Transcript
LH1500AAB, LH1500AABTR, LH1500AT www.vishay.com
Vishay Semiconductors
1 Form A Solid-State Relay FEATURES
SMD
S
S'
• Current limit protection • Isolation test voltage 5300 VRMS
S 6
DC
S'
5
4
• Typical RON 20 • Load voltage 350 V • Load current 150 mA
DIP
• High surge capability • Clean bounce free switching • Low power consumption 1
2
3
• SMD lead available on tape and reel • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
i179041-2
DESCRIPTION
APPLICATIONS
The LH1500 is robust, ideal for telecom and ground fault applications. It is an SPST normally open switch (1 form A) that replaces electromechanical relays in many applications. It is constructed using a GaAIAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated technology, is comprised of a photodiode array, switch control circuitry and MOSFET switches. In addition, it employs current-limiting circuitry which meets lightning surge testing as per ANSI/TIA-968-B and other regulatory voltage surge requirements when overvoltage protection is provided.
• General telecom switching • Instrumentation • Industrial controls
AGENCY APPROVALS UL1577: CSA: BSI: FIMKO:
file no. E52744 system code H, double protection certification 093751 no. 7979 and 7980 25419
ORDERING INFORMATION L
H
1
5
PART NUMBER
0
0
#
#
ELECTR. VARIATION
PACKAGE
#
PACKAGE CONFIG.
T
TAPE AND REEL
7.62 mm
SMD
> 0.1 mm
UL, CSA, BSI, FIMKO
SMD-6
LH1500AAB
SMD-6, tape and reel
LH1500AABTR
DIP-6, thru hole
Rev. 2.0, 25-Jul-11
DIP
R
LH1500AT
1
Document Number: 83804
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LH1500AAB, LH1500AABTR, LH1500AT www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Pdiss
550
mW
VR
8
V
IF
50
mA
INPUT SSR output power dissipation (continuous) IR 10 mA
LED reverse voltage LED continuous forward current OUTPUT
IL 50 mA
VL
350
V
Continuous DC load current - bidirectional
Tamb = 25 °C
IL
150
mA
Continuous DC load current - unidirectional
Tamb = 25 °C
IL
250
mA °C
DC or peak AC load voltage
SSR Ambient temperature range
Tamb
- 40 to + 85
Storage temperature range
Tstg
- 40 to + 150
°C
Tsld
260
°C
Soldering temperature (1)
t = 10 s maximum
Isolation test voltage (for 1 s) Isolation resistance
VISO
5300
VRMS
VIO = 500 V, Tamb = 25 °C
RIO
1012
VIO = 500 V, Tamb = 100 °C
RIO
1011
Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP).
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
0.9
2
UNIT
INPUT LED forward current, switch turn-on
IL = 100 mA, t = 10 ms
IFon
LED forward current, switch turn-off
VL = ± 300 V
IFoff
0.2
0.8
IF = 10 mA
VF
1.15
1.25
3
LED forward voltage
mA mA
1.45
V
20
25
4.6
6.25
OUTPUT On-resistance, AC/DC: pin 4 (±) to 6 (±)
IF = 5 mA, IL = 50 mA
RON
On-resistance, DC: pin 4, 6 (+) to 5 (-)
IF = 5 mA, IL = 100 mA
RON
Off-resistance Current limit AC (1): pin 4 (±) to 6 (±) Off-state leakage current Output capacitance, pin 4 to 6 Switch offset
IF = 0 mA, VL = ± 100 V
ROFF
0.5
300
IF = 5 mA, t = 5 ms, VL = ± 6 V
ILMT
230
255
370
IF = 0 mA, VL = ± 100 V
IO
0.32
200
nA
IF = 0 mA, VL = ± 350 V
IO
1
μA
G mA
IF = 0 mA, VL = 1 V
CO
33
IF = 0 mA, VL = 50 V
CO
10
pF
IF = 5 mA
VOS
0.2
μV
VISO = 1 V
CIO
0.71
pF
pF
TRANSFER Capacitance (input to output)
Notes • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. (1) No DC mode current limit available.
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER
TEST CONDITION
SYMBOL
TYP.
MAX.
