Preview only show first 10 pages with watermark. For full document please download

Magenta Arm -up01 Platter Weight

   EMBED

Share

Transcript

TT 10 The TT10 is the first production turntable made by Margules, created as part of a project made by Margules and a Technologic university, where the students proposed a fresh and futuristic aesthetic design in a frame of high end requirements. The TT10 is belt driven and has a machined platter high mass platter siting in a boll bearing bushing. The motor is a synchronous low RPM low noise and torque in a suspended springs mounting to avoid noise induction to the turntable, the motor pivot is also ball bearing. The arm mounting is universal and can easily be adjusted for the Vertical Tracking and the Azimuth. The turntable is couple to its stand by mechanic Diodes that can be adjusted to perfect horizontality. The TT10 has RCA connectors to allow the user choose his preference cables. MAGENTA ARM -UP01 The UP-01 is a 9.5 inches, anodized aluminum machined uni-pivot arm, with internal antiresonance rings. The arm allows adjustment for, tracking error, azimuth and anti-skating and weight. www.margules.com Platter Weight: 5 kg Motor: SYNCHRONOUS MOTOR, 250RPM Weight: 8 Kg Dimentions (height, width, depth): 15cm, 52 cm, 41cm