Preview only show first 10 pages with watermark. For full document please download

Lumina Pro V2.12 Installation Manual

   EMBED

Share

Transcript

HOME AUTOMATION, INC. Lumina and Lumina Pro Lighting and Automation System Quick-Start Installation Guide Document Number 44I00-1 Rev. 2.12 February, 2006 For complete operation and programming instructions, please download the following document(s) from the HAI web site: 44R00-1: Lumina Advanced Application Guide 44R00-2: Lumina Pro Advanced Application Guide www.homeauto.com Copyright © 2006 Home Automation, Inc. All Rights Reserved 6 CONDUCTOR CABLE (SUPPLIED) TO PREVENT RISK FROM ELECTRIC SHOCK, DE-ENERGIZE THIS UNIT AND DISCONNECT TELEPHONE LINES BEFORE SERVICING. WARNING NOTES: 1. SWITCHED 12V, AUXILIARY 12V, CONSOLE, AND OUTPUTS 1-8 ARE INCLUDED IN THE TOTAL DEVICE LOAD, WHICH CANNOT EXCEED 1 AMP. GREEN YELLOW SWITCHED 12 VDC 1A Max. (See NOTE 1) RED EARTH GROUND BLACK 2. OUTPUTS LABELED "INT" AND "EXT" CANNOT EXCEED 1 AMP, SPLIT BETWEEN THE TWO OUTPUTS. OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT 100 mA Max. (See NOTE 1) 1 Amp Max. (See NOTE 2) AUXILIARY 12 VDC 1A Max. (See NOTE 1) 11A02-2 6' KEYPAD CABLE (Supplied) CONNECT CABLE TO CONTROLLER, PLUG MODULAR END INTO RJ31X JACK ALL CIRCUITS EXCEPT FOR THE BATTERY ARE POWER-LIMITED (CLASS II) GREEN 44A07-1 TRANSFORMER CABLE (Supplied) BLACK / RED CONTROL S ECURITY BUTTONS ALL TEMP STATUS EVENTS MESSAGE SETUP KEYPAD(S) POL FI RE L A UX ME NU YELLOW CANCEL ZONE INPUT ZONE INPUT ZONE INPUT ZONE INPUT ZONE INPUT ZONE INPUT ZONE INPUT ZONE INPUT ZONES 1-16 ARE CONFIGURABLE FOR AUXILIARY OR TEMPERATURE. ZONE INPUT ZONE INPUT ZONE INPUT ZONE INPUT ZONE INPUT ZONE INPUT ONLY ZONES 9-16 MAY BE CONFIGURED AS ENERGY SAVER ZONES. ONLY ZONE 16 MAY BE USED FOR HAI REMOTE CONTROL THERMOSTATS. BLACK WIRE TO RED WIRE TO + POWER CELL PC5-12 OR EQUIVALENT ZONE INPUT HAI REMOTE CONTROL THERMOSTAT(S) POWER TRANSFORMER Status REVERE MODEL RT-R2440SL/M OR EQUIVALENT