Transcript
Around the cable Working under tension Standard program
GB
Main catalogue 2012
... convincing solutions
HAUPA – System supplier to specialist electrical wholesalers The foundations of the HAUPA Group were laid in 1961 in Remscheid, the centre of the German tool manufacturing industry. Hans-Udo Paas founded HAUPA with the aim of providing high quality tools for the requirements of the electrical trade. The effective combination of a respect for tradition and the use of efficient cutting edge methods were and are the basis for the consistent, stable expansion strategy of our enterprises. Subsidiaries and general importers throughout the whole of Europe ensure a wide-ranging network of distribution partners who are close to our customers and can guarantee a constant readiness to deliver. Innovative strength and functional competence in the cable and high voltage product lines as well as the experience of our team combined with the use of only the highest quality materials guarantee mature high quality products . . . to increase your productivity . . . to make you more competitive . . . for your lasting benefit
QR code: This catalogue contains QR codes which ensure more transparent communication of additional information via video or similar media content.
HAUPA-Group www.haupa.com
Q
DIN EN ISO 9001
ZERTIFIKAT
It is unwise to pay too much, but it is unwise to pay too little. When you pay too much, you lose a little money; that is all. When you pay too little you sometimes lose everything. Because the thing you bought was incapable of doing the thing you bought it to do. The common law of business balance prohibits paying a little and getting a lot. It cannot be done. If you deal with the lowest bidder, it is well to add something for the risk you run and if you do that, you will have enough to pay for something better. John Ruskin English social reformer 1819 – 1900
Quality HAUPA has been certified according to DIN EN ISO 9000 since 1996 (2003 DIN EN ISO 9001). In order to incorporate a true quality standard the quality management department of HAUPA decided at a very early stage to apply for ISO 9000 certification, which controls and covers the complete internal working and monitoring procedures. From goods receipt to dispatch – all working processes are carried out according to defined procedures. All HAUPA employees receive regular training in order to comply with these standards and to encourage them to actively suggest ways of improving the processes. Special, so-called QMB employees analyse modified structures and integrate these into the defined standards. Independent auditors carry out audits at regular intervals to ensure compliance.
DIN EN ISO 9001:2000 certificate
HAUPA Product Certification:
german
english
spanish
hungarian
netherlands
russian
1000 V IEC 60900:2004 GOST UL CSA VDE VPA Germanischer Lloyd DNV
polish
Contents page
page
5 - 14 16 - 22 24 - 58 60 - 78 80 - 110 112 - 116 117 - 124 126 - 134 136 - 138 139 - 143 144 - 145 145 - 146 147 - 149 150 - 151 152 - 156 157 160 - 170 172 - 176 177 - 178 180 - 184 184 - 185 186 186 - 188 190 - 191 194 - 198 200 - 203 206 206 - 207 208 210 - 211 211 - 212 214 - 223 226 - 232 233 - 234 234 - 235 235 - 236 238 - 241 Index 244
Around the cable
Cutting
...convincing solutions
External Ø of wires and cables (average) No. of wires Cross-section in mm2
External-Ø NYM mm
External-Ø NYY (ca.) mm
External-Ø NYCY (ca.) mm
External-Ø HO5RR-F (ca.) mm
External-Ø HO7RN-F (ca.) mm
2 2 2 2 2 2 2 2
x x x x x x x x
1,5 2,5 4 6 10 16 25 35
8,4 – 8,9 9,6 –11 11 –12,5 12 –13,5 15 –17 17 –20 21 –24 23,5 –27,5
11 13 14 15 17 19 23 –
12 13 15 16 17,5 20 – –
10,5 12,5 11 13 – – – –
11,5 13,5 12,5 14,5 16 20 25,5 29
3 3 3 3 3 3 3 3 3 3 3 3 3 3
x 1,5 x 2,5 x 4 x 6 x 10 x 16 x 25 x 35 x 35/16 x 50/25 x 70/35 x 95/50 x 120/70 x 150/70
8,8 –10,5 10 –11,5 11,5 –13 12 –15 16 –18 18,5 –22 22,5 –26 25 –29,5 – – – – – –
12 13 15 16 19 20 24 23 26 30 31 36 39 43
13 14 15 17 18,5 20,5 26,5 28 25 32 32 37 39 43
– – – – – – – – – – – – – –
– – – – – – – – – – – – – –
4 4 4 4 4 4 4 4 4 4 4 4
x 1,5 x 2,5 x 4 x 6 x 10 x 16 x 25 x 35 x 50 x 70 x 95 x 120
9,5 –11 11 –12,5 12,5 –14,5 14,5 –16,5 17 –19,5 20,5 –23,5 25 –28,5 27,5 –32 – – – –
13 14 16 17 19 22 27 26 35 40 45 50
14 15 16 18 20,5 24 29 31 34 37 42 47
12,5 14 – – – – – – – – – –
13,5 15,5 18 22 28 32 37 42 48 54 60 –
5 5 5 5 5 5 5 5
x x x x x x x x
9,9 –12 11,5 –13,5 14 –16,5 15,5 –18 18,5 –21,5 22,5 –26 27,5 –31,5 30,5 –35,5
13 14 16 18 21 24 – –
15 17 18 20 – – – –
13,5 15,5 – – – 35 – –
15 17 19 24 30 – – –
1,5 2,5 4 6 10 16 25 35
Cutting diameters of cable cutters Profi Line
Art. Ø
20 01 11 20 01 12 20 01 13 20 01 77 20 01 14 20 01 16 20 01 15 20 01 19 20 01 79 20 01 24 20 01 26 20 01 31 20 01 51 20 00 89 20 01 83 page 8 Cu/Al 185 mm2 34 mm Ø
page 8 Cu/Al 400 mm2 52 mm Ø
page 8 Cu/Al 240 mm2 35 mm Ø
page 8 Cu/Al 300 mm2 45 mm Ø
page 8 page 9 Cu/Al 400 mm2 52 mm Ø
page 9 Cu/Al 750 mm2 62 mm Ø
page 9 Cu/Al 1000 mm2 80 mm Ø
page 9 Cu/Al 1400 mm2 100 mm Ø
page 10 Cu/Al 120 mm2 25 mm Ø
page 10 Cu/Al 185 mm2 34 mm Ø
page 10 Cu/Al 240 mm2 35 mm Ø
page 10 Cu/Al 550 mm2 55 mm Ø
page 9 Cu/Al 185 mm2 32 mm Ø
page 9 Cu/Al 400 mm2 52 mm Ø
Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al 240 mm2 400 mm2 240 mm2 240 mm2 480 mm2 34 mm Ø 52 mm Ø 35 mm Ø 45 mm Ø 52 mm Ø
Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al 750 mm2 1000 mm2 1400 mm2 120 mm2 185 mm2 240 mm2 550 mm2 185 mm2 400 mm2 62 mm Ø 80 mm Ø 100 mm Ø 25 mm Ø 34 mm Ø 35 mm Ø 55 mm Ø 32 mm Ø 52 mm Ø
Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al 240 mm2 450 mm2 300 mm2 300 mm2 500 mm2 300 mm2 34 mm Ø 52 mm Ø 35 mm Ø 45 mm Ø 52 mm Ø 75 mm Ø
Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al 750 mm2 1000 mm2 1400 mm2 120 mm2 240 mm2 300 mm2 550 mm2 240 mm2 450 mm2 62 mm Ø 80 mm Ø 100 mm Ø 25 mm Ø 34 mm Ø 35 mm Ø 55 mm Ø 32 mm Ø 52 mm Ø
Cutting pistols
Cable cutters
Cutting pistol for PVC pipes
Allround soft-grip scissors
for PVC pipes and all materials made from plastics and rubber, exchangeable blade, knife made from tool steel hardened in oil, retractable by the press of a button. • little effort through special cutting • optimal transmission • effortless work through ergonomically shaped handle • incremental knife feed
The new allround Soft - Grip scissors with its relatively short blades and special handles are designed to fulfil the needs of the professional electrical installers. The impressive cutting performance and the tough construction make this new scissors a special tool. • ergonomic design (2 component) • slipping free handle - Soft - Grip • high cutting performance by low cutting force • precision toothing • cable stripping device • stainless
Art. no. 200214 200215
Ø 35 spare blades
kg 0,235 0,040
PU 1 1
Art. no. 200185
TL 150
Ø 50
kg 0,083
Cutting pistol for PVC pipes
Electricians‘ scissors
for PVC pipes and all materials made from plastics and rubber, exchangeable blade, knife made from tool steel hardened in oil, retractable by the press of a button. • little effort through special cutting geometry • optimal transmission • effortless work through ergonomically shaped handle • incremental knife feed
with wire cutter, bright nickel-plated, plain cutting edge, straight, strong insulation.
Ø 42 spare blades
kg 0,270 0,055
PU 1
• with stripping device • micro-toothing • stainless
Art. no. 200062
Art. no. 200216 200217
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
PU 1 1
TL 130
kg 0,096
PU 1
Electricians‘ scissors with wire cutter, bright nickel-plated, bent cutting edge, angled, strong isolation. • with stripping device • micro-toothing • stainless
Cable cutters Kevlar cutter
Art. no. 200064
to cut Kevlar fibre on optical fibre cables. Precision cut with cogs prevents the fibres from slipping and ensures a clean cut. • Micro-meshing • Riveted joint • Specially coated blade
TL 130
kg 0,094
PU 1
Electricians‘ scissors with long handle, blunted point, plain cutting edge, strong insulation, stripping device
Art. no. 200153
TL 160
kg 0,085
PU 1
Art. no. 200066
TL 130
kg 0,093
PU 1
Allround soft-grip scissors The new allround Soft - Grip scissors with its relatively short blades and special handles are designed to fulfil the needs of the professional electrical installers. The impressive cutting performance and the tough construction make this new scissors a special tool. • ergonomic design (2 component) • slipping free handle - Soft - Grip • high cutting performance by low cutting force • precision toothing • cable stripping device • stainless Art. no. 200155
TL 140
kg 0,086
PU 1
Combination scissors stainless special steel, shock-proof plastic handles, one cutting edge slightly serrated, for cutting of cable, thin plate, wire, leather, cardboard, plastic, Al, Ms and Cu foils. • Opening spring and locking blade • Jam protection • Adjustable screw joint Art. no. 200072
TL 190
kg 0,110
PU 1
... convincing solutions Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
5
Cable cutters Cable cutter
Cable cutter with spring joint
Cable cutter of carbon-steel, maximum cutting capacity due to special cuttinggeometry, suitable for multi-strand conductors
made of chrome vanadium, hardened, easier to use through joint spring, automatic release, locking device, for copper- and alu cable, not for solid lines
Art. no. 200105
TL 215
Ø 20
mm² 70
kg 0,281
PU 1 Art. no. 200086 200088
Cable cutter with a snap
TL 170 230
Ø 10 15
mm² 25 70
kg 0,266 0,475
PU 1 1
The little brother working exactly as forceful and precise as 201000 for fine wired cable up to 16,9 mm diameter (70 mm²)
Cable cutter Cable cutter made of chrome vanadium steel, enormous cutting performance, reduced strain, ergonomic handle, additional stripping function in the front section, through a 180° flashover of the shank you can use the tool as a cable stripping knife. Application: for copper- and aluminium cable, not for solid lines Art. no. 201002
TL 180
Ø 16,9
mm² 70
kg 0,241
PU 1
Cable cutter with a snap The new cable-shears of HAUPA cuts cables in a non-compromising and forceful manner almost without effort and in a single-hand-operation. A patented twinstage adjustment mechanism brings the handles of the tool to a position that is perfect for the development of the full force of the hand even while the cutting jaws are wide open. By this means, even cables with large crosssections can be cut in a forceful and fast manner with a single hand without unduly excess labour. • Laser-cut components made of special carbon steel, oil-hardened • CNC-ground cutting type, induction hardened for maximum cutting performance • Screwed joint connections, re-adjustable for longer durability as well as • an elegant and ergonomic design for optimal handling • for telephone cable up to 26.1 mm diameter (120 mm²) • for fine wired cable up to 18.9 mm diameter (120 mm²)
Art. no. 201086 201088
TL 230
Ø 18,9
mm² 120
kg 0,514
Ø 10 18
mm² 25 70
kg 0,216 0,361
PU 1 1
Cable cutter for copper and aluminium cable; steel-tube handles, PCV-covered, single and multi-strand, hardened blade with precision handle for smooth and clean cut without crimping, little effort due to beneficial transmission and cutting geometry, low weight
Art. no. 200087
Art. no. 201000
TL 180 240
PU 1
Cable cutter
TL 500
Ø 27
mm² 150
kg 1,026
PU 1
Cable cutter Cable cutter for copper and aluminium cable up to max. 20 mm Ø, cutting performance approx. 125 mm², (Cu-Al), anti-rust cutter made from quenched and drawn Cr-V steel, crescent-shaped, rounded cutting for a safe and precise cut, impact-resistant, coated, hardened handles, extremely stable and light
Cable cutter made of chrome vanadium steel, enormous cutting performance, reduced strain, ergonomic handle, additional stripping function in the front section, through a 180° flashover of the shank you can use the tool as a cable stripping knife. Application: for copper- and aluminium cable, not for solid lines
Art. no. 201085 201087
6
kg Size TL Ø
TL 160 200
Ø 10 10
Weight in kg Size in mm Total length Cross-section mm
mm² 25 70
mm² I/no. Length BL
kg 0,177 0,289
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
PU 1 1
Art. no. TL 200073 300 200073/MK 200095 530 200095/MK 200099 780 200099/MK
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Ø 20 35 50
mm² 120 cutting head 185 cutting head 400 cutting head
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
kg 0,620 0,190 1,652 0,610 3,380 1,202
Aluminium Cutting length Packing unit/piece
PU 1 1 1 1 1 1
Cable cutters
Cable cutters
Cable cutter
Wire cutter
with leverage construction, blades of alloyed special steel, forged, replaceable, squeeze-free cutting, deformation of cable impossible. Working range: for Copper- and Alu-cable 24 mm Ø, cross-section 120 mm²
• Cu and Al cables 10 mm² • ACSR Ø 6 mm • solid Ø 4 mm • also suitable for cable and round steel • suitable for separating open wires with pull relief wire • with opening spring and latch • special cutting geometry prevents the wire from unsplicing
Art. no. 200076 200102
TL 600
Ø 24
mm² 120 cutting head
kg 0,940 0,349
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
PU 1 1 Art. no. 200173
TL 180
Ø 6
mm² 10
kg 0,306
PU 1
kg 0,752
PU 1
kg 2,390
PU 1
Cable cutters “Super light” Cable cutters for Al and Cu cables with lever transmission. Very light due to handles made from aluminium tube, cutter made from alloyed special steel, forged exchangeable cutting head, little effort necessary, high cutting performance, absolutely crimp-free cutting
Art. no. 200197
TL 700
Ø 24
mm² 120
kg 1,839
Wire cutter • Cu and Al cable 95 mm² • ACSR Ø 10 mm • solid Ø 6 mm • also suitable for cables and round bars • special cutting geometry prevents the wire from unsplicing • suitable for separating open wires with pull relief wire • exchangeable milling head
PU 1
Cable cutter with leverage construction, blades of alloyed special steel, forged, replaceable, squeeze-free cutting, deformation of cable impossible. Working range: for Copper- and Alu-cable 40 mm Ø, cross-section 400 mm²
Art. no. 200175
TL 180
Ø 10
mm² 95
Wire cutter
Art. no. 200100 200104
TL 980
Ø 40
mm² 400 cutting head
kg 3,920 0,606
PU 1 1
• Cu and Al cable 150 mm² • ACSR Ø 14 mm • solid Ø 9 mm • also suitable for cables and round bars • special cutting geometry prevents the wire from unsplicing • suitable for separating open wires with pull relief wire • angled cutting tip allows you to cut individual cables • optimal transmission for excellent cutting performance • exchangeable milling head
Bolt cutter • Cuts both soft and hard wires, piano wire • Cuts bolts, nails, rivets etc. Up to Ø 3.6 mm • Particularly high cutting performance with low force application thanks to extremely effective jointed construction • Blades are also inductively hardened, blade hardness of around 64 HRC • Chrome vanadium high-performance steel, forged, oil-hardened
Art. no. 200170
TL 200
Ø 3,6
kg 0,111
Art. no. 200181
TL 700
Ø 14
mm² 150
PU 1
... convincing solutions Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
7
Cable cutters with eccentric drive
INFO Cable cutters
Cable cutter Particularly smooth-running cable cutter with needle bearing eccentric drive for everyday use up to 35 mm Ø. Extremely durable tool
Benefits: • Cutting without crushing • Small and large cable cross-sections can be handled without need for strength • Mature technology • Pin-mounted engine components • Special cutting geometry • Optimised eccentric drive • Permanently forged cogs • High lifetimes • Low maintenance requirements
Art. No. 200113 Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
Cutting range:
Cable cutter Handy one-hand device with smooth-running and robust drive technology for everyday use up to 34 mm Ø, all moveable parts made from hardened steel
240 240 300
35 35 35 35
Length: Weight:
250 0,976
Cable cutter Particularly smooth-running cable cutter with needle bearing eccentric drive for everyday use up to 45 mm Ø. Extremely durable tool
Art. No. 200111 Cutting range:
Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
185 240 240
34 34 34 34
Length: Weight:
250 0,790
Art. No. 200177 Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
Cutting range:
Cable cutter Handy one- and two-hand tool with smooth-running and robust drive technology for everyday use up to 52 mm Ø, all moving parts made from hardened steel
300 240 300
45 45 45 45
Length: Weight:
260 0,900
Cable cutter Particularly smooth-running cable cutter with needle bearing eccentric drive for everyday use up to 52 mm Ø. Extremely durable tool
Art. No. 200112 Cutting range:
Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
400 400 450
52 52 52 52
Length: Weight:
320 1,122
Art. No. 200114 Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
Cutting range:
400 480 500
52
Length: Weight:
8
kg Size TL Ø
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
52 52 52 325 1,340
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
Cable cutters with eccentric drive
Special cable cutters
Cable cutter
Special cable cutter
Almost maintenance-free two-hand cable cutter up to 62 mm Ø, smooth-running through needle-bearing eccentric drive, great range of application, comes with cog comb to clean cogs (s. art. 20 01 19)
for data and telephone cables up to 75 mm Ø, high cutting quality through special cutting geometry, smooth-running due to needle-bearing drive mechanics, not suitable for steel wire and very wiry conductors of power supply (EVU etc.)
Art. No. 200116
Art. No. 200115 Cutting range:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
750 750 750
62 62 62 62
Length: Weight:
410 2,224
Cutting range:
Cu wire fine wiring Cu wire fine wiring or telecommunication cable
300
75 75
Length: Weight:
370 1,585
Ratchet cable cutters
Cable cutter
Hand cable cutter
Almost maintenance-free quality tool up to 80 mm Ø. Smooth-running due to needle-bearing eccentric drive, also suitable for cables with steel plate jacket and soft steel wire reinforcement, ST 52. Comes with cog comb to clean cogs, integrated in the handle
ratchet action type, with spare blade, for copper and alu cable to 32 mm Ø
Art. No. 200089 Cutting range:
Art. No. 200119 Cutting range:
Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
1000 1000 1000
80 80 80
Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
185 185 240
32 32 32 32
Length: Weight:
230 0,615
80
Length: Weight:
610 3,322
Hand cable cutter ratchet action type, with spare blade, for copper and alu cable to 52 mm Ø
Cable cutter Almost maintenance-free quality tool up to 100 mm Ø. Smooth-running due to needle-bearing eccentric drive, also suitable for cables with steel plate jacket and soft steel wire reinforcement, ST 52. Comes with cog comb to clean cogs, integrated in the handle
Art. No. 200183 Cutting range:
Art. No. 200179 Cutting range:
Length: Weight:
Length: Weight: Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
1400 1400 1400
Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
400 400 450
52 52 52 52 280 0,914
100 100 100 100 610 3
... convincing solutions Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
9
Ratchet cable cutters
Front cable cutters
Special cable cutter
Front cable cutter
Cable cutter with exchangeable cutting segments, cuts copper and aluminium cables up to 50 mm Ø without crimping. The highly efficient eccentric transformation ensures ideal cutting geometry. The one-hand universal cable cutter has a patented structure with exchangeable cutting segment. This provides new opportunities, because specific cutting requirements can be combined with optimal material/form adjustment. All shapes of steel covered/steel armoured ropes, cables and hoses can be separated using this tool. In the case of wear or changing requirements, only the cutting segment need to be replaced. The new 12/14 mm wide drive mechanism is suitable for the highest demands. The level has a double needle bearing. Includes cog cleaner for cleaning cogs.
for Copper and Alu-cable 25 mm Ø, squeeze-free cutting, optimized levertransmission
Complete set: • Universal cable cutter • 1 pair of cutting segments S1 (Art. 200178/S1) • Cleaner • Length: 230 • Weight: 1,140
Art. No. 200124 Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
Cutting range:
120 120 120
25 25 25 25
Length: Weight:
245 1,020
Front cable cutter for Copper and Alu-cable 34 mm Ø, squeeze-free cutting, optimized lever-transmission by eccentric drive system
Art. No. 200126
Art. No. 200178
Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
Cutting range:
Cutting range:
Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
300 240 240
50 50 50 50
Length: Weight:
230 1,140
185 240 240
34 34 34 34
Length: Weight:
330 1,541
Front cable cutter Art. No. 20 01 78 Universal cutting segment S1 Art. No. use profile 20 01 78/S1 AL/CU 300 mm2 flexible steel cables 95 mm2 Niro cables ACSR DIN 48 204 150/25 mm2 steel armoured hose
diameter structure g 50 mm 100 14 mm 8 mm 19/1 20 mm 7/2.1 mm 50 mm
very easy-to-use precision one and two-hand cutter, excellent crush-free cutting quality, even with fine wires, reliable and virtually wear-free eccentric operation, revolving cutter can be unlocked in any position, cutting range to Ø 35 mm
PU 1 pair
Can lead to crimping of steel cables are highly flexible, slightly edgy cut-away section, increased handgrip
Further accessories for cable cutter item no. 20 01 78 Art. No. 20 01 78/B
use AL/CU flexible steel cables Catenary wire ACSR DIN 48 204
profile 150 mm2 70 mm2 70/300 mm2 70/12 mm2
20 01 78/C
AL/CU 350 mm2
20 01 78/S
AL/CU 350 mm2 flexible steel cables 95 mm2 cable with soft steel casing 240 mm2
diameter structure 30 mm 12 mm 12/30 mm type 8 11.7 mm 7/1.44 mm
g 100
100
AL/CU 200 mm2
50 mm
100
240 240 300
35 35 35 35
Length: Weight:
330 1,673
1 pair
Clean cut and normal handgrip 20 01 78/S2
Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
Cutting range:
PU 1 pair
50 mm 100 1 pair Clean cut and low handgrip with large cross sections, suitable for highly flexible conductors; not for steel 50 mm 16 mm 50 mm
Art. No. 200131
1 pair
flexible steel cables 95 mm2 14 mm Niro cables 8 mm 19/1 ACSR DIN 48 204 300/50 mm2 24.5 mm 7/3 mm Steel armoured hose 50 mm construction steel 235JR+AR 10 mm solid mat. screws 8 mm 8.8 Can lead to crimping of steel cables are highly flexible, slightly edgy cut-away section, increased handgrip
Front cable cutter Easy-to-use two-hand front cable cutter with patented eccentric operation, excellent crush-free cutting quality even with larger cross sections, revolving cutter can be unlocked in any position, cutting range to Ø 55 mm
Art. No. 200151 Cu/Al wire multi wiring Cu/Al wire sector format Cu wire fine wiring Cu wire fine wiring or telecommunication cable
Cutting range:
550 550 550
55
Length: Weight:
10
kg Size TL Ø
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
55 55 55 485 3,493
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
Around the cable
Hydraulic cutting
...convincing solutions
Hydraulic cable cutters
Hydraulic cable cutters
Hydraulic cable cutter
Hydraulic safety life line cable cutter
Cutting head 180° rotatable, in the case, for copper and aluminium cables
used for working under voltage acc. to VDE 0105, part 100. Consisting of: • Hydraulic shear with high pressure hose of 10 m, with leak-free coupling system and earth harness acc. to EN 50340 • Double piston pump mounted on foot-pedal, with foot-operated switch • Transport case
Art. no. 216402 216404
TL 580 690
Ø 40 85
kg 5,300 7
PU 1 1
kg 11,300 14,600
PU 1 1
kg 11,300
PU 1
Hydraulic cutting headstocks Hydraulic cutting headstock for copper or aluminium cables diameter
Art. no. 216408 216410
Ø 85 120
• Fully operational and filled with special oil According to VDE 0105 Part 1 Para. 9.6.4 the cable cutter 216416 is used for cutting low and medium voltage cables up to 60 KV AC. It has been tested by the Professional Association of Precision Mechanics and Electro-Technology based on-testing GS ET-23 and has been awarded the GS-seal of approval. If a live wire is cut by accident, the operator is not in any danger. The 10 m long high pressure hydraulic hose, which connects the pump to the cutting head, guarantees the highest standard of safety due to it special insulating features. The cutting process is controlled by watching the manometer attached to the pump, since, in general, the cutting head con not be seen when a cable is cut. This process has been tested repeatedly at medium voltage, with live wires and continuing main supply. The cutting range goes up to 90 mm. The 12 mm cutting blades are made of high yield point steel and are polished, thus wear- and tear- resistant, A strongly dimensioned guidance of the blades guarantees a high degree of mechanical stability. Even in the event of a short circuit, a safe cutting of the wires is guaranteed, since the individual blades overlap by approx. 20 mm. The blades open themselves when pressure is reduced. The high pressure hose bursts at 2700 bar. The pressure relief safety system of the pump has been adjusted at a 625 bar level.
Hydraulic cutting headstock for copper or aluminium cables diameter, max. 95 mm
Art. no. 216415
Ø 95
Art. no. 216417 216416 216416/850
Ø 85 120 120
kg 12 12 12
PU 1 1 1
kg 12
PU 1
Hydraulic safety life line cable cutter
Art. no. 216421
12
kg Size TL Ø
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
Ø 95
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
Battery powered cable cutters Battery powered wire cutter „AS6ST-20“
Battery powered cable cutter „AS6-32“
2 stage hydraulics for cutting telecommunications cables, cutting head can be rotated by 180°, manual return after the cut has been completed. Scope of delivery: 1 crimping tool, 1 quick charger, 2 batteries, 1 carry strap loop, in plastic case. • Pressing force kN: 60 kN • Working pressure in bar: 700 • Cutting width Ø: 20 • Battery charging time in minutes: 60 • Battery type: NiMH, 14.4 V, 3 Ah • ACSR
Cutting head can be rotated by 180°, manual return, for copper, aluminium cable. Scope of delivery: 1 crimping tool 1 quick charger 2 batteries 1 carry strap loop in plastic case
Art. no. 216418
Ø 20
kg 8,100
PU 1
Battery powered wire cutter „AS6S-32“ 2 stage hydraulics for cutting telecommunications cables, cutting head can be rotated by 180°, manual return after the cut has been completed. Scope of delivery: 1 crimping tool, 1 quick charger, 2 batteries, 1 carry strap loop, in plastic case. • Pressing force kN: 60 kN • Working pressure in bar: 700 • Cutting width Ø: 32 • Battery charging time in minutes: 60 • Battery type: NiMH, 14.4 V, 3 Ah
Art. no. 216419
Ø 32
kg 8,100
PU 1
Battery powered wire cutter „AS6-40“ Cutting head can be rotated by 180°, manual return, for copper, aluminium cable and steel rope. Scope of delivery: 1 crimping tool 1 quick charger 2 batteries 1 carry strap loop in plastic case
TL 385
Ø 40
kg 8,100
PU 1
Battery powered cable cutter „AS12-52“ Cutting head can be rotated by 180°, manual return, for copper, aluminium cable. Scope of delivery: 1 crimping tool 1 quick charger 2 batteries 1 carry strap loop in plastic case • Pressing force kN: 120 • Working pressure in bar: 700 • Cutting width Ø: 52 • ACSR • Battery charging time in minutes: 60 • Battery type: NiMH, 14.4 V, 3 Ah
Art. no. 216424
TL 385
Ø 52
Art. no. 216426
TL 385
Ø 32
kg 8,100
PU 1
Battery powered cable cutter „AS6-85“ Cutting head can be rotated by 180°, manual return, for copper and aluminium cable, telephon cable. Scope of delivery: 1 crimping tool 1 quick charger 2 batteries 1 carry strap loop in plastic case • Pressing force kN: 60 • Working pressure in bar: 700 • Cutting width Ø: 85 • Battery charging time in minutes: 60 • Battery type: NiMH, 14.4 V, 3 Ah • TL in mm: 385 • Weight of set in kg: 9,0 Art. no. 216428
TL 385
Ø 85
kg 9,000
PU 1
Battery powered cable cutter „SAS6-85“ Cutting head can be rotated by 180°, manual return, for copper and aluminium cable as well as armoured steel cable, telephon cable. Scope of delivery: 1 crimping tool 1 quick charger 2 batteries 1 carry strap loop in plastic bag
• Pressing force kN: 60 kN • Working pressure in bar: 700 • Cutting width Ø: 40 • Battery charging time in minutes: 60 • Battery type: NiMH, 14.4 V, 3 Ah
Art. no. 216422
• Pressing force kN: 60 • Working pressure in bar: 700 • Cutting width Ø: 52 • Battery charging time in minutes: 60 • Battery type: NiMH, 14.4 V, 3 Ah
• Pressing force kN: 60 • Working pressure in bar: 700 • Cutting width Ø: 85 • Armoured steel cable • Battery charging time in minutes: 60 • Battery type: NiMH, 14.4 V, 3 Ah
Art. no. 216430 kg 8,500
Ø 85
kg 9,000
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
13
Battery hydraulic cutting tools
Art: Type:
216418 AS6ST-20
216419 AS6S-32
216426 AS6-32
Art: Type:
---
Art: Type: Diameter Head Output force Immediately motor-stop
--20
--32
--32
swivel
open
6
6,5
20 20 -- 16 20 20 20 20 (under SS41) 13 mm 20 20
32 28 --------------
216422 AS6-40
216424 AS12-52
216428 AS6-85
216430 SAS6-85
---
---
---
---
216404 HS-85
---
---
--40
--52
--85
216408 KS-85 85
216415 KS-95 95
216410 KS120 120
open
swivel
swivel
swivel
swivel
open
swivel
6,5
6
12
6
700 bar
700 bar
700 - 850 bar
40 40 40 40 - 22 25 25 -20 25 16 -40
52 52 52 -32 22 25 25 15 20 25 52 52
46 28 50 85 ----------85
85 85 85 85 ---------85 85
95 95 95 95 - 22 25 25 15 20 -95 95
120 120 120 120 - 22 25 25 15 20 -120 120
Hand hydraulic cutting tools ---
---
216402 HS-40
Hydraulic cutting heads
Material Copper Aluminium Undergroundcable Telephone cable ACSR Wire rope
Guy wire
Soft steel bar Sheetmetal & Wire armouring, CU Lead sheated cable
32 28 --------------
Around the cable
Stripping
...convincing solutions
Cable strippers
INFO Cable strippers
Cable Sheath Stripper A combination tool for all standard cross-sections in the medium-high voltage range for VPE single-core cables.. Cutting and stripping the exterior sleeve and the inner cable insulation. Two feeds and a zero setting can be set to ensure precise stripping. The sleeve is lifted at the cutting point and this prevents damage to the construction elements below.
How to use: • For removing the exterior protective sleeve • Junctions and distribution boxes • For lengthwise and circular cuts • Round PVC cable/wet room cable/ribbon and flat cable • Power lines/telecommunication lines, system data cables • Co-axial and bell round cable/fibre optics cable • Short-circuit proof lines/photovoltaic systems
Stripping pliers For cutting and removing the cable sheathing of low voltage cables Art. no. 200524
mm² 35-500
kg 0,800
PU 1
Ø 40 60
kg 0,100 0,100
PU 1 1
kg 0,800
PU 1
Border cutter Art. no. 200187 200188
TL 260 290
Ø 26-52 47-75
kg 0,760 1,100
PU 1 1
Stripping tool for medium-high voltage cable A universal tool for controlled and safe stripping of the firm extruded exterior semi-conductor layer of medium-high voltage cable with 10--30 KV and for greater voltage levels. Working range 10-50 mm.
