เครื่องควบคุม และสำรองไฟฟ า ระบบ Line Interactive

Transcript

Your Smart choice for UPS The Highest Trustful Small UPS เครื่องควบคุมและสำรองไฟฟา ระบบ Line interactive สมรรถนะสูง มาตรฐาน CE - มีระบบปรับแรงดันไฟฟาอัตโนมัติ สามารถใชงานไดทั่วประเทศ - ควบคุมการทำงานดวย Microprocessor - ทนทานกวาดวยเทคโนโลยี Full Bridge Inverter LCD display - ชารจแบตเตอรี่เร็วกวาดวยเทคโนโลยี Super Charger - AC mode - Battery mode - สำรองไฟไดนานกวาดวยหมอแปลง Super-Lowloss - Load level - Universal Socket รองรับปลั๊กไฟฟาทุกประเภท - Battery level - ผลิตและออกแบบตามมาตรฐาน มอก. และ CE - ออกแบบใหสามารถเปลี่ยนแบตเตอรี่ไดงาย Battery hot swap *รุน1k ขึ้นไป - ผลิตภัณฑเปนมิตรกับสิ่งแวดลอมตามขอกำหนด RoHS ในยุโรป - Input voltage - Output voltage - Overload - Fault - Low battery The Sun Power Co.,Ltd. 31 Soi Prachautit 59, Yeak 5, Tel. 02-872-9501/4 Fax.02-872-9505 Bangmod,Thungkru, WWW.THESUNPOWER.CO.TH Bangkok 10140 THAILAND. Email. [email protected] คุณสมบัติทางไฟฟา Catacity INPUT Voltage Voltage Range Frequency Range OUTPUT AC Voltage Regulation Frequency (Batt.Mode) Transfer Time Waveform (Batt. Mode) BATTERY Battery Type Typical Recharge Time Backup Time Battery Number INDICATORS Model ATOM-800-LED ATOM-800-LCD ATOM-800i-LED ATOM-800i-LCD ATOM-1000-LCD ATOM-1500-LCD ATOM-2000-LCD 800VA / 320Watt 800VA / 480Watt 1000VA / 600Watt 1500VA / 900Watt 2000VA / 1200Watt ขนาดพิกัด ดานขาเขา แรงดัน ชวงแรงดัน ชวงความถี่ ดานขาออก แรงดัน ความถี่ เวลาโอนยาย รูปคลื่น แบตเตอรี่ ประเภท เวลาประจุ เวลาสำรองไฟฟา จำนวน การแสดงผล 220 VAC 220 VAC +20% -26% 50 Hz ±10% 220VAC ±10% 50Hz ±0.5% Typical 4-8 ms Modif ied-Sinewave 12V5Ah / 12V7Ah / 12V9Ah (Seal Lead Acid Maintenace Free) Recharge Time 6 hours to 90% after complete discharge 15-30 minutes (Depend on load) 1x12V5Ah LCD Display 2x12V7Ah 2x12V9Ah AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Overload, Fault, and Low Battery LED Display Normal / Overload Backup / Low batt. Fault / Replace batt. PROTECTION Full Protection ALARM Battery Mode Low Battery Overload Fault PHYSICAL Outlet (Universel Style) Dimension, DxWxH (mm) Net Weight (kgs) OPERATING ENVIRONMENT Humidity Noise Level MANAMENT & MONITORING Optional USB International Standard CE ไฟฟาปกติ/เกินพิกัด Green solid / blinking จายไฟสำรอง/แบตต่ำ Yellow solid / blinking เครื่องเสีย/เปลี่ยนแบต Red solid / blinking การปองกัน ระบบปองกัน Discharge, Overcharge, and Overload Protection การแจงเตือน จายไฟฟาจากแบตเตอรี่ Sounding every 10 seconds แบตเตอรี่แรงดันต่ำ Sounding every 1 second ใชกำลังไฟเกิน Sounding every 0.5 second เครื่องผิดปกติ Continuously Sounding ดานกายภาพ จำนวนเตาไฟฟา 5 + 1 bypass 3 + 1 bypass 280X100X143 / 290X100X143 (LCD) 364X139X195 ขนาดเครื่อง น้ำหนัก 4.49 / 4.59 (LCD) 4.79 / 4.93 (LCD) 10.40 12.13 12.15 สภาพแวดลอมใชงาน 0-90% RH @ 0-40°C (non-condensing) ความชึ้น Less than 40 dB ระดับเสียงรบกวน ระบบควบคุมตรวจสอบ WinPower Monitoring S/W for Windows Family, Linux, Sun Solaris, IBM AIX, Compaq True64, SGI IRIX, FreeBSD, HP-UX and MAC ทางเลือก มาตรฐานนานาชาติ มาตรฐานยุโรป Low Voltage Directive (Safety):EN62040-1:2008, EMC Directives: IEC62040-2 C2,CISPR 22 Class A ดานหลัง ดานหนา ดานหลัง 9 13 10 14 11 12 1 5 2 6 3 7 4 8 15 สวนประกอบภายนอก 1. 2. 3. 4. 5. 6. 7. 8. Power on/off Battery mode AC mode Fault mode Input cord TEL. line Bypass UPS output 9. 10. 11. 12. 13. 14. 15. USB interface LAN line Input cord Breaker Bypass UPS output FAN grill The Sun Power Co.,Ltd. เอกสารออกครั้งที่ 2 วันที่ 31-5-56 31 Soi Prachautit 59, Yeak 5, Tel. 02-872-9501/4 Fax.02-872-9505 Bangmod,Thungkru, WWW.THESUNPOWER.CO.TH Bangkok 10140 THAILAND. Email. [email protected] Your Smart choice for UPS RADIAN 5 0 0 VA ~ 1 . 5 k VA Radian series of line interactive UPS provides pure sine wave AC output with better harmonic distortion than traditional line interactive UPS in step wave output. Radian series is available for 500VA, 750VA, 1000VA, 1500VA capacity. For data center with Rack mount demand, you can adapt the optional rack kit to install the Radian 1000VA & 1500VA in 19” rack. This series provides you satisfying reliable performance and maximize the flexibility for your system integration. - Microprocessor control - Green power function for energy saving - Equipped with Boost and Buck AVR to stabilize - Auto restart while AC recovery output voltage - Provides Modem/Phone-Line surge protection - High frequency design with high DC-AC efficiency - Provides Discharge, Overcharge and Overload Protection - Pure Sine Wave output - Auto charge even though UPS is off - Built-in DC start function enables UPS to be - Easy battery replacement design (Battery hotswap) started up without AC power supplied - 2 in 1 design Tower & Rack 19” (for 1 & 1.5k) - Build-in dry contact/RS232/USB interface for software communication port Your smart choice for UPS RADIAN SERIES LINE INTERACTIVE SINEWAVE UPS SPECIFICATION MODEL CAPACITY VA/W (PF) RD500 RD750 RD1000 RD1500 500VA/300W (PF 0.6) 750VA/500W (PF 0.66) 1000VA/600W (PF 0.6) 1500VA/900W (PF 0.6) Voltage INPUT 220 VAC Voltage Range 220VAC +/- 25% Frequency Range OUTPUT 50 Hz +/- 10% Voltage 220 VAC Regulation (Normal Mode) +/- 10% Regulation (Battery Mode) +/- 10% +/- 5% Voltage Waveform Pure Sine Wave Frequency (Battery Mode) Normale Mode OVERLOAD CAPACITY TRANSFER TIME EFFICIENCY Boost/Buck Mode Battery Mode 50 Hz +/- 0.1% 110% +/- 8%, fault after 8 minutes; 130%+/-8%, fault after 10 cycles minimum 70% +8%/ - 4%, overload alarming after 25 minutes, fault after 30 minutes 110% +/- 8%, fault after 30 seconds; 120%+/-8%, fault after 5 cycles minimum Typical 2 ms Normal Mode > 95% (Rated full load, battery full charged) Boost/Buck Mode > 90% (Rated full load, battery full charged) Battery Mode Configuration BATTERY & CHARGER INDICATOR AUDIBLE ALARM 12V9Ah x 1 Pcs Type Recharge Time BACKUP TIME > 80% (Rated full load, battery full charged) 12V7Ah x 1 Pcs WEIGHT < 6 hours to 90% < 8 hours to 90% < 6 hours to 90% 12’00” 8’00” 11’00” 10’00” 1 PC Backup Time (Typical) 20’00” 26’00” 35’00” 40’00” LED Display UPS Status / Load Level / Battery Level / Fault - Backup mode Sounding every 10 