Transcript
lumenfacade™
Specification Sheet
STAND ALONE - PROJECTOR DYNAMIC WHITE
Client
Project name
Order# Type
Qty
FEATURES AND BENEFITS
Physical :
• Low copper content extruded aluminum housing • Available in 1’, 2’, 3‘ or 4’ sections • Electro-statically applied polyester powder coat finish • Machined aluminum end caps and silicone gaskets • Stainless steel hardware • Standard straight leader cable output, bottom feed • Clear tempered glass • Asymmetric wallwash, 10° x 10°, 10° x 60°, 30° x 60° or 60° x 60° optics • IP66 • IK07 rated (asymmetric wallwash lens is IK06 rated) • Meets 3G ANSI C136.31 Vibration standard for bridge applications • Corrosion-resistant coating for hostile environments**
CERTIFICADO No.05884, 05885 RETILAP
Performance : • • • • • • •
IK07*
DMX/RDM
Minimum 1fc (10.7 lux) @ 108 feet (33m) distance (DWH full output, 4’ unit, 10° x 60° optic) 3-channel control Dynamic Warm variable color temperature: 12 LEDs/ft (4x 2200K, 4x 2700K, 4x 3000K) 4ft, Delivered Intensity Power CCT* Dynamic White variable color temperature: 12 LEDs/ft (4x 2700K, 4x 4000K, 4x 6500K) [K] 10°x60° Output [lm] [peak cd] [W] Lumen maintenance L70 @ 25°C - 120,000 hrs 69 2,144 9,260 2,600 DWW Resolution per foot or per fixture (configured with LumenID V3 software & DMX/RDM) 69 2,599 11,696 4,000 DWH Lumen measurements comply with LM - 79 - 08 standard Operating temperatures: -25° C to 50° C [-13F to 122F] Dim to Warm via DMX/RDM
Electrical :
Single channel control (DMX/RDM1)
DWW
• Line voltage luminaire for 100 to 277V • Power and data in 1 cable (#16-5) • Up to 64 feet with 1 power & data feed • Standard 10ft /3m cord • 17.25W/ft • Dimming options: dim to warm via 0-10V (DWW only), DMX/RDM enabled dim to warm via single channel (DWW only) or DMX/RDM enabled 3-channel color temperature control
2,039
7,871
55
2,700
7,863
55
2,700
Dim to Warm via 0-10V
(DIM/DTW)
DWW
2,037
*Tested at full output.
TOP VIEW
3" 3" 3" 3 , 25 , 37 , 49 " 8 8 8 8 [340mm,645mm,949mm,1254mm] 13
5 2 16 " [58mm]
4"* [102mm]
1 2 " [89mm] 3
FRONT VIEW
*6
11 " [169mm] on 1ft configuration 16
SIDE VIEW
*Asymmetric wallwash lens is IK06 rated. ** Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 1/9
© Copyright Lumenpulse 2016
08/JN/2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
N.Kassabian - Rev.14
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
STAND ALONE - PROJECTOR DYNAMIC WHITE
ASYMMETRIC WALLWASH OPTIC INSTALLATION DETAIL
Wall side
INPUT
WW Asymmetric Wallwash Optic
Always position frosted side toward the wall
Recommended setback from wall is 1/10 of the wall height. Example: 2ft setback for a 20ft wall.
