Transcript
lumenfacade™
Specification Sheet
REMOTE POWER SUPPLY WHITE & STATIC COLORS
Client
Project name
Order# Type
Qty
FEATURES AND BENEFITS
Physical :
• Low copper content extruded aluminum housing • Electro-statically applied polyester powder coat finish • Machined aluminum end caps and silicone gaskets • Stainless steel hardware • Clear tempered glass • Asymmetric wallwash, 10° x 10°,10° x 60°, 30° x 60° or 60° x 60° optics • IP66 • IK07 rated (asymmetric wallwash lens is IK06 rated) • Corrosion-resistant coating for hostile environments** • Meets 3G ANSI C136.31 Vibration standard for bridge applications
IK07* *Strain relief connectors and cables by others.
Performance : • • • • •
Delivered Intensity 4ft HO 4000K Output [lm] [peak cd]
CRI values: 85+ (2700K), 80+ (3000K), 78+ (4000K) Lumen maintenance 120,000 hrs [L70 @ 25°C] Lumen measurements comply with LM - 79 - 08 standard Resolution per foot or per fixture (see page 6) Operating temperatures: -25° C to 50° C [-13F to 122F]
Electrical : • • • • •
24V DC luminaire, remote power & data supply for 100 to 277V (required but not included, see page 4 for details) Power and data in 1 cable (#16-4) 5W/ft version meets ASHRAE standards for linear lighting on building facades 8.5W/ft (15.25W/ft HO version) Dimming options: 0-10 volt, DMX or DALI
15 4 16 " [125mm]
10ºx10º
-
-
10ºx60º
3,692
19,654
30ºx60º*
3,584
4,750
60ºx60º*
3,676
3,137
WW
3,592
5,159
Estimated.Consult lumenpulse website for the latest ies files.
3 3 3 3 13 8 " , 25 8 " , 37 8 " , 49 8 " [340mm, 645mm, 949mm,1254mm]
2 7 16 " [62mm]
41" 2 [114mm] Minimum space required
TOP VIEW
FRONT VIEW
5 1 " 16 [33mm]
Minimum spacing 1 " 4 [7mm]
SIDE VIEW
*Asymmetric wallwash lens is IK06 rated. ** Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 1/9
© Copyright Lumenpulse 2015
2015.05.01
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
EM - R44
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
REMOTE POWER SUPPLY WHITE & STATIC COLORS
ASYMMETRIC WALLWASH OPTIC INSTALLATION DETAIL
Wall side
INPUT
WW Asymmetric Wallwash Optic
Always position frosted side toward the wall
Recommended setback from wall is 1/10 of the wall height. Example: 2ft setback for a 20ft wall.
TOP VIEW
FRONT VIEW
RIGHT SIDE VIEW (Fixture pointing upwards)
2/9
© Copyright Lumenpulse 2015
2015.05.01
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
EM - R44
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
REMOTE POWER SUPPLY WHITE & STATIC COLORS
MOUNTING OPTIONS 1 " 4 [108mm] 4
ADJUSTABLE
4
1/4”
[108mm]
3 3 " 8 [34mm] 1
FRONT VIEW
1/2”
[89mm]
TOP VIEW
1 " 2 [37mm] 1
UMPR Fixed Mounting Remote Version
UMPR Mounting Hole Pattern
RIGHT VIEW
ADJUSTABLE
11 2 16 " [68mm]
1 2" [12mm]
1 2 2 " [64mm]
TOP VIEW
1 4" [7mm]
1 3/4” 2 1/2” [44mm] [64mm]
45°
0° FRONT VIEW
-45°
WAMR3 Adjustable Arm Mounting Remote version
RIGHT VIEW
WAMR Mounting Hole Pattern
ADJUSTABLE
4 11 ", 11 11 ", 16 11 " 16 16 16 [120mm, 297mm, 424mm]
2 1" 2 [64mm]
TOP VIEW
45°
0° FRONT VIEW
WAMR6, WAMR12 & WAMR18 Adjustable Arm Mounting Remote version
3/9
© Copyright Lumenpulse 2015
2015.05.01
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
EM - R44
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
-45° RIGHT VIEW
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
REMOTE POWER SUPPLY WHITE & STATIC COLORS
LOUVER ACCESSORY INSTALLATION DETAIL Not suitable for asymmetric wallwash optic 7 7 7 7 13 16 " , 25 16 " , 37 16 " , 49 16 " [341mm, 646mm, 951mm,1256mm]
2 13 16 " [71mm]
3 " 4 [19mm]
1 " 2 [114mm] Minimum space required 4
LOGRRD Radial Louver for Lumenfacade Remote (2 mounting screws included) (see page 5 for ordering code)
4/9
© Copyright Lumenpulse 2015
2015.05.01
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
EM - R44
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
REMOTE POWER SUPPLY WHITE & STATIC COLORS
ACCESSORIES Order separately
Control Systems: LTO2 Lumentouch is a wall mount DMX 512 controller keypad. LCU Lumencue is a USB / mini SD DMX 512 controller. LID LumenID is a diagnostic and addressing DMX 512 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. LTN Lumentone is a simple pre-programmed DMX 512 controller with a push button rotary dial and live feedback.
