Transcript
Leica CS25/CS25 GNSS/CS25 LRBT Quick Guide
Version 1.0 English
2
CS25, Introduction
Introduction Purchase
Congratulations on the purchase of a Leica CS25. Read and follow the User Manual on the accompanying DVD before using the product. • This Quick Start Guide contains first use directions as well as initial, basic instructions for setting up the product and operating it. • Keep all documentation for future reference!
Available documentation
Refer to the following resources for all CS25 documentation/software: • the Leica USB documentation card • Windows 7 Recovery DVD (including User Guide) • https://myworld.leica-geosystems.com
Intended use
• •
Remote control of product. Data communication with external appliances.
Symbols
The symbols used in this manual have the following meanings: Type
NOTICE
CS25, Introduction
Description DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING Indicates a potentially hazardous situation or an unintended use which, if not avoided, could result in death or serious injury. CAUTION
Indicates a potentially hazardous situation or an unintended use which, if not avoided, may result in minor or moderate injury. Indicates a potentially hazardous situation or an unintended use which, if not avoided, may result in appreciable material, financial and environmental damage. Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner.
3
4
CS25, Introduction Care and transport
• •
Protect the product against shock and vibration. Periodically carry out functional tests particularly after the product has been dropped, stored for long periods or transported.
The product must not be disposed with household waste.
The battery must be charged before using it for the first time. The following advice is only valid for batteries, power adapter or docking station. WARNING
The product is not designed for use under wet and severe conditions. If unit becomes wet it may cause you to receive an electric shock. Precautions: Use the product only in dry environments, for example in buildings or vehicles. Protect the product against humidity. If the product becomes humid, it must not be used!
Memory device
USB stick: Internal memory:
CS25, Introduction
The tablet computer has a USB port fitted as standard. The tablet computer has an internal memory fitted as standard. Available capacity: 64 GB.
The delivered Leica Geosystems USB flash drive contains system software and is not certified for permanent data transfer i.e. as data storage for measurement data. Use only certified industrial grade USB flash drives such as the Leica MS1 (order number 765199).
5
6
CS25, Instrument Components
1
Instrument Components
CS25 GNSS handheld packages
CS25 GNSS handheld package with Zeno Field (6007654) / CS25 GNSS handheld package with Zeno Connect (6007652). CS25HA 799713
GAD115 798240
Zeno Field 788867 Zeno Connect 788866
CS25 GNSS 796161 GVP703 790314 ALG7-08B 785413
005630_001
Frontside of the tablet computer
c d e a
f b
g
CC_002
Backside of the tablet computer
a) b) c) d) e) f)
DSUB9 port USB host port for USB stick Screen Keyboard Micro in, Audio out and LAN Power socket and USB host port for USB stick g) Speaker
a b c
CC_003
CS25, Instrument Components
d e f
a) b) c) d) e) f)
Digital camera Battery compartment R SIM card slot Stylus Docking station contacts Battery compartment L
7
8
CS25, Instrument Components Fixing the Helix antenna to the GAD115 arm
a 2 1 b
3 4
005629_001
a) Helix antenna b) GAD115 arm
Attach Helix antenna step-by-step
Valid for CS25 GNSS only.
1 2
004738_001
Step
Description Ensure that the Helix antenna connector and the linkage on the backside of the CS25 is free of dust and grease.
1.
Turn over the CS25 tablet computer to the underside.
2.
Hold the Helix antenna at the end of the antenna connector.
3.
Insert the antenna connector into the female connector on the CS25 until it clicks into place.
CS25, Instrument Components
9
10
CS25, Instrument Components Keyboard display of the tablet computer a b c
d e
CC_004
a) b) c) d) e)
LED indicators ON/OFF Menu Arrow keys, OK Function keys
Keys
Key
Function
ON/OFF
If tablet computer is already off: Turns on the tablet computer when held for 5 s. If tablet computer is already on: • Puts tablet computer into stand-by mode when held < 4 s. • Turns off the tablet computer when held for 8 s.
Menu
Start Menu button options.
Arrow keys
Move the focus on the screen.
OK
Selects the highlighted line and leads to the next logical menu / dialog.
Function keys F1-F3
Programmable hotkeys. See user manual for more details.
CS25, Instrument Components
11
12
CS25, Operation
2 Start up step-by-step
Operation 1.
2.
Write down the Microsoft Windows license Product Key: XXXXX-XXXXXXXXXX-XXXXX-XXXXX. Located under the (L) left battery (bottom sight). You will need it when using the unit for the first time.
You will be forced to activate your Windows License Product Key during the installation process. This requires Internet connection. Insert an Ethernet cable or choose to activate your license by using the toll-free automatic phone activation (If you are unable to do either, choose to activate later and refer to the CS25 User Manual.)
3.
Install and lock the batteries. Attach the charger to start charging.
Wait until the device is fully charged before using it for the first time. The initial charging takes approximately 4 hours. 2 3
1
CC_010
CC_006
4.
When starting the unit for the first time, press
a
and hold for 5 seconds (until the left LED turns green).
CC_009
CS25, Operation
b
d
c
e
13
14
CS25, Operation 5.
Choose your country or region.
6.
Time, currency and keyboard layout are settings which can be changed later on, in the control panel.
7.
To type a username, click on
in the left bottom corner or use a USB
Keyboard:
CS25, Operation
15
16
CS25, Operation 8.
Check the box Type without the keyboard and press OK .
9.
CS25, Operation
Choose a username & unit name, using the on-screen keyboard.
10.
If required, choose your password.
11.
Enter your Windows License Product Key, as noted in step 2.
12.
Read and accept the license terms.
13.
