Transcript
Machine Starters Kit Océ CS9000 Low Solvent Series Printers Dear Customer, Thank you for buying an Océ CS9000 Low Solvent series Printer. This kit contains some tools to make your printer operative. Please refer to the diagram below to know what’s in the box. Refer to the next pages to know how to install or how to use these parts.
AP-40553
Page 1/12
CONTENTS TABLE 1. USER INFORMATION ......................................................................................................................................... 2 2. USER DOCUMENTATION CD ............................................................................................................................. 2 3. LABELS ........................................................................................................................................................... 3 4. INK STARTER SET ............................................................................................................................................ 5 5. USER’S MAINTENANCE KIT ............................................................................................................................. 10 5.1. Contents ............................................................................................................................................. 10 5.2. Maintenance Overview ...................................................................................................................... 11
1. USER INFORMATION There is a User’s Guide enclosed in the box which contains all the necessary information on how to install, to use and to maintain your Océ CS9000 series printer.
2. USER DOCUMENTATION CD On this CD you can find the User’s Guide and all available Operation Instructions* (*) An operation instruction is a summary of the User’s Guide which is translated in different languages.
AP-40553
Page 2/12
3. LABELS Please follow the instructions below to attach the labels on the correct place. KEYBOARD LABEL
HEATER LABEL STICK THE HEATER LABEL NEXT TO THE CAUTION LABEL ON THE FRONT COVER. CLEAN THE COVER WITH ISOPROPANOL BEFORE ATTACHING THE LABEL.
MAINTENANCE LABEL (SET) THIS LABEL IS AVAILABLE IN 6 LANGUAGES. CHOOSE ONE AND CLICK IT IN THE FRONTCOVER. YOU MAY REMOVE THE BACKING BUT IT IS NOT NECESSARY.
AP-40553
Page 3/12
HARMFUL LABEL STICK THE HARMFUL LABEL BETWEEN THE GOGGLE AND GLOVE LABEL ON THE WASTE LIQUID TANK. FIRST REMOVE GREASE WITH EASYPROPANOL.
AP-40553
Page 4/12
4. INK STARTER SET Use this kit (3 boxes of each 8 cassettes) to perform a first ink load. BOX 1
BOX 2
BOX 3
Low Solvent Setup Cleaning First Wash (8 cassettes)
Low Solvent Cleaning Second Wash (8 cassettes)
Océ IJC910 Low Solvent Ink Set (8 cassettes)
29952256
29952255
29952237 29952238 29952239 29952240
Black Cyan Magenta Yellow
Please follow the procedure below to perform the first ink load.
• • • • • •
Caution Be careful that ink does not get into your eyes or on your skin. When ink has become in contact with your eyes, immediately flush with water. When ink has become in contact with your skin, immediately wash your skin with soap. If you feel discomfort after a contact with the ink, consult a doctor immediately. Do not disassemble ink cassettes, ink may get into your eyes or on your skin. Only use Océ IJC910 Low Solvent ink and appropriate Low Solvent cleaning liquid.
Caution Before powering ON the unit, make sure to: • Remove the dummy cassettes. • Remove the waste tube clamps. • Remove the bag enclosing the waste tubes. • Connect the waste tubes. • Verify if you have all ink and cleaning cassettes needed. See parts needed below. Caution When powering ON the unit for the first time, a cleaning cycle automatically starts. Please follow the instructions mentioned on the display.
• • • •
Caution Be sure that there is always an ink or cleaning cassettes in every slot of the printer. Immediately install the ink cassettes after unpacking them, to prevent incorrect printing or poor print results. Use ink cassettes within a year from the date printed on the cassette packages. Replace the ink cassettes after six months from installation date.
AP-40553
Page 5/12
Parts needed: Before powering ON the unit for the first time, please be sure to have: • • •
8 cassettes with Low Solvent Setup Cleaning 8 cassettes with Low Solvent Cleaning liquid 8 cassettes with Low Solvent ink (2 x CMYK)
First ink load procedure: Step 1 :
Verify if the Waste bottle is empty.
Step 2 :
Power ON the unit.