TOP VIEW
FRONT VIEW RIGHT SIDE VIEW (Fixture pointing upwards)
2/9
© Copyright Lumenpulse 2016
08/JN/2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
N.Kassabian - Rev.14
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
STAND ALONE - PROJECTOR DYNAMIC WHITE
MOUNTING OPTIONS Surface Mount 3" 8 [10mm]
UMP Fixed Mounting
3/4” [19mm]
3/8” [10mm]
ALLOW A MIN. OF 2" CLEARANCE FOR STRAIN RELIEF AND CABLE BEND RADIUS
3/16” [5mm]
3 1/2” [89mm] 2 7/8” [73mm]
Wall Mount
2X 9/32” THRU ALL
0°
UMAS Universal Adjustable Mounting
UMP Mounting Hole Pattern
90°
3/4” [19mm]
180°
60°
WAM2 Adjustable Wall Mounting 2"
3/8” [10mm]
3/8” [10mm]
2 1/2” [64mm]
0°
1 3/4” [45mm] -60°
2X 9/32” THRU ALL
115°
UMAS Mounting Hole Pattern
WAM6 Adjustable Extended Arm Mounting 6"
0°
3/8” [10mm]
1 1/16” [27mm]
-115°
115°
2 1/2” [64mm]
WAM12 Adjustable Extended Arm Mounting 12"
0°
2X 1/4” THRU ALL
1 3/4” [45mm]
-115°
WAM Mounting Hole Pattern
115°
WAM18 Adjustable Extended Arm Mounting 18"
0°
-115°
0 13" 41" 73" 8 4 8 [35mm][108mm] [187mm]
3/9
© Copyright Lumenpulse 2016
08/JN/2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
N.Kassabian - Rev.14
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
13 3 " 8 [340mm]
19 3 " 8 [492mm]
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
STAND ALONE - PROJECTOR DYNAMIC WHITE
LOUVER ACCESSORY INSTALLATION DETAIL Not suitable for asymmetric wallwash optic 7 7 7 7 ", 25 ", 37 ", 49 " 16 16 16 16 [341mm, 646mm, 951mm,1256mm]
13 Blade spacing 1" [25mm]
2 3" 8 [60mm] Blade depth 7 " 16 [11mm]
TOP VIEW 15 " 16 [24mm]
3 28 "
[60mm] 4" [102mm]
FRONT VIEW
LOGRD Radial Louver for Lumenfacade (See page 5 for ordering code)
SIDE VIEW
OPTION
A - 90o angle cord output bottom feed
4/9
© Copyright Lumenpulse 2016
08/JN/2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
N.Kassabian - Rev.14
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
STAND ALONE - PROJECTOR DYNAMIC WHITE
ACCESSORIES Order separately
Control Systems: LTO2 Lumentouch is a wall mount DMX 512 controller keypad. LCU Lumencue is a USB / mini SD DMX 512 controller. LID LumenID is a diagnostic and addressing DMX 512 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. LTN Lumentone is a simple pre-programmed DMX 512 controller with a push button rotary dial and live feedback.
Control Boxes: CBX DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX specifi cation sheet for details.
Radial Louver :
Not suitable for asymmetric wallwash optic LOGRD___-___ Radial louver for Lumenfacade. Louver blade depth: 7/16” [11mm]; louver blade spacing: 1” [25mm] 1. Please specify desired nominal length: 1’, 2’, 3’ or 4’. 2. Please specify finish as BK - Black Sandtex, SI - Silver Sandtex or WH - Smooth white (Custom color available on request, please specify as CC together with RAL color : _________)
5/9
© Copyright Lumenpulse 2016
08/JN/2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
N.Kassabian - Rev.14
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
STAND ALONE - PROJECTOR DYNAMIC WHITE
RESOLUTION DETAILS Fixture resolution can be configured on-site within the LumenID V3 software. A DMX/RDM enabled CBX is required.
Resolution per foot: each foot is addressed independently DMX ADDRESSES:
1,2,3 (color 1)
4,5,6 (color 2)
7,8,9 (color 3)
10,11,12 (color 4)
TOP VIEW LOGP 48 inches
Resolution per fixture: each fixture is addressed independently DMX ADDRESSES:
1,2,3 (color 1)
TOP VIEW LOGP 48 inches
6/9
© Copyright Lumenpulse 2016
08/JN/2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
N.Kassabian - Rev.14
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
STAND ALONE - PROJECTOR DYNAMIC WHITE
TYPICAL WIRING DIAGRAMS
Dimming Version (DIM/DTW* - Dim to Warm via 0-10V) *Available for DWW version only, 2700K to 2200K
100-277V
American Color Code
CE Color Code
USE
Green Black White Red/Purple Orange
Yellow/Green Brown Blue Black Grey
Ground Live 100-277V Neutral 0-10V / Data + 0-10V / Data -
JBOX
0-10V
*Power cables by others.
To fixture
Dimmer
Neutral Ground Line To next fixture
100-277V Data + Data Maximum run length by 15A circuit: 64 linear feet of fixture - 320’ feet maximum cable length. Notes: 1 2
Maximum run length calculations are typically based on 4ft fixtures. Consult factory for specific applications.
