Transcript
RADIO EQ STACK
TUNERS / CASSETTE / DISC PLAYERS MINI
STAN
DIN
ISO DIN
SINGLE DBL DIN
CHASSIS H
13/4-2
2
2
2
3 7/ 8
3
CHASSIS W
1
7 /8
1
7 /8
1
7 /8
7
7 1/ 8
7 1/ 8
CHASSIS D
43/4-5 1/2
57/8-6 11/16
57/8-6 11/16
57/8-6 11/16
57/8-6 11/16
57/8-6 11/16
NOSE H
15/8-1 3/4
15/8-1 3/4
2 3/ 8
113/16
33/4-4
NOSE W
41/8-4 3/16
41/8-4 3/16
7 1/ 2
611/16
611/16-71/4
SHAFT SP.
1
3
UPDATED THROUGH
2001 2002 2003 2004
1
5 /8-5 /4
5 /8-6
KS
KS
N
N
Sedan
FRONT DOORS Factory Provisions: Standard 6 x 8" Aftermarket: 51/4"KS, 61/2"KS, 6 x 8" KS=SA68
IN DASH APPLICATION NOTES KS
LINCOLN 2000-UP TOWN CAR
N
APPLICATION KIT MODEL: FD1327/FD1300 HARNESS ADAPTOR:
FD16/FDK9*
ANTENNA ADAPTOR:
IN-DASH INSTALLATION AREA DIMENSIONS MAX DEPTH
DEPTH
63/4"
CAVITY DASH OPENING
WIDTH
HEIGHT
5
319 /32 "
7 /32 "
63/4"
73/8"
TYPE: FORD DOUBLE DIN
DASH MATERIAL:
PLASTIC
THICKNESS:
4" 1
/8" CAVITY
REMOVE REAR SUPPORT MODIFY CAVITY
FOR MAX DEPTH
AMPLIFIER/EQ MOUNTING LOCATIONS UNDER/IN DASH
UNDER SEAT
GLOVE BOX 14 x 4 x 61/2"
W 1
H 5
D 1
5 /8 x 7 /8 x 1 /2" (precut in steel) 1 5 5 5 /8 x 7 /8 x 2 /8" (factory adapter) (WxHxD)
TRUNK/ CARGO Various
Dimensions shown are inches. For inch/mm conversions refer to chart section.
REAR DECK - SEDAN Factory Provisions: Standard 6 x 8" Aftermarket: 51/4" KS, 61/2"KS, 6 x 8" KS = SA68 XX1/2
NOTE: THIS MANUAL IS BASED ON CAREFULLY DOCUMENTED RESEARCH. ABSOLUTE ACCURACY IS ATTEMPTED BUT NOT GUARANTEED. USE THIS MANUAL AS A REFERENCE GUIDE. SCOSCHE, INC. CANNOT BE RESPONSIBLE FOR INCONSISTENCIES THAT MAY OCCUR.
* IF EQUIPPED WITH FACTORY SUBWOOFER.
CAVITY
B C1 C2 D D1 D2 D3 F1 F2 K K1 K2 K3 K4
= = = = = = = = = = = = = =
W H D 51/8 x 75/8 x 91/8"
K5 = WHEN EQUIPPED WITH STANDARD TWO SHAFT RADIO/TAPE PLAYER. FABRICATE KIT WHEN EQUIPPED WITH FLAT FACE ELECTRONIC RADIO/TAPE PLAYER. KS = SCOSCHE KIT RECOMMENDED. N = NOT RECOMMENDED. EXTENSIVE MODIFICATION REQUIRED. P = PERFECT WITHOUT MODIFICATION. P1 = MODIFY OR REMOVE POCKETS. P2 = COIN POCKET LOCATION IN DASH (MAY REQUIRE TRIM KIT). P3 = PERFECT WHEN EQUIPPED WITH STANDARD TWO SHAFT RADIO, K WITHOUT. R = REAR LOAD ISOMOUNT. U = UNDERDASH. W1 = WITH POWER WINDOWS ONLY. W2 = WITHOUT POWER WINDOWS ONLY.
