Transcript
SPECIFICATIONS
LIGHTPLANE 1 LP1 | Suspended, Surface
Find additional images and information at
alwusa.com/lp1
LIGHTPLANE 1 – LP1 Suspended, Surface
1. BASE MODEL
LP1SD LP1SI LP1SMB LP1SWW
___ ___
2. RUN LENGTH/ SIZE
SPECIFICATIONS
1" suspended direct 1" suspended indirect 1" wall/surface back-mounted, front-facing 1" wall/surface mount with adjustable knuckle
Page 2 of 4
Individual (2’, 3’, 4’, 5', 6’, 7’ or 8’) Continuous row or Configuration1 (enter total linear length, ex: 20’)
1
3. LAMPING
A configuration is a custom shape (rectangle square, L, etc.) with mitered corners. Must choose quantity of mitered corners in Additional Options.
All lengths are nominal and may vary based on lamping and other specfication selections. Consult factory when exact lengths are required.
LED2 LOW3 MED HI 3
Pair lamping with CCT (where applicable), ex: MED/2700K
Low-output, high-performance LED – 397 delivered lm/ft, 7.2 W/lf, 55 lm/W 2700K
3000K
3500K
4000K
Medium-output, high performance LED – 529 delivered lm/ft, 9.6 W/lf, 55 lm/W 2700K
3000K
3500K
4000K
High-output, high-performance LED – 661 delivered lm/ft, 12 W/lf, 55 lm/W 2700K
DECOR3
3000K
3500K
4000K
Decorative constant voltage LED, 176 delivered lm/ft, 4.4 W/lf, 40 lm/W 3000K
3500K
4000K
2 LED board options may be limited and/or subsituted to accomodate requests for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory. 3 Performance calculations are extrapolated estimates based on the actual IES test results of MED option at 3500K
4. REMOTE DRIVER
5. LENS
0/10V/4
0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
10% Standard dimming to 10%
DALI4 DMX4 HILUME/A34 NONDIM
DALI flicker-free dimming down to 0% DMX flicker-free dimming down to 0% Lutron® Hi-lume™ A L3D Series EcoSystem® or 3-wire with flicker-free dimming down to 1% Non-dimming driver
Driver option may be limited with 347 voltage. Consult factory.
4
EXT/F EXT/R
Extra diffuse, flush lens Extra diffuse, reveal
1% Dimming to 1%
When specified with LOW, MED or HI LEDs, perceptible shadowing will be visible on the lens surface when dimmed below 15%
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530 n
n
E
TalkToUs@alwusa com n
W
alwusa com n
3 6
LIGHTPLANE 1 – LP1 Suspended, Surface
SPECIFICATIONS 6. FINISH
AL BK WH RAL/ ___
Natural "Ultimatte" aluminum Black powdercoat White powdercoat RAL powdercoat color (ex: RAL37)
7. VOLTAGE
120 277 UNV 3475
120 volt 277 volt Universal voltage 347 volt
5
8. ADDITIONAL OPTIONS
COMBO
Page 3 of 4
5
1 16 " options may be limited with 347 voltage. Consult factory. Driver/ballast
Combination 4.5" canopies at feed locations with both
1163 " 1165 "power feed and suspension mounting hardware
EMC___6 EMB___6 SB
Emergency circuit (indicate total quantity, ex: EMC/4) 1 165 Emergency " Remote battery pack (indicate total quantity, ex: EMB/4) Seismic bracing MR1SMB
6
DIMENSIONS
1165 "
Shown with Mounting Bracket 3
Consult factory for available options
116 "
REMOTE DRIVER INFO
1163 " MR1SMB Shown with Mounting Bracket
MAXIMUM REMOTE DRIVER DISTANCE* Driver
1" 3 MR1SD 116 " Shown with Flush Lens (EXT/F)
18 Wire Gauge
1167 "
1"
1"
MR1SD LP1SD WITH Shown with FLUSH LENS(EXT/F) (EXT/F) Flush Lens
1 "
7 MR1SD LP1SD WITH 16
Shown with REVEAL LENS (EXT/R)
Reveal Lens (EXT/R)
1" 5 8
5 MR1SD 8" Shown with Reveal Lens (EXT/R)
"
18 Wire Gauge w/ Remote Emergency
LOW,MED,HI
DECOR
LOW,MED,HI
DECOR
0/10V/
120 ft
18 ft
10 ft
10ft
DALI DMX
72 ft
Consult Factory
10 ft
Consult Factory
HILUME/A3
22 ft
15 ft
10 ft
10 ft
* Maximum distance includes length of power feed cable suspended from remote driver to luminaire. 45°
Ex: 72' max length - 3' suspension = 69' available to run from remote driver to building power.
1 165 "
1 165 " 1163 "
1165 "
1"
1 161 "
MR1SMB
LP1SMB Shown with WITH ACCOMPANYING Mounting Bracket SURFACE-MOUNT BRACKET
"
LP1SSW WITH ADJUSTABLE KNUCKLE
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530 n
n
E
TalkToUs@alwusa com n
W
alwusa com n
LIGHTPLANE 1 – LP1 Suspended, Surface
SPECIFICATIONS
HOUSING
Page 4 of 4
100% recyclable, extruded architectural grade T6061 aluminum with .08" minimum wall thickness.
LINEAR LENS OPTIONS Extruded, twin-layered, high-impact acrylic. EXT is white and extra diffuse with minimal-to-no source visibility. Choose from flush or reveal (dropped).
ELECTRICAL Class 2 remote drivers are provided with 10' plenum-rated cable. ETL listed for damp location. EMERGENCY Luminaires can be wired for emergency circuit and/or emergency battery backup. Limitations may exist depending on configuration. Consult factory for details. SUSEPENDED MOUNTING
SURFACE MOUNTING
STANDARD SUSPENDED
FLUSH LENS – EXT/F
FINISH
(2) SMB brackets per 4' segment for wall and ceiling mounting.
(1) 4.5" canopy per power feed location
REVEAL LENS – EXT/R
Standard finish is "Ultimatte" aluminum — a smooth, clean and durable finish achieved from a deep-etch and two-step clear anodizing process. White, black and color RAL powdercoat options also available.
(1) bullet mount, (1) 8' aircraft cable and (1) 2" canopy (for use with T-bar mounting) per suspension point OPTIONS Eye Bolt (By Others) Gripper w/Hook
2-Cable Clamp
"Ultimatte" Aluminum – AL
White – WH
Black – BK
Color – RAL
Aircraft Cable
SEISMIC BRACING
COMBO CANOPY
Add-on hardware includes cable gripper with hook, 2-cable clamp and specified length of aircraft cable per suspension point
Choose COMBO to specfiy 4.5" canopies at feed locations with power feed and aircraft cable suspension mounting
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530 n
n
E
TalkToUs@alwusa com n
W
alwusa com n