UNIT
Turn-on time
IF = 5 mA, IL = 50 mA
ton
0.3
2
ms
Turn-off time
IF = 5 mA, IL = 50 mA
toff
0.6
2
ms
Rev. 2.0, 25-Jul-11
MIN.
2
Document Number: 83804
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LH1500AAB, LH1500AABTR, LH1500AT www.vishay.com
Vishay Semiconductors
150
10
120
8
LED Reverse Current (µA)
Load Current (mA)
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
90 IFon = 2.0 mA I = 3.0 mA 60 Fon IFon = 4.0 mA 30 IFon = 5.0 to 20 mA 0 - 40
ilh1500at_00
4 2
0 - 20 0 20 40 60 Ambient Temperature (°C)
T = - 40 °C T = 25 °C T = 85 °C
6
80
0
8
Fig. 1 - Recommended Operating Conditions
16
24
32
40
48
LED Reverse Voltage (V)
ilh1500at_03
Fig. 4 - LED Reverse Current vs. LED Reverse Voltage
1.5 IF = 50 mA
IF = 20 mA 1.4 1.3 1.2 IF = 1.0 mA 1.1
IF = 2.0 mA IF = 5.0 mA IF = 10 mA
1.0
- 40 - 20 0 20 40 60 Ambient Temperature (°C) ilh1500at_01
80
LED Current for Switch Turn-on (%) Norm. at 25 °C
LED Forward Voltage (V)
1.6 60 40 20 0 - 20 - 40 - 60 - 40 - 20
80
ilh1500at_04
Fig. 2 - LED Voltage vs. Temperature
0
20
40
60
80
Temperature (°C)
Fig. 5 - LED Current for Switch Turn-on vs. Temperature
120
1.25
100
LED Forward Voltage (V)
LED Forward Current (mA)
IL = 100 mA
T = 85 °C T = 25 °C T = - 40 °C
80 60 40 20 0
1.2 IL = 100 mA 1.15 1.1 1.05 1
0 ilh1500at_02
0.5
1
1.5
- 40 - 20
2
ilh1500at_05
LED Forward Voltage (V)
Fig. 3 - LED Forward Current vs. Forward Voltage
Rev. 2.0, 25-Jul-11
0
20
40
60
80
Temperature (°C)
Fig. 6 - LED Dropout Voltage vs. Temperature
3
Document Number: 83804
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LH1500AAB, LH1500AABTR, LH1500AT www.vishay.com
Vishay Semiconductors
4
40 Change in Current Limit (%) Normalized to 25 °C
20
On-resistance Variation (%) Norm. at IF = 5 mA
IF = 5.0 mA t = 5.0 ms VL = see elec. char.
30
10
0 - 10 - 20 - 30 - 40 - 40 - 20
0
20
40
60
2
1
0 -1
80
0
4
Fig. 7 - Current Limit vs. Temperature
8
12
16
20
LED Forward Current (mA)
ilh1500at_09
Ambient Temperature (°C)
ilh1500at_06
IL = 50 mA 3
Fig. 10 - Variation in On-Resistance vs. LED Current
50
400
IF = 0 mA 300
Capacitance (pF)
Load Current (mA)
40 T = - 40 °C T = 25 °C T = 85 °C
200
100
20 10
IF = 5 mA
0
0
0
1
ilh1500at_07
2 3 Load Voltage (V)
4
5
0 10 20 30 40 50 60 70 80 90 100 ilh1500at_10
Fig. 8 - Load Current vs. Load Voltage
40
0.14
30
0.12
20
IF = 5 mA IL = 50 mA
10 0 -1 - 20
ilh1500at_08
0.08 0.06 0.04 RL = 600 Ω
0 20 40 Temperature (°C)
60
0 102
80
ilh1500at_11
Fig. 9 - On-Resistance vs. Temperature
Rev. 2.0, 25-Jul-11
0.1
0.02
- 30 - 40 - 40 - 20
Applied Voltage (V)
Fig. 11 - Switch Capacitance vs. Applied Voltage
Insertion Loss (dB)
Change in Ron (%) Norm. to 25 °C
30
103 104 Frequence (Hz)
105
Fig. 12 - Insertion Loss vs. Frequency
4
Document Number: 83804
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LH1500AAB, LH1500AABTR, LH1500AT www.vishay.com
