Transcript
Test & Measurement Equipment 1
VENTUS 1.0 / USB 2.0 Multi-Standard Signal Generator & Modulator VENTUS F1 / Production Multi mode Test Transmitter
DAB/DAB+ Total Solution for Automotive
VENTUS 1.0 / USB 2.0 DAB / Multi-Standard Signal Generator VENTUS 1.0 Option Upgrade / DAB+ Ensemble Multiplexer Portable on-air DAB Analyzer / DAB/DAB+/DMB RF field Monitor & Analyzer DMM402 / PCI type of DAB Modulator & RF Up converter WEIVER / RF Capture & Playback System WEIVER Player / RF Player
Test & Measurement Equipment 2
T-SCOPE / MPEG-2 Transport Stream Analyzer VENTUS-A / DVB-ASI Input and Output Adapter for USB DMM-402/ UPC-231 / T-DMB/DAB+ PCI Modulator WEIVER / RF Capture and PlayBack System WEIVER Player / RF PlayBack
Broadcasting Equipment
November
HD Encodulator / AII in one HD Encoder + DTV Modulator BAT-3SH / HD/SD/3G-SDI to HDMI Video and Audio Converter BAT-3HS / HD/SD/HDMI Video and Audio Converter) BAT-SA / HD/SD-SDI to Analog Video and Audio Converter BAT-AS / HD/SD Analog to SD/HD-SDI Audio Converter
01 Test & Measurement Equipment
DAB+/ DMB Muxer
T-PUMP
(Application for VENTUS 1.0)
Specifications
Ω Ω Ω
Key Features Versatile Multi-Standards in a single USB 2 portable transmitter and easy upgrade to other standards through on-line service. Truly short switching time to another mode. Frequency range 50-870 MHz, L-Band (option) : 1.452 - 1.492 GHz / S-Band (optional) : 2.633 - 2.660 GHz. Integrated Power Amplifier & Attenautor : -110 dBm ~ + 10 dBm (0.1 dB step) Low phase noise and high MER. Latest User-friendly application and API (design your own application) can be downloaded from Web based download Center freely. Auto-Test Mode. Real-time signal with selectable Modulation and coding parameter. Integrated white noise generator (optional). TS stream player, TS Recorder, TS Analyzer. Remote Control via U5B 2.0 from general Laptop. (Max 4 'VENTU5’ units can be operated from one PC). Low power consumption. Real-Time Modulation (ASI In to RF Out) :ATSC, DVB-T/H, DVB-C, OpenCable modulation. Auto temperature compensation. Fan-less heat dissipation design. LUMANTEK Catalogue No.22 /2011-
01 Test & Measurement Equipment
Production Multi mode Test Transmitter
Intergrated RF attenuator for high output levels In mass production purpose of test instrument, the signals of various signal generators are combined in a coupling network and then distributed over large capacity. VENTUS F1 offers an optional amplifier for this purpose which can be installed directly in the instrument. VENTUS F1 thus offers extremely high-end a level of performance.
User Centric Mind of control elements and remote operation AII functions need to be manageable directly on the instrument. On the other hand, it can be possible to configure and monitor all instruments of the entire system via remote control. VENTUS F1 makes that both of way possible - with a keypad and display on the front panel on the one hand and a convenient GUI (T-PUMP) on Embedded Window 7 based for remote operation on the other.
Sample Block diagram in Assembly Line Factory In the mass production of terminal consumer products such as LCDTV, PMP and Mobile hand set TV, number of test signals for multi-standards modulation are required at various frequencies and with different sources. The required signal generators are usually equipped in signal center. The different signals sources are combined in a coupling network and distributed to the each single test site in the production line through a cable, for each frequency, a baseband signal is generated, modulated to the corresponding RF, and then amplified to a RF level before being fed to the distribution network. VENTUS F1 is purely designed for those demands.
01 Test & Measurement Equipment
Key Features Embedded Window 7 stand alone signal generator. Multi-Standards in a single 1 RU Test Transmitter Instant, one-click programmable Modulation Option upgrades without costly downtime and unnecessary trips to the factory Truly short switching time to another mode. Frequency range 50-870 MHz in 1 Hz step. Integrated Power Amplifier +10 dBm to -30 dBm(Basic) ,+10 dBm to -110 dBm(Option ), +20 dBm to -20 dBm (optional) Low phase noise and high MER Latest User-friendly application and API (design your own application) can be downloaded from Web based Download Center freely (http://www.lumantek.com) Real time signal with Selectable Modualtion and coding parameter. Direct Stream Play out from external USB memory. Integrated white noise generator (option). TS stream player,TS Recorder, TS Aanalyzer. Best Optimized for use in mass production test system with local control from front LCD panel, and Can be remote controlled from UDP/IP and also remote controlled from PC Monitor, Mouse, that case is operated by via the same convenient Graphical user interface( T-PUMP) as is used for VENTUS F1 and VENTUS 1.0. Low power consumption. Intenal SSD (ROM & Storage) with lightning-fast read/write speeds. Auto temperature compensation. FCC & CE certified.
