Transcript
aero series
2
LX-212
High-performance subwoofer system
» 6th order subwoofer
band-pass
» 2 x 12" long-excursion loudspeakers » 1600 W power handling » “R” version with captive rigging system » Ultra-compact design
The D.A.S. LX-212 is a 6th order band-pass subwoofer system designed for impressive low frequency performance. The LX-212R version is intended as flyable subwoofer for the Aero line array systems.
power levels, for an impressive combination of punch, trasient response and low-frequency extension. The top panel contains a threaded pole mount socket for use with 35 mm metal posts for mounting fullrange D.A.S. systems above the LX-212 subwoofer unit.
The unit utilizes two 12LXN long-excursion 12" low frequency speakers with 4" voice coil. Improved voice coil materials, magnet circuit and surround design provide high power handling, low power compression and low distortion. 6th order band-pass design provides high-efficiency and limited excursion and distortion, even at maximum
Technical Specifications
LX-215R Dimensions (H x W x D) Weight Accessories (optional)
Dimensions 870
488
1600 W 3200 W 6400 W 45 Hz - 138 Hz 4 Ω 3.8 Ω (at 47 Hz) 99 dB SPL 136 dB Birch Plywood Black Paint 2 x 12LXN/GM 12LX 2 paralleled NL8 Speakon, wired to ±1 48.8 x 48 x 87 cm (19.2 x 18.9 x 34.3 in) 48.8 x 52.6 x 87 cm (19.2 x 20.7 x 34.3 in) LX-212 48 kg (105.6 lb) LX-212R 63 kg (138.6 lb) AX-LX212 (R) KITR-LX212 Pick-up AX-LX212 (R) Pick-up 8212 (R) PL-212S Flat Bed Dolly TRD-6
480
RMS (Average) Power HandlingR Program Power HandlingP Peak Power HandlingK On-axis Frequency Range (-10 dB) Nominal Impedance Minimum Impedance On-axis Sensitivity 1W / 1 m Rated Peak SPL at Full Power Enclosure Material Finish Transducers/Replacement Parts Connector LX-215 Dimensions (H x W x D)
ALL DIMENSIONS IN MILIMETERS
R Based on the component AES power handling. P Conventionally 3 dB higher than the RMS measure. K Corresponds to the signal crests for the AES test.
LX-212
aero series2 110.0
Frequency Response
dBSPL 100.0
Shows the frequency response (black) of a unit with recommended signal processing (grey).
90.0
80.0
70.0
60.0 10
100
1k
10k
Hz
20k
100
1k
10k
Hz
20k
50.0
Impedance
Ohm
40.0
Shows impedance curve.
30.0
20.0
10.0
0.0 10
Recommended signal processing Butt 24 dB/oct 50.6 Hz LR-48 dB/oct 125 Hz Recommended amplifier power 2 x 1800 W @ 4 ohms (2 units LX-212)
NOTES. 1.Frequency response: referred to 1 m; low end obtained through the use of near field techniques; one-third octave smoothed for correlation with human hearing.
Product improvement through research and development is a continuous process at D.A.S. Audio. All specifications subject to change without notice.
