Transcript
www.nguyenxuong.com
ORDERLINE 65 6865 3433
Cutting & Machine Tools, Vices & Clamps
Tools & Tool Storage Cutting & Machine Tools, Vices & Clamps - contents 73 Hand Tools
1706
74 Handlamps & Torches
1841
1894 Machine Tools
1894
75 Power Tools & Accessories
1853
Vices
1895
76 Tool Kits & Tool Storage
1877
Multi-Purpose Third Hand System
1896
Clamping & Workholding Tools
1897
Folding And Cutting
1898
Presses
1898
3000lb Press
1898
Cutters & Punches
1899
78 Workshop Equipment
1902
79 Soldering, Desoldering & SMT Equipment
1904
77
Visit our website for additional price information and exciting promotions
1893
www.nguyenxuong.com
ON-LINE www.rssingapore.com
Cutting & Machine Tools, Vices & Clamps
Starter Kit & Hose Pack A selection of assorted 1⁄4 in. or 1⁄2 in. modular hose accessories enabling initial systems to be built.
Grinding
Contents of Hose Packs
Bench Grinder
1⁄4
Speed Sharpener
1⁄2
in. Bore Description Hose 5 3⁄4 in. Length
∅150mm and ∅200mm wheel versions available Power input: 230V Supplied with: 2 wheels, one fine and one coarse, safety eye shields, tool rests and spark guards.
in. Bore Qty. Description 2 Hose 5 1⁄2 in. Length
Qty. 2
2850 rpm Yes Contents of Starter Kit 1⁄4
Description Bench Grinder 150mm Bench Grinder 200mm
Grinding Wheel Diameter 150mm 200mm
Grinding Wheel Diameter
Stock no.
150mm 200mm
250-1729 250-1735
Grinding Wheel Power Output Weight Bore (W) (kg) 13mm 375 10.5 16mm 560 18 Price per
OM
unit unit
S$
S$
Stock no. 250-1729 250-1735 S$
1+ 158·50 1+ 225·00
Stock no. 774-818
Price per
Stock no.
1⁄4
Starter Kit - in. Bore Starter Kit - 1⁄2 in. Bore Hose Pack - 1⁄4 in. Bore Hose Pack - 1⁄2 in. Bore
Suitable for use on most bench grinding machines, up to 8 inches (200mm) wheel diameters. Manufactured from a cast aluminium frame measuring 160mm x 150mm 4mm thick polycarbonate screen Can simply be bolted to the casing of most popular machines, and have a locking pivot connection allowing the guards to be positioned at any desired angle
OM
unit
in. Bore Description 13 in. length hose 1⁄4 in. nozzle 3⁄8 in. nozzle 1⁄2 in. nozzle 3⁄8 in. NPT conn 1⁄2 in. NPT conn
Qty. 1 1 1 1 1 1
Kit Description
Grinding Wheel Guards
77
1⁄2
in. Bore Description 13 in. length hose 1⁄4 in. nozzle 1⁄8 in. nozzle 1⁄16 in. nozzle 1⁄4 in. NPT conn 1⁄8 in. NPT conn
623-5397 623-5088 623-4978 623-5094
Price per unit unit unit unit
OM
S$
1+ 1+ 1+ 1+
30·80 30·80 20·90 23·90
Qty. 1 1 1 1 1 1 S$
S$
Hose Assembly Pliers 1⁄4 in. & 1⁄2 in. System To facilitate assembly and disassembly of 1⁄4 in. and 1⁄2 in. hose systems.
S$
S$
S$
1+ 176·00
Huntington Pattern Wheel Dresser For wheels up to 20in.
Stock no. 389-0755
Price per
OM
S$
1+
29·00
unit
S$
S$
0.5mm carat industrial diamond For use on wheels up to 200mm Length 150mm, diameter 12.7mm
389-0761
Price per
OM
S$
1+
73·00
unit
S$
S$
Guards Shield Kit
Provides protection from fluid splash and flying swarf Supplied complete with 14in. adjustable (3⁄4 in. dia.) arm, magnetic base and fitting for fixed mounting. Ideally suitable for small machine tools These guards are NOT a substitute for correct machine guarding (e.g. lathe guards) but are designed to be used in conjunction with factory fitted machine guards, giving the operator extra protection against flying swarf and coolant, etc. Screen size: 300mm x 216mm Stock no. 623-6508
Price per unit
OM
S$
S$
S$
1+ 100·50
Modular Hose System - Kits & Accessories A high quality adjustable modular hose system, for coolants, fluids and air applications Available in 1⁄4 in. and 1⁄2 in. bore All components are fully interchangeable and manufactured from acetal copolymer which is nonconductive and resistant to most organic chemicals The unique interlocking feature permits the user to construct hose systems to meet specific requirements Individual parts are sold separately Applications in some specific strong acidic environments (i.e. 10% hydrochloric acid, 10% sulphuric, 10% nitric) or strong bases (i.e. pH 4.0) are not recommended.
1894
Stock no. Price per
Hose Assembly Pliers - 1⁄4 in. Bore Hose Assembly Pliers - 1⁄2 in. Bore
623-5218 623-5189
unit unit
OM
S$
1+ 1+
30·00 33·60
S$
S$
Modular Hose System - Nozzles, Valves and Fittings Nozzles - 1⁄4 in. & 1⁄2 in.
