Transcript
COMPONENT SPECIFICATIONS 49990-xxx 49800-xxx
Fast-Cure® Anaerobic Adhesive-Style Connectors
Leviton’s Fast-Cure anaerobic adhesive-style connectors are designed for quick and easy termination in the field. Fast-Cure connectors are available in singlemode and multimode versions in ST®, SC, FC, and LC styles. Fast-Cure connectors are designed for indoor and outdoor applications where reliability, durability, and ease of installation are an important consideration. Typical installations are in premise LAN environments, or anywhere adhesive-style connectors are specified.
FEATURES • • • • •
Typical termination in less than two minutes Low insertion loss connection Higher fiber retention than mechanical connectors No curing oven or proprietary tool required Compatible with MOS, QuickPort®, Opt-X®, and LightSpace® adapter plates • Accessory for duplex clip sold separately
DESIGN CONSIDERATIONS • • • • • •
Single-mode and multimode versions Precision pre-radiused zirconia ferrules Supports 900 µm buffered fiber or 3 mm jacketed fiber High cable retention crimp for jacketed fiber Recommended for indoor and outdoor usage Body of ST and FC connectors are metal
PERFORMANCE SPECIFICATIONS Pictured (left to right): ST Connector, SC Connector, FC Connector, and LC Connector.
SPECIFICATION
The Fast-Cure anaerobic adhesive-style fiber optic connector shall meet or exceed the requirements described in TIA-568-C.3 and 604 standards. Connector shall be field-polished, field-installable, and does not require a curing oven or proprietary tool to facilitate the termination of the fiber. Connector shall be available in LC, SC, FC or ST, single-mode or multimode configurations terminated on 900 µm buffered fiber or 3 mm jacketed fiber. Typical connector Insertion Loss shall be 0.2dB. Typical connector Return Loss shall be greater than 25dB (multimode) and 55dB (single-mode).
Parameter
Value
Insertion Loss (Single-mode or Multimode)
Typical: 0.2dB Max: <0.3dB
Return Loss (Single-mode)
Typical: >55dB
Return Loss (Multimode)
Typical: >25dB
Operating Temperature
-40 ºC to +85 ºC
STANDARDS COMPLIANCE
• Meets TIA-568-C.3 performance requirements • Meets TIA-604-2 (ST), -3 (SC), -4 (FC), -10A (LC) Connector Intermateability Standards • Meets GR-326; General Requirement for Single-mode Connectors
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit www.leviton.com.
Page 1 of 2
Leviton Network Solutions, a division of Leviton Mfg. Co., Inc. 2222 - 222nd St. SE Bothell, WA 98021 Tech Support: 1.800.722.2082 or +1.425.486.2222 Fax: 1.425.485.9170 www.leviton.com Copyright © 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
49990-xxx 49800-xxx
APPLICATION
FC
COMPONENT SPECIFICATIONS 49990-xxx 49800-xxx FC 1.41"
ST ST
1.41"
2.35"2.35" .38"
.38"
ELECTRONIC FILES .39"
2.35" ST FC .39" 1.47" visit .56" For CAD files, typical specs, or dimensional line art (.DXF, .DWG, Visio), www.leviton.com. 1.41"
FC
LC
.39" .39" .39" .38"
.39"1.58" .70" .39"
LC .38"
2.29" .50"
1.58" 1.58" .50"
.50" 1.58" .50" .10" 1.58"
.10"
.38"
SC
.38"
1.47" .60"
.32"
SC
.37" 1.93"
.05"
[1.25 mm]
.60"
[2.5 mm] .10" [2.5 mm]
.10"
.38" .60"
.10" .10" .60" [2.5 mm]
.56"
.60" .56"
.56" .10" .10"
.56"
[2.5 mm]
[2.5 mm]
.10"
.56"
1.48"
SC
.10"
[2.5 mm]
