Lift Truck Monitor

Transcript

Lift Truck Monitor K-RANGE GC35K – 70K Cushion Tire Trucks CEOC1430 1 Contents Introduction Market Focus Opportunity Target Industries Product Configuration Models and Capacities Standards Compliance Product Presentation Quality Reliability Customer Service Appendix 1: Noise, vibration and emissions, fuel consumption Appendix 2: Truck specification sheet Appendix 3 Mast Charts and Residual Capacities Introduction Overview Why will your customer buy from you? Surveys show customers place great importance on the operator comfort & productivity, the reliability of the product and the support they receive from the dealer throughout the life of the product. With this in mind, Cat® Lift Trucks looked closely at what could be improved on the previous generation trucks and, just as important, what needed to stay exactly the same. The result of this product development is the GC35K – GC70K Internal Combustion (IC) Cushion Tire Lift Trucks, a family of trucks that are sure to set the standard in productivity and quality. Also expect superior customer service backed by the #1 dealer network in the industry. The three product attributes that Cat lift trucks are built around cover all the important aspects of a product that a customer expects to find. Quality Superior operator comfort Added operator protection Increased operator awareness K-Range counter balance IC truck range GC35K – 70K Reliability Uncompromising performance Manufactured for reliability Designed for uptime in tough applications Standard features that maximize productivity Option packages to fit any application Quick and easy service Customer Service Complete acquisition solutions Industry’s best warranty Comprehensive aftermarket service and support Industry’s #1 dealer network                              3/43 CEOC1430 MARKET FOCUS Market opportunity Target Industries Class IV Opportunity IC cushion tire lift trucks are one of the most popular type of material handling equipment sold in North America. Class IV – IC cushion tire lift trucks – make up 16% of the total sales of lift trucks in North America. In the European market the trucks are small percentage of the market, mainly used for automobile manufacturers, the paper industry and some bottling plants. Market by Capacity The capacities covered by the GC35K – GC70K (also called large internal combustion cushion tire trucks) model family make up approximately 11% of all IC cushion sales for all manufacturers in North America. The 4000kg capacity is the most popular size in large IC cushion tire trucks. It accounts for about 43% of the entire market for large cushion tire trucks. Currently, there are many competitive brands on the market represented by manufacturers from all over the world. The top brands include Mitsubishi Forklift Trucks, Toyota, Hyster, Yale, Nissan, Komatsu, Daewoo and Clark. C35K – GC70K Models Target Industries The industry segments listed below are a good starting point when looking for new large IC cushion tire lift truck prospects. These segments represent the heaviest usage of IC cushion tire lift trucks. Rental Fleets Rental fleets are one of the largest consumers of these trucks by each capacity and thus as a whole family. This is due to the fact that many rental applications are suited for cushion tire lift trucks. Paper and Allied Products Paper industry is one of the biggest opportunity for these trucks which are typically used with paper roll clamp attachments. Load sizes in this industry have grown substantially over the years making this truck very valuable for the application. These establishments generally produce and handle paper and paper rolls. 4/43 CEOC1430 MARKET FOCUS General Warehousing and Storage Industries in warehousing and general storage are primarily engaged in operating warehousing and storage facilities for general merchandise, refrigerated goods, and other warehouse products. They may also provide a range of services, often referred to as logistics services, related to the distribution of goods. Logistics services can include labeling, breaking bulk, inventory control and management, light assembly, order entry and fulfillment, packaging, pick and pack, price marking and ticketing and transportation arrangement. These establishments generally handle goods in containers, such as boxes, barrels and/or drums. Manufacturing Industries The Manufacturing sector comprises establishments engaged in the mechanical, physical or chemical transformation of materials, substances or components into new products. Also assembling of component parts of manufactured products is considered manufacturing. Establishments in the Manufacturing sector are often described as plants, factories or mills and characteristically use power-driven machines and materials handling equipment. Fabricated Metal Industries The fabricated metal industries provides sales across the series. The major categories within this group are general fabricated metals, structural metals and stampings. Lumber and other Building Materials The lumber and other building materials industries are primarily engaged in selling lumber, and/or a general line of building materials, to the general public. The lumber they sell may include rough and dressed lumber, flooring, molding, doors, sashes, frames and other millwork. The building materials may include roofing, siding, shingles, wallboard, paint, brick, tile, cement, sand, gravel and other building materials and supplies. Also included in this group are home centers (ex. Home Depot). 5/43 CEOC1430 CONFIGURATION Models and Capacities GC35K – 70K STR Models and Capacities There are ten models within the GC35K-GC70K model family. These models represent four different frames, six different mast capacity designs and come with EPA compliant LPG fuel 69 kW GM V6 4.3 liter engines. SWB = short wheel base STR = short turning radius The GC35K – GC40K-STR are based on the same frame design. Specific simplex (standard), duplex (full free lift) and triplex (full free triple lift) masts are designed for these three models and include a Class III and IV carriage. GC45K-SWB – GC45K-STR are based on the same frame design with only a change in length to fork face. STR model has a short turning radius when compared to SWB model resulting from the lower length to fork face. Specific simplex, duplex and triplex masts are designed for these models and include a class III carriage. GC55K – GC55K-STR are based on the same frame design with only a change in length to fork face. STR model has a short turning radius when compared to SWB model resulting from the lesser length to fork face. Specific simplex, duplex and triplex masts are designed for these models and include a class IV carriage. GC60K – GC70K-STR are based on the same frame design with a change in the counterweight between GC60K and GC70K and GC70K-STR. 6/43 CEOC1430 STANDARDS COMPLIANCE Standards compliance Specific simplex, duplex and triplex masts are designed for these models and include a class IV carriage. All these model use GM 4.3 liter LPG engine offering superior torque, gradeability and drawbar pull. GC35K – GC70K Models In addition to all relevant global and national health and safety standards, the GC35K – GC70K are designed according to the highest standards using the latest technologies. ANSI ANSI/ITSDF All trucks within the GC35K – GC70K family are manufactured in accordance with the American National Standards Institute/Industrial Truck Standards Development Foundation B56.1. NFPA 505 All trucks within the GC35K – GC70K family are manufactured in accordance with National Fire Protection Association (NFPA) 505, Fire Safety Standard for Powered Industrial Trucks. UL UL 558 OSHA OSHA All trucks for the GC35K – GC70K family listed in the standard price list are manufactured in compliance with UL 558, Standard for Industrial Trucks, Internal Combustion Engine-Powered. Please note that some options ordered through the custom shop modifications (CSM) Group may void UL listing. Please inquire within the CSM group to determine the specific UL disposition on CSM options ordered. UL LPS type ratings are available as price list options. These ratings provide additional safeguards against fire hazards compared to those required for the types LP. To determine what classification your customer's application requires, refer to the Powered Industrial Trucks, Type Designations, Areas of Use, Maintenance and Operations, NFPA 505. In most cases, the customer's insurance carrier will have classified the application or “Area of Use” so they, too can be a source for clarification. All trucks within the GC35K – GC70K family are build in accordance with Occupational Safety and Health Administration (OSHA) Section 1910.178, safety standards. EMISSIONS: EPA & CARB EPA stands for the Environmental Protection Agency which measures and sets performance emission regulations for air, water and land pollution for the United States. EPA has adopted mandatory regulations with regards to fuel emissions. 7/43 CEOC1430 PRODUCT PRESENTATION Emission regulation compliant with EPA Brand Values Quality Reliability Customer service These regulations require manufacturers of forklifts to certify their engines and meet a minimum of the standard HC+NOx emissions. (hydrocarbon plus oxides of nitrogen and carbon monoxide (CO). See the Appendix for the actual data. The California Air Resource Board oversees the activities of 35 local and regional air pollution control districts within California. These districts regulate industrial pollution sources and set mandates within the state. Quality Secure On/Off Access Operator Comfort & Position All Around Visibility Instrument Panel Safety and Productivity Reliability Steel Frame & Body Drive Train – Powershift Transmission Keeping Productive Easy Maintenance Engine Variations Exhaust/Air Intake System Control System Hydraulic System Customer Service Worldwide parts and services network to support your operations. Secure On/Off Access Three Point Entry System Grab bar of 45cm Open step Hip restraint Operators of different heights can enter and exit the truck easily. The antislip open step allows for proper placement of the operators foot when entering or exiting the truck. The strong steel rubber coated hip restraint gives a stable point of entry into the truck. 8/43 CEOC1430 PRODUCT PRESENTATION Access Low entry step Grab bar handle Hip restraint Low Entry Step & Anti-Slip Step Plate Open step frame allows for easy entry. Natural step height provides a proper “step-up and step-down” Grab Bar Handle & Hip Restraint Anti-slip step plates are bolted on, rust proof and provide excellent gripping surface. The 45cm grab bar provides easy reach for all operator heights. It is mounted inside the operator compartment to reduce damage. A wrapped steel hip restraint offers third point of entry to the operator. Hip restraints offer operators extra support while seated. QUALITY GC35K – GC70K Models Full suspension seat Tilt steering column Parking brake Anti-cinch seat belt Floor mat Ergonomic controls Full suspention seat Full Suspension Seat Seat allows for the following adjustments: Forward/backward travel of 15 centimeters Adjustable lumbar support (using dial on left side of seat) Weight adjustment for firmness (using dial on front) Foot space Spacious Floor Area Wide floor area for plenty of feet room Better maneuverability when driving the unit. Floor mat is made of a raised textures to provide traction, while channeling water away from the operator’s feet, while isolating vibration and noise Tilt Steering Column Tilt steering column allows for adjusting and locking into position. Black release lever provides desired position within 12° to be locked (pull down to position, push up to lock). 9/43 CEOC1430 PRODUCT PRESENTATION Forward position allows extra clearance for opening and closing engine hood cover for daily pre-operational checks. Hydraulic Control Levers & Steering Wheel Steer effort is kept exceptionally low and can be demonstrated with a single index finger used to turn the steer tires while not in motion emphasizing the low‐effort design. Steering wheel is 30 cm in diameter • Operator has optimal control & maneuvering • An optional steering knob is also available • Hydraulic control levers are closely located to the right of the steering wheel • Hydraulic lever knobs are made of soft touch urethane for excellent grip • Levers are ergonomically designed in an arc to match the swing of operators right arm • Located strategically in the operators peripheral vision • Operator can visually spot the hydraulic function needed without moving their head from line of travel Parking Brake & Electronic Directional Control Electronic directional control allows operator to change directions while still controlling the steering wheel. - Keeping short shuttle applications productive - Optional foot direction control is available The parking brake is located on the left side of steering column. 10/43 CEOC1430 PRODUCT PRESENTATION Visibility All Around Visibility: Light emitting diode (LED) forward work lights with guards Narrow mast channel Open overhead guard (OHG) Anti-cinch seat belt Since visibility of the truck, forks, load and surroundings is important, the truck is equipped with the following attributes to promote better visibility for the operator: • Mast channels are narrower, providing better visibility of the load • Lift cylinders, chains and hoses are mounted at 45 degree angle • Two forward LED work lights offer superior visibility and illumination • LED are the longest lasting bulbs • Solid steel OHG bars provide an unobstructed view of the load • Anti-cinch seat belt permits the operator to turn easily when travelling in reverse LED lights LED Forward Work Lights LED stands for light emitting diodes. LED bulbs provide the latest light technology, producing a brighter light source than typical bulbs. There is no filament, which eliminates the typical weak point of ordinary lamp breakage. Made from rugged and durable aluminum die cast, this sealed lamp will provide years of trouble-free service for your lift truck. The LED flood lens produces a very uniform, vertically oriented pattern that 11/43 CEOC1430 PRODUCT PRESENTATION projects the light where lift truck users need it most. The light illuminates the forks of the truck as well as the racks where loads are placed; all while minimizing the glare off the mast, therefore minimizing eyestrain of the operator. The benefits are: • Brighter light • Increased visibility in dark areas • Extended bulb life equals less service or replacement needs • Durable housing to minimize damage • Covered under the Cat Lift Trucks Advantage Warranty program Customers save $$$ on bulb replacement & labor or service calls. Multifunctional display Display Panel Display Panel features Located in the optimum viewing angle on the tilt column, the new light emitting diodes (LED) provide key indicator lights and information to the driver. When drivers detect problems early, costly repairs can be minimized. 1. Transmission oil temperature warning 2. Air cleaner service warning indicator 3. Brake fluid level indicator 4. Engine oil pressure warning 5. Alternator (battery charging) status 6. Malfunction indicator 7. Engine coolant temperature gauge 8. Hour meter The benefits of the display panel are: • Quick reference points such as transmission oil temperature warning • Maintenance requirement indicator lights Safety features Transmission interlock Safety & Productivity Transmission Interlock benefits GC35K – GC70K comes with an automatic transmission lock feature which disengages the transmission every time when the operator leaves the truck. 