Specifications Parameter
RF Signal
Modulation Modes
TS generator AWGN TS Recorder
System Platform
Value
Conditions Frequncy Range
50MHz to 870MHz
Frequncy Range
1KHz
Output Power
+10dBm ~ -30dBm / +10dBm ~ -110dBm (optional) / +20dBm ~ -20dBm (optional) 0.1dB step
Output Power Accuracy
< +-1dB
Spectral Purity
<–60dBc @ Full Bandwidth
Terrestrial DTV
DVB-T, DTMB, ISDB-T, ATSC
Cable DTV
DVB-C, OpenCable
Mobile DTV
CMMB, ATSC-Mobile DTV, DVB-H, T-DMB, ISDB-T 1seg, T-DMB
Digital Sound Broadcsting
DAB/DAB+
Multiplxer
CMMB Multiplxer, ATSC Mobile Multiplxer
ASI OUT
Transport stream play
All standard mode
20 M bandwidth
ASI IN
Transport stream recoding / real time modulation (ATSC, DVB-T/H/C, OpenCable)
OS
Embedded Window 7
Storage
32GB SSD or extrenal USB Memory
USB 2.0
4 port of USB 2.0
VGA
1 Port of VGA Terminal
Ethernet
10/100BaseT, RJ-45
Remote control
IP Network
Power
90 VAC ~ 240 VAC, 50/60Hz
Dimensions
427mm×44mm×450 mm (16.81in×1.73in×17.72 in)
Weight
< 5kg
LUMANTEK Catalogue No.22 /2011-
02 DAB/DAB+ Total Solution for Automotive
VENTUS 1.0 USB 1.0 DAB / Multi-Standard Signal Generator
Specifications 50MHz to 1.0GHz
Ω Ω Ω
DAB+ Ensemble Multiplexer Ventus 1.0 Option Upgrade Support dynamic reconfiguration ・Support file format ETI structure data(*.eti) MP1L2 elementary stream data(*.mp2) AAC elementary stream data(*.aac) M4onM2(MPEG-4 on MPEG-2) TS(*.ts)
・Editable element DAB modes : I, II, III, IV Ensemble : ID, name Service : ID, name, link info, announcements, program type Component : SCID, SCIDs, name, language Sub-channel: ID, protection mode, FEC scheme Insertion extra FIG data
・Compatibility ETSI EN 300 401 v1.4.1 main DAB standard
02 DAB/DAB+ Total Solution for Automotive
DAB/DAB+/DMB RF field Monitor & Analyzer USB Type Portable On-Air Analyzer • General Information -
USB powered portable applications support DAB Ensemble Status Diagnostics RF logging/reporting, graphical signal level status Real time recording of sub channels for off-line applications FIC, MPEG2-TS/MPEG4 in-depth Analysis A/V service monitoring (H.264, BSAC/AAC+) Data service monitoring (DLS, Slide Show, BWS, BIFS, TPEG) Reconfiguration information display Field monitoring with GPS Services PC player for Musicam/DAB+ Audio, A/V(H.264, BSAC/AAC+), BIFS, TPEG - SNMP Trap and SMTP Email support for Alarm - Auto streaming function
• Player - DAB+, Musicam Audio Decoding - A/V (H.264, BSAC/AAC+) with, or without BIFS - MOT (BWS, Slide Show, DLS) data play - TPEG data play
• Monitor/Analysis - Musicam/DAB+ monitor & analysis - MOT (BWS, Slide Show, DLS) data monitor & analysis - MPEG2-TS/MPEG4 monitor & analysis - BIFS monitor & analysis - TPEG-TDC/MOT monitor & analysis
• Field Monitor - Real time GPS synchronization with DABAir-Plus - Off-Line MAP synchronization with field-saved data - Display location, signal level, BER status, TPEG data on the MAP - Off-line analysis of field-saved data
PCI type of DAB Modulator & RF Up converter PCI Bus DAB / DAB+ / DMB Signal Generator
DMM-402 (DMB/ DAB+ PCI Modulator) Specifìcation RF Step Attenuator 0~-120dBm T-DMB/DMB + Modulator PCI BUS Compliant with EN 300 401 and ETS 300 799 Supportto all DAB Mode I/II/III/IV Modes Easy ETl stream Playout High Performance modulation(MER, IF Stability and others) Support device driver and API Window XP Offrt double IQ SMA port Output Frequency : Band II/III and L-BAND 2 X IQ Output Support Output Voltage :1 Vp-p Output Impedance : 50 Connector : SMA-Connector
LUMANTEK Catalogue No.22 /2011-
02 DAB/DAB+ Total Solution for Automotive
WEIVER
RF Capture & Playback
Key Features Comprehensive real-time RF waveform capture and playback functionalities rolled up into a single, versatile package. Ultra small footprint and lightweight for convenience and hassle-free mobility (approx. 6.5kg). Lowest Power Consumption(available Automotive cigar power use:<50W). Simultaneous Capture & Playback, Auto RF Optimizer, AGC. Frequency range : 30MHz to 1.015 GHz and bandwidth (8MHz or 24MHz). Arbitrary Waveform Generator with I/Q. Instant, one-click programmable upgrades. External trigger function. 2 highly-stable, intenal SSD (ROM & Storage) with lightningfast read/write speeds. Flexible e-SATA connectivity for real-time capture and playback from external SSD (optional). Secure, versatile connectivity : WiFi module and Gigabit LAN 2 ports for convenient operations via the notebook. Built-in GPS module with data (NMEA-protocol ) compatible with 3rd party mapping services(google map). Attractive sales point and value for money (Low TCO). Versatile connectivity options available ( Ad-Hoc, Wireless LAN, Direct Connect ).