seconds - Battery low Sounding every 1 seconds - Overload Sounding every 0.5 seconds - Over charge Sounding every 1.5 seconds - Over temperature Sounding every 2.5 seconds - Battery replacement Sounding every 3 seconds - Charger fail Sounding every 5 seconds LxWxH Weight Raletive Humidity Audible Noise @1 meter CERTIFICATES < 8 hours to 90% 50% load Backup Time Continuous sounding 323x96x234.6 mm 5.6 kg CE 390x86x328 mm 6 kg 9.8 kg o Operation Temperature ENVIRONMENT 12V9Ah x 2 Pcs Sealed Lead Acid Maintenance-free - Fault DIMENSIONS 12V7Ah x 2 Pcs 10.2 kg o 0 C to + 40 C 0 to 90% Relative Humidity (Non-condensing) < 40 dBA < 45 dBA Safety Conformance: EN62040-1-1 EMC: EN62040-2 C2, EN62040-2, EN61000-3-2 The Sun Power Co.,Ltd. 31 Soi Prachautit 59, Yeak 5, Tel. 02-872-9501/4 Fax.02-872-9505 Bangmod,Thungkru, WWW.THESUNPOWER.CO.TH Bangkok 10140 THAILAND. Email. [email protected] Your Smart Choice for UPS 750 • • • • • • Microprocessor control guarantees high reliability Built-in Boost and Buck AVR to stabilize the Output Voltage Pure Sine Wave Output High Frequency design with higher power density Green Power function to save the battery capacity with no load Extendable backup time with External battery Cabinet • Seal Lead Acid Maintenance Free Battery type • User Selectable Output Voltage • User Selectable Line Sensitive • Two In One Design, Tower & 19" Rack Mount • The separated UPS and EBM design for 1.5 & 2Kva is available for different installation environment • Smart RS-232 / USB / Dry-Contact Communication Port • Free download software from the internet to monitor UPS status • "Easy-to-read status indicators and easy-to-use controls with audible" alarms for critical warnings • Overload, Short-Circuit, and Overheat Protection • Hot Swappable / User-Replaceable battery design • Intelligent slot allows remote monitoring, start-up or restart for connected equipment Your Smart Choice for UPS CLAIRE SERIES LINE INTERACTIVE SINEWAVE UPS SPECIFICATION MODEL INPUT OUTPUT Overload Rating TRANSFER TIME BATTERY Battery INDICATORS AUDIBLE ALARM PHYSICAL ENVIRONMENT INTERFACE Claire 750 0/1000 Claire 1500/2000 Claire 3000 VA/W 750VA/375W;1000VA/700W 1500VA/900W ; 2000VA/1200W 3000VA/2100W Voltage 220 +/- 20 % Frequency Range 50 Hz ±5Hz for Normal Mode; >40Hz for Generator Mode Surge Rating ( LV/HV ) 320 / 230 Joules 430 / 250 Joules 500 / 640 Joules Voltage 220 +/- 10% Voltage Regulation (Batt. Mode) 220 ±5% RMS for entire battery voltage range Frequency 50Hz Frequency Regulation (Batt. Mode) ±0.1% Waveform Pure Sinewave Redundancy (Option) Hot Standby With STS technology (2 units Max) Line Mode 110% -0%, +8%; shutdown after 3 minutes. 150% -0%, +10%; shutdown after 10 cycles Battery Mode 110% ± 6%; shutdown after 30 seconds. 120 % ± 6 %; Shutdown after 5 cycles Typical 2 ms Battery Type* 12V/7AH ; 12V/9Ah 12V/7AH ; 12V/9Ah 12V/5Ah Battery Number 2 pcs 4 pcs 8 pcs Backup Time (depends on computer load) 15-30 minutes Battery hot swap YES Battery Protection Battery Overcharges/Battery deep discharge/Auto self test/Fan failure protection Recharge Time 4 hours to 90% 3 hours to 90% after discharged AC Mode Line LED lighting Backup Mode Battery LED flashing every 4 seconds Site Fault Site Fault LED lighting ( For 120Vac Models) 4-segment LED bar0-25% : 4th LED lighting 26%-50% : 3rd and 4th LEDs lighting Load/Battery Level 51%-75% : 2nd, 3rd, and 4th LEDs lighting 76%-100% : 4 LEDs in a row all lighting UPS Fault Fault LED Lighting Overload OverLoad LED lighting Low Battery Battery LED flashing every second Backup Mode Sounding every 4 seconds Low Battery Sounding every second UPS Fault Continuously Sounding Overload Sounding every second Battery Replacement Sounding every second 217*86.5*413.5 438*86.2*582 235*86.2*383 Dimension (WxHxD) mm UPS Case 6.5 31.5 8.6 ; 9.6 Net weight (kgs) 438*86.2*582 N/A 217*86.5*413.5 Battery Case Dimension (WxHxD) mm N/A 40.3 Net weight (kgs) 12 Operating Environment 0- 40±C, 0-90 % relative humidity (non-condensing) Noise Level Less than 45dB RS-232 Support Windows family, Linux and Mac YES YES YES Dry-Contact YES YES YES USB N/A Optional Optional SNMP N/A YES YES EPO The Sun Power Co.,Ltd. 31 Soi Prachautit 59, Yeak 5 Bangmod,Thungkru, Bangkok 10140 THAILAND. Tel. 02-872-9501/4 Fax.02-872-9505 WWW.THESUNPOWER.CO.TH Email. [email protected] Your Smart choice for UPS TE1000 TE2000/TE3000 Titan EliteE True Online Double Conversion Design Pure P Sine Wave The New Ne series is designed for the best cost effective performance. performance. With appropriate quantity ity of batteries and output PF 0.8., The New Titan Elite offers offe ers competitive cost but w with reliable performance to meet the entry level on line UPS S demand. external With W long backup time models are allowed to connect externa al batteries to get prolonged prolo onged backup time. The New Titan Elite adopts the 4A super supe er charger board, and battery the ba attery recharging time is now able to be shortened and keep keep in ready status for the nex ext power shortage. next Features: Featur res: True Online Double Conversion Designed DSP design enables precise and reliable control High efficiency results in energy saving Output Outpu ut power factor 0.8 AC input range (115-300VAC) Wide A Automatic tic switching between 50/60Hz system LCD & LED display d Supports AC generator Supports DC start-up and auto restart Supports USB/SNMP/RS485/AS400 USB/SNMP/RS485/AS400 communication communicatio on card Power Manag gement S/W WinPower Management The Sun Power Co.,Lt Co.,Ltd. td. 31 Soi Prachautit 59, Yeak 5, Tel. 02-872-9501/4 Fax.02-872-9505 Bangmod,Thungkru, WWW.THESUNPOWER.CO.TH Bangkok 10140 THAILAND. Email. [email protected] Model Capacity TE1000 TE1000S TE2000 TE2000S TE3000 TE3000S 1000VA/800W 1000VA/800W 2000VA/1600W 2000VA/1600W 3000VA/2400W 3000VA/2400W Input Voltage range 115-300VAC Phase Single phase with ground THDi <10% Power Factor ≥ 0.98 @ R full load Frequency Range 40-70Hz Generator Set 2.2 x UPS Rating Power Output Waveform Pure sine wave Nominal voltage 200 / 208 / 220 / 230 / 240VAC Voltage regulation ±1 % Voltage distortion < 3% @linear load < 3% @non-linear load Frequency (synchronized range) Frequency (battery mode) 46-54Hz / 56-64Hz 50±.05Hz / 60±.05Hz 105%-150% : 60s 150%-200% : 25s~300ms >200% : 200ms Overload Capability Load Crest Ratio 3:1 Transfer Time Normal Mode 0ms Line mode >89% Battery mode >83% >90% >90% >83% >85% >83% >85% Battery Sealed-Lead Acid Maintenance Free Type Voltage/Capacity 12V/7Ah,9Ah Number of Battery 2 Backup Time (depend on load) >15 min Depends on the capacity of external batteries 12V/7Ah,9Ah 4 >15 min Depends on the capacity of external batteries 12V/7Ah,9Ah 6 >15 min Depends on the capacity of external batteries Charger Charging voltage Charging current (max) Charging time 27-27.6V 40.5-41.4V 54-55.2V 81-82.8V 81-82.2V 108-110.4V 1.0A 6.0A 1.0A 6.0A 1.0A 6.0A <7hr to 90% Depend on the capacity <7hr to 90% Depend on the capacity <7hr to 90% Depend on the capacity Indicator & Alarm Display LCD&LED LCD Input(Volt/Freq), Output(Volt/Freq), Load (Level/Percentage), Battery (Voltage/Level/Percentage),Warning/Fault Code Line LED, Inverter LED, Bypass LED, Battery LED LED Audible Alarm Battery mode/Battery low/Overload/Fault Interface RS232 Standard Intelligent Slot USB/SNMP/RS485/AS400 Card Dimension & Weight WxDxH(mm) Net Weight 144x345x229 9.2 190x393x328 4.2 17.2 190x393x328 7.9 22.6 8.3 Environment Operating Temperature Range Audible Noise CE Declaration *Specification are subject to change without prior notice 0° ~ 40 ° <45dB Low Voltage Directive(Safety): EN62040-1:2008(1st edition) EMC Directive: EN62040-2:2006 (EN61000-3-2:2006+A1:2009+A2:2009,EN61000-4-2:2009, EN61000-4-3:2006+A1:2008+A2:2010, EN61000-4-4:2012,EN61000-4-5:2006,EN61000-4-6:2014,EN61000-4-8:2010,EN61000-4-11:2004,EN61000-2-2:2002) Titan Elite Series TE2000,TE3000 Features Your Smart choice for UPS TE1000 TE2000S, TE3000S TE1000S - True online double-conversion design - DSP Control - 0.9 Output Power Factor - Wide Input Range 100-300 VAC - High Efficiency 97% (ECO mode) - Frequency Converter Mode - Input THDI < 5% - Output THDv < 2% linear load - Programmable LCD display - Extendable Run Time - Recharge to 90% battery capacity within 4 hours - Free Power Manangement Software - Optional SNMP & Relay Cards - Optional Over Voltage Cut-Off device (OVCD) for Tough environment The New Titan Elite genertion 2 series. A premium grade entry level for true-online UPS. TE-G2 Series UPS make use of the unique True Online Double Conversion circuitry to detect the electricity current and voltage output of utility power supply. The current is input via high frequency PWM to maintain uniform wave form and phase in line with the voltage, so as to attain high input power factor over to 0.99 and avoid generating comparatively significant harmonic interference on the power network. With the use of the outstanding IGBT as the power convertion component, the operating frequency of the Inverter of UPS is capable of reaching tens of KHz, due to the high frequency operating characteristics of IGBT. Higher working efficiency of the inverter also improves the overall efficiency of UPS and higher inversion frequency reduces the noise of the inverter as well. Due to its components margins are increased. Titan Elite Series Product Information MODEL CAPACITY TE1000 VA/WATT TE1000S 1000VA/900W (PF0.9) TE2000 50 Hz ± 10% (Auto sensing) Phase Single phase with ground Current THDI <5% Power Factor >= 0.99 Generator Input 2.2 x UPS Rating Power Voltage Range 220 VAC ± 1% Single phase with ground Frequency (Synchonized Range) 50 Hz ± 10% Frequency (Battery Mode) 50 Hz ± 0.1% Current Crest Ratio 3:1 Harmonic Distortion < 2% THD ( Linear Load) Short Circuit Protection Output Waform Pure Sinewave Outlet Thai-Universal 1 min @ 105%~130% ; 10 sec @ 130% ~ 150% ; 300ms @ >150% Line Mode Overload Capacity Battery Mode 1 sec @ 105%~130% ; 1 sec @ 130% ~ 150% ; 300ms @ >150% AC Mode / Battery Mode > 89% / >84% > 91% / >85% > 97.2% > 98% ECO mode Number of Batteries Per Set Battery Capacity (Ahr) BATTERY 2 Depending on the capacity of external batteries 12V/(7/9)Ahr Backup Time (depend on load) >15 min Recharge Time (to 90%) 4 Hours Charging Current (Max.) 1.5A 6.0A 4 Depending on the capacity of external batteries 12V/(7/9)Ahr >15 min 4 Hours 1.5A 24 Vdc Rated Battery Voltage kg Sounding twice every second Continuously Sounding 144 x 229 x 345 102 x 228 x 352 190 x 330 x 393 102 x 327 x 396 190 x 330 x 393 102 x 327 x 396 9.4 3.76 17 6 22.2 6.08 0-40° C Relative Humidity Noise Level USB (built-in) / RS-232 INTERFACE Smart Slot (Option) INTERNATIONAL CE STANDARDS 72 Vdc Sounding every second Operating Environment ENVIRONMENT 6.0A Sounding every 4 seconds Fault WEIGHT 1.5A Input information: Voltage / Frequency / Utility Present / Utility Lost, Output information: Voltage / Frequency, Load information: Overload / Short circuit / Load level,Battery infomation: Battery Level / Battery Remaining Time / Battery Low, Mode information: Bypass / Line / Battery /Fault / Warning / Operating-Fault-Warning Code / Operating Mode Icon / Bypass configure: enable-disable Overload W x H x D mm 4 Hours Zero Low Battery DIMENSION >15 min Sealed Lead Acid Maintenance Free Battery Mode AUDIBLE ALARM Depending on the capacity of external batteries 12V/(7/9)Ahr 6.0A TRANSFER TIME AC to DC LCD 6 48 Vdc Battery Type INDICATOR 3000VA/2700W (PF0.9) Frequency Range Protection EFFICIENCY TE3000S 100 - 300 VAC Phase OUTPUT TE3000 2000VA/1800W (PF0.9) Voltage Range INPUT TE2000S 0-95% (NON-CONDENSING) <45dB @ 1 Meter <50dB @ 1 Meter Software supports Windows Family, Linux, Sun Solaris, IBM AIX, Compaq True64, SGI IRIX, FressBSD, HP-UX and MAC SNMP Adapter/ AS400 Relay Card / RS485 / USB ESD: IEC61000-4-2 Level 3, RS:IEC61000-4-3 Level 3, EFT:IEC61000-4-4 Level4, Surge:IEC61000-4-5 Level 4, Conduction:IEC62040-2 Cat C2, Radiation:IEC62040-2 Cat C2 Transportaion: Drop:ISTA 2A, Vibration:internal standard, Protection: IP20 (static) Specification are subject to change without prior