Ls 750gt

Transcript

Fiber Optic Camera System Fibre Optic Camera Adaptor (Standard 60W Version) LS-750 Fibre Optic Base Station (Standard Version for use with LS-750) LS-850 Fibre Optic Camera Adaptor (High Power 300W Version) LS-750GT Fibre Optic Base Station (High Power Version for use with LS-750GT) www.nipros.jp ※ Specification and appearance of products might be changed without notice. LS-850GT Fibre Optic Camera System Simultaneously Transmit 2K & 4K or up to 5 x HD (3G) camera channels. Or Ultimate in Flexible Fibre Optic Camera Systems Here is the Dream. Major features of LS-750/GT & LS-850/GT ● 5 x Down Streams & 1 x Up Stream of 3G/HD-SDI/SD-SDI ● 4K ＋ HD or 5 x Cameras picture (3G/HD/SD can be mixed independently) ● Active loop through output for each 3G-SDI input of LS-750/GT ● Transmit all data of SDI signal including Embedded Audio & all Ancillary data ● TALLY (Green & Red) transmission ● Time code (TC) Input / Output ● Intercom x 2 lines (PROD & ENG) ● Signal Check function ● Remote Camera Communication ● LANC Remote ● LAN (Ethernet) IP communication function (100Base-TX) ● HD-SDI/SD-SDI & VBS/HD-Y Return Video transmission ● High Power Supply capability for the Camera & Accessories ● Up to 2Km transmission with 60W power or 200m with 300W power supply 2 Fibre Optic Camera System LS -750 U s e u p t o 5 x 3 G -S D I / H D -S D I / S D -S D I s i g n a l s , Re t u r n s i g n a l , Re m o te C o n t ro l , I n te r c o m , T i m e - c o d e , Re fe re n c e S i g n a l , i n c l u d - ing power being sent (transmitted) via a S M P T E f i b r e c a b l e . A ny 4 K o r H D c a m e ra s i n c lu ding S O N Y P MW/P DW se ri es , Can on E O S & C s e- r i e s, Panaso nic 4 K or P 2 s e ri e s , I ke ga m i G F C A M , J VC G Y s e r i e s a n d o t h e r s w o r k w i t h the LS-750 to allow multi camera system co nf ig u ratio n. LS-850 Using the LS-850 base station 4K & 2K or LS-750 Operation Panel LS-750 Connector Panel 2 x 3D transmission is possible. Return signal, Remote Control, Intercom, Timecode, Reference Signal can be sent & re c e ive d * ( * Re t u r n 1 x c h a n n e l o n ly ) u s i n g a S M P T E hy b r i d f i b r e o p t i c c a b l e o f u p t o 2Km. The LS-750 can be operated by AC 100-240V or DC 12/24V and its compact h a l f - ra c k s i z e d e s i g n m a ke s fo r c o nve n i e n t and efficient mounting. With Easy and S i m p l e c o n n e c t i o n o f Ta l l y & I n t e r c o m the LS-750 can be used as part of any B ro adc ast o r larg e L ive P rod uc t i on sys tem . LS-850 Operation Panel LS-850 Connector Panel LS-750GT Operation Panel LS-750GT Connector Panel LS-850GT Operation Panel LS-850GT Connector Panel LS-750GT T he LS-7 5 0 GT h as t he s am e fea t ure s as t he LS-750 but is designed to accept a higher s u p p ly o f p ower (3 0 0 W m a x ) f rom t he b as e station over a distance of up to 2Km(LS- 850GT). The greater power supply allows the powering additional camera accessor i es via 1 5 ~ 2 4 V DC port s , as wel l as run n ing th e standard I n terc om L i n e s t he ex t ra power permits the use of a Clearcom belt p a c k at eith er end o f t he LS- 7 5 0 GT an d LS850 GT. LS-850GT The LS-850GT Base Station can supply a h i gh e r p owe r o u t p u t t h a n t h e s t a n d a rd LS 850, combined with the LS-75GT Camera Adaptor the LS-850GT can transmit up to 300W (max) of power via a SMPTE Fibre O ptic c ab le u p to a d i s t an c e of 2 K m . 