Art. no. 200526 200528
• Stripping depth can be set • Defined round cut • Automatic work feed
Complete assembly case Contents: • Sleeve cutter • Plastic prism • Stripping device • Silicone paste • Border cutter • Key for changing blades
Art. no. 200520
Ø 10-50
kg 0,800
PU 1
Art. no. 200522
16
kg Size TL Ø
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
mm² 35-500
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
Cable strippers Cable stripper “Kabifix“
Stripper standard
for lenghtwise and circular cutting, for sheath splitting and stripping of the following kinds of cable: NYY - 4 - 16 mm² - NYM - 5 - 16 mm², coaxial cables and round bell wire, also for cutting of Isoflex and PCV tubes with diameters up to 25 mm Ø
for damproom cable (NYM) 3 x 1.5 - 5 x 2.5 mm², 8 - 13 mm outside-Ø
Art. no. 200022 200024
Ø 6-28 spare blades
kg 0,096 0,010
PU 1 1
Art. no. 200036
Ø 8-13
kg 0,065
PU 1
Universal stripper radial cutting and stripping (up to 20 cm) in one go, practical stripping-off conductors 0.2 - 4.0 mm², with insulation device for conductor and strand from 0.2 - 0.3 - 0.8 mm Ø and 1.5 - 2.5 - 4.0 mm²
Cable stripper “Kabifix LWL” for optic fibre from 6 - 25 mm², for round and longitudinal cuts, inner adjusting screw for setting the cutting depth, replaceable blade, handy ergonomic format
Art. no. 200043 Art. no. 200023 200023/M
Ø 6-25 6-25
kg 0,136 spare blades 0,003
PU 1 1
Ø 0,2-4,0
kg 0,063
PU 1
Flatcable stripper for fast and precise stripping of flat and oval cable, with stripping device for single wires 0,8 - 1,5 - 2,5 mm²
Cable stripping knive with hook blade for stripping of all kinds of commonly used cable, for splitting sheath and stripping conductors, with automatic change of cutting operation from lengthwise to circular cutting, with slipping free 2 component handle Art. no. 200037
Ø 0,8-2,5
kg 0,068
PU 1
kg 0,039
PU 1
kg 0,041
PU 1
Stripper “Coaxi“ Art. no. 200031 200046
Ø 8-28 spare blades
kg 0,100 0,004
PU 1 1
for coaxial cable, 1 end for outside, 1 end for inside insulation
Cable stripping knive for splitting sheath and stripping conductors, with automatic change of cutting operation from lengthwise to circular cutting, with slipping free 2 component handle
Art. no. 200035
Ø 4,8-7,5
Stripper for coaxial cable Art. no. 200038 200040 200042 200044 200046
Ø 4-16 8-28 28-35 35-50 spare blades
kg 0,090 0,091 0,101 0,108 0,004
PU 1 1 1 1 1
for coaxial cable, 1 end for outside, 1 end for inside insulation
Art. no. 200636
Ø 4,8-7,5
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
17
Cable strippers for short-circuit proof lines
No.1-Cat HAUPA No.1-Cat is a wire stripping tool for PVC insulated data cables (twistedpair cable) with a diameter of 4.5 to10 mm. It is not necessary to set the cutting depth to the relevant diameter since the special blade position strips the insulation perfectly and then scratches and then the foil screen can be scratched and removed. The stripping blades are coated with titanium nitride.
Special cable stripper to remove insulation/sheath in short-circuit proof lines (NSFGAFÖU). For the first time the integrated stopper and the optimised properties and design of the cutter allow safe and simple cable stripping of difficult insulation – saves time without damaging the wire
Art. no. 200630 200632 200634
Ø 1,5 2,5-6 10-16
kg 0,054 0,054 0,054
PU 1 1 1
Technical data for No. 1-Cat Round cables: Data cables 4.5 to 10 mm in diameter Weight: 22 g Length: 100 mm TÜV/GS tested Art. no. 200638
TL 100
Ø 4,5-10
kg 0,050
PU 1
Stripper for UTP-/STP-data cable PC-Strip
Universal tool for cutting and stripping- off of radial- and flat- cable, shielded and unshielded cables, adjustable cutting depth. Interchangable blades, for cable from 3.5 to 9 mm Ø
specially constructed for stripping-off computer- and control-cable Strippingoff: 5.5 - 15.0 mm Ø, cover of PCV-insulated cable Stripping-off: insulation of conductors with 6 - 26 AWG/4.0 - 0.22 mm². Suitable for computer- and control cable, telecom cable, system datacable as well as others
Art. no. 200039
Ø 5,5-15
kg 0,064
PU 1
Ø 3,5-9
kg 0,060
PU 1
Precision stripper PWS Plus
Stripper for coaxial cable
Areas of application: Data processing equipment, control device production, telecommunication, 3 integrated functions: • precise stripping from AWG 30 (0.25 mm² Ø) to AWG 20 (0.8 mm² Ø) • adjustable straight dog up to 15 mm • wire cutter up to 0.8 mm Ø (CU cable)
for coaxial cable, RG-58, RG-59/62, RG-6 and 6QS, with 3 interchangeable and adjustable knives, cut-distance 8 and 4 mm
Art. no. 200069
Art. no. 200068
Koax RG-58, -59, -62, -6, 6QS
crimp kg RG 58-59-62-6 0,048
PU 1 Art. no. 200033
Optical fibre stripper
Ø 0,25-0,8
kg 0,039
Universal tool, optical fibre cable stripper, 2, 8, 5.0 and 8.0 mm, precision cutter for the actual glass fibre, inner insulation stripper 0.254 mm and 0.32 mm
Precision stripper for optic fibres
Art. no. 200067
Art. no. 200622
Ø 2,8-8
kg 0,054
PU 1
PU 1
Light and handy precision stripping tool to remove the sleeve from optic fibres (wires) in the application areas of electronics and telecommunication, for 0.18 mm Ø
Ø 0,18
kg 0,029
PU 1
Sensor Tool LSA PC Cat
Standard tool for all data, information and telecommunication cabling with cutting device, hook and blade. Wire Ø: 0.35 – 0.9 mm Strands Ø: 0.7 – 2.6 mm
The PC–CAT is an insulation tool for PVC – insulated data communications and control cables, for example, CAT 5, CAT 6, CAT 7, cables or twisted-pair cables
Art. no. 300322 Art. no. 200637
18
kg Size TL Ø
TL 125
Ø 4,5-10
Weight in kg Size in mm Total length Cross-section mm
kg 0,062
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Ø 0,35 - 0,9
kg 0,078
PU 1
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
PU 1
Wire stripper
INFO Wire stripper
Cable stripper, automatic no wire damage, even fine wires are stripped according to standard, replaceable blade made from special steel, robust metal body, a pressure spring returns the pliers to their original position, suitable for fibre optics, rubber and silicon insulated cables
Stripping is the removal the insulation on an electrical cable (wire). The following stripping pliers are used to do this: Manually adjustable stripping pliers Are set by hand to the stripping diameter by eye. The risk of damaging the cable is thus very high. Automatic or self-adjusting stripping pliers For fast and precise cutting and stripping. These tools automatically adjust to the required cable cross-section or insulation thickness. Thus it is not possible to damage the cable or the insulation. A lengthwise stop makes serial insulation easier. Micro-precision stripping tools These are used when fine wires are to be stripped. Data technology, network technology, controller construction, telecommunications, electronics, model construction. Stripping tools for special insulation types Teflon insulations are a rubber-like insulation type which make removing the insulation of an electrical cable more difficult. In such tough situations we recommend stripping tools that cut the insulation sleeve.
Art. no. 210691 210692
TL 165 165
mm² 0,5-2 1-4
kg 0,340 0,350
PU 1 1
Wire stripper „High Strip“ suitable for all common stranded and solid conductors from 0.5 - 0.75 - 1.5 - 2.5 - 4 mm², for conductors with hard to strip insulations such as rubber, silicon, PCV, THHN, TWHN, PMMA and lighting wave conductor with PE-cover
Advantages • Constant safe stripping results • Fault free processing • Precision in every cut • Serial stripping is made easier by lengthwise stop • Automatic stripping pliers = 3 in 1 = cut + remove sleeve + strip
Cable stripper, manual for copper cables, comfortable handles, multi-function tool incl. Cable cutter, precise stripping due to formed blades Art. no. 210684
TL 170
mm² 0,5-4
kg 0,130
PU 1
Super wire stripper Art. no. 210620 210624
TL 175 175
mm² 0,5-2,5 0,25-0,75
kg 0,158 0,161
PU 1 1
Automatic adjustment for conductor diameter, working range: 0,5 - 4 mm², cutting capacity to 2,0 mm²
Cable stripper, manual optical fibre Cable stripper for glass fibre cable, adjustable cutting depth, multi-function tool, especially for stripping and cutting wires, especially suitable for cutting back optical fibre (outer jacket and buffer), with handle lock
Art. no. 210683 Art. no. 200057
TL 150
mm² 0,18
kg 0,120
TL 170
mm² 0,5-4
kg 0,119
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
19
Wire strippers Automatic wire stripper Super Plus
Automatic wire stripper HAUPA-Special
for solid and flexible conductors and strands between 0.2 and 6.0 mm² (AWG 24 - 10)
for fast and precise stripping - even in areas difficult to access. For 0.50 to 6 mm² copper wires, easy handling because conductors can be inserted laterally, setting to cross-section not required, integrated side-cutting pliers for copper wires with 2.8 mm maximum diameter, adjustable straight dog Areas of application: Electrotechnics industry, electrical engineering, automotive industry
• For fast and precise stripping even of difficult – to-access places • No adjustment to wire cross section necessary • Suitable for cables with insulation made from PVC and other materials • Special scanning system, therefore no damage to conductors • Adjustable longitudinal stop from 6.0 to 15.0 mm for even serial stripping • External side cutters for conductors up to 2.5 mm² • Body of pliers made from fibre-glass reinforced polyamide • Handle of pliers with elongated hole at the bottom for mounting • TÜV / GS tested
Art. no. 210681
TL 170
mm² 0,5-6
kg 0,179
PU 1
Wire stripper / Solar for wires up to 6 - 16 mm², automatic adjustment to the cross section Art. no. 210695 210695/E
TL 170
mm² 0,2-6 spare blades
kg 0,088 0,010
PU 1 1
Automatic wire stripper Ergonomically designed, automatic wire stripper with a specially developed sensing system making adjustment to the individual cable cross-section unnecessary. The sensing system means that that it is absolutely impossible to damage wires, conductors or outer insulation. The stripper is suitable for single- and multi-wire cables and fine-wire cables from 0.2 to 6 mm². The slender form of the stripper head is ideal for use in areas which are difficult to access. One of the most striking characteristics of these stripper is the fact that very little force is needed to operate them. The stripper blades adapt automatically to different cable cross-sections and therefore ensure that individual strands and wires are not damaged. A further feature is the integrated diagonal cutters with the wire up to max. 2.5 mm² (Cu and Al conductors.) The variable length stop from 6 to 18 mm makes work easier in longer processing runs. The coloured soft plastic zone in the handle offers non-slip grip and makes the work fatigue-free. TÜV / GS tested stripping tool.
Art. no. 210685
20
kg Size TL Ø
TL 180
mm² 0,2-6 spare blades
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
kg 0,151 0,030
CW RJ RG CSS
mm² 6-16
kg 0,147
PU 1
Flat cable pliers automatic insulation tool for PCV- insulated flat cable up to max. 12 mm, width suitable for flat cable up to 2.50 mm², automatic adjustment to the cross section
Art. no. 210686
Art. no. 210696 210696/2
TL 160
TL 160
mm² 0,75-2,5
kg 0,148
PU 1 1
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
PU 1
Wire strippers Wire strippers, sensor special
Automatic cable stripper
Automatic wire strippers for stripping combination wires for connecting sensor actuators, distribution boxes/bus couplings. • Any length can be stripped • No need to make setting to the cable cross-section • Blades can be replaced • TÜV/GS tested • Dimensions approximately (LxWxH in cm): 16.6 x 10.2 x 2.8
for stripping of fine-wiring and solid conductors with PCV-insulation as well as 4-6-8 pole telephone- or computer cables, automatic adjustment to the cross section, cutting capacity up to 6 mm²
Application: For stripping halogen-free screened or unscreened sensor/actuator cables with a PUR or PVC exterior sleeve and a 3-to-8 cable core structure, for example, sensor cable 3 x 0.34 mm² unscreened to 8 x 0.25 mm² screened, for uses in trade and industry.
Art. no. 210690
TL 200
mm² 0,03-6
kg 0,184
PU 1
Automatic cable stripper to strip fine wires and solid wires with PCV insulation 0.08 - 2.5 mm², the maximum adjustable stripping length is 15 mm, automatic adjustment to the cross section, cutting capacity up to 6 mm² Art. no. 210729
TL 180
Ø 4,4-7,0
kg 0,122
PU 1
Cable stripper ASI, automatic Applications: Chemical industry, food industry, motor industry, shipbuilding, electrical engineering industry, automation technic, telecommunication: • Automatic and ergonomic wire stripper for ASi-interface cable (AktuatorSensor-Interface) with insulation made of TPE or PUR outer sheath. • Special hardened and formed blades according to the cable shape can be replaced. • With integrated side scale for quick and precise cable stripping of ASi-cables. • Impossible to damage the two flexible conductors inside when insert the ASicable with the straight outline next to the side scale. • Pliers body mode of fibreglass-reinforced polyamide.
Art. no. 211928 211928/1
TL 160
mm² 0,08-2,5 spare blades
kg 0,156 0,005
PU 1 1
Automatic cable stripper Insulation stripping: 0.08 up to 6.0 mm², PCV-insulated wire and cable. Cutting: 6.0 mm² standard, 4.0 mm² copper conductors, cutting capacity up to 6 mm²
Art. no. 210693
TL 160
kg 0,117
PU 1 Art. no. 211930 211930/1
Cable stripper Outlet 20 For Creating a cable section for shielded connection systems and potential equalisation. Compatible with the OBO cable system cable outlet. Particularly suitable for insulating round cables in tight working areas, for example, when working as potential equalisation in control and machine systems as well as in cable ducts. Insulation of a cable sequence at any point of the cable. Length of the cable section is fixed. Processing of various types of cable, for example, NYM (e.g. 3 x 1.5 mm² , 3 x 2.5mm², 5 x 1.5 mm²) or shielded cables.
TL 160 160
Ø 8-9 8-9
55 20
kg 0,104 0,100
mm² 0,08-6 spare blades
kg 0,255 0,005
PU 1 1
Automatic cable stripper Insulation stripping: 6.6 up to 16.0 mm², PCV-insulated wire and cable. Cutting: 6.0 mm² standard, 4.0 mm² copper conductors, cutting capacity up to 6 mm²
Art. no. 211932 211932/1 Art. no. 210697 210699
TL 205
TL 205
mm² 6-16 spare blades
kg 0,250 0,005
PU 1 1
PU 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
21
PC Strip PV/solar cables Art. 200630/32/34 Automatic Wire stripping pliers Wiring • Switch/Socket Art. 219696
Wire stripping pliers PV/solar cables Art. 210685
Cable stripping knife with hook blade Cable installation • Main cable feed • Sub-distribution Art. 200031
Universal stripper House installation • Cavity wall sockets Art. 200043 PC Cat House network Art. 200637
Stripper for coaxial cable TV, hi-fi systems Art. 200636 Precision stripper PWS Plus Intercom systems, alarm systems, leisure activities, bicycle illumination Model railways Art. 200033 „Coaxi“ stripper TV, hi-fi systems Art. 200035
Strippers for building installation work
Around the cable
Crimping
...convincing solutions
Crimping pliers for end sleeves
INFO Crimping pliers for end sleeves
Crimping pliers
When crimping end sleeves a distinction is made between sleeves with and without plastic collars and between trapezoid and square crimping.
heavy construction, with locking device, with adjustable crimp pressure, chrome plated, trapezoid crimping
The sleeves with a plastic collar make it easier to insert individual stranded wires. The coloured marking on the wire end sleeves is used to classify the cross section. Pliers with a square crimp ensure better contact in the terminal strip. The square crimp also facilitates alignment and assembly, as clamps can be attached to each of the surfaces. for short-circuit-proof cables
insulated end sleeves
Art. no. 210763 210842 210765 211672 210768 211674
TWIN
mm² 0,5-4 1-10 6-16 10-25 10-35 25-50
kg 0,578 0,553 0,582 0,580 0,606 0,600
PU 1 1 1 1 1 1
Crimping pliers for twin end sleeves heavy construction, with locking device, with adjustable crimp pressure, chrome plated, trapezoid crimping tin-plated
bare
Art. no. 211676 211678
Crimping pliers For core cable ends, with cutting and stripping mechanism, matt, chrome-plated
Art. no. 210820 210824 210826
TL 140 220 225
mm² 0,25-2,5 0,75-16 10-35
kg 0,202 0,304 0,277
mm² 0,5-6 6-16
kg 0,576 0,604
PU 1 1
Crimping pliers precise square crimping profile, automatic adjustment on wire diameter, with locking device, guaranteed DIN-crimp-connections, high transmission and ergonomically formed plastic handle, square shape
PU 1 1 1 Art. no. 210804
Crimping pliers
mm² 0,08-10
kg 0,413
PU 1
light construction, 20% angled handy form, with locking device, with adjustable crimp pressure, trapezoid crimping
Front-Crimping pliers Crimping from 0.08 to 10 mm², precise square crimping profile, automatic adjustment on wire diameter, frontal approach allows working in small areas, sidewise approach for end sleeves up to 2.5 mm², with locking device, high transmission and ergonomically formed plastic handle, square shape
Art. no. 211650 210841 211652
mm² 0,14-2,5 0,25-6 6-16
kg 0,371 0,380 0,374
PU 1 1 1
Art. no. 210819
24
kg Size TL Ø
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
mm² 0,08-10
NP Width Height Cu
kg 0,489
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
PU 1
Crimping pliers for end sleeves Front-Crimping pliers
Quadro complete set in case
automatic adjustment of crimp-profile, with locking device, with adjustable crimp pressure, trapezoid crimping
in case: 1 „Quadro-“-plier incl. magazine 2 spare magazines Box for end sleeve strips
Art. no. 210979 210979/A 210979/B
mm² 0,14-6 2,5-10 10-16
kg 0,575 0,481 0,584
PU 1 1 1
Crimping pliers Lever translated version for better transmission of force, with unlockable locking mechanism, trapezoidal pressing
Art. no. 210682 210682/2 210682/3
TL 170
mm² 0,5-2,5 Magazine for Quadro Box for end sleeves
kg 0,713 0,020 0,010
PU 1 1 1
Pneumatic crimping tools HAUPA Pneumatic Crimpers Art. no. 210788
mm² 10-50
kg 0,732
PU 1
Crimping pliers
Pneumatic crimpers crimp wire end sleeves quickly and without effort. Table top versions are actuated by a foot switch, allowing the operator to use both hands. The Pneumatic Crimpers are lightweight and easy to use. The crimping mechanism is easily activated, making it perfectly suited for work in control cabinets and electrical equipment. These tools are maintenance free - they require no routine calibration - only 60 - 90 psi to allow proper operation. Incl. spiral hose 2 m
Lever translated version for better transmission of force, with unlockable locking mechanism, trapezoidal pressing
Art. no. 210789
mm² 50-95
kg 0,800
PU 1
Quadro with magazine Integration of four functions for precise crimping of connector sleeves from tapes, 0.5 - 2.5 mm Ø. • Insulation stripping: 0.5 - 2.5 mm Ø • Twisting: 0.5 - 2.5 mm Ø • Cutting: cables and cords 0.5 - 2.5 mm Ø • Crimping: 0.5 - 2.5 mm Ø Art. no. 210682/1
TL 170
mm² 0,5-2,5
kg 0,056
Art. no. 217030 217040
TL 200 200
mm² 0,25-2,5 4-10
kg 0,720 0,739
PU 1 1
HAUPA Pneumatic Crimpers table top versions Table top versions are actuated by a foot switch, allowing the operator to use both hands. Incl. spiral hose, foot switch and table clamp
PU 1
Art. no. 217010 217020
TL 200 200
mm² 0,25-2,5 4-10
kg 5 5
PU 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
25
Crimping pliers for insulated crimp cable lugs
INFO Crimping pliers for insulated crimp cable lugs
Crimping pliers
Insulated cable lugs and crimp cable lugs are crimped in an oval form. The coloured marking of the wire cross section to the insulated cable lug is defined in DIN 46245, Parts 1, 2 and 3.
heavy construction, with locking device, with adjustable crimp pressure, chrome plated, oval crimping
Red => stands for 0.5 to 1 mm² Blue => stands for >1.5 to 2.5 mm² Yellow => stands for >2.5 to 6 mm² As the cable lug is rolled from a metal sheet, attention should be paid to the position of the butted edge. It should be in the middle of the top profile. If it is on the side, the edge opens up and the wire is not gastight or adequately clamped.
Art. no. 210761
mm² 0,5-6
kg 0,566
PU 1
Crimping pliers for shrink connectors heavy construction, with locking device, with adjustable crimp pressure, chrome plated, oval crimping
Butted edge
Art. no. 211695
Ring terminals
mm² 6
kg 0,566
PU 1
Crimping pliers
Fork terminals
Lever translated version for better transmission of force, with unlockable locking mechanism, oval pressing Round terminals
Flat terminals
Socket sleeves (female)
Round sleeves
Round pins
Socket sleeves (male)
Butt connectors
Parallel connectors
End connectors
Art. no. 210827
mm² 10-16
kg 0,472
PU 1
Crimping pliers for insulated crimping terminals with wire-and bolt-cutters and wire stripper with threaded bolt-cutter, oval crimping
Crimping pliers
Art. no. 210802
light construction, 20% angled handy form, with locking device, with adjustable crimp pressure, oval crimping
mm² 0,5-6
kg 0,178
PU 1
Combi-Crimping pliers for insulated and uninsulated tube terminals and connectors from 0.5 - 6 mm², C 45, cutting edges induction hardened, with wire-and bolt-cutters and wire stripper with threaded bolt-cutter
Art. no. 210845
mm² 0,08-2,5
kg 0,343
PU 1
Art. no. 210808
26
kg Size TL Ø
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
mm² 0,75-6
NP Width Height Cu
kg 0,198
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
PU 1
Crimping pliers for uninsulated terminals
INFO Crimping pliers for uninsulated terminals
Crimping pliers Lever translated version for better transmission of force, with mandrel pressing, for standard tubular cable lugs and connectors. Particularly well suited to nickel tubular cable lugs and connectors
Important when crimping uninsulated terminals and butt space connectors: Uninsulated crimping terminals are pressed together by means of so-called piercing compression. The crimp sleeve is compressed in the middle. The pressing ram should be set to the separating seam of the sleeve. Crimping terminals Ring type
Crimping terminals Fork type
Crimping terminals Pin type Art. no. 210772 210774
Crimping terminals Butt connectors
PU 1 1
Lever translated version for better transmission of force, with mandrel pressing, for standard tubular cable lugs and connectors. Particularly well suited to nickel tubular cable lugs and connectors
light construction, 20% angled handy form, with locking device, with adjustable crimp pressure, mandrel shape crimping
mm² 0,25-2,5 1,25-6
kg 0,478 0,503
Crimping pliers
Crimping terminals Parallel connectors
Crimping pliers
Art. no. 210778 210779
mm² 1-10 1-16
kg 0,363 0,366
Art. no. 210799
mm² 0,5-16
kg 0,903
PU 1
PU 1 1
Crimping pliers heavy construction, with locking device, with adjustable crimp pressure, chrome plated, mandrel shape crimping
Art. no. 210764
mm² 1,5-10
kg 0,565
PU 1
Crimping pliers Crimp-grip-pliers, one hand use, with cutting device, mandrel shape crimping
Art. no. 210810
mm² 0,1-10
kg 0,493
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
27
Crimping pliers for uninsulated open brass cable lugs
INFO Crimping pliers for uninsulated open brass cable lugs
Crimping pliers
We distinguish between wire crimps and insulation crimps. The end of the wire should0not project into the wire crimp, however it must also not lie just half beneath the insulation crimp. Only in this way can a standard-compliant crimp be ensured. In a good crimp the wire must be deformed. In this case one talks of a “gastight crimp”. To ensure precise crimping of open plug-in connections, locators can be attached to the pliers.
light construction, 20% angled handy form, with locking device, with adjustable crimp pressure, 211664/66/68 with Locator, roll crimping
Art. no. 210777 211664 211666 211668
Wrong: The end of the insulation is in the insulation crimp. Wrong: The stripped wire projects into the contact zone.
Socket sleeves (female) with cable stop
Locator
kg 0,366 0,384 0,384 0,379
4,8/6,3 2,8 4,8
PU 1 1 1 1
Crimping pliers heavy construction, with locking device, with adjustable crimp pressure, chrome plated, roll crimping
Correct: The end of the insulation and the stripped wire are crimped accurately. To facilitate accurate crimping a positioning aid is available for crimping pliers.
Socket sleeves (female) with cable stop and side cable connection
mm² 0,5-1,5 0,5-2,5 0,1-1 0,14-1,5
Art. no. 211682 210762 211684 211686
mm² 0,5-2,5 0,25-6
Locator
kg 0,568 0,575 0,024 0,024
6,3 2,8/4,8
PU 1 1 1 1
Flat terminals
Crimping pliers heavy construction, with locking device, with adjustable crimp pressure, chrome plated, roll crimping bare brass
bare brass
tin-plated brass
Precision-ground crimp profi les => clean crimp
Art. no. 210785 210786
Art. no. 210833
Ergonomically formed plastic handles => low fatigue work
28
PU 1 1
with final-point for processing of uninsulated terminals blades of 0.05 - 6 mm², one way process for contact- and isolation-crimping, with cable cutter and wire stripping device for wire up to 6 mm², roll crimping
Forced block, unblockable => guaranteed DIN-compliant crimped connection
Weight in kg Size in mm Total length Cross-section mm
kg 0,537 0,535
Crimp-Grip pliers
Adjustable crimping pressure => Wear compensation via adjusting screw
kg Size TL Ø
mm² 0,05-1 1,5-2,5
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
mm² 0,5-6
NP Width Height Cu
kg 0,525
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
PU 1
Crimping pliers for coaxial connections
Crimping pliers for contacts and connectors
Crimping pliers for coax-connections
INFO Crimping pliers for contacts and connectors
light construction, 20% angled handy form, with locking device, with adjustable crimp pressure, hexagon crimping
D–Sub plugs are open plug-in connectors that are connected with the wire via a rolling crimp. D-Sub plugs are used in modern office and communication technology. Rolled contacts are open plug-in connectors that are connected with the wire via a rolling crimp. It is important to choose the correct plug for the cross section of the wire. No single wire may project from the crimp.
Art. no. 210849
crimp RG 58-59-62-71
kg 0,303
PU 1
Twisted contacts are used to connect computer interfaces, power and control wires in multi-pole plug-in connections and flexible assembly lines in the automotive industry.
Crimping pliers for coax-connections heavy construction, with locking device, with adjustable crimp pressure, chrome plated, hexagon crimping
Crimping pliers Art. no. 210767 211680
crimp RG 58-59-62-6 RG 55-58-59-62
kg 0,567 0,578
PU 1 1
light construction, for twisted contacts, 20% angled handy form, with locking device, with adjustable crimp pressure, square crimping
Art. no. 211656 211658
crimp 0,14 - 4 1,5 - 6
kg 0,367 0,372
PU 1 1
Crimping pliers light construction, for rolled contacts, 20% angled handy form, with locking device
Art. no. 211660
crimp 0,14 - 1,5
kg 0,370
PU 1
Crimping pliers light construction, for D-Sub-connectors, 20% angled handy form, with locking
Art. no. 211662
crimp 0,08 - 0,5
kg 0,365
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
29
Crimping pliers for Photovoltaik
INFO Photovoltaik Photovoltaics is the direct conversion of light energy into electrical energy by means of solar cells. This method has been in use as an energy supplier in the majority of space vehicles since 1958. Since then it has been implemented on Earth as a method of power generation and is used, among other things, on roof surfaces, for ticket machines, in pocket calculators, on sound damping walls and on open spaces. The photovoltaic energy conversion is carried out with the assistance of solar cells that are connected in order to form solar modules in photovoltaic plants. The generated electricity can be stored on site in accumulators or fed into the power network. If the energy is fed into the public power network then the direct current generated by the solar cells with be converted by a converter into alternating current. In order to constantly make energy available, the energy must be stored.
HAUPA Crimp System for Photovoltaics
Crimping pliers
Crimp System Pliers for Photovoltaics
heavy construction, with locking device, with adjustable crimp pressure, chrome plated square crimp (MC 3), roll crimp (MC 4)
Art. no. 211657 211659
mm² 6,0 6,0
kg 0,560 0,560
The basic hardware of the carrying case consists of: • one pair of pliers, chromium-plated without crimping pliers insert • one allen wrench (A/F 2.5 mm) • one open-jawed wrench (A/F 7) • 2 pieces spare screws (M4 x 10/M4 x 16 mm)
PU 1 1
Crimpset „MULTI Photovoltaik“ Innovative crimping tool with rapid change system - one tool for almost all crimping applications. The set contains the HAUPA Crimping plier Multi (211962) as well as 2 most used dies for MC-Connectors. The pliers with the dies are packed in a handy synthetic material suitcase which protects against loss, pollution and damages of the tools.
Specificationen: • Special crimping pliers for crimping solar contacts of almost all types of connector systems • Guaranteed exact, solder-free, electric connections • Parallel closing of the crimping dies • 30% reduction of hand force through optimized leverage • Forced latching for reliable crimping, releasable • Crimp pressure adjustable • Long lever arm allowing single-hand and two-hand control • Easy change of the crimping pliers inserts, Locator fitting option for the determination of the connector position • Several crimping positions in one crimp die assembly • Design: chromium-plated with black plastic handle • Material: specially heat-treated special steel
Other advantages of HAUPA Multi set: • Screw less fast change system for crimping dies • Enormous space and weight saving • Single hand operation with expenditure energy • Ergonomic 2 component handle with soft synthetic material insert • With ratchet and built-in safety release, guarantees proper electrical connection • Adjustable crimp pressure • Pliers body from 3 mm, specially compensated, hardened sheet steel • Chrome plated tool frame • Additional purchase of other 22 crimping dies possible • Handy box protects pliers and dies • Dimension: 260 x 200 x 40 mm (w x d x h), Art. no. 212200
Crimping dies for „Multi - Contact“ connectors MC3 2,5 + 4 + 6 mm², AWG 13/11/10 Crimping dies for „Multi - Contact“ connectors MC4 2,5 + 4 + 6 mm², AWG 13/11/10
Art. no. 212005
30
kg Size TL Ø
mm² 6
kg 1,150
MC3 + MC4
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
PU 1
mm² 6
kg 0,998
PU 1
Crimp inserts for „Huber & Suhner“ contacts 212206 2,5 + 4 mm², AWG 13/11 212208 4 + 6 mm², AWG 13/11
1 1
Crimp inserts for „multi-contact“ contacts 212210 MC3, 2,5 + 4 + 6 mm², AWG 13/11/10 212212 MC3, Locator
1 1
Crimp inserts for „multi-contact“ contacts 212214 MC4, 2,5 + 4 + 6 mm², AWG 13/11/10 212216 MC4, Locator
1 1
Crimp insert for „Hirschmann“ contacts 212218 2,5 + 4 + 6 mm², AWG 13/11/10
1
Crimp insert for „Tyco“ contacts 212222 Locator für Tyco
1
Dies for Solar contacts Amphenol 212226 2,5 + 4 mm², AWG 13/11 212228 2,5 + 4 mm², AWG 13/11
1 1
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
Crimping pliers for modular plugs
INFO Crimping pliers for modular plugs
Crimping pliers for modular plugs
Stripping and crimping in one step. The following distinctions can be made between Western plugs:
for unshielded modular plugs 4-,6- and 8pole plug, 6DEC, heavy construction, with linear stroke and locking device, with cable cutter and stripper. Exactly crimp process through parallel crimping, even crimping quality by means of safety catch
4pole plug for telephone, power supply 6pole plug for fax and telephone connection 8pole plug for ISDN and PC connections
Art. no. 210871
crimp RJ11 6(4), RJ12 6(4), RJ45, RJ10 4(4), RJ14
kg
PU
0,520
1
kg 0,260 0,261 0,291
PU 1 1 1
Crimping pliers for modular plugs for unshielded modular plug, with linear stroke and locking device
Crimping pliers for modular plugs for unshielded modular plugs, inexpensive, lightweight tool for the casual usage
Art. no. 210971 210973 210981 Art. no. 210867 210865 210869
crimp RJ10 4(4), RJ14 RJ11 6(4), RJ12 6(4) RJ45
kg 0,218 0,220 0,233
PU 1 1 1
Crimping pliers for modular plugs for unshielded modular plugs, with cable cutter and stripper, light construction (6p, 8p, 6DEC, 4p)
Art. no. 213050
crimp RJ11 6(4), RJ12 6(4), RJ45, RJ10 4(4), RJ14
kg
PU
0,300
1
crimp RJ10 4(4), RJ14 RJ11 6(4), RJ12 6(4) RJ45
Crimping pliers for modular plugs Semi-professional crimping pliers for shielded and unshielded Western plugs, with replaceable crimping dies, easy to use, light on the arms due to optimum leverage, optimum crimping, pliers body made of hardened quality steel, quick and simple replacement of crimping dies, adjustable crimping pressure and depth, application area for small and medium series, 50.000 working processes guaranteed, without dies
Art. no. 213000
kg 0,420
PU 1
kg 0,082 0,081 0,080 0,076 0,074 0,076 0,071
PU 1 1 1 1 1 1 1
Dies for crimping pliers 213000
Crimping pliers for modular plugs for unshielded modular plugs, with cable cutter and stripper. Exactly crimp process through parallel crimping, even crimping quality by means of safety catch
Art. no. 210857
crimp RJ11, RJ12 6(4), RJ45
kg 0,471
PU 1
Art. no. 213002 213004 213006 213008 213010 213012 213014
crimp RJ10 4(4) RJ11 6(4), RJ12 6(4) 6DEC RJ45 RJ50 8pole plug, shielded 10pole plug, shielded
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
31
Crimping pliers for modular plugs Crimping pliers for modular plugs
Network range
Professional crimping pliers for screened and unscreened Western plugs, with replaceable crimping dies, easy to use, light on the arms due to optimum leverage, optimum crimping, pliers body made of hardened quality steel, quick and simple replacement of crimping dies, adjustable crimping pressure and depth, application area for medium to large series, 50.000 working processes guaranteed, without dies
Case with insert. With tools for cable stripping, cutting, crimping and applying to strips, sockets or fields.
