement and maintenance costs. • LED light engine eliminates risk of glass breakage in parking garages. • Instant re-start with no warm-up times or reduced light output in cold environments. • Economical mounting options can provide dramatic savings on the installation labor. • Stainless steel mounting hardware options for cable & ceiling mount systems. • Multiple lumen and driver output options. • Long-life LEDs at L80 (80% lumen maintenance) at 60,000 hours reduce life cycle maintenance costs. • Available in 2', 4’ and 8’ lengths. • Up to 116 lumens per watt. • Color Rendering Index (CRI) > 80. • Made In USA. Meets ARRA & Buy American requirements.
Certifications
Construction
• • • • • •
• Fiberglass housing & injection molded impact resistant frosted acrylic lens • Housing and lens are made with flame retardant 5VA (f1) fire rated materials • Certain airborne contaminants can diminish integrity of acrylic. Consult factory for chemical compatibility. • Zinc tamper resistant screws, order separately, (6), (8) or (14) required. • Stainless steel latches optional • Secure locking plastic latches standard • Stainless steel mounting brackets standard • Weight: 1x2 - 6 lbs. & 1x4 - 9 lbs. & 1x8 - 18 lbs.
• Please refer to the Lighting Facts website for specific product qualifications at www.lightingfacts.com.
Application
Electrical • • • • • • • • • • •
CSA listed for U.S. & Canada. Tested to UL 1598 & UL 8750 standards. Luminaires bear appropriate listing labels. Emergency-equipped fixtures labeled UL 924. Adheres to LM79, LM80 and TM21 industry standards. DesignLights Consortium® (DLC) qualified. Please refer to the DLC website for specific product qualifications at www.designlights.org.
• Suitable for use with most wired or wireless lighting control systems • Suitable for wet locations: • Parking garages • Car washes • Livestock buildings • Low-bay • Under awnings • UL Sanitation
Input Voltage Range: 100/277 VAC Nom. (90-305 V Min/Max) Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Active Power Factor Correction Power Factor: >0.90 @ full load, 100V through 277V Inrush Current: 60 Amps max @ 230 VAC, cold start 25ºC Harmonic Distortion: THD < 20% @ full load Protection: Over-Voltage, Over-Temperature (110º) & Short Circuit with self-recovery Compliant to FCC Part 15 requirements for EMI/RFI emissions NEC/CEC compliant ballast disconnect is standard Optional surge protection: ANSI Std. C62.41.2 Category A (10 kV) Optional emergency battery pack
Warranty
• Five-year warranty. (Terms and Conditions Apply)
CERTIFICATION
ORDERING INFORMATION – MODEL VPL LED Parking Garage Vaportight
– SIZE 1x2 1x2
Nominal
1x4 1x4
Nominal
1x8 1x8
Nominal
EXAMPLE VPL-1X4-LW-F-UL-40K –
LUMEN OUTPUT XL Extra Low
Wattage (1x2, 1x4, 1x8)
LW Low Wattage
(1x2, 1x4, 1x8)
HL High Lumen Wattage (1x4, 1x8)
FOOTNOTES 1. Must be used in conjunction with lighting controls. 2. Contact factory for additional cord & mounting options. 3. Not available with 1x2.
– DRIVER OUTPUT F Fixed DM 0-10v
Dimming1
– DRIVER VOLTAGE UL Universal 120/277 VAC
COLOR TEMP 30K 35K 40K 50K
3000 3500
–
–
OCC SENSOR WH Wet Location
High-Bay Sensor
WL Wet Location
Low-Bay Sensor
– CORD PLUG2 C8 8' Cord, No Plug
C8/L715 8' Cord
& Plug (L7-15P)
C8/515 8' Cord & Plug (515P)
Steel Latches
LSP Lighting
Surge Protector (270 Joules)
EB Emergency Battery Backup3
JP Job Pack
4000 5000
OTHER SSL Stainless
ACCESSORIES (ORDER SEPARATELY) Zinc Tamper Resistant Screws
Plastic Latches Order Part: #95000644 (6, 8 or 14 Required) Stainless Steel Latches Order Part: #95011561 (6, 8 or 14 Required)
Page 1/3 - Revised: 01/02/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves the right to change specifications without notice. Tel [West Coast] 714.386.5550 [Midwest] 715.381.2971 [East Coast] 714.386.5642 / Website www.P-2.com
VPL
LED Parking Garage Vaportight PHOTOMETRIC DATA
Test: 14.00028 Test Date: 07/31/14
PHOTOMETRIC DATA: VPL-1X4-LW-F-UL-40K All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP certified lab. LUMINAIRE DATA Luminaire Ballast Ballast Factor Lamp Fixture Lumens Watts Mounting Shielding Angle Spacing Criterion Luminous Opening in feet
INDOOR CANDELA PLOT
ZONAL LUMEN SUMMARY 90
VPL-1X4-LW-F-UL-40K LED Parking Garage Vaportight D15CC55UNVTC 1.00 LED 5419 50 Suspended & Ceiling N.A. 0° = 1.93 90° = 1.30 Length: 4.17 Width: 0.50 Height: 0.29
80
285 70
Zone
Lumens
%Lamp
%Fixt
0-20 0-30 0-40 0-60 0-80 0-90
317 710 1247 2627 4124 4747
N.A. N.A. N.A. N.A. N.A. N.A.