3 Fibre Optic Camera System PROFESSIONAL, BROADCAST QUALITY NIPROS “4K+X” System The NIPROS LS- System offers the most reliable Transmission Solution For today’s HD/SD to future 4K production Quality & Durability Transmission Distance Up To 2Km (Max) Hight-Output Power Supply T h e d u ra b l e LS - 7 5 0 / LS - 8 5 0 s e r i e s i s d e - Using the standard LS-750 / 850 60W of The LS-750GT & LS-850GT combination toughest of live-conditions whether in 2Km via a SMPTE fibre optic cable (between c a n b e u s e d t o p o we r a c a m e ra a n d a c c e s - signed for professional operation in the extreme heat / sunlight or cold / frozen env i ron m en t s. M a n u fa c t u red to t he hi ghes t b roa d ca s t q u ality th e LS- sys tem as b en ap p rove d by so me o f th e wo rl d s m os t ex perie n ce d “ l ive c amera” o p erato rs . 5 x HD-SDI/3G-SDI Down Streams & 1x Up Stream Transmission 4 K + H D o r u p t o 5 x H D o f 3 G / H D / S D -S D s i g n a l s c a n b e t ra n s m i t te d s i m u l t a n e o u s ly. Genlock and the uniformity of the signal fo rma t a re no t mandato ry for t he t ran s m i s - sion; these 5 signals can be transmitted fu l ly i n d e pendently. power can be supplied up to a distance of t h e b a s e s t a t i o n a n d t h e c a m e ra a d a p t o r ) . With the LS-750GT / 850GT combination t h e p o w e r s u p p ly i n c re a s e s t o a m a x i m u m o f 3 0 0 W, p o we r d o e s d e c re a s e ove r l o n g e r c a b l e r u n s h o w e ve r 2 0 0 W i s s t i l l p o s s i b l e at a distance of 500m. (Please note that t h e Po w e r C o n s u m p t i o n / C u r re n t L o a d o f c a m e ra s d i f f e r s b e t w e e n m a k e s & m o d e l s , c hec k w i t h m a n u fa c t u re r fo r d e t a il s ) Signal Transmission S D I s i g n a l s t h a t a re s e n t v i a t h e LS sys te m c a n b e t ran s m it te d in d iv id u a l ly o r sy n c h ro - o u t p u t s a m a x i m u m o f 3 0 0 W o f p owe r t h a t sories. This innovative feature is made p o s s i b l e b y t h e u s e o f a n a dva n c e d p o w e r s u p p ly s p e c ific a l ly d e s ig n e d fo r t h e NI P RO S fib re o p t ic sys te m . Camera Remote Control M o s t s e r ia l c o m m u n ic a t io n re m o te co n tro ls c a n b e t ra n s m i t te d t h ro u gh t h e LS - 8 5 0 / GT to t h e LS - 750/GT. S o ny, Pa n a s o n ic , I ke ga m i , J VC a n d o t h e r L A N C re m o te c o n t ro l s c a n b e u s e d w it h t h e LS sys te m . nised as can Genlock, so it is possible to m i x a ny t ran s m it te d S D I s ig n a l . Intercom (ENG and Production) Two l i n e s o f i n t e rc o m c o m m u n i c a t i o n E N G and PROD, allowing connection to other Signal Status Indicator Transmission of All data in any SDI format A remarkable feature of LS series is that a ny d a t a f ro m a ny S D I s i g n a l c a n b e t ra n s mitted without data elimination. This is very important as there is a variety of Metadata in the SDI Ancillary area, 2048 x 1080 resolution SDI data can also be transmitted. This feature makes LS series a future proof solution for camera image tra n s mi s s io n. 4 T he s t a t us of e a c h s ig n a l b e in g t ra n s m it te d is displ ayed via a LE D indicator on b ot h t he LS b a s e s t a t i o n a n d c a m e ra a d a p te r, a l l owi n g i n s t an t c he c k in g o f s ig n a l s t a t u s . b ro a d c a s t in g fa c il it ie s v ia t wo o r fo u r w i re sys te m s . Fibre Optic Camera System AC-DC Operation LS-750/GT Signal Loop Through LS 850/GT Dual Signal Output The LS 750/850 system can be operated