12/43 CEOC1430 PRODUCT PRESENTATION The benefit of transmission interlock is that the truck doesn’t move in the absence of the operator ensuring added protection to the operator and to that of the people near the truck. Noise Reduction features benefits: Noise is recognized as a major contributor to operator fatigue, and consequently, lessens productivity. This is why engineers reduce noise levels wherever possible. Iso-engine mounts also transfer vibration to the solid steel frame, while engine hood insulation material reduces noise from engine to operator. Helical gears in the transmission reduce powertrain noise Wheel wells are closed to reduce engine noise and increase cooling efficiency Hydraulic control valve is rubber mounted to chassis reducing noise and promoting longer life. Hydraulic Accumulator in transmission control valve promotes smooth take-offs and directional changes. Changes up to 2.5 mph, reducing shocks in the powertrain Hydraulic pump enclosed to reduce noise Reduced noise and vibration helps reduce fatigue on the operator and thereby improves productivity. Reduced vibration also improves the life on the parts of the trucks reducing maintenance cost. Stable Frame & Body Made from solid steel plate Overhead guard Fully cast steer axle Low profile counterweight Heavy duty mast Robust Frame benefits Made in Houston, TX. The robust frame is engineered first on a computer using Finite Element Analysis (FEA), then tested in the real applications. The FEA models the truck frame and calculates with loads where stresses occur. Then the frame can be modified via a computer model to reduce or eliminate stress points. The frame is then built and further stress testing is done to insure the most robust frame. 13/43 CEOC1430 PRODUCT PRESENTATION The benefits are: • Durability - Strong frames provide more stability - Integrated tanks are structurally part of the frame • Rigidity - More steel - Low center of gravity for greater increased residual capacity - Solid one piece steer axle for less leak points • Paint with undercoating and multiple layers - Low solvent paints produce less waste and lower volatile compounds - Powder coat paint system Overhead Guard benefits • No longitudinal (left to right) bars • Better view of fork tips so less effort placing load at full height • High air intake • Cleaner air from higher levels brought to engine, decreasing dirt and particles entering the engine • Reducing repairs or maintenance caused by lower contaminated air entering the engine compartment Low Profile Counterweight benefits • Provides customers with maximum residual capacity • Smaller turning radius (see specifications) • Designed for maximum airflow to cooling system (critical for high shuttle and dusty/dirty applications) • Low profile provides greater visibility 14/43 CEOC1430 PRODUCT PRESENTATION Air Intake and Exhaust SystemModels Air intake Exhaust system Air Intake System Contaminated air will take away power and eventually ruin an engine. The air intake vent has an air cleaner installed with following benefits: • Attention was paid to deliver fresh, clean air to the engine with this system. Dirt particles kicked up from the floor by truck operation usually will not reach this height. • Air cleaner removes contaminants in a two stage process: - Vanes around the filter element create a cyclone effect causing large dust particles to drop to the bottom of the air cleaner canister - A dry paper element filters the remaining fine particles from the air • Filter element can easily be replaced without the use of tools Exhaust System • Located under the counterweight in the rear end of the truck away from the operator and mounted horizontally behind the radiator. It has two walls, using fiber-glass insulation to dampen exhaust noise. • A three-way catalyst is also included as a standard feature to meet EPA regulations. Engine Engines LPG Engine Engine protection system Pistons Crankshaft Overhead valves Engine lubrication system OHV industrial design Cooling system Ignition system purePOWER® Engines GM 4.3L V6 purePOWER® engines are designed to work in the most demanding conditions, employing reliable and proven technology. Skillful engineering has resulted in this advanced series of engines having all the characteristics critical for lift truck applications. • High performance • Low noise and vibrations • Excellent fuel economy • Low HC, NOx, and CO emissions that meet EPA and CARB regulations 15/43 CEOC1430 PRODUCT PRESENTATION Engine protection system Engine Protection System • Monitors engine oil pressure, coolant temperature, transmission temperature. • Lowers engine power when overheating at 104 degrees Celsius. It will shut-off at 110 degrees Celsius. • Slower travel speeds • Slower hydraulic speeds Lamps on instrument panel indicate low oil pressure or high transmission temperature, if the engine oil pressure drops significantly. The benefits are: • Minimizes costly repairs when failures occur • Operators can quickly inform maintenance crews of maintenance needs • Standard equipment for Cat Lift Trucks, while others (if offered) have it as an option. Pistons The pistons have two compression rings and one oil scraper ring for optimum efficiency. Crankshaft The crankshaft and other major internal moving components have been dynamically balanced to maximize the reduction of engine vibration. Overhead Valves The engine uses overhead valves. A rocker shaft located in the cylinder block controls the valves and push rods transfer the movement to the valves. This industrial design reduces premature wear in the valve train. Engine Lubrication System A filtered full-flow pressure feed system for optimum engine protection. Multiple oil ports provide ample flow of lubricant to the engine and its main working parts. 16/43 CEOC1430 PRODUCT PRESENTATION OHV Industrial Design Uses a electronic controlled throttle body to control the engine speed and is pre-set at the factory. This simple and proven design provides many benefits to the engine and customers, such as: • Prevents the hydraulic pump and fan drive from being over sped • In high traffic applications provides controlled speed • Safety incentives can benefit from lower traffic speeds • Can reduce insurance premiums for companies Cooling Cooling System The engine cooling system is a three-fluid system, with controlled circulation by means of a wax thermostat. A plate fin radiator is standard equipment on the GC35K – GC70K. A corrugated square fin radiator is available as option for larger cooling capacity. Ignition System The LPG engine uses a full solid-state type low-voltage ignition system. The benefits are: • Provides sufficient energy for ignition even with low battery voltage conditions • Ensures easy starting of the engine The PTO (or power take off) is driven by means of an external shaft. This is used to drive the hydraulic pump, effectively abolishing an external shaft. The engines use closed type crankcase ventilation in order to reduce exhaust emissions. Drive train Drive Train Powershift Transmissionodels The transmission utilizes many components to get the job done efficiently and smoothly. We have incorporated innovative and reliable designs to insure a smooth ride and durable lift truck. Clutch Packs Utilize two hydraulically actuated oil cooled clutch pack assemblies. One for forward direction and one for reverse direction. Clutch pack assemblies consist of 6 carbon fiber separator plates that transmit torque and motion from the input to the output shaft. 17/43 CEOC1430 PRODUCT PRESENTATION The benefits are: • Dissipate the frictional heat (created during normal operation) • Mounted to reduce power loss through the transmission • Increase power for better overall efficiency Helical gears Helical Gears • Offer reduced noise • Better for force distribution Control Valve Uses “drive-by-wire” technology and incorporates a solenoid valve or “electro-hydraulic shift” for directing oil flow to the clutch packs. Inching Valve The inching valve enables the operator to completely or partly disengage the transmission when driving. The precise control promotes effective maneuvering, thus increasing efficiency and reducing damages to the load and property. Drive Train Powershift Transmissionodels Oil Cooler The transmission oil cooler is located inside the radiator. The continuous circulation allows the heat from the clutch packs to be dissipated easily through the air of the radiator. An external radiator cooler can be added as a CSM option for harsher applications. Torque converter Torque Converter Located between the engine and transmission, it connects the engine flywheel to the transmission input shaft. The fluid connection provides two important benefits: • Transfers power from the engine to the transmission smoothly 18/43 CEOC1430 PRODUCT PRESENTATION • Multiplies the torque sent to the transmission, providing increased power on demand Drive Axle A one piece single cast housing: • Reduces potential leak points. • Absorbs the shock and stresses from the wheels. • Axle shafts transmit torque only to the drive wheels and not load stresses. Electrical system 12Volt Electrical System 12V Electric System These trucks use a 12V electrical system which is very advantageous for communality and lower cost of standard service parts. Starter Battery The starter battery is located on the right-hand side of the chassis. Relays and fuses are located on the engine inside the dash board. The benefits are: • The system uses standard fuses. • Grouped and conveniently located just in front of the battery. • Easy identification of corresponding relays and fuses are printed inside the top cover of each box. Ignition Switch The anti-restart feature reduces the risk of starter engagement, while the engine is running. Audible Alarms (standard) An audible alarm will sound when driving in reverse. 19/43 CEOC1430 PRODUCT PRESENTATION Brake system Brake System Two Pedal Brake System The two pedal brake system is located to the left of the accelerator and is used to apply the brakes without disengaging the transmission. The inching pedal on the left of the brake pedal simultaneously applies the brakes and disengages the clutch or “inches” by letting the clutch slip as the brakes are released. The benefits of this two-pedal brake system are: • Advantage for customers who must operate their lift truck on an incline • Drivers don’t worry about rolling backwards on graded surfaces • Precise maneuvers can be made in tight areas using the inching pedal • Inching pedal allows for slow, controlled acceleration Brake Assembly The brake assembly is a large 12.2 in. diameter for increased lining to drum contact area. The brake shoes are made of non-asbestos material with very good cold and warm frictional characteristics. This ensures consistent brake feel throughout the shift. When brakes are applied, a self-energizing mechanism transfers turning force from the leading shoe to the training shoe. This presses both shoes against the drum with greater strength and provides more braking force. The benefits are: • Self-energizing shoes reduce the amount of pedal force required to stop a truck • Reducing operator fatigue over the course of a shift • Non-boosted brake system means fewer components to service and repair Self-adjusting mechanism Cushion tires Self-Adjusting Mechanism Eliminates the need for frequent manual adjustment of the brakes, and keeps the brake shoes properly adjusted for even wear throughout their entire service life. When travelling in reverse, the selfadjusting mechanism is activated. As the clearance between the shoes and the drum increases, an adjustment screw is turned one notch by the lever of the adjuster to reposition the shoes closer to the drum. Tiresodels Black treaded cushion drive tires are standard on the complete range of IC cushion lift trucks. Cushion tires provide good traction and good operator comfort. They are recommended for standard applications with reasonable floor conditions where comfort is desired. Cushion tires do not puncture and require less maintenance than pneumatic tires; however, cushion tires offer less shock absorption and are not intended for potted floors or uneven outdoor surfaces. The benefits are: • Provides cushion on dry surfaces 20/43 CEOC1430 PRODUCT PRESENTATION • More stability due to overall lowered height of the chassis Tire options Non-Marking Tires Non-marking tires are offered in both lugged and smooth tread variations. Non-marking tires offer a solution to those customers concerned about leaving black skid marks on light floors. The non-marking tire options come complete with an anti-static strap, which is required due to the compound used in non-marking tires. Wide Stance Drive Wheels This option is available on the GC35K – GC70K models. The wider stance provides improved capacity retention for some mast-chassis combinations and provides increased lateral stability. Bolt-on fender extensions are included with this option. Full hydrostatic steering Steering SystemGC70K Models Hydrostatic Steering System In a fully hydrostatic system, steering is accomplished by hydraulic oil flow thus eliminating kickback from the steer wheels into the steering wheel. Hydraulic fluid is used to achieve steering so all mechanical linkage is eliminated. With precise steering control less steering wheel effort is required regardless of truck speed. This system has become the accepted “standard” design in the lift truck industry. The benefits are: • Low maintenance • Exceptional operator control and maneuverability • Few mechanical linkage points provide more precise steering control • Fewer lubrication points need services Steering wheel knobs are possible as an option. 21/43 CEOC1430 PRODUCT PRESENTATION Steering system Kingpin design Kingpin Design With hydrostatic steering come key features in the design of the steer axle components. One of these features is the kingpin layout. The kingpin is supported by needle bearings and a thrust bearing. The needle bearings are capable of handling radial forces. (Forces incurred when turning.) A thrust bearing withstands axial forces caused by the weight of the truck. This set up is very easy to maintain and does not require any special tooling to pre-load the bearings. The kingpins require greasing. This prevents premature wear by water and dust since this will be pushed out during maintenance. Steer Axle Made of a solid casting the solid steel axle support is one single unit, giving it superior strength and rigidity. This solid casting is a proven design for excellent durability to withstand stress exerted on the axle and chassis. This strength allows it to withstand even the most punishing ground conditions. Our casting contains homogeneous material and is therefore extremely suitable as a connection piece between the two knuckles and the steering cylinder. Also, with 3° of axle articulation, the operator is able to maneuver and control the lift truck on uneven surfaces. Cooling system Cooling System Radiator The cooling system is one of the most important and the most burdened systems on an internal combustion lift truck. It is usually foremost in the mind of customers as they proceed through the truck selection process and analyze which lift truck is best for their application. So it is essential to be familiar with the cooling system design, associated benefits and options available for demanding applications. 