BACK UP PLATES REQUIRED. CUT TRIM/PLASTIC (STRUCTURE). CUT STEEL. BELOW DECK ONLY. LIFT PORTION OF DECK. (MAY REQUIRE STRUCTURAL REINFORCEMENT). CUT STEEL WHEN TOP MOUNTED. DO NOT IF BELOW DECK. NARROW SURFACE, BELOW DECK ONLY. MINIMUM MODIFICATION FILE SHAFT HOLES OR DASH OPENING. MODIFY DASH CAVITY AND/OR PANEL. INSTALLATION KIT, SPACER OR ADAPTOR REQUIRED. KIT MODIFICATIONS REQUIRED. EXTENSION KIT RECOMMENDED. WHEN EQUIPPED WITH FACTORY "ELECTRONIC" RADIO. FABRICATE PANEL/BRACKETS.
© 2000 SCOSCHE INDUSTRIES, INC. 107
ALL RIGHTS RESERVED FOR MORE INFORMATION VISIT www.scosche.com OR CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490
2000-UP LINCOLN TOWN CAR SEDAN
FRONT DOOR PANEL.
DASH WITH SCOSCHE'S FD1300 KIT.
PRELIMINARY: DISCONNECT THE NEGATIVE BATTERY CABLE. ANTENNA: THE FACTORY ANTENNA IS LOCATED IN THE REAR WINDOW. RADIO REMOVAL AND IN-DASH INSTALLATION: NOTE: THE FACTORY RADIO PROVISION IS FOR A FORD DOUBLE DIN SIZE RADIO. WHEN INSTALLING AN AFTERMARKET STEREO, A DASH INSTALLATION KIT IS NEEDED. WE RECOMMEND THE SCOSCHE FD1327 OR FD1300 INSTALLATION KIT. 1. INSERT FORD DIN REMOVAL TOOLS TO RELEASE RADIO, PULL OUT STEREO, LIFT AWAY, DISCONNECT AND REMOVE.
FRONT DOOR SPEAKER INSTALLATION: NOTE: THE FACTORY SPEAKER PROVISION IS FOR A 6 X 8" SPEAKER. WHEN INSTALLING AN AFTERMARKET 5 1/4" OR 6 1/2" A SPEAKER ADAPTER IS REQUIRED. WE RECOMMEND THE SCOSCHE SA68. 1. LOCATE HIDDEN SCREWS IN BOTTOM CARPET SECTION OF DOOR PANEL AND EXTRACT (2) PHILLIPS HEAD SCREWS. 2. EXTRACT (2) TORX SCREWS FROM DOOR HANDLE, REMOVE HANDLE AND EXTRACT ANOTHER (2) TORX SCREWS FROM BEHIND. 3. USING A PANEL REMOVAL TOOL, UNSNAP PERIMETER OF DOOR PANEL, LIFT AWAY, DISCONNECT AND REMOVE. 4. EXTRACT (4) 3/16" SCREWS SECURING SPEAKER, LIFT AWAY, DISCONNECT AND REMOVE.
FRONT DOOR 6 X 8" SPEAKER PROVISION.
REAR DECK SPEAKER INSTALLATION: NOTE: THE FACTORY SPEAKER PROVISION IS FOR A 6 X 8" SPEAKER. WHEN INSTALLING AN AFTERMARKET 5 1/4" OR 6 1/2" A SPEAKER ADAPTER IS REQUIRED. WE RECOMMEND THE SCOSCHE SA68. 1. RELEASE LOWER SECTION OF REAR SEAT BY PUSHING DOWN AND THEN FORWARD, LIFT AWAY AND REMOVE. 2. EXTRACT (2) 18MM BOLTS SECURING SEAT BELTS AND UPPER SEAT CUSHION. LIFT AWAY UPPER SEAT CUSHION AND REMOVE. 3. USING A PANEL REMOVAL TOOL, EXTRACT (2) PLASTIC FASTENERS FROM REAR DECK COVER, LIFT AWAY REAR DECK AND REMOVE. 4. EXTRACT (4) PHILLIPS HEAD SCREWS SECURING SPEAKER, LIFT AWAY, DISCONNECT AND REMOVE.
REAR DECK 6 X 8" SPEAKER PROVISION.
© 2000 SCOSCHE INDUSTRIES, INC. 108
ALL RIGHTS RESERVED FOR MORE INFORMATION VISIT www.scosche.com OR CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490
