Preview only show first 10 pages with watermark. For full document please download

Maddox Deck-mount Pot Filler Installation Instructions

   EMBED

Share

Transcript

MADDOX DECK-MOUNT POT FILLER INSTALLATION INSTRUCTIONS Before installing, read entire pot filler installation instructions. Observe all local building and safety codes. Unpack and inspect the product for any shipping damages. If you find damages, do not install. Contact Customer Service at 1-866-855-2284. If you need assistance or have questions while installing your pot filler, contact Customer Service. We recommend consulting a professional if you are unfamiliar with installing kitchen fixtures and plumbing. Signature Hardware accepts no liability for any damage to the floor, walls, plumbing or for personal injury during installation Faucet Body Braided Water Supply (cold) Braided Water Supply (hot) Mounting Nut Escutcheon Counter Top Check Valve Adapter Rubber Washer Locking Gasket INSTALLATION 1. Attach the mounting nuts to the faucet body and tighten. Locking Nut 2. Put the escutcheon on the faucet body. Hex Wrench 3. Place the rubber washer over the mounting hole in the counter top and pass the faucet body and supplies through the hole. 4. From beneath the sink thread the locking gasket, and locking nut onto the faucet body. 5. Connect the valve adapters to the water supply valves. Attach the braided water supplies to the check valve adapters. 6. When your faucet installation is complete, turn on the water supply. Check to make sure that all connections are tight (no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow the water to flow through the spout for approximately 60 seconds. Cartridge Switch Hot Water Cold Water 360° Rotation 360° Rotation Spout Faucet Body Spout Switch 16-3/4" max Maddox Deck-Mount Pot Filler Installation Instructions 1