Preview only show first 10 pages with watermark. For full document please download

M4 D9 Connections

   EMBED

Share

Transcript

M4 ECU Old style: Supports Hand calibrator up to EMP version 4.3. Can be used on ECU's with serial numbers less than 3000. 36 Way Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 2 3 4 5 D9 Male Part NO. 61010 Looking at back of connector (wire side) 1 6 7 9 Violet 24 Yellow 21 Green Blue Red Black Orange 12 Brown 10 M4 ECU D9 Male 1 New style: Hand calibrator not supported. D9 Male is for PCI cable connection only. A software update unit is not required for version 6.0 software and higher. 5 6 7 9 22 23 11 9 Violet 24 Red 11 Black 9 Orange 12 Brown 10 Green Blue 22 23 Yellow 21 OR Direct connection to PC. D9 female connection will only work on ECU's with serial numbers higher than 3000. No PCI cable required. MoTeC Title Date 2 D9 Female Part NO. 61015 3 5 M4 D9 Connections 28/05/2003 Drawn ST App Products Sheet No Drawing No ECU 1 of 1 A11