Transcript
Spec No. 1599
[REV. 08.03.17] Page 1/2
Model No.
LXR-1421-IAV Slim rack with installed accessories
except as noted
• 14U x 21”D x 19.21”W Pre-assembled slim frame rack includes a set of installed accessories commonly used in AV applications. The unit is shipped in a ready-to-use format, saving assembly time at the shop.
Rack Construction & Features • Base is 14 gauge steel with front vents, side obrounds, rear knockouts • Top is 14 gauge steel with top/front vents, side obrounds, rear knockouts •
Corner post mounting rails are 11 gauge steel, tapped 10-32
•
Load capacity 400 lbs.
• Black powder epoxy finish •
Made in the U.S.A.
Installed Accessories • Utility Shelves (3 qty): Rugged two-part 16 gauge steel shelf (2U x 15”D x 19”W) features 0.438” front/rear flanges for added strength. Bottom vents. Side obrounds. Black semi-gloss powder epoxy finish. Load rating 50 lbs. Made in the U.S.A. • SVP-2 Vent Panels (2 qty): 3.5”H (2U) panel is 20 gauge steel with .625” flange for strength and rigidity. Features fine perforation pattern (.0781” holes on 1.25” staggered centers). Smooth semi-gloss black powder epoxy finish. Made in the U.S.A. • ACS-1506 Power Strip (1 qty): 6 (15A) outlets, 6’ attached cord and NEMA 5-15P molded plug, common mode transient voltage surge suppression, LED status indicator, 15A circuit breaker. 20”L x 1.625”W x 1.375”D. UL1449-3 Listed. Imported. • CMV3-12 Vertical Cable Manager (1 qty): 16 gauge steel with slots for lacing. 3.25”W. Smooth black powder epoxy finish. Made in the U.S.A. • LVR-C3SFL Swivel Casters (set of 4, two locking): 3” swivel casters feature a special formula rubber tread that won’t mar fine floors like wood, marble or tile. Polyolefin core helps absorb shocks when transporting. Note: Use caution when loading or moving racks mounted on casters to avoid tip-over.
A&E Specifications The E.I.A. compliant rack shall be Lowell Model No. LXR1421-IAV. The rack with casters shall measure 32.59”H x 21”D x19.21”W and provide 14 rack units of panel space. It shall have a black powder epoxy finish. The base and top shall be 14 gauge steel; corner post mounting rails shall be 11 gauge steel imprinted with rack unit increments. The rack shall include three utility shelves (16 ga. steel), two vent panels (20 ga. steel), a 15A power strip with six outlets and a six ft. attached cord with plug, a 12U vertical cable management bar, and a set of fine-floor swivel casters (two locking). The rack shall ship pre-assembled with accessories installed.
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com
Spec No. 1599
[REV. 08.03.17] Page 2/2
FRONT VIEW 19.21
1.83
3U 24.63 14 U 28.28 1U
1.83
4.00 VENT PANELS IN RU 1 & 2 / 6 & 7
REAR VIEW
SIDE VIEW
SIDE VIEW
BRACKET IN "RU" 11 & 12
SHELVES IN "RU" 3 & 4 / 8 & 9 / 13 & 14
ACS-1506
CMV3-12
BRACKET IN "RU" 3&4
Model No. Summary Model No. Description
LXR-1421-IAV
LXR rack w installed accessories
Rack Units
Rack Height *
Overall Depth
Overall Height
Utility Shelves
19”W Vent Panels
Power Strip
14
28.28”
21”
32.59”
3
2
1
Cable Mgmt Bar Casters
1
4
*Height without casters Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification. ©2017 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. 800.325.9660 | www.lowellmfg.com
