Transcript
LIGHTPLANE 9 SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE 9 Page 1 of 5 TYPE: Specification and Ordering Information: 1. Style:
LP9-L - Suspended (LP9-L) LP9-S - Suspended Square (LP9-S) LP-W - Wall Mount (LP9-W) LP9-V - Vertical Wall (LP9-V) LP9-WH - Horizontal Wall mount LP9-WH)
2. Overall Run Length: Specify total run length (skip for Wall and Square specification) 3. Downlight: MR16: 1x 50 Watt MR16 Halogen (MR16) AR111: 1 x 50/75 Watt AR111 Halogen (AR111) PAR30: 1 x 50/75 Watt Par 30 Halogen (PAR30) S08220: 1 x 22 Watt CDM20 TM BT-5 (S08220) S08235: 1 x 35 Watt CDM35 TM BT-5 (S08235) S11139: 1 x 39 Watt CDM35 TC-T4 (S11139) S11170: 1 x 70 Watt CDM70 TC-T4 (S11170) GX1020: 1 x 20 Watt CMH20/MR16 (GX1020) GX1039: 1 x 39 Watt CMH39/MR16 (GX1039) G2T5 - 2 x 28 Watt F28T5 Fluorescent (G2T5) G2T5HO - 2 x 54 Watt F54T5HO Fluorescent (G2T5HO) G2T5LENS - 2 x 28 Watt F28T5 Fluorescent (G2T5LENS) G2T5HOLENS - 2 x 54 Watt F54T5HO Fluorescent (G2T5HOLENS) G1HP7LENS - HP7 LED Module, 7W/LF 80LPW, 28W, 48” Module (G2HP7LENS) 3000k 3500k 4000k G2T5BLADE - 2 x 14 Watt F14T5 Fluorescent (G2T5BLADE) G2T5HOBLADE - 2 x 24 Watt F24T5HO Fluorescent (G2T5HOBLADE) PAR2039: 1 x 39 Watt CDM35/PAR20 (PAR2039) PAR3039: 1 x 39 Watt CDM35/PAR30L (PAR3039) PAR3070: 1 x 70 Watt CDM70/PAR30L (PAR3070) R11135: 1 x 35 Watt CDM-R111/35 (R11135) MPLEX - Multiplex LED Module (MPLEX) - SEE Diagram 1A. emitter
color
power
cooling
(30w only)
optic
beam
Lens CZEN 3000k 15w Passive Reflector Active 3500k 20w XSM80 30w 4000k XSM95 CZEN = Citizen LED Chip with Zhaga connector XSM = Xicato LED Module
20 deg 40 deg 60 deg
*CZEN7: Citizen® 1 x 7.6W Watt LED Module, 820LM, 80CRI, 3000K (CZEN7) *CZEN7DIM: Citizen® 1 x 7.6W Watt LED Module, TRIAC Dimming, 820LM, 80CRI, 3000K (CZEN7DIM) *CZEN7-H: Citizen® 1 x 7.6W Watt LED Module, Lutron® A Series Dimming, 820LM, 80CRI, 3000K (CZEN7-H) *CZEN10: Citizen® 1 x 10W Watt LED Module, 1000LM, 80CRI, 3000K (CZEN10) *CZEN10DIM: Citizen® 1 x 10W Watt LED Module, TRIAC Dimming, 1000LM, 80CRI, 3000K (CZEN10DIM) *CZEN10-H: Citizen® 1 x 10W Watt LED Module, Lutron® Hilume A Series Dimming, 1000LM, 80CRI, 3000K (CZEN10-H) *CZEN15: Citizen® 1 x 15W Watt LED Module, 1050LM, 80CRI, 3000K (CZEN15) *CZEN15-0-10V: Citizen® 1 x 15W Watt LED Module, 0-10V Dimming, 1050LM, 80CRI, 3000K (CZEN15-0-10V) *CZEN15-H: Citizen® 1 x 15W Watt LED Module, Lutron® A Series Dimming, 1050LM, 80CRI, 3000K (CZEN15-H) *CZEN20: Citizen® 1 x 20W Watt LED Module, 1200LM, 80CRI, 3000K (CZEN20) *CZEN20-0-10V: Citizen® 1 x 20W Watt LED Module, 0-10V Dimming, 1200LM, 80CRI, 3000K (CZEN20-0-10V) *CZEN20-H: Citizen® 1 x 20W Watt LED Module, Lutron® Hilume A Series Dimming, 1100LM, 80CRI, 3000K (CZEN20-H) *CZEN30: Citizen® 1 x 30W Watt LED Module, 2000LM, 80CRI, 3000K (CZEN30) *CZEN30-0-10V: Citizen® 1 x 30W Watt LED Module, 0-10V Dimming, 2000LM, 80CRI, 3000K (CZEN30-0-10V) *CZEN30-H: Citizen® 1 x 30W Watt LED Module, Lutron® Hilume A Series Dimming, 2000LM, 80CRI, 3000K (CZEN30-H) *LED1525: Edison® 1 x 15 Watt LED 25° 3000K (LED1525) *LED1525-0-10V: Edison® 1 x 15 Watt LED, 0-10V Dimming, 540LM, 25° 3000K (LED1525-0-10V) *LED1525-H: Edison® 1 x 15 Watt LED, 0-10V Dimming, 540LM, 25° 3000K (LED1525-H) *LED1540: Edison® (1 x 15 Watt LED, 40° 3000K , 540LM 3500K (LED1540) *LED1540-0-10V: Edison® 1 x 15 Watt LED, 0-10V Dimming, 540LM, 40° 3000K (LED1540-0-10V) *LED1540-H: Edison® 1 x 15 Watt LED, 0-10V Dimming, 540LM, 25° 3000K (LED1540-H) *No Accessory Options Available **Denotes Additional Cooling Mechanism (Synjet Fan) required: Internal to unit. For Additional LED options not listed, please consult LED MATRIX online, or Factory ***For LEDMR16, use MR16 option (Includes Electronic Low Voltage Transformer) for retrofit lamps.