Power Supply and Dimming Boxes: PSX60, PSX100 Power supply box. Up to six low voltage power outputs to fi xtures or fi xture runs. Refer to PSX60, PSX100 specifi cation sheet for details.
Control and Power Supply Boxes: CBX60, CBX100 DMX/RDM control box. Up to six low voltage power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX60, CBX100 specifi cation sheet for details.
Radial Louver :
Not suitable for asymmetric wallwash optic LOGRRD___-___ Radial louver for Lumenfacade Remote. 1. Please specify desired nominal length: 1’, 2’, 3’ or 4’. 2. Please specify finish as BK - Black SandText (Custom color available on request, please specify as CC together with RAL color : _________)
5/9
© Copyright Lumenpulse 2015
2015.05.01
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
EM - R44
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
REMOTE POWER SUPPLY WHITE & STATIC COLORS
RESOLUTION DETAILS APPLICABLE FOR DMX DIMMING OPTION ONLY
DMX 1FT - Resolution per foot: each foot is addressed independently (recommended for most installations). DMX ADDRESSES: 1,2,3 4,5,6 7,8,9 10,11,12
LOGR 48 inches 13,14,15 16,17,18 19,20,21
LOGR 48 inches
22,23,24
DMX1FX - Resolution per fixture: each fixture is addressed independently DMX ADDRESSES:
1,2,3
LOGR 48 inches
4,5,6
LOGR 48 inches
*Warning: resolution is a factory setting and cannot be changed in the field. 6/9
© Copyright Lumenpulse 2015
2015.05.01
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
EM - R44
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
REMOTE POWER SUPPLY WHITE & STATIC COLORS
TYPICAL WIRING DIAGRAMS
4ft Fixture Non-Dimming Version Maximum run length for non-dimming applications: 64 linear feet of fixture - 320’ feet maximum cable length. (Consult factory for custom applications).
American Color Code
CE Color Code
USE
Red Green Black White
Black Grey Brown Blue
0-10V / Data + 0-10V / Data Live 100-277V Neutral
LOGR 4’ (24V DC)
Power cable #14-2, 25’ max.
100-277V
PSX60
#14-3 Power cable (by others)
PSX60
1ft Fixture Non-Dimming Version Maximum run length for non-dimming applications: 64 linear feet of fixture - 320’ feet maximum cable length. (Consult factory for custom applications). LOGR 1’ (24V DC)
Power cable #14-2, 25’ max.
100-277V
PSX100
#14-3 Power cable (by others) PSX100
7/9
© Copyright Lumenpulse 2015
2015.05.01
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
EM - R44
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
REMOTE POWER SUPPLY WHITE & STATIC COLORS
TYPICAL WIRING DIAGRAM - continued
4ft Fixture Dimming Version (0-10V) 10% minimum dimming value
American Color Code
CE Color Code
USE
Maximum run length for dimming applications: 48 linear feet of fixture - 400’ feet maximum cable length. (Consult factory for custom applications).
