Transcript
i Smart
LTC Series 2nd Gen SDI Lecturer Tracking System
Features
LTC Series 2nd Generation HD-SDI Lecturer Tracking System
Unmanned and standalone tracking Tracking performance is realized by the system itself, both its two lens manage the tracking algorithm, there is no need to have manual operation or have extra devices / sensors to assist tracking.
Video demo @
Precise lock and track capability
http://youtu.be/FBgCNrb8bW4
Tracking is based on both face detection and motion detection technology, which ensures smooth and precise lock & track performance even in comprehensive scenarios.
Smart tracking performance The system does not track on minor movements, it has tilt motion and auto zoom function to keep tracking lecturer properly once lecturer moves closer / farther, once object is lost, the system moves back to pre-defined position and keeps tracking at that position.
Priority tracking zone and blocking zones The system provides one configurable priority tracking zone where the tracked lecturer is picked up, there are also eight blocking zones used to block interference sources like projectors, windows, fans and etc.
No “fish-eye” at full view lens The small full view lens of the tracking system addressed geometric distortion problem, It can be used as a standard image to shot lecturer area.
LTC series 2nd generation HD-SDI lecturer tracking systems is a standalone tracking device, there is no need to have extra devices / sensors to assist tracking. It adopts the most state-of-the-art face and motion detection technology to precisely lock and track lecturer. Both its two lens can output HD 1080p60 image through HD-SDI interfaces, the full view lens addressed geometric distortion problem. Connection and configuration of the system has never been so easy.
Easy connection, configuration and communication The system comes only with HD-SDI video interfaces, power and control interfaces, it is easy to connect your system. The system provides a free PC based control software to manage tracking and other configuration. It supports standard VISCA & Pelco D protocols to communicate seamlessly with your control device.
03 - 04
i Smart
LTC Series 2nd Gen SDI Lecturer Tracking System
Technical Data Model
Typical Implementation LTC-A2001
Tracking Camera Image Sensor
1/2.8" Exmor CMOS, 2.14MP
Lens
f=4.7mm - 94.0mm; F1.6 - F3.5
Zoom
Optical: 20X; Digital: 12X
Field of View
59.5° - 2.9°
Focus
Auto, Manual, One Push
Min. Illumination
0.5 lux (Color), 0.1lux (B/W)
Shutter Speed
1/1 ~ 1/10,000s
LTC-A2001
Gain
Auto / Manual
White Balance
Auto, Indoor, Outdoor, One Push, Manual
Exposure
Auto, Manual, Shutter Pri, Iris Pri
S/N Ratio
≥50dB
LAN/WAN
Full View Camera Image Sensor
1/2.8" Exmor CMOS
Effective Pixel
2.14MP
White Balance
Auto
Software Capture Solution
Exposure
Auto
Field of View
Horizontal: 92°; Vertical: 50°(before geometric distortion correction)
Lens
3.73mm
PTZ Pan/Tilt Angle
Pan: -170° ~ +170°; Tilt: -30° ~ +90°
Pan/Tilt Speed
Pan: 0.1° ~ 120°/s; Tilt: 0.1° ~ 90°/s
Preset Number
256
Comm. Interface
RS-485, RS-232
Ethernet
RJ45, 100M(for upgrading firmware use only)
Protocol
PELCO-D, VISCA
Video Video Output
HD-SDI (2 channels)
Video Format
HD: 1080p/60, 1080p/50, 1080p/30, 1080p/25, 1080i/60, 1080i/50, 720p/60, 720p/50
LTC-A2001
General Power Supply
DC12V
Power Consumption
＜20W
Working Temp
0°C ~ +40°C
Storage Temp
-20°C ~ +60°C
Dimension
225mm * 212mm * 163mm
Weight
1.96KG
Color
Grey
Portable Capture Solution
Rear View & Installation
1 2
LTC-A2001
3 4 5 6
1
Reserved
4
HD-SDI 2
2
Upgrade Port
5
RS232 / RS485
3
HD-SDI 1
6
Power
Wall Bracket
LAN/WAN
Ceiling mount
Hardware Capture Solution
05 - 06