Art. no. 213020
kg 0,474
Content: • 1 crimping pliers for Western plugs (213050) • 1 wire stripper for UTP/STP data cable (200068) • 1 Sensor input tool LSA for UTP and STP cable (300322)
PU 1 Art. no. 300033
Dies
kg 0,700
for crimping pliers 213020
Art. no. 213022 213024 213026 213028 213030 213032 213034 213036 213038 213040 213042 213044 213046 213048
crimp 8pole, shielded 10pole shielded RJ10 4(4) RJ11 6(4), RJ12 6(4) 6DEC RJ45 RJ50 8pole, CAT 5 6pole, shielded 8pole, shielded Ø 3,7 mm Ø 4,5 mm Ø 5,2 mm Ø 6,0 mm
kg 0,103 0,102 0,096 0,093 0,091 0,106 0,102 0,106 0,106 0,113 0,030 0,030 0,030 0,030
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Reference list for western plugs on the Internet:
Short to medium runs http://www.haupa.com/documents/html/d/katalog/ruk/crimp/datenblatt/ referenzliste_westernstecker_k.htm Medium to large runs http://www.haupa.com/documents/html/d/katalog/ruk/crimp/datenblatt/ referenzliste_westernstecker_g.htm
32
kg Size TL Ø
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
PU 1
Multi-function pliers Crimping pliers Combi-Crimp
Crimping dies for TWIN end sleeves
crimping pliers for insulated terminals 0,5 - 2,5 mm² and end sleeves 0,5 - 6 mm²
for TWIN-end sleeves, trapezoid crimping
Art. no. 211676/E 211678/E Art. no. 210784
kg 0,560
PU 1
Crimping pliers X-Crimp
kg 0,050 0,050
PU 1 1
kg 0,050 0,050
PU 1 1
kg 0,111
PU 1
kg 0,050
PU 1
kg 0,050
PU 1
kg 0,560
PU 1
kg 0,566
PU 1
Crimping dies for coaxial cable for coaxial cable, hexagon crimping
Art. no. 210767/E 211680/E
Crimping pliers used to quickly change HAUPA precision pressing inserts. • Reliable crimping results just like with fixed pressing inserts • Forced lock ensures standardised pressing actions • Flat construction enables you to work precisely even when space is at a premium
mm² 0,5-6 6-16
crimp RG 58-59-62-6 RG 55-58-59-62
Crimping dies for flat connectors for flat connectors, uninsulated open brass cable lugs, roll crimping
Art. no. 210762/E
mm² 0,25-6
Crimping dies for Photovoltaik MC3 for „multi-contact“ contacts
Art. no. 211690
kg 0,566
PU 1
Art. no. 211657/E
mm² 6,0
Crimping dies for Photovoltaik MC4
Crimping dies for insulated crimp cable lugs for insulated crimp cable lugs, oval crimping Art. no. 211659/E Art. no. 210761/E
mm² 0,5-6,0
kg 0,053
PU 1
mm² 6,0
Crimping dies for cable lugs / end sleeves
Crimping dies for uninsulated terminals for uninsulated terminals, mandrel shape crimping Art. no. 210784/E Art. no. 210764/E
kg 0,111
PU 1
Crimping dies for shrink connectors
Crimping dies for end sleeves for end sleeves, trapezoid crimping Art. no. 211695/E Art. no. 210763/E 210842/E 210765/E 211672/E 210768/E 211674/E
mm² 0,5-4 1-10 6-16 10-25 10-35 25-50
kg 0,072 0,054 0,111 0,050 0,050 0,050
mm² 0,5-10
PU 1 1 1 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
33
Multi-function pliers
Electric crimper
Crimpset MULTI
HAUPA electric crimper
Innovative crimping tool with rapid change system for the expert - tools for almost all crimping applications.
The Electric crimper is an ideal device to securely crimp wires and cable terminals such as: • insulated cable lugs to 6 mm²/10 AWG • Tubular cable lugs, solderl. terminals to 10 mm²/8 AWG • Flat tab terminals to 6 mm²/10 AWG • Wire end sleeves to 50 mm²/1 AWG
Contents: • crimping pliers MULTI • dies for insulated terminals 0.5 - 6 mm2 • dies for insulated and uninsulated end sleeves 0.5 - 16 mm2 • dies for uninsulated terminals 0.5 - 10 mm2 • dies for BNC and TNC coaxial connectors RG 58-59-62-71 Product specifications • fast change system (Patent pending) • easy changing of crimp dies by means of thumb screws • easy interlock • Nickel plated surface • no big strength required • with ratchet and built-in safety release, garantees proper electrical connection • adjustable crimp pressure • Pliers body from 3 mm, specially compensated, hardened sheet steel • ergonomic 2 component handle with soft synthetic material insert • Dimension: 260 x 200 x 40 mm (w x d x h)
Art. no. 211960
kg 1,119
The Electric Crimper can be operated in one of two modes: Mode 1: controls the entire crimp process by pressing down the pedal switch. Mode 2: allows the user to fix the terminal on the cable by actuating the foot switch once. To finish the crimping process, he presses down the foot switch once again. Mode 2 is used for more complex terminals. The onset of compression force can be adjusted for each new terminal to satisfy crimp integrity. That way, damage to dies and terminals can be minimised. Simply press a button to select the opening for each die. Since some female terminals are more difficult to crimp, a moveable locator can be utilised to ensure proper crimping. Various standard dies are available, as well as dies designed to customer specifications. Technical Data Art. No. 217050: Dimensions (w x h x d): 140 x 220 x 320 mm Weight: 10 kg / Weight of foot pedal: 1.2 kg / Max. press capacity: 10 kN Pressing time: 1 s / Counter: -digit LCD display Mains connection: 30 V/50 Hz (120 V/60 Hz) / Power consumption: 160 VA
PU 1
Crimping pliers „Multi“ without dies
Art. no. 217050 Art. no. 211962
kg 0,582
PU 1
More possibilities of dies - please, order separately 211964 211965 211990 211991 211992 211993 211994 211995 211996 211997 211968 211969 211970 211971 211972 211973 211974 211980 211981 211982 211983 211985 212007 212008
34
kg Size TL Ø
End sleeves 16 - 35 mm² Sockets 0.5 - 2.5 mm² Coax, Thinnet, Mini-UHF, BNC/TNC RG 58, RG 174 Coax, BNC/TNC RG 174, RG 179, small coaxial connectors SMA, SMB, Mini-59, Mini-UHF, BNC/TNC RG 6, RG 6 Quad Coax, CATV “F” Typ, BNC/TNC RG 6, RG 6 Quad N-Typ RG 8, RG 11 Coax, N-Typ RG 8, RG 11, RG 213, RG 216 Fibre Optic, SMA Typ Fibre Optic, SMA, SMB, SFR, ST, SC Typ RJ 45 - 8P8K, Steward Connectors, 22-24 AWG RJ 11, RJ 12 - 6P6K, Steward Connectors, 22-24 AWG Telefon 4P4K, AMP+Steward Connectors, 22-24 AWG RJ 45 - 8P8K, AMP, 22-24 AWG RJ 11, RJ 12 - 6P6C, AMP, 22-24 AWG RJ 11, DEC MMJ - 6P6K, AMP, 22-24 AWG RJ 50 - 10P10K, AMP, 22-24 AWG RJ 45 - 8P8K, short, Steward Connectors, STP 22-24 AWG RJ 45 - 8P8K, long, Hirose, STP 22-24 AWG RJ 45 - 8P8K, short, Hirose, STP 22-24 AWG RJ 45 - 8P8K, Molex, for Ø 5.0 mm, STP 22-24 AWG RJ 45 - 8P8K, AMP, Molex, for Ø 6.0 mm, STP 22-24 AWG MC3 MC4 Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 CW RJ RG CSS
mm² 6-50
kg 10
PU 1
Dies for electric crimper 217050 217052 217056 217058 217060 217062 217064 217066 217068 217070 217072 217074 217076 217078 217080 217082 217084 217086 217088 217090 217092 217094 217096 217098
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
Rolled contacts 0.14-1/1,5/2.5/4 mm² Rolled contacts 0.1-1.5 mm² Rolled crimp contacts 0.1-1.5 mm² Rolled crimp contacts 0.5-6 mm² End sleeves 0.25-6 mm² Insolated terminals 0.5-6 mm² symetric Insolated terminals 0.5-6 mm² asymetric Tube terminals 0.34-2.5 mm² Tube terminals “super flex” 4-10 mm² Tube terminals “standard” 4-10 mm² Crimping terminals 4-10 mm² Crimping terminals 0.5-10 mm² Protection cover to 21 70 56, 21 70 60 Protection cover to 21 70 70, 21 70 72, 21 70 74, 21 70 76 Protection cover to 21 70 68 Protection cover to 21 70 62 Protection cover to 21 70 64, 21 70 66 Locator to 21 70 60, socket sleeves 6.3 mm Locator to 21 70 56, 21 70 58, 21 70 60, socket sleeves 4.8 mm Locator to 21 70 56, socket sleeves (female) 2.8 x 5 mm Locator to 21 70 56, socket sleeves (female) 2.8 x 6 mm Locator to 21 70 60, socket (male) 6.3 mm Locator to 21 70 60, socket (male) 6.3 mm HN
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Aluminium Cutting length Packing unit/piece
INFO Crimping pliers for uninsulated tubular cable lugs
Crimping pliers
1. Choosing the connector To achieve a standard-compliant connection it is necessary to choose the correct connector for the application and the right cable cross section.
with punch and adjustable screw for different cross-sections, for standard tube terminals and connectors, mandrel shape crimping
2. Stripping Before notching, the cable must be stripped according to the insertion length (+10% due to change in length of the crimping sleeve. 3. Cleaning The ends of the wire must be cleaned thoroughly to remove all traces of dirt and oxidation before being assembled. 4. Assembly Insert the cable into the cable lug or connector to its full insertion length. Crimp the cable lug or connector with the correct tool, taking account of the crimping direction (see figure).
Art. no. 210791
mm² 10-120
kg 3,040
PU 1
kg 1,351 1,352 3,970 4,016
PU 1 1 1 1
Crimping pliers with built-in rotable profile disk, hexagon crimping
Crimping direction
Crimping direction
1. Crimp Crimping direction
Tube cable lugs
DIN cable lugs
Tin-plated copper
Butt connectors, DIN
Tin-plated copper
Tin-plated copper
bare
bare
with inspection
Crimping pliers Lever translated version for better transmission of force, with mandrel pressing, for standard tubular cable lugs and connectors. Particularly well suited to nickel tubular cable lugs and connectors
Art. no. 210772 210774
mm² 1-10 1-16
kg 0,478 0,503
Lever translated version for better transmission of force, with mandrel pressing, for standard tubular cable lugs and connectors. Particularly well suited to nickel tubular cable lugs and connectors
mm² 0,75-16
Standard
kg 0,574
mm² 6-50 6-50 10-120 10-120
Standard DIN Standard DIN
Crimping pliers for uninsulated “Standard” tube terminals/connectors and tube terminals for fine-wire cables, with integrated rotatable profile disc, mandrel shape crimping
PU 1 1
Crimping pliers
Art. no. 210830
Art. no. 210805 210805 K 210850 210853
Art. no. 210834 210836 210838 210840
mm² 6-50 50-120 120-240 185-400
kg 2,588 5,280 5,200 5,200
PU 1 1 1 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
35
INFO Mechanical crimping pliers for tubular cable lugs
Crimping dies
Mechanical crimping tool characterised by its compact design. It is possible to make crimps even in confined working conditions, where conventional large tools cannot be used. The mature construction of the drive has proven its reliability many times over in practice. In this manual crimping tool very little wear can be seen even after many years of use, this is decisive for the reliable repetition of the required crimping depth. After all, today’s highly stressed crimped connections only comply with safety regulations when the required electrical and mechanical values are achieved over long periods. Another safety aspect is that the crimping tool can only be detached from the crimped lug when the required crimping depth has been reached. By turning the wheel on the handle in an anti-clockwise direction the crimping inset can be set in position on the lug. Only then does the actual crimping process begin with the one-hand lever. The quality of the crimped connection is dependent on the choice of cable lug, the crimp inset and the correct choice of cable cross section.
Art. no. 215004 215006 215008 215010 215012
for crimping terminals and connectors, standard range, WM crimping
mm² 10 16 25 35 50
one hand precise tool, with ratchet and built-in-force-blocking device, crimping pressure 20 kN, interchangeable dies, easy to remove from the crimped lug by opening the crimping head, special small design for working in small areas
PU 1 1 1 1 1
kg 0,100 0,100 0,100 0,150 0,150 0,150
PU 1 1 1 1 1 1
Crimping dies for crimping terminals DIN, hexagon shape
Art. no. 215030 215032 215034 215036 215038 215040
Crimping pliers
kg 0,041 0,040 0,037 0,036 0,033
mm² 6 10 16 25 35 50
Cu 6 10 16 25 35 50
Id. 5 6 8 10 12 14
Crimping dies noninsulated crimping terminals, mandrel shape crimping, DIN 46234
Art. no. 215014 215016 215018 215020 215022 215024
Product-specific features • outstanding manageability • compact construction • precision drive • fast forward feed • can be used anywhere
mm² 6 10 16 25 35 10-35
kg 0,018 0,190 0,190 0,190 0,020 0,020
PU 1 1 1 1 1 1
Crimping dies noninsulated crimping terminals, mandrel shape crimping, DIN 46234
Art. no. 215026 215028 Art. no. 215000
mm² 6-50
kg 1,531
PU 1
mm² 10 16
kg 0,039 0,039
PU 1 1
kg 0,150 0,150 0,150 0,200 0,200
PU 1 1 1 1 1
Crimping dies for end sleeves, trapezoid crimping
Metal box for storing of crimping pliers and dies Art. no. 215042 215044 215046 215048 215050
Art. no. 215002
36
kg Size TL Ø
kg 0,934
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
mm² 6 10 16 25 35
PU 1
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
INFO Mechanical crimping pliers for tubular cable lugs
Crimping dies for 21 51 00 for crimping terminals and connectors, standard range, WM crimping
These mechanical manual crimping pliers are modern, high performance tools. They can be used anywhere in the wide range of solder-free connection technology thanks to a comprehensive range of crimping dies. Crimping stroke and pressure (to approx. 5.5 t) are created by several hand lever movements. The manual force required is low due to the high efficiency of the system. The press and the connecting parts can only be separated from one another when the crimp is complete. This drive system ensures that the required crimping depth is always achieved. The hinged cover guarantees comfortable handling of the press, even in awkward-to-reach positions such as in control cabinets. By turning the fast forward feed lever to place the crimp inset on the cable lug, the number of manual lever movements is considerably reduced and rational work is guaranteed. Only then does the actual crimping process begin with the hand lever. When the required crimping depth has been reached the press releases pressure spontaneously and the hinged cover can be opened to remove the connector. The crimping process can be interrupted if an error has been made in the choice of the inset, cable lug or cable. To do this swing the hand lever completely out, depress the ratchet and turn the forward feed lever backwards.
Art. no. 215104 215106 215108 215110 215112
mm² 10/70 16/35 25/50 95 120
kg 0,130 0,132 0,126 0,138 0,136
PU 1 1 1 1 1
kg 0,128 0,130 0,130 0,130 0,130
PU 1 1 1 1 1
Crimping dies for 21 51 00 for crimping terminals DIN, hexagonal crimping
Art. no. 215142 215144 215146 215148 215150
mm² 10/70 16/35 25/50 95 120
Cu 70 35 50 95 120
Al 50 25 35 70
Id. 6-16 8-12 10-14 18 20
Crimping dies for 21 51 00
Crimping pliers precise tool with ratchet and built-in-force-locking device, crimping pressure 50 kN, interchangeable dies, easy to remove from the crimped lug by opening the crimping head
for uninsulated crimping terminals, for up to four diameter, mandrel shape crimping, DIN 46234 + DIN 46341
Art. no. 215114 215116 215118 215120 215122
Product-specific features • can be used anywhere • minimum strength required • broad application spectrum • precision drive • rational use
mm² 6-70 10-35 16-50 6-50 70
kg 0,080 0,060 0,055 0,150 0,150
PU 1 1 1 1 1
kg 0,147 0,152 0,153 0,154
PU 1 1 1 1
kg 0,155 0,150 0,150
PU 1 1 1
kg 0,059 0,059 0,059 0,059 0,059
PU 1 1 1 1 1
Crimping dies for 21 51 00 for insulated crimping terminals, oval crimping
Art. no. 215124 215126 215128 215130
mm² 10 16 25 35
Crimping dies for 21 51 00 for rounding of square copper and aluminium Art. no. 215100
mm² 6-120
kg 2,100
PU 1 Art. no. 215152 215154 215156
Metal box for storing of crimping pliers and dies
mm² 25-35 35-70 95
Crimping dies for 21 51 00 for end sleeves, trapezoid crimping
Art. no. 215102
kg 1,700
PU 1
Art. no. 215164 215166 215168 215170 215172
mm² 25 35 50 70 95
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
37
INFO Mechanical crimping pliers for tubular cable lugs
Crimping dies for 21 52 00 for crimping terminals and connectors, standard range, WM crimping
In this hand press the crimping stroke is produced by a number of hand lever movements. The transport ratchet starts the eccentric wheel moving and conrods convert the eccentric turning motion into a straight-line stroke of the guide that runs in grooves. The bottom crimping inset is placed in the guide. It sits on an adjustment plate that is screwed on to the guide. This plate compensates for all the tolerances resulting from the manufacturing process or wear and tear. By turning the wheel on the handle in an anti-clockwise direction the crimping inset can be transported directly to the installation on the connecting part. Only then does the actual crimping process begin with the hand lever. When the required crimping depth has been reached the press releases the pressure spontaneously and the hinged cover can be opened to remove the connector. The crimping process can be interrupted if an error has been made in the classification of the inset, cable lug or cable. To do this swing the hand lever completely out, depress the ratchet and turn the forward feed lever backwards. The quality of the crimped connection is dependent on the choice of cable lug, the crimp inset and the correct choice of cable cross section.
Art. no. 215204 215206 215208 215210 215212 215201 215203 215205 215207
mm² 10-25 16-35 50 70 95 120 150 185 240
kg 0,221 0,320 0,349 0,331 0,330 2,486 0,308 0,317 0,300
PU 1 1 1 1 1 1 1 1 1
kg 0,350 0,330 0,328 0,330 0,326 0,326 0,321 0,300 0,305 0,305 0,290
PU 1 1 1 1 1 1 1 1 1 1 1
kg 0,178 0,169 0,163 0,170 0,163 0,161 0,152 0,144
PU 1 1 1 1 1 1 1 1
kg 0,400 0,380 0,381 0,361 0,400 0,363 0,401
PU 1 1 1 1 1 1 1
Crimping dies for 21 52 00 for crimping terminals DIN, hexagon crimping
Art. no. 215230 215232 215234 215236 215238 215240 215242 215244 215246 215248 215250
Crimping pliers precise tool with ratchet and built-in-force-locking device, interchangeable dies, easy to remove from the crimped lug by opening the crimping head
kg 4,500
16 25 35 50 70 120 150 185
Id. 6 8 10 12 14 16 18 20 22 25 28
for uninsulated crimping terminals, mandrel shape crimping, DIN 46234 + DIN 46341
Art. no. 215214 215216 215218 215220 215222 215224 215226 215228 mm² 10-240
Al
Crimping dies for 21 52 00
Product-specific features • can be used anywhere • minimum strength required • broad application spectrum • precision drive • rational use
Art. no. 215200
mm² 10 16 25 35 50 70 95 120 150 185 240
PU 1
mm² 10-70 95-150 10-70 16-35 25-50 95 120 150
Crimping dies for 21 52 00 for end sleeves, trapezoid crimping
Metal box for storing of crimping pliers and dies Art. no. 215252 215254 215256 215258 215260 215262 215264
Art. no. 215202
38
kg Size TL Ø
kg 3,700
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
mm² 16 25 35 50 70 95 120
PU 1
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
INFO Mechanical crimping pliers for tubular cable lugs
Crimping dies for 21 53 00 for crimping terminals and connectors, standard range, WM crimping
This mechanical hand press is a modern high performance tool. Its eccentric drive has been tried and tested in extreme temperatures and in day-to-day use. When handled properly this tool is very low maintenance. Crimps can also be made in larger cable cross sections without much effort on the part of the user, because the outer notches of the eccentric drive only move one notch at a time through the hand lever movement. In other words, the required pressure is also created from a specific number of individual strokes. The device is characterised by its manageability although it reaches the enormous pressure of 100 kN. The press and the connecting parts can only be separated from one another when the crimp is complete. This drive system ensures that the required crimping depth is always achieved. Thus the reliability of crimped connections that is demanded today more than ever before is guaranteed.
Art. no. 215302 215304 215306 215308 215310 215312 215314 215316 215318 215320 215322
mm² 10-25 16-35 50 70 95 120 150 185 240 300 400
kg 0,200 0,200 0,200 0,200 0,208 0,196 0,195 0,237 0,229 0,231 0,200
PU 1 1 1 1 1 1 1 1 1 1 1
kg 0,211 0,210 0,211 0,207 0,202 0,203 0,196 0,195 0,200 0,222
PU 1 1 1 1 1 1 1 1 1 1
kg 0,444 0,445 0,200 0,474 0,200 0,200 0,200 0,446 0,200
PU 1 1 1 1 1 1 1 1 1
Crimping dies for 21 53 00 for crimping terminals DIN and AL-terminals, hexagon crimping
Crimping pliers precise tool with ratchet and built-in-force-locking device, crimping pressure 100 kN, interchangeable dies, easy to remove from the crimped lug by opening the crimping head
Product-specific features • can be used anywhere • minimum strength required • broad application spectrum • precision drive • rational use • high crimping pressure of 100 kN
Art. no. 215300
mm² 10-400
kg 4,800
PU 1
Art. no. 215324 215326 215328 215330 215332 215334 215336 215338 215340 215342
mm² 10 16 25 35 50 70 95 120 150 185
Id. 6 8 10 12 14 16 18 20 22 25
Crimping dies for 21 53 00 for rounding of square copper and aluminium
Art. no. 215348 215350 215352 215354 215356 215358 215360 215362 215364
mm² 25-35 35-50 50-70 70-95 95-120 120-150 150-185 185-240 240-300
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
39
Around the cable
Hydraulic crimping tools
...convincing solutions
Hydraulic punching tools Electro-hydraulic punching tool „AS-6“
Punching dies, metric
In a black plastic case and including 1 charger, 2 batteries, 1 carry strap, without inserts. Extent of supply: 1 hydraulic punch: 1 connecting rod 3/8-24 UNF (art. 217600), 1 connecting rod 3/4-16 UNF (art. 217602), 1 adapter (art. 217664), 1 spacer bushing (art. 217664), 1 transport case. Advantages: • Head can be rotated by 360° • Flexible aluminium head • Automatic end switch off • Non-slip handle area • Slim and compact construction • LED to illuminate the area you are working in • Li-ion technology
Art. no. 217610 217612 217614 217616 217618 217620 217622
Ø 16,5 20,5 25,5 32,5 40,5 50,5 63,5
ISO 16 ISO 20 ISO 25 ISO 32 ISO 40 ISO 50 ISO 63
kg 0,070 0,090 0,150 0,220 0,900 0,640 0,950
PU 1 1 1 1 1 1 1
Ø 15,2 PG9 18,6 PG11 20,4 PG13,5 22,5 PG16 28,3 PG21 37 PG29 47 PG36 54 PG42 60 PG48
kg 0,060 0,084 0,091 0,120 0,170 0,330 0,536 0,731 0,896
PU 1 1 1 1 1 1 1 1 1
kg 1,862 1,500 2
PU 1 1 1
kg 0,040 0,203
PU 1 1
kg 0,100
PU 1
kg 0,100
PU 1
Punching dies, PG
Punching capacity: Shaped holes 138 x 138 mm (ST37 2.5 mm) Round holes 150 mm (ST37 3 mm) / 63 mm (VA 2 mm) Technical data: • Pressing force: 60 kN • Working pressure: 600 bar • Battery charge time: 60 minutes • Battery voltage: 12 V • Battery capacity: 2 Ah • Working pressure: 600 bar • Weight: 3.64 kg • Weight of set: 4.7 kg Art. no. 217600
kg 4,700
PU 1
Art. no. 217630 217632 217634 217636 217638 217640 217642 217644 217646
Punching dies, square
Hydraulic hand-punching tool „HS-8“ Punches precise holes with almost no burring. Ideal for fast, frontal punching of control panels. Extent of supply: 1 hydraulic hand punch, 1 connecting rod 3/8-24 UNF (art. 217600), 1 connecting rod 3/4-16 UNF (art. 217602), 1 adapter (art. 217664), 1 spacer bushing (art. 217664), 1 transport case.
Art. no. 217650 217652 217654
• Punching performance: Steel sheet of up to a maximum of 3 mm • Pressing force: 80 kN • Length: 308 mm • Weight: 2,4 kg • Weight Set: 3,8 kg
Art. no. 217604
height 46 68 92
Connecting rod
kg 3,800
PU 1
Art. no. 217660 217662
1 2
Adapter Hydraulic hand-punch-cutter „HS-6“ Punches accurate slugs nearly free of burs. Usable for building and maintaining control boxes, for car retrofitting and for sanitary application. Extent of supply: 1 hydraulic punching tool, 1 rod 3/8-24 UNF (art. 217600), 1 rod 3/4-16 UNF (art. 217602), 1 adapter (art. 217664), 1 sleeve (art. 217664), 1 plastic case with insert.