E a c h L S - 7 5 0 / GT c a m e ra a d a p t e r s i g n a l i n - The LS-850/GT base station has dual BNC possible by the use of a specially de- device, for when recording to an external d iffe re n t d evic e s e . g : sw itc h e r a n d m o n i to r. u s i n g e i t h e r AC o r D C p o w e r, t h i s i s m a d e signed low-power circuit. Notes: The LS7 5 0 GT / 8 5 0 GT sys te m c a n o n ly b e p owe re d put can be looped through to an external rec ord e r is re q u ire d . o u t p u t s s o s i g n a l c a n b e c o n n e c t e d t o t wo by AC. NIPROS HDS-300S Studio Camera Rig Us i n g t h e N I PRO S HD S - 300S c a m e ra s u p p o rt sys te m s im p l ifie s c a m e ra , LS - 7 5 0 / GT c a m e ra a d a pte r a n d a c c e s s o ry s e t u p , c re a t in g a p ro fe s s io n a l a n d e ffic ie n t s t u d io s t yle c a m e ra r i g. Power Supply Backup Function If the LS-750/850 system is connected to AC and lo c al D C p ower i t w i l l run us i n g t he AC su p p ly, h owever, s houl d AC power fa i l i t w i l l a u to m a t i c a l ly s w i tc h to t h e D C p o we r, to p rovide c o ntinu ous t ran s m i s s i on . LAN (IP Communication) Function Control cameras and accessories through I P 1 0 0 B a s e -T X d i r e c t f r o m L S - 8 5 0 / 8 5 0 GT base station to LS-750/850 GT camera a dap ter. With Canon C500 4K Cinema Camera and EF Zoom Lens with CMOTION lens controller Simple Tally Function E a c h t a l ly s ig n a l re c e ive d fro m a sw itc h e r c a n b e c o n n e c te d to t h e LS - 850/GT b a s e s t a t i o n . For-A FT-ONE (IP control is required) Bi-Directional TC (Timecode) Bi-Directional TC transmission enables A s i m p l e c l o s e c o n t a c t t yp e t a l ly s ig n a l c a n b e s h ow n a s a re d t a l ly, wh e re a s a s a c o m p o s i te t y pe t a l ly s ig n a l c a n b e s h ow n in b o t h re d a n d g re e n ( 5V: RE D / 3V: G RE E N ) . Broadcast Intercom System e a c h c a m e ra s re c o rd e r to b e f u l ly sy n c h ro - The pass through communication line i s a b enef it wh en u s i n g a n ex tern a l rec ord - GT enables the use of a broadcast n iz ed with th e same t i m ec od e . T hi s fe a t ure ing accessory connected to the camera a dap ter. between the LS-750 GT and LS-850 t y p e b e l t - p a c k i n te rc o m sys te m , t h i s feature allows intercom use at both e n d s of t h e t ra n s m is s io n sys te m . 5 Fibre Optic Camera System NIPROS HD Viewfinder Return Video Viewing T h e fe a t u re p ac ked mu lti-f un c t i on N I P RO S HD Vi e w f i n d er c a n b e i nte gra te d as p art o f th e HDS- 3 0 0 s t ud i o ri g . The LS-750/GT system used in combination with a NIRPOS Viewf i n d e r ( H D F- 7 0 0 / H D F- 7 0 0 V / H D F- 5 0 0 ) , a l l ows t h e c a m e ra o p e ra to r to see t he ret u rn video com in g from t he LS - 750/GT ca m era a da p tor, by s w i t c h i n g b e t w e e n t h e c a m e ra p i c t u re a n d re t u r n v i d e o a t t h e Simple Menu-Free Setup T h e LS - 7 5 0 / GT a n d LS - 8 5 0 / GT i s a p l u g a n d p l ay e a sy to s e t u p system, has no complicated setup menu, just connect a signal a n d t ra n s mit . p u s h o f a b u t to n . Clean Digital Signal Output T h e h i g h - q u a l i t y d e s i g n o f b o t h t h e o p t i c a l a n d d i g i t a l c i rc u i t s o f t h e LS - 750/GT a n d LS - 850/GT o u t p u t s b ro a d c a s t q u a l it y t ra n s m i s s io n s ig n a l s . Special Re-Clock Circuit for Constant High-Quality Signal Interruptions to the clean output signals from the base station PMW- F5 5 ca mera → B NC Ca b l e(5 CFB 1 0 0 M) → W/ F s cope su ch a s t h o se c au sed by lo ng B N C c a b l e s i s prote c te d by a re- c l o c k c i rc u i t . T h e n e w ly d eve l o p e d L S s e r i e s re - c l o c k c i rc u i t e f fe c t ive ly c l e a n s t ransmissio n sig nal preve n t i n g a ny pa c ket l os s . ( T he fo l l ow- i ng s i gn a l wave were o b ser ved w i t h Sony P M W- F 5 5 @ 1 0 8 0 / 2 3. 