CONTINUED ON NEXT PAGE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
Suspended:
11 16" 1
8 4"
LIGHTPLANE 9 Page 2 of 5
TYPE:
4. Downlight Quantity: * Enter downlight quantity * For downlight combinations in channel, repeat 3,4 and 5
Wall Mount:
5. Beam Spread (Leave Blank for LED): *F - Flood (F) *N - Narrow Flood (NF) *S - Spot (S) * Variations exist in beam spreads depending on lamp source.
1
11 16"
4 2"
6. Voltage: 1
8 4"
120 -120 volt 277 - 277 volt 347 volt (not available in dimming) * For LED, consult factory. Limitations exist.
Vertical Wall Mount:
7. Accessory Option (Leave Blank for LED):
6"
HEX - Hexcell Louvers (HEX) SNOOT - Snoot (SNT) SOLITE - Solite Lens (SOL) LSS - Linear Spread Lens (LSS) **GC - Glare Cap (GC) **Not Available in LED Options 8.Finish: * AL - Natural “Ultimatte” aluminum (AL) BK - Black powdercoat (BK) WH - White powdercoat (WH) RAL - Specify RAL # of powdercoat of your choice (RAL) * AL is standard on all Lightplane 9 products 9. Additional Options: *OS - Occupancy Sensor(OS) *PH - Photocell - Consult Factory (PH) *EM - Emergency Ballast (EM) *EMC - Emergency Circuit EMC) SB - Seismic Bracing - Consult Factory (SB)
CONTINUED ON NEXT PAGE
1A: The Multiplex can be configured with a multitude of Accessories and configurations
AIMING ANGLES: 20W and Lower Passive and Active (internal fan) cooled units = 45 deg aiming angle within RCS 30W Passively cooled units add an addition heat sink accessory which limits aiming dependent on specification.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE 9 Page 3 of 5
TYPE: MR1650 1 x 50 Watt MR16 Halogen 6” outer diameter gimbal ring / 2” central ring 270° outer/ 170° inner rotation Holds up to 2 accessories / Precision Aiming Power supply located in 6” ballast/transformer pan
R11135 / R11170 1 x 35/70 Watt CDM-R111/35/70 6” outer diameter gimbal ring / 5” central ring 270° outer/ 170° inner rotation No accessories / Precision Aiming Power supply located in 6” ballast/transformer pan
LEDMR16 1 x 3 Watt MR16 LED 6” outer diameter gimbal ring / 2” central ring 270° outer/ 170° inner rotation No accessories / Precision Aiming Power supply located in 6” ballast/transformer pan
LED1525 1 x 15 Watt LED Directional Light Module 25° 3000K 6” outer diameter gimbal ring 270° outer/ 170° inner rotation 534 Lumens - Precision Aiming Power Supply Located in Channel
50AR111 / 75AR111 1 x 50/75 Watt AR111 Halogen 6” outer diameter gimbal ring / 4” central ring 270° outer/ 170° inner rotation No accessories / Precision Aiming Power supply located in 6” ballast/transformer pan
LED1540 1 x 15 Watt LED Directional Light Module 40° 3000K 6” outer diameter gimbal ring 270° outer/ 170° inner rotation 534 Lumens - Precision Aiming Power Supply Located in Channel
QT1250 / QT1275 1 x 50/75 Watt T4 Halogen Capsule 6” outer diameter gimbal ring / 4” central ring 270° outer/ 170° inner rotation Holds up to 1 accessory / Precision Aiming Power supply located in 6” ballast/transformer pan
ADDITIONAL LED MODULES AVAILABLE - REFER TO LED MATRIX ONLINE @ WWW.ARCHLTGWORKS.COM