WEIVER
RF Playback
- Frequency Range : 50MHz to 1.015GHz and bandwidth (8MHz or 24MHz) - Arbitrary waveform Generator with I/Q - External trigger function - Secure, versatile connectivity : Gigabit LAN port for convenient operations via the computer - Front control via LCD panel - TCP/IP control via LCD panel - SSD Hot Swap - Restore SSD(C) through provided USB disk
03 Test & Measurement Equipment
MPEG-2 Transport Stream Analyzer
T-SCOPE Key Features
ATSC, DVB-C, DVB-S, DVB-T and OpenCable DTV standards compliant. Multiple physical layer interface. Real-time and offline RF analysis: BER, MER, EVM, RF power and constellation. ETSI TR 101 290 Priority with real-time 3-stage error monitoring reporting and error logging. Diagnostic and verification of MPEG designs. PCR & PTS analysis, arrive time graphing, measurement display and jitter analysis. Triggered recording. Data rate analysis. Table and packet views. SI/PSI & PSIP view and interval analysis. CAS view: ECM and EMM repetition rate and update time. PES header analysis. Real-time A/V decoding.
A MPEG-2 Transport Stream analyzer for real-time analyzing, monitoring and decoding for VENTUS 1.0. The T-SCOPE is compatible with ATSC, DVB-C, DVB-S, DVB-T and OpenCable modulations. T-SCOPE is the best solution for OEM manufacturers who seek the best of the best for designing and verifying digital TV equipment.
LUMANTEK Catalogue No.22 /2011-
03 Test & Measurement Equipment
DVB-ASI Input and Output Adapter for USB
VENTUS-A Features
Applications
- Single DVB-ASI input and single DVB-ASI output adapter for USB(half duplex) - Packet size conversion support: 188 bytes to 204 bytes, 204 bytes to 188 bytes - Null packet removal and insertion support - PCR re-stamping support - Hardware based input rated monitoring - 8Mbytes hardware buffer reduce host CPU processing jitter - Efficient USB DMA transfer reduces host CPU processing time - Free SDK(API library and example application source codes) and drivers for Windows - Same API and driver with VENTUS-1.0, DTV signal generator. - MPEG2 TS play and capture with T-Pump software - MPEG2 TS analysis and capture with T-Scope software
- PC based MPEG2 TS recorder, analyzer - PC based decoder - PSI/PSIP Generator - IP-to-DVB and DVB-to-IP gateway - Advertisement inserter
Specification - USB: USB 2.0, bus powered, no power supply required - ASI input connector: 75Ω BNC, 1ea - ASI output connector: 75Ω BNC, 1ea - Output bit-rate: 0~108Mbps (in 1bps step) - Input bit-rate: 0~216Mbps - Output/Input modes: 188/204 bytes packet mode - OS support: Windows 7, XP, 2000
T-DMB/DAB+ PCI Modulator
DMM-402/ UPC-231
Overview The DMB/DAB+ Multi Signal OEM PCI Generator, designed to meet all requirements encountered in DMB/DAB+ receiver Production supports not only Eureka-147 OFDM Modulation, Ibut also RF up-converter which supports Band I,II,III, L with output power control from 0dBm to ~120dBm in 0.5dB step. ln addition to complete DAB Auto testing applications, and provide API for design your own APPs.
