Louvered Products Catalog

Transcript

Louvered Products Catalog Contents Louvers Engineering Guide - Louvers Selecting the Right Louver........................................................ 3 Field Measurement Information............................................... 5 How to Use the Price Nomographs.........................................11 Please reference Price’s Noise Control Catalog for Acoustic Louvers Product Information and Performance Data. Louvers Performance Data How to Use the Price Nomographs.........................................11 Extruded Aluminum Product Overivew.................................................................... 15 Louver Selection Guide........................................................... 15 JE443........................................................................................ 16 Performance Data JE443......................................................... 17 ZE439........................................................................................ 19 Performance Data ZE439......................................................... 20 ZE445........................................................................................ 22 Performance Data ZE445......................................................... 23 DE439........................................................................................ 25 Performance Data DE439........................................................ 26 DE635........................................................................................ 28 Performance Data DE635........................................................ 29 NJE2......................................................................................... 31 Performance Data NJE2.......................................................... 32 NSE1......................................................................................... 34 Performance Data NSE1.......................................................... 35 RSE5......................................................................................... 37 Performance Data RSE5.......................................................... 38 MCJE443.................................................................................. 40 Performance Data MCJE443................................................... 41 MCZE439.................................................................................. 43 Performance Data MCZE439................................................... 44 MCZE445.................................................................................. 46 Performance Data MCZE445................................................... 47 MCDE439.................................................................................. 49 Performance Data MCDE439.................................................. 50 MCDE635.................................................................................. 52 Performance Data MCDE635.................................................. 53 BCJE443................................................................................... 55 Performance Data BCJE443.................................................... 56 BCZE439................................................................................... 58 Performance Data BCZE439.................................................... 59 BCZE445................................................................................... 61 Performance Data BCZE445.................................................... 62 BCDE439................................................................................... 64 Performance Data BCDE439................................................... 65 BCDE635................................................................................... 67 Performance Data BCDE635................................................... 68 Accessories.............................................................................. 70 LOUVERS Suggested Specifications Suggested Specifications ......................................................... 71 Price / Airolite Cross Reference Price / Airolite Cross Reference ................................................ 90 2 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Engineering Guide Selecting the Right Louver When selecting a louver, there are several factors that should be considered: a) Architectural considerations b) Location c) Performance FREE AREA • The minimum area through which air can pass within a louver is called the free area of a louver1. • The free area of a louver is critical to its overall performance and must be considered during its selection process. • The free area has a direct effect on the air velocity though the louver: less free area creates higher air velocities thus a higher pressure drop. For intake conditions, higher air velocities equal higher water penetration. • Everything being relative, this is true for all types and models of louvers. • Whenever free area percentages are used always state the louver size on which it was calculated. (Published free area data is based on 48” X 48” louver) Although it is evident that free area varies with louver size, when a louver is selected for a low height application, the free area drops much faster than expected. This effect is most drastic as the louver height approaches 3 to 4 times the louver depth. Since the head and sill of a louver are of a fixed height, the space they occupy becomes important, thus reducing considerably the amount of available blade face area (and thus free area). As an example, a 48” x 48” x 4” deep louver may have 8.8 sq.ft. of free area (55%), a 48” x 12” of the same model would have 1.5 sq.ft. (37%). As a general rule, avoid selecting a louver when its height is less than 4 times its depth. The actual free area should always be checked when designing a louver below 48” in height. When the louver height exceeds 48”, the percentage of free area will increase slightly. 1 AMCA PUBLICATION 501-93, Application Manual for Air Louvers ENGINEERING GUIDE - LOUVERS a) Architectural considerations: Louvers can be built in multiple sections with visible mullions both vertically and/or horizontally or they can be built in a continuous blade method (CB) offering an uninterrupted blade line. They can also be built into a penthouse with mitered or box corners. b) Location: When louvers or penthouses are installed at ground level where they can be subject to physical abuse, consideration should be given to their structural strength. In these cases, steel or heavy 8 ga. aluminium construction should be considered. c) Performance: When discussing performance, four major topics must be considered: First consideration: © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 3 Louvers Engineering Guide Selecting the Right Louver Second consideration: Third consideration: • Although water penetration data is published based on the AMCA Standard 500 test method, its primary use is for comparison purposes between models and suppliers and of limited use in the design process since wind driven rain is not included. • No accurate method exists at this time to design and select an intake louver based on water penetration. • Experience has shown that selecting an intake louver with a reasonable margin of safety below the Beginning Point of water penetration (as defined by the AMCA Standard 500L) will avoid significant water penetration under severe storm conditions. • Water penetration is not considered on exhaust louvers; the selection is usually based on the permissible pressure drop. • It must be recognized that all louvers (intake and exhaust) will permit some degree of water penetration when exposed to wind driven rain. Floor drains should be provided in the plenum behind the louver. • A new test method that includes wind driven rain was being released by AMCA in 1999 (AMCA Standard 500L1999). • At this time, no test data exists on snow penetration through louvers. • The sizing of a louver for a desired pressure drop and air flow rate is greatly simplified with the unique PRICE NOMOGRAPHS: refer to the appropriate sheet and “How to use PRICE NOMOGRAPHS” for details (see page AA-11).They also permit quick selection based on free area and airflow rate or louver dimensions and free area velocity or any other combination of parameters as a starting point. PRICE NOMOGRAPHS have been prepared for fixed blade and adjustable blade louvers and penthouses. • When installing a damper behind a fixed louver, the total pressure drop can be unpredictable. Use a louver with an integrated damper (combination louver) which is built as a single unit, the performance is tested and predictable. • The pressure drop curves of louvers are based on free area velocity and vary very little, depending almost exclusively on the shape of the air passage between the blades. • Screens can add a pressure drop increase of up to 10%. • Fine mesh screens (insect screens) should always be made easily removable and installed only during critical periods.They must be cleaned regularly to remove dirt and debris. WATER PENETRATION PRESSURE DROP Fourth consideration: WIND LOADS and STRUCTURAL ELEMENTS • As a standard, all PRICE louvers built in a single section are designed to support a 25 psf (100 mph) wind load. • All louvers having 2 sections in width by 2 sections in height or more may require additional structure to support the wind load. • Louvers greater than 72” in width by 2 sections in height or more may require additional structure to support the wind load. • Splice angles used to join sections in height are for alignment purposes only and cannot be considered structural elements. • Since louver blades are welded to the jambs, securing a louver section by its jambs and central blade support, (if used) is considered acceptable practice. ENGINEERING GUIDE - LOUVERS General Selection Guidelines Note for louvers in multiple sections: Louvers built in multiple sections are designed with provisions for thermal expansion and when installed, should never be butted together. When the temperature varies between -35°C to 40°C, the thermal expansion of a 10 ft [3m] aluminium louver is almost ¼” [6mm] (steel louvers expand half this amount). 