Transcript
littil Product Range 2015
Product Certification
This product does not contain Mercury, so it is safer to handle and more environmentally friendly than CFLs, fluoro tubes and Mercury vapour lights.
This product has been rigorously tested at a Victorian Metropolitan Fire Brigade site.
This product is currently approved under the Victorian VEET Scheme.
This product is currently approved under the NSW Energy Saving Scheme.
PRODCUT CATALOGUE September 2015 | www.littil.com.au
Catalogue Index DOWNLIGHTS Downlights > Optima 9W & 12W CREE COB Recessed Downlight
1 1-2
> Proform II Retro Kit 9W MR16
3
> 6W & 9W GU10 Recessed Downlight
4
> LED Universal Dimmer 200W
5
> 6W MR16 Short Downlight
6
> IQ Smart Downlight 6W
7
> GU10 4W, 6W & 9W Downlights
8
> POLAR 17W Frosted Recessed Downlight
9
> POLAR 10W & 12W Frosted Recessed Downlight NEW
10
BULBS Bulbs
11
> 2.5W & 5W G60/G80 Bulbs
11
> 7W, 12W & 7W & 9W Dimmable G60/G70 Bulbs
12
> 3W C35 Candle Bulb
13
> 5W, 8W & 11W G24 PLC
14
> 3.5W LED Filament COB Bulb
15
> LED Corn Lamp
16
Surface Mounted > 18W & 30W Surface mounted Oyster Light UPGRADED
17 17
Linear
18
> T8 LED Tube
18
> T5 Converter Kit
19
> LED Troffer
20-22
> T8 LED Tube Batten, Batten & Cage, Batten & Diffuser
23-25
> IP65 LED Batten & LED Tube
26
> Linear Highbay Series
27
Floodlights
28 28
> LED Floodlight
Highbays
29 29-30
> LED Highbay Series 1 & 2
Retail Display > LUNA 25W & 35W Series
30 31
1
Downlights
OPTIMA 9W RECESSED DOWNLIGHT
50,000 Hr
For new home or renovation installations This recessed downlight consumes only 9 Watt of power, and delivers a warm white light conveniently spread at 60°. It has a similar lighting effect compared to the traditional quartz halogen downlight, hence it is suitable for all home or commercial applications. This lamp helps achieve 6 Star efficiency standard requirements for lighting in homes and residential buildings.
Features & Benefits
Dimmable driver on leading/trailing edge dimmers. Low operating temperature < 55°C. Replacement results in >80% energy savings. 110 mm flange available for 90 mm cut outs. Available in 3000K & 4000K.
Trim Options:
Specifications* Model
Stock Code
RDLS-9D30-60WH
9343907002335
RDLS-9D40-60WH
9343907002359
LED
CREE
Voltage
Trim
Beam angle
CCT
Lumen output
12 VDC
White
60°
3000K
665 Lm
12 VDC
White
60°
4000K
720 Lm
* Technical specifications subject to change without notice.
Trim
White or silver
Power Factor
> 0.9
CRI
> 80
Dimension (LxW)
100 x 90 mm (cut out = 75 mm)
External driver
200mA
Dimming
HPM, CLIPSAL, DETA & LITTIL
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Downlights
OPTIMA 12W RECESSED DOWNLIGHT
2
50,000 Hr
For new home or renovation installations This recessed downlight consumes only 12 Watt of power, and delivers a warm white light conveniently spread at 60°. It has a similar lighting effect compared to the traditional quartz halogen downlight, hence it is suitable for all home or commercial applications. This lamp helps achieve 6 Star efficiency standard requirements for lighting in homes and residential buildings.
Features & Benefits
Dimmable driver on leading/trailing edge dimmers. Low operating temperature < 55°C. Replacement results in >75% energy savings. 110 mm flange available for 90 mm cut outs. Available in 3000K & 4000K.
Trim Options:
98 mm
Specifications* Model
Stock Code
RDLS-12D30-60WH
9343907002298
RDLS-12D40-60WH
9343907002311
LED
CREE
Voltage
Trim
Beam angle
CCT
Lumen output
12 VDC
White
60°
3000K
750 Lm
12 VDC
White
60°
4000K
800 Lm
* Technical specifications subject to change without notice.
Trim
White or silver
Power Factor
>0.9
CRI
>80
Dimension (LxW)
100 x 90 mm (cut out = 75 mm)
External driver
280mA
Dimming
HPM, CLIPSAL, DETA & LITTIL
PRODUCT CATALOGUE September 2015 | www.littil.com.au
3
Downlights
Proform II 9W MR16, retrofit kit
50,000 Hr
Replacing traditional halogen downlights and drivers This 9 Watt, 12 Volt DC LED lamp with dimmable driver is a direct replacement for the energy consuming 50W quartz halogen globe. Perfectly suited for residential and hospitality lighting. The ideal LED lighting for foyers, walkways, high spec galleries, museums, retail spot or feature lighting. The lamp has almost zero electromagnetic emission and does not interfere with other devices.
Features & Benefits
Low operating temperature < 55°C. Results in > 80% energy savings. Contains high quality Cree LED chip. Internal dimmable driver which suits leading/trailing edge dimmers.
Specifications* Model
Stock Code
Voltage
Trim
Beam angle
CCT
Lumen output
Retro9-3K
9343907000874
12V DC
Silver
45°
3000K
500-550 Lm
* Technical specifications subject to change without notice.
LED
9W COB
Power Factor
0.9
Driver
650 mA
Dimension (LxW)
115 x 48 mm
CRI
> 70
Base
G5.3
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Downlights
GU10 Recessed Downlight 6W / 9W
4
50,000 Hr
Replacing traditional halogen downlights and drivers This 6 or 9 Watt, 240 Vac LED lamp is a direct replacement for the energy consuming 50W quartz halogen globe. The lamp has near zero electromagnetic emission and does not interfere with other devices. The hood lighting fixture is uniquely designed for Australia. The lamp itself is available with a dimmable or non-dimmable internal driver. Highly suitable for application in foyers, walkways, hospitality venues, high spec galleries or museums, retail spot or feature lighting.
Features & Benefits
Unique optical design for a uniform comfortable light beam. High colour rendering index >75. Contains COB LED chip. Both dimmable and non-dimmable luminaire available. Warm light in 3000K or neutral light in 4000K.