1.48" .10" [2.5 mm] .10" [2.5 mm]
1.48" .60"
2.53"
[2.5 mm]
[2.5 mm] .10" [2.5 mm] [2.5 mm]
.10" [2.5 mm]
[2.5 mm]
Fast-Cure SC Connector
SC
2.53"
Side View, w/ 3 mm boot.10" Front .32" .32" [2.5View mm] .32" .60" .32" .10" [2.5 mm] .32" 1.82" 2.53" .10" [2.5 mm] .56" 2.53" [2.5 mm] .10" .32" [2.5 mm] 2.53" .10" 2.53" [2.5 mm] .10" .32" [2.5 mm] .10" 2.53" Side View, w/ 900 µm boot [2.5 mm] .10"
1.82"
.32" .32" .32" .32"
2.53"
.37" 1.26" .37"
.56" .56"
.38"
.32" .37"
.10"
.56" .60" 1.48" Side µm boot .38" View, w/ 900 1.48" .10" 1.48" .56"
.38" .56"
1.47"
.38"
.38" 1.93".50" 1.58" .38" mm] [1.25 mm] .10" [2.5.05" .38" .37" 1.93" .38" 1.93" SC [1.25mm] mm] 1.93" .05" [1.25 .05" 1.93" [1.25 mm] .05" Side View, w/ 9001.26" µm boot [1.25 mm] [1.25 mm] .05" .05" 1.93" [1.25 mm] .05" .37" .32"
.38"
.56" 1.47" .56"
1.47"
.38"
SC
[2.5 mm]
2.35"
2.35"
SC .32"
.10"
1.48"
1.47"
[2.5 mm]
[2.5 mm]
2.35" Fast-Cure ST® Connector 2.35" 2.35" Side View, w/ 3 mm boot Front View .56" 1.47"
.38" .38"
SC
.10"
1.48"
.38"
ST
.38"
LC
.56"
1.47"
ST .38" .38"
[1.25 mm] .05" Front View
SideLC View, w/ 3 mm boot
.39"
ST ST
.50" .10" [2.5 mm] [2.5 mm] .10" [2.5 mm] .10" [2.5 mm] .50" .10" [2.5 mm]
LC 2.29"LC 1.93" LC Fast-Cure LC Connector
.38"
.10"
1.82" 1.82" 1.82"
1.82"
.10"
.10" .10" 1.82" [2.5 mm]
[2.5 mm] [2.5 mm] .10" [2.5 mm] .10" [2.5 mm] [2.5 mm]
LEVITON FAST-CURE CONNECTORS .10" [2.5 mm]
.37"
1.26" .05" [1.25 mm] [1.25 mm] .05" 1.26" 1.26" 1.26" [1.25 mm] .05" [1.25 mm] .05" [1.25 LEVITON TOOLKITS & ACCESSORIES mm] .05" 1.26" Description Part [1.25No. mm] .05"
Description
Part No.
® .32" Fast-Cure ST Multimode
49990-MST
Fast-Cure ST Single-mode
49990-SST
49800-MTK
Fast-Cure SC Multimode, .10"beige [2.5 mm]
49990-MSC
49800-FTK
Fast-Cure SC LOMM, aqua
49990-LSC
49800-CON
Fast-Cure SC Single-mode, blue
49990-SSC
49886-DSC
Fast-Cure LC Multimode, beige w/ 3 mm boot
49990-ML2
LC Duplex Clip, beige, MM (bag of 25)
49886-DLM
Fast-Cure LC LOMM, aqua w/ 3 mm boot
49990-LL2
LC Duplex Clip, blue, SM (bag of 25)
49886-DLS
Fast-Cure LC Multimode, beige w/ 900 um boot
49990-MDL
Fast-Cure LC LOMM, aqua w/ 900 mm boot
49990-LDL
Fast-Cure LC Single-mode, blue w/ 3 mm boot
49990-SL2
Fast-Cure LC Single-mode, blue w/ 900 um boot
49990-SDL
Fast-Cure FC Multimode
49990-MFC
Fast-Cure FC Single-mode
49990-SFC
Light Tool Kit .37"Fast-Cure Tool Kit
Consumable Kit SC Duplex1.26" Clip, black (bag of 25) .05"
[1.25 mm]
1.82"
NOTE: Both single-mode and multimode SC, ST, and FC connectors come with a 3 mm and 900 µm boot. ST is a registered trademark of AT&T Inc.
Page 2 of 2
H/10 #3471
Leviton Network Solutions, a division of Leviton Mfg. Co., Inc. 2222 - 222nd St. SE Bothell, WA 98021 Tech Support: 1.800.722.2082 or +1.425.486.2222 Fax: 1.425.485.9170 www.leviton.com Copyright © 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
49990-xxx 49800-xxx
.39"
.70" Fast-Cure FC Connector .10" [2.5 mm] FC .70" .39" 1.41" [2.5 mm] FCw/ 3 mm.50" Side View, boot .10" Front View FC 1.41" .50" 2.29" 1.41" FC.39" .70" 1.41" .39" 2.29" .10" [2.5 mm] .39" .39" .50" .70" .39" .70" .10" [2.5 mm] 1.58" 2.29" .70".50" .50" .10" [2.5 mm] .10" [2.5 mm] .50" .10" [2.5 mm] .70" Side View, w/ 900 µm boot .50" ST 1.58" .50"2.29" .10" [2.5 mm] 1.41" .39" 2.29".10" .50" [2.5 mm] LC 2.29"
