Transcript
S L I M F U L L M O T I O N M O U N T
MA641 U S E R M A N U A L Display Size: 30” -70” Maximum load: 100 lbs / 45 kg VESA Patterns: 100 x 100 to 600 x 400
ATTENTION: BEFORE INSTALLING, READ ALL WARNINGS AND CAUTIONS ON REVERSE SIDE. FOR MORE INFORMATION, GO TO: www.monstermounts.com
Warnings & Cautions IT IS HIGHLY RECOMMENDED THAT THIS PRODUCT BE INSTALLED BY A PROFESSIONAL. PLEASE REVIEW THIS INSTRUCTION MANUAL COMPLETELY BEFORE STARTING THE INSTALLATION PROCESS. WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instruction. WARNING: Improper installation can result in serious personal injury! Make sure that the structural members can support a weight factor five times the total weight of the equipment. If not, reinforce the structure before starting the installation. WARNING: Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted. WARNING: The installer is responsible for verifying that the wall or ceiling to which the mount is anchored will safely support the combined load of all attached components or other equipment. WARNING: The weight of the display placed on the mount must not exceed the maximum load capacity of the mounts. WARNING: Watch for pinch points. Do not put your fingers between movable parts. WARNING: Make sure the mount and brackets are correctly oriented. CAUTION: Check the unit for shipping damage before you begin the installation. CAUTION: Do not overtighten bolt.
2
Package contents
Front cover (x1) Cable cover (x6)
Wall plate cover (x2)
Wall plate (x1)
Vertical bracket (x1) M6 bolt (x4) M8 nut (x6)
Horizontal bracket (x2)
M8 washer (x6) VESA adaptor (x4)
1 Bubble level
(x1)
2 M6 box wrench
(x1)
3 M8 box wrench
(x1)
4 #4 allen key
(x1)
5 #5 allen key
(x1)
A1 M4x25 mm bolt
(x4)
B1 Lag bolt
(x6)
A2 M5x25 mm bolt
(x4)
B2 Concrete anchor
(x6)
A3 M6x25 mm bolt
(x4)
B3 Washer
(x6)
A4 M8x25 mm bolt
(x4)
A5 Spacer (optional) (x4) A6 Square washer
(x4)
3
1a. Mount on Wood Wall
1
2
x4 3 60 mm (2.4”) Ø5 mm (Ø3/16”)
B3
4
B1
1b. Mount on Solid Brick or Concrete Block
1
x6 2
60 mm (2.3”) Ø10.5 mm (Ø7/16”)
B2 B3
B1
5
2. Install the Wall Plate Covers Wall plate cover
3. Install the Front Cover and Vertical Bracket Front cover M8 nut
Vertical bracket
M8 washer
4. Install the VESA Adaptors (for TVs with horizontal VESA 600 only)
VESA 600 (mm) VESA 400 (mm)
Horizontal bracket
VESA 400 (mm)
VESA adaptor M8 nut
M8 washer
6
5. Install the Horizontal Brackets
tv
tv
tv
tv
A1-4
A5 A6 A6 Square Washer
M8 bolts M5 and M6 bolts M4 bolts M6 bolt
6. Hang the TV from the Arm M6 box wrench to adjust tilt tension
M8 box wrench to adjust horizontal level
M6 bolt
7
7. Cabling the TV
Detach cable covers Cables
Attach cable covers after routing cables
8. Adjustments & Use ±45˚ -2˚ to 12˚
±90˚
±3˚
Monster Mounts 20218 Hamilton Avenue Torrance, CA 90502 USA FOR MORE INFORMATION, VISIT: www.monstermounts.com
AUM120 v2.5
