M Universal Projector Ceiling Mount 900

Transcript

To Install The Projector On The Projector Ceiling Mount To Adjust The Horizontal Rotation ● Move the projector mounting plate and adjust the leftward/rightward slide. Adjust the leftward/ -rightward slide A B A B A B A B A B Adjustment direction Adjustment buttons Adjustment direction M Universal Projector Ceiling Mount 900-1600 with Fine tune To Adjust The Upward/Downward Slide Locking screws B A A B A Connect the power cable and other cablesto the projector. B To Adjust The Vertical Tilt Adjustment direction To Remove The Projector Ceiling Mount ● Use a stick or something hard to pry open the ceiling plate cover. stick A B A A B C Adjustment buttons Adjustment direction To Adjust The Horizontal Roll Product Information: Model A B B A Adjustment buttons ●Be sure to read this manual thoroughly and to do the installation work safely. M Universal Projector Ceiling Mount 900-1600 with Fine tune Product Weight 2.6kg Max Weight Load 25kg Adjustable Range 900mm-1600mm(from mounting plate bottom to the ceiling) Adjustable Angle ± 5° tilt, left\right, front\rear and lateral rotation adjustment Keep this manual available for future reference. ●Sufficient expertise is required for installing this projector Ceiling mount. ●Do not use the projector Ceiling mount for purposes other than for which it is designed. Adjustment direction www.multibrackets.com 41L1620-EN-MB www.multibrackets.com Important Safety To Set The Projector Ceiling Mount On The Wall Be sure to read this manual thoroughly to do the installation work. 2 ø10~11mm Only qualified service personnel (two or more) should carry out installation or dismounting of the projector from the projector wall mount. 4 Do not make alterations to the projector Ceiling mount. 5 Do not install the projector Ceiling mount on a wall subject to vibration or impact. To avoid fire, do not install the projector with the projector Ceiling mount in a humid or excessively dusty place. Use the supplied accessories only. Use of accessories other than those supplied may result in damage to the projector Ceiling mount. 8 When dismounting the projector from the projector Ceiling mount, be sure to unplug the AC power cord and other connecting cables beforehand. 9 Do not hit or hang any heavy objects on the projector Ceiling mount. If the projector Ceiling mount is 60m 18° m Use anchor bolt ● Dry-ceiling mounting thickness must be a minimum 70mm. Only sсrew(M6 × 55) is needed to be used for installation. If the wall is not strong enough, reinforce it sufficiently before installation. Concrete Ceiling mounting ø3mm >55mm 7 ● Concrete ceiling mounting thickness must be a minimum 100mm. Anchor bolt and sсrew (M6 × 55) are needed to be used for installation. B Use with products heavier than the maximum weights(Weight Capacity：＜25kg) indicated may result in instability causing possible injury. For safety reasons, check the strength of the wall before installation. If the wall is not strong enough, reinforce it sufficiently before installation. Extra screws and anchor bolt are backup! The angle of the ceiling wall is not more than 18° >55mm 3 To Set The Projector Ceiling Mount On The Wall ● Please contact reseller if you have any questions about mounting surface issue. Not use anchor bolt damaged, stop use and contact a qualified service person immediately. Dry- Ceiling mounting Please install this apparatus only on the horizontal surface instead of the slanting one. * Manufacturer is not liable for any damages or injury caused by mishandling or improper installation. diagrammatic NO presentation Projector mount (1) AL arm (1) diagrammatic NO presentation Ceiling plate with cover (1) designation Center Line Wooden Stud Checking The Supplied Accessories designation To Install The Projector On The Projector Ceiling Mount G D Screw(M3X10 ) 4 A E Screw(M4X10 ) 4 C Screw(M5X12 ) 4 4 G Screw(M5X15 ) quantity H Screw(M5X25 ) I 4 A Screw(M6X55 ) 5 B Φ10mm Anchor bolt 5 J spacer(8.0) 4 C Allen key 1 K M6 C onnecting screws 4 M5 nuts I Projector mounting plate quantity F a.Use the extend arms : 4 To thread the power cable and other cables from the AL pipe or F F Extend arms D、E H CAUTION: Make sure both mounting holes are on center line of the stud. Connecting Screw from screws K Parts List K J or To Set The Projector Ceiling Mount On The Wall Loose the screws b.Do not use the extend arms : D、E、F Connecting Screw from screws K Parts List K Loose the screws and remove the projector mounting plate www.multibrackets.com Do Not use Connecting screws 10 10 12 Use Connecting screws K 10 www.multibrackets.com Do Not use Connecting screws 10 10 Use Connecting screws K 10