notice. The Sun Power Co.,Ltd. 31 Soi Prachautit 59, Yeak 5, Tel. 02-872-9501/4 Fax.02-872-9505 Bangmod,Thungkru, WWW.THESUNPOWER.CO.TH Bangkok 10140 THAILAND. Email. [email protected] Your Smart choice for UPS Hercules Series Features - DSP Control - 0.8 Output Power Factor - Wide Input Range - High Efficiency Mode (ECO) - Frequency Converter Mode - Input THDI < 5% - Output THDv < 3% - Auto Self-Testing System - Extendable Run Time - Fan Speed Control - Free Power Manangement Software - Multiple Communication Port HE2000, HE3000 - Optional SNMP & Relay Cards - Wide operating environment 0-45 celsious - Optional Over Voltage Cut-Off device (OVCD) for Tough environment HE1000 Trendy & Elegant LCD Design for real-time UPS system information Input Information Output Information Battery Information Load Information Mode / Fault / Warning / Code Information Output frequency / voltage & Bypass enable/disable Selection Information Hercules series, built for the most reliability, purity and power Hercules Series UPS make use of the unique True Online Double Conversion circuitry to detect the electricity current and voltage output of utility power supply. The current is input via high frequency PWM to maintain uniform wave form and phase in line with the voltage, so as to attain high input power factor over to 0.99 and avoid generating comparatively significant harmonic interference on the power network. With the use of the outstanding IGBT as the power convertion component, the operating frequency of the Inverter of UPS is capable of reaching tens of KHz, due to the high frequency operating characteristics of IGBT. Higher working efficiency of the inverter also improves the overall efficiency of UPS and higher inversion frequency reduces the noise of the inverter as well. Due to its components margins are increased, Hercules is suitable for higher temperature environment up to 45 celsious. Hercules Series Product Information MODEL CAPACITY HE1000 VA/WATT HE1000S 1000VA/800W (PF0.8) HE2000 HE2000S HE3000 2000VA/1600W (PF0.8) HE3000S 3000VA/2400W (PF0.8) 110 (±3%) - 300 (±3%) VAC Voltage Range Frequency Range 50 Hz ± 10% (Auto sensing) Phase Single phase with ground INPUT Current THDI <5% Power Factor ≧0.99 Generator Input 1.5 x UPS Rating Power Voltage Range 220 VAC ± 1% Phase OUTPUT Single phase with ground Frequency (Synchonized Range) 50 Hz ± 10% Frequency (Battery Mode) 50 Hz ± 0.1% Current Crest Ratio 3:1 Harmonic Distortion < 3% THD ( Linear Load) Protection Short Circuit Protection Output Waform Pure Sinewave NEMA Outlet Line Mode Overload Capacity Battery Mode 1 min @ 105%~110% ; 30 sec @ 110% ~ 125% ; 10 sec @ 125%~ 150% ; 1 sec @ > 150% 1 min @ 105%~110% ; 20 sec @ 110% ~ 125% ; 8 sec @ 125%~ 150% ; 1 sec @ > 150% AC Mode / Battery Mode > 87% / >84% > 88% / >85% EFFICIENCY ECO mode Number of Batteries Per Set Battery Capacity (Ahr) BATTERY > 95% 3 12V/(7/9)Ahr Backup Time (depend on load) >15 min Recharge Time (to 90%) 5 Hours Charging Current (Max.) 1.0A Rated Battery Voltage Depending on the capacity of external batteries 8 12V/(7/9)Ahr >15 min 5 Hours 4.0/8.0A 1.0A WEIGHT Sounding every 4 seconds Sounding every second Overload kg Sounding twice every second Continuously Sounding 145 x 220 x 400 14 7 ex.bat Operating Environment ENVIRONMENT USB (built-in) / RS-232 192 x 347 x 460 34.5 15 ex.bat 35.5 16 ex.bat 0-45° C Relative Humidity Noise Level 4.0/8.0A Input information: Voltage / Frequency / High Voltage / Low Voltage / Utility Present / Utility Lost, Output information: Voltage / Frequency / Utilty Present / UtilityLost, Load information: %Watt / % VA / Overload / Short circuit / Load level, Battery infomation: Voltage / Battery Level / Low / Over charging / Discharging, Mode information: Bypass / Line / Battery /Fault / Warning / Operating-Fault-Warning Code / Operating Mode Icon / Bypass configure: enable-disable Low Battery W x H x D mm 1.0A Zero Fault DIMENSION 5 Hours Sealed Lead Acid Maintenance Fee Battery Mode AUDIBLE ALARM >15 min Depending on the capacity of external batteries 110 Vdc ± 0.4V TRANSFER TIME AC to DC LCD 12V/(7/9)Ahr 4.0/8.0A 41.1 Vdc ± 0.6V Battery Type INDICATOR 8 Depending on the capacity of external batteries 0-90% (NON-CONDENSING) <45dB @ 1 Meter <50dB @ 1 Meter Software supports Windows Family, Linux, Sun Solaris, IBM AIX, Compaq True64, SGI IRIX, FressBSD, HP-UX and MAC INTERFACE Smart Slot (Option) INTERNATIONAL CE STANDARDS SNMP Adapter/ AS400 Relay Card / RS485 / USB Low Voltage Directive (Safety): EN62040-1-1 EMC Directive: EN62040-2, EN61000-2-2, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8 Specification are subject to change without prior notice. The Sun Power Co.,Ltd. 31 Soi Prachautit 59, Yeak 5, Tel. 02-872-9501/4 Fax.02-872-9505 Bangmod,Thungkru, WWW.THESUNPOWER.CO.TH Bangkok 10140 THAILAND. Email. [email protected] Hercules Tower Series HIGH PERFORMANCE TRUE DOUBLE CONVERSION ONLINE UPS Your Smart choice for UPS Trendy & Elegant LCD & LED Design for real-time UPS system information Features - DSP Control - 0.9 Output Power Factor - Wide Input Range - High Efficiency Mode (ECO) - Frequency Converter Mode - Input THDI < 5% - Output THDv < 2% - Output Voltage Regulation <1% - N+X Parallel Redundancy - Dot Matrix LCD Display - Maintenace bypass switch - Battery Remaining Time Display - Extendable Run Time - Fan Speed Control - Multiple Communication Port Simultaneously - Over Voltage Cut-Off device (OVCD) for Tough environment - Emergency Power Off (EPO) - Short Circuit Clearance with current limit - Optional SNMP & Relay Cards - Free Power Manangement Software for Standalone LAN & WAN Hercules series, built for the most reliability, purity and power Hercules Series UPS make use of the unique True Online Double Conversion circuitry to detect the electricity current and voltage output of utility power supply. The current is input via high frequency PWM to maintain uniform wave form and phase in line with the voltage, so as to attain high input power factor over to 0.99 and avoid generating comparatively significant