Preview only show first 10 pages with watermark. For full document please download

Low Pim Jumper, Test, And System Cables

   EMBED

Share

Transcript

Low PIM Jumper, Test, and System Cables M I C R O W AV E S RG401(J) - 250 Type COMMON SPECIFICATIONS Frequency: DC -6000 MHz 160 dBc (PCS Band) Passive Intermodulation (PIM): Measurements made in the 800, 1800, and 2100 bands Return Loss(Except Right Angle): 25 dB MIN, DC - 4 GHz 0.24 dB/m @ 1 GHz Insertion Loss: 0.36 dB/m @ 2 GHz 30 mm single Minimum Bend Radius: 120 mm multiple 410 Watts @ 1 GHz RF Power: Cable Type: 300 Watts @ 2 GHz RG401, Type 250 hot tin dipped low PIM supplied with FEP jacket (.270 dia) Shielding: 100 dBc Temperature: -65 to 165 0C RF Impedance: 50 Ω Typical Part Number CBL-XXFT-XX-401JBB RoHS Compliant CABLE LENGTHS ARE MADE TO ORDER LENGTH CABLE DESIGNATOR ADDED CABLE BOOT (OPTIONAL) FOR ADDITIONAL SUPPORT CABLE TYPE CONNECTOR ID J = Jacket B = CABLE BOOT (PER TABLE BELOW) (OPTIONAL) Available Connectors: 7-16 DIN Male Straight ADDED TUBING FOR SUPPORT WILL VARY BY CABLE LENGTH 7-16 DIN Male Right Angle Type N Male Straight (NM) 7-16 DIN Male Straight (DM) XX FT DM DMRA 4.1-9.5 DIN Male Mini DM41 4.3-10.0 DIN Male Mini DM43 7-16 DIN Female 7-16 DIN Female Right Angle Type N Male Straight CBL-XXFT-DMNM-401JBB Connector ID DF DFRA NM Type N Male Right Angle NMRA Type N Female Straight NF Type N Female Right Angle NFRA Typical Popular Models Type N Male Right Angle (NMRA) MODEL: 7-16 DIN Male Right Angle (DMRA) 1 FT CBL-1FT-DMRANMRA-401J DM-NM CBL-XXFT-NMNM-401JBB NM-NM CBL-XXFT-DMDM-401J DM-DM CBL-XXFT-DFNF-401J 4.1-9.5 MiniDIN Male (DM41) 7-16 DIN Male (DM) 12 FT CBL-12FT-DM41DM-401J R&D Microwaves LLC, 301 Rockaway Valley Road, Boonton, NJ 07005 USA Tel. 908.212.1696 www.rdmicrowaves.com email: [email protected] Rev 1.2 03/20/15 CONNECTORS: CBL-XXFT-DMNM-401JBB DF-NF