Transcript
Ceramic
Low Pass Filter 50Ω
LFCG-92+
DC1 to 990 MHz
Features • Low loss, 0.4 dB typ. • Small size 0805 (2.0 x 1.25 mm) • Temperature stable • LTCC construction
CASE STYLE: GE0805C-2
+RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications
Applications
e and Reel Available Tapra cost at no ext
• Harmonic Rejection • VHF/UHF transmitters / receivers • lab use
Reel Size 7”
Devices/Reel 20, 50, 100, 200, 500,1000, 4000
Electrical Specifications1,2 at 25°C Parameter
40
Pass Band
Stop Band
Rejection Loss
20 1 2
3 1
F6
F5 F1 F2 F3 F4 FREQUENCY
Functional Schematic R F IN
Min.
Typ.
Max.
Unit
DC - 990 1400 DC - 990 1700 1800 - 2700 5000
— — — — 30 —
0.4 3.0 1.45 30 40 50
0.8 — — — — —
dB dB :1 dB dB dB
Maximum Ratings Operating Temperature Storage Temperature RF Power Input*
-55°C to +100°C -55°C to +100°C 2W at 25°C
*Passband rating, derate linearly to 1W at 100°C ambient Permanent damage may occur if any of these limits are exceeded.
Typical Performance Data at 25°C
R F OUT
Frequency (MHz)
Insertion Loss (dB)
10 20 100 500 700 990 1400 1500 1700 1800 2000 2500 2700 3000 3500 4000 5000
Top View
70
Pad Connections Input Output Ground Isolate (Do not ground)
Frequency (MHz)
8 4 1,3,5,7 2,6
VSWR (:1)
0.06 0.08 0.11 0.34 0.35 0.44 2.18 8.83 32.78 40.59 35.16 55.61 50.94 43.62 41.69 43.14 60.95
LFCG-92+ INSERTION LOSS
150
60
1.03 1.02 1.11 1.44 1.32 1.22 1.90 9.15 46.32 62.15 78.35 117.43 116.94 128.23 125.95 130.99 139.99
LFCG-92+ VSWR
120
50 40
VSWR
DC
F# DC - F1 F2 DC - F1 F3 F4 - F5 F6
In Application where DC voltage is present at either input or output port, coupling capacitors are required. Measured on Mini-Circuits Characterization Test Board TB-800+
INSERTION LOSS (dB)
ATTENUATION (dB)
Specification Definition
Insertion Loss Freq. cut-off VSWR
30 20
90 60
30
10 0
0 0 1000 2000 3000 4000 5000 0 1000 2000 3000 4000 Notes FREQUENCY A. Performance and quality attributes and conditions not expressly stated in this specification document(MHz) are intended to be excluded and do not form a part of this specification document. (MHz) B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria andFREQUENCY measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
5000 REV. A M151107 ED-16419/27 LFCG-92+ MY/CP/AM 150813 Page 1 of 2
LFCG-92+
Low Pass Filter
Demo Board MCL P/N: TB-800+ Suggested PCB Layout (PL-427)
Outline Drawing PCB Land Pattern
Suggested Layout, Tolerance to be within ±.002
Pad Connections Input Output Ground Isolate (Do not ground)
8 4 1,3,5,7 2,6
Outline Dimensions ( inch mm ) A .079 2.01
B .049 1.24
C .037 0.94
D .014 0.36
E .012 0.30
H .025 0.64
J .134 3.40
K .104 2.64
L 0.014 0.36
M .039 0.99
F .012 0.30
G .026 0.66 wt grams .008
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits Notes contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. please Mini-Circuits’ website at specification www.minicircuits.com/MCLStore/terms.jsp B. Electrical specifications andvisit performance data contained in this document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
Page 2 of 2