DMB / DAB+ Signal Generator Apps Max RF Level Test (0 - -120 dBm ) Min RF Level Test (0 - -120 dBm) AII Frequency ScanTest DMB / DAB Test Pattern Library DVD Provided Easy Configuration profile save and recall User-friendly Interface 1 DMB PCI Modulator can be combined with Maximum 2 RF Up-converters (optional)
03 Test & Measurement Equipment
DMM-402 (DMB/ DAB+ PCI Modulator) Specifìcation T-DMB/DMB + Modulator PCI BUS Compliant with EN 300 401 and ETS 300 799 Supportto all DAB Mode I/II/III/IV Modes Easy ETl stream Playout High Performance modulation(MER, IF Stability and others) Support device driver and API Window XP Offrt double IQ SMA port Output Frequency : Band II/III and L-BAND 2 X IQ Output Support Output Voltage :1 Vp-p Output Impedance : 50 Connector : SMA-Connector
UPC-231 (Band II, III, L RF Up-converter)Specifìcation This product provides Upconverter function of Multiple RF signals such as Band II, Band III and L-Band. You can use this product for your application with our other products such as DMM - 402, T-DMB Modulator PCI Adaptor. Selectable Band II / III or L-Band transmission and configuration 12 C Interface - Support daisy Chain configuration
Specifications
LUMANTEK Catalogue No.22 /2011-
03 Test & Measurement Equipment
RF Capture and PlayBack System Built-in GPS on Google map
Technical Description The RF Down-converter can receive 30MHz -1.015 GHz RF signal and downconverts to 75MHz IF. Capture worldwide broadcasting standards of DTV (ATSC, DVB-T/H, DVB-C, DMB, CMMB, DTMB, ISDB-T/B, OpenCable, and ATSC-M/H), Radio Broadcasting ATV (NTSC, PAL), RDS, TMC. Weiver is equipped with a GPS module for accurate locative information to evaluate the strength of the RF signal. The GPS information is stored in the NMEA protocol and the GPRMC information is stored in a second log file. An active Antenna GPS is used. Weiver via input port enables the incoming reference signal to be synchronized at 10MHz frequency.
Key Features
Spectrum Analysis / RF Power / IQ Signal / GPS
・Comprehensive real-time RF waveform capture and playback functionalities rolled up into a single, versatile package.
・Ultra small footprint and lightweight for convenience and hassle-free mobility (approx. 6.5kg).
・Lowest Power Consumption(available Automotive cigar power use:<50W).
・Simultaneous Capture & Playback, Auto RF Optimizer, AGC. ・Frequency range : 30MHz to 1.015 GHz and bandwidth (8MHz or 24MHz). ・Arbitrary Waveform Generator with I/Q. ・Instant, one-click programmable upgrades. ・External trigger function. ・2 highly-stable, intenal SSD (ROM & Storage) with lightning-fast read/write speeds.
・Flexible e-SATA connectivity for real-time capture and playback from external SSD (optional).
・Secure, versatile connectivity : WiFi module and Gigabit LAN 2 ports for convenient operations via the notebook.
・Built-in GPS module with data (NMEA-protocol ) compatible with 3rd party mapping services(google map).
・AII-aluminum construction for industrial-strength durability.
・Attractive sales point and value for money (Low TCO). ・Versatile connectivity options available ( Ad-Hoc, Wireless LAN, Direct Connect ).
・Export feature for reporting and documentation (.xls format).
In the Recording mode, the RF signal's contextual status (Spectrum, Power View, I/Q Graph and GPS locative information with Google Map) can be monitored and recorded. In the Playback mode, the recorded I/Q data can be played after the user finds the associated GPS locative information as well as the Power information from the log data. The user can simulate the RF signal conditions as exactly as it was recorded.
03 Test & Measurement Equipment
WEIVER Working Diagram
WiFi Connection
Capturing & Playback
FRONT
Control & Monitoring
REAR Collapsible Handle
Protective Bumper
1. RF Out
16. WiFi Ext. Antenna Port
1
7. Cooling Fan (Out) 8. e-SATA Port (hot swap)
2. RF In
15. Gigabit LAN Port
3. REF In(10 MHz)
(Direct Connection)
4. Trigger In
14. USB 2.0 Ports (x4)
5. GPS In
9. Gigabit LAN Port (Ethernet Connection)
6. Multi-color LED Status
13. VGA Port
(RF In / RF Out / GPS / Power)
12. DC Power Jack Sleek but sturdy Aluminum construction 11. Reset Button 94 mm
10. Power Button
3D Spectrum
Spectrum Analyzer Detail Resolution System Operation : Weiver can be conveniently accessed and remote-controlled by a notebook via secure WiFi connectivity. 2D Spectrum
Spectrum Analyzer View : The Spectrum Mask GUI can be viewed in either 2D or 3D Shape. Also there are Zoom, Mark and Band-Power functions for viewing in detail and measuring the spectrum mask.
Band Power
LUMANTEK Catalogue No.22 /2011-
03 Test & Measurement Equipment
Play Mode WEIVER System Spec
Frequency
Capture Mode Frequency Frequency band
30MHz to 1.015GHz
Real time bandwidth
8MHz, 24MHz
Frequency resolution
1Hz min.
Resolution bandwidth
8MHz, 24MHz (1KHz, 3KHz, 5KHz, 10KHz)
Temperature stability
±1PPM
Initial achievable accuracy
±2PPM
Aging (PER year)
±1PPM
IF band
Calibration
Frequency band Real time bandwidth Frequency resolution Temperature stability Initial achievable accuracy Aging (PER year)
50MHz to 1.015GHz 8MHz, 24MHz 1Hz min ±1PPM ±2PPM ±1PPM
RF Output Characteristics Gain range Amplitude resolution Amplitude accuracy Power
-30 ~ +30dBm (Input Level based) 0.1dB step (Min.) ±1dB Max. +10dBm Calibration
Environment Resolution
16 bits
Sampling rate
60 MS/s
Frequency
75 MHz
1 year RF input port 50ohm, N type female, DC-coupled
Storage Storage(default)
256 Gbyte
Recording time ( BW 8MHz )
100 minutes(approx.)