Vishay Semiconductors 8 Change in Breakdown Voltage (%) Normalized to 25 °C
Off-State Leakage Current (nA)
1000 100 10 T = 85 °C T = 70 °C T = 50 °C T = 25 °C
1 0.1
IF = 0 mA 100
200 300 400 Load Voltage (V)
ilh1500at_12
500
0 -2 -4 -6
120
3.5
100
3.0
80 60 VP = 10 V RL = 50 Ω
40 20 0
102 ilh1500at_13
103
104 105 Frequency (Hz)
20
40
60
80
IF = 5 mA
2.5 2.0 1.5 1.0 0.5 0
106
20 ilh1500at_16
Fig. 14 - Output Isolation
30
40
50
60
70
80
90
Ambient Temperature (°C)
Fig. 17 - Switch Offset Voltage vs. Temperature
0.6
50
0.5
30
Switch Offset Voltage (µV)
T = - 40 °C T = 25 °C T = 85 °C
40
20 IF = 0 mA IL < 50 µA
10 0
0
Ambient Temperature (°C)
Fig. 16 - Switch Breakdown Voltage vs. Temperature
Switch Offset Voltage (µV)
Isolation (dB)
2
ilh1500at_15
Fig. 13 - Leakage Current vs. Applied Voltage
Load Current (µA)
4
-8 - 40 - 20
0.01 0
6
0.4 0.3 0.2 0.1 0
0
ilh1500at_14
100
200 300 Load Voltage (V)
400
500
0 ilh1500at_17
Fig. 15 - Switch Breakdown Voltage vs. Load Current
Rev. 2.0, 25-Jul-11
5
10
15
20
25
LED Forward Current (mA)
Fig. 18 - Switch Offset Voltage vs. LED Current
5
Document Number: 83804
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LH1500AAB, LH1500AABTR, LH1500AT Vishay Semiconductors
30
3
20
2.5 Turn-on Time (ms)
Change in Turn-on Time (%), Norm. to 25 °C
www.vishay.com
10 0
IF = 5 mA IL = 50 mA
- 10 - 20
1.5
T = 85 °C T = 25 °C T = - 40 °C
1 0.5
- 30 - 40 - 20 ilh1500at_18
0 0 20 40 Temperature (°C)
60
0
80
10
ilh1500at_20
Fig. 19 - Turn-on Time vs. Temperature
20 30 LED Current (mA)
40
50
Fig. 21 - Turn-on Time vs. LED Current
0.90
30 20
0.80 T = - 40 °C Turn-off Time (ms)
Change in Turn-off Time (%) Norm. to 25 °C
IL = 50 mA 2
10 0 - 10 - 20
IF = 5 mA IL = 50 mA
- 30 - 40 ilh1500at_19
- 20
0.70
T = 25 °C
0.60 T = 85 °C 0.50 IL = 50 mA
0
20
40
60
0.40
80
Temperature (°C)
0
10
ilh1500at_21
Fig. 20 - Turn-off Time vs. Temperature
20
30
40
50
LED Forward Current (mA)
Fig. 22 - Turn-off Time vs. LED Current
PACKAGE DIMENSIONS in millimeters DIP
Pin one ID 3
2
1
6.5 6.3
ISO method A
4
5
6
8.7 8.5 7.62 typ.
1 min.
3.81 3.30 4° typ.
18° typ. 0.051 min. 0.9 0.8
0.55 0.45
3.81 2.79
0.35 0.25 8.82 7.62
i178001
2.54 typ.
Rev. 2.0, 25-Jul-11
6
Document Number: 83804
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LH1500AAB, LH1500AABTR, LH1500AT www.vishay.com
Vishay Semiconductors
SMD 8.71 8.51
Pin one ID
0.76 6.50 6.30
R 0.25
2.54
1.78 8 min. 11.05
1.52
1.27 typ. 10.03 9.63
ISO method A
1.33 1.22
0.99 min.
7.62 typ. 3.81 3.30
0.25 0.10
3° to 7°
18°
4° 1.016 2.54
0.508
8 min.
0.31 0.20
i178002
PACKAGE MARKING LH1500 V YWW H 68 Note • Tape and reel suffix (TR) is not part of the package marking.
Rev. 2.0, 25-Jul-11
7
Document Number: 83804
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice www.vishay.com
Vishay
Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
