Transcript
LILIN PoE Solution 2014/09/21
LAS-102
PoE Technology Centralized power management
DVR/NVR
PIH-931 Keyboard
DC48V Full Power PoE+ Switch 50W PoE Injector (IJ5056D )
AWG 18 100M
100M
IEEE 802.3af, class 3, 15.4W PoE 40W
100M
Distributed
IPD552 IPD112ESX
IPG012ES
IPR614ES
IPR31ESX
IPR414ESX
Low power IP camera DC12V
100M High power IP camera AC24 100M
12W PoE Splitter (SL1212D)
40W PoE+ Splitter (SL4024A/SL4012D)
Ethernet with no power Ethernet with 48VDC 12VDC 24VAC 48VDC
IPS125/130/135 (H.264)
Recommended PoE PTZ Selection Guide -40°C ~ + 50°C (-40°F ~ 122°F) Output: DC12V or SL4024A 40W Input: AC110~220V
SL4012D/SL4024
IJ5056
Outdoor: IPS4184/8S, IPS4204/8S, IPS6224/8S
-10°C ~ + 50°C (14°F ~ 122°F) 802.3at (PoE+)
Indoor: IPS5184/8ES, IPS5204/8ES, IPS7224/8EM
Outdoor: IPS4184/8ES, IPS4204/8ES, IPS6224/8ES
Full HD PoE PTZ Cameras IPS4, 5, 6, and 7 series, PoE+ model available Dual voltage power supplier: 24vac + PoE or full range + PoE model available. When PTZ PoE power is used solely, the heater is disabled.
The operation temperature is -10°C ~ + 50°C (14°F ~ 122°F), if PoE is used. The operation temperature is -40°C ~ + 50°C (-40°F ~ 122°F) if 24vac or full range power is used. If -40°C ~ + 50°C (-40°F ~ 122°F) is a must, use IJ5056 (50W) and SL4012D/SL4024A. Do not use IJ5056 injector to power PoE PTZ. Use IEEE 802.3at or PoE+ switch to power PoE PTZ
No
IJ5056
IPS4, 5, 6, or 7 PoE series
IJ5056 Injector and PoE Splitters IJ5056 is a PoE injector (50W). SL4012D is a PoE splitter (40W) with DC12V output. SL4024A is a PoE splitter (40W) with AC24V output. IJ5056 and SL4012D/SL4024A must use as a pair for
powering DC12V/AC24V (40W) device. Output: DC12V or SL4024A 40W
Input: AC110~220V
OK
IJ5056
SL4012D/SL4024
IJ5056 PoE SL4024A High power injector, IJ5056 (50W) can only support SL4024A or SL4012D for powering devices, not for other LILIN PoE cameras.
No, heater will not run.
PoE/PoE+ PTZ
IJ5056
No
IJ5056
PoE/PoE+ cameras
Elevator Installation.
Coaxial cable 0.6 mm inner conductor Data: 50 Mbps, Power: 13 W with 100 m Data: 50 Mbps, Power: 11 W with 500 m Telephone line/bell wire 0.8 mm with 50 m Data: 50 Mbps, Power: 13 W with 100 m Data: 50 Mbps, Power: 13 W with 200 m Data: 50 Mbps, Cat-7 with 200 m Data: 50 Mbps, Power: 13 W with 300 m Data: 50 Mbps, Power: 13 W with 500 m Data: 45 Mbps, Power: 12 W Warning: Please ask certified elevator installer for installing IP cameras.
Latency of Switches L2 web management switch
100m
100m
100m
100m
100m
NO
OK
Network System Architecture Using Fiber
PMH-716M—Fiber to RJ-45 switch, 16 Combo UTP/SFP ports +2 SFP + 16 Giga RJ-45 ports
CMX can take up to 400Mbps upload and download. Make sure that the core switch is L2 web management switch for managing TCP/IP traffic.
CMX1108
Gigabit network
PMH-EWM16RS
Fiber for gigabit network
L2 web management switch
PMH-POE24390MAT
10/100Mbps network
Keyboards and CMX
RS-485 DVR #1 ~ #255
IP PTZ TCP/IP
PMH-RS485/USB
RS-485 (RJ-11)
RS-485 (RJ-11)
PoE Switch
PMH-POE16260WAT, L2 management switch PMH-POE16260WAT
16 Combo UTP/SFP ports +2 SFP + 16 Giga RJ-45 ports PMH-EWM16RS
10/100/1000BaseT to 1000SX/LX SFP Media Converter PMH-RF-G 24 Port 10/100/1000 PoE Port / 4 combo SFP Rack-Mount Gigabit Ethernet Switch Web-Smart, 250W PMH-24G250W 24 Port 10/100/1000 PoE Port / 4 combo SFP Rack-Mount Gigabit Ethernet Switch Web-Smart, 500W PMH-24G500W
Conclusion