Diamond Wheel Dresser
Stock no.
Kit Description
OM = Order Multiple a New product to range
A high quality adjustable modular hose system, for coolants, fluids and air applications. Available in 1⁄4 in. and 1⁄2 in. bore All components are fully interchangeable and manufactured from acetal copolymer which is non-conductive and resistant to most organic chemicals The unique interlocking feature permits the user to construct hose systems to meet specific requirements. Individual parts are sold separately Applications in some specific strong acidic environments (i.e. 10% hydrochloric acid, 10% sulphuric, 10% nitric) or strong bases (i.e. pH 4.0) are not recommended. Kit Description
Bore (in.)
1⁄16
1⁄4
in. Round Nozzle 1⁄8 in. Round Nozzle 1⁄4 in. Round Nozzle 1 in. Flared Nozzle 1⁄4 in. Round Nozzle 1⁄2 in. Round Nozzle 1 1⁄4 in. Flared Nozzle
Stock no. 623-4984 623-4990 623-5000 623-5022 623-5050 623-5101 623-5123
1⁄4 1⁄4 1⁄4 1⁄2 1⁄2 1⁄2
Price per unit unit unit unit unit unit unit
OM
S$
4+ 4+ 4+ 2+ 4+ 4+ 2+
1·36 1·60 1·36 5·50 1·62 1·62 5·70
S$
S$
S$
S$
Metal Valves - 1⁄4 in. & 1⁄2 in. A high quality adjustable modular hose system, for coolants, fluids and air applications. Available in 1⁄4 in. and 1⁄2 in. bore Applications in some specific strong acidic environments (i.e. 10% hydrochloric acid, 10% sulphuric, 10% nitric) or strong bases (i.e. pH 4.0) are not recommended.
Product Description
Bore (in.)
Metal - 1⁄8 in. NPT Male Metal - 1⁄4 in. NPT Male Metal - 3⁄8 in. NPT Male Metal - 1⁄2 in. NPT Male
1⁄4 1⁄4 1⁄2 1⁄2
Stock no.
Price per
OM
S$
623-5202 623-5224 623-5173 623-5195
unit unit unit unit
1+ 1+ 1+ 1+
8·60 10·10 9·25 9·35
www.nguyenxuong.com
ORDERLINE 65 6865 3433
Cutting & Machine Tools, Vices & Clamps
Male NPT Valve - 1⁄4 in. & 1⁄2 in.
Description
A high quality adjustable modular hose system, for coolants, fluids and air applications. Available in 1⁄4 in. and 1⁄2 in. bore All components are fully interchangeable and manufactured from acetal copolymer which is nonconductive and resistant to most organic chemicals The unique interlocking feature permits the user to construct hose systems to meet specific requirements. Individual parts are sold separately Applications in some specific strong acidic environments (i.e. 10% hydrochloric acid, 10% sulphuric, 10% nitric) or strong bases (i.e. pH 4.0) are not recommended.
3 in. Vice 4 in. Vice 6 in. Vice
Product Description
Stock no.
1⁄4
in. NPT Valve 1⁄2 in. NPT Valve
623-5280 623-5381
Price per unit unit
OM
S$
2+ 2+
9·10 9·60
S$
S$
1⁄4
1⁄4
1⁄4
1⁄4
in. Y Fitting in. Elbow Fitting 1⁄8 in. NPT Connector 1⁄4 in. NPT Connector 3⁄8 in. NPT Connector 1⁄2 in. NPT Connector
Stock no. 623-5044 623-5066 623-5016 623-5038 623-5145 623-5167
1⁄8 1⁄4 1⁄2 1⁄2
Price per unit unit unit unit unit unit
Price per
1+ 1+ 1+
121·00 235·00 690·00
unit unit unit
S$
S$
OM
S$
2+ 2+ 4+ 4+ 4+ 4+
5·70 5·15 1·88 2·21 1·62 1·62
Price per
OM
S$
1+
56·80
unit
S$
S$
S$
S$
S$
S$
S$
S$
S$
S$
General Purpose Bench Vices High quality general purpose bench vices manufactured from high grade cast iron Replaceable hardened steel jaws Integral anvil Central screw covered to prevent ingress of dirt Hammered enamel finish Weight: 9.8kg (4in. vice); 21.6kg (6in. vice) S$
S$
Jaw Opening
100 mm
Description
Stock no.
Price per
a554-425
4 in. Vice
unit
OM
S$
1+
85·00
77
General Purpose Swivel Bench Vice High quality general purpose swivel base bench vices manufactured from high grade cast iron. Replaceable hardened steel jaws Integral anvil Central screw covered to prevent ingress of dirt Hammered enamel finish Weight 11kg (4 in. vice); 23.6kg (6 in. vice)
A set of 4 pin vices for holding wires, scriber points and small files, taps, drills, etc A hole extends through the length of the handle enabling wires of any length to be held Easy to rotate between thumb and finger when drilling small work Manufactured with hardened jaws and nickel plated handle and binding nut Chuck sizes: 0 - 1.01, 0.76 - 1.57, 1.27 - 3.17 and 2.92 4.74mm Supplied in handy plastic wallet unit
S$
4 1⁄2" light Duty
Stock no.