Art. no. 217664
• Punching capacity: Steel plates up to max. 3 mm
Spacer bushing
• Pressing force: 60 kN • Length: 230 mm • Weight: 2,4 kg • Weight Set: 3,8 kg Art. no. 217666
Art. no. 217602
42
kg Size TL Ø
kg 3,800
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
PU 1
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
Battery powered crimping tools Battery powered crimping tool „SC-2“
Crimping dies for flat connectors
2 stage hydraulics for interchangeable crimping headstock, crimping head 180° swivelling, manual return flow after perfect pressure. Extent of supply: 1 crimping tool, 1 charger, 2 batteries, 1 strap, in light plastic box, without crimping headstock. • Pressing force in kN: 20 kN • Working pressure in bar: 700 • Opening/ Hub: 9 mm • Pressing time, battery-operated in seconds: 2 • Battery charging time in minutes: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Weight in kg without batterie: 2,1 • Weight of set in kg with batterie: 7,9
for flat connectors, uninsulated open brass cable lugs, roll crimping
Art. no. 210762/E
mm² 0,25-6
kg 0,111
PU 1
kg 0,050
PU 1
kg 0,050
PU 1
kg 0,560
PU 1
kg 0,566
PU 1
Crimping dies for Photovoltaik MC3 for „multi-contact“ contacts
Art. no. 211657/E
mm² 6,0
Crimping dies for Photovoltaik MC4 Art. no. 217200
mm² 0,5-50
kg 7,900
PU 1 Art. no. 211659/E
Crimping dies for insulated crimp cable lugs
Crimping dies for cable lugs / end sleeves
for insulated crimp cable lugs, oval crimping
Art. no. 210761/E
mm² 0,5-6,0
mm² 6,0
kg 0,053
PU 1
Crimping dies for uninsulated terminals
Art. no. 210784/E
for uninsulated terminals, mandrel shape crimping
Crimping dies for shrink connectors
Art. no. 210764/E
kg 0,111
PU 1
kg 0,072 0,054 0,111 0,050 0,050 0,050
PU 1 1 1 1 1 1
kg 0,050 0,050
PU 1 1
kg 0,050 0,050
PU 1 1
Crimping dies for end sleeves
Art. no. 211695/E
mm² 0,5-10
for end sleeves, trapezoid crimping
Art. no. 210763/E 210842/E 210765/E 211672/E 210768/E 211674/E
mm² 0,5-4 1-10 6-16 10-25 10-35 25-50
Crimping dies for TWIN end sleeves for TWIN-end sleeves, trapezoid crimping
Art. no. 211676/E 211678/E
mm² 0,5-6 6-16
Crimping dies for coaxial cable for coaxial cable, hexagon crimping
Art. no. 210767/E 211680/E
crimp RG 58-59-62-6 RG 55-58-59-62
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
43
Battery powered crimping tools Battery powered crimping tool „SL-2“ Hydraulic for interchangeable crimping headstock, manual return flow after perfect pressure. Extent of supply: 1 crimping tool, 1 charger, 2 batteries, 1 strap, in light plastic box, without crimping headstock. • Pressing force in kN: 20 kN • Working pressure in bar: 700 • Opening/ Hub: 9 mm • Pressing time, battery-operated in seconds: 2 • Battery charging time in minutes: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Weight in kg without batterie: 2,1 • Weight of set in kg with batterie: 7,0
Art. no. 217500
mm² 0,5-95
kg 7,000
PU 1
Crimping headstock for uninsulated terminals, standard series terminals and connectors, stainless steel connectors, nickel connectors, mandrel shape crimping
Art. no. 210830/E
kg 0,050
PU 1
kg 0,050
PU 1
kg 0,050
PU 1
kg 0,050
PU 1
Crimping headstock for insulated crimp cable lugs, oval crimping
Art. no. 210827/E
Crimping headstock for end sleeves, trapezoid crimping
Art. no. 210788/E
Crimping headstock for end sleeves, trapezoid crimping
Art. no. 210789/E
44
kg Size TL Ø
Weight in kg Size in mm Total length Cross-section mm
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
Battery powered crimping tools Battery powered crimping tool „SH-6“
Hydraulic hand pliers „HH-6“
2 stage hydraulics for interchangeable dies, crimping head 180° swivelling, with fast opening, manual return flow after perfect pressure. Extent of supply: 1 crimping tool, 1 charger, 2 batteries, 1 strap, in light plastic box, without dies. • Pressing force in kN: 60 kN • Working pressure in bar: 700 • Head can be opened yes • Opening/ Hub: 17 mm • Pressing width: slim • Cable lugs: standard Cu 10-240 • DIN Cu 10-240 • DIN Al 16-185 • Connectors: Cu 10-240 • DIN Cu 10-240 • DIN Al 16-185 • Pressing time, battery-operated in seconds: ca. 5 • Battery charging time in minutes: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Weight in kg without batterie: 2,4 • Weight of set in kg with batterie: 7,9
Crimping head can be rotated by 180°, manual return after completed pressing, light and compact construction in black plastic case, without dies. • Pressing force in kN: 60 • Working pressure in bar: 700 • Opening / Hub: 17 mm • Head can be opened • Pressing width: slim • Cable lugs: standard Cu 10-240 • DIN Cu 10-240 • DIN Al 16-185 • Connectors: standard Cu 10-240 • DIN Cu 10-240 • DIN Al 16-185 • Dual-piston pump • Weight in kg: 3,0 • Weight of set in kg: 4,5
Art. no. 215881
mm² 10-240
kg 7,900
PU 1
Art. no. 215800
TL 370
mm² 10-240
kg 4,500
PU 1
kg 0,157 0,155 0,150 0,145 0,159 0,156 0,156
PU 1 1 1 1 1 1 1
kg 0,155 0,151 0,149 0,129 0,145 0,147 0,114
PU 1 1 1 1 1 1 1
Crimping dies Battery powered crimping tool „AH-6“
standard copper tube terminals and connectors, hexagonal press
2 step hydraulic for replaceable pressing dies, crimping head can be rotated by 180°, can be opened, with quick opening, manual return after completed pressing, LED to check battery status. Included in delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case, without dies. • Pressing force in kN: 60 • Working pressure in bar: 700 • Opening/ Hub: 17 mm • Head can be opened • Pressing width: slim • Cable lugs: standard Cu 10-240 • DIN Cu 10-240 • DIN Al 16-185 • Connectors: standard Cu 10-240 • DIN Cu 10-240 • DIN Al 16-185 • Pressing time, battery-operated in seconds: 6 • Battery charging time in minutes: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Dual-piston pump • Weight in kg: 3,5 • Weight of set in kg: 8,5
Art. no. 215852 215854 215856 215858 215859 215860 215861
Crimping dies DIN Cu + Al standard copper tube terminals and connectors, hexagonal press
Art. no. 215862 215864 215866 215868 215869 215870 215872
Art. no. 215880
TL 335
mm² 10-240
kg 8,500
mm² 10-16 25-35 50-70 95-120 150 185 240
mm² 10-16 25-35 50-70 95-120 150 185 240
Al 16-25 35-50 70 95-120 150 185
Id. 6-8 10-12 14-16 18-20 22 25 28
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
45
Battery powered crimping tools Battery powered crimping tool „SO-6“
Hydraulic hand pliers „HO-6“ Crimping head can be rotated by 180°, manual return after completed pressing, light and compact construction in black plastic case, without dies. • Pressing force in kN: 60 • Working pressure in bar: 700 • Head can be opened • Opening / Hub: 17 mm • Pressing width: slim • Cable lugs: standard Cu 6-300 • DIN Cu 6-300 • DIN Al 16-240 • Connectors: standard Cu 6-300 • DIN Cu 6-300 • DIN Al 16-240 • Dual-piston pump • Weight in kg: 3,5 • Weight of set in kg: 5,0
Hydraulic for interchangeable dies, crimping head 180° swivelling, Head can be opened, manual return flow after perfect pressure. Extent of supply: 1 crimping tool, 1 charger, 2 batteries, 1 strap, in light plastic box, without dies. • Pressing force in kN: 60 kN • Working pressure in bar: 700 • Head can be opened yes • Opening/ Hub: 17 mm • Pressing width: slim • Cable lugs: standard Cu 6-300 • DIN Cu 6-300 • DIN Al 16-240 • Connectors: Cu 6-300 • DIN Cu 6-300 • DIN Al 16-240 • Pressing time, battery-operated in seconds: ca. 5 • Battery charging time in minutes: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Weight in kg without batterie: 2,9 • Weight of set in kg with batterie: 7,9
Art. no. 216802
Art. no. 216801
mm² 6-300
kg 7,900
PU 1
TL 600
mm² 6-300
kg 5
PU 1
Hydraulic hand pliers „MO-6“ for exchangeable dies Extent of supply: 1 crimping tool, in metal suitcase. • Crimping range cable lugs: Cu 6-300 • DIN Cu 6-300 / DIN Al 16-240 • Crimping range connectors: Cu 6-300 • DIN Cu 6-300 / DIN Al 16-240
Battery powered crimping tool „AO-6“ 2 step hydraulic for replaceable pressing dies, crimping head can be rotated by 180°, can be opened, with quick opening, manual return after completed pressing, LED to check battery status. Included in delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case, without dies. • Pressing force in kN: 60 • Working pressure in bar: 700 • Opening/ Hub: 17 mm • Head can be opened • Pressing width: slim • Cable lugs: standrad Cu 6-300 • DIN Cu 6-300 • DIN Al 16-240 • Connectors: standard Cu 6-300 • DIN Cu 6-300 • DIN Al 16-240 • Pressing time, battery-operated in seconds: 4 • Battery charging time in minutes: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Dual-piston pump • Weight in kg: 4,5 • Weight of set in kg: 9,5
Art. no. 216804
mm² 6-300
kg 11,800
PU 1
Crimping headstock „KO-6“ in plastic case, without dies. • Pressing force in kN: 60 • Working pressure in bar: 700 • Head can be opened • Opening/ Hub: 17 mm • Pressing width: slim • Cable lugs: standard Cu 6-300 • DIN Cu 6-300 • DIN Al 16-240 • Connectors: standard Cu 6-300 • DIN Cu 6-300 • DIN Al 16-240 • Quick coupling • Weight in kg: 3,2 • Weight of set in kg: 4,2
Art. no. 216807 Art. no. 216800
46
kg Size TL Ø
TL 330
mm² 6-300
Weight in kg Size in mm Total length Cross-section mm
kg 9,500
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
TL 180
mm² 6-300
kg 4,200
PU 1
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
PU 1
Dies Dies for aluminium cable lugs
Dies for terminals and connectors standard
Art. no. 216806 216808 216810 216812 216814 216816 216818 216820 216822 216824 216826 216828 216830
mm² 6 10 16 25 35 50 70 95 120 150 185 240 300
PB 5 5 5 5 5 5 5 5 5 5 5 5 5
kg 0,136 0,12 0,136 0,135 0,135 0,134 0,132 0,132 0,130 0,128 0,125 0,121 0,118
PU 1 1 1 1 1 1 1 1 1 1 1 1 1
Art. no. 216840/AL 216842/AL 216844/AL 216846/AL 216850/AL 216852/AL 216854/AL 216856/AL
Al 16-25 35 50 70 95-120 150 185 240
PB 7 7 7 7 7 7 7 5
Id. 12 14 16 18 22 25 28 32
kg 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120
PU 1 1 1 1 1 1 1 1
kg 0,120 0,146 0,153 0,162 0,171 0,167 0,160 0,164 0,174 0,162 0,124 0,119 0,089
PU 1 1 1 1 1 1 1 1 1 1 1 1 1
kg 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,240 0,197 0,120 0,120
PU 1 1 1 1 1 1 1 1 1 1 1
kg 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120
PU 1 1 1 1 1 1 1 1 1 1 1 1 1
Dies for tubular terminals „F-Type“
Dies for terminals and connectors DIN
Art. no. 216832 216834 216836 216838 216840 216842 216844 216846 216848 216850 216852 216854 216856
mm² 6 10 16 25 35 50 70 95 120 150 185 240 300
Al 16-25 35 50 70 95-120 150 185 240
PB 5 5 5 5 5 5 5 5 5 5 5 5 5
Id. 5 6 8 10 12 14 16 18 20 22 25 28 32
kg 0,123 0,122 0,125 0,120 0,120 0,119 0,120 0,120 0,120 0,120 0,120 0,115 0,120
PU 1 1 1 1 1 1 1 1 1 1 1 1 1
Dies for copper standard
Art. no. 216858 216860 216862 216864 216866 216868 216870 216872 216874
mm² 10 16 25 35 50 70 95 120 150
kg 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120
PU 1 1 1 1 1 1 1 1 1
Art. no. 216876 216878 216880 216882 216884 216886 216888 216890 216892 216894 216896 216898 216899
mm² 6 10 16 25 35 50 70 95 102 150 185 240 300
PB 8 8 9 11 13 13 13 13 20 20 8 8 8
Dies for rounding of square conductors
Art. no. 216926 216928 216930 216932 216934 216936 216938 216940 216942 216944 216946
sm 10 16 25 35 50 70 95 120 150 185 240
se 35 50 70 95 120 150 185 240 300
Dies for tubular terminals „Light T/M“
Dies for end sleeves
Art. no. 216950 216952 216954 216956 216958 216960 216962 216964 216966 216968 216970
mm² 6 10 16 25 35 50 70 95 120 150 185
kg 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120 0,120
PU 1 1 1 1 1 1 1 1 1 1 1
Art. no. 216900 216902 216904 216906 216908 216910 216912 216914 216916 216918 216920 216922 216924
mm² 6 10 16 25 35 50 70 95 120 150 185 240 300
PB 5 5 5 5 5 5 5 5 5 5 5 5 5
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
47
Battery powered crimping tools Battery powered crimping tool „AC25-12“
Battery powered crimping tool „TC25-12“
2 step hydraulic for replaceable pressing dies, crimping head can be rotated by 180°, can be opened, with quick opening, manual return after completed pressing, LED to check battery status. Included in delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case, without dies. • Pressing force in kN: 120 • Working pressure in bar: 700 • Opening/ Hub: 25 mm • Pressing width: wide • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-185 • DIN Cu 10-150 • DIN Al 16-120 • Pressing time, battery-operated in sec.: 6 - 12 • Battery charging time in min.: 60 • Battery type: NiMH, 14,4 V, 3 A • Dual-piston pump • Weight in kg: 7 • Weight of set in kg: 12
2 step hydraulic for replaceable pressing dies, crimping head can be rotated by 180°, can be opened, with quick opening, manual return after completed pressing, LED to check battery status. Included in delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case, without dies. • Pressing force in kN: 120 • Working pressure in bar: 700 • Opening/ Hub: 25 mm • Pressing width: wide • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-185 • DIN Cu 10-150 • DIN Al 16-120 • Pressing time, battery-operated in sec.: 6 - 12 • Battery charging time in min.: 60 • Battery type: NiMH, 14,4 V, 3 A • Dual-piston pump • Weight in kg: 7 • Weight of set in kg: 12
Art. no. 216601
48
TL 335
mm² 10-400
kg 12
PU 1
Art. no. 216620
TL 330
mm² 10-400
kg 12
PU 1
kg 4,600
PU 1
Hydraulic hand pliers „HC25-12“
Hydraulic crimping headstock „KC25-12“
Crimping head can be rotated by 180°, manual return after completed pressing, light and compact construction in black plastic case, without dies. • Pressing force in kN: 120 • Working pressure in bar: 700 • Opening/ Hub: 25 mm • Pressing width: wide • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-185 • DIN Cu 10-150 • DIN Al 16-120 • Dual-piston pump • Weight in kg: 6,2 • Weight of set in kg: 7,7
in plastic case, without dies. • Pressing force in kN: 120 • Working pressure in bar: 700 • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-185 • DIN Cu 10-150 • DIN Al 16-120 • Opening/ Hub: 25 mm • Pressing width: wide • Quick coupling • Weight in kg: 3,6 • Weight of set in kg: 4,6
Art. no. 216124
Art. no. 216004
kg Size TL Ø
TL 620
mm² 10-400
Weight in kg Size in mm Total length Cross-section mm
kg 7,700
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
PU 1
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
TL 185
NP Width Height Cu
mm² 10-400
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
Battery powered crimping tools Battery powered crimping tool „AC42-12“
Battery powered crimping tool „TC42-12“
2 step hydraulic for replaceable pressing dies, crimping head can be rotated by 180°, can be opened, with quick opening, manual return after completed pressing, LED to check battery status. Included in delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case, without dies. • Pressing force in kN: 120 • Working pressure in bar: 700 • Opening/ Hub: 42 mm • Pressing width: wide • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Pressing time, battery-operated in sec.: 7 - 13 • Battery charging time in min.: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Dual-piston pump • Weight in kg: 8,5 • Weight of set in kg: 13
2 step hydraulic for replaceable pressing dies, crimping head can be rotated by 180°, can be opened, with quick opening, manual return after completed pressing, LED to check battery status. Included in delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case, without dies. • Pressing force in kN: 120 • Working pressure in bar: 700 • Opening/ Hub: 42 mm • Pressing width: wide • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Pressing time, battery-operated in seconds: 7 - 13 • Battery charging time in minutes: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Dual-piston pump • Weight in kg: 8,5 • Weight of set in kg: 13
Art. no. 216624
TL 490
mm² 10-400
kg 13
PU 1
kg 6,300
PU 1
Hydraulic crimping headstock „KC42-12“ Art. no. 216622
TL 418
mm² 10-400
kg 13
PU 1
Hydraulic hand pliers „HC42-12“ Crimping head can be rotated by 180°, manual return after completed pressing, light and compact construction in black plastic case, without dies. • Pressing force in kN: 120 • Working pressure in bar: 700 • Opening/ Hub: 42 mm • Pressing width: wide • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Dual-piston pump • Weight in kg: 8,2 • Weight of set in kg: 9,7
in plastic case, without dies. Pressing force in kN: 120 • Working pressure in bar: 700 • Opening/ Hub: 42 mm • Pressing width: wide • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Quick coupling • Weight in kg: 5,3 • Weight of set in kg: 6,3
Art. no. 216005
Art. no. 216125
TL 640
mm² 10-400
kg 9,700
TL 250
mm² 10-400
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
49
Battery powered crimping tools Battery powered crimping tool „AH-12“
Crimping headstock „KH-12“
2 step hydraulic for replaceable pressing dies, crimping head can be rotated by 180°, can be opened, with quick opening, manual return after completed pressing, LED to check battery status. Included in delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case, without dies. • Pressing force in kN: 120 • Working pressure in bar: 700 • Head can be opened • Opening/ Hub: 20 mm • Pressing width: wide • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Pressing time, battery-operated in sec.: 6 - 13 • Battery charging time in minutes: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Dual-piston pump • Weight in kg: 7 • Weight of set in kg: 12
in plastic case, without dies. • Pressing force in kN: 120 • Working pressure in bar: 700 • Head can be opened • Opening/ Hub: 20 mm • Pressing width: wide • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Quick coupling • Weight in kg: 4 • Weight of set in kg: 5
Art. no. 215980
TL 185
mm² 10-400
kg 5
PU 1
kg 0,211 0,212 0,210 0,207 0,224 0,221 0,226 0,200 0,200 0,191 0,186 0,200
PU 1 1 1 1 1 1 1 1 1 1 1 1
kg 0,248 0,248 0,244 0,235 0,231 0,226 0,229 0,225 0,197 0,193 0,185 0,142
PU 1 1 1 1 1 1 1 1 1 1 1 1
Crimping dies Standard copper tube terminals and connectors, hexagonal press
Art. no. 216503
TL 300
mm² 10-400
kg 12
PU 1
Hydraulic hand pliers „HH-12“ Crimping head 180° swivelling, manual return flow after perfect pressure, in black metal suitcase, without dies. • Pressing force in kN: 120 • Working pressure in bar: 700 • Head can be opened • Opening/ Hub: 20 mm • Pressing width: wide • Cable lugs: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Connectors: standard Cu 10-400 • DIN Cu 10-300 • DIN Al 16-240 • Dual-piston pump • Weight in kg: 4,0 • Weight set in kg: 5,0
Art. no. 215946
50
kg Size TL Ø
TL 620
mm² 10-400
Weight in kg Size in mm Total length Cross-section mm
kg 7,500
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Art. no. 216008 216010 216012 216014 216016 216018 216020 216022 216024 216026 216028 216030
mm² 10 16 25 35 50 70 95 120 150 185 240 300
PB 10 10 10 13 13 14 14 14 11 11 11 11
Crimping dies DIN Cu + Al Standard copper tube terminals and connectors, hexagonal press
PU 1
Art. no. 216036 216038 216040 216042 216044 216046 216048 216050 216052 216054 216056 216060
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
mm² 10 16 25 35 50 70 95 120 150 185 240 300
NP Width Height Cu
PB 10 10 13 13 13 13 14 14 10 10 10 10
Al
16-25 35 50 70 95-120 150 185
Nominal pressure bar Width mm Height in mm Copper
crimp 10 16 25 16-25 35 50 70 120 95-120 150 185 185
Al CL PU
Id. 6 8 10 12 14 16 18 20 22 25 28 32
Aluminium Cutting length Packing unit/piece
Dies Crimping dies
Crimping dies
Standard copper tube terminals and connectors, mandrel shape crimping
for rounding of square conductors
Art. no. 216064 216066 216068 216070 216072 216074 216076 216078 216080 216082 216084 216086 216065 216067 216069 216071
mm² 10 16 25 35 50 70 95 120 150 185 240 300 10-25 35-50 70-120 150-300
kg 0,200 0,120 0,118 0,116 0,118 0,131 0,119 0,111 0,107 0,095 0,085 0,060 0,112 0,121 0,136 0,125
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Dies
Art. no. 216088 216090 216092 216094 216096 216098 216100
sm 50 70 95 120 150 185 240
se 70 95 120 150 185 240 300
kg 0,518 0,505 0,489 0,474 0,463 0,441 0,406
PU 1 1 1 1 1 1 1
kg 0,194 0,200 0,188 0,200 0,200
PU 1 1 1 1 1
kg 0,200 0,200 0,220 0,218 0,200 0,200 0,200 0,200 0,200
PU 1 1 1 1 1 1 1 1 1
kg 0,218 0,208 0,260 0,217 0,261
PU 1 1 1 1 1
Crimping dies for end sleeves, trapezoid crimping
Art. no. 216112 216114 216116 216118 216120
for aluminium DIN cable lugs
mm² 50 70 95 120 150 185 240
mm² 50 70 95 120 150
PB 26 26 26 26 26
Crimping dies Art. no. 216042/AL 216044/AL 216046/AL 216048/AL 216052/AL 216054/AL 216056/AL 216060/AL
PB 12 12 12 12 14 14 14 5
Al 16-25 35 50 70 95-120 150 185 240
Id. 12 14 16 18 22 25 28 32
kg 0,200 0,200 0,200 0,200 0,200 0,200 0,200 1,300
PU 1 1 1 1 1 1 1 1
kg 0,211 0,216 0,227 0,234 0,232 0,111 0,230 0,247 0,235 0,190
PU 1 1 1 1 1 1 1 1 1 1
Crimping dies tubular terminals and connectors, F-Type
Art. no. 216160 216162 216164 216166 216168 216170 216172 216174 216176 216178
mm² 10 16 25 35 50 50 95 120 150 185
PB 8 8 11 13 13 13 13 20 20 8
for insulated tube terminals, oval crimping
Art. no. 216126 216128 216130 216132 216134 216136 216138 216140 216142
mm² 10 16 25 35 50 70 95 120 150
PB 5 5 5 5 5 5 5 5 5
Crimping dies C-connectors, oval crimping
Art. no. 216148 216150 216152 216154 216156
mm² 16-25 35 50-70 95 120
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
51
Battery powered crimping tools Battery powered crimping tool „AD300-6“
Crimping headstock „KD300-6“
completed pressing, LED to check battery status, in plastic case, including quick charger, carry strap, no inserts necessary, mandrel shape pressing. Included in delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case. • Pressing force in kN: 60 • Working pressure in bar: 700 • Pressing width: thorn • Cable lugs: standard Cu 16-300 • Connectors: standard Cu 16-120 • Pressing time, battery-operated in sec.: 6 • Battery charging time in min.: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Weight in kg: 4,5 • Weight of set in kg: 9,5
in plastic case. • Pressing force in kN: 60 • Working pressure in bar: 700 • Pressing width: thorn • Cable lugs: standard Cu 16-300 • Connectors: standard Cu 16-120 • Quick coupling • Weight in kg: 2,8 • Weight of set in kg: 3,8
Art. no. 216665
TL 270
mm² 300
kg 3,800
PU 1
Battery powered crimping tool „AD400-6“ 2 step hydraulic, cimping head can be rotated by 360°, manual return after completed pressing, LED to check battery status, in plastic case, including quick charger, carry strap, no inserts necessary, mandrel shape pressing. Included in delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in plastic case. • Pressing force in kN: 60 • Working pressure in bar: 700 • Head can be opened • Pressing width: thorn • Cable lugs: standard Cu 25-400 • Connectors: standard Cu 25-400 • Pressing time, batteryoperated in sec.: 6 • Battery charging time in min.: 60 • Battery type: NiMH, 14,4 V, 3 Ah • Quick coupling • Weight in kg: 4,8 • Weight of set in kg: 9,8
Art. no. 216662
TL 360
mm² 10-300
kg 9,500
PU 1
Hydraulic hand pliers „HD300-6“ Crimping head can be rotated by 360°, manual return after completed pressing, light and compact construction in black plastic case. • Pressing force in kN: 60 • Working pressure in bar: 700 • Pressing width: thorn • Cable lugs: standard Cu 16-300 • Connectors: standard Cu 16-120 • Weight in kg: 5,0 • Weight of set in kg: 6,5
Art. no. 216664
Art. no. 216660
52
kg Size TL Ø
TL 560
mm² 16-300
Weight in kg Size in mm Total length Cross-section mm
kg 6,500
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
TL 360
mm² 400
kg 9,800
PU 1
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
NP Width Height Cu
Nominal pressure bar Width mm Height in mm Copper
Al CL PU
Aluminium Cutting length Packing unit/piece
PU 1
Battery powered crimping tools
Accessories
Hydraulic hand pliers „HD400-6“
Mains adapter
Crimping head can be rotated by 360°, manual return after completed pressing, light and compact construction in black plastic case. • Pressing force in kN: 60 • Working pressure in bar: 700 • Head can be opened • Pressing width: thorn • Cable lugs: standard Cu 25-400 • Connectors: standard Cu 25-400 • Weight in kg: 5,2 • Weight of set in kg: 6,7
for all 14.4 Volt battery tools
Art. no. 216252
kg 0,834
PU 1
kg 0,859
PU 1
kg 0,819
PU 1
kg 1
PU 1
Battery Art. no. 216661
TL 580
mm² 400
kg 6,700
PU 1
for all 14.4 Volt battery tools
Crimping headstock „HKD400“ in plastic case. • Pressing force in kN: 60 • Working pressure in bar: 700 • Head can be opened • Pressing width: thorn • Cable lugs: standard Cu 25-400 • Connectors: standard Cu 25-400 • Quick coupling • Weight in kg: 3 • Weight of set in kg: 4
Art. no. 216666
TL 280
mm² 25-400
Art. no. 215509
Quick charger
kg 4
PU 1
Art. no. 216253
Test pin Test pin for hydraulic four mandrel pressing tools
Hydraulic oil 0,5 l
Art. no. 216660/B
kg 0,566
PU 1
kg 0,566
PU 1
Art. no. 216254
Gauge for four mandrel pressing Gauge for hydraulic four mandrel pressing tools
Art. no. 216660/L
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
53
Hydraulic crimping headstocks Hydraulic crimping headstock „KH-25“
Hydraulic crimping headstock + cylinder „KH-45“
for uninsulated terminals 95 - 630 mm², pressure 250 kN, for crimping dies hexagon shape according to DIN 48083 page 3 and 4. • Pressing force in kN: 250 • Working pressure in bar: 700 • Opening/ Hub:Pin • Pressing width: wide • Pressing area Cu/Al: 95-630 • Dual-piston pump • Quick coupling • Weight in kg: 6,4 • Weight of set in kg: 9
for terminals and butt connectors to 1000 mm², together with an adapter it is possible to use all other crimping dies of the other crimping headstock, low weight in comparison to the crimping range, excellent price relation, snap head, extensionable system to bend and punch electric bus bars socket-joint connection. • Pressing force in kN: 450 • Working pressure in bar: 700 • Opening/ Hub: Pin • Pressing width: wide • Pressing area Cu/Al: 120-1000 • Quick coupling • Weight in kg: 10,3 • Weight of set in kg: 13,5
Art. no. 216236
TL 185
mm² 95-630
kg 9
PU 1
Crimping dies, DIN-connection, Cu hexagon crimping dies according DIN 48083 page 4 suitable for DIN-connection material according to DIN. Cu ze (free of tensile)
Art. no. 216355
TL 185
mm² 120-1000
kg 13,500
PU 1
kg 1 1,118 1,113 1,100 1,200 1,200 1,200 1,300
PU 1 1 1 1 1 1 1 1
Crimping dies, standard standard, WM crimping
Art. no. 212372 212376 212380 212382 212384 212388 212390 212392 212394 212396
Cu 95 120 150 185 240 300 400 500 630
Al 70 120 150 185 240 300 400 500
Id. 18 20 22 25 28 32 34 38 42 44
kg 1,194 2 1,700 1,300 1,300 1,300 1,300 1,300 1,300 1,113
PU 1 1 1 1 1 1 1 1 1 1
Hydraulic crimping headstock set Content: Art. No. 21 62 36 Hydraulic crimping headstock, Art. No. 21 62 38 Hydraulic high-pressure hose, 2 m, Art. No. 21 63 48 Hydraulic foot pump, Art. No. 21 62 51 Carrycase • Pressing force in kN: 250 • Working pressure in bar: 700 • Pressing width: wide • Pressing area Cu/Al: 95-630 • Dual-piston pump • Quick coupling • Weight in kg: 18,4 • Weight of set in kg: 21
Art. no. 216250
54
kg Size TL Ø
mm² 95-630
Weight in kg Size in mm Total length Cross-section mm
kg 21
mm² I/no. Length BL
Diameter in mm² Identification number Length in mm Blade length
CW RJ RG CSS
Art. no. 216304 216306 216308 216310 216312 216314 216316 216318
mm² 120 150 185 240 300 400 500 625
Crimping terminals and connectors, DIN DIN, hexagon crimping for crimping terminals and connectors DIN 46235 and for Al terminals and Al connectors
PU 1
Art. no. 216320 216322 216324 216326 216328 216330 216332 216334 216336 216338 216340
Cutting width Press zone modular plug Press zone coax. connector Conductor cross section
Cu Al 120 150 95/120 185 150 240 185 300 240 300 400 500 625 800 1000
NP Width Height Cu
Id. 20 22 25 28 32 34 38 42 44 52 58
Nominal pressure bar Width mm Height in mm Copper
kg 1,115 1,063 1,058 1,096 0,900 1,070 1,053 1,019 1,010 1,051 1,021
Al CL PU
Aluminium Cutting length Packing unit/piece
PU 1 1 1 1 1 1 1 1 1 1 1
Pumps for hydraulic crimping headstocks Hydraulic foot pump „F-700“
Battery-hydraulic pump „PA-700“
material: aluminium alloy, light design, twin-cam pump, automatic switching from closing (ca. 25 ccm/Hub) to working feed rate (ca. 2.5 ccm/Hub), security valve, max. working pressure 700 bar (+ 10/- 30 bar), without hose, with quick coupling
2 stage hydraulics, manual control switch, manual return flow after perfect pressure, LED for battery control, 1 quick charger, 2 batteries, carrying belt, max. operating pressure: 700 bar with 1,8 m hose, with quick coupling
Art. no. 216348
NP 700
kg 12
PU 1
Hydraulic high-pressure hose steel-reinforced with rapid coupling to foot pump Art. No. 216348
Art. no. 216354
NP 700
kg 6,600
PU 1
Elektro-hydraulic pump „PN-700“ Art. no. 216238 216240 216242 216244
TL 2 3 4 5
kg 0,950 1,100 1,600 2
PU 1 1 1 1
2 stage hydraulics, manual control switch, manual return flow after perfect pressure, carrying belt, max. operating pressure: 700 bar with 1,8 m hose, with quick coupling
Electro-hydraulic pump „PN700 l“ electric foot switch, completely self-acting, also the release of the dies at the end of the operation, 2 m high pressure tube and hydraulic connectors, for industrial uses, where a high level of production is needed, 220 volt, with foot switch control, pump in a practical, resistant case for working outside
Art. no. 216356
Art. no. 216352
NP 700
kg 41
NP 700
kg 10,420
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
55
Tool
Type
HH-6
SH-6
AH-6
KO-6
MO-6
HO-6
SO-6
A0-6
KD300-6
HD300-6
AD300-6
KD400-6
HD400-6
AD400-6
Artikle No.
215800
215881
215880
216807
216804
215802
215801
216800
216665
216660
216662
216666
216661
216664
300 O6
300 O6
300 O6
300 O6
300 O6
240 H6
240 H6
240 H6
Insert range
wide
-
wide
wide
wide
wide
-
slim
-
slim
-
-
slim
slim
-
-
slim
slim
-
-
Four mandrel crimping
slim
slim
Pressing width
60
60
60
60
60
60
60
60
60
60
60
60
60
60
Pressing force kN
700
700
700
700
700
700
700
700
700
700
700
700
700
700
Working pressure in bar
-
-
-
Head can be opened
-
-
-
-
-
-
-
-
-
-
-
Quick coupling
-
-
-
-
-
-
17
17
17
17
17
17
17
17
HUB/ opening mm
25 - 400
25 - 400
25 - 400
16 - 300
16 - 300
16 - 300
6 - 300
6 - 300
6 - 300
6 - 300
6 - 300
10 - 240
10 - 240
10 - 240
Cu
-
-
-
-
-
-
6 - 300
6 - 300
6 - 300
6 - 300
6 - 300
10 - 240
10 - 240
10 - 240
Cu DIN
25 - 400
25 - 400
25 - 400
16 - 240
16 - 240
16 - 240
6 - 300
6 - 300
6 - 300
6 - 300
6 - 300
-
-
-
F-Type
-
-
-
-
-
-
6 - 240
6 - 240
6 - 240
6 - 240
6 - 240
16 - 185
16 - 185
16 - 185
Al DIN
25 - 400
25 - 400
25 - 400
16 - 300
16 - 300
16 - 300
6-300
6 - 300
6 - 300
6 - 300
6 - 300
10 - 240
10 - 240
10 - 240
CU standard PL
Pressing range for cable lugs
6 tonne pressing tools
25 - 400
25 - 400
25 - 400
16 - 300
16 - 300
16 - 300
6 - 300
6 - 300
6 - 300
6 - 300
6 - 300
-
-
-
CU standard light T
25 - 400
25 - 400
25 - 400
16 - 120
16 - 120
16 - 120
6 - 300
6 - 300
6 - 300
6 - 300
6 - 300
10 - 240
10 - 240
10 - 240
Cu
25 - 400
25 - 400
25 - 400
16 - 300
16 - 300
16 - 300
6 - 300
6 - 300
6 - 300
6 - 300
6 - 300
10 - 240
10 - 240
10 - 240
Cu DIN
25 - 400
25 - 400
25 - 400
16 - 95
16 - 95
16 - 95
6 - 300
6 - 300
6 - 300
6 - 300
6 - 300
-
-
-
F-Type
-
-
-
-
-
-
6 - 240
6 - 240
6 - 240
6 - 240
6 - 240
16 - 185
16 - 185
16 - 185
Al DIN
25 - 400
25 - 400
25 - 400
16 - 120
16 - 120
16 - 120
6 - 300
6 - 300
6 - 300
6 - 300
6 - 300
10 - 240
10 - 240
10 - 240
Cu standard PL
Pressing range for connectors
25 - 400
25 - 400
25 - 400
16 - 120
16 - 120
16 - 120
6 - 300
6 - 300
6 - 300
6 - 300
6 - 300
-
-
-
Cu standard light M
-
-
-
-
-
-
Dual piston pump
4,800
5,200
3,000
4,500
5,000
2,800
4,500
2,400
3,500
8,100
3,200
3,500
2,400
3,000
kg
9,800
6,700
4,000
9,500
6,500
3,800
9,500
7,900
5,000
11,800
4,200
8,500
7,900
4,500
Set kg
6
14,4 V 3 Ah
4
14,4 V 3 Ah
-
6
-
14,4 V 3 Ah
-
6
14,4 V 3 Ah
-
-
-
-
5
14,4 V 3 Ah
-
-
-
-
-
-
5
14,4 V 3 Ah
-
-
Pressing time in sec.
-
Akku NiMH
Tool
Type
KC25-12
HC25-12
AC25-12
TC25-12
KC42-12
HC42-12
AC42-12
TC42-12
KH-12
HH-12
AH-12
KH-25
KH-45
Artikle No.
216004
216124
216601
216620
216005
216125
216622
216624
215980
215946
216503
216236
216335
120
120
wide
wide
120
120
wide
wide
wide
wide
400 C12
630 H250
1000 H450
400 C12
450
250
120
400 C12
wide
120
120
120
120
wide
wide
wide
120
120
wide
wide
Pressing force kN
Pressing width
wide
400 C12
400 C12
400 C12
400 C12
400 C12
400 C12
400 C12
400 C12
Insert range
700
700
700
700
700
700
700
700
700
700
700
700
700
Working pressure in bar
-
-
-
-
-
-
-
-
Head can be opened
-
-
-
-
-
-
-
-
Quick coupling
-
20
20
20
20
42
42
42
42
25
25
25
25
HUB/opening mm
120 - 625
-
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
Cu
-
-
120 1000
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
F-Type
95 - 630
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
Cu DIN
-
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
95 - 300 120 - 625
70 - 500
16 - 240
16 - 240
16 - 240
16 - 240
16 - 240
16 - 240
16 - 240
16 - 240
16 - 240
16 - 240
16 - 240
Al DIN
CU standard PL
Pressing range for cable lugs
-
-
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
CU standard light T
12 tonne pressing tools
120 - 625
-
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 185
10 - 185
10 - 185
10 - 185
Cu
120 1000
95 - 630
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 150
10 - 150
10 - 150
10 - 150
Cu DIN
-
-
10-300
10-300
10-300
10-300
10-300
10-300
10-300
10 - 150
10 - 150
10 - 150
10 - 150
F-Type
120 - 625
70 - 500
16 - 240
16 - 240
16 - 240
16 - 240
16 - 240
16 - 240
16 - 240
16 - 120
16 - 120
16 - 120
16 - 120
Al DIN
-
-
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 400
10 - 185
10 - 185
10 - 185
10 - 185
Cu standard PL
Pressing range for connectors
-
-
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 300
10 - 150
10 - 150
10 - 150
10 - 150
Cu standard light M
-
-
-
-
-
-
-
-
-
-
Groove pressing
-
-
-
-
-
Dual piston pump
10,300
6,400
7,000
6,000
4,000
8,500
8,500
8,200
5,300
7,000
7,000
6,200
3,600
kg
13,500
9,000
12,000
7,500
5,000
13,000
13.000
9,700
6,300
12,000
12,000
7,700
4,600
Set kg
6
14,4 V 3 Ah
7
14,4 V 3 Ah
-
-
-
6
14,4 V 3 Ah
-
-
-
-
7
14,4 V 3 Ah
-
-
-
-
6
14,4 V 3 Ah
-
-
-
Pressing time in sec.
