Transcript
Mac Quick Start Guide
Ambir ImageScan Pro & TravelScan Pro ix Series
Install ImageScan Pro and TravelScan ix Macintosh ICA Drivers: 1. Download the ImageScan and TravelScan Pro ix Macintosh drivers from: http://www.ambir.com/FTP/Drivers/ambirixmacdrivers.zip NOTE: The single ZIP file contains the drivers for the following scanners: ImageScan Pro 667ix ImageScan Pro 687ix ImageScan Pro 490ix TravelScan Pro 600ix 2. Double click on http://www.ambir.com/FTP/Drivers/ambirixmacdrivers.zip This will create the file Ambir IX Series Driver Installer.PGK in the same folder. 3. Double click on Ambir IX Series Driver Installer.PGK to begin the installation. 4. Follow the on-screen prompts. 5. When the installation finishes, and “The installation was successful.” is displayed, click CLOSE 6. Restart the Macintosh by clicking on the Apple icon and select Restart.
©2015 Ambir Technology Inc. All Rights Reserved.
www.ambir.com/ambir-drivers
Mac Quick Start Guide
Ambir ImageScan Pro & TravelScan Pro ix Series
Scanning a document using Apple Image Capture (Mac OS X 10.6.x and higher) 1. Connect your Ambir ImageScan or TravelScan Pro ix scanner to your Macintosh. 2. Launch Image Capture. Click on Applications> Image Capture 3. Select the Ambir scanner listed under DEVICES
4. Select the Kind of document you are scanning, Resolution, Size, Orientation, Simplex/Duplex (not available on all models), Scan Destination, Saved File Name, and Output file format. If you are scanning documents of mixed sizes, select the largest size document you will be scanning from the size dropdown and then check Auto crop and deskew. 5. Launch Image Capture. Click on Applications> Image Capture 6. Select the Ambir scanner listed under DEVICES More Information: For complete details on using a scanner with OS X, see this Mac Basics article on the Apple website: http://support.apple.com/en-us/HT4505
©2015 Ambir Technology Inc. All Rights Reserved.
www.ambir.com/ambir-drivers
Mac Quick Start Guide
Ambir ImageScan Pro & TravelScan Pro ix Series
Uninstallation: 1. Disconnect the scanner. 2. Delete the ICA drivers. Go to: MacintoshHD> Library> Image Capture> Devices and delete all of the Ambir scanners listed.
3. Restart the Macintosh by clicking on the Apple icon and select Restart.
©2015 Ambir Technology Inc. All Rights Reserved.
www.ambir.com/ambir-drivers