Recording time ( BW 24MHz )
30 minutes(approx.)
Spectral Purity ≤ -85dBc/Hz ≤ -95dBc/Hz ≤ -100dBc/Hz
Operating temperature Relative humidity Storage temperature
±1dB 0 ~ -130dBm -10 ~ +45dB 0.1dB ±50 VDC
Noise density Pre Amp OFF Pre Amp ON
RF output port
Overload Protection on RF Output Max. reverse RF power
1 W (Max.)
DC Input
±50 VDC (Max.)
Power
50ohm, N type female DC-coupled
Adaptor spec
Input power
+18 VDC
Power Consumption
50 Watt
AC INPUT : 100-240V ~ 3-1.5A, 50-60Hz DC OUTPUT : 18V 4.5A
Spectral Purity
≤ -85dBc/Hz ≤ -95dBc/Hz ≤ -100dBc/Hz
Amplitude Input level accuracy Input dynamic range(CW tone) Gain range Input level resolution Max. DC input
1 year
0 to +50 90% -20 to +70
Spurious Responses 2nd Harmonic 3rd Harmonic
≤ -45dBc ≤ -55dBc
Environment < -145dBm/Hz < -160dBm/Hz
Operating temperature Relative humidity Storage temperature
0 to +50 90% -20 to +70
Environment Operating temperature
0 to +50
Relative humidity
90%
Storage temperature
-20 to +70
Mechanical Dimensions Weight
(L)370mm x (W)284mm x (H)94mm 6.5 kg (Approx.)
03 Test & Measurement Equipment
RF PlayBack System
Player
Playback of real world RF signals recorded with WEIVER platform to re-generate real world RF environments that are too complex To exact simulate.
- Frequency Range : 50MHz to 1.015GHz and bandwidth (8MHz or 24MHz) - Arbitrary Waveform Generator with I/Q - RF Step Attenuation : -30 ~ +30dB in 0.1dB Step (based on Input Level) - External trigger function - Secure, versatile connectivity : Gigabit LAN port for convenient operations via the computer - Front control via LCD panel - Remote controlled from PC Monitor, Mouse, that case is operated by via the same convenient Graphical user interface(WEIVER.exe) - TCP/IP Remote control - Front access hot swappable SSD drives for smart and easy playback
Individual I/Q Play-Back – Case Study WEIVER Player
Digital & Analog Radio
Mobile TV Direct Recording to external SSD via e-SATA Digital TV
LUMANTEK Catalogue No.22 /2011-
03 Test & Measurement Equipment
WEIVER Player Operation
Front panel control & External SSD
WEIVER Operation via External Mornitor
Hot swappable SSD drives
WEIVER Player Rear View
Specification Play Mode Spurious Responses
Frequency Frequency band Real time bandwidth
38MHz to 1.012GHz Adjustable bandwidth from 8MHz to 24MHz
2nd Harmonic 3rd Harmonic
Frequency resolution Temperature stability Initial achievable accuracy Aging (PER year)
1Hz min ±1PPM ±2PPM ±1PPM
Environment
RF Output Characteristics Gain range Amplitude resolution Amplitude accuracy Power
≤ -45dBc ≤ -55dBc
Operating temperature Relative humidity Storage temperature
0 to +50 90% -20 to +70
Mechanical -30 ~ +30dB (Input Level based) 0.1dB step (Min.) ±1dB Max. +10dBm
Dimensions Weight
(L)332mm x (W)218mm x (H)105mm 5.3 kg (Approx.)
Spectral Purity
≤ -85dBc/Hz ≤ -95dBc/Hz ≤ -100dBc/Hz
Environment 0 to +50 90% -20 to +70
Operating temperature Relative humidity Storage temperature
Calibration 1 year
Overload Protection on RF Output Max. reverse RF power
1 W (Max.)
DC Input
±50 VDC (Max.)
Power Input power
100-240V ~ 3-1.5A, 50-60Hz
Power Consumption
40 Watt
Adaptor spec AC INPUT : DC OUTPUT :
100-240V ~ 3-1.5A, 50-60Hz 18V 4.5A
RF output port 50ohm, N type female DC-coupled
04 Broadcasting Equipment
AII in one HD Encoder + DTV Modulator (ATSC/OpenCabIe/DVB-T /DVB-C/ISDB-T/DTMB)
HD Encodulator for Professional Head End The HD Encodulator is professional HD encoder including digital modulator as like ATSC, OpenCable, DVB-T/C, ISDB-T, and DTMB. This product has variable interfaces with HDMI, HD-SDI, Y/Pb/Pr, ASI, Analog Stereo Audio(L/R), SPDIF (optical/coaxial), and AES/EBU. So it’s variable interfaces make this product ideal for broadcasting systems as like MATV systems in company building and apartment, education broadcasting system at school and government building.