PAR20 1 x 50 Watt PAR20 Halogen 6” outer diameter gimbal ring / 3” central ring 270° outer/ 170° inner rotation Integral Snoot / Precision Aiming Power supply located in 6” ballast/transformer pan PAR30 1 x 50/75 Watt PAR30 Halogen 6” outer diameter gimbal ring / 4” central ring 270° outer/ 170° inner rotation Integral Snoot / Precision Aiming Power supply located in 6” ballast/transformer pan S08220 / S08235 1 x 22/35 Watt CDM20/35 TM BT-5 6” outer diameter gimbal ring / 3-1/2” central ring 270° outer/ 170° inner rotation Holds up to 1 accessory / Precision Aiming Power supply located in 6” ballast/transformer pan
G2T5 2 x 28 Watt F28T5 Fluorescent 48” wide module Vario system louver w/ 65° cutoff angle Semi-specular reflector Integral power supply G2T5HO 2 x 54 Watt F54T5/HO Fluorescent 48” wide module Vario system louver w/ 65° cutoff angle Semi-specular reflector Integral power supply G2T5LENS 2 x 28 Watt F28T5 Fluorescent 48” wide module White Satine Lens
S11139 / S11170 1 x 39/70 Watt CDM35/70 TC T-4 6” outer diameter gimbal ring / 5” central ring 270° outer/ 170° inner rotation Holds up to 1 accessory / Precision Aiming Power supply located in 6” ballast/transformer pan
Integral power supply
GX1020 / GX1039 1 x 20/39 Watt CMH20/MR16 6” outer diameter gimbal ring / 2” central ring 270° outer/ 170° inner rotation No accessories /Aimable and lockable Power supply located in 6” ballast/transformer pan
Integral power supply
CDMPAR2039 1 x 35 Watt CDM35/PAR20 6” outer diameter gimbal ring / 3” central ring 270° outer/ 170° inner rotation Integral Snoot / Precision Aiming Power supply located in 6” ballast/transformer pan CDMPAR3039 / GCDMPAR3070 1 x 39/70 Watt CDM35/70 PAR30L 6” outer diameter gimbal ring / 4” central ring 270° outer/ 170° inner rotation Integral Snoot / Precision Aiming Power supply located in 6” ballast/transformer pan
G2T5HOLENS 2 x 54 Watt F54T5/HO Fluorescent 48” wide module White Satine Lens
G2T5BLADE 2 x 14 Watt F14T5 Fluorescent 24” wide module Bladed, semi-specular louver Lamps shielded by white lens Integral power supply G2T5HOBLADE 2 x 24 Watt F24T5/HO Fluorescent 24” wide module Bladed, semi-specular louver Lamps shielded by white lens Integral power supply BLANK 6” filler panel Used to fill channel for closed aesthetic
CDMPAR3870 1 x 70 Watt CDM70 PAR38 6” outer diameter gimbal ring / 5” central ring 270° outer/ 170° inner rotation Integral Snoot / Precision Aiming Power supply located in 6” ballast/transformer pan
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE 9 Page 4 of 5
TYPE: Lightplane 9 Configurations by Lamp Type:
Lightplane 9 Configurations by Lamp Type: See below for typical Lightplane 9 configurations. Lightplane 9 can also be customized to suit your projects specifications. Please consult factory for additional configurations
at io n
L1
1
1
14 2"
1
14 2"
L3
27"
20 4"
1
1
1
33 4"
39 2"
L4
14 2" 3
27"
L2
Linear
70 W
ur
HI D
fig
20
on
HI D
C
lo ge n
9
Ha
LP
-3 9W
Note: LP9 - “V” (Vertical configuration) not shown. Consult Factory
39 2"
1
52"
1
L5
52"
39 2"
1
64 2"
1
58 4"
64 2"
1 8 4"
L6
1
77"
L7
77"
58 4"
1
3
89 2"
1
70 4"
89 2"
Linear or Vertical “V”
W1
Wall
W2
1
1
14 2"
1
14 2"
27"
14 2"
27"
27"
1
8 4"
S4 Square
S6
3 22 4" x 1412"
3 3 22 4" x 20 4"
S8
3 22 4" x 27"
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
LIGHTPLANE 9 Page 5 of 5
TYPE: Standard: Pendant Wire Mounting with adjustable aircraft cable suspension
*4-1/2” dia. canopy to cover 4-O Octagon Junction box Bullet Aircraft cable suspension.