22/43 CEOC1430 PRODUCT PRESENTATION Plate fin radiator Plate-Fin Radiator The standard radiator on the GC35K-GC70K is a plate fin radiator. The radiator has a down flow, made of copper-brass. The openings are much wider and reduce the risk of clogging. The benefits are a more effective area available for cooling since the width of the radiator is less critical than the height. It reduces possible galvanic corrosion in the cooling system. Pusher fan Pusher Fan The GC35K-GC70K trucks use a pusher fan arrangement. The cooling fan is mounted on the water pump and driven by a pulley mounted on the crankshaft. This set-up requires less parts and maintenance. The air is drawn from under the truck and pushed through the radiator and counterweight. This airflow provides efficient cooling even in tough applications. Hydraulic System Hydraulic Pump The hydraulic system of the GC35K – GC70K series features an efficient, shaft driven pump, behind the engine compartment (with the longer lines). This eliminates the need for an auxiliary shaft and reduces clutter and maintenance. The pump is on the engine side so that both the suction and high-pressure lines are shorter. This increases the efficiency of the hydraulic system. The hydraulic pump is specifically designed to provide a low noise environment for the operator. Hydraulic Control Valve Designed for smooth lift control and precise attachment operation. Stackable Valve The control valve is stack-able and is easy to expand to 4 or 5 valves. A 3way configuration with lift, tilt, and auxiliary functions is standard. Notched Control Valve Deliver precise feathering control of the hydraulic flow, an essential feature for tight areas or handling delicate loads. 23/43 CEOC1430 PRODUCT PRESENTATION Hydraulic system Priority valve Priority Valve The priority valve provides priority oil flow to the steering pump. This ensures smooth, easy steering control during multiple hydraulic functions, such as lifting and steering. Lift and Tilt Function The lift and tilt functions on the standard control valve have a relief pressure set at (182.5 bar) 2650 psi. When an optional 4th valve is ordered the relief pressure for the 3rd and 4th functions will be reduced to 2250 psi. However, always verify with the attachment manufacturer the appropriate hydraulic pressure and flow requirements for proper operation. Note that auxiliary circuit relief pressures are not adjustable, but require replacement of the standard relief cartridge by one pre-set at the required relief pressure. Flow Regulator Valve The adjustable flow regulator valve is in-line between the lift control valve and the lift cylinders. It restricts the flow of oil returning from the lift cylinders, thereby limiting the lowering speed if desired. The lowering speed can be adjusted by an easily accessible screw on the valve. This feature allows your customer to tailor the lowering speed to each application. However, the flow regulator valve should never be adjusted to allow the forks to lower faster than the factory setting. Down Safety Valve The lift cylinders are equipped with a down safety valve. This valve allows controlled oil flow in case of hose rupture. The valve only controls the oil flow returning to the control valve. Oil filters Filtration Filter System A two-stage filter system in the tank uses a 150-micron suction strainer and a 15-micron return filter to provide full-time, full flow filtration. The return filter is equipped with a by-pass that opens in case the filter is clogged. This system protects the various precision components that make up the hydraulic system. Both the suction strainer and the return filter can be removed without draining the tank. Oil Filler Cap The oil level in the hydraulic tank is constantly changing with the movement (lift and tilt) of the mast and attachments. 24/43 CEOC1430 PRODUCT PRESENTATION Because of this, there is a constant airflow through the breather. There are several benefits for this system: • Removes the large dust particles and debris, protecting the hydraulic components from damage • Provides further protection from costly repairs Option: A dust-proof hydraulic tank breather is available as part of the foundry/brick protection package. Mast and Carriage Excellent Visibility and Rigidity The GC35K-GC70K masts incorporate modern engineering design and test practices to deliver a combination of combination of excellent visibility and rigidity. The smart mast design gives operators better visibility, raises productivity and reduces product damage. The narrow and deep mast channels features are: - Narrower flanges take up less space - Webs are deeper providing more strength - Larger rollers increase load-carrying capacity Strategic cylinder, hose and chain locations - Chains & hoses are at 45° to the channel - Smaller diameter lift cylinders increase view area Carriage design - Designed to increase visibility with fork bars are square instead of rectangular - More space in-between fork bars Lift Cylinders For reliability, each lift cylinder has an internal drain that permits a controlled amount of hydraulic oil to flow above the piston and thus prevents corrosion of the cylinder rod. An internal drain cylinder maintains a small diameter for good visibility and eliminates the chance of oil leaks associated with an external drain line. For further enhanced reliability, great care has been taken in the design of the mast and carriage to ensure proper alignment and distribution of operating forces. 25/43 CEOC1430 PRODUCT PRESENTATION • The tilt cylinder rod ends mount to the mast using spherical bushings thereby preventing misalignment of the tilt cylinders. • If a cylinder is not properly aligned it will eventually leak and possibly fail • Six load rollers support the forwards and backwards loading of the carriage • Specially shaped channels allow for two-point load roller contact even though the rollers are not canted. The two-point contact enables the rollers to handle side thrust forces between the mast channels. • Two side thrust rollers to help maintain its alignment in the mast Options: Mast-mounted lifting eyes and tilt cylinder boot kit are available as options. Mast interchangeability Interchangeability of Masts The masts of the GC35K-GC70K series are not fully interchangeable with the masts of the previous generation. Service Engineering is the best resource to determine the interchangeability of a particular mast with a particular chassis. Easy maintenance Easy Maintenance features Easy maintenance is facilitated with a removable floorplate that does not rquire tools to be removed. Fuse & relay holders are easily accessible under the engine cover. The operator seat is of the ‘Quick release forward’ type. The brake fluid reservoir is transparent for easy checking. Easy open engine cover With the quick release pin, move the seat forward to gain engine access Be sure to demonstrate that there is no need to swing the LPG tank to gain engine access. 26/43 CEOC1430 PRODUCT PRESENTATION This takes up less space in the maintenance area or aisles where operators are doing their daily checks. To ensure peak performance, maintenance on your lift truck is essential. Cat Lift Trucks are designed to be easily accessible. Service can be done quickly by either your dealer or your maintenance crew. Some benefits to keeping your truck up and running are: - Reduced risk of breakdown and subsequent problems - Fewer unforeseen expenses and inconvenience - Reduced cost of repairs over the lifetime of your lift truck Service Access and Diagnostics Daily Checks The engine cover opens wide and allows easy access to check fluid levels and to carry out visual inspections. Moving the Steering Column Forward Move the steering column forward by releasing the yellow lever on the left side of the steering column. Moving the Seat Move the seat to the forward-most position and fold the seat down by releasing the spring-loaded locking pin located near the left hip restraint. Raising the Engine Cover Raise the engine cover by pulling the latch located on the left side of the cover. A single gas assist spring permits the cover to be raised with minimal effort and keeps it in the fully open position. Brake Fluid and Engine Coolant Both the master brake cylinder and the coolant recovery reservoir are made of translucent molded plastic. Thus the brake fluid and engine coolant can be verified with a quick visual check. 27/43 CEOC1430 PRODUCT PRESENTATION Fuses Computer connection with cable for error code readout Access to Fuses Easily accessible, automotive style fuses are used. Inside the fuse holder a tool can be found to replace fuses. Inside the fuse cover, an explanation is available that describes the function of the fuses. Computer and Cable Error codes can easily be read and corrected by means of a laptop and connection cable. Besides communicating with the ECM, the computer can also check the input and output sensors, as well as the instrument panel. This feature reduces downtime and allows pinpointing of faults quickly. This will prevent repairing trucks on a trial and error basis and thus replacing parts that are not failing. Service Requirements 500 hours service interval The 500 hour service interval required reduces lifetime costs and also downtime related to service. Oil changes, lubrication, and adjustments are not required as often as some of the competitors. A number of other specific improvements reduce maintenance and lifetime costs: • LED lights result in reduced maintenance • Brake and inching pedal are easier to adjust • Cooling fan driven directly from water pump instead of using a shaft • Chassis is heavier and more durable • Higher grease capacity at grease points 28/43 CEOC1430 PRODUCT PRESENTATION Special Application versions Special applications Cat Lift Trucks offer GC40K – GC70 paper roll handling chassis and special option packages designed to meet the specific needs of the paper product industry. These specialized chassis and options optimize the truck systems to suit the unique requirements of the industry and are packaged to maximize value and reduce the need for field modifications. Paper Application Package • Hydraulic Accumulator • Cushions the load when traveling over bumps to reduce product damage • Single 1.4 liter diaphragm type accumulator (GC40K – GC45K) • Dual 1-liter diaphragm type accumulators connected in parallel (GC55K – GC70K) • Mounted under the frame for unmatched visibility • Hydraulic Flow Control Valve • Provides optimum hydraulic flow to the roll clamp and reduces the operating temperature of the hydraulic fluid. Adaptable to 10, 15 & 20gpm. Paper Roll Handling Chassis • Inline Row Plate Fin Radiator which is more resistant to clogging than the standard staggered row plate fin radiator • Tandem Transmission Oil Coolers that are mounted to louvered radiator cover to improve cooling, reduce vacuum effect and ease radiator cooling. • Louvered Radiator Covers • Carriage Slider Blocks that replace side thrust rollers with slider blocks to reduce carriage “racking” and high stress points on the mast. • Wrapped Exhaust Pipes reduces opportunity for scrap paper to ignite and catch fire • Belly Screen protects fan guard blades & bearings from debris guard, It also protects against debris on ground such as banding, plastic wrap and other such materials • Allows quick access for oil changes and regular maintenance 29/43 CEOC1430 PRODUCT PRESENTATION Standards compliance UL “LPS" Chassis Underwriter's Laboratories (UL) ratings indicate that specific design criteria have been met by the manufacturer. The National Fire Protection Association defines Type LPS as "trucks fueled with liquefied petroleum gas (LPS) provided with safeguards in addition to those required for Type LP." Underwriter's Laboratories tests products to internationally recognized safety standards to see if they are reasonably free from foreseeable risk of fire, electric shock or related hazards. The UL label appears on more than 6 billion new products each year. UL maintains the label's integrity by counterchecking manufacturers‘ facilities, production methods and products for continued compliance with safety requirements. Specification Changes The UL Safety-rated chassis includes a battery disconnect switch, an enclosed alternator and UL Type S labels. Each chassis is reviewed, approved and documented with UL for Type "S". Customer Application In those applications that require a UL Safety-rated chassis to satisfy the standards as set by the customer and/or the insurance underwriter. There is potential for a customer to reduce their insurance premium cost if their insurance underwriter recognizes the UL label. Notes Reference NFPA 505 for type of use definitions, but rely on your customer and/or their insurance underwriter for UL rating requirements. LPG-gas swing down bottle Swing Down LPG Tank Bracket This patented design is the only single motion, "swing-down" design on the market today.The bracket locks into place once it reaches the bottom of the arc to promote safe installation and removal of the LPG tank. The swing-down bracket ncreases the height of the LPG tank mounting, thereby reducing the rearward visibility slightly. This bracket significantly reduces the effort it 30/43 CEOC1430 PRODUCT PRESENTATION takes for an operator to change an LPG tank, especially frequent LPG tank changes or smaller persons making the changes will benefit. The swing down LPG bracket works with 33.5# and 43.5# LPG tanks. Load backrest extension Load Backrest Extension Provides a taller load backrest extension for taller loads and for use with the 48”, 54” and 60” wide carriage. Tilt cylincer boot kit Tilt Cylinder Boot Kit Tilt cylinder boots are available as an extra measure against contamination of the hydraulic system from dirt and other small particles. The "boots" cover the tilt cylinder rod when it is extended (tilting forward). The Tilt cylinder boot kit limits back tilt to 6 degrees maximum. Not for use on masts with back tilt great than 6°. The kit is highly recommended for dusty applications like foundries and brickyards. The benefits are cleaner hydraulic oil means the components within the system will last longer and operate more efficiently (pumps, valves, etc.). This, in turn, means less maintenance and better performance. Forks level option Forward Tilt Lockout (Forks Level) Forward tilt is restricted to mast vertical unless operator depresses override button mounted in tilt lever knob. Full forward tilt can be achieved with the button depressed. This option is recommended to reduce damage to clamp arm tip and paper roll. Customers are putting away loads in very high racks and/or with limited visibility. This option allows for confident load retrieval and put-away, where operator's visibility to the rack and load may be compromised. With this option load damage and rack damage can be reduced. Productivity can increase through more confident load handling. Contrl valves 4-Section Control Valve 4V Hydraulic Control, 4-Way Control Valve, 4-Section Hydraulic Valve This option includes hosing from all four sections to the bulkhead and four adjustable hydraulic control levers. Main relief pressure for lift and tilt is set at 2810 PSI. Auxiliary relief pressure for 3rd and 4th functions is set at 2250 PSI. Features four cowl-mounted hydraulic control levers (LIFT, TILT, AUX1, AUX2). A three-section hydraulic control valve is the standard offering on the GC35K-GC70K model lift trucks. In an application where four hydraulic functions are required (many attachments), an optional 4 section valve is available. Facilitates quick and easy hydraulic connection/disconnection between the mast and any dual function attachment. When ordering this option, take care to specify dual function internal hosing. 31/43 CEOC1430 PRODUCT PRESENTATION Steel supply lines and quick disconnect couplers are often used in conjunction with this option. 