Transcript
Model: LCR-1216
Lowell Credenza Rack Description: The welded credenza rack is a versatile, low-height and shallow-depth rack that’s engineered specifically for mounting electronics into credenza style cabinetry, under counters and other built-in or freestanding rackmount applications. The 19"W EIA rack is precision formed and fully welded to provide rugged support, torsional rigidity and labor saving field installation. The rack is symmetrically engineered with a universal top and bottom that is fabricated from 14-gauge certified US steel. Top and bottom have a 12"W x 9"D opening, 1/4" diameter hole in each corner and slots left and right for anchoring/positioning. Front and rear corner post rails are 11-gauge steel tapped 10-32 on EIA spacing. Rack also has side openings that can be used as hand-grips for lifting rack into position. Following installation, side openings can be used for cable and wire management. Corner post rails are punched on sides to facilitate clean wire tie-off and bundling. Durable, semi-gloss black powder epoxy finish. Features: • Rugged, all-welded frame with 14 ga. steel top and bottom for exceptional support of mounted electronics. • Narrow overall width (19.25") and shallow depth (16") uses minimal space to house and protect 19”W equipment. • 11ga. steel corner posts are tapped 10-32 (front & rear). • Ships ready-to-install for labor saving, trouble-free field installation. • Made in the USA. A & E Specifications: The open-frame rack for built-in or stand-alone applications shall be Lowell welded credenza rack Model LCR-1216. The overall dimensions shall be 19.25"W x 23"H x 16"D. The rack shall be built to EIA standards for mounting 19" wide electronics. It shall be fully welded, certified US steel construction with 14-gauge top / bottom and 11-gauge corner post rails tapped 10-32. It shall have vertical panel space mounting of 12U (21.125"). It shall include openings for wire management and anchoring. Finish shall be semigloss black powder epoxy enamel.
Model No.
Description
LCR-1216
Lowell Credenza Rack
Rack Units*
Overall Depth
Former No.
Panel Space
Overall Height
Overall Width
12U
16"
LCR21
21.125"
23"
19.25"
*One rack unit = 1.75"
Spec. No. 1008 (rev. 11.10.10) pg. 1 of 1
©2010 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660 Fax— 636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)
Floor Racks
Model: LCR-1216
Lowell Credenza Rack
Seismic-certified Racks
Top / Bottom View hole hole 1/4” .25"dia.dia.
slots
VARI-RACK™
9.00" 9.00
Adjustment Adjustment slots
Portable Racks
16.00" 16.00
12.00" 12.00
Wall-mount Racks
Top / Bottom
Side View
19.25" 19.25
3.50" 3.50
18.313"C/L C/L 18.313 17.813 17.813"
2.25" 2.25 23.00" 23.00
4.00" 4.00
.938" .938
Side
Rack Options
Front / Rear
Credenza & Desk Racks
1.50" 1.50
.719" .719
21.125" 21.125
Pull-out Racks
Front / Rear View
RACKWARE™ Cable Mgmt.
Spec. No. 1008 (rev. 11.10.10) pg. 2 of 2
©2010 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660 Fax— 636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)
Thermal Mgmt.
All measurements are inches.