harmonic interference on the power network. With the use of the outstanding IGBT as the power convertion component, the operating frequency of the Inverter of UPS is capable of reaching tens of KHz, due to the high frequency operating characteristics of IGBT. Higher working efficiency of the inverter also improves the overall efficiency of UPS and higher inversion frequency reduces the noise of the inverter as well. MODEL CAPACITY HE6k VA/WATT HE6kS 6000VA/5400W (PF0.9) Phase Current THDI <5% Power Factor ≧0.99 Generator Input 1.5 x UPS Rating Power Voltage Range 208VAC/220VAC/230VAC/240VAC (± 1%) Single phase with ground Frequency (Synchonized Range) 45-55Hz/54-66Hz Frequency (Battery Mode) 50/60Hz ± 0.05Hz Current Crest Ratio 3:1 Harmonic Distortion <= 2% THD ( Linear Load) Protection Short Circuit Protection Output Waform Pure Sinewave Outlet Terminal Block Line Mode Overload Capacity Battery Mode 2 min @ 105%~125% ; 30 sec @ 125% ~ 150% ; 1 sec @ > 150% AC Mode / Battery Mode Battery Capacity (Ahr) BATTERY > 92% / >92 % ECO mode Number of Batteries Per Set > 96% 20 12V/(7/9)Ahr Backup Time (depend on load) >15 min Recharge Time (to 90%) 5 Hours Charging Current (Max.) 1.2A Depending on the capacity of external batteries Max 4 (Load Sharing) For LED: Bypass mode,UPS on,Line mode,Battery Mode, HE mode,Battery test mode,Fault mode,Waring mode For LCD: Input/Output Voltage&Frequency, Load level,Load Watt,Battery Voltage,Battery status,Converter mode, Battery Remaining Time, UPS status, Fault indicator, etc. Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault W x H x D mm WEIGHT kg Continuously Sounding 260 x 708 x 550 86 Relative Humidity Noise Level USB (built-in) / RS-232 INTERFACE Smart Slot (Option) INTERNATIONAL CE STANDARDS 92 34 ex.bat Operating Environment ENVIRONMENT 4.0A Zero N+X Parallel Redundancy DIMENSION 5 Hours Sealed Lead Acid Maintenance Free Battery Mode AUDIBLE ALARM >15 min Depending on the capacity of external batteries 1.2A TRANSFER TIME AC to DC LCD & LED 12V/(7/9)Ahr 240 Vdc Battery Type INDICATOR 20 4.0A Rated Battery Voltage Parallel Parall Single phase with ground Phase EFFICIENCY 10000VA/9000W (PF0.9) 45-55Hz / 54-66Hz Frequency Range OUTPUT HE10kS 110 - 276 VAC Voltage Range INPUT HE10k N+X cy Product Information d an Hercules Tower Series ed e l R un 37 ex.bat 0-40° C 0-95% (NON-CONDENSING) <50dB @ 1 Meter <55dB @ 1 Meter Software supports Windows Family, Linux, Sun Solaris, IBM AIX, Compaq True64, SGI IRIX, FressBSD, HP-UX and MAC SNMP Adapter/ AS400 Relay Card / RS485 / USB Safety (IEC62040-1-1), ESD (IEC61000-4-2 L4),RS (IEC61000-4-3 L3),EFT (IEC61000-4-4 L4), Surge (IEC61000-4-5 L4), Conduction (IED 62040-2 C3), Radiation (IEC62040-2 C3), Transportation (ETS300019-2-2 Class 2.3), Protection (IP20 static) Specification are subject to change without prior notice. The Sun Power Co.,Ltd. 31 Soi Prachautit 59, Yeak 5, Tel. 02-872-9501/4 Fax.02-872-9505 Bangmod,Thungkru, WWW.THESUNPOWER.CO.TH Bangkok 10140 THAILAND. Email. [email protected] Hercules Combo Series HIGH PERFORMANCE TRUE DOUBLE CONVERSION ONLINE UPS Features With Dual input (3 phase or 1 phase) Your Smart choice for UPS Trendy & Elegant LCD & LED Design for real-time UPS system information - DSP Control - 0.9 Output Power Factor - Wide Input Range - High Efficiency Mode (ECO) - Frequency Converter Mode - Input THDI < 5% - Output THDv < 2% - Different source for Bypass - Dual input (3 phase or 1 phase auto detection) - Feedback protection - Output Voltage Regulation <1% - N+X Parallel Redundancy - Dot Matrix LCD Display - Battery Remaining Time Display - Extendable Run Time - Fan Speed Control - Multiple Communication Port Simultaneously - Emergency Power Off (EPO) - Short Circuit Clearance with current limit - Optional SNMP & Relay Cards - Free Power Manangement Software Rear Panel: 1. USB Port 2. RS232 Port 3. EPO 4. AS400 Slot 5. Fan 6. Back Feed Connector 7. Input Breaker 8. Neutral Switch 9. Parallel Port (Optional) 10. Intelligent Slot 11. Maintenance Switch 12. Terminal Block (Input/Output/Batery) 1 1 2 3 2 3 4 4 9 9 10 10 5 6 11 7 8 12 HE-Combo10k HE-Combo20k Hercules Combo series, built for the most reliability, purity and power Hercules Combo Series UPS make use of the unique True Online Double Conversion circuitry to detect the electricity current and voltage output of utility power supply. The current is input via high frequency PWM to maintain uniform wave form and phase in line with the voltage, so as to attain high input power factor over to 0.99 and avoid generating comparatively significant harmonic interference on the power network. With the use of the outstanding IGBT as the power convertion component, the operating frequency of the Inverter of UPS is capable of reaching tens of KHz, due to the high frequency operating characteristics of IGBT. Higher working efficiency of the inverter also improves the overall efficiency of UPS and higher inversion frequency reduces the noise of the inverter as well. Excellent unique design for dual input utility (3 phase or 1 phase auto detection), the best for your utility choices of flexible. MODEL CAPACITY VA/WATT Voltage Range HE-Combo10k HE-Combo20k 10kVA/9kW (PF0.9) 20kVA/18kW (PF0.9) Phase 45-55Hz / 54-66Hz Three Phase with ground or Single phase with ground Current THDI <5% Power Factor ≧0.99 Generator Input 1.5 x UPS Rating Power Voltage Range 208VAC/220VAC/230VAC/240VAC (± 1%) Single phase with ground Phase OUTPUT Frequency (Synchonized Range) 45-55Hz/54-66Hz Frequency (Battery Mode) 50/60Hz ± 0.05Hz Current Crest Ratio 3:1 Harmonic Distortion <= 2% THD ( Linear Load) Protection Short Circuit Protection Output Waform Pure Sinewave Outlet Terminal Block Line Mode Overload Capacity Battery Mode 5 min @ 100%~110% ; 1 min @ 110% ~ 130% ; 10s @ 130% ~ 150% ; 2 sec @ > 150% AC Mode / Battery Mode EFFICIENCY > 93% / > 93% ECO mode > 97% Number of Batteries Per Set 24 12V/(7/9)Ahr Battery Capacity (Ahr) BATTERY Backup Time (depend on load) >15 min Recharge Time (to 90%) 3 Hours Charging Current (Max.) 