4-Section Control Valve, 5-Way with Auxiliary Port Plugged This option is also refered to with other terms: 4V Hydraulic Control, 4-Way Control Valve, 4-Section Hydraulic Valve, 5 Way with Auxiliary Port Plugged This option includes hosing from all four sections to the bulkhead and four adjustable hydraulic control levers. Main relief pressure for lift and tilt is set at 2810 PSI. Auxiliary relief pressure for 3rd and 4th functions is set at 2250 PSI. Solenoid is on 3rd lever. Features four cowl-mounted hydraulic control levers (LIFT, TILT, AUX1, AUX2). This cannot be used with a torque converter filter. A 3-section hydraulic control valve is the standard offering on the GC35KGC70K model lift trucks. In an application where four hydraulic functions are required (many attachments), an optional 4 section valve is available. This option facilitates quick and easy hydraulic connection/disconnection between the mast and any dual function attachment. Take care to specify dual function internal hosing when ordering this option. Steel supply lines and quick disconnect couplers are often used in conjunction with this option. Hydraulic Lift Line Accumulator Single 1.4 liter diaphragm-type accumulator on GC40K – GC45K. Dual 1 liter diaphragm-type accumulator on GC55K – GC70K. The hydraulic lift line accumulator can be used where fragile materials are handled (glass, lighting, etc.). The option provides improved shock dampening to load and front end components. Single Function High Flow Internal Hosing Single Function High Flow Hosing, Through-the-Mast Hosing, This option features one (1) pair of #8 hoses and fittings terminating at the back of the carriage bottom plate. This option is required to power any single function auxiliary attachment, including the factory integral sideshifter. Many customers see increased productivity through the use of a sideshifter or other single function auxiliary hydraulic attachment. It can be a good idea to order this option, regardless of whether there are immediate needs for auxiliary hydraulics. It can be costly and time consuming to install through the mast hosing, should the application change and auxiliary hydraulics become a requirement. 32/43 CEOC1430 PRODUCT PRESENTATION Hydraulic hose types Single Function Internal Hosing (GC55K –GC55KSTR) Single Function Hosing, Through-the-Mast Hosing, Over-the-Sheave Hosing This option features one (1) pair of #6 hoses and fittings terminating at the back of the carriage bottom plate.This option is required to power any single function auxiliary attachment, including the factory integral sideshifter. Many customers see increased productivity through the use of a sideshifter or other single function auxiliary hydraulic attachment. Dual Function Internal Hosing Dual Function Hosing, Through-the-Mast Hosing, Over-the-Sheave Hosing This option offers two (2) pair of #6 hoses and fittings terminating at the back of the carriage bottom plate. This option is required to power any afterfactory, dual function auxiliary attachment. Examplesinclude: sideshifting fork positioners, single-doubles or sideshifting clamps. Some applications benefit through the use of a dual function auxiliary hydraulic attachments. This option requires optional 4-section hydraulic control valve (includes a fourth hydraulic control lever). Dual Function Internal Hosing including 1 High Flow Function One (1) pair of #8 hoses and one (1) pair of #6 hoses terminating at the back of the carriage bottom plate. This option is required to power any afterfactory, dual function auxiliary attachment. Examples include: sideshifting fork positioners, single-doubles or sideshifting clamps.Some applications benefit through the use of a dual function auxiliary hydraulic attachments. It requires optional 4-section hydraulic control valve (includes a fourth hydraulic control lever). Dual Function Internal Hosing including 2 High Flow Functions Dual Function Hosing, Through-the-Mast Hosing, Over-the-Sheave Hosing Two (2) pair of #8 hoses terminating at the back of the carriage bottom plate. This option is required to power any after-factory, dual function auxiliary attachment. Examples include: sideshifting fork positioners, single-doubles or sideshifting clamps. Some applications benefit through the use of a dual function auxiliary hydraulic attachments.This option requires optional 4section hydraulic control valve (includes a fourth hydraulic control lever). 3 Function Internal Hosing including 1 High Flow Function Dual Function Hosing, Through-the-Mast Hosing, Over-the-Sheave Hosing 33/43 CEOC1430 PRODUCT PRESENTATION Two (2) pair of #6 hoses routed internally terminating at the back of the carriage bottom plate. One pair of #8 hoses routed externally through reel on right-hand side of mast and terminating on right hand-side of carriage top plate. This option requires a 4-section, 5-way valve. This option is required to power any after-factory, dual function auxiliary attachment. Examples include: sideshifting fork positioners, single-doubles or sideshifting clamps. Some applications benefit through the use of a dual function auxiliary hydraulic attachments. Single Function Steel Supply Lines 3-way Valve Dual Function Hosing, Through-the-Mast Hosing, Over-the-Sheave Hosing For use with single function, carriage mounted attachment. Terminates at the right hand-side of carriage top plate. This option is required to power any after-factory, dual function auxiliary attachment. Examples include: sideshifting fork positioners, single-doubles or sideshifting clamps. Some applications benefit through the use of a dual function auxiliary hydraulic attachments. Dual Function Steel Supply Lines with 1 (or No) High Flow Function 4way Valve Dual Function Hosing, Through-the-Mast Hosing, Over-the-Sheave Hosing For use with two function carriage mounted attachment 3rd function (high flow) terminates at function, attachment. the right hand-side of carriage top plate. 4th function terminates at left hand-side of carriage top plate. This option is required to power any after-factory, dual function auxiliary attachment. Examples include: sideshifting fork positioners, single-doubles or sideshifting clamps. An optional 4-section hydraulic control valve (includes a fourth hydraulic control lever) is required. It cannot be used together with a sideshifter. Dual Function Steel Supply Lines with 2 High Flow Function 4-way Valve Dual Function Hosing, Through-the-Mast Hosing, Over-the-Sheave Hosing For use with two function carriage mounted attachment 3rd function (high flow) terminates at function, attachment. the right hand-side of carriage top plate. 4th function terminates at left hand-side of carriage top plate. This option is required to power any after-factory, dual function auxiliary attachment. Examples include: sideshifting fork positioners, single-doubles or sideshifting clamps.This option requires optional 4-section hydraulic control valve (includes a fourth hydraulic control lever) and cannot be used with sideshifters. 34/43 CEOC1430 PRODUCT PRESENTATION Integral Sideshifter Sideshifter provides a sideways movement of the carriage to a maximum of 4 in. on each side of the centerline of the mast. The integral sideshifter provides improved capacity retention and better protection for the sideshifter components than a traditional hang-on type sideshifter. It also reduces the turning radius, improving maneuverability. The capacity is reduced due to the application of a sideshifter (versus forks only). The sideshifter enables the operator to better position a load for entry into or retrieval from storage locations without repositioning the truck. The sideshifter requires a 3-way hydraulic valve and single function hosing. The integral sideshifter is not designed for use with any rotating or revolving attachments. Unique steel supply lines are available for use with the factory installed integral sideshifter with single function 4-way valve steel supply lines. Not for use with steel supply lines. Installed option includes installation kit. If ordering “not installed”, must order installation kit and internal hosing. Foot Direction Control FDC Foot Direction Control Monitrol, Foot Directional Control Foot direction control changes the standard steer-column mounted directional control to the foot pedals. The foot direction control pedal replaces the accelerator pedal so that forward and reverse travel is controlled by the operators foot. Includes smart shift feature, which reduces the driveline components by eliminating high speed directional changes. The standard steercolumn mounted directional control lever is removed, and a foot directional control pedal replaces the accelerator pedal. This option is sometimes preferred in high cycle applications where productivity is key, but can also simply be a preference of the operator.Many operators find it easier and quicker to change directions using the foot direction control option. Foot Directional Control includes Smart Shift feature. Reverse drive package Reverse Drive Package Reverse Drive Package includes a swivel seat, reverse hand grip with horn button and an adjustable armrest. Made of comfortable plastic, the reverse grip provides quick and easy reach for operators who TC-TC-TC-travel in reverse frequently. 35/43 CEOC1430 PRODUCT PRESENTATION Swivel seat provides 12° of swivel on the either side with a latch at the end of travel. Torso clearance is not reduced. Provides 12°of swivel for added comfort and ease to the operator. Head clearance remains the same since it was designed with a low profile mounting. The easily accessible horn button allows operators to alert others while travelling in reverse. Operators also have a comfortable handle to grab. Smart Shift option Smart Shift The Smart Shift option is also refered to as Shift Inhibitor. Smart Shift reduces damage to the driveline components by eliminating high speed directional changes. When attempted, the engine drops to idle rpm’s and the transmission will not shift direction until speed is reduced and the operator cycles the accelerator pedal. Smart Shift reduces damage to the driveline components by eliminating high speed directional changes. Dust protection package Dust and Foundry Protection Package Specifically designed for extremely dusty and dirty environments, this package includes high mounted pre-cleaner, magnetic drain plugs, a dust proof hydraulic pump seal, a dust-proof front axle breather and a brake booster filter. The oil level in the hydraulic tank is constantly changing with movement (lift and tilt) of the mast and attachments. Because of this, there is a constant airflow through the hydraulic breather. The front axle has an open connection with the ambient air. As front axle oil heats up and cools down, air has to be able to flow in and out of the axle housing. In dusty conditions, dust particles may enter the axle oil causing premature wear of components. The dust-proof axle breather is offered to prevent this from happening. The dual element air filter is a small filter that is fitted in the existing air filter. As a result the cleaner consists of two filters working in series. The air intake pre-cleaner consists of a dry cyclone cleaner that separates dust particles from the intake air. The pre-cleaner is fitted to the air intake of the overhead guard. The dust particles will be separated from the air by inertia of the large dust particles. Dust will be caught in the air bowl. The pre-cleaner is selfcleaning since dust particles will drop through the opening at the underside of the cleaner. Note that the optional pre-cleaner is fitted to the rear leg of the overhead guard and will slightly reduce rearward visibility. Dusty applications like foundries and brickyards where the air cleaner can become clogged frequently. Hot applications where the coolant level needs to be monitored closely. Any application where daily checks or maintenance is suspect and needed.. This option will reduce daily maintenance requirements for cleaning the air filter when working in dusty applications like foundries and brickyards. This package is not compatible with elevated exhaust. 36/43 CEOC1430 PRODUCT PRESENTATION Torque converter line filter Torque Converter Line Filter The torque converter is located between the engine and the transmission and connects the engine flywheel to the transmission input shaft. This connection is actually a fluid connection. There is an optional filter that can be added to the torque converter line that filters the oil used in the torque converter. Applications with excessive dust, dirt and/or debris in the air (i.e., lint, paper fiber, cotton, drypowders, etc.). Cleaner oil means the components within the system will last longer and operate more efficiently. This, in turn, means less maintenance and better performance.Not for use with 5-way auxiliary hydraulics Cooling package High Pass Through Cooling Package Open core plate fin radiator provides more resistant to clogging than the standard staggered row plate fin radiator. Mounted on the louvered radiator cover, the repositioned transmission oil cooler reduce vacuum effect and eases the radiator cleaning. Paper, chemical and other industries where the application requires better heat transfer. Improved heat exchange without increasing the possibility of clogging. Carriage slider blocks Carriage Slider Blocks Carriage slide blocks replaces the side thrust rollers with slider blocks side-blocks. Carriage slide blocks are ecommended for use with large multifunction hydraulic attachments.Using slide blocks reduces carriage “racking” and high stress points on the mast. Included in the paper roll handling models. Applies only to the standard carriage. 37/43 CEOC1430 PRODUCT PRESENTATION Low profile package Low Profile Package Low Profile Package includes vinyl static and 4” lower than the standard overhead guard aimed at reducing the guard height from floor to 83”. The full suspension vinyl seat is replaced by the static seat thus bringing the seat height lower which is essential when the lower overhead guard. The package reduces the guard height by about 3.5” Not for use with Reverse Drive Package or full-suspension seat. Reduces torso clearance by 3.5” Non-Marking Tires Non marking tires are offered in both lugged and smooth tread variations. Non-marking tires offer a solution to those customers concerned about leaving black skid marks on light floors. The nonmarking tire options come complete with an anti-static strap, which is required due to the compound used in non-marking tires. Dual drive (wide stance) Wide Stance Drive Wheels Wide stance drive wheels offers stability by widening the load distribution points (tires) when carrying heavier loads as heavy as this truck can carry at the mast height that this truck offers. When changing the truck specification from standard tread to wide stance drive wheels, the stability triangle is widened offering more stability to the truck. Wide stance drive wheels option includes fender extension with hardware and drive rims for field conversion when ordering non-installed option. Tires are not included when ordering non-installed wide stance drive wheels. Strobe light Amber Strobe Light - High Clearance Presence Warning An amber strobe light is mounted above the overhead guard andflashes whenever the key switch is turned on. The strobe light utilizes a flash tube for high-speed illumination and may increase awareness in certain applications or from a greater distance. The strobe is mounted in a highlyvisible location on top of the overhead guard. Truck height above the overhead guard increases by approximately 6 inch. Applications with low lighting, high ambient noise levels, pedestrian and/or vehicle traffic. Warns others of the presence of the truck and augments back-up alarm where ambient noise is high. Light may distract operator when looking up through the overhead guard. Warning light mounting plate may reduce visibility through overhead guard. 