Preview only show first 10 pages with watermark. For full document please download

M Motorized Floorstand 80 Kg White

   EMBED

Share

Transcript

M Motorized Floorstand 80 kg White www.multibrackets.com www.multibrackets.com 1 A (1×) B (1×) C (1×) D (2×) 8 M8×16 F (4×) E (4×) G (4×) SW 6 K (1×) M5×6 J (4×) I (4×) H (8×) 2 A (1×) a M10×25 b M8×20 M6×18 d E (1×) D (1×) C (2×) 8 e 6 (6×) (4×) f (4×) M VESA Extender kit Motorized Mount 1200x800 HD M8×16 H (2×) c (4×) (4×) OPTION B (2×) I (4×) M8 8 J (8×) K (4×) SW 12 Phillips head SW 5 6 8 included www.multibrackets.com M8×16 (2×) 1 A SW 12 G 1. F 2. “CLICK” E 3 2 SW 6 SW 6 ~3mm R C H L ! B H I D 22 4 K J I II 1 J www.multibrackets.com 5 A SW 6 1. Hang the Wall mount on the Mobile stand. 2. Tighten the screws. 6 SW 5/6/8 VESA 900 x 800 VESA a/b/c 50 350-900 d/e 800 UP DOWN B VESA = 1000 / 1200 x 800 a/b/c d/e K J J H I B www.multibrackets.com 3 SW 6 C d f OPERATING E 1. Check mains voltage. The mains voltage should correspond to the one specified on the rating plate located on the left side of the frame. 2. Plug the enclosed mains cable into the power socket (B) on the left side of the wall mount frame. 3. Plug the other end of the mains cable in the grounded outlet. 4. Connect the remote control to the socket (A) on the frame. 5. To raise the wall mount press the button (UP), to lower the wall mount press the button (DOWN) on the remote control. A D B Troubleshooting Lifting function does not work >> Folowing steps should be taken: 1. Check the power cord for any possible damage. 2. Make sure the power cord is properly into the socket (B). 3. Check the fuse in the main socket. If it fails replace the fuse with the same type as the original (1,6 A). 4. Check the connection between the remote control and wall mount socket (A). www.multibrackets.com