Pin Vice Set
539-952
OM
Cast-iron construction for strength & durability Roll-formed screw threads ensure smooth operation and durability Base bolts directly to work bench for stability Base swivels and locks for versatility Chrome-plated to resist corrosion
a512-112
Hand and Pin Vices
Stock no.
602-252 542-217 602-280
Type
A high quality adjustable modular hose system, for coolants, fluids and air applications. All components are fully interchangeable and manufactured from acetal copolymer which is non-conductive and resistant to most organic chemicals The unique interlocking feature permits the user to construct hose systems to meet specific requirements. Individual parts are sold separately Applications in some specific strong acidic environments (i.e. 10% hydrochloric acid, 10% sulphuric, 10% nitric) or strong bases (i.e. pH 4.0) are not recommended. Bore (in.)
Price per
Max Steel Bench Vice - Light Duty
Junction Pieces/Connectors
Kit Description
Stock no.
Description
Stock no. a554-415
Swivel Bench Vice - 4 in. Jaw
Price per unit
OM
S$
1+ 113·00
RS G-Clamp Vice
OM
S$
1+
87·50
S$
S$
Bench Vices Multi -Angle Base vice
This vice is easily clamped to any surface up to 70mm thick by means of its aluminium clamp bracket. The Vice is manufactured from cast iron with steel vice jaws. It can swivel through 360 degrees and is locked by a single lever. There is a flat anvil situated at the rear of the vice body Jaw opening 40mm Jaw width 63mm G-Clamp capacity 70mm Jaw Material Jaw Width
Made of durable cast iron Infinite and lockable positioning achieved with a swivel ball design Easily attatched to most work surfaces with integral screw clamp Removalble jaw pads protect surfaces from marring and damage
Steel Jaw Opening 63 mm
Stock no. 614-1488
40 mm
Price per unit
OM
S$
1+
85·00
Accessories for Engineers Vices Stock no. a667-7189
Price per unit
OM
S$
1+
45·80
S$
S$
Engineers Vices Substantial bench mounting vices with various size jaw widths, for general purpose gripping applications. The body and sliding jaw are manufactured from high grade grey cast iron. The steel main screw engages with a long barrelled "unbreakable" nut Finished in stove enamelled blue Detachable fibre grips are available for clamping softer materials and finished surfaces Replacement steel jaws are also available (see Accessories for Engineers Vices) Description 3 in. Vice 4 in. Vice 6 in. Vice
Jaw Width (mm) 75 100 150
Jaw Opening (mm) 85 120 205
Description 3 in. Fibre Grips 4 in. Fibre Grips 6 in. Fibre Grips
Manu. Part No. 1B T3B 6B
Stock no. 602-268 542-194 602-296
Price per unit unit unit
OM
S$
2+ 2+ 2+
15·10 23·50 28·70
Stock no. 602-252 542-217 602-280
www.rssingapore.com
Visit our website for additional price information and exciting promotions
1895
www.nguyenxuong.com
ON-LINE www.rssingapore.com
Cutting & Machine Tools, Vices & Clamps Mounting Rod
Machine And Drill Vices
∅12.7mm, 500mm length mounting rod designed to locate in the coupling of either of the bases and accept the rod mounting clamp to construct a complete 3rd hand system
Cross Vices General purpose cross vice, with 72mm width steel jaws. When used with a pillar drill will turn it into a light vertical milling machine Easy wind movement in two directions Hardened and ground steel jaws
Stock no. 546-360 Jaw Opening (mm)
Weight (kg)
72 96
6.6 10
Stock no.
Price per
104-997 105-192
unit unit
OM
S$
1+ 1+
196·00 199·50
S$
Cast iron base; hardened steel jaws Handle is mounted on ball bearings to provide more gripping power, smooth action and long life Will grip round, square, thin and irregular sections Can easily be mounted and clamped on machine tool beds and standard drill stands For use in drilling and light milling operations Admits work (lower): 51mm, (upper): 59mm Base area: 128mm x 148mm Depth: 31mm
77
Steel 83 mm Stock no. 463-7296
Jaw Opening Weight
546-376
S$
S$
S$
1+ 156·50
Shaft Vice For use on a milling machine or drill press Clamping capacity 10-80mm diameter Jaws have case hardened, heat treated linings Base and jaws are made from cast iron The base of the vice has a V-block which is made from hardened steel Can be set up either in a horizontal or vertical position Fitted with two adjustable sliding blocks Non-working surfaces are smoothed and painted
Stock no. 463-7303
Price per
Stock no. 549-606
OM
S$
1+
450·00
S$
S$
Stock no.