2.0A, 4.0A (Expandable to 8.0A) Rated Battery Voltage 288 Vdc Battery Type Sealed Lead Acid Maintenance Free TRANSFER TIME AC to DC Parallel INDICATOR Zero N+X Parallel Redundancy LCD & LED Max 4 (Load Sharing) For LED: Bypass mode,UPS on,Line mode,Battery Mode, HE mode,Battery test mode,Fault mode,Waring mode For LCD: Input/Output Voltage&Frequency, Load level,Load Watt,Battery Voltage,Battery status,Converter mode, Battery Remaining Time, UPS status, Fault indicator, etc. Battery Mode AUDIBLE ALARM Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault DIMENSION W x H x D mm WEIGHT kg Operating Environment ENVIRONMENT Relative Humidity Noise Level USB (built-in) / RS-232 INTERFACE Smart Slot (Option) INTERNATIONAL CE STANDARDS Parall 110 - 276 VAC for 1 phase input, 190-478VAC for 3 phase input Frequency Range INPUT N+X cy Product Information d an Hercules Combo Series ed e l R un Continuously Sounding 350 x 890 x 650 62 ex.bat 58 ex.bat 0-45° C 0-95% (NON-CONDENSING) <55dB @ 1 Meter Software supports Windows Family, Linux, Sun Solaris, IBM AIX, Compaq True64, SGI IRIX, FressBSD, HP-UX and MAC SNMP Adapter/ AS400 Relay Card / RS485 / USB Safety (IEC/EN62040-1-1), ESD (IEC/EN61000-4-2 L4),RS (IEC/EN61000-4-3 L3),EFT (IEC/EN61000-4-4 L4), Surge (IEC/EN61000-4-5 L4), Conduction (IEC/EN62040-2 C3), Radiation (IEC/EN62040-2 C3), Transportation (ETS300019-2-2 Class 2.3), Protection (IP20 static) Specification are subject to change without prior notice. The Sun Power Co.,Ltd. 31 Soi Prachautit 59, Yeak 5, Tel. 02-872-9501/4 Fax.02-872-9505 Bangmod,Thungkru, WWW.THESUNPOWER.CO.TH Bangkok 10140 THAILAND. Email. [email protected] Hercules - RT Series Your Smart choice for UPS High Power Density Rack-Tower 2-IN-1 True Online Double Conversion UPS 1kVA-10kVA Features - DSP Control - 0.9 Output Power Factor - Wide Input Range - High Efficiency Mode (ECO) - Frequency Converter Mode - Input THDI < 5% - Output THDv < 2% - Output Voltage Regulation < 1% - Auto Self-Testing System - Extendable Run Time - Fan Speed Control - Different source for Bypass (for 6-10kVA) - Output load segments shutdown setup - Free Power Manangement Software - Multiple Communication Port - Optional SNMP & Relay Cards - Temperature Compensation - N+X Parallel Redundancy (for 6-10kVA) HE-RT 1-3kVA N+X cy Parall d an ed e l R un HE-RT 6-10kVA Hercules-RT series, built for the most reliability, purity and power Hercules Series UPS make use of the unique True Online Double Conversion circuitry to detect the electricity current and voltage output of utility power supply. The current is input via high frequency PWM to maintain uniform wave form and phase in line with the voltage, so as to attain high input power factor over to 0.99 and avoid generating comparatively significant harmonic interference on the power network. With the use of the outstanding IGBT as the power convertion component, the operating frequency of the Inverter of UPS is capable of reaching tens of KHz, due to the high frequency operating characteristics of IGBT. Higher working efficiency of the inverter also improves the overall efficiency of UPS and higher inversion frequency reduces the noise of the inverter as well. Hercules RT Series HE-RT1k MODEL CAPACITY HE-RT1kS 1kVA/900W (PF0.9) VA/WATT HE-RT2k HE-RT2kS 2kVA/1.8kW (PF0.9) Frequency Range Phase <5% Power Factor ≧0.99 Generator Input 1.5 x UPS Rating Power Voltage Range 208/220/230/240 VAC ± 1% 50/60 Hz ± 10% Frequency (Battery Mode) 50/60 Hz ± 0.1% Current Crest Ratio 3:1 Harmonic Distortion < 2% THD ( Linear Load) Pure Sinewave NEMA x 8 IEC + TERMINAL Line Mode 2min@102%-130%; 30s@130%-150%;100ms@>150% 12s@102%-130%; 1.5s@130%-150%;100ms@>150% 10s@102%-130%; 100ms@>130% BAT Mode AC-AC Mode > 88% Battery Mode > 83% Number of Batteries Per Set > 89% > 92% > 92% > 93% > 83% > 86% > 89% > 90% > 96% > 97% > 95% ECO mode 4 6 Depending Depending on the on the 12V/(7/9)Ahr 12V/(7/9)Ahr 12V/(7/9)Ahr Battery Capacity (Ahr) capacity capacity >15 min Backup Time (depend on load) >15 min of external >15 min of external batteries batteries Recharge Time (to 90%) 3 Hours 3 Hours 3 Hours Charging Current (Max.) 3 1.5A 6.0A 6.0A 1.5A Battery Type Parallel N+X Parallel Redundancy INDICATOR LCD * Not available in 1-3kVA model N/A Input information: Voltage / Frequency , Output information: Voltage / Frequency, Load information: *Watt / *VA / *Current / Load Level(%), Battery infomation: Voltage / Battery Level (%) UPS information: *Temperature / Bypass mode / Line mode / Battery mode /Fault / Warning / *Running Time / *Event log, etc. Sounding every 4 seconds Sounding every second Sounding twice every second Fault kg Continuously Sounding 438 x 86.5 x 435 (2U) 16.2 8.4 19.7 USB (built-in) / RS-232 Smart Slot (Option) INTERNATIONAL CE STANDARDS 9.3 27.8 438 x 129 x 698 (3U) 13 438 x 215.5 x 704 (5U) 82.5 46 0-95% (NON-CONDENSING) Relative Humidity INTERFACE 438 x 86.5 x 605 (2U) 0-40° C Operating Environment Noise Level 8.0A 1.7A Max 2 (Load Sharing) Overload WEIGHT 6.0A Zero Low Battery W x H x D mm 1.0A 6.0A Sealed Leads Acid Maintenance Free Battery Mode DIMENSION 15 20 Depending Depending Depending on the on the 12V/(5)Ahr 12V/(7/9)Ahr on the capacity capacity capacity >15 min of external of external >15 min of external batteries batteries batteries 3 Hours 3 Hours 1.5A TRANSFER TIME AC to DC ENVIRONMENT 10kVA/9kW (PF0.9) Short Circuit Protection Outlet with load segments AUDIBLE ALARM 6kVA/5.4kW (PF0.9) Single phase with ground Frequency (Synchonized Range) Output Waveform BATTERY HE-RT6kS HE-RT10k HE-RT10kS Single phase with ground Protection EFFICIENCY 3kVA/2.7kW (PF0.9) Current THDI Overload Capacity HE-RT6k 50/60 Hz ± 10% (Auto sensing) Phase OUTPUT HE-RT3kS 120 - 276 VAC Voltage Range INPUT HE-RT3k <45dB @ 1 Meter <50dB @ 1 Meter <55dB @ 1 Meter Software supports Windows Family, Linux, Sun Solaris, IBM AIX, Compaq True64, SGI IRIX, FressBSD, HP-UX and MAC SNMP Adapter/ AS400 Relay Card / RS485 / USB Safety (IEC/EN62040-1-1), ESD (IEC/EN61000-4-2 L4),RS (IEC/EN61000-4-3 L3),EFT (IEC/EN61000-4-4 L4), Surge (IEC/EN61000-4-5 L4), Conduction (IEC/EN62040-2 C3), Radiation (IEC/EN62040-2 C3), Transportation (ETS300019-2-2 Class 2.3), Protection (IP20 static) Specification are subject to change without prior notice. The Sun Power Co.,Ltd. 31 Soi Prachautit 59, Yeak 5, Tel. 02-872-9501/4 Fax.02-872-9505 Bangmod,Thungkru, WWW.THESUNPOWER.CO.TH Bangkok 10140 THAILAND. Email. [email protected] Your smart choice for UPS Uninterruptible Power Systems True On-Line Double Conversion Technology DSP Controlled IGBT Rectifier UPS 3 phase in / 3 phase out 10 to 200 kVA • DSP basis numerical control • Active Power Factor Correction (0.99) • Active Harmonic Correction (≤ 4%) • Wide Input Voltage Range • Generator Compatible Operation TESID Innovation and Creativity Reward 2005 Evolution and redundancy guaranteed by Parallel Systems • Smart Battery Charge System • Synchronization Capability with external sources • Static and Manual Bypass • Optional Galvanic isolation transformer and special voltage application options • Communication with computers and network systems with SNMP availability • Expandable battery blocks • Low installation and operating costs AL Q U A L IT Y C E ISO 9001 IF IC AT IO N • • T E R N A T IO N • IN IGBT Rectifier RT 24 • Your smart choice for UPS PYRAMID DSP SERIES SPECIFICATIONS MO D E L P D S P 380 P DS P 3100 P D S P 3120 P D S P 3160 P D S P 3200 O utput powe r ( kva ) P D S P 310 P D S P 315 P D S P 320 P D S P 330 P D S P 340 P D S P 360 10 15 20 30 40 60 80 100 120 160 200 N omina l A c tive P owe r ( kW ) 8 12 16 24 32 48 64 80 96 128 160 0.8 Power factor INPUT 3Ph+N+PE Number of phases Nominal Voltage 380V/400V/415V Voltage range (%100 load) ( Ph-N ) (-15)% (+27)% Voltage range (%64 load) ( Ph-N ) (-45)% (+27)% Voltage range (%42 load) ( Ph-N ) (-64)% (+27)% Nominal Frequency ( Hz ) 50 or 60 Frequency range for online operation ±10% Input Current THD ≤4% Input Power Factor 0.99 OUTPUT Number of phases 3Ph+N+PE Voltage 380V/400V/415V Static Voltage Regulation at %100 Linear Load ( online&battery mode ) <1% Voltage THD at rated linear load <3% Crest factor 3:1 Frequency (Hz) 50 or 60 ± 0.01% Free Running Frequency (Hz) 125% for 10 minutes 150% for 1 minute Overload 92% Efficiency STATIC BYPASS LINE 3Ph+N+PE Number of phases 220V / 230V (Ph-N) ± 10% Voltage Range for bypass operation 47-53 ( Configurable ) Frequency Range for bypass operation (Hz) BATTERY Type Seal Lead Acid Maintenance Free 62 ( 2*31 ) Battery Quantity (pcs ) Deep Discharge Protection with Auto Cut off Battery Protection Standard ( Automatic and Manual ) Battery Test COMMUNICATION RS232 & RS422 Interface (Communication Ports ) AC failure, Battery under voltage, bypass operation, output failure Dry Contact Signals EPO, Generator interface Others ENVIRONMENTAL CONDITIONS Storage Temperature Range (°C ) -25 to +55 ( 15 to 40 recomended for longer battery life time ) Operating Temperature Range (°C ) 0 to 40 ( 20 to 25 recomended for longer battery life time ) Relative Humidity Range 0-95% ( non-condensing ) Maximum Altitude without derating (m) 1000 IP20 Protection Level Noise Level < 65 dB < 60 dB < 68 dB < 75 dB EN 50091-1-1 , EN 50091-2, EN50091-3, EN55022, EN 62040-1-1, EN 62040-2, EN 62040-3 (VFI-SS-111) Standards Dimensions wxdxh (cm) Weight (kg ) 40 x 78 x 107 102 Product Certification 110 52 x 90 x 130 240 242 67x73x153 64x98x140 77x76x168 260 295 330 CE OPTIONS Parallel kit, SNMP internal slot card or external adapter, split by-pass, remote monitoring panel, isolation transformer, battery cabinet, Netservice SP The Sun Power Co.,Ltd. 31 Soi Prachauthit 59, Yeak 5, Bangmod, Thungkru, Bangkok 10140, THAILAND. Tel: (+66)-2-872-9501, Fax: (+66)-2-872-9505, email: [email protected], WWW.THESUNPOWER.CO.TH 96x87x1 88 555 575 Pyramid DSP Premium Series Your smart choice for UPS On-Line “Double Conversion” Technology, 3phase in / 3phase out 10 to 100kVA High Output Power Factor : 0,9 Graphical Touch Screen Front Display Panel Real Digital Signal Processor (DSP) controlled transformerless design Input Power Factor Correction PFC( >0,99 ) Low Total Harmonic Distortion Level ( THDi ≤ 4% ) Wide Input Voltage Range Generator Compatible Operation Evolution and redundancy guaranteed by on site Modular Parallel Systems Intelligent battery management system extends the lifetime of batteries Static and Manual Bypass Communication with computers and network systems with SNMP availability Expandable battery blocks Low installation and operating costs Accessories Communication • Remote Monitoring Panel &25m Cable For Remote Panel • UPSMAN (Management Software) • Multiserver Shutdown Licence • Internal SNMP kit : Internal Slot Card SNMP CS121BSC or CP504, slot box, cable • External Adapter SNMP Adapter Net Agent Mini DT 522 SNMP Adapter CS121BL Other • Split By-pass • Parallel Kit • Drawer Type Internal Battery Shelves 10 - 30kVA • Special Battery Connection Cable for Drawer Type Shelves Battery Cabinets V14, V15, V24, V33, V34 BC00, BC10, BC20, BC30, BC40, BC50, BC60 The Sun Power Co.,Ltd. L RTIFICAT I E INT NA CE RNAT IO 31 Soi Prachauthit 59, Yeak 5, Bangmod, Thungkru, Bangkok 10140, THAILAND. Tel: (+66)-2-872-9501, Fax: (+66)-2-872-9505, email: [email protected], WWW.THESUNPOWER.CO.TH ON S SP Pyramid DSP Premium Series PDSP-P 33010 MODEL PDSP-P 33015 PDSP-P 33020 PDSP-P 33030 PDSP-P 33040 PDSP-P 33060 PDSP-P 33080 PDSP-P 33100 Output power ( kVA) 10 15 20 30 40 60 80 100 Nominal Active Power ( kW ) 9 13,5 18 27 36 54 72 90 INPUT Number of phases 3Ph+N+PE Nominal Voltage ( 3ph Phase to Phase ) 380V/400V/415V Voltage range (-15)% (+27)% Voltage range (%64 load) (-45)% (+27)% Voltage range (%42 load) (-64)% (+27)% Nominal Frequency ( Hz ) 50 or 60 Frequency range for online operation ±10% Input Current THD ≤4% (*) ( **) Input Power Factor 0,99 OUTPUT Power factor 0.9 Number of phases 3Ph+N+PE Voltage ( 3ph Phase to Phase ) 380V/400V/415V Static Voltage Regulation at %100 Linear Load ( online&battery mode ) <1% Voltage THD at rated linear load <3% Crest factor 3:1 Frequency (Hz) 50 or 60 Free Running Frequency (Hz) ± 0.01% 125% for 10 minutes 150% for 1 minute Overload up to 94% (**) BATTERY Type Maintenance-free Lead Acid Batteries Quantity (pcs ) 62 ( 2*31 ) Battery Protection Battery Test Standard ( Automatic and Manual ) DISPLAY 3.5” Graphical Touch Screen Input & Output Frequency, Voltage & Current, Load Power Factor, Load%, Load Active & Apparent Power, Bypass Volt age & Frequency, Battery Voltage, Current & Temperature, Autonomy Time (min), STATIC BYPASS Number of phases 3Ph+N+PE Voltage Range for bypass operation ± 10% Frequency Range for bypass operation (Hz) COMMUNICATION Interface (Communication Ports ) Relay Contact Signals (Adjustable) RS232, RS485 (ModBus) Programmable 4 Relay Contacts to any of following signals ; General Alarm, Input Failure, Battery Failure, Output Failure, Bypass Acvite, Output Overload, High Temperature Others EPO, Generator Interface ENVIRONMENT Storage Temperature Range (°C ) -25 to +55 ( 15 to 40 recomended for longer battery life time ) Operating Temperature Range (°C ) 0 to 40 ( 20 to 25 recomended for longer battery life time ) Relative Humidity Range 0-95% ( non-condensing ) Maximum Altitude without derating (m) 1000 Protection Level IP20 Audible Noise Level from 1m (dBA) 50 52 55 58 60 80 100 PHYSICAL SPECIFICATIONS Output power ( kVA) 10 15 100 114 Dimensions WxDxH (cm) Weight (kg) 20 30 116 122 40 x 78 x 107 40 52 x 90 x 130 180 60 67 x 73 x 163 253 STANDARDS Standards EN 62040-1-1 (Safety), EN 62040-2 (EMC), EN 62040-3 (VFI-SS-111) L E INT RTIFICAT I ON NA CE RNAT IO (*) for source having THDv < 2 % @ nominal load (**) varies depending on ups power 285 85 x 78 x 182 405 - S Source Transfer Switch STS 220 series SmartPower Source Transfer Switch (STS), also known as the Redundant switch or Automatic Transfer Switch (ATS) or Static Transfer Switch (STS), is a high availability switch that has two input power sources for each AC line, which provide a redundancy electrical power for equipment. The power source of STS can be from the same or different source of transformers. The STS is designed to supply an electric power for equipments from a primary source and once the primary source is outage, then the STS will automatically transfer an output power supply to the secondary source. The transfer time during the power source transfered is limited at 8-12 ms, which is lower than the standard for the safty range, the power source switching is seamlessly to IT equipment. Per the ITI Curve, typical power supplies will operate 20ms after AC voltage drops to zero, and the switching occurs safely between the two input sources regardless of any phase differences. The STS unit have provided network connectivity (as optional), which allows for remote management through Web, SNMP or Telnet interfaces. Robust & Reliability out-of-phase switching SmartPower STS is designed to provide redundancy as close as possible to the equipment, The STS deploys a “Break Before Make” technology based on relays to prevent relay welding and also double protection from any incident eror with glas tube fuses, so there is no cross-connection of sources, regardless of the phase between sources. In an event of a short-circuit, the STS ensures that the fault could not affect an alternative source, therefore you can ensure to have a fault-free power source. Features: - Seamless power transfer to IT equipment per the ITI Curve. - User friendly with LCD & LED display with buzzer alarm. - True RMS Voltage, Load Current and Watt display. - Input & Output LED status & fault indicator. - Automatic transfer to the secondary source while the primary source power outage. - Power source transferable by manually are available. - Event log with real time clock stamp. - Audible alarm & fault indicator during Phase fault detection, Sources voltage abnormal. - Audible alarm during transfer to backup source. - Primary source selectable. - User friendly setup via LCD panel or SNMP web interface; +Setup an input voltage range: +/- 5,10,15,20,25% +Setup Automatic recovery or Manually transfer while primary source recover to normal. +Setup Automatic recovery time delay: 5,15,30,45,60 seconds after primary source recover to normal +Setup System Time - Input source cross-connection protection by “Break Before Make” and from any incident error with glass tube fuses. - Short circuit protection with thermal circuit breaker. - Slim size designed, only 1U for rack 19” Source Transfer Switch STS 220 series Technical specifications Model STS 16 STS 30 Rating Current 16 Amp 30 Amp Input Voltage Range 220VAC (+/- 5,10,15,20,25% selectable) 50 Hz. 1 Phase with Ground Auto Recovery Time 5,15,30,45 or 60 seconds selectable Protection Thermal circuit breaker for short circuit protection Input source cross-connection protection with break before make and glass tube fuse Transfer Time Typical 8-12 ms. (*Less transfer time to be requested as optional) Input/Output Plug Type NEMA 5-15 or IEC C13/C19 or Terminal block or Power plug receptacle 2P+E Indicator LCD & LED indicator: True RMS voltage, Current and Watt display, Fault error, Input & Output power status, Event log, Utility Source available, etc. Audible Alarm Over load, Transfer to backup source, Input phase fault, Communication fault Management SNMP card (option) Complied Standard ISO9001, EN50091-1,EN50022/B, IEC1000-4 Dimension WxDxH 430x250x45 mm 3 kg. Weight 3.1 kg. Specification are subject to change without prior notice. UP/DOWN BOTTOM LCD Pisplay Enter bottom Output Status Source Status AC Terminal Output NEMA 5-15 outlets Alarm Mute Select Primary Source Fault GND Status AC Terminal Input Source 1 & Source 2 Thermal Circuit Breaker Glass tube fuses IEC C13 outlets Input/Output Power Plug Receptacle 2P+E STS 16: Power Cord Length 5m 16A STS 30: Power Cord Length 5m 32A IEC C19 outlets Glass tube fuses Thermal Circuit Breaker The Sun Power Co.,Ltd. 31 Soi Prachautit 59, Yeak 5 Tel. 02-872-9501/4 Fax.02-872-9505 Bangmod,Thungkru, WWW.THESUNPOWER.CO.TH Bangkok 10140 THAILAND. Email. [email protected]