4 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Engineering Guide Field Measurement Information Once the louvers have been approved by the architect, the louvers can be released for production. Before you can proceed, the opening dimensions must be confirmed.The next step is critical in ensuring that the louver installation will go smoothly: you must make field measurements of the opening and record the job site conditions and any obstructions. Improper information at this point or neglecting to check all the job conditions can have dire consequences later. Step 3. Square and Rectangular Louvers W TOP H H LEFT For this reason PRICE has developed a step by step method to assist you in completing this essential task. Basic principle: The basis of precise field measurements is the use of the principle of triangulation. Once you know the lengths of the three sides of a triangle, that triangle is unique and fully defined. The angles at the corners are no longer required. Thus any shape can be sub-divided into a series of triangles and be precisely defined with the dimensions of their sides. RIGHT W BOTTOM Step #3a: Measure the opening width and height on all 4 sides. B A Step 1. Study the architectural drawings and approved submittal drawings to fully understand how the louvers are intended to be installed on the project, how they are to fit in the openings and how they are to be attached in those openings. Step 2. You can now proceed with the Step #3b: Measure the diagonal distances between opposite corners. opening measurements. Prepare a sketch of each louver viewed from the exterior and identify its location. LEFT SIDE BOW BOTTOM BOW © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. ENGINEERING GUIDE - LOUVERS Step #3c: Use a string to see if the sides of the opening bows in or out. If an inward bow is detected, rectify it if possible. For those that cannot be rectified, record them on your sketch. 5 Louvers Engineering Guide Field Measurement Information Step 4. Right Angle Triangular Louvers Exterior Elevation D D BOW H W BOW 90° W Step #4a: Measure the opening width, height and diagonal side. Based on these dimensions, louver dimensions will be corrected to obtain 90° between width and height. Step #4b: Use a string to see if the sides of the opening bows in or out. If an inward bow is detected, rectify if possible. For those that cannot be rectified, record them on your sketch. Step 5. Common Triangular Louvers Exterior Elevation Note: Dim. A and C are not necessarily equal. C BOW A C B BOW B Step #5b: Use a string to see if the sides of the opening bows in or out. If an inward bow is detected, rectify if possible. For those that cannot be rectified, record them on your sketch. ENGINEERING GUIDE - LOUVERS Step #5a: Measure the 3 sides of the opening. 6 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Engineering Guide Field Measurement Information Step 6. Circular, Semicircular and Ogive Shaped Louvers Exterior Elevations A B C F G A B E H C D I For openings of 72" [1829] or less. Step #6a: If the circular opening is relatively small and has a consistent circumference, you can measure the diameter in 3 or 4 locations and record the smallest dimension. For larger or irregular openings, mark the circular opening in 6 approximately equidistant points on the edge of the opening. Measure the distances A, B, C and the actual distances D through I. By the use of computer assisted drafting (CAD), a true circle will be fitted to the actual opening. Note: Dimensions D through I should be approximately equal to the radius of the circle. Exterior Elevations D D E A B E B F G H C F G H W W Step #6b: Mark the circular portion of the opening in 4 approximately equidistant points on its edge opening. Measure the distances A, B, G, H, W and the actual distances C through F. By the use of computer assisted drafting (CAD), a true circular portion will be fitted to the actual opening. © Copyright Price Industries 2016. Step #6c: Use a string to see if the base of the opening bows in or out. If an inward bow is detected, rectify it if possible. If it cannot be rectified, record it on your sketch. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 7 ENGINEERING GUIDE - LOUVERS A C Louvers Engineering Guide Field Measurement Information Step 7. Louvers Shapes with 2 Vertical Parallel Sides Exterior Elevations D DR DL A WT B HR A HL HL HR B 90° 90° W WB W DT B HR HR A B HL A HL ENGINEERING GUIDE - LOUVERS DB D Step #7a: Divide opening into rectangles and triangles and treat as in Steps #3a through 5b. Based on these dimensions, louver dimensions will be corrected to obtain parallel sides and/or 90° between width and height. 8 Step #7b: Use a string to see if the base of the opening bows in or out. If an inward bow is detected, rectify it if possible. If it cannot be rectified, record it on your sketch. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Engineering Guide Field Measurement Information Step 8. Irregular Shaped Louvers Exterior Elevations A A B Y C F X E G B Y X D Step #8a: After measuring the 3 sides of the opening, draw a horizontal line to establish the blade orientation and measure distance X and Y. C Step #8b: M e a s u r e t h e d i s t a n c e s A t h r o u g h E . Divide shape into simple triangular shapes and measure the remaining distances F and G. Draw a horizontal line to establish the blade orientation and measure distances X and Y. Step #8c: Use a string to see if the base of the opening bows in or out. If an inward bow is detected, rectify it if possible. If it cannot be rectified, record it on your sketch. Section A Section B X © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. ENGINEERING GUIDE - LOUVERS Large shapes divided into sections When a louver shape is divided into sections by visible mullions or when various louver shapes are interdependent and if the blades must line up in the final assembly, always include a sketch of the relative positions of the individual shapes. Section C Y 9 Louvers Engineering Guide Field Measurement Information Louver Undersizing Louver Flanges Structural Support Allowance must always be made in the final sizing of the louver to compensate for the irregularities in the sides of the opening, thermal expansion and caulking. By always giving the actual opening dimensions with a clear indication of nonlinear conditions on the opening edges, proper undersizing can be achieved. This is especially true for louver shapes. As a standard practice, PRICE will manufacture the louvers with a minimum ¼” (6mm) gap all around. If a different gap is preferred be sure to indicate it on your order. Thus, for a 48" by 48" opening without excessive bowing of the sides of the opening, the actual louver size, as manufactured, would be 47.5" by 47.5". Although flanges of various widths are available, the most common flange is 1½”(38mm). The flange width is defined as the width that exceeds the louver frame. Thus, the overall size of a louver with 1½” flanges to fit a 48" x 48" opening would be 50½” by 50½” and would exceed the opening by 1¼”. 48" x 48" opening less undersizing (2 x ¼”) = 47½” x 47½” louver with flanges added (2 x 1½”) = 50½” x 50½” overall When the louver comes in several sections, structural supports must be provided to securely attach these sections to the building. In most cases, these structural elements are installed ahead of time by others and their exact location “as installed” must be verified to ensure that their location matches the louver submittal drawings. If required, changes can be made to relocate the mullions on the louvers before they are put into production with little or no cost. Here are other questions which may have to be addressed: Is there adequate space behind the louver to permit fastening from inside? Are there any structural or other elements that might interfere with the louver? Are the vertical edges of the opening sufficiently rigid to attach the sides of the louver? Sill Extension or Loose Sills ENGINEERING GUIDE - LOUVERS Loose sills or sill extensions are used to deflect rain water away from the sill of the louver towards the exterior of the building. They are designed to maintain a continuous watertight ledge under the louver extending downwards from its backside towards the exterior finished wall. To establish its proper size, measure the distance between the proposed location of the louver face to the finished face of the building, add the overall louver depth plus ¼” [6mm]. In some cases, sill extensions may be shipped in sections; always give the opening width so that sufficient overlap can be allowed for. Louvers in Multiple Sections Louvers built in multiple sections are designed with provisions for thermal expansion and when installed, should never be butted together. When the temperature varies between -35ºC and 40ºC, the thermal expansion of a 10 ft [3m] aluminum louver is almost ¼” [6mm] (steel louvers expand half this amount). 10 Standard Installation Continuous Blade Installation All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum Louvers Performance Data How to Use the Price Nomographs PRICE has developed this unique graphi- cal tool to help you select PRICE louvers without the use of a calculator. All you need is a ruler and a pencil. A multitude of “what if” conditions can be quickly evaluated and the working copy of the nomograph can be retained for future reference. Step 1.To use the PRICE Nomographs, you need to know at least 3 of the following 6 variables: the louver width and height, the louver free area, the air volume, free area air velocity or static pressure loss. The possible starting point combinations are as follows: One louver dimension – flow rate – free area velocity One louver dimension – flow rate - pressure drop One louver dimension – flow rate – free area Two louver dimensions – flow rate Two louver dimensions – pressure drop Two louver dimensions – free area velocity Step 2. The PRICE Nomograph is com- prised of 2 interrelated areas. The dimensional characteristics are on the left side of the sheet and the air flow characteristics are on the right. Drawing a line joining the “Louver Width” (W scale) to the “Louver Height” (H scale), you obtain the free area as the line crosses the “Louver Free Area” (A scale). You can also start with the free area and one dimension to obtain the 2nd dimension. Step 3. Drawing a second line joining LOUVERS the “Louver Free Area” (A scale) (obtained in step 2) to the “Louver Air Flow” (F scale), you obtain the free area velocity and pressure drop as the line crosses the “Pressure drop / Free area velocity” (P-V scale). The line can also be drawn with any combination of 2 starting points: [free area & pressure drop] or [flow rate & pressure drop] or [flow rate & free area velocity]. The PRICE Nomographs give you maximum flexibility in the selection of your PRICE louvers. See the examples on the following page for more details. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 11 Louvers Engineering Guide How to Use the Price Nomographs EXAMPLES: 1. The louver size is 36” wide by 72” high and the required intake air volume is 6,000 CFM. What is the free area, the pressure drop and the free area velocity? a). Draw a line joining 36” wide on the “Louver Width” (W scale) to 72” high on the “Louver Height” (H scale). b). Read the free area at the point where the line meets the “Louver Free Area” (A scale). ANSWERThe louver free area is 10.02 square feet. c). Draw a line joining 6,000 CFM on the “Air Flow” (F scale) to the free area you just found. d). Read the free area velocity and static pressure loss at the point where this second line meets the “Pressure Drop/ Free Area Velocity” (P-V scale). ANSWER The free area air velocity is 600 FPM and louver static pressure loss is 0.06”. 2. The louver exhaust air volume is 6,000 CFM and expected static pressure loss is 0.06”. Louver height must be smaller or equal to 72”.What is the required free area and minimum louver width? a). Apply pressure drop correction factor for exhaust condition 0.06" ÷ 0.825 = 0.07" WG ENGINEERING GUIDE - LOUVERS b). Draw a line joining 6,000 CFM on the “Air Flow” (F scale) to the calculated static pressure loss on the “Pressure Drop/Free Air Velocity” (P-V scale) and continuing to the “Louver Free Area” (A scale). c). Read the free area at the point where the line meets the “Louver Free Area” (A scale). ANSWERThe louver free area is 10.02 square feet. d). Draw a line joining the 72” high on the “Louver Height” (H scale) to the free area and continuing to the “Louver Width” (W scale). For example purposes only. e). Read the required louver width. ANSWER The minimum louver width is 36”. 12 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Product Overview The founding principles of Price have never changed - business integrity, first class service and a commitment to people. Our dependable quality, reliable delivery and knowledgeable follow-up service have made us a market leader in supplying air distribution products and related equipment. As a result of our aggressive research initiatives combined with our continuous improvement practices we are now able to offer a complete and comprehensive line of louver products. Designed and engineered to meet the most demanding applications and specifications. Price’s new louvers offering are designed to be architecturally appealing while providing superior performance. Features and Benefits of Price Louvers: • All welded construction ensures that the louver can withstand the most severe weather conditions while maintaining functionality. • Wide selection of blade styles to meet all demanding architectural and performance specifications. • Extruded aluminum blades and frames provide exceptional durability. • Finished to Price standards. Louver Selection Guide © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. Water Penetration Rating 99.73% Effective 5,200 CFM (147 m3/min) 7,059 CFM (200 m3/min) 5,298 CFM (150 m3/min) 7,589 CFM (215 m3/min) 11,035 CFM (312 m3/min) N/A 380 CFM (11 m3/min) 13 LOUVERS Available With Visible Concealed Louver Blade Frame Free Area Mullion Mullion Depth Thickness Thickness (4' x 4' Unit) Storm Class Louver RSE5 Yes 5" (127 mm) 0.081" (2 mm) 0.081" (2 mm) 39% Extruded Aluminum Architecural JE443 Yes 4" (102 mm) 0.081" (2 mm) 0.081" (2 mm) 51% ZE439 Yes 4" (102 mm) 0.081" (2 mm) 0.081" (2 mm) 52% ZE445 Yes 4" (102 mm) 0.081" (2 mm) 0.081" (2 mm) 50% Extruded Aluminum Drainable DE439 Yes 4" (102 mm) 0.081" (2 mm) 0.081" (2 mm) 54% DE635 Yes 6" (152 mm) 0.081" (2 mm) 0.081" (2 mm) 56% Extruded Aluminum Narrow Profile NSE1 No 1.5" (38 mm) 0.125" (3 mm) 0.064" (1.6 mm) 69% NJE2 No 2" (51 mm) 0.064" (1.6 mm) 0.064" (1.6 mm) 44% Extruded Aluminum JE443 Price Industries certifies that the JE443 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings. Product Information Models Blade Louvers 43° J-Blade JE443 ® Blade Louvers 4" (102 mm) Deep Price JE443 stationary louvers feature alloy 6063-T5 extruded aluminum blades.The louver features a “J” blade profile in a 4” deep assembly with the blades positioned at a 43° angle. This J-blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. JE443 Performances of louvers manufactured by Price are based on tests and procedures in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Rating Program. Features • "J" Blade Profile. • .081” Extruded Aluminum Blades and Frames. • Nominal 50.6% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. LOUVERS Options • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Continuous Blade Sections (invisible mullions). • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. Louver Type Visible Mullion or Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 43o Performance Rating Standard AMCA Standard 500 Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 8.1 sq.ft. Percent Free Area 50.6% Free area velocity at beginning point of water penetration 642 FPM (196 m/min) Air volume delivered at beginning point of water penetration 5200 CFM (147 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.07” H2O (18 Pa) (0.753 sq.m.) Ratings do not include the effect of a bird screen. (1) Beginning point of water penetration is defined by AMCA standard 511 as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. 14 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades JE443 43 Degree J-Blades ® LOUVERS Performance Data Price Industries certifies that the JE443 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings. Ratings do not include the effect of a bird screen. ZE443-060101-0 © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 15 Extruded Aluminum - Fixed Blades JE443 43 Degree J-Blades Architectural Blade Louvers 4" (102 mm) Deep Louver Type Visible Mullion or Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 43˚ Performance Rating Standard AMCA Standard 500 Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 8.1 sq.ft. (0.753 sq.m.) Percent Free Area 50.6% Free Area Velocity at Beginning Point of Water Penetration (1) 642 FPM (196 m/min) Air Volume Delivered at Beginning Point of Water Penetration (1) 5,200 CFM (147 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.07” H2O (18 Pa) Price Industries certifies that the JE443 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings. ® Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. (1) Beginning point of water penetration is defined by AMCA standard 511 as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. Features • • • • • • • • Storm proof blade with rain check. All welded construction: minimum 1” fillet welds. Available in continuous blade construction (CB models). Nominal 51% free area (based on 48” x 48”). Integral perimeter caulking stop. Optional integral 1.5” flanges. Other sizes available as add-ons. Optional bird and insect screens available. Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. LOUVERS ALL-WELDED CONSTRUCTION 16 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum ZE439 Price Industries certifies that the ZE439 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings. Product Information Models Blade Louvers 39° Z-Blade ZE439 ® Blade Louvers 4" (102 mm) Deep Price ZE439 stationary louvers feature alloy 6063-T5 extruded aluminum blades.The louver features a “Z” blade profile in a 4” deep assembly with the blades positioned at a 39° angle.The drainable head and jambs enable the louver to achieve optimum air performance and water penetration ratings. This Z-blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. ZE439 Performances of louvers manufactured by Price are based on tests and procedures in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Rating Program. Features Louver Type Visible Mullion or Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) • Mill finish. Louver Depth 4” (102 mm) Options Blade Angle 39o • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Continuous Blade Sections (invisible mullions). • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. Performance Rating Standard AMCA Standard 500 Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 8.31 sq.ft. (0.772 sq.m.) Percent Free Area 51.9% Free Area Velocity at Beginning Point of Water Penetration (1) 849 FPM (259 m/min) Air Volume Delivered at Beginning Point of Water Penetration (1) 7,059 CFM (200 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.12” H2O (29 Pa) Ratings do not include the effect of a bird screen. Continuous Blade Visible Mullion LOUVERS • "Z" Blade Profile. • .081” Extruded Aluminum Blades and Frames. • Nominal 51.9% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. (1) Beginning point of water penetration is defined by AMCA standard 511 as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 17 Extruded Aluminum - Fixed Blades ZE439 39 Degree Z-Blades ® LOUVERS Performance Data Price Industries certifies that the ZE439 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings. Ratings do not include the effect of a bird screen. JE439-060101-0 18 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades ZE439 39 Degree Z-Blades Architectural Blade Louvers 4" (102 mm) Deep Louver Type Visible Mullion or Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 39˚ Performance Rating Standard AMCA Standard 500 Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 8.31 sq.ft. (0.772 sq.m.) Percent Free Area 51.9% Free Area Velocity at Beginning Point of Water Penetration (1) 849 FPM (259 m/min) Air Volume Delivered at Beginning Point of Water Penetration (1) 7,059 CFM (200 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.12” H2O (29 Pa) Price Industries certifies that the ZE439 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings. ® Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. (1) Beginning point of water penetration is defined by AMCA standard 511 as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. Features • • • • • • • • High performance louver with drainable frame. All welded construction: minimum 1” fillet welds. Available in continuous blade construction (CB models). Nominal 52% free area (based on 48” x 48”). Integral perimeter caulking stop. Optional integral 1.5” flanges. Other sizes available as add-ons. Optional bird and insect screens available. Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. Continuous Blade ALL-WELDED CONSTRUCTION © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. LOUVERS Visible Mullion 19 Extruded Aluminum ZE445 Price Industries certifies that the ZE445 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings. Product Information Models Blade Louvers 45° Z-Blade ZE445 ® Blade Louvers 4" (102 mm) Deep Price ZE445 stationary louvers feature alloy 6063-T5 extruded aluminum blades.The louver features a “Z” blade profile in a 4” deep assembly with the blades positioned at a 45° angle. The drainable head and jambs enable the louver to achieve optimum air performance and water penetration ratings. This Z-blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. ZE445 Performances of louvers manufactured by Price are based on tests and procedures in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Rating Program. Features • "Z" Blade Profile. • .081” Extruded Aluminum Blades and Frames. • Nominal 49.5% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. LOUVERS Options • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Continuous Blade Sections (invisible mullions). • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. Louver Type Visible Mullion or Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 45o Performance Rating Standard AMCA Standard 500 Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 7.92 sq.ft. (0.736 sq.m.) Percent Free Area 49.5% Free Area Velocity at Beginning Point of Water Penetration (1) 669 FPM (204 m/min) Air Volume Delivered at Beginning Point of Water Penetration (1) 5,298 CFM (150 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.09” H2O (23 Pa) Ratings do not include the effect of a bird screen. Continuous Blade Visible Mullion (1) Beginning point of water penetration is defined by AMCA standard 511 as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. 20 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades ZE445 45 Degrees Z-Blade ® LOUVERS Performance Data Price Industries certifies that the ZE445 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings. Ratings do not include the effect of a bird screen. JE445-060101-0 © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 21 Extruded Aluminum - Fixed Blades ZE445 45 Degrees Z-Blade Architectural Blade Louvers 4" (102 mm) Deep Louver Type Visible Mullion or Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 45o Performance Rating Standard AMCA Standard 500 Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 7.92 sq.ft. (0.736 sq.m.) Percent Free Area 49.5% Free Area Velocity at Beginning Point of Water Penetration (1) 669 FPM (204 m/min) Air Volume Delivered at Beginning Point of Water Penetration (1) 5,298 CFM (150 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.09” H2O (23 Pa) Price Industries certifies that the ZE445 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings. ® ZE445 Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. (1) Beginning point of water penetration is defined by AMCA standard 511 as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. Features • • • • • • • All welded construction: minimum 1” fillet welds. Available in continuous blade construction (CB models). Nominal 50% free area (based on 48” x 48”). Integral perimeter caulking stop. Optional integral 1.5” flanges. Other sizes available as add-ons. Optional bird and insect screens available. Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. LOUVERS ALL-WELDED CONSTRUCTION 22 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum DE439 Price Industries certifies that the DE439 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings. Product Information Models Blade Louvers 39° Blade DE439 ® Blade Louvers 4" (102 mm) Deep Price DE439 stationary drainable louvers feature alloy 6063-T5 extruded 4” aluminum blades positioned at a 39° angle. The drainable louvers achieve optimum air performance and water penetration ratings with vertical and horizontal gutter systems that capture droplets before they cascade from blade to blade and are entrained in the airstream. This louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. DE439 Performances of louvers manufactured by Price are based on tests and procedures in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Rating Program. Features • .081” Extruded Aluminum Blades and Frames. Louver Type Visible Mullion or Continuous Blade • Nominal 53.6% free area (based on 48”x 48”). Material Extruded Aluminum (Alloy 6063-T5) • Integral perimeter caulking stop. Stationary Blade .081” (2 mm) • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. Frame .081” (2 mm) Louver Depth 4” (102 mm) • Mill finish. Blade Angle 39o Performance Rating Standard AMCA Standard 500 Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 8.57 sq.ft. (0.796 sq.m.) • Welded Construction. Options • Extended Sill (loose) 14 GA. Aluminum. • Continuous Blade Sections (invisible mullions). Percent Free Area 53.6% • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. Free Area Velocity at Beginning Point of Water Penetration (1) 886 FPM (270 m/min) • Variety of Mounting options. Air Volume Delivered at Beginning Point of Water Penetration (1) 7,589 CFM (215 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.13” H2O (3 Pa) • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. LOUVERS • Drainable Blade. Ratings do not include the effect of a bird screen. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. (1) Beginning point of water penetration is defined by AMCA standard 511 as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 23 Extruded Aluminum - Fixed Blades DE439 Drainable 39 Degree Blades ® LOUVERS Performance Data Price Industries certifies that the DE439 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings Ratings do not include the effect of a bird screen. DE439-060101-0 24 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades DE439 Drainable 39 Degree Blades Architectural Blade Louvers 4" (102 mm) Deep Louver Type Visible Mullion or Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 39o Performance Rating Standard AMCA Standard 500 Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 8.57 sq.ft. (0.796 sq.m.) Percent Free Area 53.6% Free Area Velocity at Beginning Point of Water Penetration (1) 886 FPM (270 m/min) Air Volume Delivered at Beginning Point of Water Penetration (1) 7,589 CFM (215 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.13” H2O (3 Pa) Price Industries certifies that the DE439 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings and water penetration ratings ® DE439 Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. (1) Beginning point of water penetration is defined by AMCA standard 511 as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. Features • Drainable blade with vertical jamb gutter. • All welded construction: minimum 1” fillet welds. • Available in continuous blade construction (CB models). • Nominal 54% free area (based on 48” x 48”). • Integral perimeter caulking stop. • Optional integral 1.5” flanges. Other sizes available as add-ons. • Optional bird and insect screens available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. LOUVERS ALL-WELDED CONSTRUCTION © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 25 Extruded Aluminum DE635 Price Industries certifies that the DE635 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings. Product Information Models Blade Louvers 35° Blade DE635 Blade Louvers 6" (152 mm) Deep Price DE635 stationary drainable louvers feature alloy 6063-T5 extruded 6” aluminum blades positioned at a 35° angle. The drainable louvers achieve optimum air performance and water penetration ratings with vertical and horizontal gutter systems that capture droplets before they cascade from blade to blade and are entrained in the airstream. This louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. DE635 Performances of louvers manufactured by Price are based on tests and procedures in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Rating Program. Features LOUVERS • Drainable Blade. • Welded Construction. • .081” Extruded Aluminum Blades and Frames. • Nominal 55.9% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. Louver Type Visible Mullion or Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 6” (152 mm) • Mill finish. Blade Angle 35o Options Performance Rating Standard AMCA Standard 500L Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 8.95 sq.ft. (0.831 sq.m.) Percent Free Area 55.9% Free Area Velocity at Beginning Point of Water Penetration (1) 1,233 FPM (375 m/min) Air Volume Delivered at Beginning Point of Water Penetration (1) 11,035 CFM (312 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.17” H2O (42 Pa) • Extended Sill (loose) 14 GA. Aluminum. • Continuous Blade Sections (invisible mullions). • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. Ratings do not include the effect of a bird screen. (1) Beginning point of water penetration is defined by AMCA standard 511 as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. 26 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades DE635 Price Industries certifies that the DE635 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings Drainable 35 Degree Blades Performance Data 1233 FPM LOUVERS Louver test size: 48" x 48" (1219 x 1219 mm) Standard Air Density: 0.075 lbs/ft3 Tested to AMCA Fig. 5.5 Ratings do not include the effect of a bird screen. DE635-060101-0 © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 27 Extruded Aluminum - Fixed Blades DE635 Drainable 35 Degree Blades Architectural Blade Louvers 6" (152 mm) Deep Louver Type Visible Mullion or Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 6” (152 mm) Blade Angle 35o Performance Rating Standard AMCA Standard 500L Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 8.95 sq.ft. (0.831 sq.m.) Percent Free Area 55.9% Free Area Velocity at Beginning Point of Water Penetration (1) 1,233 FPM (375 m/min) Air Volume Delivered at Beginning Point of Water Penetration (1) 11,035 CFM (312 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.17” H2O (42 Pa) Price Industries certifies that the DE635 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program The AMCA Certified Seal applies to air performance ratings. DE635 Blade Louvers 6" (152 mm) Deep Ratings do not include the effect of a bird screen. (1) Beginning point of water penetration is defined by AMCA standard 511 as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. Features • • • • • • • • Drainable blade with vertical jamb gutter. All welded construction: minimum 1” fillet welds. Available in continuous blade construction (CB models). Nominal 56% free area (based on 48” x 48”). Integral perimeter caulking stop. Optional integral 1.5” flanges. Other sizes available as add-ons. Optional bird and insect screens available. Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. LOUVERS ALL-WELDED CONSTRUCTION 28 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum NJE2 Product Information Models Blade Louvers 30° J-Blade NJE2 Blade Louvers 2" (51 mm) Deep Price NJE2 stationary louvers feature alloy 6063-T5 extruded aluminum blades. The louver features a “J” blade profile in a 2” deep assembly with the blades positioned at a 30° angle. This J-blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. NJE2 Features • "J" Blade Profile. • .064” Extruded Aluminum Blades and Frames. • Nominal 44.1% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. Options • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Continuous Blade Sections (invisible mullions). • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .064” (1.6 mm) Frame .064” (1.6 mm) Louver Depth 2” (51 mm) Blade Angle 30o Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 7.06 sq.ft. (0.656 sq.m.) Percent Free Area 44.1% Free Area Velocity at Beginning Point of Water Penetration (1) 380 FPM (116 m/min) Air Volume Delivered at Beginning Point of Water Penetration (1) 2,682 CFM (76 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.03” H2O (6 Pa) 2" (51) LOUVERS Ratings do not include the effect of a bird screen. (1) Beginning point of water penetration is defined as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 29 Extruded Aluminum - Fixed Blades NJE2 30 Degree J-Blades LOUVERS Performance Data Ratings do not include the effect of a bird screen. NZE2-060101-0 30 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades NJE2 30 Degree J-Blades Architectural Blade Louvers 2" (51 mm) Deep Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .064” (1.6 mm) Frame .064” (1.6 mm) Louver Depth 2” (51 mm) Blade Angle 30o Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 7.06 sq.ft. (0.656 sq.m.) Percent Free Area 44.1% Free Area Velocity at Beginning Point of Water Penetration (1) 380 FPM (116 m/min) Air Volume Delivered at Beginning Point of Water Penetration (1) 2,682 CFM (76 m3/min) Pressure Drop at Beginning Point of Water Penetration (1) 0.03” H2O (6 Pa) NJE2 Blade Louvers 2" (51 mm) Deep Ratings do not include the effect of a bird screen. (1) Beginning point of water penetration is defined as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. 2" (51) Features • Storm proof blade with rain check. • All welded construction: minimum 1” fillet welds. • Nominal 44% free area (based on 48” x 48”). • Optional flanges up to 4” available. • Optional bird and insect screens available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. LOUVERS ALL-WELDED CONSTRUCTION © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 31 Extruded Aluminum NSE1 Product Information Models Blade Louvers Straight Blade NSE1 Blade Louvers 1.5" (38 mm) Deep Price NSE1 stationary louvers feature alloy 6063-T5 extruded aluminum blades. The louver features a straight blade profile in a 1.5” deep assembly. This straight blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. NSE1 Features • .125” Extruded Aluminum Blades. • Nominal 69.3% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. Options • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Continuous Blade Sections (invisible mullions). • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .125” (3 mm) Frame .064” (1.6 mm) Louver Depth 1.5” (38 mm) Blade Angle 29° Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 11.09 sq.ft. (1.03 sq.m.) Percent Free Area 69.3% Free Area Velocity at Beginning Point of Water Penetration (1) N/A Air Volume Delivered at Beginning Point of Water Penetration (1) N/A Pressure Drop at Beginning Point of Water Penetration (1) N/A LOUVERS Ratings do not include the effect of a bird screen. (1) Beginning point of water penetration is defined as the free area velocity at which 0.01 ounces of water per square foot of free area is measured to pass through a 4' x 4' louver during a 15 minute test. 32 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades NSE1 Straight Blades LOUVERS Performance Data Ratings do not include the effect of a bird screen. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 33 Extruded Aluminum - Fixed Blades NSE1 Straight Blades Narrow Profile Louvers 1.5" (38 mm) Deep Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .125” (3 mm) Frame .064” (1.6 mm) Louver Depth 1.5” (38 mm) Blade Angle 29° Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ Unit 11.09 sq.ft. (1.03 sq.m.) Percent Free Area 69.3% Free Area Velocity at Beginning Point of Water Penetration (1) N/A Air Volume Delivered at Beginning Point of Water Penetration (1) N/A Pressure Drop at Beginning Point of Water Penetration (1) N/A NSE1 Blade Louvers 1.5" (38 mm) Deep Ratings do not include the effect of a bird screen. Features • • • • Nominal 69% free area (based on 48” x 48”). Optional flanges up to 4” available. Optional bird and insect screens available. Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. LOUVERS ALL-WELDED CONSTRUCTION 34 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum RSE5 Product Information Models Blade Louvers 39° Blade RSE5 Blade Louvers 5" (127 mm) Deep Price RSE5 stationary drainable louvers feature alloy 6063-T5 extruded aluminum. The drainable louvers achieve optimum air performance and water penetration ratings with vertical and horizontal gutter systems that capture droplets before they cascade from blade to blade and are entrained in the airstream. This louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. Features RSE5 • Drainable Blade. • .081” Extruded Aluminum Blades and Frames. • Nominal 38.5% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. Options Louver Type: Storm Class • Welded Construction. Material: Extruded Aluminum (Alloy 6063-T5) • Extended Sill (loose) 14 GA. Aluminum. Front Blade: 0.081" (2.06mm) • Continuous Blade Sections (invisible mullions). Back Blade: N/A Frame: 0.081" (2.06mm) • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. Louver Depth: 5" (127.0mm) Water Penetration Test: Simulated Rain % Free Area: 38.5% Free Area – 4' x 4' Unit: 6.16 sq. ft. (0.572 sq m) • Variety of Bird Screens, Insect Screens and Frames available. Ext Wind Velocity: 29.1 mph (13 m/s) Rainfall Rate: 2.95"/H (75 ml/H) • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. Effectiveness Ratio: 99.73% • Variety of Mounting options. • Exterior or Interior Frame Mounting. Ratings do not include the effect of a bird screen. • Select from PRICE Colour Chart or provide colour sample to match. © Copyright Price Industries 2016. LOUVERS • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 35 Extruded Aluminum - Fixed Blades RSE5 Drainable Blades LOUVERS Performance Data Ratings do not include the effect of a bird screen. RSE5-060101-0 36 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades RSE5 Drainable Blades Acoutiscal Louvers 5" (127 mm) Deep Louver Type: Storm Class Material: Extruded Aluminum (Alloy 6063-T5) Front Blade: 0.081" (2.06mm) Back Blade: N/A Frame: 0.081" (2.06mm) Louver Depth: 5" (127.0mm) Water Penetration Test: Simulated Rain % Free Area: 38.5% Free Area – 4' x 4' Unit: 6.16 sq. ft. (0.572 sq m) Ext Wind Velocity: 29.1 mph (13 m/s) Rainfall Rate: 2.95"/H (75 ml/H) Effectiveness Ratio: 99.73% RSE5 Blade Louvers 5" (127 mm) Deep Ratings do not include the effect of a bird screen. Features • Drainable Blade. • .081” Extruded Aluminum Blades and Frames. • Nominal 39% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame • Mill finish. LOUVERS ALL-WELDED CONSTRUCTION © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 37 Extruded Aluminum MCJE443 Product Information Models Blade Louvers 43° J-Blade MCJE443 Blade Louvers 4" (102 mm) Deep Price MCJE443 stationary louvers feature alloy 6063-T5 extruded aluminum blades. The louver features a “J” blade profile in a 4” deep assembly with the blades positioned at a 43° angle. This J-blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. MCJE443 Features • "J" Blade Profile. • .081” Extruded Aluminum Blades and Frames. • Nominal 50.6% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. • Continuous Blade Sections (invisible mullions). Options Louver Type Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 43o Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ x 50.625" Unit 28.00 sq.ft. (2.601 sq.m.) Percent Free Area 41.5% 4" (102) 38 Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height For performance information, please refer to page 3. Flashing & Curb By Others LOUVERS • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. Outside Penthouse Dimension (Inside Penthouse Dimension + 12" (305)) Curb Inside Curb Dimension © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades MCJE443 43 Degree J-Blades LOUVERS Performance Data © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 39 Extruded Aluminum - Fixed Blades MCJE443 43 Degree J-Blades Acoutiscal Louvers 4" (102 mm) Deep Louver Type Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 43o Wind Load 25 psf (100 mph) Free Area – 4’ x 4’ x 50.625" Unit 28.00 sq.ft. (2.601 sq.m.) Percent Free Area 41.5% MCJE443 Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. Features • Storm proof blade with rain check. • Unique bolted corner design affords excellent alignment of adjoining louver • Designed for snow load up to 50 psf (2,394 Pa), consult your local representative for higher loading. • All welded construction: minimum 1” fillet welds. • Nominal 42% free area (based on 48” x 48” x 50.625"). • Optional bird and insect screens available. • Optional insulated roof and roof curbs are available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height ALL-WELDED CONSTRUCTION Curb Inside Curb Dimension LOUVERS Flashing & Curb By Others Outside Penthouse Dimension (Inside Penthouse Dimension + 12" (305)) 40 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum MCZE439 Product Information Models Blade Louvers 39° Z-Blade MCZE439 Blade Louvers 4" (102 mm) Deep Price MCZE439 stationary louvers feature alloy 6063-T5 extruded aluminum blades. The louver features a “Z” blade profile in a 4” deep assembly with the blades positioned at a 39° angle.The drainable head and jambs enable the louver to achieve optimum air performance and water penetration ratings. This Z-blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. MCZE439 Features • "J" Blade Profile. • .081” Extruded Aluminum Blades and Frames. • Nominal 49.1% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. • Continuous Blade Sections (invisible mullions). Options Louver Type Continuous Blade • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 39˚ Wind Load 25 psf (100 mph) Free Area – 48’ x 48’ x 49.438 Unit 32.35 sq.ft. (3.005 sq.m.) Percent Free Area 49.1% 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height For performance information, please refer to page 4 Curb Inside Curb Dimension LOUVERS Flashing & Curb By Others Outside Penthouse Dimension (Inside Penthouse Dimension + 