-
-
Akku NiMH
-
on request
6 - 185
50 - 150
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10 - 95
35 - 240
RG58 RG59 RG62 RG71
-
0,1 - 6
-
-
-
-
-
-
-
0,1 - 6
-
-
-
10 - 300
10 - 150
on request
0,5 - 16
0,5 - 10
DIN 46234
10 - 300
on request
-
-
-
-
-
6 - 300
on request
-
-
0,5 - 16
-
on request
10 - 16
10 - 16
light T/M
-
-
-
10 - 300
6 - 300
10 - 240
0,5 - 16
-
standard
Series of dies
-
-
-
10 - 150
on request
on request
-
-
-
-
-
10 - 185
6 - 300
-
-
-
F-Type
-
-
120 1000
-
-
on request
on request
-
1 - 16
-
Ni
70 - 630
10 - 300
6 - 300
10 - 240
-
-
DIN CU
-
95 - 300
95 - 500
16 - 240
16 - 240
10 - 185
-
-
-
120 - 625
-
10 - 400
10 - 400
10 - 240
-
-
-
95 - 300
95 - 500
16 - 240
16 - 240
10 - 185
-
-
PL Al/Cu DIN Al standard Al standard
-
95 - 300
95 - 500
16 - 240
16 - 240
10 - 185
-
-
Al/Cu DIN
35 - 240
-
-
-
-
-
-
-
Al/Cu standard
Around the cable
End sleeves
... convincing solutions
End sleeves End sleeves • of electrolytic copper, bare • Dimensions to DIN 46228, Part 1
Art. no. 270141 270140 270140/500 270142 270142/500 270143 270143/500 270144 270146 270146/500 270148 270148/500 270149 270149/500 270150 270150/500 270152 270152/500 270154 270154/500 270156 270156/500 270158 270158/500 270159 270159/500 270160 270160/500 270164 270164/500 270166 270166/500 270168 270168/500 270170 270172 270174 270176 270178 270180 270182 270184 270186 270188 270190 270192 270194 270195 270196 270198
60
kg/100 I TL CSS
CSS 0,34 0,5 0,75
1
1,5
2,5
4
6
10 16 25 35
d1 0,85 1,0 1,0 1,2 1,2 1,2 1,2 1,2 1,4 1,4 1,4 1,4 1,4 1,4 1,7 1,7 1,7 1,7 1,7 1,7 1,7 1,7 2,5 2,5 2,5 2,5 2,5 2,5 2,8 2,8 2,8 2,8 2,8 2,8 3,5 3,5 3,5 3,5 4,5 4,5 4,5 5,8 5,8 5,8 7,3 7,3 8,3 8,3 8,3 8,3
Weight in kg/100 Length Total length Conductor cross section
d2 1,8 2,1 2,1 2,3 2,3 2,3 2,3 2,3 2,5 2,5 2,5 2,5 2,5 2,5 2,8 2,8 2,8 2,8 2,8 2,8 2,8 2,8 3,4 3,4 3,4 3,4 3,4 3,4 4,0 4,0 4,0 4,0 4,0 4,0 4,7 4,7 4,7 4,7 5,8 5,8 5,8 7,5 7,5 7,5 9,5 9,5 11,0 11,0 11,0 11,0
IN B c c1
s 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2
kg/100 0,003 0,004 0,002 0,005 0,003 0,005 0,005 0,007 0,005 0,004 0,007 0,006 0,009 0,009 0,005 0,005 0,009 0,008 0,012 0,009 0,014 0,014 0,008 0,010 0,013 0,013 0,012 0,011 0,018 0,014 0,019 0,018 0,030 0,030 0,020 0,022 0,034 0,034 0,028 0,054 0,068 0,045 0,057 0,059 0,058 0,080 0,114 0,108 0,100 0,110
TL 5 6 6 6 6 10 10 12 6 6 10 10 12 12 7 7 10 10 12 12 18 18 7 7 10 10 12 12 9 9 12 12 18 18 10 12 15 18 12 15 18 12 15 18 12 18 18 20 22 26
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
PU 1000 1000 500 1000 500 1000 500 1000 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 250 250 250 250 250 250 250 250 250 250 250 250 100 100 100 100
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
End sleeves End sleeves • of electrolytic copper, tin-plated • Dimensions to DIN 46228, Part 1
Art. no. 270066 270066/500 270068 270068/500 270070 270070/500 270072 270072/500 270074 270074/500 270076 270078 270078/500 270079 270079/500 270080 270082 270082/500 270084 270084/500 270086 270086/500 270087 270088 270089 270089/500 270090 270090/500 270091 270091/500 270092 270092/500 270093 270093/500 270094 270096 270097 270098 270100 270102 270104 270106 270107 270108 270110 270112 270114 270116 270118 270119 270120 270121 270122 270123 270124 270126 270128 270130 270131 270132 270134 270135 270136 270137
CSS 0,25 0,34 0,5 0,75
1
1,5
2,5
4
6
10 16
25
35
50 70 95 120 150 185
d1 0,75 0,75 0,85 0,85 1,0 1,0 1,2 1,2 1,2 1,2 1,4 1,4 1,4 1,4 1,4 1,7 1,7 1,7 1,7 1,7 1,7 1,7 1,7 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,8 2,8 2,8 2,8 3,5 3,5 3,5 3,5 3,5 4,5 4,5 4,5 5,8 5,8 5,8 5,8 7,3 7,3 7,3 7,3 8,3 8,3 8,3 8,3 10,3 12,5 14,5 16,5 18,5 20,0
d2 1,7 1,7 1,8 1,8 2,1 2,1 2,3 2,3 2,3 2,3 2,5 2,5 2,5 2,5 2,5 2,8 2,8 2,8 2,8 2,8 2,8 2,8 2,8 3,4 3,4 3,4 3,4 3,4 3,4 3,4 3,4 3,4 3,4 3,4 4,0 4,0 4,0 4,0 4,7 4,7 4,7 4,7 4,7 5,8 5,8 5,8 7,5 7,5 7,5 7,5 9,5 9,5 9,5 9,5 11,0 11,0 11,0 11,0 13,0 15,0 17,0 19,0 21,0 23,5
s 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,0 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,3 0,4 0,4 0,5 0,5 0,6
TL 5 5 5 5 6 6 6 6 12 12 6 10 10 12 12 7 10 10 12 12 18 18 20 7 10 10 12 12 15 15 18 18 20 20 9 12 15 18 10 12 15 18 20 12 15 18 12 15 18 24 12 15 18 25 18 22 25 30 22 25 30 32 38 40
kg/100 0,003 0,002 0,003 0,001 0,003 0,003 0,003 0,003 0,007 0,003 0,004 0,007 0,003 0,008 0,004 0,006 0,009 0,005 0,010 0,005 0,010 0,010 0,018 0,008 0,017 0,017 0,011 0,011 0,015 0,015 0,023 0,023 0,020 0,020 0,015 0,020 0,024 0,030 0,020 0,024 0,031 0,036 0,040 0,032 0,039 0,045 0,044 0,056 0,068 0,104 0,063 0,075 0,085 0,121 0,112 0,132 0,143 0,155 0,202 0,259 0,500 0,660 0,529 1,350
PU 1000 500 1000 500 1000 500 1000 500 1000 500 1000 1000 500 1000 500 1000 1000 500 1000 500 1000 500 1000 1000 1000 500 1000 500 1000 500 1000 500 1000 500 1000 1000 1000 1000 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 100 100 100 100 100 100 100 50 50 50 25
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
61
End sleeves End sleeves DIN colour range • insulated • Electrolytic copper, tin-plated • Dimensions to DIN 46228. Part 4 • DIN colour range III Art. no. 270800 270801 270802 270803 270804 270805 270806 270807 270808 270810 270811 270812 270813 270814 270815 270816 270818 270820 270822 270824 270826 270828 270830 270832 270834 270836 270838 270840 270842 270844
CSS 0,5 white white 0,75 grey grey 1 red red red 1,5 black black 2,5 blue blue blue blue 4 grey grey grey 6 yellow yellow 10 red red 16 blue blue 25 yellow yellow yellow 35 red red red 50 blue blue
d1 1,1 1,1 1,25 1,25 1,5 1,5 1,5 1,7 1,7 2,3 2,3 2,3 2,3 2,9 2,9 2,9 3,6 3,6 4,6 4,6 6,0 6,0 7,3 7,3 7,3 8,3 8,3 8,3 10,3 10,3
d2 3,1 3,1 3,3 3,3 3,5 3,5 3,5 4,0 4,0 4,9 4,9 4,9 4,9 5,6 5,6 5,6 7,0 7,0 8,4 8,4 9,6 9,6 12,0 12,0 12,0 13,5 13,5 13,5 15,0 15,0
s 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,3 0,3
TL 14,0 14,0 14 14 14,6 14,6 18 14,6 14,6 15,0 15,0 16,5 25,0 17,7 17,7 25,7 20 26 21,5 27,5 22,2 28,2 30 32 36 30 32 39 36 40
l 8 8 8 8 8 8 12 8 8 8 8 10 18 10 10 18 12 18 12 18 12 18 16 18 22 16 18 25 20 25
kg/100 0,010 0,009 0,009 0,013 0,014 0,009 0,013 0,013 0,014 0,020 0,017 0,018 0,030 0,030 0,030 0,040 0,045 0,055 0,057 0,072 0,082 0,103 0,142 0,152 0,168 0,168 0,178 0,218 0,344 0,404
PU 100 500 500 100 100 500 500 500 100 100 500 500 500 100 500 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50
End sleeves in tape form, to DIN 46228 P. 4 • insulated • Copper/plastic, tin-plated surface • DIN color range III
Art. no. 272250 272254 272260 272264 272268
CSS 0,5 0,75 1,0 1,5 2,5
l 8 8 8 8 8
white grey red black blue
coils Ø 250 mm Ø 250 mm Ø 250 mm Ø 250 mm Ø 250 mm
kg/100 0,010 0,030 0,010 0,010 0,010
PU 3000 3000 3000 2500 1500
dispenser 150x150x18 mm 150x150x18 mm 150x150x18 mm 150x150x18 mm 150x150x18 mm
kg/100 0,070 0,100 0,120 0,120 0,140
PU 1000 1000 1000 1000 500
End sleeves in tape form, to DIN 46228 P. 4 • insulated • Copper/plastic, tin-plated surface
Art. no. 272280 272284 272290 272294 272298
62
kg/100 I TL CSS
CSS 0,5 0,75 1 1,5 2,5
l 8 8 8 8 8
white grey red black blue
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
End sleeves End sleeves, colour range I, (french) • insulated • Electrolytic copper, tin-plated • Dimensions to DIN 46228. Part 4 • Colour range I, french Art. no. 270014 270015 270016 270800 270801 270021 270022 270804 270805 270808 270027 270028 270029 270030 270031 270032 270033 270034 270036 270038 270040 270042 270044 270046 270048 270049 270050
CSS 0,25 yellow yellow 0,34 green 0,5 white white 0,75 blue blue 1 red red 1,5 black black black 2,5 grey grey grey grey 4 orange orange orange 6 green green 10 brown brown 16 ivory ivory 25 black black
d1 0,8 0,8 0,8 1,1 1,1 1,25 1,25 1,5 1,5 1,7 1,7 1,7 2,3 2,3 2,3 2,3 2,9 2,9 2,9 3,6 3,6 4,6 4,6 6,0 6,0 7,3 7,3
d2 2,3 2,3 2,5 3,1 3,1 3,3 3,3 3,5 3,5 4,0 4,0 4,0 4,9 4,9 4,9 4,9 5,6 5,6 5,6 7,0 7,0 8,4 8,4 9,6 9,6 12,0 12,0
s 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2
TL 10,4 10,4 12,4 14,0 14,0 14,5 14,5 14,6 14,6 14,6 24,4 24,4 15,0 15,0 21 21 17,7 17,7 25,7 20 26 21,5 27,5 24,2 28,2 30,0 32,0
l 6 6 6 8 8 8 8 8 8 8 18 18 8 8 18 18 10 10 18 12 18 12 18 12 18 16 18
kg/100 0,005 0,023 0,022 0,010 0,009 0,021 0,021 0,014 0,009 0,014 0,022 0,022 0,020 0,020 0,028 0,028 0,029 0,029 0,040 0,043 0,065 0,046 0,073 0,081 0,103 0,070 0,079
PU 100 500 500 100 500 100 500 100 500 100 100 500 100 500 100 500 100 500 100 100 100 100 100 100 100 50 50
d2 2,3 2,3 2,5 3,1 3,1 3,3 3,3 3,5 3,5 4,0 4,0 4,0 4,0 4,9 4,9 4,9 4,9 5,6 5,6 5,6 7,0 7,0 8,4 8,4 9,6 9,6 11,2 12,7 12,7 15,0 15,0 17,2
s 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,3 0,3 0,4
TL 10,4 10,4 10,4 14,0 14,0 14,6 14,6 14,6 14,6 14,6 14,6 24,4 24,4 15,0 15,0 25,0 25,0 17,7 17,7 25,7 20,0 26,0 21,5 27,5 22,2 28,2 29,0 30,0 39,0 36,4 41,0 37,0
l 6 6 6 8 8 8 8 8 8 8 8 18 18 8 8 18 18 10 10 18 12 18 12 18 12 18 16 16 25 20 25 21
kg/100 0,007 0,005 0,005 0,010 0,009 0,012 0,011 0,013 0,011 0,015 0,013 0,023 0,023 0,020 0,017 0,030 0,030 0,030 0,030 0,040 0,050 0,062 0,066 0,081 0,080 0,104 0,132 0,170 0,400 0,328 0,300 0,536
PU 100 500 500 100 500 100 500 100 500 100 500 100 500 100 500 500 500 100 500 100 100 100 100 100 100 100 50 50 25 25 25 25
End sleeves, colour range II, (german) • insulated • Electrolytic copper, tin-plated • Colour range II, german
Art. no. 270714 270715 270716 270719 270720 270721 270722 270723 270724 270725 270726 270727 270728 270810 270811 270813 270732 270814 270815 270816 270738 270740 270742 270744 270746 270748 270750 270754 270756 270758 270760 270762
CSS 0,25 light blue light blue 0,34 emerald 0,5 orange orange 0,75 white white 1 yellow yellow 1,5 red red red red 2,5 blue blue blue blue 4 grey grey grey 6 black black 10 ivory ivory 16 green green 25 brown 35 beige beige 50 olive olive 70 yellow
d1 0,8 0,8 0,8 1,1 1,1 1,25 1,25 1,5 1,5 1,7 1,7 1,7 1,7 2,3 2,3 2,3 2,3 2,9 2,9 2,9 3,6 3,6 4,6 4,6 6,0 6,0 7,3 8,3 8,3 10,3 10,3 13,5
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
63
End sleeves End sleeves for short-circuit-proof cables • for short-circuit-proof cables with extra thick insulation (NSFGAFÖU) Application: Infeed or branches in front of mains switch, in switching stations, distributors or with rail vehicles, solar heating units, ignition cables Art. no. 270900 270902 270904 270906 270908 270910 270912 270914
CSS 1,5 black black 2,5 blue blue 4 grey 6 yellow 10 red 16 blue
d1 1,8 1,8 2,3 2,3 2,9 3,8 4,5 6,0
d2 6,8 6,8 7,8 7,8 7,8 7,3 9,8 12,2
l 8 10 8 12 10 12 12 12
kg/100 0,026 0,024 0,033 0,360 0,046 0,062 0,081 0,107
PU 100 100 100 100 100 100 100 100
Twin-end sleeves two cables DIN • tube section of electrolytic copper • galvanically tin-plated • plastic collar of PP • heat-resistant to 105°C
Art. no. 270778 270780 270782 270784 270787 270788 270790 270792 270794 270796 270797 270798 270799
CSS 0,5 white 0,75 grey grey 1 red red 1,5 black black 2,5 blue blue 4 grey 6 yellow 10 red 16 blue
d1 1,5 1,8 1,8 2,05 2,05 2,3 2,3 2,9 2,9 3,8 4,9 6,5 8,3
s 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,2 0,2 0,2 0,2 0,2 0,2
TL 15 15 17 15 17 16 20 18,5 21,5 23 25 26 31
l 8 8 10 8 10 8 12 10 13 14 14 14 16
kg/100 0,011 0,013 0,014 0,014 0,015 0,017 0,022 0,029 0,033 0,049 0,072 0,090 0,078
PU 100 100 100 100 100 100 100 100 100 100 100 100 50
s 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,2 0,2 0,2 0,2 0,2 0,2
TL 15 15 17 15 17 16 20 18,5 21,5 23 25 26 31
l 8 8 10 8 10 8 12 10 13 12 14 14 16
kg/100 0,031 0,031 0,031 0,031 0,031 0,031 0,031 0,029 0,029 0,049 0,031 0,031 0,031
PU 100 100 100 100 100 100 100 100 100 100 100 100 50
Twin-end sleeves, colour range I (french) • insulated • Electrolytic copper, tin-plated • Dimensions to DIN 46228. Part 4 • Colour range I, french Art. no. 273350 273352 273354 273356 273358 273360 273362 273392 273394 273396 273364 273366 273368
64
kg/100 I TL CSS
CSS 0,5 orange 0,75 white white 1 yellow yellow 1,5 red red 2,5 blue blue 4 grey 6 black 10 ivory 16 green
Weight in kg/100 Length Total length Conductor cross section
d1 1,5 1,8 1,8 2,05 2,05 2,3 2,3 2,9 2,9 3,8 4,9 6,5 8,3
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Assortments of end sleeves Empty dispenser box
Dispenser box with Twin end sleeves (DIN) Contents: 50 pcs. grey, 0.75 mm², art. 270780 50 pcs. red, 1.0 mm², art. 270784 50 pcs. black, 1.5 mm², art. 270788 50 pcs. blue, 2.5 mm², art. 270792
Art. no. 270870
kg 0,049
PU 1
Dispenser box with uninsulated end sleeves
kg 0,240
PU 1
Art. no. 270852
kg 0,089
PU 1
kg 0,087
PU 1
kg 0,090
PU 1
Dispenser box with insulated end sleeves (german)
Contents: tín-plated end sleeves 200 pcs. 4 mm², art. 270094 100 pcs. 6.0 mm², art. 270102 50 pcs. 10.0 mm², art. 270108 50 pcs. 16.0 mm², art. 270114
Contents: Colour range II 50 pcs. grey, 4 mm², art. 270814 20 pcs. black, 6 mm², art. 270738 20 pcs. ivory, 10 mm², art. 270742 10 pcs. green, 16 mm², art. 270746
kg 0,158
PU 1
Dispenser box with insulated end sleeves (DIN)
Art. no. 270856
Dispenser box with insulated end sleeves (french)
Contents: Colour range III, DIN 50 pcs. white, 0.5 mm², art. 270800 100 pcs. grey, 0.75 mm², art. 270802 100 pcs. red, 1.0 mm², art. 270804 100 pcs. black, 1.5 mm², art. 270807 50 pcs. blue, 2.5 mm², art. 270810
Art. no. 270854
PU 1
Contents: Colour range II 50 pcs. orange, 0.5 mm², art. 270719 100 pcs. white, 0.75 mm², art. 270721 100 pcs. yellow, 1.0 mm², art. 270723 100 pcs. red, 1.5 mm², art. 270725 50 pcs. blue, 2.5 mm², art. 270810
Dispenser box with uninsulated end sleeves
Art. no. 270218
kg 0,080
Dispenser box with insulated end sleeves (german)
Contents: tín-plated end sleeves 700 pcs. 0.5 mm², art. 270070 1000 pcs. 0.75 mm², art. 270072 800 pcs. 1.0 mm², art. 270076 500 pcs. 1.5 mm², art. 270080 450 pcs. 2.5 mm², art. 270088
Art. no. 270217
Art. no. 270795
Contents: Colour range I 50 pcs. white, 0.5 mm², art. 270800 100 pcs. blue, 0.75 mm², art. 270021 100 pcs. red, 1.0 mm², art. 270804 100 pcs. black, 1.5 mm², art. 270808 50 pcs. grey, 2.5 mm², art. 270029
kg 0,090
PU 1
kg 0,089
PU 1
Art. no. 270850
Dispenser box with insulated end sleeves (DIN) Contents: Colour range III, DIN 50 pcs. grey, 4 mm², art. 270815 20 pcs. yellow, 6 mm², art. 270818 20 pcs. red, 10 mm², art. 270822 10 pcs. blue, 16 mm², art. 270826
Art. no. 270858
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
65
Assortments of end sleeves Slide Box with DIN end sleeves
End sleeve assortment
The transparent sliding lids enable easy access and prevent the contents from becoming mixed up. Product features: Handy plastic box with Euro holes, 5 separate compartments, simple access through sliding lids, no mixing of contents. Dimensions: 165 x 58 x 38 mm (L x W x H)
Contents: end sleeves, tin-plated 1000 End sleeves 6 mm x 0.75 mm², art. 270072 1000 End sleeves 6 mm x 1.0 mm², art. 270076 1000 End sleeves 7 mm x 1.5 mm², art. 270080 500 End sleeves 7 mm x 2.5 mm², art. 270088 500 End sleeves 9 mm x 4.0 mm², art. 270094 500 End sleeves 10 mm x 6.0 mm², art. 2 0100 1 crimping pliers (Art. 210763), press range 0.5 - 4.0 mm² in plastic bulk storage chest 420 x 350 x 60 mm
Contents: Colour range III DIN 50 pcs white, 0.5 mm², art. 270800 DIN 100 pcs. grey, 0.75 mm², art. 270802 100 pcs. red, 1.0 mm², art. 270804 100 pcs. black, 1.5 mm², art. 270807 50 pcs. blue, 2.5 mm², art. 270810
Art. no. 270864
kg 0,109
PU 1
Slide Box with DIN TWIN end sleeves Contents: 50 pcs. white, 2 x 0,5 mm², art. 270778 50 pcs. grey, 2 x 0.75 mm², art. 270780 50 pcs. red, 2 x 1.0 mm², art. 270784 50 pcs. black, 2 x 1.5 mm², art. 270788 25 pcs. blue, 2 x 2.5 mm², art. 270792
Art. no. 270041
Content 4500
kg 2,500
PU 1
Assortments of wire-end sleeves Contents: 5.000 insulated wire-end sleeves, 1 crimping pliers (210804), crimping range 0.75 – 10 mm² in plastic bulk storage chest 420 x 350 x 60 mm.
Art. no. 270866
kg 0,104
PU 1
End sleeve assortment Contents: end sleeves, tin-plated, 1 crimping pliers (art. 210824), pressing range 0.75 - 16.0 mm², in plastic bulk storage chest 420 x 350 x 60 mm. 1000 End sleeves 6 mm x 0.75 mm², art. 270072 1000 End sleeves 6 mm x 1.0 mm², art. 270076 1000 End sleeves 7 mm x 1.5 mm², art. 270080 500 End sleeves 7 mm x 2.5 mm², art. 270088 500 End sleeves 9 mm x 4.0 mm², art. 270094 500 End sleeves 10 mm x 6.0 mm², art. 270100 250 End sleeves 18 mm x 10.0 mm², art. 270112 250 End sleeves 18 mm x 16.0 mm², art. 270118
100 Twin end sleeves 8/0,5, white, art. 270778 100 Twin end sleeves 8/0,75, grey, art. 270780 100 Twin end sleeves 8/1, red, art. 270784 100 Twin end sleeves 8/1,5, black, art. 270788 100 Twin end sleeves 10/2,5, blue, art. 270792 100 Twin end sleeves 12/4,0, grey, art. 270796 100 Twin end sleeves 14/6,0, yellow, art. 270797 500 insulated end sleeves 8/0,5, white, art. 270801 500 insulated end sleeves 8/0,75, grey, art. 270802 1.000 insulated end sleeves 8/1, red, art. 270805 1.000 insulated end sleeves 8/1,5, black, art. 270807 500 insulated end sleeves 8/2,5, blue, art. 270811 500 insulated end sleeves 10/4, grey, art. 270815 200 insulated end sleeves 12/6, yellow, art. 270818 200 insulated end sleeves 12/10, red, art. 270822
Art. no. 270888 270890
Art. no. 270039
66
kg/100 I TL CSS
Content 5000
Weight in kg/100 Length Total length Conductor cross section
kg 2,580
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Content 5000 5000
type DIN II
kg 2,150 2,150
PU 1
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
PU 1 1
Assortments of end sleeves Assortments of wire-end sleeves
End sleeve assortment – serie DIN
Content: 5.300 insulated wire-end sleeves, 1 crimping pliers (210842), crimping range 1 – 10 mm², in plastic bulk storage chest 420 x 350 x 60 mm.
Content: 4.700 insulated end sleeves, in plastic bulk storage chest 420 x 350 x 60 mm.
1.000 insulated end sleeves 8/1, red, art. 270805 1.000 insulated end sleeves 8/1,5, black, art. 270807 1.000 insulated end sleeves 8/2,5, blue, art. 270811 500 insulated end sleeves 10/4, grey, art. 270815 200 insulated end sleeves 12/6, yellow, art. 270818 200 insulated end sleeves 12/10, red, art. 270822 500 insulated end sleeves 12/1, red, art. 270806 300 insulated end sleeves 18/1,5, black, art. 270027 250 insulated end sleeves 18/2,5, blue, art. 270813 200 insulated end sleeves 18/4, grey, art. 270816 100 insulated end sleeves 18/6, yellow, art. 270820 50 insulated end sleeves 18/10, red, art. 270824
100 Twin end sleeves 8/0,5, white, art. 270778 100 Twin end sleeves 8/0,75, grey, art. 270780 100 Twin end sleeves 8/1, red, art. 270784 100 Twin end sleeves 8/1,5, black, art. 270788 100 Twin end sleeves 10/2,5, blue, art. 270792 100 Twin end sleeves 12/4, grey, art. 270796 100 Twin end sleeves 14/6, yellow, art. 270797 100 Twin end sleeves 14/10, red, art. 270798 500 insulated end sleeves 8/0,5, white, art. 270801 500 insulated end sleeves 8/0,75, grey, art. 270802 500 insulated end sleeves 8/1, red, art. 270805 1000 insulated end sleeves 8/1,5, black, art. 270807 500 insulated end sleeves 8/2,5, blue, art. 270811 500 insulated end sleeves 10/4, grey, art. 270815 200 insulated end sleeves 10/6, yellow, art. 270818 200 insulated end sleeves 12/10, red, art. 270822
Art. no. 270891 270892 270893
Content 5300 5300 5300
type DIN I II
kg 2,100 2,100 2,100
PU 1 1 1
Art. no. 270899
Content: 1 crimping pliers (210784) for insulated terminals 0,5 - 2,5 mm² and end sleeves 0,5 - 6 mm², 2.700 insulatet end sleeves, 1.100 insulatet terminals in plastic bulk storage chest 420 x 350 x 60 mm. 500 insulated end sleeves 0,5/8, white, art. 270801 500 insulated end sleeves 0,75/8, grey, art. 270802 500 insulated end sleeves 1/8, red, art. 270805 500 insulated end sleeves 1,5/8, black, art. 270807 500 insulated end sleeves 2,5/8, blue, art. 270811 100 insulated end sleeves 4/10, grey, art. 270814 100 insulated end sleeves 6/12, yellow, 270818 200 insulated butt connectors 0,25-1,5, art. 260350 200 insulated butt connectors 1,5-2,5, art. 260352 100 insulated socket sleeves 0,25-1,5/6,3x0,8, art. 260392 100 insulated socket sleeves 1,5-2,5/6,3x0,8, art. 260394 100 insulated ring terminals 0,25-1,5, M5, art. 260258 100 insulated ring terminals 1,5-2,5, M4, art. 260270 100 insulated ring terminals 1,5-2,5, M5, art. 260272 100 insulated ring terminals 1,5-2,5, M6, art. 260274 100 insulated ring terminals 0,25-1,5, M4, art. 260256
type DIN I II
PU 1
Content: 1.150 insulated end sleeves – serie DIN, crimping pliers (art. no. 210824), crimp 0,75 - 16,0 mm², in plastic bulk storage chest 420 x 350 x 60 mm. 200 insulated end sleeves 8/0,75, grey, art. 270803 200 insulated end sleeves 8/1, red, art. 270804 200 insulated end sleeves 8/1,5, black, art. 270808 200 insulated end sleeves 8/2,5, blue, art. 270810 100 insulated end sleeves 10/4, grey, art. 270814 100 insulated end sleeves 12/6, yellow, art. 270818 100 insulated end sleeves 18/10, red, art. 270824 50 insulated end sleeves 18/16, blue, art. 270828
Art. no. 270882/DIN 270882 270894 Content 3900 3900 3900
kg 2,150
End sleeve assortment – serie DIN
Assortment for Combi-Crimp – DIN
Art. no. 270895 270896 270897
Content 4700
kg 4,300 4,300 4,300
Content 1150 1150 1150
type DIN I II
kg 1,740 1,700 2,150
PU 1 1 1
PU 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
67
68
kg/100 I TL CSS
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Around the cable
Insulated crimp terminals
... convincing solutions
Trichterförmige Isolierhülse
INFO The Quality The elimination of every need to weld complicated operations to effect an electrical connection, the high productivity in cable termination, the low contact resistance as well as the high connection reliability are only some of the multiple advantages guaranteed by the HAUPA crimp systems. Variety The wide and complete range of crimp terminals satisfies the most different connection requirements with the widest application field even referring to the hardest and least favourable conditions of operation. Materials The high conductivity and the top mechanical caracteristics are guaranteed by the purity (up to 99,9%) of the copper utilized for the production of crimp terminals. Hot treatment In order to ensure the maximum malleability of materials during the crimping operations all copper terminals undergo a hot treatment with forced ventilation and controlled temperature. Surface treatment The crimp terminals are treated with processes of electrolytic tin plating. This method guarantees the maximum adhesion of tin to the crimp terminal surface in order to reduce the electrical resistance to a minimum and to maximalize the protection against corrosion.
PVC insulated crimp terminals Easy Entry 1. Sleeves, made of purest copper 2. Treated with processes of electrolytic tin plating 3. Hot treatment 4. Internal serration for the best most electric contact 5. Insulation Easy Entry sleeve 6. Cable stop 7. Copper sleeve Easy Entry: for quick wire insertions with no strand turn-back and a strong mechanical retention.
Funnel shaped insulating sleeve 3
1
2
Insulation The standard models are available with insulation in special self-extinguishing PVC or in Nylon and in colours according to International Standards. The high quality of the insulation materials employed for all crimp terminals ensure a high degree of resistance to the mechanical solicitations that they must undergo during the crimping operations without alteration of their insulation characterictics.