Specifications* Model
Stock Code
Voltage
Power
Trim
Beam angle
CCT
Lumen output
RDLGU10-6W30W
9343907001031
240 VAC
6W
White
60°
3000K
420 Lm
RDLGU10-6W40W
9343907001147
240 VAC
6W
White
60°
4000K
420 Lm
RDLGU10-9W30W
9343907000011
240 VAC
9W
White
60°
3000K
720 Lm
RDLGU10-9W40W
9343907000015
240 VAC
9W
White
60°
4000K
720 Lm
* Technical specifications subject to change without notice.
CRI
> 75
Power Factor
0.90
Base
GU10
Dimension
81 mm diameter 118 mm / 138 mm hood height 72 mm cut out
PRODUCT CATALOGUE September 2015 | www.littil.com.au
5
Downlights
LED Universal Dimmer 200W Designed for Constant Current LED drivers
At last the perfect dimmer that seamlessly combines with LED products that require leading or trailing edge lighting control. This new technology will allow deep and smooth dimming from 0% to 100%. Ideal for application in residential buildings, hotels, restaurants, art galleries and museums or any other commercial or industrial premises.
Features & Benefits
Leading and trailing edge control. Fits into Clipsal plates. No noise and no flicker. Natural smooth dimming curve. Eliminates light level shimmer at deep dimming levels. Fully compatible with almost all dimmable LED drivers. SAA / TUV & RoHS approved.
Specifications* Model
Stock Code
DIMM200U
9343907001048
Voltage
Trim
Power
Minimal Load
Overheating Protection
220 - 240 VAC
White
200W
3W
Thermal fuse
* Technical specifications subject to change without notice.
EMC
EN55015 & EN61000 Class A
Input Frequency
50Hz
Function
Soft Start
Input Current
0.9A
Warranty
2 Years
Dimensions
23 x 23 x 56 mm
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Downlights
6W MR16 Short Downlight
6
50,000 Hr
Replacing traditional halogen downlights
This 6 Watt, 12 Volt DC LED lamp is a direct replacement for the energy consuming 35W quartz halogen globe. This lamp has no electromagnetic interference and zero radiation, making it suitable for high spec galleries, museums, display counters and retail windows.
Features & Benefits
100% plus luminarie efficiency Superior colour rendering, near daylight, index = 90 Available also in 240V GU10 Energy saving, high brightness and long life
Specifications* Model
Stock Code
Voltage
Power
Trim
Beam angle
CCT
MR16S634D-60E
9343907000188
12 VDC
9W
Silver
60°
3400K
MR16S634D120E
9343907000027
12 VDC
9W
Silver
120°
3400K
MR16S645D-50E
9343907000034
12 VDC
9W
Silver
50°
4500K
MR16S634D-50E
9343907000010
12 VDC
9W
Silver
50°
3400K
* Technical specifications subject to change without notice.
LED
3 x 3W CREE
Power Factor
0.9
Lumen output
220 Lm
Dimension (LxW)
48.5 x 50 mm
CRI
> 75
Base
G5.3
PRODUCT CATALOGUE September 2015 | www.littil.com.au
7
Downlights
IQ Smart Downlight 6W
50,000 Hr
The Smartest Lamp in the World Led lighting offers terrific advantages over conventional lighting. The problem to date has been that most LED lights will not work on existing halogen transformers and will not dim properly. That problem has now been overcome with the introduction of the Littil LED IQ Smart Lamp.
Features & Benefits Designed & Engineered in Australia. Designed to work on many different existing transformers and dimmers.
Contains a BridgeLux COB LED chip tuned down to 6W. Plug & Play installation.
Specifications* Model
Stock Code
Voltage
Trim
Beam angle
CCT
Dimmable
MR16IQ630-60
9343907000202
12 VDC
Silver
50°
3000K
No
MR16IQ640-60
9343907000204
12 VDC
Silver
50°
4000K
No
MR16IQ630-60D
9343907000205
12 VDC
Silver
50°
3000K
Yes
MR16IQ640-60D
9343907000203
12 VDC
Silver
50°
4000K
Yes
* Technical specifications subject to change without notice.
LED
BridgeLux COB
Power Factor
0.9
Lumen output
450 - 550 Lm
Dimension (LxW)
48 x 80 mm
CRI
> 70
Base
G5.3
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Downlights
GU10 Downlights 4W / 6W / 9W
8
50,000 Hr
Replacing traditional GU10 halogen downlights These 4 Watt, 6 Watt & 9 Watt, 240 Volt LED lamp are a direct replacement for the energy consuming 50W quartz halogen globe. With no electromagnetic interference and zero radiation, they are highly suitable for high-spec galleries and museums, perfect for display counters and retail windows boxes.
Features & Benefits
High colour rendering CRI >75 CCT near daylight colour temperature. Dimmable and non-dimmable available. Available also in 12V MR16 Energy saving, high brightness and long life.
Specifications* Model
Stock Code
Voltage
Power
Beam angle
CCT
Lumen output
LED
Dimmable
GU10L9-34-60
9343907000164
240 VAC
9W
60°
3400K
450 Lm
SMD
No
GU10S6D30-60
9343907001697
240 VAC
6W
60°
3000K
400 Lm
COB
Yes
GU10S4D30-60
9343907001673
240 VAC
4W
60°
3000K
270 Lm
COB
Yes
* Technical specifications subject to change without notice.
CRI
> 75
Power Factor
0.9
Base
GU10
Dimension (LxW)
9W heatsink: 79 x 50 mm 6W heatsink: 72 x 50 mm 4W heatsink: 62 x 50 mm
PRODUCT CATALOGUE September 2015 | www.littil.com.au
9
Downlights
POLAR 17W FROSTED RECESSED DOWNLIGHT
50,000 Hr
For new home or renovation installations Constant current input LED lamp series is a conscious new approach for innovative builders and home renovators. It comfortably replaces 3 traditional energy consuming 50W quartz halogen lamps. This recessed downlight with frosted cover consumes only 17 Watts of power— and is perfectly suited for areas that require a passive or indirect flood lighting.
Features & Benefits
> 80% energy saving replacement Dimmable on leading and trailing edge dimmers. COB LED chip. Beam angle of 120 degrees. Non gimballed. 17W will cover up to 4 x 4 m room/floor surface
Specifications* Model
Stock Code
Dimension (LxW)
Power
Trim
Cut out diameter
CCT
RDLS-L17D30-190W
9343907000591
65 x 190 mm
17W
White
178mm
3000K
RDLS-L17D40-190W
9343907002168
65 x 190 mm
17W
White
178mm
4000K
RDLS-L17D30-240W
9343907001567
75 x 240 mm
17W
White
218 mm
3000K
RDLS-L17D40-240W
9343907001550
75 x 240 mm
17W
White
218 mm
4000K
* Technical specifications subject to change without notice.
