Transcript
LPH2008A-4GSFP
Industrial Managed Gigabit Ethernet PoE+ Switch
Quick Start Guide Has (8) PoE+ 10/100/1000-Mbps twisted-pair and (4) SFP Gigabit ports.
Customer Support Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) • FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 www.blackbox.com •
[email protected]
Industrial Managed GE PoE+ Switch Quick Start Guide 1. Specifications For complete specifications, see the user manual or the product data sheet for this switch. 1. Go to www.blackbox.com 2. E nter the part number (LPH2008A-4GSFP) in the search box:
3. C lick on the “Resources” tab on the product page, and select the document you wish to download.
2. Features •H as (8) PoE+ 10-/100-/1000-Mbps copper access ports and (4) Gigabit SFP ports. •O perates in extreme temperatures of -40 to +158° F (-40 to +70° C).
3. What’s Included Your package should contain the following items. If anything is missing or damaged, contact Black Box Technical Support at 724-746-5500 or
[email protected]. • Industrial Managed Gigabit Ethernet PoE+ Switch - 8-Port RJ-45, 4-Port SFP • (4) dust covers (installed on SFP slots to protect the electronic circuitry) • (9) dust covers (installed on RJ-45 slots to protect the electronic circuitry) • Console cable • DIN-rail mounting kit • Wallmounting kit
Page 2
724-746-5500 | blackbox.com
Industrial Managed GE PoE+ Switch Quick Start Guide • Console cable • (6) M3 x 5 flat-head screws • This printed quick start guide
4. Hardware Description Figure 1-1 shows the Hardened Gigabit PoE+ Switch’s front panel. Table 1-1 describes its components.
1 2 3 4 5 6 7
12 13
8 9 10 14 11
Figure 1. Front panel. 1. 2. 3. 4. 5. 6. 7.
Reset button PWR status LED PWR1 LED PWR2 LED Ring Master status LED Ring status LED Fault relay LED
8. Console port 9. Link/Act LED for Gigabit LAN ports 10. Speed LED for LAN ports 11. PoE indicators for LAN ports 12. Link/Act LED for SFP ports 13. SFP ports 14. Gigabit LAN ports
724-746-5500 | blackbox.com
Page 3
Industrial Managed GE PoE+ Switch Quick Start Guide 5. Hardware Installation STEP 1: Installing the Switch on a DIN Rail or Wall Refer to the illustrations below to mount the switch on a DIN rail or wall.
DIN Rail
Wallmount
Figure 2. DIN rail or walllmount installation.
Page 4
724-746-5500 | blackbox.com
Industrial Managed GE PoE+ Switch Quick Start Guide STEP 2: Network connection. The switch provides standard Ethernet ports. According to the link type, the switch uses CAT3, 4, 5, 5e UTP cables to connect to any other network devices (PCs, servers, switches, routers, or hubs). Refer to the user manual for cable specifications. STEP 3: Wiring The switch supports dual redundant power supplies. The connections for PWR1, PWR2, and RELAY are located on the terminal block.
Figure 4. Terminal block. STEP 3A: Insert the negative/positive wires into the V+/Vterminals, respectively. STEP 3B: To keep the DC wires from pulling loose, user a small flat-blade screwdriver to lighten the wire-clamp screws on the front of the terminal block connector. Relay contact The two sets of relay contacts on the 6-pin terminal block connector are used to detect userconfigured events. The two wires attached to the fault contacts form an open circuit when a user-configured event is triggered. If a user-configured event does not occur, the fault circuit remains closed.
724-746-5500 | blackbox.com
Page 5
Industrial Managed GE PoE+ Switch Quick Start Guide Grounding Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection from the ground screws to the grounding surface prior to connecting devices.
Figure 3. Power connection guide. After installing the switch, the green Power LED should light.
Page 6
724-746-5500 | blackbox.com
Industrial Managed GE PoE+ Switch Quick Start Guide Table 1. LPH2008A-4GSFP indicators. Component
Description
(3) Power LEDs
• PWR lights when PWR is on. • PWR1 lights when DC power module 1 is activated. • PWR2 lights when DC power module 2 is activated.
(1) Ring Master LED
• Lights when Ring is enabled. • Blinking when ring structure is broken.
(1) Fault LED
Power failure or port disconnected.
(1) PoE LEDs
Lights when the port is using PoE+.
10/100/1000BASE-T(X) Gigabit PoE ports: LINK/ACT LEDs
• ON when the port link is connected. • Blinking when data is being transmitted.
Speed
• Lights green when port link speed is 1000 Mbps. • Lights amber when port link speed is 100 Mbps. • OFF when port link speed is 10 Mbps.
SFP ports: LINK ACT LEDs
• Lights when port link is connected. • Blinking when data is being transmitted.
724-746-5500 | blackbox.com
Page 7
Industrial Managed GE PoE+ Switch Quick Start Guide 5. Configuration 1. L aunch Internet Explorer and type in the IP address of the switch. The default static IP address is 192.168.10.1. 2. L ogin in with the default user name and password (both are admin). The following screen appears. For more information on configuring or operating the switch, see the user manual.
Figure 5. Login screen. Resetting To reboot the switch, press the Reset button for 2–3 seconds. To restore the switch configurations back to the factory defaults, press the Reset button for 5 seconds.
Page 8
724-746-5500 | blackbox.com
Industrial Managed GE PoE+ Switch Quick Start Guide PoE+ Pin Definition Table 3-2. PoE pin definition.
Pin
10/100BASE-T(X) PSE RJ-45 port
Pin
1000BASE-T PSE RJ-45 port
1
TD+ with PoE power input +
1
BI_DA+ with PoE power input +
2
TD- with PoE power input +
2
BI_DA- with PoE power input +
3
RD+ with PoE power input -
3
BI_DB+ with PoE power input -
6
RD- with PoE power input -
4
BI_DC+
4
Not used
5
BI_DC-
5
Not used
6
BI_DB- with PoE power input
7
Not used
7
BI_DD+
8
Not used
8
BI_DD-
724-746-5500 | blackbox.com
Page 9
NOTES
Page 10
724-746-5500 | blackbox.com
NOTES
724-746-5500 | blackbox.com
Page 11
Chapter Black Box Tech Support: FREE! Live. 24/7.
Tech support the way it should be.
Great tech support is just 60 seconds away at 724-746-5500 or blackbox.com.
About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 60 seconds or less. © Copyright 2015. Black Box Corporation. All rights reserved. Black Box® and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any third-party trademarks appearing in this manual are acknowledged to be the property of their respective owners.
LPH2008A-4GSFP, version 1
Page 900
724-746-5500 | blackbox.com