4
6 7
Underwriters Laboratories Inc. Listed File E338116, E336314
Crimp terminals, PVC-insulated Ring terminals DIN 46237 • of electrolytic copper, tin-plated • Easy Entry • PVC-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260250 260252 260254 260256 260258 260260 260262 260264 260267 260268 260270 260272 260274 260276 260278 260282 260284 260286 260288 260290 260292
CSS M 0,5-1,0 2,5 3 3,5 4 5 6 8 10 1,5-2,5 3 3,5 4 5 6 8 10 4-6 3,5 4 5 6 8 10
d2 2,6 3,2 3,6 4,2 5,2 6,2 8,3 10,4 3,2 3,7 4,2 5,2 6,2 8,2 10,5 3,7 4,2 5,2 6,2 8,2 10,5
d1 1,95 1,95 1,95 1,95 1,95 1,95 1,95 1,95 2,45 2,45 2,45 2,45 2,45 2,45 2,45 3,5 3,5 3,5 3,5 3,5 3,5
d4 4,2 4,2 4,2 4,2 4,2 4,2 4,2 4,2 4,8 4,8 4,8 4,8 4,8 4,8 4,8 6,6 6,6 6,6 6,6 6,6 6,6
s1 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 1,0 1,0 1,0 1,0 1,0 1,0
A 10,4 10,4 10,4 10,4 10,4 10,4 10,4 10,4 11,0 11,0 11,0 11,0 11,0 11,0 11,0 14,0 14,0 14,0 14,0 14,0 14,0
TL 22,2 15,4 22,2 22,0 22,4 23,7 30,0 30,0 18,5 23,0 23,0 26,0 28,0 33,0 33,0 26,5 26,5 29,6 30,6 37,0 40,0
E 8,6 4,4 7,8 7,5 8,0 8,6 12,6 12,8 4,3 8,0 8,0 9,8 11,7 14,5 14,5 8,4 8,4 10,2 11,0 15,3 16,5
B 8,0 5,5 8,0 8,0 8,0 10,0 14,0 14,0 6,4 8,0 8,0 10,0 11,0 15,0 15,0 8,0 8,0 10,0 11,0 15,0 19,0
kg/100 0,710 0,072 0,065 0,079 0,096 0,106 0,136 0,190 0,078 0,078 0,092 0,111 0,123 0,147 0,200 0,163 0,168 0,186 0,196 0,243 0,299
500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
500 500 500 500 500 500 500 500 500 500 500 500 500 500 500
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
500 500 500 500 500 500
PU 100 100 100 100 100 100
Fork terminals DIN 46237 • of electrolytic copper, tin-plated • Easy Entry • PVC-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260300 260302 260304 260306 260308 260310 260312 260314 260316 260318 260320 260322 260324 260326 260328
CSS 0,5-1,0
M 3 3,5 4 5 6 1,5-2,5 3 3,5 4 5 6 4,0-6,0 4 5 6 8 10
d2 3,2 3,7 4,2 5,2 6,2 3,2 3,7 4,2 5,2 6,3 4,2 5,2 6,3 8,2 10,5
d1 1,95 1,95 1,95 1,95 1,95 2,45 2,45 2,45 2,45 2,45 3,5 3,5 3,5 3,5 3,5
d4 4,2 4,2 4,2 4,2 4,2 4,8 4,8 4,8 4,8 4,8 6,6 6,6 6,6 6,6 6,6
s1 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 1,0 1,0 1,0 1,0 1,0
A 10,4 10,4 10,4 10,4 10,4 11,0 11,0 11,0 11,0 11,0 14,0 14,0 14,0 14,0 14,0
TL 20,0 19,4 20,9 21,2 22,4 23,0 20,3 20,3 25,0 27,0 26,0 28,5 29,5 35,2 38,0
E 6,7 6,5 6,3 8,0 8,3 8,4 5,3 5,3 9,5 11,2 7,2 10,5 11,0 15,0 16,6
B 5,6 6,5 6,4 8,0 9,2 5,6 6,6 6,6 9,1 10,0 8,1 9,0 11,0 15,2 19,0
kg/100 0,065 0,065 0,070 0,092 0,101 0,079 0,085 0,084 0,109 0,118 0,116 0,179 0,188 0,229 0,291
Socket sleeves (male) DIN 46231 • of electrolytic copper, tin-plated • Easy Entry • PVC-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260330 260331 260332 260333 260334 260335
CSS 0,5-1,0 1,5-2,5 4-6
d1 1,7 1,7 2,3 2,3 3,4 3,4
d4 4,2 4,2 4,8 4,8 6,8 6,8
A 10,4 10,4 10,4 10,4 13,5 13,5
TL 19,4 24,9 19,4 26,4 23,5 31,7
E 9,0 14,5 9,0 16,0 10,0 18,2
B 2,8 3,0 2,8 2,8 2,8 4,5
kg/100 0,058 0,070 0,066 0,080 0,120 0,170
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
71
Crimp terminals, PVC-insulated Butt connectors • of electrolytic copper, tin-plated • Easy Entry • PVC-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260350 260352 260354
CSS 0,5-1,0 1,5-2,5 4,0-6,0
d1 1,7 2,3 3,4
d4 4,0 4,5 6,8
A 15 15 15
TL 22,7 22,7 26,7
kg/100 0,110 0,130 0,230
500 500 500
PU 100 100 100
500 500 500
PU 100 100 100
kg/100 0,070 0,060 0,080 0,070 0,170 0,300
500 500 500 500 500 500
PU 100 100 100 100 100 100
kg/100 0,070 0,070 0,080 0,080 0,090 0,100 0,090 0,090 0,090 0,120 0,190 0,260
500 500 500 500 500 500 500 500 500 500 500 500
PU 100 100 100 100 100 100 100 100 100 100 100 100
kg/100 0,140 0,150 0,280
500 500 500
PU 100 100 100
Parallel connectors • of electrolytic copper, tin-plated • Easy Entry • PVC-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260360 260362 260364
CSS 0,5-1,0 1,5-2,5 4,0-6,0
d1 1,7 2,3 3,4
d4 4,0 4,5 6,8
A 8,0 8,0 8,0
TL 16,0 16,0 20,5
kg/100 0,060 0,080 0,140
Round pins • of electrolytic copper, tin-plated • Easy Entry • PVC-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260370 260371 260372 260373 260374 260376
CSS 0,5-1,0 1,5-2,5 4,0-6,0 10
d1 d4 1,95 4,20 1,95 4,20 2,45 4,8 2,45 4,8 3,5 6,6 4,5 8,3
A 10,4 10,4 11,0 11,0 14,0 21,5
TL 22,4 20,0 23,0 20,0 28,0 38,0
E 12,0 9,0 12,0 9,0 14,0 15,0
B 1,8 1,8 1,8 1,8 2,6 4,0
Socket sleeves (female) • Brass, tin-plated, PVC-insulated • with vibration-free copper sleeve • Easy Entry Art. no. 260380 260382 260384 260386 260400 260392 260388 260390 260402 260394 260396 260404
CSS 0,5-1,0
1,5-2,5
4,0-6,0
plug 2,8x0,5 2,8x0,8 4,8x0,5 4,8x0,8 5,2x0,8 6,3x0,8 4,8x0,5 4,8x0,8 5,2x0,8 6,3x0,8 6,3x0,8 9,8x1,1
d1 3,5 3,5 3,5 3,5 3,5 3,5 4,3 4,3 4,3 4,3 6,2 6,2
A 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 13,5 13,5
TL 17,9 17,9 18,7 18,7 18,7 20,5 18,7 18,7 18,7 20,5 24,5 29,2
c 6,4 6,4 6,0 6,0 6,4 7,8 6,0 6,0 6,4 7,8 7,8 12,0
B 3,2 3,2 5,0 5,0 5,5 6,6 5,0 5,0 5,5 6,6 6,6 10,0
material PVC PVC PVC PVC PVC PVC PVC PVC PVC PVC PVC PVC
Socket sleeves (female) with branch • Brass, tin-plated, PVC-insulated • with vibration-free copper sleeve • Easy Entry Art. no. 260410 260412 260411
72
kg/100 I TL CSS
CSS 0,5-1,0 1,5-2,5 4,0-6,0
plug 6,3x0,8 6,3x0,8 6,3x0,8
Weight in kg/100 Length Total length Conductor cross section
d1 3,5 4,3 4,3
IN B c c1
A 9,5 9,5 9,5
TL 22,2 22,2 22,2
A1 6,6 6,8 6,8
Identification number Flange width Flange length Flange length1
A2 8,0 8,0 8,0
c2 A M plug
B 7,8 7,8 7,8
material PVC PVC PVC
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Crimp terminals, PVC-insulated Socket sleeves (female), fully-insulated • Brass, tin-plated, PVC-insulated • with vibration-free copper sleeve • Easy Entry Art. no. 260414 260415 260416 260417 260418
CSS 0,5-1,0 1,5-2,5 4,0-6,0
plug 6,3x0,8 4,8x0,8 6,3x0,8 4,8x0,8 6,3x0,8
d1 2,7 2,7 3,2 3,2 3,8
A 11,0 11,0 11,0 11,0 14,0
TL 22,0 20,0 22,0 20,0 25,0
c 6,8 6,0 6,8 6,0 6,8
B 6,6 5,0 6,6 5,0 6,6
material PVC PVC PVC PVC PVC
kg/100 0,129 0,100 0,130 0,110 0,220
500 500 500 500 500
PU 100 100 100 100 100
c 6,5 6,5 6,5 6,7 7,7 6,5 6,7 7,7 7,7
B 2,8 2,8 4,8 4,8 6,3 4,8 4,8 6,3 6,3
material PVC PVC PVC PVC PVC PVC PVC PVC PVC
kg/100 0,060 0,065 0,075 0,080 0,090 0,085 0,090 0,100 0,180
500 500 500 500 500 500 500 500 500
PU 100 100 100 100 100 100 100 100 100
500 500 500 500
PU 100 100 100 100
kg/100 0,130 0,150 0,130 0,250
500 500 500 500
PU 100 100 100 100
kg/100 0,060 0,065 0,125 0,260
500 500 500 500
PU 100 100 100 100
Flat terminals • Brass, tin-plated, PVC-insulated • with vibration-free copper sleeve • Easy Entry Art. no. 260510 260512 260514 260516 260422 260518 260520 260424 260426
CSS 0,5-1,0
1,5-2,5 4,0-6,0
plug 2,8x0,5 2,8x0,8 4,8x0,5 4,8x0,8 6,3x0,8 4,8x0,5 4,8x0,8 6,3x0,8 6,3x0,8
d1 3,8 3,8 3,8 3,8 3,5 3,8 3,8 4,0 5,5
A 10,5 10,5 10,5 10,5 10,0 10,5 10,5 10,0 13,5
TL 19,2 19,2 19,2 19,2 20,5 19,2 19,2 20,5 24,5
Round terminals • of electrolytic copper, tin-plated • Easy Entry • PVC-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260446 260448 260449 260450
CSS 0,5-1,0 1,5-2,5 4,0-6,0
plug 4 mm 5 mm 4 mm 5 mm
d1 3,5 4,3 4,3 6,5
A 9,5 9,5 9,5 13,5
TL 20,2 20,7 20,2 25,0
c 8,7 8,7 8,7 10,0
B 4,0 5,0 4,0 5,0
material PVC PVC PVC PVC
kg/100 0,090 0,110 0,100 0,170
Round sleeves • of electrolytic copper, tin-plated • Easy Entry • PVC-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260440 260442 260443 260444
CSS 0,5-1,0 1,5-2,5 4,0-6,0
plug 4 mm 5 mm 4 mm 5 mm
d1 3,5 4,3 4,3 6,5
A 9,5 9,5 9,5 13,0
TL 20,2 20,7 20,2 25,0
c 8,7 8,7 8,7 12,0
B 4,0 5,0 4,0 5,0
material PVC PVC PVC PVC
End connectors • of electrolytic copper, tin-plated • Nylon-insulated Art. no. 260427 260428 260430 260431
CSS 0,5-1,0 1,5-2,5 4,0-6,0 10
d1 6,2 6,5 9,4 12,0
d4 2,2 2,5 3,5 4,6
A 8,0 8,0 8,5 9,5
TL 15,2 15,2 17,8 22,2
B 5,0 5,9 7,3 9,3
Rapid connectors • of electrolytic copper, tin-plated • Polypropylene Art. no. 260336 260500 260337 260502 260338 260504
CSS 0,5-1,0 1,5-2,5 4,0-6,0
A 13,5 13,5 13,5 17,0 17,0 17,0
TL 20,0 20,5 20,5 10,0 10,0 10,0
kg/100 0,130 0,100 0,130 0,120 0,290 0,140
PU 100 100 100 100 100 100
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
73
Crimp terminals, Nylon-insulated Ring terminals DIN 46237 • of electrolytic copper, tin-plated • Easy Entry • Nylon-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260650 260651 260654 260656 260658 260660 260662 260664 260665 260666 260667 260670 260672 260674 260676 260678 260682 260684 260686 260688 260690 260692
CSS M 0,5-1,0 2,5 3 3,5 4 5 6 8 10 1,5-2,5 2,5 3 3,5 4 5 6 8 10 4,0-6,0 3,5 4 5 6 8 10
d2 2,6 3,2 3,6 4,2 5,2 6,2 8,3 10,4 2,6 3,2 3,7 4,2 5,2 6,2 8,2 10,5 3,7 4,2 5,2 6,2 8,2 10,5
d1 1,95 1,95 1,95 1,95 1,95 1,95 1,95 1,95 2,45 2,45 2,45 2,45 2,45 2,45 2,45 2,45 3,5 3,5 3,5 3,5 3,5 3,5
d4 4,2 4,2 4,2 4,2 4,2 4,2 4,2 4,2 4,8 4,8 4,8 4,8 4,8 4,8 4,8 4,8 6,6 6,6 6,6 6,6 6,6 6,6
s1 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 1,0 1,0 1,0 1,0 1,0 1,0
A 10,4 10,4 10,4 10,4 10,4 10,4 10,4 10,4 11,0 11,0 11,0 11,0 11,0 11,0 11,0 11,0 14,0 14,0 14,0 14,0 14,0 14,0
TL 22,2 22,2 22,2 22,0 22,4 23,7 30,0 30,0 23,0 23,0 23,0 23,0 26,0 28,0 33,0 33,0 26,5 26,5 29,6 30,6 37,0 40,0
E 8,6 8,6 7,8 7,5 8,0 8,6 12,6 12,8 8,0 8,0 8,0 8,0 9,8 11,7 14,5 14,5 8,4 8,4 10,2 11,0 15,3 16,5
B 8,0 8,0 8,0 8,0 8,0 10,0 14,0 14,0 8,0 8,0 8,0 8,0 10,0 11,0 15,0 15,0 8,0 8,0 10,0 11,0 15,0 19,0
kg/100 0,072 0,070 0,067 0,079 0,096 0,105 0,136 0,103 0,100 0,110 0,080 0,088 0,107 0,120 0,142 0,133 0,150 0,165 0,182 0,190 0,237 0,311
500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
500 500 500 500 500 500 500 500 500 500 500 500 500 500 500
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
500 500 500 500 500 500
PU 100 100 100 100 100 100
Fork terminals DIN 46237 • of electrolytic copper, tin-plated • Easy Entry • Nylon-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260700 260702 260704 260706 260708 260710 260712 260714 260716 260718 260721 260722 260724 260726 260728
CSS 0,5-1,0
M 3 3,5 4 5 6 1,5-2,5 3 3,5 4 5 6 4,0-6,0 4 5 6 8 10
d2 3,2 3,7 4,2 5,2 6,2 3,2 3,7 4,2 5,2 6,3 4,2 5,2 6,3 8,2 10,5
d1 1,95 1,95 1,95 1,95 1,95 2,45 2,45 2,45 2,45 2,45 3,5 3,5 3,5 3,5 3,5
d4 4,2 4,2 4,2 4,2 4,2 4,8 4,8 4,8 4,8 4,8 6,6 6,6 6,6 6,6 6,6
s1 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 1,0 1,0 1,0 1,0 1,0
A 10,4 10,4 10,4 10,4 10,4 11,0 11,0 11,0 11,0 11,0 14,0 14,0 14,0 14,0 14,0
TL 20,0 19,4 20,9 21,2 22,4 23,0 20,3 20,3 25,0 27,0 26,0 28,5 29,5 35,2 38,0
E 6,7 6,5 6,3 8,0 8,3 8,4 5,3 5,3 9,5 11,2 7,2 10,5 11,0 15,0 16,6
B 5,6 6,5 6,4 8,0 9,2 5,6 6,6 6,6 9,1 10,0 8,1 9,0 11,0 15,2 19,0
kg/100 0,068 0,066 0,071 0,092 0,080 0,079 0,086 0,084 0,110 0,170 0,157 0,179 0,190 0,230 0,273
Socket sleeves (male) DIN 46231 • of electrolytic copper, tin-plated • Easy Entry • Nylon-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260730 260731 260732 260733 260734 260735
74
kg/100 I TL CSS
CSS 0,5-1,0 1,5-2,5 4,0-6,0
d1 1,7 1,7 2,3 2,3 3,4 3,4
Weight in kg/100 Length Total length Conductor cross section
d4 4,2 4,2 4,8 4,8 6,8 6,8
A 10,4 10,4 10,4 10,4 13,5 13,5
IN B c c1
TL 19,4 24,9 19,4 26,4 23,5 31,7
E 9,0 14,5 9,0 16,0 10,0 18,2
B 2,8 3,0 2,8 2,8 2,8 4,5
Identification number Flange width Flange length Flange length1
kg/100 0,059 0,072 0,067 0,084 0,160 0,173
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Crimp terminals, Nylon-insulated Butt connectors • of electrolytic copper, tin-plated • Easy Entry • Nylon-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260750 260752 260754
CSS 0,5-1,0 1,5-2,5 4,0-6,0
d1 1,7 2,3 3,4
d4 4,0 4,5 6,8
A 15,0 15,0 15,0
TL 22,7 22,7 26,7
kg/100 0,103 0,128 0,221
500 500 500
PU 100 100 100
500 500 500
PU 100 100 100
kg/100 0,072 0,064 0,079 0,074 0,078
500 500 500 500 500
PU 100 100 100 100 100
kg/100 0,070 0,077 0,080 0,080 0,090 0,100 0,090 0,100 0,090 0,110 0,190 0,260
500 500 500 500 500 500 500 500 500 500 500 500
PU 100 100 100 100 100 100 100 100 100 100 100 100
kg/100 0,140 0,150 0,200
500 500 500
PU 100 100 100
Parallel connectors • of electrolytic copper, tin-plated • Easy Entry • Nylon-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 263360 263362 263364
CSS 0,5-1,0 1,5-2,5 4,0-6,0
d1 1,7 2,3 3,4
d4 4,0 4,5 6,8
A 8,0 8,0 8,0
TL 16,0 16,0 16,0
kg/100 0,069 0,080 0,150
Round pins • of electrolytic copper, tin-plated • Easy Entry • Nylon-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 260770 260771 260772 260773 260774
CSS 0,5-1,0 1,5-2,5 4,0-6,0
d1 1,95 1,95 2,45 2,45 3,6
d4 4,2 4,2 4,8 4,8 6,6
A 10,4 10,4 11,0 11,0 14,0
TL 22,0 20,0 23,0 20,0 28,0
E 12 9,0 12,0 9,0 14,0
B 1,9 1,9 1,9 1,9 2,7
Socket sleeves (female) • Brass, tin-plated, Nylon-insulated • with vibration-free copper sleeve • Easy Entry Art. no. 263380 263382 263384 263386 263400 263392 263388 263393 263402 263394 263396 263404
CSS 0,5-1,0
1,5-2,5
4,0-6,0
plug 2,8x0,5 2,8x0,8 4,8x0,5 4,8x0,8 5,2x0,8 6,3x0,8 4,8x0,5 4,8x0,8 5,2x0,8 6,3x0,8 6,3x0,8 9,5x1,2
d1 3,5 3,5 3,5 3,5 3,5 3,5 4,3 4,3 4,3 4,3 6,2 6,2
A 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 13,5 13,5
TL 17,9 17,9 18,7 18,7 18,7 20,5 18,7 18,7 18,7 20,5 24,5 29,2
c 6,4 6,4 6,0 6,0 6,4 7,8 6,0 6,0 6,4 7,8 7,8 12,0
B 3,2 3,2 5,0 5,0 5,5 6,6 5,0 5,0 5,5 6,6 6,6 10,0
material Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon
Socket sleeves (female) with branch • Brass, tin-plated, Nylon-insulated • with vibration-free copper sleeve • Easy Entry Art. no. 263410 263412 263413
CSS 0,5-1,0 1,5-2,5 4,0-6,0
plug 6,3x0,8 6,3x0,8 6,3x0,8
d1 3,5 4,3 4,3
A 9,5 9,5 9,5
TL 22,2 22,2 22,2
A1 6,8 6,8 6,8
A2 8 8,0 8,0
B 7,8 7,8 7,8
material Nylon Nylon Nylon
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
75
Crimp terminals, Nylon-insulated Socket sleeves (female), fully-insulated • Brass, tin-plated, Nylon-insulated • with vibration-free copper sleeve - Easy Entry Art. no. 263451 263452 263453 263414 263415 263456 263416 263417 263418
CSS 0,5-1,0
1,5-2,5 4,0-6,0
plug 2,8x0,5 2,8x0,8 4,8x0,5 6,3x0,8 4,8x0,8 4,8x0,5 6,3x0,8 4,8x0,8 6,3x0,8
d1 4,0 4,0 4,0 4,0 4,0 5,0 5,0 5,0 6,5
A 11,0 11,0 11,0 11,0 11,0 11,0 11,0 11,0 13,0
TL 19,5 19,5 20,2 21,5 20,2 20,2 21,5 20,2 24,2
c 6,5 6,5 6,4 7,5 6,4 6,4 7,5 6,4 7,5
B 3,2 3,2 5,0 6,6 5,0 5,0 6,6 5,0 6,6
material Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon
kg/100 0,085 0,086 0,088 0,120 0,100 0,104 0,130 0,110 0,220
500 500 500 500 500 500 500 500 500
PU 100 100 100 100 100 100 100 100 100
c 6,5 6,5 6,5 6,7 7,7 6,5 6,7 7,7 7,7
B 2,8 2,8 4,8 4,8 6,3 4,8 4,8 6,3 6,3
material Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon
kg/100 0,068 0,066 0,076 0,077 0,090 0,080 0,086 0,100 0,180
500 500 500 500 500 500 500 500 500
PU 100 100 100 100 100 100 100 100 100
500 500 500 500
PU 100 100 100 100
500 500 500 500
PU 100 100 100 100
Flat terminals • Brass, tin-plated, Nylon-insulated • with vibration-free copper sleeve - Easy Entry Art. no. 263510 263512 263514 263516 263422 263518 263520 263424 263426
CSS 0,5-1,0
1,5-2,5 4,0-6,0
plug 2,8x0,5 2,8x0,8 4,8x0,5 4,8x0,8 6,3x0,8 4,8x0,5 4,8x0,8 6,3x0,8 6,3x0,8
d1 3,8 3,5 3,8 3,8 3,5 3,8 3,8 4,0 5,5
A 10,5 10,5 10,5 10,5 10,0 10,5 10,5 10,0 13,5
TL 19,2 19,2 10,5 19,2 20,5 19,2 19,2 20,5 24,5
Round sleeves • of electrolytic copper, tin-plated • Easy Entry • Nylon-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 263440 263442 263443 263444
CSS 0,5-1,0 1,5-2,5 4,0-6,0
plug 4 5 4 5
d1 3,5 4,3 4,3 6,5
A 9,5 9,5 9,5 13,0
TL 20,2 20,7 20,2 25,0
c 8,7 8,7 87 12,0
B 4,0 5,0 4,0 5,0
material Nylon Nylon Nylon Nylon
kg/100 0,130 0,150 0,130 0,200
Round terminals • of electrolytic copper, tin-plated • Easy Entry • Nylon-insulated, with expanded insulating sleeve, suitable for harmonised cables Art. no. 263446 263448 263449 263450
CSS 0,5-1,0 1,5-2,5 4,0-6,0
plug 4 5 4 5
d1 3,5 4,3 4,3 6,5
A 9,5 9,5 9,5 13,5
TL 20,2 20,7 20,2 25,0
c 8,7 8,7 8,7 10,0
B 4,0 5,0 4,0 5,0
material Nylon Nylon Nylon Nylon
kg/100 0,090 0,110 0,100 0,200
INFO Shrinkable connectors These shrinkable connectors are an insulated connecting element for the production of cable connections and circuit points. Their outstanding properties are based on the use of a Polyolefi n shrinkable tube, which is coated with a special adhesive on the inside, which protects the metal crimp connections from environmental infl uences. These connectors or terminal clamps are used wherever a reliable connection is needed under severe environmental conditions. The shrinkable connectors of the HAUPA-SHRINK series combine crimp technology with the completely waterproof shrink technology in one part: crimp first – then shrink and make waterproof! USE: To create simple, durable and weatherproof electrical connections. Particularly suitable well as in the motor vehicle, agricultural machinery and commercial vehicle sector. SPECIAL FEATURE: The fusible inside adhesive cover provides excellent durability and is safer than traditional connectors. SUITABLE FOR MAKING WATERPROOF CONNECTIONS: • Shrink ratio 3:1 • Shrink temperature: >+125°C • Temperature resistance: -55°C to + 125°C • Insulating sleeve: Polyolefi n with inside adhesive • Non-halogen • RoHS conform • No additional insulating and sealing required • Waterproof splice connection • Space-saving and compact • Extremely high strain relief • Easy installation • Full visual testing possible INSTRUCTIONS: The connector is crimped and then shrunk using a hot air blower (with defl ector page 121). The connection Check whether the fusible inside adhesive comes out on the sides to ensure optimal tightness.
76
kg/100 I TL CSS
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Shrinkable connectors, Polyolefin-insulated Butt connectors • Copper, tin-plated • Insulating cover: Polyolefin with inside adhesive • RoHS conform Art. no. 363500 363502 363504
CSS 0,5-1,0 1,5-2,5 4,0-6,0
A 14 15 15
TL 36 36 41
kg/100 0,120 0,132 0,300
500 500 500
PU 100 100 100
kg/100 0,129 0,138 0,200
500 500 500
PU 100 100 100
kg/100 0,092 0,106 0,159
500 500 500
PU 100 100 100
kg/100 0,073 0,066 0,104 0,089 0,112 0,085 0,083 0,122 0,118 0,128 0,173 0,172 0,201 0,251 0,226
500 500 500 500 500 500 500 500 500 500 500 500 500 500 500
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Socket sleeves (female) • Brass, tin-plated • Insulating cover: Polyolefin with inside adhesive • RoHS conform Art. no. 363510 363512 363514
CSS 0,5-1,0 1,5-2,5 4,0-6,0
plug 6,3x0,8 6,3x0,8 6,3x0,8
TL 30,0 30,0 30,0
B 6,6 6,6 6,6
Flat terminals • Brass, tin-plated • Insulating cover: Polyolefin with inside adhesive • RoHS conform Art. no. 363520 363522 363524
CSS 0,5-1,0 1,5-2,5 4,0-6,0
plug 6,3x0,8 6,3x0,8 6,3x0,8
TL 30,0 30,0 30,0
B 6,6 6,6 6,6
Ring terminals • Copper, tin-plated • Insulating cover: Polyolefin with inside adhesive • RoHS conform Art. no. 363530 363532 363534 363536 363538 363540 363542 363544 363546 363548 363550 363552 363554 363556 363558
CSS 0,5-1,0
1,5-2,5
4,0-6,0
M 4 5 6 8 10 4 5 6 8 10 4 5 6 8 10
d2 4,3 5,3 6,5 8,4 10,5 4,3 5,3 6,5 8,4 10,5 4,3 5,3 6,5 8,4 10,5
TL 28,5 28,5 34,5 34,5 37,5 30,5 30,5 35,5 35,5 37,5 34,2 34,0 37,5 42,0 42,0
B 8,0 8,0 11,6 11,6 13,6 8,5 9,5 12,0 12,0 13,6 9,5 9,5 12,0 15,0 15,0
Welded shrink connector • Copper, tin-plated • Insulating cover: Polyolefin with inside adhesive • RoHS conform Art. no. 363600 363602 363604
CSS 0,5-1,0 1,5-2,5 4,0-6,0
kg/100 0,090 0,110 0,160
PU 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
77
Assortments of insulated terminals Assortment of insulated terminals
Assortment of insulated terminals
Content: 1.250 crimping terminals, crimping pliers (art. 210761), crimp 0,5 - 6,0 mm², in plastic bulk storage chest 420 x 350 x 60 mm.
Content: 1.200 Crimping terminals, 1 crimping pliers for insulated crimping terminals (art. 210761), range 0.5 - 6 mm² in plastic bulk storage chest.