Lumen output
1270 - 1350 Lm
Power Factor
0.9
CRI
> 65
Beam angle
120°
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Downlights
POLAR 10W / 12W RECESSED DOWNLIGHT
10
50,000 Hr
NEW
For new home or renovation installations Constant current input LED lamp series is a conscious new approach for innovative builders and home renovators. Replacing the 50W quartz halogen lamps, this recessed downlight lamp series with frosted cover, consumes only 10 or 12 Watt of power— perfect to illuminate areas that require an indirect flood lighting.
Features & Benefits
Built-in driver. IP 44 rating. 3 year warranty. > 80% energy saving replacement Everlight COB LED chip. Available in 3000K (warm) / 4000k (neutral) light colour. Complete with 1.5 m Australian approved flex and plug.
Specifications* Model
Stock Code
Power
Cut out diameter
CCT
Lumen output
Beam angle
RDL10FROST3070
9343907002294
10W
70 mm
3000K
700 Lm
120°
RDL10FROST4070
9343907002295
10W
70 mm
4000K
800 Lm
120°
RDL12FROST3090
9343907002296
12W
90 mm
3000K
816 Lm
120°
RDL12FROST4090
9343907002297
12W
90 mm
4000K
936 Lm
120°
* Technical specifications subject to change without notice.
Trim
White
CRI
> 80
Voltage
175V - 265 VAC
PRODUCT CATALOGUE September 2015 | www.littil.com.au
11
Bulbs
G60 Bulb 2.5W / G80 Bulb 5W
50,000 Hr
Replacing traditional 40W incandescent globes These 2.5 Watt & 5 Watt, 240 Volt AC LED lamps are a direct replacement for the energy consuming 40W & 60W traditional incandescent globes. They suit all traditional bayonet and screw sockets. 2.5 Watt LED bulbs are perfect for all casual wall and table lamps and the 5 Watt version is perfect for ceiling light fittings and large standard lamps.
Features & Benefits
Unique optical design for uniform light beam. Contains Epistar SMD LEDs. 85 Lm/W & 60 Lm/W luminaire efficiency. High colour rendering index > 70-75. > 90% power and lighting cost savings.
SAA122109
Specifications* Model
Stock Code
Voltage
Power
Trim
Beam angle
Lumen output
CCT
Base
G60-2.5ES34
9343907000447
240 VAC
2.5W
White
120°
200 Lm
3400K
E27
G60-2.5BC34
9343907000409
240 VAC
2.5W
White
120°
200 Lm
3400K
B22
G80-5ES34
9343907000416
240 VAC
5W
White
120°
250 - 280 Lm
3400K
E27
G80-5BC34
9343907000430
240 VAC
5W
White
120°
250 - 280 Lm
3400K
B22
* Technical specifications subject to change without notice.
LED
48 x SMD Epistar 36 x SMD 5050 Epistar
Power Factor
0.8
CRI
> 70 > 75
Dimension (LxW)
109 x 60 mm 132 x 80 mm
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Bulbs
LED Bulbs 7W / 9W / 12W
12
50,000 Hr
Replacing traditional 75w & 100w incandescent globes These 7 and 12 Watt 240 volt AC LED lamps are a direct replacement for the energy consuming 75W and 100W traditional incandescent globes. The bulbs fit the traditional bayonet and Edison screw sockets.and have zero electromagnetic emission and zero interference with other devices. They are perfect for conventional ceiling light fittings and large standard lamp luminaires.
Features & Benefits
Unique optical design for uniform light beams. Contains Epistar SMD LEDs. 60 Lumen per Watt luminaire efficiency. High colour rendering index >75 > 90% power and lighting cost savings.
SAA122109
Specifications* Model
Stock Code
Voltage
Power
Lumen output
Beam angle
CCT
Base
Dimmable
G70-12ES30
9343907002083
240 VAC
12W
930 Lm
120°
3000K
E27
No
G70-12BC30
9343907002090
240 VAC
12W
930 Lm
120°
3000K
B22
No
G70-9ES30D
9343907001708
240 VAC
9W
750 Lm
120°
3000K
E27
Yes
G70-9BC30D
9343907001710
240 VAC
9W
750 Lm
120°
3000K
B22
Yes
G60-7ES30
9343907002069
240 VAC
7W
550 Lm
120°
3000K
E27
No
G60-7BC30
9343907002076
240 VAC
7W
550 Lm
120°
3000K
B22
No
G60-7ES30D
9343907001734
240 VAC
7W
550Lm
120°
3000K
E27
Yes
G60-7BC30D
9343907001741
240 VAC
7W
550 Lm
120°
3000K
B22
Yes
* Technical specifications subject to change without notice.
LED
Epistar SMD
Power Factor
0.8
Trim
White
Dimension (LxW)
132 x 80 mm
CRI
> 75
PRODUCT CATALOGUE September 2015 | www.littil.com.au
13
Bulbs
C35 Candle Bulb 3W
50,000 Hr
Replacing traditional 40W candle bulbs This 3 Watt, 240 VAC lamp is a direct replacement for the energy consuming 40 Watt traditional incandescent candle globes. The bulb has zero electromagnetical emission and zero interference with other devices, and also fits all traditional bayonet and screw sockets. Perfect for chandeliers or light fittings with exposed globes that need to look attractive.
Features & Benefits
> 90% energy and lighting cost savings. 4 x socket options (standard and mini). Warm light colour of 3000K. Beautiful candle style. NOW DIMMABLE VERSION AVAILABLE
Specifications* Model
Stock Code
Voltage
Power
Trim
Dimmable
Beam angle
CCT
Base
C35-3ES
9343907000580
240 VAC
3W
Silver
No
120°
3000K
E27
C35-3BC
9343907000579
240 VAC
3W
Silver
No
120°
3000K
B22
C35-3SES
9343907000584
240 VAC
3W
Silver
No
120°
3000K
E14
C35-3SBC
9343907000578
240 VAC
3W
Silver
No
120°
3000K
BA15D
C35-3ESD
9343907002410
240 VAC
3W
Silver
Yes
120°
3000K
E27
C35-3BCD
9343907002397
240 VAC
3W
Silver
Yes
120°
3000K
B22
C35-3SESD
9343907002427
240 VAC
3W
Silver
Yes
120°
3000K
E14
C35-3SBCD
9343907002403
240 VAC
3W
Silver
Yes
120°
3000K
BA15D
* Technical specifications subject to change without notice.