12" (305)) © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 41 Extruded Aluminum - Fixed Blades MCZE439 39 Degree Z-Blades LOUVERS Performance Data 42 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades MCZE439 39 Degree Z-Blades Mitered Corners Penthouse 4" (102 mm) Deep Louver Type Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 39o Wind Load 25 psf (100 mph) Free Area – 48’ x 48’ x 49.438 Unit 32.35 sq.ft. (3.005 sq.m.) Percent Free Area 49.1% MCZE439 Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. Features • Unique bolted corner design affords excellent alignment of adjoining louver. • Drain holes at top blade corners. • Designed for snow load up to 50 psf (2,394 Pa), consult your local representative for higher loading. • All welded construction: minimum 1” fillet welds. • Nominal 49% free area (based on 48” x 48” x 49.438"). • Optional bird and insect screens available. • Optional insulated roof and roof curbs are available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height Flashing & Curb By Others Curb Inside Curb Dimension LOUVERS ALL-WELDED CONSTRUCTION Outside Penthouse Dimension (Inside Penthouse Dimension + 12" (305)) © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 43 Extruded Aluminum MCZE445 Product Information Models Blade Louvers 39° Z-Blade MCZE445 Blade Louvers 4" (102 mm) Deep Price MCZE445 stationary louvers feature alloy 6063-T5 extruded aluminum blades. The louver features a “Z” blade profile in a 4” deep assembly with the blades positioned at a 45° angle.The drainable head and jambs enable the louver to achieve optimum air performance and water penetration ratings. This Z-blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. MCZE445 Features • "Z" Blade Profile. • .081” Extruded Aluminum Blades and Frames. • Nominal 40.8% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Continuous Blade Sections (invisible mullions). • Mill finish. Options Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 45o Wind Load 25 psf (100 mph) Free Area – 48" x 48" x 50.625" Unit 27.51 sq.ft. (2.556 sq.m.) Percent Free Area 40.8% 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height For performance information, please refer to page 5 Flashing & Curb By Others Outside Penthouse Dimension (Inside Penthouse Dimension + 12" (305)) Curb Inside Curb Dimension LOUVERS • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. Louver Type 44 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades MCZE445 45 Degree Z-Blades LOUVERS Performance Data © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 45 Extruded Aluminum - Fixed Blades MCZE445 45 Degree Z-Blades Mitered Corners Penthouse 4" (102 mm) Deep Louver Type Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 45o Wind Load 25 psf (100 mph) Free Area – 48" x 48" x 50.625" Unit 27.51 sq.ft. (2.556 sq.m.) Percent Free Area 40.8% MCZE445 Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. Features • Unique bolted corner design affords excellent alignment of adjoining louver. • Designed for snow load up to 50 psf (2,394 Pa), consult your local representative for higher loading. • All welded construction: minimum 1” fillet welds. • Nominal 41% free area (based on 48” x 48” x 50.625"). • Optional bird and insect screens available. • Optional insulated roof and roof curbs are available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height Flashing & Curb By Others Curb Inside Curb Dimension LOUVERS ALL-WELDED CONSTRUCTION Outside Penthouse Dimension (Inside Penthouse Dimension + 12" (305)) 46 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum MCDE439 Product Information Models Blade Louvers 39° Blade MCDE439 Blade Louvers 4" (102 mm) Deep Price MCDE439 stationary drainable louvers feature alloy 6063-T5 extruded 4” aluminum blades positioned at a 39° angle. The drainable louvers achieve optimum air performance and water penetration ratings with vertical and horizontal gutter systems that capture droplets before they cascade from blade to blade and are entrained in the airstream. This louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. MCDE439 Features • Drainable Blade. • .081” Extruded Aluminum Blades and Frames. • Nominal 49.1% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Continuous Blade Sections (invisible mullions). • Mill finish. Louver Type Continuous Blade Options Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 39o Wind Load 25 psf (100 mph) Free Area – 48" x 48" x 49.438" Unit 32.35 sq.ft. (3.005 sq.m.) Percent Free Area 49.1% • Extended Sill (loose) 14 GA. Aluminum. • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height For performance information, please refer to page 6. Flashing & Curb By Others Outside Penthouse Dimension (Inside Penthouse Dimension + 12" (305)) Curb Inside Curb Dimension LOUVERS • Welded Construction. 6" (152) • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 47 Extruded Aluminum - Fixed Blades MCDE439 Drainable 39 Degree Blades LOUVERS Performance Data 48 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades MCDE439 Drainable 39 Degree Blades Miterred Corners Penthouse 4" (102 mm) Deep Louver Type Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 39o Wind Load 25 psf (100 mph) Free Area – 48" x 48" x 49.438" Unit 32.35 sq.ft. (3.005 sq.m.) Percent Free Area 49.1% MCDE439 Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. Features • Unique bolted corner design affords excellent alignment of adjoining louver. • Drainable blades with drain holes at corners. • Designed for snow load up to 50 psf (2,394 Pa), consult your local representative for higher loading. • All welded construction: minimum 1” fillet welds. • Nominal 49% free area (based on 48” x 48” x 49.438"). • Optional bird and insect screens available. • Optional insulated roof and roof curbs are available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height Flashing & Curb By Others Outside Penthouse Dimension (Inside Penthouse Dimension + 12" (305)) Curb Inside Curb Dimension LOUVERS ALL-WELDED CONSTRUCTION 6" (152) © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 49 Extruded Aluminum MCDE635 Product Information Models Blade Louvers 35° Blade MCDE635 Blade Louvers 6" (152 mm) Deep Price MCDE635 stationary drainable louvers feature alloy 6063-T5 extruded 6” aluminum blades positioned at a 35° angle. The drainable louvers achieve optimum air performance and water penetration ratings with vertical and horizontal gutter systems that capture droplets before they cascade from blade to blade and are entrained in the airstream. This louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. MCDE635 Features • Drainable Blade. • .081” Extruded Aluminum Blades and Frames. • Nominal 49.2% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Continuous Blade Sections (invisible mullions). • Mill finish. Options Louver Type Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 6” (152 mm) Blade Angle 35o Wind Load 25 psf (100 mph) Free Area – 48" x 48" x 50.25" Unit 32.97 sq.ft. (3.063 sq.m.) Percent Free Area 49.2% 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height Outside Penthouse Dimension (Inside Penthouse Dimension + 16" (406)) For performance information, please refer to page 7. Flashing & Curb By Others Curb Inside Curb Dimension LOUVERS • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. 50 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades MCDE635 Drainable 35 Degree Blades LOUVERS Performance Data © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 51 Extruded Aluminum - Fixed Blades MCDE635 Drainable 35 Degree Blades Mitered Corners Penthouse 4" (102 mm) Deep Louver Type Continuous Blade Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 6” (152 mm) Blade Angle 35o Wind Load 25 psf (100 mph) Free Area – 48" x 48" x 50.25" Unit 32.97 sq.ft. (3.063 sq.m.) Percent Free Area 49.2% MCDE635 Blade Louvers 6" (152 mm) Deep Ratings do not include the effect of a bird screen. Features • Unique bolted corner design affords excellent alignment of adjoining louver. • Drainable blades with drain holes at corners. • Designed for snow load up to 50 psf (2,394 Pa), consult your local representative for higher loading. • All welded construction: minimum 1” fillet welds. • Nominal 49% free area (based on 48” x 48” x 49.438"). • Optional bird and insect screens available. • Optional insulated roof and roof curbs are available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height Flashing & Curb By Others Curb Inside Curb Dimension LOUVERS ALL-WELDED CONSTRUCTION Outside Penthouse Dimension (Inside Penthouse Dimension + 16" (406)) 52 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum BCJE443 Product Information Models Blade Louvers 43° J-Blade BCJE443 Blade Louvers 4" (102 mm) Deep Price BCJE443 stationary louvers feature alloy 6063-T5 extruded aluminum blades. The louver features a “J” blade profile in a 4” deep assembly with the blades positioned at a 43° angle. This J-blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. BCJE443 Features • "J" Blade Profile. • .081” Extruded Aluminum Blades and Frames. • Nominal 49.4% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. Options • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 43o Wind Load 25 psf (100 mph) Free Area – 4" x 4" x 4" Unit 31.59 sq.ft. (2.935 sq.m.) Percent Free Area 49.4% 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height Outside Penthouse Dimension (Inside Curb Dim. + 8" (203)) For performance information, please refer to page 3. Curb Curb Mounting Straps Inside Curb Dimension LOUVERS Flashing & Curb By Others © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 53 Extruded Aluminum - Fixed Blades BCJE443 43 Degree J-Blades LOUVERS Performance Data 54 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades BCJE443 43 Degree J-Blades Box Corners Penthouse 4" (102 mm) Deep Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 43o Wind Load 25 psf (100 mph) Free Area – 4" x 4" x 4" Unit 31.59 sq.ft. (2.935 sq.m.) Percent Free Area 49.4% BCJE443 Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. Features • Storm proof blade with rain check. • Positive locking corner joiner mounts from exterior. • Slip-on corner cover requires no screws. • Designed for snow load up to 50 psf (2,394 Pa), consult your local representative for higher loading. • All welded construction: minimum 1” fillet welds. • Nominal 49% free area (based on 48” x 48” x 48”). • Optional bird and insect screens available. • Optional insulated roof and roof curbs are available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height Outside Penthouse Dimension (Inside Curb Dim. + 8" (203)) Flashing & Curb By Others Curb Curb Mounting Straps Inside Curb Dimension LOUVERS ALL-WELDED CONSTRUCTION © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 55 Extruded Aluminum BCZE439 Product Information Models Blade Louvers 39° Z-Blade BCZE439 Blade Louvers 4" (102 mm) Deep Price BCZE439 stationary louvers feature alloy 6063-T5 extruded aluminum blades. The louver features a “Z” blade profile in a 4” deep assembly with the blades positioned at a 39° angle.The drainable head and jambs enable the louver to achieve optimum air performance and water penetration ratings. This Z-blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. BCZE439 Features • "Z" Blade Profile. • .081” Extruded Aluminum Blades and Frames. • Nominal 55.3% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. Options Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 39o Wind Load 25 psf (100 mph) Free Area – 4" x 4" x 4" Unit 35.40 sq.ft. (3.29 sq.m.) Percent Free Area 55.3% For performance information, please refer to page 4. LOUVERS • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. 