Transcript
Specifications
MAC-101
1/2
The MAC 101 is a remarkably small, super light and easy-to-use LED moving head wash light with an amazingly bright beam for such a compact luminaire. It features rapid movement and calibrated colors with a low price tag that allows for revolutionary set, stage and decorative lighting design.
Agile RBG LED Wash-Beam light Color calibrated 2400 lm output Bright and tight beam (13° field angle) Smooth, electronic dimming Ultra-compact, low weight design (3.7 kg) Rapid movement – the fastest MAC ever High efficiency, low power consumption, long lifetime
Physical
Length: 241 mm across yoke Width: 241 mm across yoke Height: 304 mm Weight: 3.7 kg
Dynamic Effects
Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, color wheel rotation effect, random color Color mixing: RGB Red: 0 - 100% Green: 0 - 100% Blue: 0 - 100% Color temperature control: Variable 2500 - 10 000 K Shutter effect: Electronic, with pulse and random effects Electronic dimming: 0 - 100%, four dimming curve options Pan: 540° Tilt: 240° Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming
Control options: 3 control modes - RGB raw, RGB calibrated, Basic (RGB + CTC disabled) RDM: Implemented Control resolution: 8-bit, with 16-bit control of pan & tilt DMX channels: 8/12 Setting and addressing: Control panel with backlit graphic display Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM Transceiver: RS-485 Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box
Optics
Light source: Cree XP-E high power emitters Minimum LED lifetime: 50 000 hours (to >70% luminous output)* LED refresh rate: 1220 Hz
Olof Palmes Allé 18
8200 Århus N
Denmark
Tel. +45 87 40 00 00
Fax +45 87 40 00 10
Specifications
MAC-101
2/2
*Figure obtained under manufacturer´s test conditions
Construction
Color: Black or white Housing: High-impact flame-retardant thermoplastic Protection rating: IP20
Installation
Mounting points: One M12 threaded hole for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm from head, no minimum distance from base Minimum distance to illuminated surfaces: 200 mm
Connections
AC power input: Neutrik PowerCon AC power throughput: Neutrik PowerCon DMX data in/out: 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz Maximum total power consumption: 123 W Power supply unit: Auto-ranging electronic switch mode Main fuse: 5 AT (slow blow) Typical power consumption, all effects static, zero light output: <25 W
Typical Power and Current
100 V, 50 Hz: 122 W, 1.3 A, PF 0.991 120 V, 60 Hz: 121 W, 1.1 A, PF 0.987 208 V, 60 Hz: 123 W, 0.7 A, PF 0.938 230 V, 50 Hz: 123 W, 0.6 A, PF 0.915 240 V, 50 Hz: 123 W, 0.6 A, PF 0.900 PF = power factor Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal
Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C Minimum ambient temperature (Ta min.): 5° C Total heat dissipation (calculated, +/- 10%): 420 BTU/hr.
Approvals
EU safety: EN 60598-2-17, EN 62471 EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA E598-2-17 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
Included Items
M12 bolt suitable for use with Martin rigging clamps: User manual: 35000246
Related Items
Martin USB Duo™ DMX Interface Box: 90703010 Martin RDM 5.5 Splitter™: 90758150
Ordering Information
MAC 101™ in cardboard box: 90231600 MAC 101™ in 8-unit flightcase: 90231610 MAC 101™, white finish, in cardboard box: 90231630
Published on: 8 Jul 2014. © 2013-2014 Martin Professional ApS. Specifications subject to change without notice
Olof Palmes Allé 18
8200 Århus N
Denmark
Tel. +45 87 40 00 00
Fax +45 87 40 00 10