Step 3 :
Remove all dummy cassettes as indicated on the display. The CS9000 will start pumping air for about 15 seconds.
Step 4 :
The following message will be displayed.
Step 5 :
The head will be unlocked. Moisten the caps with Low Solvent Cleaning Liquid.
Step 6 :
Install the 8 NEW Low Solvent Setup Cleaning (2) cassettes as requested on the display. See images below.
The display will show the remaining minutes, 9 min for a 65” machine and 13 min for a 90” machine:
AP-40553
Page 6/12
(or 9 min for 65” machines) Please note that you have to wait 1 minute if the display mentions 0 minutes:
Step 7 :
Empty the Waste bottle as requested on the display below.
Step 8 :
Remove all Low Solvent Setup Cleaning cassettes when the message below appears.
Step 9 :
Install the 8 NEW Low Solvent Cleaning cassettes (2) as requested on the display. See images below.
The display will show the remaining minutes, 9 min for a 65” machine and 13 min for a 90” machine:
(or 9 min for 65” machines) Please note that you have to wait 1 minute if the display mentions 0 minutes:
AP-40553
Page 7/12
AP-40553
Page 8/12
Step 10 : Empty the Waste bottle as requested on the display below.
Step 11 : Remove all Low Solvent Cleaning cassettes when the message below appears.
Step 12 :
Insert the correct configuration of Low Solvent Ink cassettes as requested on the display:
The ink cassette must be put in a specific slot according to the type and colour used. See configurations below. 2 x 4 Colour configuration:
Inserting cassettes: • •
AP-40553
Insert the cassettes (2) in the printer slots (1) with the arrow mark (3) face-up and pointing to the rear of the printer as indicated on the image below. Insert the cassettes (2) as far as possible.
Page 9/12
Step 13 : Wait until the Ink Refill sequence has been finished, the display will show the remaining minutes, 9 min for a 65” machine and 13 min for a 90” machine :
(or 9 min for 65” machines) Please note that you have to wait 1 minute if the display mentions 0 minutes:
Step 14 : Empty the Waste bottle when the display requests it.
Notes During ink installation, note the following. • Do not power off the printer. • Do not unplug the power cable. • Do not open the front cover.
Notes This product has been tuned for the use of Océ IJC910 Ink cassettes. If other manufacturers’ products are used, drawing results become faint or ink ends are not properly detected, and the warranty will not cover any resultant breakdown.
AP-40553
Page 10/12
5. USER’S MAINTENANCE KIT (29801288) To ensure stable quality and to prevent that some parts get broken or become congested, the importance to perform the daily, weekly and monthly maintenance is very high.
5.1. Contents
AP-40553
1 2 3 4 5 6
Absorbent Plate Wipers Spitting Box Pads Cleaning Liquid 250 ml Wiper Arm Assembly Good Shape Kit
6 24 12 3 1 1
1 2 3 4
Gloves Pipettes Swabs Polynit Wipers
300 60 150 300
Page 11/12
5.2. Maintenance Overview This section describes the periodical services required for this machine. The periodical services ensure stable print out quality of the machine. In the periodical services, some service parts may be checked, cleaned, or replaced. Perform periodical inspections according to the table below.
N°
• •
Action
Frequency
1 2 3
Clean wipers Flush caps in maintenance station Clean the edges of the caps in maintenance station
4 5
Clean the area around the caps Clean around bottom of the heads
Weekly maintenance
6 7
Change the wipers Change upper sponge at back of the capping station
Monthly maintenance
8
Replacing the sponge in the spitting box
2 weekly maintenance
9
Replacing the wiper arm assembly
Daily maintenance
once
Notes All cleaning in “Ink areas” must be done with Low Solvent cleaning solution. Above maintenance cycle is based on use: 8 hours / day, 5 days / week and 44 weeks / year. If the machine is used more often, maintenance periods will come earlier.
Important IN-THE-BOX OF THE KIT, A DOCUMENT IS ENCLOSED WHICH WILL GUIDE YOU THROUGH THE DAILY, WEEKLY AND MONTHLY MAINTENANCE WHICH IS NEEDED FOR THE OCÉ CS9000 SERIES PRINTERS.
AP-40553
Page 12/12