*Adjustable GripLock cable suspension
Option: Seismic Bracing
Option: Mitered Angles
Aircraft cable can mount on side of channel to seismic anchoring.
Consult Factory for angle options.
*8FT suspension hardware is standard on all ALW suspended fixtures
Colors and Finishes:
RAL STANDARD: “Ultimatte” Natural aluminum : A two step, clear anodizing process that creates a smooth and durable surface.
OPTION: Black - BK powdercoat
OPTION: RAL - powdercoat the RAL color of your choice. Specify RAL code.
OPTION: White - WH powdercoat
Lamp Shielding Accessories:
Design Specifications
Hexcel Louver (HEX)
Linear Spread Lens (LSS)
Solite Lens (SOL)
Snoot (SNOOT)
Construction Extruded architectural grade T6061 aluminum. Minimum wall thickness is .080” 100% recyclable. Downlight reflectors are made from precision spum aluminum which is chemically polished. Electrical Details All ballasts are electronic <10% THD (where applicable) Class P electronic ballasts - Programmed start (where applicable) Low voltage transformers are individual 75W units (277V/12V or 120/12V) LED options available (consult factory) Multiple interface options available including dimming, motion sensing, daylight harvesting and DALI. ETL Listed for Indoor location only. Finish All fixtures are standard in Ultimatte aluminum finish (AL) - A deep etch and two-step clear anodizing process that gives a smooth, clean and durable surface. Powder Coat options are available. Consult factory.
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time. www.archltgworks.com
10W 15W
CZEN10
CZEN15
CZEN20
15W 18W 28W
Multiplex-15
Multiplex-20
*Multiplex-30
18W 28W
Multiplex-20
*Multiplex-30
2000
1420
1100
2000
1300
1100
Lumens
3400
2000
1300
1100
1000
820
Lumens
3K/35K/4K
3K/35K/4K
3K/35K/4K
3K/35K/4K
3K/35K/4K
3K/35K/4K
Color
3.0K
3.0K
3.0K
3.0K
3.0K
3.0K
Color
* Requires Active or Passive cooling option (Fan or Heatsink extension)
15W
Multiplex-15
Xicato
Power
48W
28W
Module
Citizen
(replaces CZEN41)
CZEN50
(replaces CZEN26)
CZEN30
(replaces CZEN18)
18W
7.6W
CZEN7
(replaces CZEN13)
Power
Module
DUE TO CHANGING TECHNOLOGY, ALW MAY CHANGE SPECIFICATIONS AT ANY TIME. LUMEN RATINGS VARY DEPENDING ON ACCESSORIES, COLOR TEMPERATURE
NEW
Multiplex
3 1/2"H
CZEN 15
3 1/4"H
CZEN 10
2 1/4"H
CZEN 7
CITIZEN MODULES
>80
>80
>80
CRI
>80
>80
>80
>80
>80
>80
25/40/60 80/95
25/40/60 80/95
25/40/60 80/95
25/40/60
25/40/60
25/40/60
Beams
38
38
38
38
38
38
Beams
CRI
9 9
9 9
9 9 9
9 9 9
9 9 9 9 9 9
Lutron
0-10V
9
9
9
9
9 9
9 9
Dimming 0-10V Lutron
9 9
LSS Solite Lens
Hexcell Louver
Bladed Snoot
Snoot
WITH:
LENS OR REFLECTOR
Accessory
Integral Lens
9 9 9 9 9 9 9 9 9D
Frame
9B 9c 9G 9D 9k
9
9G X
5 YEAR
5 YEAR
5 YEAR
5 YEAR
5 YEAR
5 YEAR
9 9 9 9 9 9 9 9
Rec
X
X
X
X
X
X
X
X
Pend
AVAILABLE ONLY IN LPR11 or RCS
9D 9D 9D 9D 9D 9D 9D 9D
Linr
RCS MINI Option
AVAILABLE ONLY IN LPR11
CONSULT FACTORY
NOT AVAILABLE IN LUCERNA
NOT AVAILABLE IN LPL35 OR SMALLER
X
X
9D
9
9c
9B 9B9k 9
9
9B 9B9k 9
9 9
Integral Lens
9
9 9
9 9
Fixture Compatibility Linr Rec Pend Warranty
Frame
Integral Lens
Integral Lens
Integral Lens
Integral Lens
Accessory
