Preview only show first 10 pages with watermark. For full document please download

Lkp-skb & Lkp-sar Installation Instructions

   EMBED

Share

Transcript

Rev. 7/14 LKP-SKB & LKP-SAR Installation Instructions The LKP-SKB is a universal adjustable keyboard pole assembly for mounting on vertical surfaces. It features adjustable height with a locking handle and locking articulating arm assembly for connection to the UKBD Universal keyboard tray or other components. 1. Using the hardware provided, install the bottom pole assembly to any vertical surface that allows for convenient use of the keyboard. If the pole height is to be kept the same, the quick-adjust handle can be removed and replaced with the 5/16” bolt provided. 2. The keyboard tray or other component can now be attached to the LKP assembly. The articulating arm allows a wide range of adjustment for either the passenger or the driver and must be locked while driving. Note: Lock-Tite can be added, if desired, to the bolt at the top of the pole assembly to prevent loosening of the bolt. Important Notice: Lund Industries, Inc. has no control of the configuration or dimensions of equipment installed, nor the configuration of vehicles or their air bag deployment zones. Likewise, we have no control over the installation of the Control-Com Consoles and Mounting Systems. The sole responsibility for keeping equipment out of air bag deployment zones is the users. Users are urged to check all installations against the vehicle manufacturer’s definition of their airbag deployment zone. Lund Industries, Inc. assumes no liability for non-compliant installations. SPECIALISTS IN EMERGENCY VEHICLE PRODUCTS SINCE 1978 • DESIGN, MANUFACTURING, DISTRIBUTION AND INSTALLATION