LED
16 SMD
Power Factor
0.8
Lumen output
200 Lm
Dimension (LxW)
107 x 32 mm
CRI
> 70
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Bulbs
G24 LED PLC
14
40,000 Hr
Replacing 18W-26W traditional CFL Lamps At last an LED replacement for the G23/G24 CFL lamps. This universal G24 socket will fit nearly all existing G23/G24 sockets in both 2 & 4 pins. Plug and play in ironcore ballasts (must remove capacitor if fitted) or take the 240 VAC mains supply directly to the lampholder for electronic ballasts. Ideal for all recessed commercial fittings in council buildings, libraries and nursing homes.
Features & Benefits
Universal socket. High colour rendering index of 80. Unique optical design for uniform light beam. Provides energy and power costs savings. Available in frosted cover.
Specifications* Model
Stock Code
Power
Length
Beam angle
CCT
Lumen output
Base
G24-5W40
9343907000454
5W
122 mm
360°
4000 - 4500K
340 Lm
G24
G24E27-5W40
9343907000485
5W
122 mm
360°
4000 - 4500K
340 Lm
E27
G24-8W40
9343907000461
8W
157 mm
360°
4000 - 4500K
660 Lm
G24
G24E27-8W40
9343907000492
8W
157 mm
360°
4000 - 4500K
660 Lm
E27
G24-11W40
9343907000478
11W
176 mm
360°
4000 - 4500K
880 Lm
G24
G24E27-11W40
9343907000508
11W
176 mm
360°
4000 - 4500K
880 Lm
E27
* Technical specifications subject to change without notice.
LED
SMD
Power Factor
0.9
CRI
> 80
Voltage
80 - 254 VAC
PRODUCT CATALOGUE September 2015 | www.littil.com.au
15
Bulbs
COB Filament LED Bulb 3.5W
50,000 Hr
Replacing traditional 60W bulbs These 3.5 Watt COB filament LED bulbs operate directly on 240 VAC, and are a direct replacement for the energy consuming 60 Watt traditional incandescent globes. Their antique looking shape and warm light colour creates a sentiment of nostalgia, making them ideal for cafes and restaurants. The bulbs are available in the traditional bayonet and Edison screw sockets. Perfect for chandeliers or light fittings where the light bulbs are required to be visually attractive.
Features & Benefits
Results in > 90% energy savings. Reduced lighting costs. Attractive globe design and COB LED filaments. Very warm light colour in 2500K.
Specifications* Model
Stock Code
Voltage
Dimensions
Beam angle
CCT
Base
G55-3.5BC25F
9343907001987
240 VAC
125mm x 55mm
360°
2500K
B22
G55-3.5ES25F
9343907001994
240 VAC
125mm x 55mm
360°
2500K
E27
G60-3.5BC25F
9343907002007
240 VAC
140mm x 60mm
360°
2500K
B22
G60-3.5ES25F
9343907002014
240 VAC
140mm x 60mm
360°
2500K
E27
G70-3.5BC25F
9343907002021
240 VAC
120mm x 80mm
360°
2500K
B22
G70-3.5ES25F
9343907002038
240 VAC
120mm x 80mm
360°
2500K
E27
* Technical specifications subject to change without notice.
LED
COB
Power Factor
0.9
Lumen output
320 Lm
Trim
Silver
CRI
> 83
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Bulbs
LED Corn Lamp
16
50,000 Hr
Replacing traditional 50W - 500W Metal Halide This LED Corn Lamp is available in 20W, 30W, 50W, 80W, 100W, 120W and 150W and is a direct replacement for 50W - 500W Mercury Vapour & Metal Halide Lamps. Providing a full 360° beam angle, this light leaves no under-illuminated areas. 40W+ lamp models come with active air fan cooling, speeding up heat dissipation. Ideal for street, high bay, post top, and droplight fixtures in both indoor and outdoor environments.
Features & Benefits
IP40 rated. Wire insulated base. Meanwell drivers for 100W, 120W, 150W lamp models. Sunon fan for 40W+ lamp models. Aluminium heatsink. Easy retrofit. 3 year warranty.
Specifications* Model
Stock Code
Voltage
Power
Lumen output
CCT
Base [2]
Dimensions (WxH)
CL20E27-60
93439007000172
240 VAC
20W
2500 Lm
6000 - 6700K
E27
93 x 168 mm
CL30E27-60
93439007000173
240 VAC
30W
3800 Lm
6000 - 6700K
E27
105 x 173 mm
CL50E27-60
93439007000174
240 VAC
50W
6400 Lm
6000 - 6700K
E27
105 x 212 mm
CL80E40-60
93439007000175
240 VAC
80W
9800 Lm
6000 - 6700K
E40
105 x 283 mm
CL100E27-60MD
93439007000176
240 VAC
100W [1]
13000 Lm
6000 - 6700K
E40
128 x 282 mm
CL120E27-60MD
93439007000177
240 VAC
120W [1]
15000 Lm
6000 - 6700K
E40
128 x 307 mm
CL150E27-60MD
93439007000178
240 VAC
150W [1]
20000 Lm
6000 - 6700K
E40
128 x 332 mm
* Technical specifications subject to change without notice.
LED
Epistar SMD2835 LED 120 Lm/W
Power Factor
> 0.9
CRI
> 80
IP
IP20
Notes: [1] External Meanwell driver. [2] Adapter available.
PRODUCT CATALOGUE September 2015 | www.littil.com.au
(IP40 optional)
17
Surface Mounted
LED Oyster Light
40,000 Hr
Replacing traditional 55W Fluoro fitting. Constant current input LED Oyster lamp series is a conscious new approach for innovative commercial builders and office renovators. It comfortably replaces 2—3 traditional energy consuming 50W quartz halogen lamps. The surface mounted Oyster light series consumes only 15-30 Watt of power—perfect for areas that require a passive or indirect dimmable flood light.
Features & Benefits
60+% energy and lighting cost savings. 120° beam angle. IP54 for indoor use. Mounting bracket for easy installation. Non-gimballed. 15W will cover up to 4x4m room/space. Beautiful slim style. Availble in 300 mm & 350 mm. Dimmable (optional).
Specifications* Model
Stock Code
Voltage
Power
Beam angle
CCT
Lumen output
Dimensions (WxH)
OYS18-300-3
9343907002202
240 VAC
18W
120°
3000K
1350 Lm
300 x 40 mm
OYS18-300-4
9343907002200
240 VAC
18W
120°
4000K
1420 Lm
300 x 40 mm
OYS30-350-4
9343907002201
240 VAC
30W
120°
4000K
2490 Lm
350 x 40 mm
* Technical specifications subject to change without notice.