A retaining arm and sponge plate which in conjunction with PCB holder stock no. 546-354 and either of the bases (ordered separately) can be used as a simple and convenient printed circuit board component workframe. The PCB retainer/holder pictured shows the assembly fitted to a base A one inch thick sponge plate, held by the retaining arm, presses assembled components on the PCB By using the universal joint in the base, the completed assembly can be quickly swivelled round to present the other side of the assembled board ready for soldering The sponge is cross-cut into rectangular sections to effect uniform retention of adjacent components having different dimensions The G-clamp base assembly will be particularly useful for board assembly where workspace is at a premium Note: For smaller PCBs, the retaining arm can be shortened by replacing the middle extension rod, stock no. 547-026 with 50 mm extension rod, stock no. 547-010. Price per
549-527
unit
OM
S$
S$
S$
1+ 106·50
Bench Mounting Bases Choice of two bench mounting bases available, one top (surface) mounting, the other G-clamp fixing. Both types incorporate a lockable ball coupling with wide swivel angle, which accepts any of the three vices, the PCB holder or mounting rod for 3rd hand assemblies Bench top mounting base supplied with four self adhesive feet Dimensions (surface mount): H 120mm, ∅190; G- clamp fix H 190, Throat: 55mm
Description
Stock no.
Bench Surface Mount Bench G-clamp Mount
546-281 546-297
Price per unit unit
2+
16·50
unit
OM
S$
S$
78 8 mm
Jaw Opening
S$
S$
Price per
S$
S$
S$
S$
546-382
75 22 mm
Jaw Opening
Price per unit
OM
S$
2+
31·10
OM
S$
1+
29·70
39 mm
Vices Choice of three types of vice available, each fitted with a stem to locate in the coupling of either of our bases. The short and long vices employ a quick release and adjustment mechanism to enable fast fixing and removal of the workpiece by only limited rotation of the side bar They are both supplied with two pairs of moulded "V" slot jaw linings, one pair plain, the other serrated Additional linings are available separately The PCB vice with conventional screw adjustment has a jaw opening of 175mm and is designed to accommodate PCBs via integral moulded multi- slotted jaws A G-clamp (stock no. 546-297) is required to mount any of the vices to a bench, this can be ordered separately Description Overall Length (mm) Jaw Width (mm) Jaw Opening (mm) Stock no. Short Vice 210 54 90 546-304 Long Vice 280 54 160 546-310 PCB Vice 270 56 175 546-326 Description
Stock no.
Short Vice Long Vice PCB Vice
546-304 546-310 546-326
Price per unit unit unit
OM
S$
S$
1+ 120·50 1+ 157·00 1+ 73·50
S$
1+ 102·00 1+ 121·00
OM = Order Multiple a New product to range
16 mm
unit
My Account www.rssingapore.com
1896
S$
A miniature moulded vice with conventional screw adjustment designed to fit the rod mounting clamp. Plain block jaws of width 22mm provide an opening of 39mm to allow fitting of a variety of workpieces
PCB Retaining Arm & Sponge Plate
Stock no.
OM
Mini Vice
10 → 80 mm 21 kg
Component Parts
Retaining Arm and Sponge Plate
S$
Parallel action fingers with flat serrated jaws for gripping both round and flat sided components. Jaw aperture is adjustable to one of four ratchet positions The jaws are biased to close by spring action to give light component gripping for positioning Tighter clamping may be effected by turning a knurled screw Jaws also have a longitudinal "V" groove for gripping small pins 1.6mm dia. minimum The body is designed to fit the rod mounting clamp
Overall Length (mm) Jaw Width
Description
Price per
Overall Length (mm) Jaw Width
Jaw Opening Weight
unit
S$
Flat (Parallel) Jaw Fingers OM
Cast Iron 100 mm
20·20
Clamping Fingers and Vices
unit
Jaw Material Jaw Width
S$
1+
Rod Mounting Clamp
Stock no.
60 mm 3.45 kg
Price per
OM
Moulded, screw fixing clamp with a detachable swivel knuckle joint designed to fit the mounting rod and accept the mini vice, fingers, or bar mounting kit. Two clamps supplied in each set to provide the basic flexible building blocks for the 3rd hand system Dimensions (mm): H 22, W 22, L 68
Drill Vice
Jaw Material Jaw Width
Price per unit
S$
www.nguyenxuong.com
ORDERLINE 65 6865 3433
Cutting & Machine Tools, Vices & Clamps Grips
Complete Sets
These grips are manufactured from glass-reinforced nylon for long life and have swivelling jaws for maximum purchase of work pieces The inside of the jaws are serrated for use on round or curved work pieces They have an extra strong spring making them ideal for gluing, clamping and securing Three sizes are available
PCB Work Kit A complete kit of parts for holding printed circuit boards for building, modification or repair. Supplied in a fitted carrying case. Kit Contents 1 x Uni holder vice 1 x ’G’ clamp base and ball 1 x PCB holder 1 x Retaining arm and sponge plate 1 x Mounting clamp 1 x 250mm column 1 x 50mm extension rod 1 x 100mm extension rod 1 x Bar mounting kit 2 x PCB clamps 2 x Male adaptors Stock no. 180-875
Price per unit
OM
S$
1+
540·00
S$
S$
Description
Overall Length (mm)
4 in. (100mm) 6 in. (150mm) 9 in. (225mm)
100 150 225
Stock no.