6 13 23 49 76 88
569 60
854 50
1138 0
10
20
30
40
0.0 _____ 40.0 _ _ _ _ 90.0 _ _ _ _
OPERATING ENVIRONMENT
Proposed System
Min Temp
Max Temp
VPL-1X2-XL
-20°C/-4°F
40°C/104°F
VPL-1X2-LW
-20°C/-4°F
25°C/77°F
VPL-1X4-XL
-20°C/-4°F
50°C/122°F
VPL-1X4-LW
-20°C/-4°F
45°C/113°F
VPL-1X4-HL
-20°C/-4°F
25°C/77°F
VPL-1X8-XL
-20°C/-4°F
50°C/122°F
VPL-1X8-LW
-20°C/-4°F
45°C/113°F
VPL-1X8-HL
-20°C/-4°F
25°C/77°F
Application Notes 1. Application temperatures are provided to ensure the longevity and performance of the driver and LEDs. 2. Results are based off the In-Situ Temperature Measurement Test (ISTMT) along with the drivers' temperature and life curves. 3. Optional emergency battery equipped units have a minimum temperature of 10°C. 4. Precision-Paragon [P2]'s 5 year warranty assumes operation at the maximum ambient temperature range.
LUMEN PACKAGE OPTIONS Proposed System
Lumen Output
CRI
Nominal Lumen Range
Nominal Watts
Lumens Per Wattage Range
VPL-1X2-XL VPL-1X2-LW VPL-1X4-XL VPL-1X4-LW VPL-1X4-HL VPL-1X8-XL VPL-1X8-LW VPL-1X8-HL
XL LW XL LW HL XL LW HL
>80 >80 >80 >80 >80 >80 >80 >80
2960-3225 4450-4900 2900-3100 5300-5850 8950-9850 5800-6200 10600-11700 17900-19700
33 51 27 52 102 54 104 204
90-98 87-96 108-116 102-113 88-97 108-116 102-113 88-97
Lumen values shown are initial delivered lumens tested at 25°C per IES LM-79 standards. Lumens vary according to color temperatures and other factors. See specific photometric test(s).
Page 2/3 - Revised: 01/02/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves the right to change specifications without notice. Tel [West Coast] 714.386.5550 [Midwest] 715.381.2971 [East Coast] 714.386.5642 / Website www.P-2.com
VPL
LED Parking Garage Vaportight FIXTURE DIMENSIONS 1X2 SIDE VIEW
CROSS SECTION ALL
.85"
27.70"
3.82" FLAT
5.63" 6.77" 7.41"
1X4 SIDE VIEW
51.81" 5.63"
1X8 SIDE VIEW
99.52" 5.63" *Drawings N.T.S.
MOUNTING OPTIONS SUSPENDED VMB-VAPORTIGHT MOUNTING BRACKETS Included
GRIPPLE LOOP Order Separately
SURFACE VMB-VAPORTIGHT MOUNTING BRACKETS Included
*Contact the Service Hub for additional mounting options including stainless steel availability.
TAMPER RESISTANT LATCHES PLASTIC LATCHES: TAMPER RESISTANT SCREWS (ORDER SEPARATELY)
STAINLESS STEEL LATCHES: TAMPER RESISTANT SCREWS (ORDER SEPARATELY)
PART #95000644
PART #95011561
SCREW - #6 LENGTH - 1/2"
SCREW - #6 LENGTH - 3/4"
NOTES: *Torx screwdriver required for tamper resistant screws. *Screws Required: 1x2 = 6 or 1x4 = 8 or 1x8 = 14 *Images N.T.S.
Page 3/3 - Revised: 01/02/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves the right to change specifications without notice. Tel [West Coast] 714.386.5550 [Midwest] 715.381.2971 [East Coast] 714.386.5642 / Website www.P-2.com