Trim
White
Power Factor
> 0.9
CRI
> 80
IP
IP54
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Linear
T8 LED Tube
18
50,000 Hr
Replacing traditional 36W fluorescent tubes 15 Watt T8 LED tube, direct replacement for the energy consuming T8 36W fluorescent tubes. Consumes only 15 Watt of power, with zero radiation, highly suitable for spaces that require a uniform, high definition light source. Ideal for the home, office, industrial, clear span retail and indoor public areas.
Features & Benefits
Now available in 4000K
Epistar SMD light source. Single end wired with starter socket & rotabable pins. Superior colour rendering index > 80. Unique optical design for uniform light beam. Provides energy and power costs savings. Available in clear and frosted lens. Color consistency SDCM: <6 MacAdam steps.
Socket
Clear Lens
Frosted lens
Specifications* Model
Stock Code
JAS-ANZ Model
Power
Length
Lumen output
CCT
Lens
T8LED2550-15
9343907001345
P-T825W1500
25W
1500 mm
2750 Lm
5500K
Clear
T8LED2550-15F
9343907001306
P-T825W1500
25W
1500 mm
2610 Lm
5500K
Frosted
T8LED1850-12
9343907000492
P-T818W1200
18W
1200 mm
2000 Lm
5500K
Clear
T8LED1850-12F
9343907001308
P-T818W1200
18W
1200 mm
1900 Lm
5500K
Frosted
T8LED1550-12
9343907000379
P-T815W1200
15W
1200 mm
1650 Lm
5500K
Clear
T8LED1550-12F
9343907001307
P-T815W1200
15W
1200 mm
1560 Lm
5500K
Frosted
T8LED1050-6
9343907000393
P-T810W600
10W
600 mm
1100 Lm
5500K
Clear
T8LED1050-6F
9343907001314
P-T810W600
10W
600 mm
1045 Lm
5500K
Frosted
* Technical specifications subject to change without notice.
LED
SMD
Power Factor
0.9
Beam angle
120°
Dimension (Length)
1200 mm & 600 mm
CRI
>80
Voltage
240 VAC
PRODUCT CATALOGUE September 2015 | www.littil.com.au
19
Linear
T5 Fluoro Converter Kit
30,000hHr
Replacing traditional 36W fluorescent tubes This 14 to 35 Watt assembly is a direct replacement for the energy consuming T8 fluorescent tubes. Fitted with a tri-phosphor tube and rear miro reflector, the tube consumes only 14, 21 and 35 Watt respectively. Ideal for office, commercial stairwells, industrial and indoor public areas.
Features & Benefits
Energy saving, high brightness and long lifetime. 100% plus luminaire efficiency. Superior colour rendering index > 75. Unique optical design for uniform light beam. 1200mm 28W converter is tuned down to only 22W.
Specifications* Model
Stock Code
Voltage
Trim
Beam angle
CCT
Unit Size
T5-14-65-30-6
9343907000089
240 VAC
White
120°
6500K
600 mm
T5-18-65-30-9
9343907000355
240 VAC
White
120°
6500K
900 mm
T5-22-65-30-12
9343907000072
240 VAC
White
120°
6500K
1200 mm
T5-35-65-30-15
9343907000102
240 VAC
White
120°
6500K
1500 mm
* Technical specifications subject to change without notice.
CRI
> 75
Power Factor
0.98
Lumen output
1200 -1500 Lm
Dimension (Length)
600, 900, 1200 & 1500 mm
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Linear
LED Troffer littil standard driver, dimming optional
20
50,000 Hr
Replacing 84W twin T8 fluorescent fitting Constant current input 32W LED lamp, direct replacement for the energy consuming 85W twin 1200 x 300 mm , 600 x 600 mm, 600 x 300 mm or 1200 x 600 mm light fitting. Troffer and driver combined consume only 32/64 Watt, with zero radiation or interference. Suitable for every clear span, suspended or subdivided commercial or public area ceiling.
Features & Benefits
Unique optical design with lumen output ratio of 90%. High colour rendering index >85 Energy saving, cost saving, maintenance free. Contains no lead or mercury. Up to 2800 Lumens. Dimmable (optional). Kit available for Recessed/Surface mounted installation. Inclusive driver with flexible cord / AU mains plug. Driver 600 mA.
Optional
Specifications* Model
Stock Code
Voltage
Power
Dimension
Lumen output
CCT
Beam angle
LED32TROF12X3D40
9343907001253
240 VAC
32 W
1200 x 300
2700 Lm
4000K
120°
LED32TROF12X3D50
9343907002260
240 VAC
32 W
1200 x 300
2750 Lm
5000K
120°
LED32TROF12X3D60
9343907001246
240 VAC
32 W
1200 x 300
2800 Lm
6000K
120°
LED32TROF6X6D40
9343907002700
240 VAC
32 W
600 x 600
2700 Lm
4000K
120°
LED32TROF6X6D50
9343907002182
240 VAC
32 W
600 x 600
2750 Lm
5000K
120°
LED32TROF6X6D60
9343907001277
240 VAC
32 W
600 x 600
2800 Lm
6000K
120°
LED16TROF6X3D40
9343907002262
240 VAC
16 W
600 x 300
1350 Lm
4000K
120°
LED16TROF6X3D50
9343907002261
240 VAC
16 W
600 x 300
1375 Lm
5000K
120°
LED16TROF6X3D60
9343907002263
240 VAC
16 W
600 x 300
1400 Lm
6000K
120°
LED64TROF12X6D40
9343907002264
240 VAC
64 W
1200 x 600
5200 Lm
4000K
120°
LED64TROF12X6D50
9343907002265
240 VAC
64 W
1200 x 600
5400 Lm
5000K
120°
LED64TROF12X6D60
9343907002266
240 VAC
64 W
1200 x 600
5600 Lm
6000K
120°
* Technical specifications subject to change without notice. Lamp life depending on actual usage and environmental factors.
Dimensions:
1195 x 297 mm (outer rim) 1191 x 293 mm (luminaire box)
CRI
> 85
Power Factor
PRODUCT CATALOGUE September 2015 | www.littil.com.au
> 0.9
21
Linear
LED Troffer with Philips Certadrive driver.