98p fo rma t conditio n.) PMW-F55 c amera → BNC Cable(5CFB 100M) → LS-750 → S MPT E Fiber Cable → LS- 850 → BNC cable(5CFB 2M) → W/F scope 6 SDI Output-1 SDI Output-2 SDI Output-3 SDI Output-4 SDI Output-5 SDI Return Output Fibre Optic Camera System 4K Camera System Example 4K Recorder NIPROS HDF View Finder SDI / HDMI Monitor Out 4K Camera 3G-SDI Out x 4 4K Monitor SDI RET x1 SDI Through Out x 5 3G-SDI Out x 5 (1) 3G-SDI In x 5 LS-750 Remote x 1 Lens Controller HD Studio Monitor SMPTE Fiber Cable Up to 2Km LS-850 3G-SDI Out x 5 (2) LAN x 1 V-mount Attach DC 12V (60W) DC 12V Out x 2 4K Switcher NIPROS HDS-300 Build-up unit SDI RET Input Camera Remote NIPROS ST-1 / ST-2 / VST-14 Tripod Plate & Adaptor NIPROS NVS-20 System Tripod LAN Lens Remote or Camera Remote Control HD Multi Camera System Example HD Monitor NIPROS HDF View Finder Field Monitor Selector SDI Through Out x 5 SDI RET x1 HD (3G) SDI In x5 SDI Out x 5 (1) LS-750 SMPTE Fiber Cable Up to 2Km LAN x 1 SDI Out x 5 (2) DC 12V (60W) LAN IP Remote HD (3G) Camera x 5 IP HUB IP Remote Pan / Tilt Head DC / DC Convertor LS-850 HD Switcher SDI RET Input IP Control Remote Camera System 7 Option Products Studio Rig Professional HD Viewfinder HDS-300S HDF-700SK Configure LS-750/GT in to professional studio camera rig Includes: Clear Peaking and Return Video function 4-Wire Intercom Cable Intercom Heasdset IC-4W Rack Mount Adaptor DL-500 Connect LS-850/GT to various Intercom Systems Dynamic Intercom Headset HS-RA95 Rack Mount adaptor for LS-850 Mechanical Dimension Unit : mm ●LS-750(/GT) Major Specification Inputs ●LS-850(/GT) Major Specification Outputs 3G/HD/SD-SDI 1 -5 IN 5 x BNC : 3G/HD/SD-SDI 1 - 5ch Input, All data including embedded audio and TC can be transmitted. 3G/HD/SD-SDI 1 -5 OUT VBS IN 1 x BNC : 1Vp-p, 75Ω, Analogue composite video input VBS OUT 1 x BNC : 1Vp-p, 75Ω, Analogue composite video output TC IN 1 x BNC : Time code input TALLY OUT 1 x HD D-sub 15-pin(female) : Tally output for cascade connection DC IN (LS-750 only) 1 x V-mount type battery shoe TC OUT 1 x BNC : Time code output Inputs Outputs RET HD-SDI OUT       1 x BNC : 3G/HD/SD-SDI, All data including embedded audio and TC can be transmitted. 3G/HD/SD-SDI 1 - 5 OUT 5 x BNC : Active through outputs for each 3G/HD/SD-SDI IN 1 - 5ch Input RET VBS/HD-Y OUT     1 x BNC : 1Vp-p, 75Ω Analogue composite or HD-Y signal output ※1 VBS OUT (OPTION) 1 x BNC : 1Vp-p, 75Ω Analogue composite output REF/PROMPTER OUT    1 x BNC : 1Vp-p, 75Ω Analogue composite or HD-Y signal output for Genlock or Prompter TALLY OUT 1 x BNC : Tally signal output （3V : GREEN TALLY / 5V : RED TALLY） TC OUT           1 x BNC : Time code output RET HD-SDI IN        1 x BNC : 3G/HD/SD-SDI, All data including embedded audio and TC can be transmitted. RET VBS/HD-Y IN      1 x BNC : 1Vp-p, 75Ω Analogue composite video or HD-Y signal ※1 REF/PROMPTER IN     1 x BNC : 1Vp-p, 75Ω Analogue composite video or HD-Y signal（Prompter signal input） VBS IN (OPTION) 1 x BNC : 1Vp-p, 75Ω Analogue composite video TALLY IN TC IN AC IN : AC 100/200 V(85-240V) 60Hz/50Hz Audio 1 x XLR 4-pin(female) : Audio I/O 1x HD D-Sub 15-pin(female) Audio monitor 1x φ 6.3mm stereo-jack DC 12 V (Max 3.5 A) 1 x V-mount type battery shoe: DC 15 V 1 x XLR 4-pin(female) : DC 12 V 2 x XLR 4-pin(female) : DC 15 V 1 x XLR 2-pin(female) : DC 24 V (Total Power Suply Capability : Max. 300W) Audio 1 x D-Sub 15-pin(female) : for Audio Input / Output Headphone 1 x Stereo mini-jack Φ 3.5 mm Intercom 2 x XLR 4-pin(male) : for Dynamic type Intercom Headset Tally Tally Indicator LAN    : Optical Fiber OPT 1 x HD D-sub 15-pin(female) HEADSET 1 x XLR 4-pin(male) : for Dynamic type Intercom Headset Tally Indicator LANC 1 x Side connector panel : RED, H/L/OFF selectable 1 x Φ 2.5 mm 3pin mini-jack : LANC remote control   1 x RJ45 (8-pin) : LAN (Ethernet) 100Mbps LEMO P/N: EDW.3K.93C.TLC OPT Maximum distance Power consumption AC : Max. approx. 128 W / DC : Max. approx. 28 W Operational temperature 0 ℃ to 40 ℃ (+32 F to 104 F) Storage temperature -20 ℃ to 60 ℃ (-4 F to 140 F) Approx. 3.3 kg Dimension (WxHxD) 215 x 115 x 302 mm Approx. 2 km (1.25 miles） with power supply General (LS-850GT) Power consumption Max. 19W Operational temperature 0 ℃ to 40 ℃ (+32 F to 104 F) Storage temperature -20 ℃ to 60 ℃ (-4 F to 140 F) Approx.1.8 kg Dimension (WxHxD) 198 x 175 x 106 mm General (LS-750GT) Operational temperature 0 ℃ to 40 ℃ (+32 F to 104 F) Storage temperature -20 ℃ to 60 ℃ (-4 F to 140 F) Mass Approx. 3.2 kg Dimension (WxHxD) 198 x 175 x 170 mm ※1 : Either of RET VBS/HD-Y IN 1 or 2 of LS-850/GT is selected by the panel switch of LS-750/GT RET 1/2 ※2 : Two communications of these can work at the same time. www.nipros.jp (C)2013 Nippon Video System Co. Ltd. All rights reserved. Features and Specifications are subject to change without notice. (Rev.1.3) Approx. 2 km (1.25 miles） with power supply AC : 100/200 V(85-240V) 60Hz/50Hz / DC : 12 V(12-16V) DC 15 V Mass LEMO P/N: FXW.3K.93C.TLM General (LS-850) Power (local supply) General (LS-750) 1 x Φ 2.5 mm 3pin mini-jack : LANC remote control   1 x RJ45 (8-pin) : LAN (Ethernet) 100Mbps Power Mass Maximum distance 2 x 8-pin(female) SONY / 1 x 10-pin(male) Panasonic / 1 x 12-pin(female) for general communication (※2) Optical Fiber 2 x 8-pin(female) SONY / 1 x 10-pin(male) Panasonic / 1 x 12-pin(female) for general communication 1 x LED : RED / GREEN Remote REM LAN    (※2) LANC PROD : 1 x XLR 3-pin(female) , 1 x XLR 3-pin(male) ENG : 1 x XLR 3-pin(female) , 1 x XLR 3-pin(male) 4 Wire line 1 x Main panel : RED / GREEN Remote REM Intercom 2 Wire line Tally AUDIO I/O HEADSET 1/2 DC IN : 1x XLR 4-pin(male) 12 V(12-16V) 1 x V-mount type battery shoe: DC 15 V (Max 4.5 A) (Total Power Suply Capability : Max. 75W) DC outputs (LS-750GT) 1 x BNC : Tally signal input （3V : GREEN TALLY / 5V : RED TALLY）            1 x BNC : Time code input Power IF OUT            1 x Mini 6-pin (Female) Return video and DC 13.5 V(1 A), TALLY for NIPROS LVM-89W monitor DC outputs (LS-750) 5 x BNC : 3G/HD/SD-SDI 1 - 5ch Output, All data including embedded audio and TC can be transmitted. Power AC : 100/200 V(85-240V) 60Hz/50Hz / DC : 12 V(12-16V) Power consumption AC : Max. approx. W / DC : Max. approx. 28 W Operational temperature 0 ℃ to 40 ℃ (+32 F to 104 F) Storage temperature -20 ℃ to 60 ℃ (-4 F to 140 F) Mass Approx. kg Dimension (WxHxD) 430 x 115 x 302 mm ※1 : Either of RET VBS/HD-Y IN 1 or 2 of LS-850/GT is selected by the panel switch of LS-750/GT RET 1/2 ※2 : Two communications of these can work at the same time. Please contact to :