Transcript
PROJECT INFORMATION
TYPE:
PROJECT:
CATALOG#:
LTD80 - 10W CONCEALED LED TRACK HEAD 3 CIRCUIT / 1 NEUTRAL TRACK LUMINAIRES
3 CIRCUIT / 1 NEUTRAL TRACK LUMINAIRES FEATURE:
8 3/8" Max
4 3/8" 5 3/8"
2 7/8"
*Not recommend for distances less than 8'. Front Loading Design. Accommodates LP303 Accessory Holder, for use with L8 Series Lenses and LP222 Louver
SPECIFICATION
COMPATIBILITY
120V 10W LED Application: Architecturally styled heads offer a fully enclosed lamp envelope to help capture any stray light released from the back of the fixture. Their studio designs are a perfect compliment to any interior design. Where energy efficiency and an attractive lumen output is a must in retail and commercial environments, with up to five times the lumen output of traditional halogen lamp sources, these LED track heads are a perfect fit. Used for effective highlighting of retail merchandise and displays. The 3000K+ light source insure an attention grabbing result. Mounting Yoke Fully adjustable (358/90 degrees) high strength steel mounting yoke. Connector: Factory Installed specification grade 3-circuit 1-neutral track connector. Driver: Electronic Constant Current driver integrally mounted in fixture casing.
LP
LPC
1 CCT TRACK CHANNEL
2 CCT TRACK CHANNEL
Note: Wattage limitations on compatible items must be met.
LED Details: 10W 450+ Lumens Delivered Color Rendering Index (CRI): 80 Color Temperature: 3,000K Lamp Equivalents: 50W MR16, PAR20, PAR30
Power Connection: LED heat sinked lamp module is replaceable via onboard quick exclusionary disconnect terminal. No tools required. Meets CA Title 24 Requirements and other standards restricting the use of Medium Base or Bi-Pin Sockets. Lumen Maintenance: Minimum 35,000 hours L70 life based on ANSI TM-21 calculations from LM80 standardized test results. Thermal Management: Effective thermal dissipation facilitated by integral cast-aluminum, finned heat sink design for maximum heat rejection to provide long LED life. Safety Labels: ETL/CETL listed. Suitable for dry locations only.
Warranty: Covered by a 3 Year Warranty to be free of defects in materials and craftsmanship. Recommended for applications where ambient temperatures do not exceed 35°C, installations exceeding this temperature will result in reduced LED lamp life and a voided warranty. Finish: Available in Black, Natural and White. Beam Spread: Available in Flood, Narrow Spot*, Super Wide Flood (SOL Lens) and Wide Flood. Label: cETL Listed Assembled in USA
ORDERING LTD80 LTD80
ORDERING EXAMPLE : LTD8010N-B08-3C1N-27 WATTAGE 10 :10W
DIMMING Blank:None -27 :277V
A
Tel: 323.904.0200
Product specifications subject to change without notice.
www.liton.com
D I V I S I O N
L I G H T I N G
O F
G R O U P
ID#: 2190
FINISH BEAM SPREAD B :Black -B08-3C1N :Narrow Spot* N :Natural -B120-3C1N :Super Wide Flood (SOL Lens) W :White -B45-3C1N :Flood -B60-3C1N :Wide Flood
File Located online www.liton.com/spec
2015.11.4
Color Temperature Temperature: Comes standard with 3,000K Warm White LED's binned according to ANSI C78 377A for color temperature and chromaticity ranges. Available with other color temperatures with ANSI binning of 2,700K, 3,500K & 4,000K. To order use "-T" Suffix followed by color temperature. Example 4000K= T40. Consult factory as extended lead times apply.