30,000hHr 50,000
Replacing 84W twin T8 fluorescent fitting Constant current input 32W LED lamp, direct replacement for the energy consuming 85W twin 1200 x 300 mm , 600 x 600 mm, 600 x 300 mm or 1200 x 600 mm light fitting. Troffer and driver combined consume only 32/64 Watt, with zero radiation or interference. Suitable for every clear span, suspended or subdivided commercial or public area ceiling.
Features & Benefits
Unique optical design with lumen output ratio of 90%. High colour rendering index > 85. Energy saving, cost saving, maintenance free. Contains no lead or mercury. Up to 2800 Lumens. Philips Certadrive driver, non-dimmable. Kit available for Recessed/Surface mounted installation. Flexible cord / AU mains plug connected to driver.
Specifications* Model
Stock Code
Voltage
Power
Dimension
Lumen output
CCT
Beam angle
LED32TROF12X3D40PH
9343907002268
240 VAC
32 W
1200 x 300
2700 Lm
4000K
120°
LED32TROF12X3D50PH
9343907002269
240 VAC
32 W
1200 x 300
2750 Lm
5000K
120°
LED32TROF12X3D60PH
9343907002270
240 VAC
32 W
1200 x 300
2800 Lm
6000K
120°
LED32TROF6X6D40PH
9343907002271
240 VAC
32 W
600 x 600
2700 Lm
4000K
120°
LED32TROF6X6D50PH
9343907002272
240 VAC
32 W
600 x 600
2750 Lm
5000K
120°
LED32TROF6X6D60PH
9343907002273
240 VAC
32 W
600 x 600
2800 Lm
6000K
120°
* Technical specifications subject to change without notice. Lamp life depending on actual usage and environmental factors.
Dimensions:
1195 x 297 mm (outer rim) 1191 x 293 mm (light box)
CRI
> 85
Power Factor
PRODUCT CATALOGUE September 2015 | www.littil.com.au
> 0.9
Linear
LED Troffer with DALI Philips Xitanium driver.
22
50,000 Hr
Replacing 84W twin T8 fluorescent fitting Constant current input 32W LED lamp, direct replacement for the energy consuming 85W twin 1200 x 300 mm , 600 x 600 mm, 600 x 300 mm or 1200 x 600 mm light fitting. Troffer and driver combined consume only 32/64 Watt, with zero radiation or interference. Suitable for every clear span, suspended or subdivided commercial or public area ceiling.
Features & Benefits
Unique optical design with lumen output ratio of 90%. High colour rendering index > 85. Energy saving, cost saving, maintenance free. Contains no lead or mercury. Up to 2800 Lumens. Philips DALI driver, Xitanium series, dimmable. Kit available for Recessed/Surface mounted installation.
Specifications* Model
Stock Code
Voltage
Power
Dimension
Lumen output
CCT
Beam angle
LED32TROF12X3D40DA
9343907002275
240 VAC
32 W
1200 x 300
2700 Lm
4000K
120°
LED32TROF12X3D50DA
9343907002276
240 VAC
32 W
1200 x 300
2750 Lm
5000K
120°
LED32TROF12X3D60DA
9343907002277
240 VAC
32 W
1200 x 300
2800 Lm
6000K
120°
LED32TROF6X6D40DA
9343907002278
240 VAC
32 W
600 x 600
2700 Lm
4000K
120°
LED32TROF6X6D50DA
9343907002279
240 VAC
32 W
600 x 600
2750 Lm
5000K
120°
LED32TROF6X6D60DA
9343907002280
240 VAC
32 W
600 x 600
2800 Lm
6000K
120°
* Technical specifications subject to change without notice. Lamp life depending on actual usage and environmental factors
Dimensions:
1195 x 297 mm (outer rim) 1191 x 293 mm (light box)
CRI
> 85
Power Factor
PRODUCT CATALOGUE September 2015 | www.littil.com.au
> 0.9
23
Linear
T8 LED Batten
50,000 Hr
Replacing traditional 36W fluorescent tubes This T8 LED Batten fitting comes complete with VEEC Approved tubes in either clear or frosted and is available in 1200mm single, 1200mm double, 600mm single and 600mm double. Constructed of heavy gauge cold rolled steel with ballast cover locked by toolless screws for quick inspection. Easy for lamp replacement and no maintenance required.
Features & Benefits
Now available in 4000k
Socket
Clear Lens
Epistar SMD light source. Single end wired with starter socket & rotatable pins. Superior colour rendering index > 80. Unique optical design for uniform light beam. Provides energy and power costs savings. Available with clear or frosted lens T8 tubes.
Frosted lens
Specifications* Model
Stock Code
Power
Length
Beam angle
CCT
Lens
LEDBAT600S10W
9343907002502
10W
600 mm
120°
5000K
clear / frosted
LEDBAT600D20W
9343907002519
20W
600 mm
120°
5000K
clear / frosted
LEDBAT1200S15W
9343907002526
15W
1200 mm
120°
5000K
clear / frosted
LEDBAT1200D30W
9343907002533
30W
1200 mm
120°
5000K
clear / frosted
* Technical specifications subject to change without notice.
LED
SMD
Power Factor
0.9
Lumen output
1350 -1550 Lm
Dimension (Length)
1200 mm & 600 mm
CRI
> 80
Voltage
240 VAC
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Linear
T8 LED Batten with Cage
24
50,000 Hr
Replacing traditional 36W fluorescent tubes This T8 LED Batten fitting with cage comes complete with VEEC approved tubes in either clear or frosted lens and is available in 1200 mm single, 1200 mm double, 600 mm single and 600 mm double. Cage constructed of heavy gauge cold rolled steel to provide high protection to tubes. Ballast cover locked by toolless screws for quick inspection. Easy for lamp replacement and no maintenance required. Ideal for car parks and public areas.
Features & Benefits
Now available in 4000k
Socket
Clear Lens
Epistar SMD light source. Single end wired with starter socket & rotatable pins. Superior colour rendering index > 80. Unique optical design for uniform light beam. Provides energy and power costs savings. Available with clear or frosted lens T8 tubes.
Frosted lens
Specifications* Model
Stock Code
Power
Length
Beam angle
CCT
Lens
LEDBAT600S10WCG
9343907002588
10W
600 mm
120°
5000K
clear / frosted
LEDBAT600D20WCG
9343907002595
20W
600 mm
120°
5000K
clear / frosted
LEDBAT1200S15WCG
9343907002601
15W
1200 mm
120°
5000K
clear / frosted
LEDBAT1200D30WCG
9343907002618
30W
1200 mm
120°
5000K
clear / frosted
* Technical specifications subject to change without notice.