Features
・Encoder plus DTV modulator in one rack unit case ・Video and audio CODEC selectable: MPEG2/H.264 MPEG1-L2/AC3/AAC ・Versatile input ports: HDMI, HD-SDI, Y/Pb/Pr, ASI, Analog Stereo Audio(L/R), SPDIF (optical/coaxial), and AES/EBU ・High power RF output (10dBm for 1ch) ・Variable DTV modulation options ( ATSC, OpenCable, DVB-T/C, ISDB-T, DTMB ) ・4 adjacent RF channel output option for some, modulations ・Internal PSI/PSIP generation or external input, through ASI Input port ・Firmware update and control through web server ・HTTP and SNMP control with 100BaseT System Diagram
LUMANTEK Catalogue No.22 /2011-
04 Broadcasting Equipment
Video Encoder Input : HD-SDI, HDMI, Y/Pb/Pr HD Resolutions and frame(progressive) or field(interlaced) rates: - 1920x1080 at 60p, 50p via internal interlacer (convert to 60i, 50i, respectively) - 1920x1080 at 60i, 59.94i, 50i, 30p, 29.97p, 25p, 24p, 23.97p - 1280x720 at 60p, 59.94p, 50p. SD Resolutions and frame/field rates: - 720x480: 59.94i - 720x576: 50i MPEG2 HD/SD Encoder - ISO/IEC 13818-2 (MPEG2 HP@HL, MP@HL, MP@ML) - HD video bit rate: 25~0.5 Mbps. - SD video bit rate: 25~0.5 Mbps. - Sub 1.5 seconds encoder latency, configurable.
H.264 HD/SD Encoder - Baseline, Main and High Profiles support - HD video bit rate: 25~0.25 Mbps. - SD video bit rate: 25~0.25 Mbps. - Sub 0.8 seconds encoder latency, configurable. Maximum TS bit rate: 30 Mbps. Advanced Settings(option) - GOP structure: Automatic/IP/IPB/IPBB/IPBBB, open/closed, size 1 to 300. - Adaptive I-frame insertion: enable/disable. - Bit rate control: CBR, VBR and capped-VBR - MCTF strength: 0(off ) to 7(maximum). - Inverse Telecine enable/disable. - Scene change detection and fade detection enable/disable.
Audio Encoder Input : SDI embedded, HDMI embedded, SPIDIF(Optic/Coax), AES-EBU(BNC), Analog Stereo Sample rate converter Dolby Digital CE Stereo Encoder (for ATSC, DTMB) - Output bit rates: 128/192/256/384 Kbps - Encoding sample rates: 48 KHz MPEG-1 Layer II Stereo Encoder (for DVB-T, DTMB) - Output bit rate: 192/224/256/320/384 Kbps - Encoding sample rates: 32/44.1/48KHz AAC-LC, HE-AAC v1, HE-AAC v2 Stereo Encoder (for ISDB-T) - Output bit rate(LC):32/48/56/64/80/96/112/128/160/192/224/256/320/384 Kbps - Output bit rate(HE-AAC v1): 32/48/56/64/80/96/112/128/160/192 Kbps - Output bit rate(HE-AAC v1): 32/48/56/64/80/96 Kbps - Audio sample rate: 32/44.1/48KHz Pass-through of Dolby Digital Stereo/5.1ch, MPEG-1 Layer II and AAC-LC audio support.
PSI/SI/PSIP PSI/SI: PAT, PMT generation enable/disable PSIP: MGT, TVCT/CVCT generation enable/disable, - Short name, major and minor channel number setting External PSI/PSIP generator input via “ASI IN” port
Management Front panel: 4-line text LCD, 6buttons RS-232 local console Web GUI / SNMP(Option)
< 1 HD encoder / Basic>
Physical Dimension: 44(H) X 483(W) X 402(D, excluding connectors) Temperature: 0~45℃ Weight: 4 Kg Power Consumption: 45W max.
Physical Dimension: 44(H) X 483(W) X 402(D, excluding connectors) Temperature: 0~45℃ Weight: 4 Kg Power Consumption: 45W max.
< 1 HD encoder / Option : RF Output >
04 Broadcasting Equipment
ATSC(8VSB) Modulator Modulation Mode: 8VSB Symbol Rate 10.762 MSps
DVB-T Modulator SNR(MER): >35 dB
ATSC(8VSB) Modulator 1~4 adjacent RF channel configurable 1 channel from internal encoder. Other 3 channels are from extra DVB-ASI inputs Reduces total cost of ownership via superior RF performance, installed density and power consumption.