Pendant points including GRV, REG Recessed fixtures including LPR11, RCS, RCS Mini LUC Linear fixtures including LPL6,LPL5,LPL35,LPL25,LPL1, LPLB,LPRS Framed fixtures including LP11,LP9, LPMono, LPCS
For Retrofit- Type Lamps, Specify MR16 or PAR Halogen Equivalents
Pend: Rec: Linr: Framed:
LED MATRIX UPDATED 7-13-13
10W/LF 1000 LM/LF 14W/LF 1400 LM/LF
HP10
HP14
RGB
4W/LF
46LM/ FT
5.9W/LF 259 LM/FT 11.8W/ LF 520 LM/FT
LED5W
LED10W
700 LM/LF
7W/LF
HP7
Lumens
540
Power
15W
LED15 GLED15
Lumens
Strip
Power
Module
DUE TO CHANGING TECHNOLOGY, ALW MAY CHANGE SPECIFICATIONS AT ANY TIME. LUMEN RATINGS VARY DEPENDING ON ACCESSORIES, COLOR TEMPERATURE
LINEAR
EDISON MODULES
24 Volt 24 Volt
3.0KÜ/4.0K
24 Volt
C.Current
C.Current
C.Current
3.0K/3.5KÜ 4.0K/4.9K 3.0K/3.5KÜ 4.0K/4.9K 3.0K/3.5KÜ 4.0K/4.9K 3.0KÜ/4.0K
24/40
Beams
Power
RGB
n/a
>80
>80
>80
>80
>80
CRI
>80
CRI
9 9 9 9 9
9 9 9 9 9 9 --DMX--
Lutron
9
9
0-10V
Lutron
0-10V
n/a
n/a
n/a
n/a
n/a
n/a
Accessory
X
Accessory
Pendant points including GRV, REG, CP Recessed fixtures including LPR11, RCS,LUC Linear fixtures including LPL6,LPL35,LPL25,LPL1, LPLB,LPRS Framed fixtures including LP11,LP9, LPMono, LPCS
Color
3K/4K
Color
Pend: Rec: Linr: Framed:
LED MATRIX
9 9 9 9F 9E
9
9
9
Frame
9
X
X
X
X
X
X
Rec
9
3 YEAR
9F 9F 9F
9F
9F
9F
3 YEAR
3 YEAR
3 YEAR
10 YEAR LIMITED
10 YEAR LIMITED
10 YEAR LIMITED
Pend Warranty
X
NOT AVAILABLE IN LPL 2" OR SMALLER
AVAILABLE IN CP ONLY
9 9 9
9
9
9
Linr
X
Fixture Compatibility Linr Rec Pend Warranty
Frame
UPDATED 7-13-13
DUE TO CHANGING TECHNOLOGY, ALW MAY CHANGE SPECIFICATIONS AT ANY TIME. LUMEN RATINGS VARY DEPENDING ON ACCESSORIES, COLOR TEMPERATURE
Accessories: Linear Systems: Lenses available in a frosted White (WD) diffuser or an opal extra diffuse lens (EXT), which is recommended for maximum lamps shielding Louvers are also available. Modules: Many modules accommodate lenses or snoots. Contact factory for more information.
Emergency: Emergency Illumination of LEDs is available, typically in a remote emergency ballast enclosure or inverter. Contact factory for more information
Control: Photosensor and Occupancy control is available. Contact factory for more information
0-10V is available with DC Drivers. Phase angle dimming available for standard LED modules in certain cases (contact factory). DMX, RGB Controls also available. Lutron Hilume A Series dimming is available with an accompanying ballast pan or a remote installation (or as otherwise noted). Contact factory for more information.
Available Options:
ALW will warranty the HP7, HP10, HP14 Linear Boards for a period of 10 years (Limited Warranty) ALW will warranty the LED Drivers for a period of 5 Years (Limited Warranty).
ALW will warranty the LED Emitters for the time in the Warranty period. This warranty does not cover the entire luminaire. This Warranty Covers the value of the replacement emitter, not any indirect losses. This Warranty applies to all standard products.
Warranty Information:
Active cooling involves devices that move air over heatsink surfaces. These may be audible in certain environments.
LED MATRIX UPDATED 7-13-13