7/9
© Copyright Lumenpulse 2016
08/JN/2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
N.Kassabian - Rev.14
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
From dimmer Junction box (by others)
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
STAND ALONE - PROJECTOR DYNAMIC WHITE
TYPICAL WIRING DIAGRAMS - continued
Star Layout (DMX/RDM1*, DMX/RDM) *Available for DWW version only, 2700K to 2200K
#16-5 Power & data cable, 10’ standard
American Color Code
CE Color Code
USE
Green Black White Red/Purple Orange
Yellow/Green Brown Blue Black Grey
Ground Live 100-277V Neutral 0-10V / Data + 0-10V / Data -
*Power cables by others.
CBX - ST 100-277V
Lumentouch 2.0 Data input
100-240V
Data- orange Data+ red From fixture or CBX
To fixture
Line black Ground green Neutral white
Maximum run length by 15A circuit: 64 linear feet of fixture - 320’ feet maximum cable length.
Junction box (by others)
Notes:
Maximum run length calculations are typically based on 4ft fixtures and up to 32 DMX/RDM enabled fixtures per DMX/RDM run. Consult factory for specific applications. 3 DMX/RDM1 control option requires 1 DMX address. DMX/RDM control option requires 3 DMX addresses. 1
2
Daisy Chain Layout (DMX/RDM1*, DMX/RDM) *Available for DWW version only, 2700K to 2200K
*Power cables by others. #16-5 Power & data cable, 10’ standard
CBX - DS 100-277V
Lumentouch 2.0 Data input
100-240V
8/9
© Copyright Lumenpulse 2016
08/JN/2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
N.Kassabian - Rev.14
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
STAND ALONE - PROJECTOR DYNAMIC WHITE
HOW TO ORDER
LOGP
Select:
1
2
Select:
Select:
3
Select:
4
1
Select:
Select:
6
7
5
Select
Select
8
9
6
Housing:
Mounting Option:
LOGP - Lumenfacade Stand Alone Projector
UMP - Fixed Mounting2
™
UMAS - Universal Adjustable Mounting2
2
WAM2 - Adjustable Wall Mounting 2” WAM6 - Adjustable Extended Arm Mounting 6”
Voltage:
WAM12 - Adjustable Extended Arm Mounting 12”
100 - 100 volts
220 - 220 volts
120 - 120 volts
240 - 240 volts
208 - 208 volts
277 - 277 volts
WAM18 - Adjustable Extended Arm Mounting 18”
7
Finish:
3
BK - Black Sandtex
Length:
SI - Silver Sandtex
12 - 13 3/8 inches (340mm) (2 kg/4.50 lbs)
WH - Smooth white
24 - 25 3/8 inches (645mm) (3.17 kg/7 lbs)
CC - Custom color and finish (please specify RAL color)3
36 - 37 3/8 inches (949mm) (4.75 kg/10.50 lbs) 48 - 49 3/8 inches (1254mm) (6.35 kg/14 lbs)
8
Control:
4
DIM/DTW - Dim to Warm via 0-10V, 2700K to 2200K4, 5
Colors and Color temperatures:
DMX/RDM1 - Dim to Warm via single-channel DMX/RDM4, 6
DWW - Dynamic warm white color temperature
2700K to 2200K
ranging from 2200K to 3000K.
DMX/RDM - 3-channel color temperature control via
DWH - Dynamic white color temperature
DMX/RDM7
ranging from 2700K to 6500K.
9
5
Option:
Optics:
A - 90° angle cord output, bottom feed
WW - Asymmetric Wallwash optic
CRC - Corrosion-resistant coating for hostile environments
10x10 - 10° x 10°1
3GV - 3G ANSI C136.31 Vibration Rating8
10x60 - 10° x 60°
CE - CE (certification covers European Economic Area)
30x60 - 30° x 60° 60x60 - 60° x 60°
Notes: 1
For best results, we recommend a 6-inch (15cm) setback from surface. Contact factory for application support. 2 Suitable to use when 3GV option is specified. 3 North American RAL
colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
4
For more information about Lumenpulse’s Dim to Warm technology consult the application note and the brochure on the Lumenpulse website.
5
10% minimum dimming value.
Available for DWW version only. 6 1% minimum dimming value. Available for DWW version only. 1 DMX address per fixture. 7 Fixtures set to by fixture resolution. 3 DMX addresses per fixture. 8
Available with UMP and UMAS mounting options only.
9/9
© Copyright Lumenpulse 2016
08/JN/2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
N.Kassabian - Rev.14
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
