Transcript
TimbreMill LP10 Series Specifications
LP10 Series Loudspeaker Specifications
Specifications, configurations, and options are subject to change at anytime without notice
1
TimbreMill LP10 Series Specifications
TimbreMill LP10 Low Profile Series Loudspeakers Overview •
The TimbreMill LP10 low profile loudspeaker is a compact, weatherized, rugged, extremely versatile, high-‐quality 3-‐way MTM loudspeaker.
•
The LP10 is built using the finest Baltic Birch available. All surfaces are treated with an all-‐weather coating that seals and protects the enclosure from moisture and the elements. The outside dimensions of the LP10 were not created by accident; they are truck pack “magic numbers” that allow for the maximum utilization of space and ease of loading.
• •
The LP10 is constructed with a substantial amount of internal bracing. The quality of the design and construction makes the enclosure incredibly rugged and rigid. Even when being driven at full bandwidth/level there are almost no detectable vibrations on any of the side panels eliminating virtually all unwanted acoustic artifacts from any of its faces.
•
One of the significant benefits of the LP10 bracing design is the excellent off-‐axis performance. The off-‐axis/rear sound is exceptionally smooth and natural sounding. The greatly attenuated and controlled off axis response dramatically increases the gain before feedback making the LP10 an excellent choice for stage use around the pickiest of performers and engineers.
•
Sound quality, imaging/sound stage, linearity, and wide/accurate bandwidth enable the LP10 to reproduce sound in a true to life presentation. The LP10 reproduces studio/mastering-‐lab quality sound at extreme output levels in all weather conditions. It is a very pleasant non ear-‐fatiguing speaker to listen to at all SPL levels.
•
TimbreMill Loudspeakers are assembled by hand in the USA to ISO-‐9001 standards. Quality is assured throughout every stage of manufacturing. Every loudspeaker produced is individually inspected and tested before it is shipped. The testing includes Transfer Function measurements of every loudspeaker guaranteeing it is within extremely tight tolerance to the “golden reference” unit. No speaker is ever shipped that is out of approved specification range.
•
TimbreMill offers a five-‐year manufacturing warranty for our enclosures, a two-‐year warranty for our amplifiers, and a one-‐year limited warranty for our drivers.
•
LP10 uses include: concert PA systems mains and/or front fills, theaters, stage, front-‐of-‐ house/monitor mix position reference monitors, under balconies, parade floats, dance clubs, houses of worship, recording studios, mastering labs, theme parks, cruise ships, touring, rentals, fixed installations, ultra high-‐end/impact residential audiophile and theater systems.
Specifications, configurations, and options are subject to change at anytime without notice
2
TimbreMill LP10 Series Specifications
Configurations LP10-‐P The LP10-‐P is the standard configuration of the LP10 series. It is a professional high output 2,500 Watt powered low profile weatherized loudspeaker. The standard color is black however custom colors are available. LP10-‐NP The LP10 series loudspeakers require our amplifiers. We understand that some users prefer to locate the amplifiers in equipment rooms. The LP10-‐NP replaces the standard plate amplifier on the loudspeaker enclosure with a connector plate. The amplifier is provided as a 2-‐space rack mount unit. The rack mount version of the amplifier has identical specifications to that of the LP10-‐P. LP10-‐P48 The LP10-‐P48 offers the same quality and virtually identical performance as the LP10-‐P (depending on the input voltage) but is powered by a 48~72-‐Volt DC only version of the same amplifier. At 48VDC the amplifier can swing the full range of it’s output capability however the crest factor/headroom is limited. This is perfect for prerecorded music reproduction, and some live applications. Increasing the input voltage to 60VDC allows for reasonable crest factor/headroom for live performance reinforcement. At 72VDC the amplifier preforms exactly as its AC counterparts. Important Note: Great care should be taken not to exceed 72VDC in any circumstances. Some uses for the LP10-‐P48 version include: Parade Floats, Mobile Audio Systems, Theme Park Ride Vehicles, and Green Events. LP10-‐PSM The LP10-‐PSM is the Studio/Audiophile version of the LP10-‐P. The amplifier and input module for this model are designed specifically for ultra-‐low noise floor operation and critical listening environments.