Price per
OM
S$
231-263 231-279 231-285
unit unit unit
1+ 1+ 1+
3·99 6·15 9·65
S$
S$
S$
S$
Machine Clamps Clamping Set 58 piece steel clamping kits with storage rack, for use on milling, boring machines etc. Covers a wide range of applications
Hand Clamps & Spreaders
Kit Contents 4 each 3, 4, 5, 6, 7 and 8in. long studs, 6 T-nuts, 6 flange nuts, 4 coupling nuts, 6 step clamps and 12 (6 pairs) step blocks Type Clamp Set
Bar Clamps Function as one hand clamp or one hand spreader simply by reversing the fixed jaw Soft gripping pads to prevent damage to delicate surfaces Quick release trigger for rapid positioning or releasing Available in 4 sizes: 6in. (150mm), 12in. (300mm), 18in. (455mm), 24in. (605mm)
Description
Bar Clamp Capacity Description/Clamping Capacity 6in. (150mm) 12in. (300mm) 18in. (455mm) 24in. (605mm) Description
in. Table Slot 5⁄8 in. Table Slot
Spreading Capacity 195mm - 360mm 195mm - 515mm 195mm - 665mm 195mm - 820mm Stock no.
Bar Clamp 6in. (150mm) Bar Clamp 12in. (300mm) Bar Clamp 18in. (455mm) Bar Clamp 24in. (605mm)
Stock no.
1⁄2
Price per
362-0180 362-0196 362-0203 362-0219
unit unit unit unit
Price per
a713-3772 a713-3781
OM
S$
1+ 1+
263·00 313·00
unit unit
77
Toggle Clamps - Straight Line Push-pull Light Duty Base-mounting
OM
S$
1+ 1+ 1+ 1+
44·60 46·40 46·90 62·00
S$
S$
Straight line long-stroke toggle clamps for use where quick and positive locking is required. Steel construction Comfortable cushioned PVC handle grips
G-Clamp A range of four engineer’s G-clamps. All have smooth running screw threads with rotatable captive pads on the lower clamping face. Finished in stove enamelled blue.
Stock no. 254-670
Price per unit
OM
S$
1+
15·40
S$
S$
S$
S$
Nose or Flange Mounting, 250kg Description 2 in. (50mm) 3 in. (75mm) 4 in, (100mm) 6 in. (150mm)
Jaw Opening (mm) 50 75 100 150
Description
Stock no.
2 in. (50mm) 3 in. (75mm) 4 in, (100mm) 6 in. (150mm)
542-447 542-431 542-425 602-319
Throat Depth (mm) 25 50 60 80 Price per unit unit unit unit
Material Drop-Forged Steel Drop-Forged Steel Cast Steel Cast Steel
OM
S$
1+ 1+ 1+ 1+
15·50 21·50 36·20 52·00
Stock no. 542-447 542-431 542-425 602-319 S$
Straight line long-stroke toggle clamps for use where quick and positive locking is required. Steel construction Comfortable cushioned PVC handle grips Supplied with lock nut Holding Force Handle Opening Angle Stock no.
S$
254-686
250 kg 185 °
Overall Length (mm)
136
Price per unit
OM
S$
1+
41·80
Toggle Clamps Hook Clamp
Special Purpose Clamps
A hook clamp which can be mounted horizontally or as a corner clamp. The finish is zinc plated and passivated
Toolmakers Clamps
Holding Force Handle Opening Angle
Available in two sizes Case hardened steel jaws with tempered clamping screws Screw heads are knurled with cross holes for tightening Fitted with a screw clip to keep the jaws in place Description Overall Length (mm) Throat Depth (mm) Stock no. 3 in. (75mm) 75 24 549-268 4 in. (100mm) 100 44 549-274
Description
Stock no.
3 in. (75mm) 4 in. (100mm)
549-268 549-274
Price per unit unit
OM
S$
1+ 1+
28·30 36·10
Stock no. 254-709
200 kg 155 ° Price per unit
Overall Length (mm) OM
S$
1+
24·70
122 S$
S$
Latch Clamp
S$
S$
A latch clamp which can be configured for either horizontal or vertical (corner) operation. Note: The U-bolt and its fittings are supplied loose allowing the clamp to be assembled in either the vertical or horizontal configuration. Two versions are available, one in zinc plated and passivated steel, the other in stainless steel Nominal holding force 2000N (204kgf) Handle opening angle 120° Type Description 135mm Steel 135mm St. Steel
Latch Stock no. 254-866 254-800
New products available online every week
Price per unit unit
OM
S$
1+ 1+
40·10 41·90
S$
S$
1897
www.nguyenxuong.com
ON-LINE www.rssingapore.com
Cutting & Machine Tools, Vices & Clamps Toggle Clamps A range of horizontal and vertical toggle-action clamps, ideal for many temporary clamping uses, e.g. printed circuit board/module test jigs or general production or workshop use where fast and effective clamping is required. The design of the clamps enables speed of operation and release, combined with high holding force Supplied complete with holding spindle which may be adjusted for height and overall reach Available in steel or stainless steel - dimensions are the same Description
Overall Length (mm)
Steel,H,50kg Steel,H,75kg Steel,H,150kg St. Steel,H,50kg Steel,V,75kg St. Steel,H,75kg St. Steel,H,150kg Steel,V,150kg Steel,V,250kg St. Steel,V,75kg St. Steel,V,150kg St. Steel,V,250kg
76 105 160 76 56 105 160 67 112 56 67 112
Stock no.