100 insulated ring terminals 0,25-1,5, M3, art. 260252 100 insulated ring terminals 0,25-1,5, M4, art. 260256 100 insulated ring terminals 0,25-1,5, M5, art. 260258 100 insulated ring terminals 1,5-2,5, M4, art. 260270 100 insulated ring terminals 1,5-2,5, M5, art. 260272 50 insulated ring terminals 1,5-2,5, M6, art. 260274 100 insulated ring terminals 2,5-6, M5, art. 260286 50 insulated ring terminals 2,5-6, M6, art. 260288 50 insulated fork type 0,25-1,5, M4, art. 260304 50 insulated fork type 1,5-2,5, M4, art. 260314 50 insulated fork type 2,5-6, M5, art. 260322 50 insulated butt connectors 0,25-1,5, art. 260350 50 insulated butt connectors 1,5-2,5, art. 260352 50 insulated butt connectors 2,5-6, art. 260354 50 insulated round pin 0,25-1,5, art. 260370 50 insulated round pin 1,5-2,5, art. 260372 50 insulated round pin 2,5-6, art. 260374 50 insulated socket sleeves 1,5-2,5/6,3x0,8, art. 260394 50 insulated flat terminals 1,5-2,5/6,3x0,8, art. 260424
100 insulated ring terminals 0,25-1,5, M4, art. 260256 100 insulated ring terminals 0,25-1,5, M5, art. 260258 100 insulated ring terminals 0,25-1,5, M6, art. 260260 100 insulated ring terminals 1,5-2,5, M4, art. 260270 100 insulated ring terminals 1,5-2,5, M5, art. 260272 100 insulated ring terminals 1,5-2,5, M6, art. 260274 100 insulated ring terminals 2,5-6, M5, art. 260286 100 insulated ring terminals 2,5-6, M6, art. 260288 100 insulated ring terminals 2,5-6, M8, art. 260290 100 insulated butt connectors 0,25-1,5, art. 260350 100 insulated butt connectors 1,5-2,5, art. 260352 100 insulated butt connectors 2,5-6, art. 260354
Art. no. 260762
Content 1250
insulation PVC
kg 3,139
PU 1
Art. no. 260765
Containing: 1250 insulated terminals, 1 crimping pliers (art. 210802), press range 1.5 - 6 mm², in plastic bulk storage chest. 100 insulated ring terminals 0,25-1,5, M3, art. 260252 100 insulated ring terminals 0,25-1,5, M4, art. 260256 100 insulated ring terminals 0,25-1,5, M5, art. 260258 100 insulated ring terminals 1,5-2,5, M4, art. 260270 100 insulated ring terminals 1,5-2,5, M5, art. 260272 50 insulated ring terminals 1,5-2,5, M6, art. 260274 100 insulated ring terminals 2,5-6, M5, art. 260286 50 insulated ring terminals 2,5-6, M6, art. 260288 50 insulated fork type 0,25-1,5, M4, art. 260304 50 insulated fork type 1,5-2,5, M4, art. 260314 50 insulated fork type 2,5-6, M5, art. 260322 50 insulated butt connectors 0,25-1,5, art. 260350 50 insulated butt connectors 1,5-2,5, art. 260352 50 insulated butt connectors 2,5-6, art. 260354 50 insulated round pin 0,25-1,5, art. 260370 50 insulated round pin 1,5-2,5, art. 260372 50 insulated round pin 2,5-6, art. 260374 50 insulated socket sleeves 1,5-2,5/6,3x0,8, art. 260394 50 insulated flat terminals 1,5-2,5/6,3x0,8, art. 260424
78
kg/100 I TL CSS
insulation PVC PVC
Weight in kg/100 Length Total length Conductor cross section
210802 -
IN B c c1
type I
kg 3,367
PU 1
Content: 1.200 crimping terminals, crimping pliers (art. 210802), crimp 0,5 - 6,0 mm², in plastic bulk storage chest 420 x 350 x 60 mm. 100 insulated ring terminals 0,25-1,5, M4, art. 260256 100 insulated ring terminals 0,25-1,5, M5, art. 260258 100 insulated ring terminals 0,25-1,5, M6, art. 260260 100 insulated ring terminals 1,5-2,5, M4, art. 260270 100 insulated ring terminals 1,5-2,5, M5, art. 260272 100 insulated ring terminals 1,5-2,5, M6, art. 260274 100 insulated ring terminals 2,5-6, M5, art. 260286 100 insulated ring terminals 2,5-6, M6, art. 260288 100 insulated ring terminals 2,5-6, M8, art. 260290 100 insulated butt connectors 0,25-1,5, art. 260350 100 insulated butt connectors 1,5-2,5, art. 260352 100 insulated butt connectors 2,5-6, art. 260354
Art. no. 260777 Content 1250 1250
insulation PVC
Assortment of insulated terminals
Assortment of insulated terminals
Art. no. 260764 262048
Content 1200
Identification number Flange width Flange length Flange length1
kg 3,278 3,400
c2 A M plug
Content 1200
kg 2,980
PU 1 1
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
PU 1
Around the cable
Socket sleeves
... convincing solutions
Socket sleeves (male and female) Socket sleeves (female) with cable stop • bare brass • not insulated, to DIN 46247/part 1 - 3 and similar Art. no. 280000 280004 280008 280012 280016 280020
CSS 0,5-1 1-2,5 0,5-1,25
plug 6,3x0,8 6,3x0,8 4,8x0,8 4,8x0,5 2,8x0,8 2,8x0,5
TL 19,2 19,2 15,0 15,0 16,0 16,0
c 7,6 7,6 6,4 6,4 6,4 6,4
B 7,6 7,6 5,6 5,6 3,75 3,75
kg/100 0,073 0,079 0,075 0,043 0,040 0,020
PU 200 200 200 200 200 200
kg/100 0,073 0,038 0,0410 0,027 0,023 0,027
PU 200 200 200 200 200 200
kg/100 0,073 0,078
PU 200 200
kg/100 0,075 0,078
PU 200 200
kg/100 0,108 0,103
PU 200 200
kg/100 0,110 0,112
PU 200 200
Socket sleeves (female) with cable stop • bare brass • not insulated, to DIN 46247/part 1 - 3 and similar Art. no. 280030 280034 280038 280042 280046 280050
CSS 0,5-1,0 1,0-2,5 0,5-1,25
plug 6,3x0,8 6,3x0,8 4,8x0,8 4,8x0,5 2,8x0,8 2,8x0,5
TL 19,2 19,2 15,0 15,0 16,0 16,0
c 7,6 7,6 6,4 6,4 6,4 6,4
B 7,6 7,6 5,6 5,6 3,75 3,75
Socket sleeves (female) with cable stop • bare brass • not insulated, to DIN 46247/part 1 - 3 and similar Art. no. 280060 280064
CSS 0,5-1,25 1,0-2,5
plug 6,3x0,8 6,3x0,8
TL 14,1 14,1
c 7,6 7,6
B 7,6 7,6
Socket sleeves (female) with cable stop • bare brass • not insulated, to DIN 46247/part 1 - 3 and similar Art. no. 280070 280074
CSS 0,5-1,0 1,0-2,5
plug 6,3x0,8 6,3x0,8
TL 14,1 14,1
c 7,6 7,6
B 7,6 7,6
Socket sleeves (female) with cable stop • bare brass • not insulated, to DIN 46247/part 1 - 3 and similar Art. no. 280080 280084
CSS 0,5-1,0 1,0-2,5
plug 6,3x0,8 6,3x0,8
TL 19,6 16,2
c 7,7 7,7
B 7,6 7,6
Socket sleeves (female) with cable stop • bare brass • not insulated, to DIN 46247/part 1 - 3 and similar Art. no. 280090 280094
80
kg/100 I TL CSS
CSS 0,5-1,0 1,0-2,5
plug 6,3x0,8 6,3x0,8
Weight in kg/100 Length Total length Conductor cross section
TL 19,6 16,2
IN B c c1
c 7,7 7,7
B 7,6 7,6
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Flat terminals • bare brass • uninsulated Art. no. 280100 280104
CSS 0,5-1,0 1,0-2,5
plug 6,3x0,8 6,3x0,8
TL 20,6 17,2
c 6,35 6,35
B 6,3 6,3
kg/100 0,055 0,057
PU 200 200
plug 6,3x0,8 6,3x0,8
TL 20,6 17,2
c 6,35 6,35
B 6,3 6,3
kg/100 0,054 0,057
PU 200 200
kg/100 0,200 0,085
PU 200 200
kg/100 0,082 0,089
PU 200 200
Flat terminals • tin-plated brass • uninsulated Art. no. 280110 280114
CSS 0,5-1,0 1,0-2,5
Socket sleeves (male) with latching tongue • bare brass • uninsulated Art. no. 280101 280105
CSS 0,5-1,0 1,0-2,5
plug 6,3x0,8 6,3x0,8
TL 20,6 17,2
c 6,35 6,35
B 6,3 6,3
Socket sleeves (male) with latching tongue • tin-plated brass • uninsulated Art. no. 280111 280115
CSS 0,5-1,0 1,0-2,5
plug 6,3x0,8 6,3x0,8
TL 20,6 17,2
c 6,35 6,35
B 6,3 6,3
Ring terminals • bare brass • uninsulated Art. no. 280120 280124 280128 280132 280136 280140
CSS 0,5-1,0 1,0-2,5
M 3 4 5 3 4 5
d2 3,2 4,3 5,08 3,2 4,3 5,08
TL 21,0 21,0 22,0 21,0 21,0 22,0
B 8,0 8,0 9,5 8,0 8,0 9,5
kg/100 0,054 0,038 0,068 0,076 0,046 0,045
PU 200 200 200 200 200 200
M 3 4 5 3 4 5
d2 3,2 4,3 5,08 3,2 4,3 5,08
TL 21,0 21,0 22,0 21,0 21,0 22,0
B 8,0 8,0 9,5 8,0 8,0 9,5
kg/100 0,057 0,040 0,056 0,076 0,046 0,043
PU 200 200 200 200 200 200
Ring terminals • tin-plated brass • uninsulated Art. no. 280150 280154 280158 280162 280166 280170
CSS 0,5-1,0 1,0-2,5
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
81
Socket sleeves (female), insulating sleeves, connectors Flat terminals • bare brass • uninsulated Art. no. 280180 280182 280184 280186 280188
plug 6,3x0,8 6,3x0,8 6,3x0,8 6,3x0,8 6,3x0,8
d2 TL 4,2 19,2 4,2 10,2 4,2 11,3 4,2 30,3 4,2 11,45
form 1 5 2 4 3
0° 45° 90° 0° 90°
kg/100 0,076 0,082 0,085 0,136 0,134
PU 200 200 200 200 200
d2 TL 4,2 19,2 4,2 10,2 4,2 11,3 4,2 30,3 4,2 11,45
form 1 5 2 4 3
0° 45° 90° 0° 90°
kg/100 0,083 0,084 0,095 0,137 0,272
PU 200 200 200 200 200
kg/100 0,056 0,069 0,047 0,071 0,036 0,043 0,063 0,048
PU 100 100 100 100 100 100 100 100
kg/100 0,157 1,770 0,200 2,800 0,240 2,850 0,250 0,440
PU 100 10 100 10 100 10 100 50
kg/100 0,500 0,500
PU 50 50
Flat terminals • tin-plated brass • uninsulated Art. no. 280190 280192 280194 280196 280198
plug 6,3x0,8 6,3x0,8 6,3x0,8 6,3x0,8 6,3x0,8
Insulating sleeves • of PVC and nylon
Art. no. 280200 280202 280204 280206 280208 280210 280212 280214
plug 6,3x0,8 6,3x0,8 4,8x0,8 4,8x0,8 2,8x0,8 2,8x0,8 6,3x0,8 6,3x0,8
form 1 2 6 2 6 5 4 3
material PVC Nylon PVC Nylon PVC Nylon PVC Nylon
Elastic connectors with socket sleeves (male) • 1 - 12 pole • PVC, natural colour Art. no. 280460 280482 280490 280512 280520 280542 280550 280572
plug TL 2,8x0,8 7,5 2,8x0,8 88,0 4,8x0,8 12,5 4,8x0,8 147,0 6,3x0,8 12,5 6,3x0,8 147,0 2,8x0,8 12,5 2,8x0,8 147,0
form 1 12 1 12 1 12 1 12
B 35,0 35,0 28,0 28,0 28,0 28,0 28,0 28,0
PoZ 1 12 1 12 1 12 1 12
material PVC PVC PVC PVC PVC PVC PVC PVC
Elastic cable distributors • PVC, natural colour
Art. no. 280580 280582
82
kg/100 I TL CSS
plug 6,3x0,8 6,3x0,8
TL 53,0 51,0
Weight in kg/100 Length Total length Conductor cross section
form 1 2
IN B c c1
c 15,0 13,0
material PVC PVC
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Around the cable
Cable lugs and connectors
... convincing solutions
INFO Instructions
Temperature resistance
1. The choice of the connector In order to obtain a connection that can be guaranteed for a long time it is necessary to select the connectors suitable to the application field and strictly conform to the section of the cable to be crimped. In the large range of Haupa products you will certainly find the ideal solution for every requirement.
2. Stripping Every crimping operation requires first that the cable is stripped without deforming the wires.
3. Cleaning The conductor ends have to be solidly cleaned from oxidation and every rest of dirt before mounting.
stripping tolerance Ø mm2 +/- mm 0,5 - 2,5 0,8 4-6 1,2 10 - 120 1,6 150 - 630 3,2
4. Assembling a) Fit the connector to the cable with a round section in the complete lenght of the stripped area. b) Verify that there are no wires outside the connector. If you need to use sectoral cables you must arrange a previous rounding crimping operation of the cable.
A=L
Connector
Temperature
Cable lugs & connectors copper
max.120° C (in acc. to DIN 46234)
Cable lugs & connectors aluminium
max.120° C (in acc. to IEC 61238 )
Cable lugs & connectors of pure nickel max. 500° C End sleeves without insulation
max. 120° C (in acc. to DIN 46234)
End sleeves insulated
max. 105° C
Insulated terminals PVC
- 10° C --> + 75° C
Insulated terminals Nylon
- 55° C --> + 105° C
Shrinking terminals
- 55° C --> + 105° C
Socket sleeves male & female, tin-coated brass, uninsulated
- 55° C --> + 100° C
5. Choice of the crimping tool All dies and punchings of the Haupa crimp system guarantee a high degree of connection between connector and cable. Exercise the crimping operation as shown in drawing 1 on the terminals and as drawing 2 on the butt connectors. The elevated pressure exerted by dies on terminals cause a uniform deformation on the whole crimping area.
84
kg/100 I TL CSS
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
90°
Identification number Flange width Flange length Flange length1
120°
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Solderles terminals Crimp ring terminals without insulation DIN 46234 • Material: 99,9% electrolytic copper • Surface: tin-plated • Ring type • For conductors, e.g. to VDE 0295 class 2,5,6 • Hard soldered in crimping area • Grooved profile for improved contact caracteristics
Art. no. 290619 290620 290621 290622 290624 290623 290625 290617 290626 290627 290628 290630 290632 290634 290635 290646 290648 290650 290652 290654 290656 290658 290660 290662 290663 290664 290666 290668 290670 290672 290676 290678 290680 290682 290684 290686 290688 290690 290692 290694 290696 290698 290700 290701 290702 290704 290707 290708 290710 290712 290713 290714 290716 290717 290719 290721 290718 290720
CSS M 0,5-1,0 2,5 3 3,5 4 5 6 8 10 1,5-2,5 3 3,5 4 5 6 8 10 6 5 6 8 10 12 10 5 6 8 10 12 16 5 6 8 10 12 25 6 8 10 12 16 35 8 10 12 16 50 8 10 12 16 70 8 10 12 95 8 10 12 16 120 10 12 16 20 150 10 12 16 185 16
d2 2,6 3,2 3,7 4,2 5,2 6,2 8,2 10,5 3,2 3,7 4,2 5,2 6,2 8,2 10,5 5,3 6,5 8,4 10,5 13,0 5,3 6,4 8,4 10,5 13,0 5,3 6,4 8,4 10,5 13,0 6,4 8,4 10,5 13,0 17,0 8,4 10,5 13,0 17,0 8,4 10,5 13,0 17,0 8,4 10,5 13,0 8,4 10,5 13,0 17,0 10,5 13,0 17,0 21,0 17,0 13,0 10,5 17,0
d1 1,95 1,95 1,95 1,95 1,95 1,95 1,95 1,95 2,45 2,45 2,45 2,45 2,45 2,45 2,45 3,6 3,6 3,6 3,6 3,6 4,5 4,5 4,5 4,5 4,5 5,8 5,8 5,8 5,8 5,8 7,5 7,5 7,5 7,5 7,5 9,0 9,0 9,0 9,0 11,0 11,0 11,0 11,0 13,0 13,0 13,0 15,0 15,0 15,0 15,0 16,5 16,5 16,5 16,5 19,0 19,0 19,0 21,0
A 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 6,0 6,0 6,0 6,0 6,0 8,0 8,0 8,0 8,0 8,0 10,0 10,0 10,0 10,0 10,0 11,0 11,0 11,0 11,0 11,0 12,0 12,0 12,0 12,0 16,0 16,0 16,0 16,0 18,0 18,0 18,0 20,0 20,0 20,0 20,0 22,0 22,0 22,0 22,0 24,0 24,0 24,0 25,0
TL 17,25 17,25 17,25 16,65 17,25 18,5 25,0 25,0 17,25 17,25 17,25 20,0 22,0 26,8 26,8 15,0 16,0 19,0 21,0 21,0 16,0 17,0 20,0 21,0 23,0 20,0 20,0 22,0 24,0 26,0 25,0 25,0 26,0 31,0 35,0 26,0 27,0 31,0 36,0 34,0 34,0 36,0 40,0 38,0 38,0 38,0 42,0 42,0 42,0 44,0 44,0 44,0 48,0 53,0 50,0 50,0 50,0 50,0
B 8,0 8,0 8,0 8,0 8,0 10,0 14,0 14,0 8,0 8,0 8,0 10,0 11,0 15,0 15,0 10,0 11,0 14,0 18,0 18,0 10,0 11,0 14,0 18,0 22,0 10,0 11,0 14,0 18,0 22,0 12,0 16,0 18,0 22,0 28,0 16,0 18,0 22,0 28,0 18,0 18,0 22,0 28,0 22,0 22,0 22,0 24,0 24,0 24,0 28,0 24,0 24,0 28,0 32,0 30,0 30,0 30,0 36,0
kg/100 0,056 0,055 0,039 0,065 0,082 0,091 0,121 0,178 0,065 0,058 0,076 0,097 0,110 0,132 0,138 0,157 0,166 0,214 0,281 0,219 0,216 0,227 0,280 0,339 0,300 0,353 0,362 0,404 0,477 0,565 0,706 0,776 0,764 0,886 1,190 0,896 0,900 1,000 1,400 1,600 1,600 1,700 2,000 2,500 2,500 2,400 3,800 3,800 3,700 3,900 5,200 5,200 6,200 5,900 7,500 7,400 6,800 9,400
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 40 40 40 25 25 25 20 20 20 20 20 25 25 25 25 25 25 25 20
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
85
Solderless terminals insulatet Insulated crimp cable lugs • Nylon-insulated • Material: 99,9% E-Cu • Surface: tin-plated • Ring type • For conductors, e.g. to VDE 0295 class 2, 5, 6 • Hard soldered in crimping area • Grooved profile for improved contact caracteristics • Crimp direct with insulation
Art. no. 260902 260904 260906 260908 260910 260912 260914 260916 260918 260920 260922 260924 260926 260928 260930 260932 260934 260936 260938 260940 260942 260944 260946 260948 260950 260952 260954 260956 260960 260962 260964 260966 260968 260970 260972 260974 260976 260978 260980 260982 260984
CSS 10
16
25
35
50
70
95
120
150
M 5 6 8 10 12 5 6 8 10 12 5 6 8 10 12 16 6 8 10 12 16 6 8 10 12 16 6 8 12 16 8 10 12 16 8 10 12 16 10 12 16
d2 5,3 6,5 8,4 10,5 13,0 5,3 6,5 8,4 10,5 13,0 5,3 6,5 8,4 10,5 13,0 17,0 6,5 8,4 10,5 13,0 17,0 6,5 8,4 10,5 13,0 17,0 6,5 8,4 13,0 17,0 8,4 10,5 13,0 17,0 8,4 10,5 13,0 17,0 10,5 13,0 17,0
d1 4,5 4,5 4,5 4,5 4,5 5,8 5,8 5,8 5,8 5,8 7,5 7,5 7,5 7,5 7,5 7,5 9,0 9,0 9,0 9,0 9,0 11,0 11,0 11,0 11,0 11,0 13,0 13,0 13,0 13,0 15,0 15,0 15,0 15,0 16,5 16,5 16,5 16,5 19,0 19,0 19,0
d4 8,0 8,0 8,0 8,0 8,0 11,0 11,0 11,0 11,0 11,0 13,0 13,0 13,0 13,0 13,0 13,0 14,5 14,5 14,0 14,5 14,5 16,5 16,5 16,5 16,5 16,5 18,7 18,7 18,7 18,7 21,7 21,7 21,7 21,7 24,2 24,2 24,2 24,2 27,2 27,2 27,2
A 16,5 16,5 16,5 16,5 16,5 21,5 21,5 21,5 21,5 21,5 24,0 24,0 24,0 24,0 24,0 24,0 27,0 27,0 27,0 27,0 27,0 29,5 29,5 29,5 29,5 29,5 31,5 31,5 31,5 31,5 35,5 35,5 35,5 35,5 40,0 40,0 40,0 40,0 44,0 44,0 44,0
TL 24,5 25,5 28,5 29,5 31,5 31,5 31,5 33,5 35,5 37,5 38,0 38,0 38,0 39,0 44,0 48,0 41,0 41,0 42,0 46,0 51,0 47,5 47,5 47,5 49,5 53,5 51,0 51,0 51,0 55,0 57,5 57,5 57,5 59,5 62,0 62,0 62,0 66,0 70,0 70,0 70,0
kg/100 0,283 0,240 0,200 0,400 0,420 0,400 0,400 0,500 0,600 0,600 0,800 0,800 0,900 1,000 1,100 1,300 1,100 1,000 1,000 1,260 1,550 3,300 3,300 3,200 3,600 4,200 5,200 5,000 5,000 5,400 8,000 8,200 7,800 8,200 10,600 11,200 10,800 11,600 16,800 16,800 16,800
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25
Solderless terminals for meter connection • Nylon-insulated • Material: 99,9% E-Cu • Surface: tin-plated • Fork type • For conductors, e.g. to VDE 0295 class 2, 5, 6 • Hard soldered in crimping area • Grooved profile for improved contact caracteristics • Crimp direct with insulation
Art. no. 260858 260860 260862 260863
86
kg/100 I TL CSS
CSS 10 16
M 5 6 5 8
Weight in kg/100 Length Total length Conductor cross section
kg/100 0,302 0,320 0,584 0,630
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
PU 50 50 50 50
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Solderless terminals Fork terminals without insulation DIN 46234 • Material: 99,9% E-Cu • Surface: tin-plated • Fork type • For conductors, e.g. to VDE 0295 class 2, 5, 6 • Hard soldered in crimping area • Grooved profile for improved contact caracteristics
Art. no. 290730 290731 290732 290734 290735 290736 290739 290738 290740 290742 290744 290746 290748 290750 290751 290752 290754 290756
CSS 0,5-1,0
1,5-2,5
4,0-6,0
10 16
M 3 3,5 4 5 6 3 3,5 4 5 6 4 5 6 8 10 5 6 6
d2 3,2 3,7 4,2 5,2 6,2 3,2 3,7 4,2 5,2 6,2 4,2 5,2 6,2 8,2 10,5 5,2 6,4 6,4
d1 1,95 1,95 1,95 1,95 1,95 2,45 2,45 2,45 2,45 2,45 3,5 3,5 3,5 3,5 3,5 4,7 4,7 5,8
A TL 5,2 14,6 5,2 14,9 5,2 15,0 5,2 16,25 5,2 17,5 5,2 17,25 5,2 14,3 5,2 14,3 5,2 19,25 5,2 21,0 6,5 18,6 6,5 21,1 6,5 22,3 6,5 27,3 6,5 30,2 8,5 20,8 8,5 20,8 10,5 25,5
B 5,6 6,5 6,4 8,0 9,2 5,6 6,6 6,6 9,1 10,0 8,0 9,0 11,0 15,2 19,0 9,0 10,3 11,0
kg/100 0,076 0,077 0,058 0,086 0,087 0,088 0,083 0,082 0,095 0,120 0,152 0,176 0,161 0,252 0,319 0,248 0,260 0,513
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
kg/100 0,083 0,078 0,065 0,058 0,157 0,300 0,411 0,600 1,238 1,800 3,053 4,100
PU 100 100 100 100 100 100 100 100 100 100 50 50
Pin terminals without insulation DIN 46230 • Material: 99,9% E-Cu • Surface: tin-plated • Pin type • For conductors, e.g. to VDE 0295 class 2, 5, 6 • Hard soldered in crimping area • Grooved profile for improved contact caracteristics
Art. no. 290770 290771 290773 290775 290777 290776 290778 290780 290782 290784 290786 290788
CSS 0,5-1,0 1,5-2,5 4,0-6,0 10,0 16 25 35 50 70 95
d1 1,85 1,85 2,4 2,4 3,6 4,5 5,8 7,0 8,2 9,5 11,2 13,59
A 5,0 5,0 5,0 5,0 6,0 8,5 10,5 14,0 16,0 19,0 24,0 24,0
TL 17,3 17,3 17,3 17,3 24,5 20,5 26,5 33,0 40,0 45,0 55,0 55,0
E 12,0 9,0 9,0 9,0 12,5 14,0 14,0 15,0 20,0 20,0 25,0 25,0
B 1,8 1,8 1,8 1,8 2,6 4,0 4,5 7,0 8,0 9,5 11,5 13,5
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
87
Solderless connectors Parallel connectors DIN 46341 part 1, type A • Material: 99,9% electrolytic copper • Surface: tin-plated • For connecting different conductor cross-sections • Hard soldered in crimping area • Grooved profile for improved contact caracteristics
Art. no. 291090 291092 291096 291098 291100 291102 291104 291106 291108 291110 291112 291114
CSS 0,5-1,0 1,5-2,5 4-6 10 16 25 35 50 70 95 120 150
d1 1,6 2,3 3,6 4,5 5,5 7,0 8,5 10,0 12,0 13,5 15,0 16,5
d4 3,3 4,2 5,5 7,0 8,5 10,0 12,0 14,0 16,5 18,0 19,5 21,0
TL 7 7 7 9 10 13 16 19 19 20 22 26
kg/100 0,064 0,070 0,090 0,165 0,274 0,500 0,800 1,200 1,600 2,400 3,500 3,000
2000 2000 1800 2000 1000 600 300 300 200 150 100 80
PU 100 100 100 100 100 100 50 50 50 25 25 20
kg/100 0,200 2000 0,127 2000 0,200 2000 0,300 800 0,600 500 1,100 400 1,500 150 2,300 150 3,400 100 5,800 50 8,500 50 11,100 40
PU 100 100 100 100 50 50 25 25 25 25 25 20
Solderless butt connectors DIN 46341 part 1, type B • Material: 99.9% electrolytic copper • Surface: tin-plated • annealing for easier crimping • For stranded conductors e.g. VDE 0295 class 2, 5, 6 • With buttmarks for precise cable insertion
Art. no. 291119 291120 291124 291126 291128 291130 291132 291134 291136 291138 291140 291142
88
kg/100 I TL CSS
CSS 0,5-1,0 1,5-2,5 4-6 10 16 25 35 50 70 95 120 150
d1 1,6 2,3 3,6 4,5 5,5 7,0 8,5 10,0 12,0 13,5 15,0 16,5
d4 3,3 4,2 5,5 7,0 8,5 10,0 12,0 14,0 16,5 18,0 19,5 21,0
Weight in kg/100 Length Total length Conductor cross section
TL 15 15 15 21 26 29 32 48 48 48 48 48
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Tubular terminals, standard series Tubular cable lugs, standard series • For stranded round shaped conductors e.g. VDE 0295 class 2 • For preround sector shaped conuctors • Annealed material for easier crimping • Material: 99.9% electrolytic copper E-CU DIN 40500 • Surface: tin-plated available with and without sight hole e.g. 29 09 00/S (add xx xx xx/s when ordering)
Art. no. 290900 290902 290904 290906 290908 290910 290912 290914 290916 290918 290920 290922 290924 290926 290928 290930 290932 290934 290936 290938 290940 290942 290944 290946 290948 290950 290952 290954 290956 290958 290960 290962 290964 290966 290968 290970 290972 290974 290976 290978 290980 290982 290984 290985 290986 290988 290990 290991 290992 290994 290996 290998 290999 291000 291002
CSS 0,75 1,5
2,5
4
6
10
16
25
35
50
70
95
M 3 4 3 4 5 6 3 4 5 6 8 4 5 6 8 4 5 6 8 5 6 8 10 12 5 6 8 10 12 6 8 10 12 6 8 10 12 16 6 8 10 12 16 6 8 10 12 14 16 8 10 12 14 16 20
d2 3,2 4,3 3,2 4,3 5,3 6,5 3,2 4,3 5,3 6,5 8,5 4,3 5,3 6,5 8,5 4,3 5,3 6,5 8,5 5,3 6,5 8,5 10,5 13,0 5,3 6,5 8,5 10,5 13,0 6,5 8,5 10,5 13,0 6,5 8,5 10,5 13,0 17,0 6,5 8,5 10,5 13,0 17,0 6,5 8,5 10,5 13,0 15,0 17,0 8,5 10,5 13,0 15,0 17,0 21,0
d1 1,3 1,3 1,8 1,8 1,8 1,8 2,3 2,3 2,3 2,3 2,3 3,0 3,0 3,0 3,0 3,5 3,5 3,5 3,5 4,5 4,5 4,5 4,5 4,5 5,5 5,5 5,5 5,5 5,5 7,0 7,0 7,0 7,0 8,5 8,5 8,5 8,5 8,5 10,0 10,0 10,0 10,0 10,0 12,0 12,0 12,0 12,0 12,0 12,0 13,5 13,5 13,5 13,5 13,5 13,5
d4 2,8 2,8 3,3 3,3 3,3 3,3 4,2 4,2 4,2 4,2 4,2 5,0 5,0 5,0 5,0 6,5 6,5 6,5 6,5 7,0 7,0 7,0 7,0 7,0 8,5 8,5 8,5 8,5 8,5 10,0 10,0 10,0 10,0 12,0 12,0 12,0 12,0 12,0 14,0 14,0 14,0 14,0 14,0 16,5 16,5 16,5 16,5 16,5 16,5 18,0 18,0 18,0 18,0 18,0 18,0
A v1 v2 6,0 1 6,0 1 6,0 1 6,0 1 6,0 1 6,0 1 6,0 1 6,0 1 6,0 1 6,0 1 6,0 1 8,0 1 8,0 1 8,0 1 8,0 1 9,0 1 9,0 1 9,0 1 9,0 1 10,0 1 10,0 1 10,0 1 10,0 1 10,0 1 13,0 1 1 13,0 1 1 13,0 1 1 13,0 1 1 13,0 1 1 15,0 2 1 15,0 2 1 15,0 2 1 15,0 2 1 17,0 2 1 17,0 2 1 17,0 2 1 17,0 2 1 17,0 2 1 19,0 2 1 19,0 2 1 19,0 2 1 19,0 2 1 19,0 2 1 21,0 2 1 21,0 2 1 21,0 2 1 21,0 2 1 21,0 2 1 21,0 2 1 25,0 2 1 25,0 2 1 25,0 2 1 25,0 2 1 25,0 2 1 25,0 2 1
l 12,0 13,0 12,0 13,0 14,0 16,0 12,0 13,0 14,0 16,0 20,0 17,0 17,0 19,0 22,0 18,0 21,0 21,0 23,0 22,0 22,0 25,0 27,0 29,0 26,0 27,0 29,0 31,0 33,0 30,0 32,0 34,0 35,0 32,0 34,0 37,0 38,0 42,0 37,0 37,0 39,0 43,0 46,0 43,0 43,0 44,0 46,0 48,0 50,0 48,0 48,0 49,0 51,0 54,0 60,0
B 6,0 6,5 6,5 6,5 7,5 9,0 7,5 7,5 8,5 9,5 13,0 8,5 9,0 10,0 13,0 8,5 10,0 12,0 15,0 12,0 12,0 15,0 17,0 19,0 12,0 12,0 15,0 17,0 19,0 14,0 16,0 18,0 19,0 17,0 17,0 19,0 21,0 26,0 20,0 20,0 20,0 23,0 28,0 23,0 23,0 23,0 23,0 23,0 28,0 26,0 26,0 26,0 26,0 28,0 36,0
c1 3,25 4,0 3,25 4,0 4,75 6,5 3,25 4,0 4,75 6,5 7,75 4,75 4,75 6,5 8,5 5,0 6,5 6,5 10,0 6,5 6,5 10,0 12,0 13,0 5,5 6,25 8,5 10,5 12,0 7,5 10,0 12,0 13,0 7,5 10,0 12,0 13,0 16,0 10, 10,0 12,0 13,0 16,0 10,0 10,0 12,0 13,0 14,5 16,0 12,0 12,0 13,0 14,5 16,0 22,0
c2 4,0 5,0 4,0 5,0 5,5 6,5 4,0 5,0 5,5 6,5 9,5 5,5 6,0 6,5 9,5 5,5 7,5 7,5 10,0 7,5 7,5 10,0 12,0 13,0 6,5 7,5 9,5 11,5 13,0 7,5 10,0 12,0 13,0 7,5 10,0 12,0 13,0 16,0 10,0 10,0 12,0 13,0 16,0 10,0 10,0 12,0 13,0 14,5 16,0 12,0 12,0 13,0 14,5 16,0 22,0