Red Green Black White
Black Grey Brown Blue
0-10V / Data + 0-10V / Data Live 100-277V Neutral
LOGR 4’ (24V DC)
Power & data cable #16-4, 25’ max. Dimmer 0-10V PSX60-010
100-277V
#16-5 Power & data cable (by others)
PSX60-010
1ft Fixture Dimming Version (0-10V) 10% minimum dimming value
Maximum run length for dimming applications: 48 linear feet of fixture - 400’ feet maximum cable length. (Consult factory for custom applications). LOGR 1’ (24V DC)
Power cable #16-4, 25’ max.
Dimmer 0-10V 100-277V
PSX100-010
PSX100-010
#16-5 Power cable (by others)
DMX Dimming Version 1% minimum dimming value
Maximum run length: 64 linear feet of fixture - 320’ feet maximum cable length. (Consult factory for custom applications).
(24V DC)
(24V DC)
Lumentouch 2.0 Power & data cable #16-4, 25’ MAX.
100-240V 100-277V
CBX60
8/9
© Copyright Lumenpulse 2015
2015.05.01
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
EM - R44
#16-5 Power & data cable (by others)
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
CBX60
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
lumenfacade™
Specification Sheet
REMOTE POWER SUPPLY WHITE & STATIC COLORS
HOW TO ORDER LOGR Select:
Select:
1
2
24V
Select:
Select:
Select:
Select:
3
4
5
6
7
1
Select: 8
Select:
Select:
9
10
6
Housing:
Optics: WW - Asymmetric Wallwash optic* 10x10 - 10° x 10°** 10x60 - 10° x 60° 30x60 - 30° x 60° 60x60 - 60° x 60° *Available September 2015. **For best results use with HO fixtures at a 6-inch (15cm) setback from surface. Contact factory for application support.
LOGR ASHRAE - Lumenfacade Remote Power Supply, 5W/ft ASHRAE compliant LOGR RO - Lumenfacade™ Remote Power Supply, Regular Output 8.5W/ft LOGR HO - Lumenfacade™ Remote Power Supply, High Output 15.25W/ft ™
2
Cable Length: 10 - 10’ (3m) 20 - 20’ (6m) 30 - 30’ (9.1m) 50 - 50’ (15.2m) 70 - 70’ (21.3m) 100 - 100’ (30.5m)
Up to 30ft with no additional charges. 1ft fixture - 100’ cable length max 2ft fixture - 70’ cable length max 3ft fixture - 30’ cable length max 4ft fixture - 20’ cable length max
7
Mounting Option: UMPR - Fixed Mounting remote version WAMR3 - Adjustable arm mounting 3” remote version (Suitable to use when 3GV option is specified) WAMR6 - Adjustable arm mounting 6” remote version WAMR12 - Adjustable arm mounting 12” remote version WAMR18 - Adjustable arm mounting 18” remote version
3
Voltage: 24V DC fixture. Refer to accessory page for control & power box options.
8
Finish: SI - Silver SandText BK - Black SandText WH - White CC - Custom (please specify RAL color)
4
Length: 12 - 13 3/8 inches (340mm) (0.95 kg/2.10 lbs) 24 - 25 3/8 inches (645mm) (1.78 kg/3.90 lbs) 36 - 37 3/8 inches (949mm) (2.55 kg/5.60 lbs) 48 - 49 3/8 inches (1254mm) (3.40 kg/7.40 lbs)
9
Control: DIM - 0-10V Dimming option (10% minimum dimming value) DMX 1FT - DMX Dimming option, resolution per foot (1% minimum dimming value) DMX 1FX - DMX Dimming option, resolution per fixture (1% minimum dimming value) DALI - DALI Dimming option (1% minimum dimming value) NO - No Dimming
5
Colors and Color temperatures: 27K - 2700K 30K - 3000K 35K - 3500K 40K - 4000K RD - Red GR - Green BL - Blue
10
Option: CRC - Corrosion-resistant coating for hostile environments
3GV - 3G ANSI C136.31 Vibration Rating N.B. Available with WAMR3 mounting options only
9/9
© Copyright Lumenpulse 2015
2015.05.01
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
EM - R44
1.877.937.3003 P.514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
5-year limited warranty. Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
