Preview only show first 10 pages with watermark. For full document please download

Lsu1supb9 Service Processing Engine

   EMBED

Share

Transcript

Manual Version: AP100-20121228 BOM: 3123A0NQ Part number: 5998-4099 LSU1SUPB9 Service Processing Engine 1 Card identifier The mark LSU1SUPB9 is printed at the upper left corner of the front panel, and is used to identify the card. 2 Specifications Table 1 LSU1SUPB9 specifications Item LSU1SUPB9 Processor MIPS64 (Quad Core), 1.2GHz Memory 8GB DDR3 SDRAM (2 DIMM slots) Flash memory 500MB NVRAM 512KB Power consumption 45 W to 50 W Connector RJ-45 Port quantity • One console port • One 10/100/1000BASE-T management port Interface transmission speed • Console port: ≤ 115,200 bps (default: 9,600 bps) • 10/100/1000Base-T port: 10/100/1000 Mbps (half/full duplex) • Console port: Ordinary asynchronous serial port cable; maximum Cable and maximum transmission distance transmission distance: 15 m (49 ft). • 10/100/1000Base-T port: Category-5 twisted pair; maximum transmission distance: 100 m (328 ft). Applied to HP FlexFabric 11900 Switch Series 3 Obtaining documentation For card installation, see HP FlexFabric 11900 Switch Series Installation Guide. For software upgrade, see HP FlexFabric 11900 Switch Series Software Upgrade Guide. To find related documents, browse to the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals © Copyright 2012 Hewlett-Packard Development Company, L.P. The information in this document is subject to change without notice. 5998-4099 i