Transcript
LSA L-Band splitter series LSA2S 1/2-slot Modular L-Band splitter EcoLine
The LSA2S L-Band splitter system offers various single or dual splittier-modules (1:8 & 1:16) enabling satellite signal distribution with 8 to 16 output-ports in one chassis. The modular type 1RU/19" LSA2S chassis allows insertion of 1:8 to 1:16 single and dual spliter modules (see chassis configuration below). It is furthermore equipped with 2 power-supply units assuring 1:1 hot-swappable power-supply redundancy. Furthermore it allows switchable LNB supply. The LSA2S and its associated splitter-modules are perfectly suited for Satellite and broadband communications infrastructures where flexible signal distribution and accurate RF performance is relevant.
FEATURES
TECHNICAL SPECIFICATION
Space saving 1RU/19" design
Dimensions:
1RU/19", 260mm depth
Single or dual 1:8 & 1;16 L-Band splitter-modules
Power supply:
85...230V, 50/60Hz 1:1 redundant (hot-swap)
Switchable LNB supply Power consumption:
< 10W
Supports mixed input impedance configuration (50Ohm & 70 Ohm)
L-Band outputs:
8, 16, 2 x 8, 2 x 16
1:1 power supply redundancy
Ext. free error contact:
DB9-female
Output impedance:
50Ohm or 75Ohm
CHASSIS CONFIGURATION LSA2S-108:
Single 1:8 splitter
Connectors:
SMA(f) or F(f)
LSA2S-116:
Single 1:16 splitter
Output isolation:
>20dB
LSA2S-208:
Dual 1:8 splitter
Output connectors:
F(f)
LSA2S-216:
Dual 1:16 splitter
Frequency range:
950...2150MHz
Insertion loss:
0dB typ. < +/- 0,5dB max.
SPLITTER MODULE CONFIGURATION LSA108EL*:
Single 1:8 active splitter (fits into LSA2S chassis)
Frequency response:
LSA116EL*:
Single 1:16 active splitter (fits into LSA2S chassis)
Port matching (all ports): -16dB typ.
LSA208EL*:
Dual 1:8 active splitter (fits into LSA2S chassis)
IMA3 @ -10dBm:
> - 56dBc
LSA216EL*:
Dual 1:16 active splitter (fits into LSA2S chassis)
Noise figure:
<5dB
LNB supply:
15V DC, 300mA
Next page:
LSA16S 8/16-slot Modular L-Band splitter
* add -V75 for 75Ohm version * add -E75 for 50Ohm version with 75Ohm input * add -E50 for 75Ohm version with 50Ohm input
LSA Optical Input L-Band Splitters
GENERAL
LSA L-Band splitter series LSA16S 8/16-slot Modular L-Band splitter EcoLine
The LSA16S features a 8 or 16-way L-Band splitter solution. The LSA16S modular chassis allows insertion of 8 or 16 1:4, 1:8 or 1:16 splitter modules (see chassis and module configuration below). This system allows flexible satellite signal distribution in an efficient, space saving and reliable way while the chassis also supports 1:1 hot swappable power-supply redundancy, LNB supply and optionally the unit can be equipped with an ethernet-interface for remote access and configuration. The LSA16S and its associated splitter-modules are perfectly suited for Satellite and broadband communications infrastructures where flexible signal distribution and accurate RF performance is relevant.
FEATURES
TECHNICAL SPECIFICATION
Flexible modular 3/4RU/19" design chassis
Dimensions:
3/4RU/19", 300mm depth
Splitter-module slots front or rear (8 or 16 slots/chassis)
Power supply:
85...230V, 50/60Hz 1:1 redundant (hot-swap)
Power consumption:
< 60W
L-Band outputs:
4, 8 or 16 outputs
Ext. free error contact:
DB9-female
Output impedance:
50Ohm or 75Ohm
Connectors:
SMA(f) or F(f)
Output isolation:
>20dB
Output connectors:
F(f)
Frequency range:
950...2150MHz
Insertion loss:
0dB typ.
Frequency response:
< +/- 0,5dB max.
Port matching (all ports):
-16dB typ.
IMA3 @ -10dBm:
> - 56dBc
Noise figure:
<5dB
LNB supply:
13, 15, 18V DC, 22 Khz 300mA (see options)
Remote access/config:
Ethernet-interface (Web/SNMP)
Various splitting modules 1:4, 1:8 or 1:16 LNB supply (option) Supports mixed input impedance configuration (50Ohm & 70 Ohm) 1:1 power supply redundancy Remote access and configuration via ethernet-interface (option)
CHASSIS CONFIGURATION LSA316S:
16 x 1:4 splitter-module (4RU/19")
LSA416S:
16 x 1:8 splitter-module (4RU/19")
LSA408S:
08 x 1:16 splitter-module (4RU/19")
SPLITTER MODULE CONFIGURATION LSA104EL*:
16 x 1:4 active splitter (fits into LSA316S chassis)
LSA116EL*:
16 x 1:8 active splitter (fits into LSA416S chassis)
LSA208EL*:
08 x 1:16 active splitter (fits into LSA408S chassis)
* add -V75 for 75Ohm version * add -E75 for 50Ohm version with 75Ohm input * add -E50 for 75Ohm version with 50Ohm input
OPTIONS Option 031: Option 021: Option 022:
Ethernet-interface (10Mbit) LNB-supply 15V DC, 300mA LNB-supply 13V, 18V, 22kHz, 300mA
LSA Optical Input L-Band Splitters
GENERAL
rf-Design | Darmstädter Str. 230 | 64625 Bensheim | Germany General Headquarters: Sales/Marketing/Projects:
Tel: +49 (0) 62 51-93 89 85 | Fax: +49 (0) 62 51-93 89 87 | www.rf-design-online.de | eMail:
[email protected] Tel: +49 (0) 361- 78 96 23 40 | Mob.: +49 (0) 175-43 79 860 | www.rf-design-online.de | eMail:
[email protected] © 01/2011 RF-Design (Rev.01) Subject to modifications