38/43 CEOC1430 PRODUCT PRESENTATION Seat belt safety features Seat Belt Ignition Interlock Engine will not run unless operator is in seat with seat belt fastened. Includes hour meter cutoff and park brake override that allows engine to run with operator off truck. Augments normal presence detection system (PDS) functionality as above.The seat belt interlock forces the seat belt to be used when operating properly.Less expensive seat belt monitoring is available with the orange seat belt option. Full Suspension Seat Cloth A cloth full-suspension seat replaces the standard vinyl full-suspension seat. The cloth seat is offered for those operators who prefer cloth over the standard vinyl full-suspension. The seat is beneficial for applications that experience frequent cracking of vinyl seats or other damage may benefit from less frequent replacement of the cloth seat. Orange Seat Belt The standard black seat belt is replaced with an orange seat belt. Applications where seat belt use is suspect and needs to be monitored easily. The orange seat belt provides an easy way for supervisors to visually confirm the seat belt is being used. For more comprehensive seat belt use monitoring, consider the seat belt ignition interlock option. OPTIONS GC35K – GC70K Models Adjustable Armrest Adjustable armrest mounts to the right side of the seat, conveniently adjusts in many directions and folds out of the way for easy entry/exit on the right side. Improved operator comfort, reduced operator fatigue as a low cost alternative to fingertip hydraulic controls. Improved ergonomics while maintaining mechanical linkage to the hydraulic control valve and without adding expensive electronics. Fire Extinguisher An ABC-type 2 ½ lb fire extinguisher is available for customers who require a lift truck-mounted fire extinguisher. The fire extinguisher is mounted on the right side of the truck. Some insurance underwriters may require this option. Not compatible with adjustable armrest. Some countries or customers may require different size extinguishers or labels. Language markings French Portuguese Spanish Language Marking Options Language markings are available in French, Portuguese and Spanish language. 39/43 CEOC1430 NOTES 40/43 CEOC1430 Appendix 1 Vibrations Sales data The table shown below illustrates the results of these efforts as measured in ‘mils’ (peak-to-peak). Note: 1 mil = .001 inch Vibration levels Component Pedals Steering Wheel: Control Levers: Seat Mounts: Inching brake: Brake: Accelerator: Lift Tilt: 1st Auxiliary: Left Side: Right Side: Low-Idle .25 .20 .15 .15 .15 .15 .15 .30 .32 High-Idle 34 .42 .20 1.20 .20 .20 .22 .60 .30 Observed Vibration Levels 41/43 CEOC1430 Appendix 1 Emission levels License Engine Fuel Disp. CC Maximum Power (kW) Cert. level (g/kWh) Standard (g/kWh) HC+NOx CO HC+NOx CO 2007 U-L-0060027 7Z9XB04.3GPB LPG 4300 – GM4.3 71 2.1 1.3 2.7 4.4 2008 U-L-0060033 8Z9XB04.3GPB LPG 4300 – GM4.3 71 2.1 1.3 2.7 4.4 Noise level at operator’ ear: N Noise levels at surrounding of the truck (Lpaz): Fuel consumption GC55K, 2007 Fuel System, Jan 2006: 30 meter pattern – 20.96 pounds per hour @ 56 cycles per hour GC55K, 2004 Fuel System, Aug 2003: 30 meter pattern – 19.56 pounds per hour @ 56 cycles per hour 50 meter pattern – 20.14 pounds per hour @ 48 cycles per hour 150 meter pattern – 17.88 pounds per hour @ 24 cycles per hour GC55K, Prototype Fuel System, Oct 2002: 30 meter pattern – 18.07 pounds per hour @ 48 cycles per hour 50 meter pattern – 17.53 pounds per hour @ 39 cycles per hour 150 meter pattern – 18.59 pounds per hour @ 23 cycles per hour GC70K 7.51 kg/hr – VDI pattern test in 7/2007 42/43 CEOC1430 Appendix 2 Specification sheets 43/43 CEOC1430 LP Gas Cushion Tire Lift Trucks Capacity: 7,000-15,500 lb Commanding Presence GC35K-GC70K (STR) Series The GC35K-GC70K Series internal combustion cushion tire lift trucks provide maximum performance in a variety of applications due to increased efficiency and operator-friendly controls. In control and delivering results. Your Cat® lift truck will help keep the operator comfortable and productive. Uncompromising Performance. This lift truck thrives in applications where its strength can effectively be put to the test. The spacious operator compartment combined with powerful performance results in an operator who is comfortable and productive during long shifts. Air Quality. These rugged trucks provide excellent horsepower and torque while meeting EPA and CARB requirements for carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxide (NOx) emissions. Designed For Uptime. The standard premium LED/LCD display is designed for easy monitoring of truck functions. Extended service intervals, the advanced Engine Protection System and easy access to service components results in increased uptime for your applications. 15,000 14,000 13,000 12,000 11,000 10,000 9,000 8,000 Model 7,000 Capacity (lbs) Optimized Visibility Narrow mast channels and open overhead guards help improve operator visibility to the load and surroundings. Standard LED work lights illuminate the work area while providing significant maintenance savings over traditional halogen or incandescent lights. GC35K GC40K GC40K STR GC45K SWB GC45K STR GC55K GC55K STR GC60K GC70K GC70K STR 2 4 Increased visibility Quality Comfortable Seating Operators of varying sizes can work long shifts comfortably in the standard fullsuspension seat. An optional reverse drive package with swivel seat and rear grab handle with horn button is available for high-shuttle applications. Premium Display Panel The standard premium display provides a number of productivity-enhancing tools to the operator. Features such as malfunction indicators and an engine coolant temperature gauge help ensure that the truck is running at peak performance. Adjustable seating for increased comfort Optimized display panel raises awareness 3 RELIABILITY Step Up In Power These trucks aren’t built to sit on the sidelines. The GC35K-GC70K (STR) Series delivers top performance throughout the shift. Options For Applications Options such as the dust and foundry package, enclosed alternators, torque converter filter and specialty tires can customize the truck for your specific needs, while extending equipment service life and minimizing product damage. Solutions for your application 4 6 Environmentally-Friendly Engines The 4.3L V6 engine works in the toughest conditions, while offering excellent fuel economy and low noise and vibration levels. Increased Equipment Protection The Engine Protection System (EPS) monitors the engine oil pressure, transmission temperature and coolant temperature. The lift truck will slow down or shut off if this system recognizes unsafe conditions. Increased fuel efficiency, low emissions Protecting your investment Serviceability With 500 hour service intervals, displaybased indicators and reminders and easy access to service components, you can count on maximizing uptime and lowering maintenance costs with your Cat lift truck. Service time is minimized 5 CUSTOMER SERVICE 6 Best Warranty In The Industry We stand behind our products, giving you peace of mind by helping your trucks stay on the job, day after day. Every new Cat lift truck is covered by a 2-year/unlimited hours warranty that includes parts and labor regardless of service hours. All components and systems are covered. With our standard 3-year/6,000 hours extended powertrain warranty, you’ll have the confidence that only comes from owning a Cat lift truck. Free Loaner Service Guarantee* If your lift truck is not repaired right the first time or within the quoted time, you will receive a free loaner truck while the repair is completed. Parts Fast Or Parts Free* The Parts Fast Or Parts Free Guarantee ensures next-business-day delivery of parts for all brands of lift trucks, or they’re free, including freight. If your part doesn’t come in by the next business day, we pay for it. Guaranteed to keep you moving Parts for all brands of lift trucks Flexible Financing Options* Financing your next Cat lift truck is easy with our wide range of flexible leasing and purchasing options. Whether you want to finance or lease, your local Cat lift truck dealer can help customize a package tailored to your specific needs. Dealers You Can Depend On With hundreds of dealer locations throughout North and South America, Cat lift truck dealers provide more than lift trucks. From flexible financing options, parts, service and product support, our dealers are unsurpassed. Free Planned Maintenance* Proper maintenance of your truck helps assure top performance over the long haul. That’s why every new Cat lift truck gets its first planned maintenance completed by your local Cat lift truck dealer at no cost to you. Custom financing packages Professionals you can depend on Quality service at the right price * Programs may be subject to change without notice and may vary by region. Please ask your local Cat® lift truck dealer for complete terms and conditions. 7 Specifications Characteristics 1 2 Capacity GC35K GC40K GC40K STR GC45K SWB at rated load center lb kg 7,000 3,500 8,000 4,000 8,000 4,000 10,000 at load center - distance in mm 24 500 24 500 24 500 24 4,500 600 3 Power LP gas LP gas LP gas LP gas LP gas 4 Tire type cushion, pneumatic cushion cushion cushion cushion 5 Wheels (x=driven) number front / rear 2x / 2 2x / 2 2x / 2 2x / 2 GC35K GC40K GC40K STR GC45K SWB Dimensions 6 Lift maximum fork height w / rated load in mm 183.1 4,650 183.1 4,650 198.8 5,050 198.8 5,050 7 Lift w / standard two-stage mast maximum fork height (top of forks) in mm 120.1 3,050 120.1 3,050 120.1 3,050 114.2 2,900 free fork height in mm 5.9 150 5.9 150 5.9 150 6.3 160 8 9 Forks thickness x length x width Fork spacing out-to-out minimum / maximum 10 Tilt forward / backward 11 length to fork face 12 13 14 width Overall dimensions height 15 16 in 2.0 x 48.0 x 6.0 mm in 50 x 1,220 x 150 mm 13.5 / 41.0 degrees 342 / 1,042 2.0 x 48.0 x 6.0 50 x 1,220 x 150 13.5 / 41.0 5 / 10 342 / 1,042 2.0 x 48.0 x 6.0 50 x 1,220 x 150 13.5 / 41.0 5 / 10 342 / 1,042 2.0 x 48.0 x 6.0 50 x 1,220 x 150 13.5 / 41.0 5 / 10 342 / 1,042 5 / 10 in mm 98.8 2,510 100.4 2,550 94.9 2,411 103.1 with standard tires in mm 46.5 1,180 46.5 1,180 46.5 1,180 46.5 2,620 1,180 w / stnd tires, wide-stance in mm 50.0 1,270 50.0 1,270 50.0 1,270 50.0 1,270 with lowered mast in mm 83.5 2,120 83.5 2,120 83.5 2,120 83.5 2,120 seat height in mm 47.2 1,200 47.2 1,200 47.2 1,200 47.2 1,200 2,205 top of overhead guard in mm 86.8 2,205 86.8 2,205 86.8 2,205 86.8 with extended mast in mm 168.1 4,270 168.1 4,270 168.1 4,270 162.2 4,120 in mm 88.0 2,235 90.0 2,285 82.3 2,091 92.1 2,340 17 Minimum outside turning radius 18 Load moment constant in mm 17.7 450 17.7 450 17.7 450 18.3 465 19 Minimum aisle – 90° stack – zero clearance w/o load in mm 105.9 2,690 107.9 2,740 100 2,540 110.6 2,810 Performance GC35K GC40K GC40K STR GC45K SWB 20 travel speed loaded / empty mph km/h 11.8 / 12.1 19.0 / 19.5 11.8 / 12.1 19.0 / 19.5 11.8 / 12.1 19.0 / 19.5 11.5 / 12.1 18.5 / 19.5 21 Speeds lift speed loaded / empty fpm m/s 106 / 112 0.54 / 0.57 106 / 112 0.54 / 0.57 106 / 112 0.54 / 0.57 77 / 83 0.39 / 0.42 22 lowering speed loaded / empty 23 Drawbar pull 24 Gradeability fpm m/s 108 / 98 0.55 / 0.50 108 / 98 0.55 / 0.50 108 / 98 0.55 / 0.50 87 / 81 0.44 / 0.41 loaded at 1 mph (1.6 kph) lb N 6,283 2,850 6,283 2,850 6,283 2,850 6,173 2,800 loaded maximum lb N 7,110 3,225 7,110 3,225 7,110 3,225 7,000 loaded at 1 mph (1.6 kph) % % maximum loaded / empty 33.0 42.0 / 24.0 37.0 / 21.0 36.0 / 21.5 30.0 / 17.5 GC35K GC40K GC40K STR GC45K SWB Weight 25 Empty 26 Axle load lb kg with rated load front / rear lb kg 16,329 / 2,207 7,706 / 1,028 18,152 / 2,118 without load front / rear lb kg 4,618 / 6,918 11,550 Chassis front, standard 27 Tire size 28 in in in front, standard wide-stance rear 29 Wheel base 3,175 37.0 5,240 2,095 / 3,139 12,280 32.0 5,570 4,768 / 7,502 8,576 / 991 2,163 / 3,404 12,470 27.0 5,655 14,265 6,470 18,211 / 2,257 8,603 / 1,054 21,125 / 3,116 9,493 / 1,468 4,827 / 7,641 2,190 / 3,467 4,299 / 9,941 1,951 / 4,510 GC35K GC40K GC40K STR 22x9x16 22x9x16 22x9x16 22x9x16 22x9x16 22x9x16 22x9x16 22x9x16 18x7x12.1 18x7x12.1 GC45K SWB 18x7x12.1 18x7x12.1 in mm 62.0 1,575 62.0 1,575 62.0 1,575 62.0 front, standard tires in mm 37.0 940 37.0 940 37.0 940 37.0 940 front, wide-stance tires in mm 40.9 1,040 40.9 1,040 40.9 1,040 40.9 1,040 31 rear standard tires in mm 38.6 980 38.6 980 38.6 980 38.6 980 32 Ground 33 clearance at lowest point of mast* in mm 3.1 80 3.1 80 3.1 80 3.1 80 at center of wheel base in mm 5.9 150 5.9 150 5.9 150 5.9 150 30 34 35 Tread width Brakes service type foot, hydraulic foot, hydraulic foot, hydraulic foot, hydraulic parking type hand, mechanical hand, mechanical hand, mechanical hand, mechanical GC35K GC40K GC40K STR GC45K SWB GM V6 GM V6 GM V6 Powertrain 36 manufacturer and model 37 continuous output (S.A.E. gross) Engine 38 maximum torque (S.A.E. gross) 39 cylinder / displacement 40 type 41 Transmission HP kW 92.5 69.0 at rpm lb-ft Nm/rpm L for attachments at aux. valve 43 Noise level mean value at operator’s ear 69.0 31.0 6.0 / 262 31.0 4,300 6.0 / 262 dB(A) *This varies depending upon the model selection and the tire type. 2,250 83.5 31.0 4,300 6.0 / 262 2,250 31.0 4,300 6.0 / 262 2,250 1/1 155 83.5 4,300 powershift 1/1 155 83.5 220 1,200 powershift 1/1 155 69.0 1,200 powershift 1/1 bar 92.5 2,450 220 1,200 powershift psi 69.0 2,450 220 1,200 GM V6 92.5 2,450 220 at rpm cu in 92.5 2,450 number of speeds forward / reverse 42 Relief pressure 8 1,575 2,250 155 83.5 GC45K STR GC55K GC55K STR GC60K GC70K GC70K STR 10,000 4,500 12,000 5,500 12,000 5,500 13,500 6,000 15,500 7,000 15,500 24 600 24 600 24 600 24 600 24 600 24 7,000 600 LP gas LP gas LP gas LP gas LP gas LP gas cushion cushion cushion cushion cushion cushion 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 GC45K STR GC55K GC55K STR GC60K GC70K GC70K STR 198.8 5,050 208.7 5,300 179.5 4,560 198.8 5,050 198.8 5,050 198.8 5,050 114.2 2,900 114.2 2,900 114.2 2,900 92.9 2,360 92.9 2,360 92.9 2,360 6.3 160 6.3 160 6.3 160 6.5 165 6.5 165 6.5 165 2.0 x 48.0 x 6.0 50 x 1,220 x 150 13.5 / 41.0 342 / 1,042 2.4 x 48.0 x 6.0 60 x 1,220 x 150 13.5 / 41.0 5 / 10 342 / 1,042 2.4 x 48.0 x 6.0 60 x 1,220 x 150 13.5 / 41.0 5 / 10 342 / 1,042 2.6 x 48.0 x 6.0 65 x 1,220 x 150 16.3 / 47.8 5 / 10 414 / 1,214 2.6 x 48.0 x 6.0 65 x 1,220 x 150 16.3 / 47.8 6/9 414 / 1,214 2.6 x 48.0 x 6.0 65 x 1,220 x 150 16.3 / 47.8 6/9 414 / 1,214 6/9 98.3 2,496 114.6 2,910 104.5 2,655 116.1 2,950 116.1 2,950 107.5 2,730 46.5 1,180 52.0 1,320 52.0 1,320 56.7 1,440 56.7 1,440 56.7 1,440 50.0 1,270 55.9 1,420 55.9 1,420 – – – – – – 83.5 2,120 83.5 2,120 83.5 2,120 84.6 2,150 84.6 2,150 84.6 2,150 1,285 47.2 1,200 47.2 1,200 47.2 1,200 50.6 1,285 50.6 1,285 50.6 86.8 2,205 86.8 2,205 86.8 2,205 88.8 2,255 88.8 2,255 88.8 2,255 162.2 4,120 162.2 4,120 162.2 4,120 140.9 3,580 140.9 3,580 140.9 3,580 88.0 2,234 100.4 2,550 92.5 2,350 101.2 2,570 101.2 2,570 97.2 2,470 18.3 465 18.9 480 18.9 480 20.9 530 20.9 530 20.9 530 106.3 2,700 119.3 3,030 111.4 2,830 122 3,100 122 3,100 118.1 3,000 GC45K STR GC55K GC55K STR GC60K GC70K GC70K STR 11.5 / 12.1 18.5 / 19.5 11.2 / 12.1 18.0 / 19.5 11.2 / 12.1 18.0 / 19.5 13.0 / 14.3 21.0 / 23.0 12.7 / 14.3 20.5 / 23.0 12.7 / 14.0 20.5 / 22.5 77 / 83 0.39 / 0.42 77 / 83 0.39 / 0.42 77 / 83 0.39 / 0.42 71 / 77 0.36 / 0.39 71 / 77 0.36 / 0.39 71 / 77 0.36 / 0.39 87 / 81 0.44 / 0.41 87 / 81 0.44 / 0.41 87 / 81 0.44 / 0.41 106 / 77 0.54 / 0.39 106 / 77 0.54 / 0.39 106 / 77 0.54 / 0.39 6,173 2,800 6,118 2,775 6,118 2,775 7,826 3,550 7,716 3,500 7,716 3,500 7,000 3,175 6,889 3,125 6,889 3,125 9,425 4,275 9,370 4,250 9,370 27.0 22.5 30.0 / 17.5 GC45K STR 4,250 22.0 24.5 21.5 26.0 / 20.0 25.0 / 21.0 30.0 / 22.0 27.0 / 20.5 26.0 / 21.0 GC55K GC55K STR GC60K GC70K GC70K STR 15,850 7,190 14,350 6,510 21,471 / 2,927 9,651 / 1,382 24,683 / 3,162 11,257 / 1,432 25,299 / 3,325 11,537 / 1,506 28,996 / 3,798 12,920 / 1,834 32,118 / 4,256 14,481 / 1,990 32,756 / 4,420 14,771 / 2,064 4,646 / 9,753 2,108 / 4,425 5,334 / 10,510 2,420 / 4,769 16,645 7,550 5,951 / 10,674 2,700 / 4,843 19,310 8,760 20.5 7,086 / 12,207 3,215 / 5,539 20,900 9,480 6,963 / 13,911 3,159 / 6,312 21,870 9,920 7,601 / 14,076 3,449 / 6,386 GC45K STR GC55K GC55K STR GC60K GC70K GC70K STR 22x9x16 22x12x16 22x12x16 28x12x22 28x12x22 28x12x22 22x9x16 22x12x16 22x12x16 – - – 18x7x12.1 18x8x12.1 18x8x12.1 22x8x16 22x8x16 22x8x16 62.0 1,575 70.1 1,780 70.1 1,780 72.0 1,830 72.0 1,830 72.0 1,830 37.0 940 40.0 1,015 40.0 1,015 44.5 1,130 44.5 1,130 44.5 1,130 40.9 1,040 44.1 1,120 44.1 1,120 – – – – – – 38.6 980 38.0 965 38.0 965 45.7 1,160 45.7 1,160 45.7 1,160 3.1 80 3.1 80 3.1 80 3.1 80 3.1 80 3.1 80 5.9 150 5.9 150 5.9 150 7.9 200 7.9 200 7.9 200 foot, hydraulic foot, hydraulic foot, hydraulic foot, hydraulic foot, hydraulic foot, hydraulic hand, mechanical hand, mechanical hand, mechanical hand, mechanical hand, mechanical hand, mechanical GC45K STR GC55K GC55K STR GC60K GC70K GC70K STR GM V6 GM V6 GM V6 GM V6 GM V6 92.5 69.0 92.5 69.0 2,450 220 31.0 220 4,300 31.0 6.0 / 262 83.5 31.0 4,300 6.0 / 262 2,250 83.5 4,300 31.0 6.0 / 262 2,250 83.5 4,300 2,250 31.0 220 31.0 6.0 / 262 1,200 4,300 6.0 / 262 powershift 2,250 2/2 155 83.5 4,300 powershift 2/2 155 83.5 69.0 1,200 2/2 155 92.5 2,450 220 powershift 1/1 155 69.0 1,200 powershift GM V6 92.5 2,450 220 1,200 1/1 155 69.0 2,450 220 powershift 1/1 92.5 2,450 1,200 powershift 2,250 69.0 2,450 1,200 6.0 / 262 92.5 2,250 155 83.5 NOTE: These specifications assume the use of drive axles, tires and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (“MCFA”). (See ANSI/ITSDF B56.1) Also be advised that overall operating visibility may be affected by the mast configuration and mast options of your truck. Therefore, you may need to add ancillary [auxiliary] devices or modify your operating practices. Consult your dealer for further information. 