LED
SMD
Power Factor
0.9
Lumen output
1350 -1550 Lm
Dimension (Length)
1200 mm & 600 mm
CRI
> 80
Voltage
240 VAC
PRODUCT CATALOGUE September 2015 | www.littil.com.au
25
Linear
T8 LED Batten & Diffuser
50,000 Hr
Replacing traditional 36W fluorescent tubes This T8 LED Batten & diffuser fitting comes complete with VEEC approved tubes in either clear or frosted lens and is available in 1200 mm single, 1200 mm double, 600 mm single and 600 mm double fitting. Heavy gauge rolled steel caps lock lens into position. Ballast cover locked by tool-less screws for quick inspection. Easy for lamp replacement and no maintenance required.
Features & Benefits
Now available in 4000k
Socket
Clear Lens
Epistar SMD light source. Single end wired with starter socket & rotatable pins. Superior colour rendering index >80 Unique optical design for uniform light beam. Provides energy and power costs savings. Available with clear or frosted lens T8 tubes.
Frosted lens
Specifications* Model
Stock Code
Power
Length
Beam angle
CCT
Lens
LEDBAT600S10WDF
9343907002540
10W
600mm
120°
5000K
clear / frosted
LEDBAT600D20WDF
9343907002557
20W
600mm
120°
5000K
clear / frosted
LEDBAT1200S15WDF
9343907002564
15W
1200mm
120°
5000K
clear / frosted
LEDBAT1200D30WDF
9343907002571
30W
1200mm
120°
5000K
clear / frosted
* Technical specifications subject to change without notice.
LED
SMD
Power Factor
0.9
Lumen output
1350 -1550 Lm
Dimension (Length)
1200 mm & 600 mm
CRI
> 80
Voltage
240 VAC
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Linear
IP65 LED Batten & Diffuser
26
50,000 Hr
Replacing traditional 36W fluorescent tubes This LED IP65 Batten fitting comes complete with VEEC approved tubes in either clear or frosted lens and is available in 1200 mm single, 1200 mm double, 600 mm single and 600 mm double fitting. Easy release side clips and clearly marked single ended wired tombstones. Heavy duty diffuser and quick release inspection cover. Tamperproof diffuser tabs.
Features & Benefits
Now available in 4000k
Socket
Clear Lens
Epistar SMD light source. Single end wired with starter socket & rotatable pins. Superior colour rendering index > 80 Unique optical design for uniform light beam. Provides energy and power costs savings. Available with clear or frosted lens T8 tubes.
Frosted lens
Specifications* Model
Stock Code
Power
Length
Beam angle
CCT
Lens
LEDBAT1200SI5WIP65
9343907002649
15W
1200mm
120°
5000K
clear / frosted
LEDBAT1200D30WIP65
9343907002656
30W
1200mm
120°
5000K
clear / frosted
LEDBAT600SI0WIP65
9343907002625
10W
600mm
120°
5000K
clear / frosted
LEDBAT600D20WIP65
9343907002632
20W
600mm
120°
5000K
clear / frosted
* Technical specifications subject to change without notice.
LED
SMD
Power Factor
0.9
Lumen output
1350 -1550 Lm
Dimension (Length)
1200 mm & 600 mm
CRI
> 80
Voltage
240 VAC
PRODUCT CATALOGUE September 2015 | www.littil.com.au
27
Linear
Linear Highbay Series
30,000 Hr
Replacing traditional metal halide and mercury vapour Constant Current input lamp 216W, direct replacement for the energy consuming 400W Mercury Vapour and 400W Metal Halide lamps. Consumes only 216 Watt of power, with conventional cool white light gimballed spread at 45-120 degrees. Brilliant light for all industrial, warehouse or covered work spaces.
Features & Benefits
Suspended or SurfaceMounted- variable length 48% plus energy saving replacement. Reduced maintenance. Quality Philips electronic ballast. Quality GE Starcoat T5 fluoro tubes. 5m Suspension chains, 5m flex & 3 pin mains plug.
Specifications* Model
Stock Code
Mount Height
Mounting
Dimensions
FLUROBAT1200SP4
9343907002657
3M-10M
Suspended comes with 5m chain & 5m 3 core flex & plug
L 1215mm W 300mm H 98mm
FLUROBAT1200SM4
9343907002658
3M-10M
Surface monted comes with 5m 3 core flex & plug
L 1220mm W 280mm H 65mm
* Technical specifications subject to change without notice.
Tube
GE T5 StarCoat High Output , 54W
Power Factor
>0.97
Reflector
Alanod 320G / Miro 4
CCT
6500K
Ballast
Philips Electronic Ballast
Nomimal Lumen Flux[lm]
4 x 4460 (for 830/840)
CRI
> 85
Optional Diffuser
Frosted or Clear PMMA
Lumen output
24000 Lm
Optional Guard
2.5mm wire white power coat
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Floodlights
LED Flood Light NEW
28
50,000 Hr
Replacing 50W to 400W Flood Lamps. Waterproof LED Flood light in 10, 20, 30, 50, 80, 100, 150 or 200 Watt, a direct replacement for the energy consuming 50W — 400W Metal Halide Flood Lamps. Zero radiation or interference, this high powered lamp is perfect for Residential & Commercial applications.
Features & Benefits
IP65 rated. Available in a CCT of 3000K or 5000K. High performance pipe efficiently dissipates heat. Patented zipped-fin technology. Waterproof respirator - Avoids fogging and condensation. 120° Beam angle. IR sensor (optional) for models up to 80W. Long 1m flex cable for easy installation.
Wide angle adjustment
3D heat dissipation
Specifications* Model
Stock Code
Power
Lumen output
Beam angle
Power Factor
FL10W50K
9343907000142
10W
950 - 1100 Lm
120°
0.9
FL20W50K
9343907000144
20W
1900 - 2200 Lm
120°
0.95
FL30W50K
9343907000146
30W
2800 - 3300 Lm
120°
0.95
FL50W50K
9343907000148
50W
4700 - 5300 Lm
120°
0.95
FL80W50K
9343907000150
80W
7600 - 8500 Lm
120°
0.95
FL100W50K
9343907000152
100W
9500 - 11000 Lm
120°
0.95
FL150W50K
9343907000154
150W
14000 - 15500 Lm
120°
0.95
FL200W50K
9343907000156
200W
19000 - 21000 Lm
120°
0.95
* Technical specifications subject to change without notice.