Choose your settings for updates, date and time.
14.
Choose your settings for Windows Update.
17
18
CS25, Operation 15.
How to activate Windows (It is possible to activate Windows now or later.) Via Ethernet: • Requires an Internet connection • Connect Ethernet cable for access to local network and Internet • Choose to activate Windows now and online Via Wi-Fi/WLAN: • Requires an Internet connection • Connect via Wi-Fi/WLAN to a local network and/or Internet • Choose to activate Windows online now Windows should automatically connect to internet and activate. It is also possible to activate Windows via toll-free automatic phone activation.
16.
CS25/CS25 LRBT/CS25 GNSS Windows Activation Guide 1) Make sure you have your Windows License Product Key code available. This will be needed when activating your license. 2) Establish a connection by connecting your unit using Wi-Fi or by connecting an Ethernet cable. 3) Once you have established a connection, click on the Start/Windows button. 4) Control Panel 5) System and Security 6) System 7) Scroll down to the bottom of the screen and click on the text: You must activate today, activate Windows now.
CS25, Operation
19
20
CS25, Operation
1) Click on Activate Windows online now. 2) When it is finished you can close the window. If you are not able to establish an Ethernet or Wi-Fi connection you can choose See other ways to activate. Choose Use the automated phone system and follow the instructions. 17.
After installing the System software please insert the Leica USB-Stick with the application Software and follow the instructions.
2.1
Inserting and Removing a SIM Card
• • • •
Keep the card dry. Use it only within the specified temperature range. Do not bend the card. Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent damage to the card. CAUTION
CS25, Operation
Always ground yourself to remove any static charge before touching the CPU card. The electronic devices are sensitive to static electricity. Precautions: 1) Only experienced personnel should open the mechanical housing of the tablet computer. 2) Use a grounding wrist strap all the time. 3) Place all the electronic components in a static-dissipative surface or staticshielded bag when they are not in the chassis.
21
22
CS25, Operation
Apply general practice for working with static-sensitive devices when you open the CS25 tablet computer, insert the SIM card and closing the CS25 tablet computer: • Discharge any static charge before opening the CS25 tablet computer and working with the SIM card • CS25 tablet computer must not be subject to high electrostatic potentials when it is open • Minimise contact with internal components of the CS25 tablet computer • Avoid any discharges of static electricity near the CS25 tablet computer when inserting the SIM card
3 LOCK OPEN
4
CS25_011
LOCK OPEN
Insert and remove a SIM card step-by-step
5
Step
The SIM card is inserted into a SIM card holder inside the CS25 tablet computer. For CS25 LRBT: Remove the Long Range Bluetooth module labelled 'bluegiga' before inserting the SIM card.
1.
Turn off the CS25 tablet computer. Refer to " Keys".
2.
Turn over the CS25 tablet computer to the underside.
3.
Loosen the screws inside the cover using the screwdriver end of the stylus.
4.
Detach the cover from the CS25 tablet computer.
5.
6.
CS25, Operation
Description
For CS25 GNSS: Detach the cover carefully to not damage the cables of the Helix antenna.
Slide the SIM card firmly into the slot.
Do not force the card into the slot. The card should be held with the contacts facing the slot.
Close the SIM card holder and push into locked position.
7.
Attach the slot cover and tighten the screws.
8.
To remove the card, detach the slot cover of the CS25 tablet computer.
9.
Open the SIM card holder and remove the SIM card. 23
24
CS25, Operation Step
Description
10.
Remove the SIM card and attach the slot cover.
3
Technical Data
Environmental specifications
Temperature Type
Operating temperature [°C]
Storage temperature [°C]
Tablet computer
-23 to +60
-40 to +70
Protection against water, dust and sand Type
Protection
Tablet computer
IP65 (IEC60529) Dust tight Protected against water projected in jets from any direction.
Humidity
CS25, Technical Data
Type
Protection
Tablet computer
Up to 90 % The effects of condensation are to be effectively counteracted by periodically drying out the tablet computer.
25
26
CS25, Technical Data Conformity to national regulations
• •
•
FCC Part 15 (applicable in US) Hereby, Leica Geosystems, declares that the product CS25 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity is available from Leica Geosystems AG. Class 2 equipment according European Directive 1999/5/EC (R&TTE) for which following EEA Member States apply restrictions on the placing on the market or on the putting into service or require authorisation for use: • France • Italy • Norway (if used in the geographical area within a radius of 20km from the centre of Ny-Ålesund) The conformity for countries with other national regulations not covered by the FCC part 15 or European directive 1999/5/EC has to be approved prior to use and operation.
Conformity to national regulations
• •
•
CS25, Technical Data
FCC Part 15, 22 and 24 (applicable in US). Hereby, Leica Geosystems AG, declares that the CS25 LRBT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and other applicable European Directives. The declaration of conformity may be consulted at http://www.leica-geosystems.com/ce. Class 1 equipment according European Directive 1999/5/EC (R&TTE) can be placed on the market and be put into service without restrictions in any EEA Member state. The conformity for countries with other national regulations not covered by the FCC part 15, 22 and 24 or European directive 1999/5/EC has to be approved prior to use and operation.
27
Ask your local Leica Geosystems dealer/sales representative for more information about our TQM program.
Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Switzerland Phone +41 71 727 31 31 www.leica-geosystems.com
Original text
Printed in Switzerland © 2013 Leica Geosystems AG, Heerbrugg, Switzerland
Leica Geosystems AG, Heerbrugg, Switzerland, has been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality Systems (ISO standard 9001) and Environmental Management Systems (ISO standard 14001).
812308-1.0.0en
Total Quality Management: Our commitment to total customer satisfaction.