56 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades BCZE439 39 Degree Z-Blades LOUVERS Performance Data © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 57 Extruded Aluminum - Fixed Blades BCZE439 39 Degree Z-Blades Box Corners Penthouse 4" (102 mm) Deep Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 39o Wind Load 25 psf (100 mph) Free Area – 4" x 4" x 4" Unit 35.40 sq.ft. (3.29 sq.m.) Percent Free Area 55.3% BCZE439 Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. Features • Storm proof blade with rain check. • Positive locking corner joiner mounts from exterior. • Slip-on corner cover requires no screws. • Designed for snow load up to 50 psf (2,394 Pa), consult your local representative for higher loading. • All welded construction: minimum 1” fillet welds. • Nominal 55% free area (based on 48” x 48” x 48”). • Optional bird and insect screens available. • Optional insulated roof and roof curbs are available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. LOUVERS ALL-WELDED CONSTRUCTION 58 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum BCZE445 Product Information Models Blade Louvers 39° Z-Blade BCZE445 Blade Louvers 4" (102 mm) Deep Price BCZE445 stationary louvers feature alloy 6063-T5 extruded aluminum blades. The louver features a “Z” blade profile in a 4” deep assembly with the blades positioned at a 45° angle.The drainable head and jambs enable the louver to achieve optimum air performance and water penetration ratings. This Z-blade louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. BCZE445 Features • "Z" Blade Profile. • .081” Extruded Aluminum Blades and Frames. • Nominal 49.8% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. Options Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 45o Wind Load 25 psf (100 mph) Free Area – 4" x 4" x 4" Unit 31.84 sq.ft. (2.96 sq.m.) Percent Free Area 49.8% 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height Outside Penthouse Dimension (Inside Curb Dim. + 8" (203)) For performance information, please refer to page 5. Flashing & Curb By Others Curb Curb Mounting Straps Inside Curb Dimension LOUVERS • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 59 Extruded Aluminum - Fixed Blades BCZE445 45 Degree Z-Blades LOUVERS Performance Data 60 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades BCZE445 45 Degree Z-Blades Box Corners Penthouse 4" (102 mm) Deep Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 45o Wind Load 25 psf (100 mph) Free Area – 4" x 4" x 4" Unit 31.84 sq.ft. (2.96 sq.m.) Percent Free Area 49.8% BCZE445 Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. Features • Positive locking corner joiner mounts from exterior. • Slip-on corner cover requires no screws. • Designed for snow load up to 50 psf (2,394 Pa), consult your local representative for higher loading. • All welded construction: minimum 1” fillet welds. • Nominal 50% free area (based on 48” x 48” x 48”). • Optional bird and insect screens available. • Optional insulated roof and roof curbs are available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. 4" (102) Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Penthouse Height Flashing & Curb By Others Outside Penthouse Dimension (Inside Curb Dim. + 8" (203)) Curb Curb Mounting Straps Inside Curb Dimension LOUVERS ALL-WELDED CONSTRUCTION © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 61 Extruded Aluminum BCDE439 Product Information Models Blade Louvers 39° Blade BCDE439 Blade Louvers 4" (102 mm) Deep Price BCDE439 stationary drainable louvers feature alloy 6063-T5 extruded 4” aluminum blades positioned at a 39° angle. The drainable louvers achieve optimum air performance and water penetration ratings with vertical and horizontal gutter systems that capture droplets before they cascade from blade to blade and are entrained in the airstream. This louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. BCDE439 Features • Drainable Blade. • .081” Extruded Aluminum Blades and Frames. • Nominal 55.3% free area (based on 48” x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. Options • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 39o Wind Load 25 psf (100 mph) Free Area – 4" x 4" x 4" Unit 35.40 sq.ft. (3.289 sq.m.) Percent Free Area 55.3% For performance information, please refer to page 6. LOUVERS • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. 62 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades BCDE439 Drainable 39 Degree Blades LOUVERS Performance Data © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 63 Extruded Aluminum - Fixed Blades BCDE439 Drainable 39 Degree Blades Box Corners Penthouse 4" (102 mm) Deep Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 4” (102 mm) Blade Angle 39o Wind Load 25 psf (100 mph) Free Area – 4" x 4" x 4" Unit 35.40 sq.ft. (3.289 sq.m.) Percent Free Area 55.3% BCDE439 Blade Louvers 4" (102 mm) Deep Ratings do not include the effect of a bird screen. Features • Drainable blade with vertical jamb gutter. • Positive locking corner joiner mounts from exterior. • Slip-on corner cover requires no screws. • Designed for snow load up to 50 psf (2,394 Pa), consult your local representative for higher loading. • All welded construction: minimum 1” fillet welds. • Nominal 55% free area (based on 48” x 48” x 48”). • Optional bird and insect screens available. • Optional insulated roof and roof curbs are available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. LOUVERS ALL-WELDED CONSTRUCTION 64 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum BCDE635 Product Information Models Blade Louvers 35° Blade BCDE635 Blade Louvers 6" (152 mm) Deep Price BCDE635 stationary drainable louvers feature alloy 6063-T5 extruded 6” aluminum blades positioned at a 35° angle. The drainable louvers achieve optimum air performance and water penetration ratings with vertical and horizontal gutter systems that capture droplets before they cascade from blade to blade and are entrained in the airstream. This louver is available with visible mullions that are joined with an extruded aluminum “I” connection, or continuous horizontal blades that utilize concealed blade braces and hidden vertical supports in place of jamb frames to present uninterrupted horizontal blade appearance. BCDE635 Features • Drainable Blade. • .081” Extruded Aluminum Blades and Frames. • Nominal 57.5% free area (based on 48”x 48”). • Integral perimeter caulking stop. • 1/2" x 1/2" (12 x 12) 16 gauge Expanded Aluminum Bird Screen without frame. • Mill finish. Options • Welded Construction. • Extended Sill (loose) 14 GA. Aluminum. • Blank-offs are available in Aluminum with or without Insulation. Insulation is available in 1”, 1.5”, 2”, or 3” thickness. • Variety of Mounting options. • Exterior or Interior Frame Mounting. • Variety of Bird Screens, Insect Screens and Frames available. • Wide variety of Finishes: Baked Enamel, Prime Coat, Custom Finishes, Clear Anodized and Colour Anodized. • Select from PRICE Colour Chart or provide colour sample to match. • Note: Colour variations can be expected within the same order and even on the same louver due to the anodizing process. Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 6” (152 mm) Blade Angle 35o Wind Load 25 psf (100 mph) Free Area – 4" x 4" x 4" Unit 36.83 sq.ft. (3.422 sq.m.) Percent Free Area 57.5% 6" (152) Penthouse Height For performance information, please refer to page 7. Outside Penthouse Dimension (Inside Curb Dim. + 8" (203)) Curb Mounting Straps Curb Inside Curb Dimension LOUVERS Flashing & Curb By Others Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 65 Extruded Aluminum - Fixed Blades BCDE635 Drainable 35 Degree Blades LOUVERS Performance Data 66 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Extruded Aluminum - Fixed Blades BCDE635 Drainable 35 Degree Blades Box Corners Penthouse 6" (152 mm) Deep Louver Type Visible Mullion Material Extruded Aluminum (Alloy 6063-T5) Stationary Blade .081” (2 mm) Frame .081” (2 mm) Louver Depth 6” (152 mm) Blade Angle 35˚ Wind Load 25 psf (100 mph) Free Area – 4" x 4" x 4" Unit 36.83 sq.ft. (3.422 sq.m.) Percent Free Area 57.5% BCDE635 Blade Louvers 6" (152 mm) Deep Ratings do not include the effect of a bird screen. Features • Drainable blade with vertical jamb gutter. • Positive locking corner joiner mounts from exterior. • Slip-on corner cover requires no screws. • Designed for snow load up to 50 psf (2,394 Pa), consult your local representative for higher loading. • All welded construction: minimum 1” fillet welds. • Nominal 58% free area (based on 48” x 48” x 48”). • Optional bird and insect screens available. • Optional insulated roof and roof curbs are available. • Optional Duracron, Duranar and Duranar-XL baked enamel finish as per our standard color chart or any custom color. 