Preview only show first 10 pages with watermark. For full document please download

Librestream Patient Camera For Fixed Equipment

   EMBED

Share

Transcript

Quick Reference Guide Librestream Patient Camera for Fixed Equipment Service Desk 204-940-8500 Option 4 or toll-free 1-866-999-9698 Option 4 Instructions 1 Connect the patient camera to your video conference equipment. 2 Press the Power button to turn the camera on and press Skip when prompted for a log in. 3 Press the Aux button on the Tandberg remote control to display the patient camera image to the far end site. 4 Point the camera at the subject or image and press the Zoom +/- buttons on back of camera. The camera will automatically refocus. 5 If a still image is required, zoom in and out until you have the appropriate image in view then press and hold the Image Capture button on top of camera to freeze the image. Press it again to unfreeze the image and return to normal viewing. 6 Once completed, press the Main Cam button on the Tandberg remote control to return to displaying the main camera image to the far end site. 7 Turn off the power by pressing and holding the Power button. Aux Main Cam Video In 2. Aux S-Video Cable Image Capture Light Zoom +/- Power Back of Camera Additional Instructions Use the Light for oral viewing during ENT and Anesthetic assessments. You may want to keep the camera plugged in during the session if the battery does not hold the charge long enough. Note: Plug the camera in to recharge the batteries when not in use. www.mbtelehealth.ca Rev 11May2017