9 Call-out numbers shown in diagram correspond to the first column of the specifications chart. 10 16 6º 6º 7 15 13 2 14 8 33 9 32 18 29 11 18 9 30 12 9 17 9 19 Safety Standards These trucks meet American National Standards Institute/ Industrial Truck Standards Development Foundation, ANSI/ITSDF B56.1. UL-Classified by Underwriters Laboratories, Inc., as to fire and electric shock hazard only. Types LP, LPS (optional), Industrial Trucks.Users should be aware of, and adhere to, applicable codes and regulations regarding operator training, use, operation and maintenance of powered industrial trucks, including: • ANSI/ITSDF B56.1. • NFPA 505, fire safety standard for powered industrial trucks - type designations, areas of use, maintenance, and operation. • Occupational Safety and Health Administration (OSHA) regulations that may apply. Specifications, equipment, technical data, photos and illustrations based on information at time of printing and subject to change without notice. Some products may be shown with optional equipment. 10 Cat lift trucks come equipped with features and options that allow you to get the job done. The specialized GC40K-PRH-STR – GC70K-PRH-STR models are equipped with paper handling chassis and special option packages designed specifically for the paper product industry. Packaged together, these specialized chassis and options provide value, helping reduce the need for field modifications. Paper Application Package (standard equipment) includes: • Hydraulic accumulator • Hydraulic flow control valve • Inline row plate fin radiator • Tandem transmission oil coolers • Louvered radiator covers • Carriage slider blocks • Wrapped exhaust pipes • Belly screen Product Protection Package (optional) includes: GC40K-PRH-STR 15,000 14,000 13,000 12,000 11,000 10,000 9,000 Model 8,000 Capacity (lbs) 7,000 Additional Options Enhance Your Experience • 4-position electronic pressure regulator • Forward tilt lockout for mast GC45K-PRH-STR • Drop stop valve in lift circuit GC55K-PRH-STR • Flexible fenders GC70K-PRH GC70K-PRH-STR 11 Quality Reliability Customer Service Experienced professionals at our dealerships and on our National Accounts Team can assist you with your lift truck purchase or lease. Your Cat lift truck dealer can provide options and additional visual and audible warning devices geared toward your specific requirements. Operator training programs are also available to boost productivity and to help reduce the potential for product damage and personal injury. LP Gas Cushion Tire Lift Trucks Capacity: 7,000-15,500 lb 1-800-CAT-LIFT | www.cat-lift.com Copyright © 2010 by MCFA. All rights reserved. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. All registered trademarks are the property of their respective owners. Some products may be shown with optional equipment. Printed in U.S.A. CECT0010 06/10 GC35K – GC70K Models Mast and Capacity Information TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 82 MAST AND CAPACITY INFORMATION GC30K – GC70K Models Model GC35K Mast Tyype Standard Tread Maximum Fork Height Overall Lowered (MFH) (OAL) SIMPLEX Freelift Tilt Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard @24 in @ 500 @24 in @ 500 Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center w/ Load Backrest w/o Load Backrest w/ Load Backrest w/o Load Backrest F/B in in in mm in mm deg lb kg lb kg 120 3050 83.5 2120 167.3 4250 150.4 3820 5.9 150 5.9 150 5/10 7000 3500 7000 3500 11550 5240 132 3350 89.4 2270 179.1 4550 162.2 4120 5.9 150 5.9 150 5/10 7000 3500 7000 3500 11640 5280 148 3750 97.2 97 2 2470 194.9 194 9 4950 178 4520 5.9 59 150 59 5.9 150 5/10 7000 3500 7000 3500 11710 5310 159 4050 104.3 2650 206.7 5250 189.8 4820 5.9 150 5.9 150 5/10 7000 3500 7000 3450 11790 5350 179 4550 116.1 2950 226.4 5750 209.4 5320 5.9 150 5.9 150 5/6 7000 3500 6800 3350 11990 5440 199 5050 126 3200 246.1 6250 229.1 5820 5.9 150 5.9 150 5/6 7000 3500 6600 3200 12080 5480 in DUPLEX Overall Extended Height mm in mm mm mm lb kg 209 5300 129.9 3300 255.9 6500 239 6070 5.9 150 5.9 150 5/6 7000 3450 6400 3150 12130 5500 219 5550 135.8 3450 265.7 6750 248.8 6320 5.9 150 5.9 150 5/6 6100 2600 6100 2600 12190 5530 238 6050 145.7 145 7 3700 285.4 285 4 7250 268.5 268 5 6820 5.9 59 150 59 5.9 150 5/6 3400 1400 3100 1300 12280 5570 120 3050 83.5 2120 167.3 4250 150.4 3820 36.2 920 51.3 1302 5/10 7000 3500 7000 3500 11570 5250 129 3280 89.4 2270 176.4 4480 159.4 4050 42.1 1070 57.2 1452 5/10 7000 3500 7000 3500 11640 5280 146 3700 97.2 2470 192.9 4900 176 4470 1652 5/10 7000 3500 7000 3500 11710 5310 156 3960 104.3 2650 203.1 5160 186.2 4730 57.1 1450 72.1 1832 5/10 7000 3500 7000 3450 11790 5350 50 1270 65 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 83 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC35K TRIPLE EX DUPLEX X SIMPLEX X Mast T Type Wide Stance Maximum Fork Height Overall Lowered (MFH) (OAL) in 120 132 148 159 179 199 209 219 238 120 129 146 156 159 174 183 201 209 219 238 258 mm 3050 3350 3750 4050 4550 5050 5300 5550 6050 3050 3280 3700 3960 4050 4410 4650 5100 5310 5550 6050 6550 in 83.5 89.4 97.2 104 3 104.3 116.1 126 129.9 135.8 145.7 83.5 89.4 97.2 104.3 78.7 83.5 86.6 92.5 95.3 98.4 106.3 114.2 mm 2120 2270 2470 2650 2950 3200 3300 3450 3700 2120 2270 2470 2650 2000 2120 2200 2350 2420 2500 2700 2900 Overall Extended Height w/ Load Backrest in 167.3 179.1 194.9 206 7 206.7 226.4 246.1 255.9 265.7 285.4 167.3 176.4 192.9 203.1 206.7 220.9 230.3 248 256.3 265.7 285.4 305.1 mm 4250 4550 4950 5250 5750 6250 6500 6750 7250 4250 4480 4900 5160 5250 5610 5850 6300 6510 6750 7250 7750 w/o Load Backrest in 150.4 162.2 178 189 8 189.8 209.4 229.1 239 248.8 268.5 150.4 159.4 176 186.2 189.8 203.9 213.4 231.1 239.4 248.8 268.8 288.2 mm 3820 4120 4520 4820 5320 5820 6070 6320 6820 3820 4050 4470 4730 4820 5180 5420 5870 6080 6320 6820 7320 Freelift w/ Load Backrest in 5.9 5.9 5.9 59 5.9 5.9 5.9 5.9 5.9 5.9 36.2 42.1 50 57.1 31.5 36.2 39.4 45.3 48 51.2 59.1 66.9 mm 150 150 150 150 150 150 150 150 150 920 1070 1270 1450 800 920 1000 1150 1220 1300 1500 1700 Tilt w/o Load Backrest in 5.9 5.9 5.9 59 5.9 5.9 5.9 5.9 5.9 5.9 51.3 57.2 65 72.1 48.4 53.1 56.3 62.2 65 68.1 76 83.9 F/B Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard @24 in @ 500 @24 in @ 500 C i Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center mm 150 150 150 150 150 150 150 150 150 1302 1452 1652 1832 1230 1350 1430 1580 1650 1730 1930 2130 deg 5/10 5/10 5/10 5/10 5/6 5/6 5/6 5/6 5/6 5/10 5/10 5/10 5/10 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 lb 7000 7000 7000 7000 7000 7000 7000 6900 6600 7000 7000 7000 7000 7000 7000 7000 6900 6800 6700 6500 6200 kg 3500 3500 3500 3500 3500 3500 3450 3400 3000 3500 3500 3500 3500 3500 3500 3500 3400 3350 3300 3000 2650 lb 7000 7000 7000 7000 6800 6600 6400 6300 6100 7000 7000 7000 7000 6800 6700 6600 6400 6300 6200 6000 5700 kg 3500 3500 3500 3450 3350 3200 3150 3100 3000 3500 3500 3500 3450 3400 3300 3250 3150 3100 3050 2950 2650 lb 11550 11640 11710 11790 11990 12080 12130 12190 12280 11570 11640 11710 11790 12260 12350 12410 12520 12570 12630 12760 13100 kg 5240 5280 5310 5350 5440 5480 5500 5530 5570 5250 5280 5310 5350 5560 5600 5630 5680 5700 5730 5790 5940 278 7050 122 3100 324.8 8250 307.9 7820 74.8 1900 91.7 2330 6/5 4000 1650 3800 1550 13270 6020 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 84 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC40K Mast Type Standard Tread Maximum Fork Height Overall Lowered (MFH) (OAL) DUPLEX SIMPLEX in mm in mm Overall Extended Height Freelift w/ Load Backrest w/o Load Backrest w/ Load Backrest in in mm mm Tilt w/o Load Backrest F/B Rated Capacity w/ Forks Rated Capacity w/ Sideshifter ** Total Weight with Standard @ 500 @ 500 Carriage @24 in @24 in mm mm and 42" Forks Load Load Load Load Center Center Center Center in mm in mm deg lb kg lb kg 120 3050 83.5 2120 167.3 4250 150.4 3820 5.9 150 5.9 150 5/10 8000 4000 8000 4000 12280 5570 lb kg 132 3350 89.4 2270 179.1 4550 162.2 4120 5.9 150 5.9 150 5/10 8000 4000 8000 4000 12370 5610 148 3750 97.2 2470 194.9 4950 178 4520 5.9 150 5.9 150 5/10 8000 4000 8000 4000 12460 5650 159 4050 104.3 2650 206.7 5250 189.8 4820 5.9 150 5.9 150 5/10 8000 4000 8000 3950 12520 5680 179 4550 116.1 2950 226.4 5750 209.4 5320 5.9 150 5.9 150 5/6 8000 4000 7800 3850 12720 5770 199 5050 126 3200 246.1 6250 229.1 5820 5.9 150 5.9 150 5/6 8000 4000 7500 3700 12830 5820 209 5300 129.9 3300 255.9 6500 239 6070 5.9 150 5.9 150 5/6 8000 3600 7400 3650 12870 5840 219 55500 135.8 13 8 3450 34 0 265.7 26 6 0 248.8 6750 248 8 6320 5.99 1 0 150 5.99 1 0 150 5/6 /6 6400 26 0 2650 6400 26 0 2650 12920 5860 860 238 6050 145.7 3700 285.4 7250 268.5 6820 5.9 150 5.9 150 5/6 3400 1450 3200 1300 13030 5910 120 3050 83.5 2120 167.3 4250 150.4 3820 36.2 920 51.3 1302 5/10 8000 4000 8000 4000 12300 5580 129 3280 89.4 2270 176.4 4480 159.4 4050 42.1 1070 57.2 1452 5/10 8000 4000 8000 4000 12370 5610 146 3700 97.2 2470 192.9 4900 176 4470 1652 5/10 8000 4000 8000 4000 12460 5650 156 3960 104.3 2650 203.1 5160 186.2 4730 57.1 1450 72.1 1832 50 1270 65 5/10 8000 4000 8000 3950 12520 5680 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 85 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC40K TRIPLLEX DUPLEX X SIMPLEX Mast Typee Wide Stance Maximum Fork Height Overall Lowered (MFH) (OAL) in 120 132 148 159 179 199 209 219 238 120 129 146 156 159 174 183 201 209 219 238 258 278 mm 3050 3350 3750 4050 4550 5050 5300 5550 6050 3050 3280 3700 3960 4050 4410 4650 5100 5310 5550 6050 6550 7050 in 83.5 89.4 97 2 97.2 104.3 116.1 126 129.9 135.8 145.7 83.5 89.4 97.2 104.3 78.7 83.5 86.6 92.5 95.3 98.4 106.3 114.2 122 mm 2120 2270 2470 2650 2950 3200 3300 3450 3700 2120 2270 2470 2650 2000 2120 2200 2350 2420 2500 2700 2900 3100 Overall Extended Height w/ Load Backrest in 167.3 179.1 194 9 194.9 206.7 226.4 246.1 255.9 265.7 285.4 167.3 176.4 192.9 203.1 206.7 220.9 230.3 248 256.3 265.7 285.4 305.1 324.8 mm 4250 4550 4950 5250 5750 6250 6500 6750 7250 4250 4480 4900 5160 5250 5610 5850 6300 6510 6750 7250 7750 8250 w/o Load Backrest in 150.4 162.2 178 189.8 209.4 229.1 239 248.8 268.5 150.4 159.4 176 186.2 189.8 203.9 213.4 231.1 239.4 248.8 268.5 288.2 307.9 mm 3820 4120 4520 4820 5320 5820 6070 6320 6820 3820 4050 4470 4730 4820 5180 5420 5870 6080 6320 6820 7320 7820 Freelift w/ Load Backrest in 5.9 5.9 59 5.9 5.9 5.9 5.9 5.9 5.9 5.9 36.2 42.1 50 57.1 31.5 36.2 39.4 45.3 48 51.2 59.1 66.9 74.8 mm 150 150 150 150 150 150 150 150 150 920 1070 1270 1450 800 920 1000 1150 1220 1300 1500 1700 1900 Tilt w/o Load Backrest in 5.9 5.9 59 5.9 5.9 5.9 5.9 5.9 5.9 5.9 51.3 57.2 65 72.1 48.4 53.1 56.3 62.2 65 68.1 76 83.9 91.7 mm 150 150 150 150 150 150 150 150 150 1302 1452 1652 1832 1230 1350 1430 1580 1650 1730 1930 2130 2330 F/B deg 5/10 5/10 5/10 5/10 5/6 5/6 5/6 5/6 5/6 5/10 5/10 5/10 5/10 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with ith Standard St d d @24 in @ 500 @24 in @ 500 Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center lb 8000 8000 8000 8000 8000 8000 8000 7900 7400 8000 8000 8000 8000 8000 8000 8000 7900 7800 7700 7400 6400 4000 kg 4000 4000 4000 4000 4000 4000 3950 3900 3000 4000 4000 4000 4000 4000 4000 4000 3900 3850 3800 3000 2650 1650 lb 8000 8000 8000 8000 7800 7500 7400 7300 7100 8000 8000 8000 8000 7900 7700 7600 7400 7300 7200 6900 6300 3800 kg 4000 4000 4000 3950 3850 3700 3650 3600 3000 4000 4000 4000 3950 3900 3800 3750 3600 3550 3500 3000 2650 1550 lb 12280 12370 12460 12520 12720 12830 12870 12920 13030 12300 12370 12460 12520 13010 13070 13140 13250 13320 13360 13510 13820 14020 kg 5570 5610 5650 5680 5770 5820 5840 5860 5910 5580 5610 5650 5680 5900 5930 5960 6010 6040 6060 6130 6270 6360 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 86 MAST AND CAPACITY INFORMATION GC30K – GC70K Models Model GC40K - STR Mast Type Standard Tread Maximum Fork Height Overall Lowered (MFH) (OAL) SIMPLEX Freelift Tilt Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard Carriage @24 in @ 500 @24 in @ 500 Load mm Load Load mm Load and 42" Forks Center Center Center Center w/ Load Backrest w/o Load Backrest w/ Load Backrest w/o Load Backrest F/B in in in mm in mm deg lb kg lb kg 120 3050 83.5 2120 167.3 4250 150.4 3820 5.9 150 5.9 150 5/10 8000 4000 8000 4000 12520 5680 132 3350 89.4 2270 179.1 4550 162.2 4120 5.9 150 5.9 150 5/10 8000 4000 8000 4000 12610 5720 148 3750 97.2 2470 194.9 4950 178 4520 5.9 150 5.9 150 5/10 8000 4000 7800 3900 12700 5760 159 4050 104.3 2650 206.7 5250 189.8 4820 5.9 150 5.9 150 5/10 8000 4000 7700 3800 12760 5790 179 4550 116.1 2950 226.4 5750 209.4 5320 5.9 150 5.9 150 5/6 8000 4000 7400 3700 12960 5880 199 5050 126 3200 246.1 6250 229.1 5820 5.9 150 5.9 150 5/6 8000 3850 7200 3550 13050 5920 209 5300 129.9 129 9 3300 255.9 255 9 6500 239 6070 5.9 59 150 59 5.9 150 5/6 8000 3500 7100 3500 13100 5940 219 5550 135.8 3450 265.7 6750 248.8 6320 5.9 150 5.9 150 5/6 6100 2600 6100 2600 13160 5970 238 6050 145.7 3700 285.4 7250 268.5 6820 5.9 150 5.9 150 5/6 3400 1400 3100 1300 13270 6020 120 3050 83.5 2120 167.3 4250 150.4 3820 36.2 920 51.3 1302 5/10 8000 4000 8000 4000 12540 5960 129 3280 89.4 2270 176.4 4480 159.4 4050 42.1 1070 57.2 1452 5/10 8000 4000 8000 4000 12610 5720 146 3700 97.2 2470 192.9 4900 176 4470 1652 5/10 8000 4000 7800 3850 12700 5760 156 3960 104.3 2650 203.1 5160 186.2 4730 57.1 1450 72.1 1832 5/10 8000 4000 7700 3800 12760 5790 in DUPLEX Overall Extended Height mm in mm mm mm 50 1270 65 lb kg * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 87 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC40K - STR TRIPLLEX DUPLEX X SIMPLEX Mast Tyype Wide Stance Maximum Fork Height Overall Lowered (MFH) (OAL) in 120 132 148 159 179 199 209 219 238 120 129 146 156 159 174 183 201 209 219 238 258 278 mm 3050 3350 3750 4050 4550 5050 5300 5550 6050 3050 3280 3700 3960 4050 4410 4650 5100 5310 310 5550 6050 6550 7050 in 83.5 89.4 97.2 104.3 116.1 126 129.9 135.8 145.7 83.5 89.4 97.2 104.3 78.7 83.5 86.6 92.5 9 3 95.3 98.4 106.3 114.2 122 mm 2120 2270 2470 2650 2950 3200 3300 3450 3700 2120 2270 2470 2650 2000 2120 2200 2350 2420 2500 2700 2900 3100 Overall Extended Height w/ Load Backrest in 167.3 179.1 194.9 206.7 226.4 246.1 255.9 265.7 285.4 167.3 176.4 192.9 203.1 206.7 220.9 230.3 248 2 63 256.3 265.7 285.4 305.1 324.8 mm 4250 4550 4950 5250 5750 6250 6500 6750 7250 4250 4480 4900 5160 5250 5610 5850 6300 6 10 6510 6750 7250 7750 8250 w/o Load Backrest in 150.4 162.2 178 189.8 209.4 229.1 239 248.8 268.5 150.4 159.4 176 186.2 189.8 203.9 213.4 231.1 239 4 239.4 248.8 268.5 288.2 307.9 mm 3820 4120 4520 4820 5320 5820 6070 6320 6820 3820 4050 4470 4730 4820 5180 5420 5870 6080 6320 6820 7320 7820 Freelift w/ Load Backrest in 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 