LED
Epistar SMD2835
CRI
>75
Lumen output
950 - 21000 Lm
Driver
Meanwell Driver (100/150/200W)
PRODUCT CATALOGUE September 2015 | www.littil.com.au
29
Highbay
LED Highbay Series
50,000 Hr
Replacing traditional Metal Halide and Mercury vapour lamps. Constant Current input LED lamp with a power range from 100W to 240W, direct replacement for the energy consuming 200-400W Mercury vapour or Metal Halide lamps. Emits a light beam in conventional cool white light, with a light beam spread between 45°- 120° depending on the reflector choice. Ideal luminaire for all industrial, warehouse or covered spaces.
Features & Benefits
Suspended - variable length 50% plus energy saving replacement Reduced maintenance Suitable for multi strike application Quality internal MEANWELL driver with mains socket. Quality CREE chips
Reflector options: 45° - 90° - 120° TUV15546E
Specifications* Model
Stock Code
Voltage
Power
Beam angle
CCT
Lumen output
Inrush current [1]
GL-HBL-100W
9343907000850
240 VAC
100W
45°- 90°- 120°
5500K
9000 Lm
60A, 415μs
GL-HBL-120W
Custom Order
240 VAC
120W
45°- 90°- 120°
5500K
12000 Lm
60A, 375μs
GL-HBL-140W
9343907000836
240 VAC
140W
45°- 90°- 120°
5500K
14000 Lm
65A, 425μs
GL-HBL-160W
9343907000843
240 VAC
160W
45°- 90°- 120°
5500K
16000 Lm
65A, 445μs
GL-HBL-200W
9343907000829
240 VAC
200W
45°- 90°- 120°
5500K
20000 Lm
75A, 570μs
GL-HBL-240W
Custom Order
240 VAC
240W
45°- 90°- 120°
5500K
24000 Lm
75A, 570μs
* Technical specifications subject to change without notice.
LED
CREE
Power Factor
>0.92
Lumen output
9000 - 24000 Lm
Dimensions (WxH)
260 x 580 mm
CRI
> 70
Leakage current:
<0.75mA @ 277 VAC
Notes: [1] cold start inrush current, twidth measured at 50% Ipeak at 230VAC.
PRODUCT CATALOGUE September 2015 | www.littil.com.au
Highbay
LED Highbay Generation 2 NEW
30
50,000 Hr (°)
Replacing traditional Metal Halide and Mercury vapour lamps. Constant Current input LED lamp with a power range from 100W to 200W, direct replacement for the energy consuming 200-400W Mercury vapour or Metal Halide lamps. Emits a light beam in conventional cool white light, with a light beam spread between 50°- 120° depending on the lens plate choice. Ideal luminaire for all industrial, warehouse or covered spaces.
Features & Benefits
Suspended - variable length 50% plus energy saving replacement Reduced maintenance Suitable for multi strike application Quality internal MEANWELL driver with mains socket. Quality NICHIA chips Anti-glare hood.
Specifications* Model
Stock Code
Voltage
Power
Beam angle
CCT
Lumen output
Inrush current [1]
AGC-HB01-100
934390700830
240 VAC
100W
50° - 90° - 120°
5000K
11900 Lm
65A
AGC-HB01-120
934390700831
240 VAC
120W
50° - 90° - 120°
5000K
14280 Lm
65A
AGC-HB01-150
934390700832
240 VAC
150W
50° - 90° - 120°
5000K
17850 Lm
65A
AGC-HB01-200
934390700833
240 VAC
200W
50° - 90° - 120°
5000K
23800 Lm
75A
* Technical specifications subject to change without notice. (°) Lamp life depending on actual usage and environmental factors.
LED
NICHIA
Power Factor
> 0.93
IP
IP65
Dimensions (WxH)
383 x 193 x 383
CRI
> 70
Leakage current:
<0.75mA @ 277 VAC
Notes: [1] cold start inrush current, t-width measured at 50% Ipeak at 230VAC.
PRODUCT CATALOGUE September 2015 | www.littil.com.au
31
Retail Display
LUNA 25W & 35W Series NEW
33,000 Hr
For new retail or renovations installations. This recessed COB LED downlight is available in 25W and 35W and is a conscious new approach for innovative builders and retail renovators. Direct replacement for the energy consuming 70W150W Metal Halide downlights or 96W PLC fixtures. The 35W is the perfect and common 200mm cutout (8”) found in public buildings and shopping centres. Zero radiation or interference, this high powered lamp is perfect for over display shelving, centre display bench or retail broad space and shopping malls.
Features & Benefits
COB LED array. Beam angle 90°. Available in 25W and 35W. 25W cutout 155 mm. 35W cutout 190-200mm (8”). Up to 30° tilt & 358° rotation through gimbal. White trim, silver can be custom made. External Philips Certadrive lamp driver. Sturdy mechanical clamps. Non-dimmable. 3 year warranty
Specifications* Model
Stock Code
Voltage
Power
Lumen output
CCT
Trim
Face Dimensions (WxH)
RDL35-40S
Custom made
240 VAC
35W
4200 Lm
4000K
Silver
225 x 86 mm
RDL35-40WH
9343907002296
240 VAC
35W
4200 Lm
4000K
White
225 x 86 mm
RDL25-40S
Custom made
240 VAC
25W
3100 Lm
4000K
Silver
172 x 91 mm
RDL25-40WH
9343907002297
240 VAC
25W
3100 Lm
4000K
White
172 x 91 mm
* Technical specifications subject to change without notice.
Driver
Philips Certadrive 30W / 38W
Power Factor
> 0.9
CRI
> 80
IP
IP20
PRODUCT CATALOGUE September 2015 | www.littil.com.au
(IP40 optional)
Notes:
How to order
A little about littil
Options:
Littil Pty Ltd is a leading designer, manufacturer and wholesaler of LED lights in Australia.
1.
Go to the web site, littil.com.au, sign up as a Preferred Trade Customer and place your order online:
2.
Call 1300 699 611 and order over the phone;
3.
Visit the littil Trade Centre at 310 Bay Road, Cheltenham during normal business hours, Monday to Friday.
With more than 5 years of international research, product innovation and sales, littil LED Lights are rapidly becoming the LED light of choice in Australia. Contact littil LED Lights today to become a preferred partner and take advantage of an excellent product, outstanding service and partner pricing you’ll find hard to beat.
PRODUCT CATALOGUE September 2015 | www.littil.com.au
ABN 34 158 561 927 310 Bay Road, Cheltenham Victoria 3192 t +61 3 9908 2888 f +61 3 9908 2889 e
[email protected] w littil.com.au
Littil Products Cat. June 2015 v91
littil Pty Ltd