Price per
OM
S$
254-636 254-620 254-614 254-715 254-642 254-787 254-771 254-658 254-664 254-743 254-759 254-765
unit unit unit unit unit unit unit unit unit unit unit unit
1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+
12·30 17·50 19·70 19·50 17·00 31·80 38·00 19·20 24·20 34·30 38·00 50·50
S$
Press, Dieholder & Punch & Die Sets 3000lb Lever Press
S$
Circular hole punches Corner notching tool Rectangular hole punches V bending (up to 90°) tool Electrical component punches Crop and shear tool
Toggle Clamp Accessories
Louvre aperture forming tool Key hole punches Lug forming tool Slotting tool ’D’ connector punches Nibbling tool
Swivel Foot Spindles
77
A series of swivel foot spindles in 5, 6 and 8mm thread diameters to fit RS Toggle Clamps. For use where a large area needs to be clamped or the clamping force needs to be spread over a larger area than just the spindle and surface area The spindles are supplied with 2 locknuts and 2 flanged washers each Description
Stock no.
M5 M6 M8
254-816 254-822 254-838
Price per
OM
S$
1+ 1+ 1+
6·60 7·70 9·70
unit unit unit
A bench mounting, hand operated lever press which together with a variety of punching, cutting and forming tool accessories (separately available) will provide an invaluable service for sheet metal working in both workshop and production environments.,Manufactured in high quality carbon steel with a stove enamel finish, the press is easy to set up and operate. The rack and pinion lever operated ram can apply a constant pressure up to 3000lb over the full stroke. A 22in. steel lever is supplied with the press. The lever slides and screw locks into a boss with 90° cross holes, so that the angle and length of lever movement can be adjusted to various attitudes. The press is suitable for working on many sheet materials, see compatibility table below for maximum thicknesses.Accessories include:
S$
Maximum Sheet Material Thickness Material fibreglass paper PCB (s.r.b.p.) aluminium mild steel
S$
Stock no. 541-309
Thickness max. 2 mm 3.2 mm 2.5 mm 1.62 mm Price per unit
OM
S$
1+
1070·00
S$
S$
S$
S$
S$
S$
3000lb Dieholders
Shears
Two dieholders to accommodate the complete range of circular dies, component dies and nibbling tools.Use Dieholder type A for 3 to 12mm dies plus all nibbling tool dies.Use dieholder type B for 12·5 to 27·5mm dies plus all component and keyhole dies.
Metal Shear Will cut plate and round bar Blades easily removed for sharpening or replacing Shear capacity bar 13mm Extension arm supplied Shear Capacity Bar Shear Capacity Plate
13 (round) mm 6 mm
Blade Length Weight
175 mm 18 kg
Description
Stock no.
Price per
OM
S$
541-719
unit
1+
51·50
541-589
unit
1+
67·50
Type A Circular Dieholder (3 to 12 mm) Type B Circular Dieholder (12.5 to 27.5 mm) Stock no. 546-9678
Price per unit
OM
S$
1+
310·00
S$
S$
Punch & Die Boxed Sets A series of two boxed punch and die sets covering metric ranges (see contents). Boxes include dieholders and stripper, as appropriate, plus fixing screws and hexagon keys. Each set of parts is conveniently and safely stored individually in polystyrene inserts within a strong steel box (hinged top with a catch).
Toggle & Arbor Presses
Contents Stock no. Box Size 541-466 250x250x89mm
Manual Toggle Press Manual toggle press designed for light/medium duty work such as forming, swaging, riveting, marking, piercing and assembly. Constructed from malleable iron, machined on the base mounting faces for accurate alignment of tools. An adjustable bolt at the rear of the frame allows the toggle mechanism to be stopped before going ’on-centre’ for quick return and light operation, or ’over-centre’ in order to hold work under pressure. Cost effective: makes dedicated tool fitting to a number of presses economical, eliminating the need for expensive and time consuming re-tooling of a single press Choice of two handle mounting positions for ease of operation, with a recessed base for dedicated tool fitting
541-444
250x250x89mm
Cut out diameter 3 - 12 12.5 - 27.5
Contents 13 dies and punches 3 mm to 12 mm, dieholder; stripper, hexagon keys, screws and washers. 7 (hardened steel) dies and punches 12.5 mm to 27.5mm, dieholder, hexagon keys and screws. Stock no. 541-466 541-444
Price per 1 set 1 set
OM
S$
1+ 1+
570·00 315·00
Punches & Dies Circular Hole Punches and Dies Tool Steel Description
Overall Height Press Force Maximum Workpiece Throat Depth (mm) (kgf) Height (mm) (mm) 600 kgf Toggle Press 232 600 75 50 1200 kgf Toggle Press 330 1200 100 60 Description
Stock no.
