Transcript
Spec No. 1706
[REV. 07.20.17] Page 1/3
Model No.
LER-2127-IAV
LER Series racks are UL 2416 Listed
• LER Series rack with installed accessories • 21U (42.875”H) x 27.00”D x 23.06”W E.I.A. compliant welded rack includes a number of installed accessories commonly used in AV applications. Rack Construction & Features The LER series rack is fully welded 16-ga. steel with 14-ga. base reinforced at loadbearing junctions for strength equivalent to 11ga. steel. Features include welded sides with vents, solid top with vents, open front with top/bottom vents, beveled corners, recessed rear door with vents and key lock, compound knockout panels above/below rear door (.5” for wireless antennas, 1.25–0.875 and 2.0–1.375 for conduit), and a blank project panel below door. Includes one pair front mounting rails tapped 10-32 with 1.75” clearance to outside frame (fully adjustable front-to-rear), base with full size opening for cables, and a grounding stud. Load capacity 500 lbs. Black wrinkle powder epoxy finish. EIA/TIA/RoHS compliant. UL2416 Listed. Installed Accessories • Rear Rails RRD-21 (1 pr.): Tapped 10-32, fully adjustable frontto-rear. • Utility Shelves (3): 16-ga. steel two-part shelf with bottom vents, front/rear flanges (similar to USVC series shelf but without the hold-down bars). Measures 2U x 15”D x 19”W (17.31” usable, 50 lbs. load rating). Black semi-gloss powder epoxy finish. • Variable-Depth Shelf VDS-2-2032 (1): 2U x 20-32”D (adjustable) x 19”W supports 250 lbs.—requires front and rear rail support. • Vent Panels SVP-2 (3): 20-ga.steel, 2U x 19”W, flange. • Horizontal Cable Managers CMBS-4 (3): 14-ga. steel stackable bar with slots, 4” offset. • Vertical Cable Manager CMV3-12 (1): 16-ga. steel velcro post tie with square/round holes, 3.25”W x 21.00”H.
A&E Specifications The E.I.A. compliant, UL2416 Listed welded equipment rack shall be Lowell Model LER-2127-IAV which shall measure 23.06”W x 27.00”D x 42.875”H with 21U racking space. The rack shall be 16-ga. certified U.S. steel with 14-ga. steel base reinforced at all loadbearing junctions. It shall feature a solid top with vents, open base with grounding stud, open front with vents at top/bottom, welded side panels with vents, recessed rear door with vents and key lock, compound knockout panels above/below rear door (including 0.5” for wireless antennas, 1.25–0.875 and 2.0–1.375 for conduit), blank project panel below rear door, pair of front rails tapped 10-32 (adjustable), and black wrinkle powder epoxy finish. Additionally, the rack shall include these mounted accessories: pair of rear rails tapped 10-32 (adjustable), three 16-ga. steel two-part utility shelves (2U x 15”D x 19”W, 50 lbs. load capacity, vented base), one variable-depth steel shelf (2U x 20-32”D x 19”W, 250 lbs. load capacity), three steel vent panels (2U x 19”W, steel with flanges), one UL Listed power strip (twelve 15A single outlets, 12 ft. attached cord with plug, transient voltage surge suppression), three horizontal cable managers (19”W steel bars, stackable, 4” offset), one vertical cable manager (3.25”W x 21.00”H), mobile base with swivel casters designed to protect fine floors. Optional (order separately) • LFD-21: Surface-mount front door with key lock — solid steel with black wrinkle powder epoxy finish. Mounts left or right. • LFD-21FV: Surface-mount front door with key lock — fully vented steel with black wrinkle powder epoxy finish. Mounts left or right. • LFD-21P: Surface-mount front door with key lock — black steel frame with smoked plexiglass insert. Mounts left or right.
• Power Strip ACS-1512 (1): 32”H x 1.625”W x 1.375”D, 15A with 12 single outlets, 12-ft. attached cord, transient voltage surge suppression, circuit breaker. UL Listed. Imported. • Mobile Base LMB-27F (1): Base with premium swivel casters to protect fine floors like marble, wood and tile. Model Summary Model No.
Rack Height
LER-2127-IAV
42.875”
Panel Rack Useable Space Depth Depth
21U
27.00”
24.34”
Rack Width
Front Door
Rear Door
23.06”
---
vented
Total Utility Vari-Depth Vent Power Rails Shelves Shelf Panels Strrip
2 pr
3
1
3
1 (15A)
Horizontal Vertical Mobile Cable Mgrs Cable Mgr Base
3
1
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com
1
Spec No. 1706
[REV. 07.20.17] Page 2/3
Technical Drawings Measurements are inches except as noted.
Rack without accessories VENTED TOP FOR FAN APPLICATIONS
27.00”
23.063”
2" & 1.375" K.O.'S 4X 1.25" & .875" K.O'S 3X TOP
.5" ANTENNA 2X 27.000”
18.312” CL TO CL
42.875”
36.750”
FRONT
SIDE
REAR
REMOVABLE KNOCK OUT PANELS 4X
BLANK PANEL 2" & 1.375" K.O.'S 2X
1.25" & .875" K.O'S 3X
BASE
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com
Spec No. 1706
[REV. 07.20.17] Page 3/3
Rack with installed accessories
23.06 (586mm)
USVC-215 SHELF ONLY SVP-2
CMBS-4
USVC-215 SHELF ONLY SVP-2
44.10 (1120mm)
CMBS-4
36.88 (937mm) 21 U
CMBS-4
USVC-215 SHELF ONLY
CMBS-4
SVP-2 VDS-2-2032
1.15 (29mm)
FRONT VIEW
LMB-27F
ACS-1512
LEFT SIDE INTERIOR VIEW SIDE PANEL IS NOT REMOVEABLE
REAR VIEW WITHOUT DOOR DOOR IS REMOVEABLE
CMV3-12
RIGHT SIDE INTERIOR VIEW SIDE PANEL IS NOT REMOVEABLE
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com