Specifications, configurations, and options are subject to change at anytime without notice
3
TimbreMill LP10 Series Specifications
Specifications Performance Frequency Response • 54Hz ~ 22kHz +/-‐3dB – Full Range Mode (DSP Button OUT) • 48Hz -‐10dB • 120Hz ~ 22kHz +/-‐3dB – Crossover Mode (DSP Button IN) • 90˚ Static Lobe Crossover Design -‐ for both operational modes. The LP10 has a static lobe in full range mode and is also perfectly matched with the FHS-‐01 subwoofer. If mounted in a [FHS-‐01] [LP10] [FHS-‐01] configuration the 90˚ static lobe crossover creates a large MTM configuration for exceptional pattern control across all frequencies. Sound Pressure Level • 127dB SPL at 1m – Full Range Mode (DSP Button OUT) • 133dB SPL at 1m – Crossover Mode (DSP Button IN) Physical Drivers • LF Subsystem: o 2x 10” Neodymium • MF/HF Subsystem: o 1x Coaxial Neodymium Compression Driver: 3.5” MF and 1.75” HF • Crossover points: 800Hz, 6300kHz • High Pass: 54Hz Full Range Mode, 120Hz Crossover Mode Horn • •
110˚(H) x 40˚(V) Coverage Angles The LP10’s proprietary wooden horn is specially designed to eliminate the “harsh” direct on-‐axis sound common to many horn loaded loudspeakers. This horn provides exceptional pattern control, smooth and even coverage in tonality and seamlessly matches the pattern and low pass of the LF section.
Dimensions [Inches] • 12H x 32W x 22.5D Weight • Pounds: 102 • Kilograms: 46.2 Rigging and Portability • 16x M10X1.5 Rigging Points o 4 Top, 4 Bottom, 4 Left, 4 Right • 1x Rear M10X1.5 Tilt Point o Note: The rear tilt point shall be used to tilt only one speaker • 2x Recessed hand holds
Specifications, configurations, and options are subject to change at anytime without notice
4
TimbreMill LP10 Series Specifications Electrical Audio and DSP • 2x Transformer isolated balanced XLR connectors o 1-‐Male and 1-‐Female for direct analog loop-‐through • Sensitivity +4 dBV • Max Input Level+24 dBV • Input Impedance 35K ohm • Two DSP programs user selectable by button push (read on power-‐up). [Button IN] crossover mode for use with (FHS-‐01) subwoofer, [Button OUT] full-‐range mode for standalone operation Amplifier (Standard Plate and LP10-‐NP 2RU Rack version) • UL and CE listed • User-‐selectable DSP presets for different operational configurations • Thermostat controlled fan (normally off) o The fan is not required or included in the LP10-‐PSM configuration • >90% Efficiency Output Power • 3-‐Channel 2,500 Watt Class D Amplifier • 1,000w-‐LF1, 1,000w-‐LF2, 500w-‐MF/HF Input Power Options • 90 ~ 132 VAC, 190 ~ 265VAC (LP10-‐P, LP10-‐NP, and LP10-‐PSM Versions) • 48 ~ 72 VDC (DC Powered Option – LP10-‐P48) o 48 ~ 60 VDC Preferred, 72 VDC Max Power Consumption • 25 Watts • 395 Watts • 1,200 Watts
Idle Typical Usage Maximum
Weatherization – All Versions • Weatherized for outdoor use • Stainless steel grill and all hardware • Hydrophobic mesh and foam between the grill and drivers • Weather-‐treated drivers • Coated and sealed wooden enclosure • Built-‐in drainage path to help evacuate any water that might get into the enclosure • Amplifier/connector plate recessed and angled • Amplifier/connector plate protective cover with cable passage tube (optional) • “Mud Flap” supplemental amplifier/connector plate protection system (optional)
Specifications, configurations, and options are subject to change at anytime without notice
5