600 kgf Toggle Press 1200 kgf Toggle Press
1898
254-844 254-850
Price per unit unit
OM = Order Multiple
OM
S$
1+ 1+
260·00 560·00
S$
Stock no. 254-844 254-850 S$
Fully hardened and tempered tool steel punches and dies for accurate, clean hole punching in a wide range of materials. Dies are counterbored to prevent material build up. For accurate hole alignment, smaller punches (3 to 12 mm) include a fixed centre location point. Larger punches (12.5 to 25 mm) have a retractable spring loaded centering pin. See table below for max. material thicknesses Punch & Die Set Maximum Thickness 3000lb Press Steel Aluminium 3 to 5mm 1.6 2.5 6 to 10mm 1.6 2.5
5000lb Press Steel Aluminium 1.6 2.5 2 3
www.nguyenxuong.com
ORDERLINE 65 6865 3433
Cutting & Machine Tools, Vices & Clamps Size (mm)
Size (mm) Suitable Dieholder 3 4 5 6 7 10
Stock no.
541-719 541-719 541-719 541-719 541-719 541-719
541-927 541-905 541-882 541-860 541-854 541-826
Price per 1 set 1 set 1 set 1 set 1 set 1 set
OM
S$
1+ 1+ 1+ 1+ 1+ 1+
39·60 39·60 38·70 36·10 39·60 39·60
S$
S$
60.0 70.0
Stock no. 543-793 543-800
Price per
OM
unit unit
S$
S$
S$
S$
S$
1+ 100·00 1+ 78·50
Hydraulic System Cutters Hole cutters for use specifically with the hydraulic pump/cylinder stock no. 605-223. Punches and dies designed to cut mild steel and aluminium up to 3mm (10 swg) thick. The larger hole cutters are particularly useful when panel mounting fans and DIN style equipment. Instructions included.
Hydraulic Pump & Cylinder Hydraulic Pump & Cylinder Producing 5000 psi pressure over a 19mm stroke, the pump removes much of the effort required when cutting by hand and has the necessary force to make much larger holes in panels up to 3mm (10 swg) thick steel (hand hole cutters will still be limited to 1.6mm maximum cutting thickness in steel and 2mm in aluminium) With 1.8m of flexible connecting hose for use with the majority of hole cutters in this section Spring return operating lever has handgrip that may also be pumped by foot Can be used to power hand hole punches, using adaptors supplied Outlet port size 1/4in. BSP Cylinder hole 25mm diameter Supplied in 570mm long x 230mm wide x 150mm high storage/carrying box, total weight 14.5kg Pump has special draw bolt, washer and colour-coded adaptors to suit various hole cutter thread sizes Box incorporates partitioned area for storing smaller hole cutters Stock no. 605-223
Price per unit
OM
S$
1+
1610·00
S$
Size (mm)
Pilot Hole Size Bolt (mm) Size
20.0 22.5 25.0 27.5 30.0 35.0 76.2 116
12.5 13.5 13.5 13.5 13.5 13.5 20 27.5
M10 M12 M12 M12 M12 M12 M16 M24
Stock no.
Price per
OM
S$
600-098 600-105 600-111 600-127 600-133 600-149 600-076 600-082
unit unit unit unit unit unit unit unit
1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+
40·20 40·20 42·80 43·80 47·00 53·00 280·00 425·00
Punches - Square, Rectangular & Radius Square, Rectangular and Radius Hole Cutters
77
S$
Hand Punch Kit Hand Punch Kit
Square, rectangular and radius (rounded corner) hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg) except as marked * (in which case capacity is 18 swg/1.22mm mild steel) Long life punches with minimum burr, distortion or surface damage Easy to dismantle - slugs drop freely out of die Most punches can be used with the hydraulic pump/cylinder Stock no 605-223 or hydraulic hand punch kit Stock no 388-3628 up to 35mm/1 1⁄4 in diameter (See comparison table for exceptions). Not suitable for lever presses Ball race included
For punching holes in thin sheet steel, aluminium and brass up to 14 gauge (1.5mm) Tool develops up to 1 ton force 7 punches from 3⁄32 " to 9⁄32 " in 1⁄32 steps Supplied with die key & storage case Throat depth of 1 3/4in.
Stock no. 388-3628
Price per
OM
unit
S$
S$
S$
1+ 106·50
Hole Punches - Round Circular Hole Cutter Circular hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg). Long life punches. Minimum burr, distortion or surface damage. Easy to dismantle - slugs drop freely out of die. Most punches can be used with the hydraulic pump/cylinder or hydraulic hand punch kit up to 35mm/1 1⁄4 in diameter (see comparison table for exceptions). Not suitable for lever presses.