36.2 42.1 50 57.1 31.5 36.2 39.4 45.3 48 51.2 59.1 66.9 74.8 mm 150 150 150 150 150 150 150 150 150 920 1070 1270 1450 800 920 1000 1150 1220 1300 1500 1700 1900 Tilt w/o Load Backrest in 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 51.3 57.2 65 72.1 48.4 53.1 56.3 62.2 6 65 68.1 76 83.9 91.7 mm 150 150 150 150 150 150 150 150 150 1302 1452 1652 1832 1230 1350 1430 1580 16 0 1650 1730 1930 2130 2330 F/B deg 5/10 5/10 5/10 5/10 5/6 5/6 5/6 5/6 5/6 5/10 5/10 5/10 5/10 6/5 6/5 6/5 6/5 6/ 6/5 6/5 6/5 6/5 6/5 Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard @24 in @ 500 @24 in @ 500 Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center lb 8000 8000 8000 8000 8000 7800 7700 7500 7300 8000 8000 8000 8000 8000 8000 7800 7600 7500 00 7300 7200 6400 4000 kg 4000 4000 4000 4000 4000 3850 3800 3750 3000 4000 4000 4000 4000 4000 3950 3850 3750 3 00 3700 3650 3000 2650 1650 lb 8000 8000 7800 7700 7400 7200 7100 7000 6800 8000 8000 7800 7700 7500 7400 7200 7000 6900 6800 6600 6300 3800 kg 4000 4000 3900 3800 3700 3550 3500 3450 3000 4000 4000 3850 3800 3700 3650 3600 3450 3400 3350 3000 2650 1550 lb 12520 12610 12700 12760 12960 13050 13100 13160 13270 12540 12610 12700 12760 13250 13320 13400 13490 13 60 13560 13600 13760 14090 14260 kg 5680 5720 5760 5790 5880 5920 5940 5970 6020 5690 5720 5760 5790 6010 6040 6080 6120 61 0 6150 6170 6240 6390 6470 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 88 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC45K - SWB Mast Typpe Standard Tread Maximum Fork Height Overall Lowered (MFH) (OAL) SIMPLEX Freelift Tilt Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard Carriage @24 in @ 500 @24 in @ 500 and 42" Forks Load mm Load Load mm Load Center Center Center Center w/ Load Backrest w/o Load Backrest w/ Load Backrest w/o Load Backrest F/B in in mm in mm in mm deg lb kg lb kg 114 2890 83.5 2120 161 4090 145.5 3695 6.3 160 6.3 160 5/10 10000 4500 10000 4500 14260 6470 132 3350 92.5 2350 179.1 4550 163.6 4155 6.3 160 6.3 160 5/10 10000 4500 10000 4500 14370 6520 140 3550 96.5 2450 187 4750 171.5 4355 6.3 160 6.3 160 5/10 10000 4500 10000 4500 14420 6540 159 4050 110.2 2800 206.7 5250 191.1 4855 6.3 160 6.3 160 5/10 10000 4500 9900 4500 14570 6610 179 4550 120.1 3050 226.4 5750 210.8 5355 6.3 160 6.3 160 5/6 10000 4500 9600 4350 14790 6710 199 5050 129.9 3300 246.1 6250 230.5 5855 6.3 160 6.3 160 5/6 10000 4500 9300 4200 14900 6760 209 5300 133.9 3400 255.9 6500 240.4 6105 6.3 160 6.3 160 5/6 / 8900 4000 7500 3400 14950 6780 219 5550 139.8 3550 265.7 6750 250.2 6355 6.3 160 6.3 160 5/6 6000 2700 6000 2700 15040 6820 238 6050 149.6 3800 285.4 7250 269.9 6855 6.3 160 6.3 160 5/6 2200 1000 1800 800 15150 6870 112 2850 83.5 2120 159.4 4050 143.9 3655 35.2 895 44.7 1135 5/10 10000 4500 10000 4500 14290 6480 131 3330 92.5 2350 178.3 4530 162.8 4135 44.3 1125 53.7 1365 5/10 10000 4500 10000 4500 14400 6530 139 3530 96.5 96 5 2450 186.2 186 2 4730 170.7 170 7 4335 48.2 48 2 1225 57.7 57 7 1465 5/10 10000 4500 10000 4500 14460 6560 163 4130 110.2 2800 209.8 5330 194.3 4935 5/10 10000 4500 9800 4450 14640 6640 in DU UPLEX Overall Extended Height mm in mm mm 62 1575 71.5 1815 lb kg * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 89 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC45K - SWB TRIPLEX DUPLEX SIMPLEX Mast Typpe Wide Stance Maximum Fork Height Overall Lowered (MFH) (OAL) in 114 132 140 159 179 199 209 219 238 112 131 139 163 172 182 189 201 209 219 238 258 278 mm 2890 3350 3550 4050 4550 5050 5300 5550 6050 2850 3330 3530 4130 4360 4630 4800 5100 5310 5550 6050 6550 7050 in 83.5 92.5 96 5 96.5 110.2 120.1 129.9 133.9 139.8 149.6 83 5 83.5 92.5 96.5 110.2 83.5 87 92.5 96.5 99.2 102.4 110.2 118.1 126 mm 2120 2350 2450 2800 3050 3300 3400 3550 3800 2120 2350 2450 2800 2120 2210 2350 2450 2520 2600 2800 3000 3200 Overall Extended Height w/ Load Backrest in 161 179.1 187 206.7 226.4 246.1 255.9 265.7 285.4 159 4 159.4 178.3 186.2 209.8 218.9 229.5 236.2 248 256.3 265.7 285.4 305.1 324.8 mm 4090 4550 4750 5250 5750 6250 6500 6750 7250 4050 4530 4730 5330 5560 5830 6000 6300 6510 6750 7250 7750 8250 w/o Load Backrest in 145.5 163.6 171 5 171.5 191.1 210.8 230.5 240.4 250.2 269.9 143 9 143.9 162.8 170.7 194.3 203.3 214 220.7 232.5 240.7 250.2 269.9 289.6 309.3 mm 3695 4155 4355 4855 5355 5855 6105 6355 6855 3655 4135 4335 4935 5165 5435 5605 5905 6115 6355 6855 7355 7855 Freelift w/ Load Backrest in 6.3 6.3 63 6.3 6.3 6.3 6.3 6.3 6.3 6.3 35 2 35.2 44.3 48.2 62 36.2 39.8 45.3 49.2 52 55.1 63 70.9 78.7 mm 160 160 160 160 160 160 160 160 160 895 1125 1225 1575 920 1010 1150 1250 1320 1400 1600 1800 2000 Tilt w/o Load Backrest in 6.3 6.3 63 6.3 6.3 6.3 6.3 6.3 6.3 6.3 44 7 44.7 53.7 57.7 71.5 51.8 55.3 60.8 64.8 67.5 70.7 78.5 86.4 94.3 mm 160 160 160 160 160 160 160 160 160 1135 1365 1465 1815 1315 1405 1545 1645 1715 1795 1995 2195 2395 F/B deg 5 / 10 5 / 10 5 / 10 5 / 10 5/6 5/6 5/6 5/6 5/6 5 / 10 5 / 10 5 / 10 5 / 10 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard @24 in @ 500 @24 in @ 500 Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center lb 10000 10000 10000 10000 10000 10000 9900 9700 7100 10000 10000 10000 10000 10000 10000 10000 9900 9800 9700 7100 6000 3100 kg 4500 4500 4500 4500 4500 4500 4500 4400 3200 4500 4500 4500 4500 4500 4500 4500 4500 4450 4400 3200 2700 1400 lb 10000 10000 10000 9900 9600 9300 9200 9000 7100 10000 10000 10000 9800 9600 9500 9400 9200 9100 9000 7100 5800 2900 kg 4500 4500 4500 4500 4350 4200 4150 4050 3200 4500 4500 4500 4450 4350 4300 4250 4150 4100 4050 3200 2700 1300 lb 14260 14370 14420 14570 14790 14900 14950 15040 15150 14290 14400 14460 14640 15010 15080 15170 15260 15280 15320 15520 15870 16010 kg 6470 6520 6540 6610 6710 6760 6780 6820 6870 6480 6530 6560 6640 6810 6840 6880 6920 6930 6950 7040 7200 7260 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 90 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC45K - STR Mast Typpe Standard Tread Maximum Fork Height Overall Lowered (MFH) (OAL) SIMPLEX Freelift Tilt Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard Carriage @24 in @ 500 @24 in @ 500 Load mm Load Load mm Load and 42" Forks Center Center Center Center w/ Load Backrest w/o Load Backrest w/ Load Backrest w/o Load Backrest F/B in in mm in mm in mm deg lb kg lb kg 114 2890 83.5 2120 161 4090 145.5 3695 6.3 160 6.3 160 5 / 10 10000 4500 10000 4500 14290 6480 132 3350 92.5 92 5 2350 179.1 179 1 4550 163.6 163 6 4155 63 6.3 160 63 6.3 160 5 / 10 10000 4500 10000 4500 14400 6530 140 3550 96.5 2450 187 4750 171.5 4355 6.3 160 6.3 160 5 / 10 10000 4500 10000 4500 14440 6550 159 4050 110.2 2800 206.7 5250 191.1 4855 6.3 160 6.3 160 5 / 10 10000 4500 9800 4500 14620 6630 179 4550 120.1 3050 226.4 5750 210.8 5355 6.3 160 6.3 160 5/6 10000 4500 9500 4350 14810 6720 199 5050 129.9 3300 246.1 6250 230.5 5855 6.3 160 6.3 160 5/6 10000 4500 9200 4200 14930 6770 209 5300 133.9 133 9 3400 255.9 255 9 6500 240.4 240 4 6105 63 6.3 160 63 6.3 160 5/6 8900 4000 7500 3400 14990 6800 219 5550 139.8 3550 265.7 6750 250.2 6355 6.3 160 6.3 160 5/6 6000 2700 6000 2700 15060 6830 238 6050 149.6 3800 285.4 7250 269.9 6855 6.3 160 6.3 160 5/6 2200 1000 1800 800 15170 6880 112 2850 83.5 2120 159.4 4050 143.9 3655 35.2 895 44.7 1135 5 / 10 10000 4500 10000 4500 14310 6490 131 3330 92.5 2350 178.3 4530 162.8 4135 44.3 1125 53.7 1365 5 / 10 10000 4500 10000 4500 14440 6550 139 3530 96.5 2450 186.2 4730 170.7 4335 48.2 1225 57.7 1465 5 / 10 10000 4500 10000 4500 14480 6570 163 4130 110.2 2800 209.8 5330 194.3 4935 5 / 10 10000 4500 9800 4450 14660 6650 in D DUPLEX Overall Extended Height mm in mm mm 62 1575 71.5 1815 lb kg * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 91 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC45K - STR TRIPLLEX DUPLE EX SIMPLEX X Mast T Type Wide Stance Maximum Fork Height Overall Lowered (MFH) (OAL) in 114 132 140 159 179 199 209 219 238 112 131 139 163 172 182 189 201 209 219 238 258 278 mm 2890 3350 3550 4050 4550 5050 5300 5550 6050 2850 3330 3530 4130 4360 4630 4800 5100 5310 5550 6050 6550 7050 in 83.5 92.5 96.5 110 2 110.2 120.1 129.9 133.9 139.8 149.6 83.5 92 5 92.5 96.5 110.2 83.5 87 92.5 96.5 99 2 99.2 102.4 110.2 118.1 126 mm 2120 2350 2450 2800 3050 3300 3400 3550 3800 2120 2350 2450 2800 2120 2210 2350 2450 2520 2600 2800 3000 3200 Overall Extended Height w/ Load Backrest in 161 179.1 187 206 7 206.7 226.4 246.1 255.9 265.7 285.4 159.4 178 3 178.3 186.2 209.8 218.9 229.5 236.2 248 256 3 256.3 265.7 285.4 305.1 324.8 mm 4090 4550 4750 5250 5750 6250 6500 6750 7250 4050 4530 4730 5330 5560 5830 6000 6300 6510 6750 7250 7750 8250 w/o Load Backrest in 145.5 163.6 171.5 191 1 191.1 210.8 230.5 240.4 250.2 269.9 143.9 162 8 162.8 170.7 194.3 203.3 214 220.7 232.5 240 7 240.7 250.2 269.9 289.6 309.3 mm 3695 4155 4355 4855 5355 5855 6105 6355 6855 3655 4135 4335 4935 5165 5435 5605 5905 6115 6355 6855 7355 7855 Freelift w/ Load Backrest in 6.3 6.3 6.3 63 6.3 6.3 6.3 6.3 6.3 6.3 35.2 44 3 44.3 48.2 62 36.2 39.8 45.3 49.2 52 55.1 63 70.9 78.7 mm 160 160 160 160 160 160 160 160 160 895 1125 1225 1575 920 1010 1150 1250 1320 1400 1600 1800 2000 Tilt w/o Load Backrest in 6.3 6.3 6.3 63 6.3 6.3 6.3 6.3 6.3 6.3 44.7 53 7 53.7 57.7 71.5 51.8 55.3 60.8 64.8 67 5 67.5 70.7 78.5 86.4 94.3 mm 160 160 160 160 160 160 160 160 160 1135 1365 1465 1815 1315 1405 1545 1645 1715 1795 1995 2195 2395 F/B deg 5 / 10 5 / 10 5 / 10 5 / 10 5/6 5/6 5/6 5/6 5/6 5 / 10 5 / 10 5 / 10 5 / 10 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard @24 in @ 500 @24 in @ 500 C i Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center lb 10000 10000 10000 10000 10000 9900 9700 9600 7100 10000 10000 10000 10000 10000 10000 10000 9800 9700 9600 7100 6000 3100 kg 4500 4500 4500 4500 4500 4500 4450 4400 3200 4500 4500 4500 4500 4500 4500 4500 4450 4400 4350 3200 2700 1400 lb 10000 10000 10000 9800 9500 9200 9100 9000 7100 10000 10000 10000 9800 9600 9400 9300 9100 9000 8900 7100 5800 2900 kg 4500 4500 4500 4500 4350 4200 4150 4050 3200 4500 4500 4500 4450 4350 4300 4250 4150 4100 4050 3200 2700 1300 lb 14290 14400 14440 14620 14810 14930 14990 15060 15170 14310 14440 14480 14660 15040 15100 15210 15280 15300 15340 15560 15900 16030 kg 6480 6530 6550 6630 6720 6770 6800 6830 6880 6490 6550 6570 6650 6820 6850 6900 6930 6940 6960 7060 7210 7270 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 92 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC55K Mast Type Standard Tread Maximum Fork Height Overall Lowered (MFH) (OAL) SIMPLEX Freelift Tilt Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard Carriage @24 in @ 500 @24 in @ 500 Load mm Load Load mm Load and 42" Forks Center Center Center Center w/ Load Backrest w/o Load Backrest w/ Load Backrest w/o Load Backrest F/B in in mm in mm in mm deg lb kg lb kg 114 2900 83.5 2120 162.4 4125 151.4 3846 6.3 160 6.3 160 5 / 10 12000 5500 12000 5500 15850 7190 132 3360 92.5 2350 180.5 4585 169.5 4306 6.3 160 6.3 160 5 / 10 12000 5500 12000 5500 15960 7240 140 3560 96.5 2450 188.4 4785 177.4 4506 6.3 160 6.3 160 5 / 10 12000 5500 12000 5500 16030 7270 160 4060 110.2 2800 208.1 5285 197.1 5006 6.3 160 6.3 160 5 / 10 12000 5500 12000 5500 16180 7340 180 4560 120.1 3050 227.8 5785 216.8 5506 6.3 160 6.3 160 5/6 12000 5500 11600 5250 16380 7430 199 5060 129.9 3300 247.4 6285 236.5 6006 6.3 160 6.3 160 5/6 12000 5500 11300 5100 16510 7490 209 5310 133.9 3400 257.3 6535 246.3 6256 6.3 160 6.3 160 5/6 12000 5500 11100 5000 16560 7510 219 5560 139.8 3550 267.1 6785 256.1 6506 6.3 160 6.3 160 5/6 10000 4500 10000 4500 16620 7540 239 6060 149.6 3800 286.8 7285 275.8 7006 6.3 160 6.3 160 5/6 5800 2600 5500 2500 16750 7600 113 2860 83.5 2120 160.8 4085 149.1 3786 35.2 895 44.7 1135 5 / 10 12000 5500 12000 5500 15900 7210 131 3340 92.5 2350 179.7 4565 168 4266 44.3 1125 53.7 1365 5 / 10 12000 5500 12000 5500 16010 7260 139 3540 96.5 2450 187.6 4765 175.8 4466 48.2 1225 57.7 1465 5 / 10 12000 5500 12000 5500 16070 7290 163 4140 110.2 2800 211.2 5365 199.4 5066 5 / 10 12000 5500 11900 5400 16250 7370 in DUP PLEX Overall Extended Height mm in mm mm 62 1575 71.5 1815 lb kg * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 93 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC55K TRIPLEX DUPLEX X SIMPLEX Mast T Type Wide Stance Maximum Fork Height Overall Lowered (MFH) (OAL) in 114 132 140 160 180 199 209 219 239 113 131 139 163 161 172 189 201 209 219 239 258 278 mm 2900 3360 3560 4060 4560 5060 5310 5560 6060 2860 3340 3540 4140 4100 4370 4810 5110 5320 5560 6060 6560 7060 in 83.5 92.5 96.5 110.2 120.1 129.9 133.9 139.8 149.6 83.5 92.5 96.5 110.2 83.5 87 92.5 96.5 99.2 102.4 110.2 118.1 126 mm 2120 2350 2450 2800 3050 3300 3400 3550 3800 2120 2350 2450 2800 2120 2210 2350 2450 2520 2600 2800 3000 3200 Overall Extended Height w/ Load Backrest in 162.4 180.5 188.4 208.1 227.8 247.4 257.3 267.1 286.8 160.8 179.7 187.6 211.2 209.6 220.3 237.6 249.4 257.7 267.1 286.8 306.5 326.2 mm 4125 4585 4785 5285 5785 6285 6535 6785 7285 4085 4565 4765 5365 5325 5595 6035 6335 6545 6785 7285 7785 8285 w/o Load Backrest in 151.4 169.5 177.4 197.1 216.8 236.5 246.3 256.1 275.8 149.1 168 175.8 199.4 197.9 208.5 225.8 237.6 245.9 255.4 275 294.7 314.4 mm 3846 4306 4506 5006 5506 6006 6256 6506 7006 3786 4266 4466 5066 5026 5296 5736 6036 6246 6486 6986 7486 7986 Freelift w/ Load Backrest in 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 35.2 44.3 48.2 62 35.2 38.8 44.3 48.2 51 54.1 62 69.9 77.8 mm 160 160 160 160 160 160 160 160 160 895 1125 1225 1575 895 985 1125 1225 1295 1375 1575 1775 1975 Tilt w/o Load Backrest in 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 44.7 53.7 57.7 71.5 47 50.6 56.1 60 62.8 65.9 73.8 81.7 89.6 mm 160 160 160 160 160 160 160 160 160 1135 1365 1465 1815 1195 1285 1425 1525 1595 1675 1875 2075 2275 F/B deg 5 / 10 5 / 10 5 / 10 5 / 10 5/6 5/6 5/6 5/6 5/6 5 / 10 5 / 10 5 / 10 5 / 10 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard @24 in @ 500 @24 in @ 500 C i Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center lb 12000 12000 12000 12000 12000 12000 12000 11800 11300 12000 12000 12000 12000 12000 12000 12000 12000 11900 11800 11300 9400 5900 kg 5500 5500 5500 5500 5500 5500 5500 5350 5100 5500 5500 5500 5500 5500 5500 5500 5500 5400 5350 5100 4250 2650 lb 12000 12000 12000 12000 11600 11300 11100 11000 10700 12000 12000 12000 11900 11800 11700 11400 11200 11100 10900 10600 9200 5800 kg 5500 5500 5500 5500 5250 5100 5050 5000 4850 5500 5500 5500 5400 5350 5300 5150 5050 5000 4950 4800 4150 2600 lb 15850 15960 16030 16180 16380 16510 16560 16620 16750 15900 16010 16070 16250 16600 16670 16780 16870 16890 16910 17130 17480 17610 kg 7190 7240 7270 7340 7430 7490 7510 7540 7600 7210 7260 7290 7370 7530 7560 7610 7650 7660 7670 7770 7930 7990 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 94 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC55K - STR Mast Typee Standard Tread Maximum Fork Height Overall Lowered (MFH) (OAL) SIMPLEX Freelift Tilt Rated Capacity Rated Capacity w/ Forks w/ Sideshifter ** Total Weight with Standard @ 500 @ 500 Carriage @24 in @24 in mm mm and 42" Forks Load Load Load Load Center Center Center Center w/ Load Backrest w/o Load Backrest w/ Load Backrest w/o Load Backrest F/B in in in mm in mm deg lb kg lb kg 114 2900 83.5 2120 162.4 4125 151.4 3846 6.3 160 6.3 160 5 / 10 12000 5500 12000 5500 16600 7530 132 3360 92.5 92 5 2350 180.5 180 5 4585 169.5 169 5 4306 6.3 63 160 63 6.3 160 5 / 10 12000 5500 12000 5500 16710 7580 140 3560 96.5 2450 188.4 4785 177.4 4506 6.3 160 6.3 160 5 / 10 12000 5500 11900 5400 16750 7600 160 4060 110.2 2800 208.1 5285 197.1 5006 6.3 160 6.3 160 5 / 10 12000 5500 11600 5250 16930 7680 180 4560 120.1 3050 227.8 5785 216.8 5506 6.3 160 6.3 160 5/6 12000 5500 11200 5050 17130 7770 199 5060 129.9 3300 247.4 6285 236.5 6006 6.3 160 6.3 160 5/6 11800 5350 10900 4950 17240 7820 209 5310 133.9 3400 257.3 6535 246.3 6256 6.3 160 6.3 160 5/6 11600 5250 10800 4900 17310 7850 219 5560 139.8 3550 267.1 