Preview only show first 10 pages with watermark. For full document please download

Lg G3 Hotspot And Tethering Instructions

   EMBED

Share

Transcript

LG G3 Wi-Fi / USB Tethering Instructions Wi-Fi Hotspot: 1. Go to Settings > Tethering & networks > Wi-Fi hotspot and tap the On/Off switch. 2. An explanation will appear on the screen; enter a password composed of 8 characters and select Save. 3. On the client device, use the Wi-Fi network and password that was associated with the hotspot to connect. USB Tethering: Generally the best strategy is to use the device as an RNDIS network interface, rather than dialing out directly as a modem: 1. Prepare the client computer with the proper driver a. Windows Vista or later should work without additional software b. Windows XP users may need to install ActiveSync 4.5 or later. They may need an Internet connection to do this. c. OS X users will need to download the HoRNDIS driver from http://joshuawise.com/horndis (3rd-party website) d. Most Linux distributions will work without additional software 2. Connect the device to a computer via a USB cable 3. Wait for the client computer to recognize the device 4. On the device, go to Menu > Settings > Tethering & networks and tap the On/Off switch. 5. Wait for the client computer to recognize the device as a new network connection a. Depending on your operating system, you may or may not see anything happen. b. OS X users may see a message on the phone about Android File Transfer, which they can ignore The Internet should now be available on the client computer; turn Wi-Fi off, open a web browser, and verify that you can view web pages.