6" (152) Penthouse Height Flashing & Curb By Others Sectionned Roof with Standing Seams on Sizes Greater than 45" x 93" (1143 x 2362) Outside Penthouse Dimension (Inside Curb Dim. + 8" (203)) Curb Mounting Straps Curb Inside Curb Dimension LOUVERS ALL-WELDED CONSTRUCTION © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 67 Louvers Accessories Louver Accessories Bird Screen Insect Screen Bird screens are ½” (12.7mm), ¾” (19.1mm) or 1: (25.4mm) mesh, 0.063” (1.60mm) diameter screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screens are available in expanded aluminum and expanded aluminum with frame construction. Gauges available – 051, 16 and 19 ga. Available for interior or exterior mounting. Insect screens are 18 x 16 (1.4 x 1.6 mm) mesh, 0.012" (0.30mm) diameter screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screens are available in aluminum or bronze construction. Gauges available - 051, 16 and 19 ga. Available for interior or exterior mounting. Blank-offs Formed Metal Sill The extruded polystyrene insulation is factory mounted with panel screws. Loose sill is available in 4” to 10” widths in 14-gauge aluminum construction. For single sections, the length of the sill must be equal to the opening width, with a maximum section length of 120” (3048mm). For multiple sections, the minimum recommended overlap is 6” (152mm) with a sealant in between (minimum ¼” bead). • Aluminum blank-off panels – available with or without insulation LOUVERS Insulated blank-off panels available in 1”, 1-½”, 2” and 3” insulation thickness. • Gauges available  14 and 18 ga. (Aluminum construction only) 68 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Accessories LOUVERS Formed Metal Sill © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 69 Louvers Accessories LOUVERS Standard / Multi-Section Insulated Blank-Offs with Thermal Breaks, Vertical Splicing 70 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Accessories LOUVERS Field Assembly Multi-Section Installation Screens / Blank-Offs, Vertical Splicing © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 71 Louvers Suggested Specifications Louvers JE443 J-Blade Stationary Louver Furnish and install PRICE Model JE443 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 43-degree stationary “J” profile blades. Louver performance shall be based on tests and procedures in accordance with AMCA publication 511 and comply with the requirements of the AMCA Certified Rating Program. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options LOUVERS Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. 72 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Suggested Specifications Louvers ZE439 Z-Blade Stationary Louver Furnish and install PRICE Model ZE439 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 39-degree stationary “Z” profile blades. Louver performance shall be based on tests and procedures in accordance with AMCA publication 511 and comply with the requirements of the AMCA Certified Rating Program. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options LOUVERS Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 73 Louvers Suggested Specifications Louvers ZE445 Z-Blade Stationary Louver Furnish and install PRICE Model JE445 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 45-degree stationary “Z” profile blades. Louver performance shall be based on tests and procedures in accordance with AMCA publication 511 and comply with the requirements of the AMCA Certified Rating Program. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options LOUVERS Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. 74 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Suggested Specifications Louvers DE439 Drainable Louver Furnish and install PRICE Model DE439 Drainable Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 39-degree stationary drainable blades. Louver performance shall be based on tests and procedures in accordance with AMCA publication 511 and comply with the requirements of the AMCA Certified Rating Program. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil. Colour shall be Price (specify colour name). Options LOUVERS Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 75 Louvers Suggested Specifications Louvers DE635 Drainable Louver Furnish and install PRICE Model DE635 Drainable Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 6” (152.4mm) deep with 35-degree stationary drainable blades. Louver performance shall be based on tests and procedures in accordance with AMCA publication 511 and comply with the requirements of the AMCA Certified Rating Program. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable Ushaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. 76 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Suggested Specifications Louvers NJE2 J-Blade Stationary Louver Furnish and install PRICE Model NSE2 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 2” (51.6mm) deep with 30-degree stationary “J” profile blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 77 Louvers Suggested Specifications Louvers NSE1 Straight Blade Stationary Louver Furnish and install PRICE Model NSE1 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 1.5” (38.1mm) deep with stationary straight profile blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil. Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. 78 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Suggested Specifications Louvers RSE5 Drainable Louver Furnish and install PRICE Model RSE5 Drainable Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 5” (127mm) deep with stationary drainable blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil. Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 79 Louvers Suggested Specifications Louvers MCJE443 J-Blade Miter Corner Penthouse Louver Furnish and install PRICE Model MCJE443 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 43-degree stationary “J” profile blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. 80 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Suggested Specifications Louvers MCZE439 Z-Blade Miter Corner Penthouse Louver Furnish and install PRICE Model MCZE439 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 39-degree stationary “Z” profile blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 81 Louvers Suggested Specifications Louvers MCZE445 Z-Blade Miter Corner Penthouse Louver Furnish and install PRICE Model MCZE445 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 45-degree stationary “Z” profile blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. 82 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Suggested Specifications Louvers MCDE439 Drainable Blade Miter Corner Penthouse Louver Furnish and install PRICE Model MCDE439 Drainable Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 39-degree stationary drainable blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil. Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 83 Louvers Suggested Specifications Louvers MCDE635 Drainable Blade Miter Corner Penthouse Louver Furnish and install PRICE Model MCDE635 Drainable Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 6” (152.4mm) deep with 35-degree stationary drainable blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. 84 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Suggested Specifications Louvers BCJE443 J-Blade Box Corner Penthouse Louver Furnish and install PRICE Model BCJE443 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 43-degree stationary “J” profile blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 85 Louvers Suggested Specifications Louvers BCZE439 Z-Blade Box Corner Penthouse Louver Furnish and install PRICE Model BCZE439 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 39-degree stationary “Z” profile blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. 86 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Suggested Specifications Louvers BCZE445 Z-Blade Box Corner Penthouse Louver Furnish and install PRICE Model BCZE445 Architectural Blade Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 45-degree stationary “Z” profile blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 87 Louvers Suggested Specifications Louvers BCDE439 Drainable Blade Box Corner Penthouse Louver Furnish and install PRICE Model DE439 Drainable Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 4” (101.6mm) deep with 39-degree stationary drainable blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil. Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. 88 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016. Louvers Suggested Specifications Louvers BCDE635 Drainable Blade Box Corner Penthouse Louver Furnish and install PRICE Model DE635 Drainable Louver of size and shape indicated on the plans and/or as described in schedules. Louvers shall be constructed entirely of extruded aluminum, alloy 6063-T5. Blades and frames shall be minimum 0.081” (2.06mm) wall thickness. Louver assemblies shall be 6” (152.4mm) deep with 35-degree stationary drainable blades. Louvers shall be designed to withstand a 25 psf (100 mph wind equivalent) wind load. Each louver shall be fitted with 1/2" (12.7mm) mesh x 0.063" (1.60mm) diameter aluminum bird screen. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Louvers shall be supplied with a standard mill finish. If an optional finish is required, please select one of the following: • Louvers shall be factory primed and finished-after-assembly with a baked enamel resin coating in a colour selected from the colour chart. Primer and resin coating shall be oven baked at 450°F in accordance with the coating manufacturers instructions. • Louvers shall receive a Class 2 (clear) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.4 - 0.7 mil. • Louvers shall receive a Class 1 (colour) anodize finish complying with AAMA 611-98. Finish is applied to chemically etched and pretreated aluminum to a minimum thickness of 0.7 - 1.0 mil.Colour shall be Price (specify colour name). Options Each louver shall be fitted with {select required mesh size: 1/2” (12.7mm), 3/4” (19.1mm) or 1” (25.4mm)} mesh x 0.063” (1.60mm) diameter aluminum bird screen in non-rewirable U-shaped frames for permanently securing screen mesh. Bird screen shall be expanded aluminum construction and suitable for {specify: interior or exterior} mounting. Each louver shall be fitted with 18 x 16 (1.4 x 1.6mm) mesh, 0.012” (0.03mm) diameter aluminum insect screen in non-rewirable U-shaped frames for permanently securing screen mesh. Insect screen shall be suitable for {specify: interior or exterior} mounting. Louvers shall be welded construction. Louvers shall be supplied with a flanged frame. Louvers shall be supplied with continuous blade section to give the appearance of invisible mullions. LOUVERS Each louver shall be fitted with an (insulated or non-insulated) aluminum blank-off panel. © Copyright Price Industries 2016. All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. 89 Louvers Price / Airolite Cross Reference Price Airolite JE443 K638X ZE439 K609HP ZE445 K609X DE439 K6774X DE635 K6776X NJE2 T6382X NSE1 AC5O5X RSE5 SCH5X MCJE443 MC909-638X MCZE439 MC909-609HP MCZE445 M6909-609X MCDE439 MC909-6774X MCDE635 MC909-6776X BCJE443 K909-638X BCZE439 K909-609HP BCZE445 K909-609X BCDE439 K909-6774X LOUVERS BCDE635 K909-6776X 90 All Metric dimensions ( ) are soft conversion. Imperial dimensions are converted to metric and rounded to the nearest millimetre. © Copyright Price Industries 2016.