6785 256.1 6506 6.3 160 6.3 160 5/6 10000 4500 10000 4500 17370 7880 239 6060 149.6 3800 286.8 7285 275.8 7006 6.3 160 6.3 160 5/6 5800 2600 5500 2500 17480 7930 113 2860 83.5 2120 160.8 4085 149.1 3786 35.2 895 44.7 1135 5 / 10 12000 5500 12000 5500 16620 7540 131 3340 92.5 2350 179.7 4565 168 4266 44.3 1125 53.7 1365 5 / 10 12000 5500 12000 5500 16730 7590 139 3540 96.5 2450 187.6 4765 175.8 4466 48.2 1225 57.7 1465 5 / 10 12000 5500 11900 5400 16800 7620 163 4140 110.2 2800 211.2 5365 199.4 5066 12000 5500 11500 5200 16980 7700 in DUPLEX Overall Extended Height mm in mm mm mm 62 1575 71.5 1815 5 / 10 lb kg * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 95 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC55K - STR TRIPLEX X DUPLEX SIMPLEX Mast T Type Wide Stance Maximum Fork Height Overall Lowered (MFH) (OAL) in 114 132 140 160 180 199 209 219 239 113 131 139 163 161 172 189 201 209 219 239 258 278 mm 2900 3360 3560 4060 4560 5060 5310 5560 6060 2860 3340 3540 4140 4100 4370 4810 5110 5320 5560 6060 6560 7060 in 83.5 92.5 96.5 110.2 120.1 129.9 133.9 139.8 149.6 83.5 92.5 96.5 110.2 83.5 87 92.5 96 5 96.5 99.2 102.4 110.2 118.1 126 mm 2120 2350 2450 2800 3050 3300 3400 3550 3800 2120 2350 2450 2800 2120 2210 2350 2450 2520 2600 2800 3000 3200 Overall Extended Height w/ Load Backrest in 162.4 180.5 188.4 208.1 227.8 247.4 257.3 267.1 286.8 160.8 179.7 187.6 211.2 209.6 220.3 237.6 249 4 249.4 257.7 267.1 286.8 306.5 326.2 mm 4125 4585 4785 5285 5785 6285 6535 6785 7285 4085 4565 4765 5365 5325 5595 6035 6335 6545 6785 7285 7785 8285 w/o Load Backrest in 151.4 169.5 177.4 197.1 216.8 236.5 246.3 256.1 275.8 149.1 168 175.8 199.4 197.9 208.5 225.8 237 6 237.6 245.9 255.4 275 294.7 314.4 mm 3846 4306 4506 5006 5506 6006 6256 6506 7006 3786 4266 4466 5066 5026 5296 5736 6036 6246 6486 6986 7486 7986 Freelift w/ Load Backrest in 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 35.2 44.3 48.2 62 35.2 38.8 44.3 48 2 48.2 51 54.1 62 69.9 77.8 mm 160 160 160 160 160 160 160 160 160 895 1125 1225 1575 895 985 1125 1225 1295 1375 1575 1775 1975 Tilt w/o Load Backrest in 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 44.7 53.7 57.7 71.5 47 50.6 56.1 60 62.8 65.9 73.8 81.7 89.6 mm 160 160 160 160 160 160 160 160 160 1135 1365 1465 1815 1195 1285 1425 1525 1595 1675 1875 2075 2275 F/B deg 5 / 10 5 / 10 5 / 10 5 / 10 5/6 5/6 5/6 5/6 5/6 5 / 10 5 / 10 5 / 10 5 / 10 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 6/5 Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard @24 in @ 500 @24 in @ 500 C i Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center lb 12000 12000 12000 12000 12000 11800 11600 11400 11100 12000 12000 12000 12000 12000 12000 11800 11600 11400 11300 11000 9400 5900 kg 5500 5500 5500 5500 5500 5350 5250 5150 5000 5500 5500 5500 5500 5500 5500 5350 5250 5150 5100 5000 4250 2650 lb 12000 12000 11900 11600 11200 10900 10800 10600 10300 12000 12000 11900 11500 11500 11300 10900 10700 10600 10500 10200 9200 5800 kg 5500 5500 5400 5250 5050 4950 4900 4800 4650 5500 5500 5400 5200 5200 5100 4950 4850 4800 4750 4600 4150 2600 lb 16600 16710 16750 16930 17130 17240 17310 17370 17480 16620 16730 16800 16980 17330 17390 17500 17590 17610 17640 17860 18210 18340 kg 7530 7580 7600 7680 7770 7820 7850 7880 7930 7540 7590 7620 7700 7860 7890 7940 7980 7990 8000 8100 8260 8320 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 96 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC60K TRIPLLEX SIMPLEX Mast Type Standard Tread Maximum Fork Height Overall Lowered (MFH) (OAL) in mm Overall Extended Height Freelift Tilt w/ Load Backrest w/o Load Backrest w/ Load Backrest w/o Load Backrest F/B in in mm Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard @24 in @ 500 @24 in @ 500 Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center in mm mm in mm in mm deg lb kg lb kg 93 2365 84.6 2150 141.1 3585 134.8 3425 6.5 165 6.5 165 6/9 13500 6000 13500 6000 19310 8760 121 3065 98.4 2500 168.7 4285 162.4 4125 6.5 165 6.5 165 6/9 13500 6000 13500 6000 19530 8860 132 3365 104.3 2650 180.5 4585 174.2 4425 6.5 165 6.5 165 6/9 13500 6000 13500 6000 19620 8900 140 3565 108.3 2750 188.4 4785 182.1 4625 6.5 165 6.5 165 6/9 13500 6000 13500 6000 19690 8930 160 4065 118.1 3000 208.1 5285 201.8 5125 6.5 165 6.5 165 6/9 13500 6000 13400 6000 19860 9010 180 4565 128 3250 227.8 5785 221.5 5625 6.5 165 6.5 165 6/5 13500 6000 13000 5900 20130 9130 199 5065 141.7 3600 247.4 6285 241.1 6125 6.5 165 6.5 165 6/5 13500 6000 12600 5700 20350 9230 219 5565 151.6 151 6 3850 267.1 267 1 6785 260.8 260 8 6625 65 6.5 165 65 6.5 165 6/5 13200 6000 12200 5500 20500 9300 239 6065 161.4 4100 286.8 7285 280.5 7125 6.5 165 6.5 165 6/5 12900 5850 11900 5400 20680 9380 148 3765 86.6 2200 196.3 4985 186 4725 38.6 980 46.3 1175 6/5 13500 6000 13500 6000 20240 9180 172 4365 94.5 2400 219.9 5585 209.6 5325 46.5 1180 54.1 1375 6/5 13500 6000 13100 5950 20440 9270 188 4765 99.4 2525 235.6 5985 225.4 5725 51.4 1305 59.1 1500 6/5 13500 6000 12800 5800 20570 9330 199 5065 103.3 2625 247.4 6285 237.2 6025 55.3 1405 1600 6/5 13500 6000 12500 5650 20680 9380 219 5565 110.2 110 2 2800 267.1 267 1 6785 256.9 256 9 6525 62.2 62 2 1580 69.9 69 9 1775 6/5 13200 6000 12200 5500 20920 9490 233 5925 115 2920 281.3 7145 271.1 6885 66.9 1700 74.6 1895 6/5 12900 5850 11900 5400 20990 9520 258 6565 126 3200 306.5 7785 296.3 7525 1980 85.6 2175 6/5 12400 5600 11500 5200 21450 9730 280 7115 133.9 3400 328.1 8335 317.9 8075 85.8 2180 93.5 2375 6/5 9500 4300 9300 4200 21670 9830 299 7585 139.8 3550 346.7 8805 336.4 8545 91.7 2330 99.4 2525 6/5 5900 2650 5400 2450 21830 9900 78 63 lb kg * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 97 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC70K T TRIPLEX SIMPLEX Mast Typpe Standard Tread Maximum Fork Height Overall Lowered (MFH) (OAL) in mm Overall Extended Height Freelift Tilt w/ Load Backrest w/o Load Backrest w/ Load Backrest w/o Load Backrest F/B in in mm Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard @24 in @ 500 @24 in @ 500 Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center in mm mm in mm in mm deg lb kg lb kg 93 lb kg 2365 84.6 2150 141.1 3585 134.8 3425 6.5 165 6.5 165 6/9 15500 7000 15000 6800 20900 9480 121 3065 98.4 2500 168.7 4285 162.4 4125 6.5 165 6.5 165 6/9 15500 7000 15000 6800 21120 9580 132 3365 104.3 2650 180.5 4585 174.2 4425 6.5 165 6.5 165 6/9 15500 7000 15000 6800 21210 9620 140 3565 108.3 2750 188.4 4785 182.1 4625 6.5 165 6.5 165 6/9 15500 7000 15000 6800 21270 9650 160 4065 118.1 3000 208.1 5285 201.8 5125 6.5 165 6.5 165 6/9 15500 7000 15000 6800 21430 9720 180 4565 128 3250 227.8 5785 221.5 5625 6.5 165 6.5 165 6/5 15500 7000 14900 6750 21720 9850 199 5065 141.7 3600 247.4 6285 241.1 6125 6.5 165 6.5 165 6/5 15500 7000 14500 6550 21940 9950 219 5565 151.6 3850 267.1 6785 260.8 6625 6.5 165 6.5 165 6/5 15200 6900 14100 6400 22090 10020 239 6065 161.4 4100 286.8 7285 280.5 7125 6.5 165 6.5 165 6/5 14800 6700 13700 6200 22240 10090 148 3765 86.6 2200 196.3 4985 186 4725 38.6 980 46.3 1175 6/5 15500 7000 15000 6800 21800 9890 172 4365 94.5 2400 219.9 5585 209.6 5325 46.5 1180 54.1 1375 6/5 15500 7000 15000 6800 22020 9990 188 4765 99.4 2525 235.6 5985 225.4 5725 51.4 1305 59.1 1500 6/5 15500 7000 14700 6650 22160 10050 199 5065 103.3 2625 247.4 6285 237.2 6025 55.3 1405 1600 6/5 15500 7000 14400 6500 22270 10100 219 5565 110.2 2800 267.1 6785 256.9 6525 62.2 1580 69.9 1775 6/5 15100 6850 14000 6350 22490 10200 233 5925 115 2920 281.3 281 3 7145 271.1 271 1 6885 66.9 66 9 1700 74.6 74 6 1895 6/5 14800 6700 13800 6250 22550 10230 258 6565 126 3200 306.5 7785 296.3 7525 1980 85.6 2175 6/5 14300 6500 13200 6000 23040 10450 280 7115 133.9 3400 328.1 8335 317.9 8075 85.8 2180 93.5 2375 6/5 9500 4300 9300 4200 23240 10540 299 7585 139.8 3550 346.7 8805 336.4 8545 91.7 2330 99.4 2525 6/5 5900 2650 5400 2450 23410 10620 78 63 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 98 MAST AND CAPACITY INFORMATION GC35K – GC70K Models Model GC70K - STR TRIPLEX SIMPLEX Mast Tyype Standard Tread Maximum Fork Height Overall Lowered (MFH) (OAL) in mm Overall Extended Height w/ Load Backrest w/o Load Backrest in in mm Freelift w/ Load Backrest Tilt w/o Load Backrest F/B Rated Capacity w/ Rated Capacity Forks w/ Sideshifter ** Total Weight with Standard @24 in @ 500 @24 in @ 500 Carriage Load mm Load Load mm Load and 42" Forks Center Center Center Center in mm mm in mm in mm deg lb kg lb kg 93 2365 84.6 2150 141.1 3585 134.8 3425 6.5 165 6.5 165 6/9 15500 7000 15000 6800 21870 9920 lb kg 121 3065 98.4 2500 168.7 4285 162.4 4125 6.5 165 6.5 165 6/9 15500 7000 15000 6800 22090 10020 132 3365 104.3 104 3 2650 180.5 180 5 4585 174.2 174 2 4425 65 6.5 165 65 6.5 165 6/9 15500 7000 15000 6800 22180 10060 140 3565 108.3 2750 188.4 4785 182.1 4625 6.5 165 6.5 165 6/9 15500 7000 15000 6800 22240 10090 160 4065 118.1 3000 208.1 5285 201.8 5125 6.5 165 6.5 165 6/9 15500 7000 15000 6800 22420 10170 180 4565 128 3250 227.8 5785 221.5 5625 6.5 165 6.5 165 6/5 15500 7000 14900 6750 22690 10290 199 5065 141.7 3600 247.4 6285 241.1 6125 6.5 165 6.5 165 6/5 15500 7000 14500 6550 22910 10390 219 5565 151.6 3850 267.1 6785 260.8 6625 6.5 165 6.5 165 6/5 15200 6900 14100 6400 23060 10460 239 6065 161.4 161 4 4100 286.8 286 8 7285 280.5 280 5 7125 65 6.5 165 65 6.5 165 6/5 14800 6700 13700 6200 23240 10540 148 3765 86.6 2200 196.3 4985 186 4725 38.6 980 46.3 1175 6/5 15500 7000 15000 6800 22800 10340 172 4365 94.5 2400 219.9 5585 209.6 5325 46.5 1180 54.1 1375 6/5 15500 7000 15000 6800 22990 10430 188 4765 99.4 2525 235.6 5985 225.4 5725 51.4 1305 59.1 1500 6/5 15500 7000 14700 6650 23130 10490 199 5065 103.3 2625 247.4 6285 237.2 6025 55.3 1405 1600 6/5 15500 7000 14400 6500 23240 10540 219 5565 110.2 2800 267.1 6785 256.9 6525 62.2 1580 69.9 1775 6/5 15100 6850 14000 6350 23480 10650 233 5925 115 2920 281.3 7145 271.1 6885 66.9 1700 74.6 1895 6/5 14800 6700 13800 6250 23550 10680 258 6565 126 3200 306.5 7785 296.3 7525 78 63 1980 85.6 2175 6/5 14300 6500 13200 6000 24010 10890 280 7115 133.9 3400 328.1 8335 317.9 8075 85.8 2180 93.5 2375 6/5 9500 4300 9300 4200 24230 10990 299 7585 139.8 3550 346.7 8805 336.4 8545 91.7 2330 99.4 2525 6/5 5900 2650 5400 2450 24380 11060 * Contact CSM Group to obtain capacities ** Capacity based on model equipped with MCFA OEM integral sideshifter NOTE: These specifications assume the use of drive axles, tires, and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (MCFA). (See ANSI/ITSDF B56.1 Part II 4.2.) TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 99 GC35K – GC70K Models Truck Specifications TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 100 GC35K – GC70K Models Please refer to Brochures for truck specifications specifications. The truck specification will be available in electronic sales manual in early 2010. TheinformationsetforthhereinisconfidentialandisnotfordistributionbeyondMCFAanditsauthorizedCatlifttruckdealernetwork. Copyright©2010byMCFA.Allrightsreserved.ReproductionofthismaterialinanyformisprohibitedwithoutexpresspermissionfromMCFA. 100 MCFE Hefbrugweg 77, 1332 AM Almere, The Netherlands Phone:+31 36 549 4411 Fax:+31 36 549 4698 Lift truck news LTN11-07C Product Management Group 15 November 2007 GC35 - 70K Product Enhancements We are pleased to announce enhancements to the GC35K-GC70K IC cushion tire forklift truck family. This update consists of some component changes which affects the standard truck configuration and specifications. There is also a change in the model line up. Standard configuration and option changes. This model now has a new stamped engine cover which features smooth rounded edges and contributes to improved ergonomics. This new engine cover coupled with a taller standard overhead guard, which accommodates the new full suspension seat which is now standard. Please note that the overall height has been increased with 50 mm to 2205 mm, as stated in the latest specification sheet which can be found on the Dealer Support Site. Model line up changes The full size GC45K is no longer available . The GC45K SWB is still available to suit most of the applications where the full size GC45K was sold before. Model line: Model GC35K GC40K GC40K STR GC45K SWB GC45K STR GC55K GC55K STR GC60K GC70K GC70K STR Nominal capacity 3500 kg @ 500 mm 4000 kg @ 500 mm 4000 kg @ 500 mm 4500 kg @ 600 mm 4500 kg @ 600 mm 5500 kg @ 600 mm 5500 kg @ 600 mm 6000 kg @ 600 mm 7000 kg @ 600 mm 7000 kg @ 600 mm Notes: Short turning radius with lead filled counterweight Short wheelbase version Wheelbase 1575 mm Short turning radius with lead filled counterweight Short turning radius with lead filled counterweight Short turning radius with lead filled counterweight CSM For the applications where a mast with a Class IV carriage is required please contact Kenneth Razab Sekh at the CSM department: [email protected] MCFE Hefbrugweg 77, 1332 AM Almere, The Netherlands Phone:+31 36 549 4411 Fax:+31 36 549 4698 Specification changes The GC55K STR counterweight has been increased to improve greater capacity in clamp applications. New mast tables are available on the Dealer Support Site. For residual capacities with specific attachments, please contact our Design Department at [email protected] Model names and serial numbers The nomenclature will not change with the exception of a “3” suffix to denote the product update. The serial numbers will be affected with the sixth digit becoming a “2”. Literature The electronic specification sheet will be available for download via: www.catliftdealer.com. Navigate from the homepage to the upper left corner from “Products to LP gas range, Gas lift trucks 3.5~7.0 ton Cushion / spec sheet”. For further information please contact: Kasper Blankenzee Product manager IC trucks [email protected] MCFE Hefbrugweg 77, 1332 AM Almere, The Netherlands Phone:+31 36 549 4411 Fax:+31 36 549 4698 Lift Truck News LTN08-08C Product Management Group Almere, June 16 2008 1.5 ~ 7.0 ton Cushion Tire Lift Trucks Product Update We are pleased to announce a product update for all cushion tire counter balance trucks in the 1.5 through 7.0 model range, manufactured in Houston USA. With immediate effect, a number of optional features have now been incorporated in the standard configuration. LED Lighting Light Emitting Diode (LED) lighting has now been introduced. The downtime and Total Cost of Ownership (TCO) will be lower, since LED lights are practically maintenance free. The truck battery load is reduced because LED lighting is more efficient compared to conventional lights. • LED front work lights are fitted standard on all cushion tire trucks in this model range. • LED stop-, tail- and brake lights are standard on all cushion tire trucks in this range. Operator Comfort With operator comfort in mind following features are changed: • A full suspension seat is now standard on all models. • A rubber floor mat is standard, replacing the previous sandpaper mat. • A convenience tray is available as an option for 2.0, 3.0 and 3.5 ton models. This tray, mounted on the engine cover, allows the operator to store personal items or small tools used during work. • A Clip-board holder is mounted as standard on the right front leg of the overhead guard for models with capacities 4 ton and up including the 7 ton model. Belly Plate The underbelly screen is now standard equipped on LPG engine powered cushion trucks in this range to even further reduce noise. Besides noise reduction, a cleaner engine compartment is another benefit. (The under-belly cover is not available on LPG trucks with 1.5 and 1.8 ton capacity or on electric trucks). Customer Specified Modification (CSM) • An armrest to support the operator’ arm is available as a CSM option. Note that this armrest on cushion trucks is in combination with MC control (FC is not available). • A swivel seat can also be delivered as CSM option. For more information please contact: Han van de Wal, Product Manager IC Trucks e-mail: [email protected]