Open Cable Modulator Standard: ITU-T J.83 Annex B Constellation types & Symbol Rates: - 64QAM: 5.057MSps - 256QAM: 5.361MSps Channel Bandwidth: 6MHz SNR(MER): >40dB
Modulation Mode: QPSK, 16QAM, 64QAM Transmission Mode: 2K, 4K, 8K Channel Bandwidth: 5, 6, 7, 8 MHz Code Rate: 1/2, 2/3, 3/4, 5/6, 7/8 Guard Interval: 1/4, 1/8, 1/16, 1/32 SNR(MER): >40dB
DTMB Modulator Single Carrier & TDS-OFDM modulation support Modulation Mode: QPSK, 16QAM, 32QAM, 64QAM Standards - GB20600-2006, ISO/IEC 13838-1, EN 50083-9. - OGY/T 229.1-2008 (SIP) SNR(MER): >40 dB
ISDB-T/Tb Modulator Modulation Mode: ISDB-T Layered OFDM Standard: ARIB STD-B31 TMCC Encoding: Fully supported SNR(MER): >40dB
RF Output Main Output: F-Type 75Ω 1ea @ rear -20dB Output: F-Type 75Ω 1ea @ front Maximum Output Level for 1ch: +10dBm Maximum Output Level for 2ch: +5dBm Maximum Output Level for 3ch: +2.5dBm Maximum Output Level for 4ch: +1dBm Level Adjustment: 0~-27dB in 0.5dB steps Center Frequency Range: 30~999 MHz Spurious: <-60dBc relative to output level Harmonics: <-45dBc Return Loss: >15dB Phase Noise: <-98dBc/Hz @20kHz offset
ISDB-T/Tb Modulator Modulation Mode: ISDB-T Layered OFDM Standard: ARIB STD-B31 TMCC Encoding: Fully supported SNR(MER): >40dB
TS over IP Output Ethernet 10/100Base-T Connector: RJ-45
UDP/IP, RTP/UDP/IP Unicast, Multicast
Model Numbers Model No.
Encoder Channel
Modulator
HEN-2100
1 HD(MPEG2, H.264)
None
HAT-2110/2140
1 HD(MPEG2, H.264)
1/4 ch. ATSC
HOC-2110/2140
1 HD(MPEG2, H.264)
1/4 ch. OpenCable
HDT-2110
1 HD(MPEG2, H.264)
1 ch. DVB-T
HDC-2110/2140
1 HD(MPEG2, H.264)
1/4 ch. DVB-C
HDM-2110
1 HD(MPEG2, H.264)
1 ch. DTMB
HIT-2110
1 HD(MPEG2, H.264)
1 ch. ISDB-T
LUMANTEK Catalogue No.22 /2011-
04 Broadcasting Equipment
MINI CONVERTERS in HD&SDI (HD/SD/3G-SDI to HDMI Video and Audio Converter)
(HD/SD/HDMI Video and Audio Converter)
Features
Features
Auto Detection SDI Mode-3G/HD/SD Re-clocked Loop-through 3G/HD/SD-SDI Output [BNC 75 ohm] HDMI v l.3 Compliant Link Indicator LED(Green) - LED ON if SDI LOCK detected - SD(1 blink), HD(2 blink), 3G(3 blink) - LED BLlNK per one second if SDI is locked and HDMI not connected Video or Audio Error Indicator LED (Red) - LED ON if data error or SDI cable not connected Supports 8 audio channels (4 stereo pairs) - 48kHz sample rate Addhional Analog 5tereo Audio Output (Left RCA : White, Right RCA : Red) Selectable Luminance Range(0~255/16~235) by DIP Switch Selectable HD/SD Color Space Conversion by DIP Switch Power Cable Supplied 3 years warranty
Auto Detection Video Mode : 3G/HD/SD Audio Sampling Rate Conversion - 32kHz/44.1 kHz / 48kHz / 88kHz / 96kHz / 176kHz /192kHz < - 48kHz 3G/HD/SD-SDI Output x2 [BNC 750hm] HDMI v1.3 Compliant HDMI Link Indicator LED (Green) - LED ON if HDMI Link detected : SD(1 blink), HD(2 blink) Not supported Video Mode Indicator LED (Red) - LED ON if the input video mode is not supported Selectable Analog Stereo Audio Input (Left RCA :White, Right RCA: Red) or HDMI by DIP Switch Selectable Luminance Range(0-255/16~235) by DIP Switch Input Power Range : +7V ~ +15V Power Consumption : 3Watt [Max] Power Adapter - Input : 100V - 240V, 50/60Hz / - Output: +12V DC, 2.0A Power Cable Supplied 3 years warranty
Spec Supported Video Formats - 720(1440) x 480i @ 59.94/60, 720(1440) x 576i @ 50 - 1280 x 720p @ 50, 1280 x 720p @ 59.94/60 - 1920 x 1080i @ 50, 1920 x 1080i @ 59.94/60 - 1920 x 1080p @ 23.94/24, 1920 x 1080p @ 25, 1920 x 1080p @ 29.97/30 - 1920 x 1080p @ 50, 1920 x 1080p @ 59.94/60 Video Input - 3G, HD, and SD-SDI(auto-selected), SMPTE-259/272/274/292/296/299/424/425 - 1 x BNC input, 1x BNC Loop-through Output Video outPut - HDMI v1.3a, 24/30/36 bits per pixel, RGB, 2.25Gbs, SD, HD - HDMI Standard Type A connector Audio Outputs - HDMI embedded audio, 24 bit, 2 or 8 channels RCA-style analog outputs at -10dBV Input Power Range: +7V ~ +15V Power Consumption : 3Watt [Max] Power Adapter - Input : 100V ~ 240V, 50/60Hz, - Output : +12V DC, 2.0A
