Transcript
Ceramic
Low Pass Filter 50Ω
LFCN-800
DC(1) to 800 MHz
Features
Maximum Ratings Operating Temperature
-55°C to 100°C
Storage Temperature
-55°C to 100°C
RF Power Input*
9W max. at 25°C
* Passband rating, derate linearly to 4W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded.
CASE STYLE: FV1206
• excellent power handling, 9W • small size • 5 sections • temperature stable • LTCC construction
and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200, 500,1000, 3000
Reel Size 7”
Applications
Pin Connections RF IN
1
RF OUT
3
• harmonic rejection • VHF/UHF transmitters/receivers • lab use
GROUND 2,4
Electrical Specifications(1,2) at 25°C
Outline Drawing
Parameter
(ON TOP)
Pass Band
Stop Band
(ON TOP)
Insertion Loss Freq. Cut-Off VSWR Rejection Loss VSWR
F#
Frequency (MHz)
Min.
Typ.
Max.
Unit
DC-F1 F2 DC-F1 F3 F4-F5 F6
DC-800 990 DC-800 1400 1500-2000 4500
— — — 20 — —
— 3.0 1.2 — 30 20
1.3 — — — — —
dB dB :1 dB dB dB
F3-F6
1400-4500
—
20
—
:1
(1) In Application where DC voltage is present at either input or output ports, coupling capacitors are required. Alternatively, if DC pass IN-OUT
is required, Mini-Circuits’ “D” suffix version of this model will support DC IN-OUT, and provide>100 MOhm isolation to ground. (2) Measured on Mini-Circuits Characterization Test Board TB-270.
Typical Frequency Response ATTENUATION (dB)
PCB Land Pattern
Electrical Schematic R F IN
40
R F OUT
20
3 1
DC
F5 F1 F2 F3 F4 FREQUENCY
F6
Typical Performance Data at 25°C
Suggested Layout, Tolerance to be within ±.002
Frequency (MHz)
Outline Dimensions ( inch mm ) A .126 3.20
B .063 1.60
C .037 0.94
D .020 0.51
E .032 0.81
F .009 0.23
G .169 4.29
H .087 2.21
J .024 0.61
K .122 3.10
L .024 0.61
M .087 2.21
N .012 0.30
P wt .071 grams 1.80 .020
Demo Board MCL P/N: TB-270 Suggested PCB Layout (PL-137)
Insertion Loss (dB)
10.00 100.00 800.00 990.00 1030.00
VSWR (:1)
0.06 0.14 0.85 3.87 5.38
1.01 1.07 1.41 4.47 6.39
1330.00 1400.00 1500.00 1635.00 1785.00
20.50 24.29 30.05 40.35 52.35
39.49 48.26 52.65 59.91 66.82
2000.00 3000.00 3500.00 4500.00 5000.00
39.14 31.57 30.42 27.52 25.04
72.39 86.86 69.49 62.05 42.38
LFCN-800 INSERTION LOSS
LFCN-800 VSWR
1000
50 40
100
VSWR
INSERTION LOSS (dB)
60
30 20
10
10 0
1
0
1000
2000
3000
4000
5000
0
1000
FREQUENCY (MHz)
2000
3000
4000
5000
FREQUENCY (MHz)
Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
REV. M M158161 LFCN-800 ED-9913/1 AD/RS/CP/AM 160920
