Preview only show first 10 pages with watermark. For full document please download

Luxcontrol Lighting Control Systems Dsi Actuator Dsi

   EMBED

Share

Transcript

luxCONTROL lighting control systems DSI actuator DSI-A/D Converter for 1...10 V into DSI signal 1-channel for installation in luminaire Product description _ Converter for converting analogue signals into DSI signals _ For connecting DSI devices in 1...10 V control systems _ For a maximum of 50 DSI devices _ Constant lighting control possible via terminal for SMART LS II _ On/off switching via separate switch input _ 5-year guarantee Website http://www.tridonic.com/28000850 Article information 09/15 Subject to change without notice. www.tridonic.com 1 2 luxCONTROL lighting control systems DSI actuator DSI-A/D Converter for 1...10 V into DSI signal 1-channel for installation in luminaire The complete data sheet for this product is available in the Downloads section. 28 30 30 190 180 Ordering data Type DSI-A/D Article number 28000850 Packaging, carton 10 pc(s). Technical data Rated supply voltage Mains frequency Power Ambient temperature ta Type of protection 230 – 240 V 50 / 60 Hz 4W 0 ... +60 °C IP20 Approval marks Specific technical data Digital control line DSI Control output per physical output (devices) Maximum DSI cable length at 1.5 mm² 1 Dimming, potentiomet er (optional) 47 (≥47 ≤100) kΩ Ambient light sensor 1 ... 10 V Outputs ON/OFF switch (220– 240 V) DSI-A/D Dimming Type Inputs 1 1 1 50 100 m 1 Potentiometer with linear characteristics, optimum: 47 kOhm, possible range: 47 – 100 kOhm; power ≥0,5 W. Article information 09/15 Subject to change without notice. www.tridonic.com 2 2