Spec Supported Video Formats - 720(1440) x 480i @ 59.94/60, 720(1440) x 576i @ 50 - 1280x720p@50,
[email protected]/60 -
[email protected]/24, 1920x1080p@25,
[email protected]/30 - 1920x1080p@50,1920x1080p @ 59.94/60 Input - HDMI with embedded audio & Auto mute when DVI input Outputs - SMPTE-259/272/274/292/296/299/424/425 3G/HD/ SD-SDI, 2 x BNC Supports 8 audio channels (4 stereo pairs) : when the input audio sample rate is 48kHz Supports Audio Sample Rate Converter Mode : when the input audio sample rate is not 48kHz - Supports 2 audlochannels (1 stereo pair) - Auto detection of the input audio sample rate - Auto switching audio sample rate converter mode - Supports arbitrary input audio sample rate (32kHz -192kHz) - Output audio sample rate is 48kHz
MINI CONVERTERS in HD&SDI Features Auto Detection SDI Mode : HD/SD Re-clocked Loop-through HD/SD-SDI Output [BNC 75 ohm] Component(YPbPr) or Composite(CVBS and S-Video) Output [RCA] Link Indicator LED (Green) - LED ON if SDI LOCK detected - SD(1 blink), HD(2 blink) - LED BLINK per one second if SDI is locked and Y/CVBS is not connected Video or Audio Error Indicator LED (Red) - LED ON if data error SDI cable not connected Supports 2 audio channels (1 stereo pairs) - 48kHz sample rate - Left RCA : White, Right RCA : Red Selectable Component(YPbPr) or Composite(CVBS and S-Video) by DIP Switch Power Cable Supplied 3 years warranty
(HD/SD Analog Composite or Component Video and 2 Ch Analog Audio to SD/HD-SDI w/Embedded Audio Converter)
Features Auto Detection Video Mode - HD/SD Component(YPbPr) or Composite(CVBS) Input HD/SD-SDI Output x 2 [BNC 75 ohm] Video Input Indicator LED(Green) - LED ON if Component or Composite detected : SD(1 blink), HD(2 blink) Not supported Video Mode Indicator LED (Red) - LED ON if the input video mode is not supported Support Analog Stereo Audio Input (Left RCA :White, Right RCA: Red) Input Power Range : +7V ~ +15V Power Consumption : 3Watt [Max] Power Adapter - Input : 100V - 240V, SD/60Hz / - Output : +12V DC, 2.0A Power Cable Supplied 3 years warranty
Spec Supported Video Formats - 720(1440) x 480i @ 59.94/60, 720(1440) x 576i @ 50 - 1280x720p @ 50, 1280x720p @ 59.94/60 - 1920 x 1080i @ 50, 1920 x 1080i @ 59.94/60 - 1920x1080p @ 23.94/24, 1920x1080p @ 25, 1920 x 1080p @ 29.97/30 Video Input - HD, and SD-SDI (auto-selected), SMPTE-259/272/274/292/296/299, - 1x BNC input, 1x BNC Loop-through output Video output - Selectable Component(YPbPr) or Composite(CVBS and S-Video) by DIP Switch - NTSC, PAL support - 3x BNC output Audio Outputs : 2 channels BNC - style analog outputs at -10dBV Input Power Range : +7V ~ +15V Power Consumption : 3Watt [Max] Power Adapter - Input : 100V ~ 240V, 50/60Hz - Output : +12V DC, 2.0A
www.Lumantek.com #1208, Woolim Lions's Valley II, 680 Gasan-Dong, Geumcheon-Gu, Seoul Korea ( 153-830 ) ☎ ( Rep ) : 02-2027-2400 ext. 2410
Printed in KOREA Lumantek Co., Ltd. CopyRight ©2011
Spec Supported Video Formats - 720(1440) x 480i @ 59.94/60, 720(1440) x 576i @ 50 - 1280 x 720p @ 50, 1280 x 720p @ 59.94/60 - 1920 x 1080i @ 50, 1920 x 1080i @ 59.94/60 - 1920 x 1080p @ 23.94/24, 1920 x 1080p @ 25, 1920 x 1080p @ 29.97/30 Video Input : HD Component YPbPr or SD Component / Composite, 3xBNC Audio Input : 2 Channels Unbalanced, 2x BNC Outputs : SMPTE-259/272/274/292/296/299 HD/SD-SDI w/embedded Audio Outputs, 1 x BNC Video ADC : 12 bits Audio ADC : 24 Bits, 48kHz
LUMANTEK PRODUCT CATALOGUE. 2011
(HD/SD-SDI to Analog Video and Audio Converter)