Size (mm) 12.5 14.5 16.5 20.0 22.5 25.0 27.5 30.0 35.0 40.0 50.0 60.0 70.0 Size (mm) 12.5 14.5 16.5 20.0 22.5 25.0 27.5 30.0 35.0 40.0 50.0
Pilot Hole Size (mm) 8 10 10 12.5 12.5 12.5 12.5 12.5 14.5 14.5 20 20 20 Stock no. 543-557 543-658 543-563 543-579 543-585 543-591 543-715 543-608 543-664 543-670 543-787
Bolt Size M8 M8 M8 M10 M10 M10 M10 M10 M12 M12 M16 M16 M16 Price per unit unit unit unit unit unit unit unit unit unit unit
Operation Hand Hand/Hydraulic Hand Hand/Hydraulic Hand Hand Hand/Hydraulic Hand/Hydraulic Hand Hand/Hydraulic Hand Hand/Hydraulic Hand/Hydraulic
Ball Race Supplied No No No No No No No No Yes Yes Yes Yes Yes
OM
S$
1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+
22·00 13·30 22·10 27·40 27·40 26·90 23·70 33·70 51·50 59·00 91·00
S$
Stock no. 543-557 543-658 543-563 543-579 543-585 543-591 543-715 543-608 543-664 543-670 543-787 543-793 543-800 S$
Shape Size (mm) 15.9 x 13.0 19.3 x 13.1 22.0 x 19.6 27.2 x 12.2 28.2 x 22.5 37.0 x 21.9 45.0 x 22.2 50.8 x 25.8 28.4 x 11.4 29.4 x 22.0 28.0 x 21.0 31.4 x 28.3
Rectangular Pilot Hole Size (mm) 10.5 10.5 15 10.5 15 15 17 16.5 10.5 15 15 17
Size (mm)
Stock no.
15.9 x 13.0 19.3 x 13.1 22.0 x 19.6 27.2 x 12.2 28.2 x 22.5 37.0 x 21.9 45.0 x 22.2 50.8 x 25.8 28.4 x 11.4 29.4 x 22.0 28.0 x 21.0 31.4 x 28.3
545-323 600-155 600-161 614-334 545-345 543-709 192-480 663-926 543-721 545-339 543-614 542-302
Price per unit unit unit unit unit unit unit unit unit unit unit unit
Bolt Size M8 M8 M10 M8* M10 M12 M12 M12 M10* M10 M10 M12
OM
S$
1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+ 1+
80·00 142·00 156·00 119·50 104·00 123·50 205·00 191·50 103·50 100·50 164·00 154·50
S$
Stock no. 545-323 600-155 600-161 614-334 545-345 543-709 192-480 663-926 543-721 545-339 543-614 542-302 S$
Hydraulic System Cutters Hole cutters for use specifically with the hydraulic pump/cylinder stock no. 605-223. Punches and dies designed to cut mild steel and aluminium up to 3mm (10 swg) thick. The larger hole cutters are particularly useful when panel mounting fans and DIN style equipment. Instructions included. Ball race included
Size (mm)
Pilot Hole Size Bolt (mm) Size
45 x 45 27.5 92 x 92 35.0
M16 M24
Stock no.
Price per
OM
S$
600-048 600-060
unit unit
1+ 1+
730·00 1330·00
Many more leading brands from over 2,500 suppliers available online
S$
S$
1899
www.nguyenxuong.com
ON-LINE www.rssingapore.com
Cutting & Machine Tools, Vices & Clamps Hole Punches - D Connector
Ball Race
D Connector Cutters
Cutter Ball Race May be mounted between the die and washer of many punches, significantly reducing the force required to cut larger holes Compatible with M8 and M10 size bolts Note: Some of our hole punches are supplied with a ball race already fitted. Size Thickness
35.9 mm 11.75 mm
Description Hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6 mm (16 swg) and aluminium up to 2mm (14 swg). Long life punches. Minimum burr, distortion or surface damage. Easy to dismantle - slugs drop freely out of die. Can be used with the hydraulic pump/cylinder Stock no 605223. Not suitable for the lever presses. Includes drilling jig for mounting holes Pilot hole 8mm M8 ball race supplied Note: Front mounting dimensions permit adequate clearance where ’harness through’ assembly of connector and wiring is required. Rear mounting dimensions are recommended for standard assembly. Description Mounting Mounting Hole Centres (mm) Size (mm) Stock no. 9-Way Rear 25 19.8 x 11.3 477-8690 9-Way Front 25 21.3 x 12.9 477-9328 15-way Rear 28.2 11.3 477-9340 15-Way Front 33.3 29.6 x 12.9 477-8707 25-Way Rear 47 41.9 x 11.3 477-8713 25-Way Front 47 43.4 x 12.9 477-8729
77
Description
Mounting
9-Way 9-Way 15-way 15-Way 25-Way 25-Way
Rear Front Rear Front Rear Front
Stock no. 477-8690 477-9328 477-9340 477-8707 477-8713 477-8729
Price per unit unit unit unit unit unit
OM
S$
1+ 1+ 1+ 1+ 1+ 1+
300·00 300·00 315·00 315·00 315·00 305·00
S$
www.rssingapore.com
1900
OM = Order Multiple
S$
Stock no.
M8 Ball Race M10 Ball Race
548-625 543-620
Price per unit unit
OM
S$
1+ 1+
11·30 13·10
S$
S$
Greenlee Hole Punches - D Connector Greenlee Hole Punches - D Connector High quality punches for D connector cut-outs Fast accurate panel punching Capacity up to 1.6mm mild steel Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no. 363-0632 use adaptor stock no. 478-0615 Mounting Mounting Hole Centres (mm) Description
Mounting
25-Way
Front
Front 47 Stock no. 477-8729
Price per unit
Size
OM
S$
1+
305·00
43.4 x 12.9 mm S$
S$
