Transcript
Legrand cabling system LCS2 area distribution boxes and cords
0 335 49
0 335 40
RJ 45
RJ 45
Connection principle
Pack
1
Cat.Nos
0 335 49
1 1 1
0 335 44 0 335 45 0 335 46
1
0 335 40
0 335 40 fitted with SC fibre optic unit, accessory Cat.No 0 335 20 and a 6 x RJ 45 connector unit
0 517 86
Area distribution boxes For distribution of low current in a zone fitted with 1 to 12 RJ 45 sockets Centralise connections to guarantee flexibility and adaptability of the installation Installed on false ceiling or false floor Connect to the patch panel or the floor cabinet Connection to an RJ 45 socket with stripped cord or to a Mosaic RJ 45 socket with copper feedthrough with an RJ 45/RJ 45 cord IP 21 - IK 07 Conform to standards UTE C 15-900, NF C 15-100, NF C 20-730, EN 50-174.2, CEI 60950, ISO/IEC 11801 Ed. 2.0, EN 50173-2 and TIA/EIA 568 Colour code TIA/EIA 568 A and C Cords and cables: ISO 11801 Ed.2.0, EN 50173-1, TIA/EIA 568 Technical characteristics: - polycarbonate PC hood - polypropylene PP base - RAL 7035 - hold connector units in place in the box: 100 N - Cables anchored on support using Colring cable ties Area distribution boxes cat. 6a STP Fitted with 2 x 6 LCS² RJ 45 cat. 6a connector blocks and RJ 45 blanking plates Supplied with Colring cable ties Area distribution boxes cat. 6 Fitted with 2 x 6 LCS2 connector blocks RJ 45 cat. 6 and RJ 45 blanking plates Supplied with Colring cable ties UTP FTP STP Self-assembly area distribution box for cat. 6a, 6 and 5e Used for mounting LCS2 RJ 45 connector blocks cat. 6a (p. 696), RJ 45 connector blocks cat. 6 (p. 700) or RJ 45 connector blocks cat. 5e (p. 707)
Cords cat. 6a - RJ 45/stripped
1 1 1
704
RJ 45 - straight stripped Clip on and off in the area distribution boxes and connection via LCS2 connector of an RJ 45 socket by the stripped side Cords prepared in factory, "ready for wiring" Conform to standards ISO/IEC 11801 Ed. 2.0, EN 50173-1 and TIA/EIA 568 C2 Yellow RAL 1018 S/FTP unscreened impedance 100 Ω 0 517 86 Length 8 m 0 517 87 Length 15 m 0 517 88 Length 20 m
0 517 57
Pack
Cat.Nos
0 515 23
Cords cat. 6 - RJ 45/stripped AWG 24 RJ 45 - straight stripped Clip on and off in the area distribution boxes and connection via LCS2 connector of an RJ 45 socket by the stripped side Cords prepared in factory, "ready for wiring" Conform to standards ISO/IEC 11801 Ed. 2.0, EN 50173-1 and TIA/EIA 568 Blue RAL 5015 Wiring in T 568 B
4 4 4
U/UTP unscreened impedance 100 Ω 0 517 57 Length 8 m 0 517 58 Length 15 m 0 517 59 Length 20 m
4 1 4
F/UTP screened impedance 100 Ω 0 517 96 Length 8 m 0 517 97 Length 15 m 0 517 98 Length 20 m
Cords cat. 6a - RJ 45/RJ 45
4 4 4
For direct connection via RJ 45 male plug to the area distribution box and to the RJ 45 socket with copper feedthrough to ensure: - safe connection - speed and reliability of connection Yellow RAL 1018 S/FTP unscreened impedance 100 Ω 0 515 23 Length 8 m 0 515 24 Length 15 m 0 515 25 Length 20 m
Cords cat. 6 - RJ 45/RJ 45
4 4 4
For direct connection via RJ 45 male plug to the zone distribution box and to the RJ 45 socket with copper feedthrough to ensure: - safe connection - speed and reliability of connection Blue RAL 5015 U/UTP unscreened impedance 100 Ω 0 515 10 Length 8 m 0 515 11 Length 15 m 0 515 12 Length 20 m
4 4 4
F/UTP screened impedance 100 Ω 0 515 13 Length 8 m 0 515 14 Length 15 m 0 515 15 Length 20 m