kg/100 0,073 0,064 0,060 0,066 0,087 0,097 0,103 0,112 0,121 0,143 0,151 0,200 0,161 0,220 0,300 0,452 0,475 0,400 0,500 0,400 0,400 0,540 0,573 0,600 0,800 0,700 0,800 0,950 1,000 1,100 1,200 1,200 1,300 1,900 1,900 2,100 2,000 2,100 2,900 2,700 2,900 3,300 3,100 4,200 4,200 4,300 4,500 4,600 5,100 5,300 5,100 5,200 5,400 5,600 6,000
2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1800 1800 1400 1400 1000 1000 800 600 600 600 600 400 400 400 400 400 300 300 240 240 160 160 160 160 160 100 100 100 100 100 100 100 100 100 100 100 100 60 60 60
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 40 40 40 40 40 40 40 25 25 25 25 25 25 25 25 25 25 25 25 15 15 15
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
89
Tubular terminals and connectors, standard series Tubular terminals, standard series • For stranded round shaped conductors e.g. VDE 0295 class 2 • For preround sector shaped conuctors • Annealed material for easier crimping • Material: 99.9% electrolytic copper E-CU DIN 40500 • Surface: tin-plated available with and without sight hole e.g. 29 00 04/S (add xx xx xx/s when ordering)
Art. no. 290004 290006 290008 290009 290010 290012 290014 290016 290017 290018 290020 290022 290023 290024 290026 290028 290029 290030 290034 290036 290038 290040 290046 290048 290041 290043 290045 290047
CSS 120
150
185
240 300
400 500 625
M 8 10 12 14 16 20 10 12 14 16 20 12 14 16 20 12 14 16 12 14 16 20 16 20 16 20 16 20
d2 8,5 10,5 13,0 15,0 17,0 21,0 10,5 13,0 15,0 17,0 21,0 13,0 15,0 17,0 21,0 13,0 15,0 17,0 13,0 15,0 17,0 21,0 17,0 21,0 17,0 21,0 17,0 21,0
d1 15,0 15,0 15,0 15,0 15,0 15,0 16,5 16,5 16,5 16,5 16,5 19,0 19,0 19,0 19,0 21,0 21,0 21,0 23,5 23,5 23,5 23,5 27,0 27,0 31,0 31,0 34,0 34,0
d4 19,5 19,5 19,5 19,5 19,5 19,5 21,0 21,0 21,0 21,0 21,0 24,0 24,0 24,0 24,0 26,0 26,0 26,0 29,5 29,5 29,5 29,5 34,0 34,0 38,0 38,0 41,0 41,0
A v1 v2 26,0 2 1 26,0 2 1 26,0 2 1 26,0 2 1 26,0 2 1 26,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 35,0 4 2 35,0 4 2 35,0 4 2 44,0 4 2 44,0 4 2 44,0 4 2 44,0 4 2 44,0 4 2 44,0 4 2 70,0 4 2 70,0 4 2 70,0 4 2 70,0 4 2
l 51,0 51,0 51,0 52,0 54,0 63,0 56,0 57,0 57,0 58,0 66,0 65,0 65,0 65,0 69,0 72,0 72,0 72,0 87,0 87,0 87,0 87,0 90,0 90,0 103,0 103,0 108,0 108,0
B 28,0 28,0 28,0 28,0 30,0 36,0 31,0 31,0 31,0 31,0 36,0 35,0 35,0 35,0 39,0 39,0 39,0 39,0 43,0 43,0 43,0 43,0 49,0 49,0 55,0 55,0 60,0 60,0
c1 14,0 14,0 14,0 15,0 16,0 22,0 14,0 15,0 15,0 16,0 22,0 18,0 18,0 18,0 22,0 21,5 21,5 21,5 24,0 24,0 24,0 24,0 24,0 24,0 24,0 24,0 24,0 24,0
c2 14,0 14,0 14,0 15,0 16,0 22,0 14,0 15,0 15,0 16,0 22,0 18,0 18,0 18,0 22,0 19,0 19,0 19,0 24,0 24,0 24,0 24,0 24,0 24,0 24,0 24,0 24,0 24,0
kg/100 6,300 6,200 6,100 5,900 6,200 7,900 7,500 7,300 7,900 7,500 8,800 11,100 11,800 10,700 10,700 13,700 13,400 13,400 22,000 21,700 21,300 21,400 31,800 30,500 45,000 45,000 49,200 49,200
20 80 80 72 60 60 60 60 60 60 48 40 40 40 40 30 30 30 16 16 16 16 10 10 12 12 6 6
PU 15 15 15 18 15 15 15 15 15 15 12 20 20 20 20 15 15 15 8 8 8 8 5 5 6 6 3 3
1800 1400 1400 1000 1000 800 600 600 600 400 400 400 400 400 300 300
PU 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50
Angled tubular cable lugs 90°, standard series • For stranded round shaped conductors e.g. VDE 0295 class 2 • For preround sector shaped conuctors • Annealed material for easier crimping • Material: 99.9% electrolytic copper E-CU DIN 40500 • Surface: tin-plated
Art. no. 290932/90 290934/90 290936/90 290938/90 290940/90 290942/90 290944/90 290948/90 290950/90 290952/90 290954/90 290956/90 290958/90 290960/90 290962/90 290964/90
90
kg/100 I TL CSS
CSS 6 10
16
25
M 5 6 8 5 6 8 10 5 6 8 10 12 6 8 10 12
d2 5,3 6,5 8,5 5,3 6,5 8,5 10,5 5,3 6,5 8,5 10,5 13,0 6,5 8,5 10,5 13,0
Weight in kg/100 Length Total length Conductor cross section
d1 3,5 3,5 3,5 4,5 4,5 4,5 4,5 5,5 5,5 5,5 5,5 5,5 7,0 7,0 7,0 7,0
IN B c c1
d4 6,5 6,5 6,5 7,0 7,0 7,0 7,0 8,5 8,5 8,5 8,5 8,5 10,0 10,0 10,0 10,0
A v1 v2 9,0 1 9,0 1 9,0 1 10,0 1 10,0 1 10,0 1 10,0 1 13,0 1 1 13,0 1 1 13,0 1 1 13,0 1 1 13,0 1 1 15,0 2 1 15,0 2 1 15,0 2 1 15,0 2 1
Identification number Flange width Flange length Flange length1
l 21,0 21,0 23,0 22,0 22,0 25,0 27,0 26,0 27,0 29,0 31,0 33,0 30,0 32,0 34,0 35,0
c2 A M plug
B 10,0 12,0 15,0 12,0 12,0 15,0 17,0 12,0 12,0 15,0 17,0 19,0 14,0 16,0 18,0 19,0
c1 6,5 6,5 10,0 6,5 6,5 10,0 12,0 5,5 6,25 8,5 10,5 12,0 7,5 10,0 12,0 13,0
c2 7,5 7,5 10,0 7,5 7,5 10,0 12,0 6,5 7,5 9,5 11,5 13,0 7,5 10,0 12,0 13,0
kg/100 0,475 0,400 0,500 0,400 50,000 0,540 0,573 0,800 0,700 0,800 0,950 1,000 1,100 1,200 1 1,300
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Tubular terminals, standard series Angled tubular cable lugs 90°, standard series • For stranded round shaped conductors e.g. VDE 0295 class 2 • For preround sector shaped conuctors • Annealed material for easier crimping • Material: 99.9% electrolytic copper E-CU DIN 40500 • Surface: tin-plated
Art. no. 290966/90 290968/90 290970/90 290972/90 290976/90 290978/90 290980/90 290982/90 290986/90 290988/90 290990/90 290992/90 290994/90 290996/90 290998/90 291000/90 291002/90 290006/90 290008/90 290010/90 290014/90 290016/90 290018/90 290020/90 290022/90 290024/90 290028/90 290030/90
CSS 35
50
70
95
120 150
185 240
M 6 8 10 12 6 8 10 12 8 10 12 16 8 10 12 16 20 10 12 16 10 12 16 20 12 16 12 16
d2 6,5 8,5 10,5 13,0 6,5 8,5 10,5 13,0 8,5 10,5 13,0 17,0 8,5 10,5 13,0 17,0 21,0 10,5 13,0 17,0 10,5 13,0 17,0 21,0 13,0 17,0 13,0 17,0
d1 8,5 8,5 8,5 8,5 10,0 10,0 10,0 10,0 12,0 12,0 12,0 12,0 13,5 13,5 13,5 13,5 13,5 15,0 15,0 15,0 16,5 16,5 16,5 16,5 19,0 19,0 21,0 21,0
d4 12,0 12,0 12,0 12,0 14,0 14,0 14,0 14,0 16,5 16,5 16,5 16,5 18,0 18,0 18,0 18,0 18,0 19,5 19,5 19,5 21,0 21,0 21,0 21,0 24,0 24,0 26,0 26,0
A v1 v2 17,0 2 1 17,0 2 1 17,0 2 1 17,0 2 1 19,0 2 1 19,0 2 1 19,0 2 1 19,0 2 1 21,0 2 1 21,0 2 1 21,0 2 1 21,0 2 1 25,0 2 1 25,0 2 1 25,0 2 1 25,0 2 1 25,0 2 1 26,0 2 1 26,0 2 1 26,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 30,0 2 1 35,0 4 2 35,0 4 2
l 32,0 34,0 37,0 38,0 37,0 37,0 39,0 43,0 43,0 44,0 46,0 50,0 48,0 48,0 49,0 54,0 60,0 50,0 51,0 54,0 56,0 57,0 58,0 66,0 65,0 65,0 72,0 72,0
B 17,0 17,0 19,0 21,0 20,0 20,0 20,0 23,0 23,0 23,0 23,0 28,0 26,0 26,0 26,0 28,0 36,0 28,0 28,0 30,0 31,0 31,0 31,0 36,0 35,0 35,0 39,0 39,0
c1 7,5 10,0 12,0 13,0 10, 10,0 12,0 13,0 10,0 12,0 13,0 16,0 12,0 12,0 13,0 16,0 22,0 14,0 14,0 16,0 14,0 15,0 16,0 22,0 18,0 18,0 21,5 21,5
c2 7,5 10,0 12,0 13,0 10,0 10,0 12,0 13,0 10,0 12,0 13,0 16,0 12,0 12,0 13,0 16,0 22,0 14,0 14,0 16,0 14,0 15,0 16,0 22,0 18,0 18,0 19,0 19,0
kg/100 1,900 1,900 2,100 2,000 2,900 2,700 2,900 3,300 4,200 4,300 4,500 5,100 5,300 5,100 5,200 5,600 6,000 6,200 6,100 6,200 7,500 7,300 7,500 8,800 11,100 10,700 13,700 13,400
240 240 160 160 160 160 150 100 100 100 100 100 100 100 100 60 60 60 60 60 60 60 60 48 40 40 30 30
PU 40 40 40 40 40 40 25 25 25 25 25 25 25 25 25 15 15 15 15 15 15 15 15 12 20 20 15 15
kg/100 0,051 0,074 0,150 0,195 0,350 0,558 0,984 1,350 2,150 3,100 4,700 5,600 6,800 7,800 11,700 13,900 22,300 29,000
2000 2000 2000 1000 1000 600 500 200 200 100 50 50 60 40 30 20 10 10
PU 100 100 100 100 100 100 50 50 50 25 25 25 15 20 5 10 5 5
Butt connectors, standard series • Material: 99.9% E-CU DIN 40500 • Surface: tin-plated • Annealed material for easier crimping • For stranded conductors e.g. VDE 0295 class 2 • with buttmarks for precise cable insertion
Art. no. 291050 291052 291054 291056 291058 291060 291062 291064 291066 291068 291070 291072 291074 291076 291078 291080 291082 291084
CSS 0,75 1,5 2,5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400
d1 1,3 1,8 2,3 3,0 3,5 4,5 5,5 7,0 8,5 10,0 12,0 13,5 15,0 16,5 19,0 21,0 23,5 27,0
d4 v1 v2 2,8 1 3,3 1 4,2 1 5,0 1 6,5 1 7,0 1 8,5 1 1 10,0 2 1 12,0 2 1 14,0 2 1 16,5 2 1 18,0 2 1 19,5 2 1 21,0 2 1 24,0 2 1 26,0 4 2 29,5 4 2 34,0 4 2
TL 14 14 16 19 19 30 35 40 45 50 55 60 65 70 80 90 100 100
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
91
Connectors T-connectors, standard series • Material: 99.9% E-CU DIN 40500 • Annealed material for easier crimping • Surface: tin-plated • For stranded conductors e.g. VDE 0295 class 2
Art. no. 291330 291332 291334 291336 291338 291340 291342 291344 291348 291350 291352 291354 291356 291358 291360
CSS 1,5 2,5 4 6 10 16 25 35 50 70 95 120 150 185 240
d1 1,9 2,4 3,0 3,7 4,3 5,4 6,9 8,3 9,6 11,5 13,5 15,5 16,8 19,0 21,0
d4 3,9 4,4 5,0 5,5 6,7 7,8 9,4 11,3 13,1 15,3 17,5 20,0 21,3 24,0 26,0
A 12 12 12 14 14 21 23 30 34 35 36 38 44 45 52
TL 30 30 30 35 35 50 55 70 80 85 90 95 110 115 130
kg/100 0,400 0,400 0,600 1,100 1,500 2,300 2,200 3,800 6,000 10,100 11,600 17,800 17,900 28,300 31,200
PU 25 25 25 25 25 25 25 25 25 25 25 10 10 1 1
kg/100 0,450 0,520 0,480 0,700 0,800 1,650 3,000 5,100 8,050 10,700 15,700 23,400 18,900 25,000 31,100
PU 100 100 25 25 25 25 25 10 10 10 10 10 1 1 1
Cross connectors, standard series • Material: 99.9% E-CU DIN 40500 • Annealed material for easier crimping • Surface: tin-plated • For stranded conductors e.g. VDE 0295 class 2
Art. no. 291370 291372 291374 291376 291378 291380 291382 291384 291386 291388 291390 291392 291394 291396 291398
92
kg/100 I TL CSS
CSS 1,5 2,5 4 6 10 16 25 35 50 70 95 120 150 185 240
d1 1,9 2,4 3,0 3,7 4,3 5,4 6,9 8,3 9,6 11,5 13,5 15,5 16,8 19,0 21,0
d4 3,9 4,4 5,0 5,5 6,7 7,8 9,4 11,3 13,1 15,3 17,5 20,0 21,3 24,0 26,0
Weight in kg/100 Length Total length Conductor cross section
A 12 12 12 14 14 21 23 30 34 35 36 38 44 45 52
IN B c c1
TL 30 30 30 30 35 50 55 70 80 85 90 95 110 115 130
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Terminals Tubularcable lugs, nylon-insulated, standard series • Material: 99.9% E-CU DIN 40500 • Surface: tin-plated • annealed material for easier crimping • For stranded conductors e.g. VDE 0295 class 2 • With inspection hole • crimp directly with insulation
Art. no. 290800 290801 290802 290804 290806 290810 290812 290814 290816 290818 290820 290822 290824 290826 290830 290832 290834 290836 290840 290842 290844 290846 290848 290850 290852 290854 290856 290858 290860 290862 290864 290866 290868 290870 290872 290874 290876 290878 290880 290882 290884 290886
CSS 10
16
25
35
50
70
95
120
150
M 5 6 8 10 5 6 8 10 12 6 8 10 12 6 8 10 12 6 8 10 12 14 8 10 12 14 16 8 10 12 14 16 8 10 12 14 16 10 12 14 16 20
d2 5,5 6,5 8,5 10,5 5,5 6,5 8,5 10,5 13,0 6,5 8,5 10,5 13,0 6,5 8,5 10,5 13,0 6,5 8,5 10,5 13,0 15,0 8,5 10,5 13,0 15,0 17,0 8,5 10,5 13,0 15,0 17,0 8,5 10,5 13,0 15,0 17,0 10,5 13,0 15,0 17,0 21,0
d1 7,0 7,0 7,0 7,0 8,5 8,5 8,5 8,5 8,5 10,0 10,0 10,0 10,0 12,0 12,0 12,0 12,0 14,0 14,0 14,0 14,0 14,0 16,4 16,4 16,4 16,4 16,4 17,8 17,8 17,8 17,8 17,8 19,3 19,3 19,3 19,3 19,3 20,8 20,8 20,8 20,8 20,8
d4 9,0 9,0 9,0 9,0 10,5 10,5 10,5 10,5 10,5 12,0 12,0 12,0 12,0 14,0 14,5 14,5 14,5 16,5 16,5 16,5 16,5 16,5 18,9 18,9 18,9 18,9 18,9 20,8 20,8 20,8 20,8 20,8 22,3 22,3 22,3 22,3 22,3 23,8 23,8 23,8 23,8 23,8
A TL 17,0 35,5 17,0 35,5 17,0 42,0 17,0 46,0 21,0 39,5 21,0 41,3 21,0 45,5 21,0 49,5 21,0 54,0 24,0 46,5 24,0 51,0 24,0 55,0 24,0 57,0 27,0 49,5 27,0 54,0 27,0 59,0 27,0 61,0 32,0 59,0 32,0 59,0 32,0 63,0 32,0 68,0 32,0 71,5 33,5 65,5 33,5 66,5 33,5 70,5 33,5 73,5 33,5 78,5 40,0 74,0 40,0 74,0 40,0 76,0 40,0 79,5 40,0 84,0 41,5 80,5 41,5 80,5 41,5 80,5 41,5 82,5 41,5 85,5 48,0 88,0 48,0 89,0 48,0 90,0 48,0 92,0 48,0 106,0
kg/100 0,400 0,600 0,500 0,700 0,600 0,900 1,000 1,000 1,000 1,200 1,300 1,500 1,400 2,100 2,100 2,300 2,300 3,100 3,100 3,300 3,400 3,600 3,100 5,000 5,000 5,000 5,000 5,800 5,800 5,200 6,200 6,200 6,500 7,000 6,200 6,600 6,500 8,800 8,400 8,500 8,100 8,100
PU 100 100 100 50 100 50 50 50 50 25 25 25 100 25 25 25 25 25 25 25 25 20 50 15 15 50 50 25 25 25 25 25 25 25 20 20 20 20 20 20 20 20
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
93
Terminals and connectors Tubular cable lugs for fine-wired, high flexible conductors • For fine stranded conductors, DIN VDE 60228 e.g. VDE 0295 class 5/6 • Material: 99.9% E-CU DIN 40500 • Surface: tin-plated • With inspection hole
Art. no. 290250 290252 290254 290256 290258 290260 290262 290264 290266 290268 290270 290272 290276 290278 290280 290282 290284 290286 290288 290290 290292 290294 290296 290300 290302 290304 290306 290308 290310 290316 290318 290320 290322 290324 290326 290328 290330 290332 290334 290336 290338
CSS 10
16
25
35 50
70
95 120 150 185 240 300
M 6 8 10 12 6 8 10 12 6 8 10 12 8 10 12 8 10 12 16 8 10 12 16 10 12 16 10 12 16 12 16 20 12 16 20 12 16 20 12 16 20
d2 6,4 8,4 10,5 13,0 6,4 8,4 10,5 13,0 6,4 8,4 10,5 13,0 8,4 10,5 13,0 8,4 10,5 13,0 17,0 8,4 10,5 13,0 17,0 10,5 13,0 17,0 10,5 13,0 17,0 13,0 17,0 21,0 13,0 17,0 21,0 13,0 17,0 21,0 13,0 17,0 21,0
d1 5,0 5,0 5,0 5,0 6,0 6,0 6,0 6,0 8,0 8,0 8,0 8,0 9,0 9,0 9,0 11,0 11,0 11,0 11,0 13,0 13,0 13,0 13,0 15,0 15,0 15,0 17,0 17,0 17,0 19,0 19,0 19,0 21,0 21,0 21,0 24,0 24,0 24,0 26,0 26,0 26,0
d4 8,0 8,0 8,0 8,0 9,0 9,0 9,0 9,0 11,0 11,0 11,0 11,0 13,0 13,0 13,0 14,5 14,5 14,5 14,5 17,0 17,0 17,0 17,0 20,0 20,0 20,0 22,0 22,0 22,0 25,0 25,0 25,0 27,0 27,0 27,0 30,0 30,0 30,0 32,0 32,0 32,0
A 16,0 17,0 16,0 17,0 17,0 17,0 16,0 22,0 20,0 20,0 20,0 22,0 25,0 24,0 26,0 27,0 27,0 27,0 27,0 32,0 32,0 32,0 32,0 37,0 37,0 37,0 41,0 41,0 41,0 48,0 48,0 48,0 54,0 54,0 54,0 56,0 56,0 56,0 62,0 62,0 62,0
l 23,0 26,0 26,0 31,0 26,0 26,0 28,0 35,0 30,0 30,0 32,0 35,0 35,0 35,0 40,0 39,0 39,0 41,0 44,0 44,0 44,0 46,0 49,0 54,0 54,0 54,0 58,0 58,0 58,0 65,0 65,0 68,0 71,0 71,0 74,0 76,0 76,0 76,0 93,0 93,0 93,0
B 11,5 13,5 16,0 19,0 13,0 13,0 16,0 22,0 16,0 16,0 17,0 22,0 18,0 18,0 22,0 21,0 21,0 21,0 27,0 25,0 25,0 25,0 28,0 29,0 29,0 29,0 32,0 32,0 32,0 36,0 36,0 36,0 39,0 39,0 39,0 44,0 44,0 44,0 48,0 48,0 48,0
c1 6,0 7,0 8,0 10,0 7,0 7,0 10,0 12,0 7,0 8,0 10,0 12,0 10,0 10,0 12,0 11,0 11,0 12,0 15,0 11,0 11,0 12,0 15,0 15,0 15,0 15,0 15,0 15,0 15,0 15,0 15,0 19,0 15,0 15,0 19,0 19,0 19,0 19,0 21,0 21,0 21,0
c2 7,0 9,0 10,0 14,0 9,0 9,0 12,0 13,0 10,0 10,0 12,0 13,0 10,0 11,0 14,0 12,0 12,0 14,0 17,0 12,0 12,0 14,0 17,0 17,0 17,0 17,0 17,0 17,0 17,0 17,0 17,0 20,0 17,0 17,0 20,0 20,0 20,0 20,0 31,0 31,0 31,0
kg/100 0,700 1000 0,700 800 0,800 600 0,800 600 0,900 600 0,900 400 1,000 400 1,000 400 1,300 400 1,300 400 1,500 300 1,500 300 2,500 240 2,500 16,0 2,600 16,0 3,000 15 2,900 150 2,900 100 3,000 100 4,400 100 4,000 100 4,400 100 4,500 100 7,700 100 7,400 100 7,000 40 9,400 80 8,900 80 8,700 72 13,300 70 12,700 48 8,200 48 16,200 40 15,800 40 14,200 40 20,300 30 20,700 30 18,300 30 30,000 16 28,100 16 26,200 16
PU 100 100 100 100 100 100 100 100 50 50 50 50 40 40 40 25 25 25 25 25 25 25 25 25 25 10 20 20 18 12 12 10 20 20 15 15 15 15 8 8 8
Butt-connector for fine stranded high flexible conductors • For fine stranded conductors, DIN VDE 60228 e.g. VDE 0295 class 5/6 • Material: 99.9% E-CU DIN 40500 • Surface: tin-plated • With buttmarks for precise cable insertion
Art. no. 290350 290352 290354 290356 290358 290360 290362 290364 290366 290368 290370 290372 290374
94
kg/100 I TL CSS
CSS 10 16 25 35 50 70 95 120 150 185 240 300 400
d1 5,0 6,0 8,0 9,0 11,0 13,0 15,0 17,0 19,0 21,0 24,0 26,0 30,0
d4 8,0 9,0 11,0 13, 14,5 17, 20,0 22,0 25, 27,0 30,0 32,0 36,0
Weight in kg/100 Length Total length Conductor cross section
TL 30 35 35 35 45 45 45 55 65 70 70 75 100
IN B c c1
kg/100 0,800 1,000 1,300 2,100 3,700 4,600 7,300 6,900 9,800 13,600 16,000 7,000 11,100
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
600 500 200 200 100 50 50 50 50 36 12 6 6
PU 50 50 50 25 25 25 50 25 18 18 6 6 6
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Crimp terminals Cable lugs acc. to DIN 46235 • Material: 99,9% E-Cu DIN 40500 • Tube dimension acc. to DIN 46235 • Surface: bare • With marks for correct crimping • Annealed material for easier crimping
Art. no. 290001 290003 290005 290007 290011 290013 290015 290019 290021 290025 290027 290031 290033 290035 290037 290039 290042 290044 290049 290050 290051 290052 290053 290054 290055 290056 290057 290058 290059 290060 290061 290063 290064 290065 290066 290067 290068 290069 290070 290071 290072 290073 290074 290075 290076 290077 290078 290079 290080 290081 290082 290083 290084
CSS 6 10
16
25
35
50
70
95 120
150
185
240 300 400 500 625 800 1000
M 5 6 8 5 6 8 10 6 8 10 12 6 8 10 12 6 8 10 12 8 10 12 16 8 10 12 16 10 12 16 10 12 16 20 10 12 16 20 10 12 16 20 12 16 20 16 20 16 20 20 20 20 20
Id. 5 5 5 6 6 6 6 8 8 8 8 10 10 10 10 12 12 12 12 14 14 14 14 16 16 16 16 18 18 18 20 20 20 20 22 22 22 22 25 25 25 25 28 28 28 32 32 38 38 42 44 52 58
d2 5,3 6,4 8,4 5,3 6,4 8,4 10,5 6,4 8,4 10,5 13,0 6,4 8,4 10,5 13,0 6,4 8,4 10,5 13,0 8,4 10,5 13,0 17,0 8,4 10,5 13,0 17,0 10,5 13,0 17,0 10,5 13,0 17,0 21,0 10,5 13,0 17,0 21,0 10,5 13,0 17,0 21,0 13,0 17,0 21,0 17,0 21,0 17,0 21,0 21,0 21,0 21,0 21,0
d1 3,8 3,8 3,8 4,5 4,5 4,5 4,5 5,5 5,5 5,5 5,5 7,0 7,0 7,0 7,0 8,2 8,2 8,2 8,2 10,0 10,0 10,0 10,0 11,5 11,5 11,5 11,5 13,5 13,5 13,5 15,5 15,5 15,5 15,5 17,0 17,0 17,0 17,0 19,0 19,0 19,0 19,0 21,5 21,5 21,5 24,5 24,5 27,5 27,5 31,0 34,5 40,0 44,0
d4 A v1 v2 5,5 10,0 2 5,5 10,0 2 5,5 10,0 2 6,0 10,0 2 6,0 10,0 2 6,0 10,0 2 6,0 10,0 2 8,5 20,0 2 1 8,5 20,0 2 1 8,5 20,0 2 1 8,5 20,0 2 1 10,0 20,0 2 1 10,0 20,0 2 1 10,0 20,0 2 1 10,0 20,0 2 1 12,5 20,0 2 1 12,5 20,0 2 1 12,5 20,0 2 1 12,5 20,0 2 1 14,5 28,0 3 1 14,5 28,0 3 1 14,5 28,0 3 1 14,5 28,0 3 1 16,5 28,0 3 1 16,5 28,0 3 1 16,5 28,0 3 1 16,5 28,0 3 1 19,0 35,0 4 2 19,0 35,0 4 2 19,0 35,0 4 2 21,0 35,0 4 2 21,0 35,0 4 2 21,0 35,0 4 2 21,0 35,0 4 2 23,5 35,0 4 2 23,5 35,0 4 2 23,5 35,0 4 2 23,5 35,0 4 2 25,5 40,0 4 2 25,5 40,0 4 2 25,5 40,0 4 2 25,5 40,0 4 2 29,0 40,0 5 2 29,0 40,0 5 2 29,0 40,0 5 2 32,0 50,0 - 2 32,0 50,0 - 2 38,5 70,0 - 3 38,5 70,0 - 3 42,0 70,0 - 3 44,0 80,0 - 3 52,0 100,0 - 3 58,0 100,0 - 3
l 24,0 24,0 24,0 27,0 27,0 27,0 28,0 36,0 36,0 36,0 36,0 38,0 38,0 38,0 38,0 42,0 42,0 42,0 42,0 52,0 52,0 52,0 52,0 55,0 55,0 55,0 55,0 65,0 65,0 65,0 70,0 70,0 70,0 70,0 78,0 78,0 78,0 78,0 82,0 82,0 82,0 82,0 92,0 92,0 92,0 100,0 100,0 115,0 115,0 125,0 125,0 165,0 165,0
B 8,5 8,5 13,0 9,0 9,0 13,0 15,0 13,0 13,0 17,0 18,0 14,0 16,0 17,0 19,0 17,0 17,0 19,0 21,0 20,0 22,0 24,0 28,0 24,0 24,0 24,0 30,0 28,0 28,0 32,0 32,0 32,0 32,0 38,0 34,0 34,0 34,0 40,0 37,0 37,0 37,0 40,0 42,0 42,0 45,0 46,0 46,0 55,0 54,0 60,0 64,0 75,0 83,0
c1 kg/100 c2 6,5 0,300 7,5 7,5 0,300 8,0 10,0 0,300 10,0 7,0 0,700 8,5 7,5 0,600 8,5 10,0 0,300 10,0 10,0 0,500 10,0 7,5 1,100 8,0 10,0 1,100 10,0 12,0 1,200 12,0 13,0 1,200 13,0 7,5 1,300 8,0 10,0 1,400 10,0 12,0 1,600 12,0 13,0 1,400 13,0 7,5 2,700 8,0 10,0 2,900 10,0 12,0 3,000 12,0 13,0 2,800 13,0 10,0 4,500 10,0 12,0 4,400 12,0 13,0 4,400 13,0 16,0 4,300 16,0 10,0 5,900 10,0 12,0 6,000 12,0 13,0 5,300 13,0 16,0 5,600 16,0 12,0 8,900 12,0 13,0 8,500 13,0 16,0 8,700 16,0 15,0 11,100 16,0 16,0 11,000 17,0 19,0 10,600 20,0 21,0 11,100 22,0 15,0 15,800 16,0 16,0 15,600 17,0 19,0 15,700 20,0 21,0 15,800 22,0 15,0 17,200 16,0 16,0 18,300 17,0 19,0 17,700 20,0 21,0 18,900 22,0 16,0 26,400 17,0 19,0 26,900 20,0 21,0 26,900 22,0 19,0 33,000 22,0 19,0 33,000 22,0 25,0 70,200 25,0 25,0 45,100 25,0 25,0 76,600 25,0 25,0 78,000 25,0 30,0148,600 30,0 30,0195,200 30,0
800 800 800 800 800 800 800 500 400 400 400 300 300 300 300 150 150 150 150 100 100 100 100 100 100 100 80 60 60 60 40 40 40 30 30 30 30 24 24 24 24 20 16 16 16 8 8 6 6 6 1 1 1
PU 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 25 15 25 25 25 25 25 20 25 25 25 20 15 15 15 20 20 20 20 15 15 15 12 10 10 10 10 8 8 8 4 4 6 6 6 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
95
Crimp connectors Compression joints acc. to DIN 46267 Part 1 (for non-tension connections) • Material: 99.9% E-Cu DIN 40500 • Surface: bare • With marks for correct crimping • Annealed material for easier crimping
Art. no. 291520 291522 291524 291526 291528 291530 291532 291534 291536 291538 291540 291542 291544 291546 291548 291550 291552 291554
CSS 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 625 800 1000
Id. 5 6 8 10 12 14 16 18 20 22 25 28 32 38 42 44 52 58
d1 3,8 4,5 5,5 7,0 8,2 10,0 11,5 13,5 15,5 17,0 19,0 21,5 24,5 27,5 31,0 34,5 40,0 44,0
d4 v1 v2 5,5 2 6,0 2 8,5 2 1 10,0 2 1 12,5 2 1 14,5 3 1 16,5 3 1 19,0 4 2 21,0 4 2 23,5 4 2 25,5 4 2 29,0 5 2 32,0 - 2 38,5 - 3 42,0 - 3 44,0 - 3 52,0 - 3 58,0 - 3
TL 30 30 50 50 50 55 55 70 70 80 85 90 100 150 160 160 200 1000
kg/100 0,300 1600 0,600 1000 1,450 300 1,700 300 3,100 200 4,400 100 5,300 100 8,400 50 9,600 50 14,500 30 16,200 30 22,400 20 29,500 10 72,500 6 85,600 8 79,900 6 151,000 6 198,000 6
PU 100 100 50 50 50 25 25 15 25 15 5 10 5 8 5 1 1 1
Compression joints acc. to DIN 48085, Part 1 (for full-tension cable connections) • Material: 99.9% E-Cu DIN 40500 • Surface: bare • With marks for correct crimping • Annealed material for easier crimping • For full-tension cable connectiones, overhead line construction
Art. no. 291440 291442 291444 291446 291448 291450 291452 291454 291456 291458 291460 291462 291464
96
kg/100 I TL CSS
CSS 6 10 16 25 35 50 70 95 120 150 185 240 300
Id. 6 8 8 10 12 14 16 20 22 25 32 34 38
d1 3,8 4,5 5,5 7,0 8,2 10,0 11,5 13,5 15,0 16,5 18,5 21,0 23,5
Weight in kg/100 Length Total length Conductor cross section
d4 6,5 8,5 8,5 10,0 12,5 14,5 16,5 21,0 23,5 25,5 31,5 34,5 38,5
IN B c c1
v1 8 10 10 10 10 10 10 16 16 16, -
v2 8 8 8 10 12 14
TL 65 80 95 95 95 110 110 145 160 180 260 310 360
Identification number Flange width Flange length Flange length1
kg/100 1,200 2,800 2,300 2,600 5,800 7,000 9,000 8,600 29,200 117,100 17,000 163,700 29,200
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
PU 50 50 50 50 25 25 25 10 10 10 5 5 5
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Crimp terminals Cable lugs acc. to DIN 46235 • Material: 99,9% E-Cu DIN 40500 • Tube dimension acc. to DIN 46235 • Surface: tin-plated • With marks for correct crimping • Annealed material for easier crimping
Art. no. 290404 290406 290408 290410 290412 290414 290416 290418 290420 290422 290424 290426 290428 290430 290432 290434 290436 290438 290440 290442 290444 290446 290448 290450 290452 290454 290456 290458 290460 290462 290464 290466 290468 290470 290472 290474 290476 290478 290480 290482 290484 290486 290488 290490 290492 290494 290496 290498 290516 290518 290520 290522
CSS 6 10
16
25
35
50
70
95 120
150
185
240 300 400 500 625 800 1000
M 6 8 5 6 8 10 6 8 10 12 6 8 10 12 6 8 10 12 8 10 12 16 8 10 12 16 10 12 16 10 12 16 20 10 12 16 20 10 12 16 20 12 16 20 16 20 16 20 20 20 20 20
Id. 5 5 6 6 6 6 8 8 8 8 10 10 10 10 12 12 12 12 14 14 14 14 16 16 16 16 18 18 18 20 20 20 20 22 22 22 22 25 25 25 25 28 28 28 32 32 38 38 42 44 52 58
d2 6,4 8,4 5,3 6,4 8,4 10,5 6,4 8,4 10,5 13,0 6,4 8,4 10,5 13,0 6,4 8,4 10,5 13,0 8,4 10,5 13,0 17,0 8,4 10,5 13,0 17,0 10,5 13,0 17,0 10,5 13,0 17,0 21,0 10,5 13,0 17,0 21,0 10,5 13,0 17,0 21,0 13,0 17,0 21,0 17,0 21,0 17,0 21,0 21,0 21,0 21,0 21,0
d1 3,8 3,8 4,5 4,5 4,5 4,5 5,5 5,5 5,5 5,5 7,0 7,0 7,0 7,0 8,2 8,2 8,2 8,2 10,0 10,0 10,0 10,0 11,5 11,5 11,5 11,5 13,5 13,5 13,5 15,5 15,5 15,5 15,5 17,0 17,0 17,0 17,0 19,0 19,0 19,0 19,0 21,5 21,5 21,5 24,5 24,5 27,5 27,5 31,0 34,5 40,0 44,0
d4 A v1 v2 5,5 10,0 2 5,5 10,0 2 6,0 10,0 2 6,0 10,0 2 6,0 10,0 2 6,0 10,0 2 8,5 20,0 2 1 8,5 20,0 2 1 8,5 20,0 2 1 8,5 20,0 2 1 10,0 20,0 2 1 10,0 20,0 2 1 10,0 20,0 2 1 10,0 20,0 2 1 12,5 20,0 2 1 12,5 20,0 2 1 12,5 20,0 2 1 12,5 20,0 2 1 14,5 28,0 3 1 14,5 28,0 3 1 14,5 28,0 3 1 14,0 28,0 3 1 16,5 28,0 3 1 16,5 28,0 3 1 16,5 28,0 3 1 16,5 28,0 3 1 19,0 35,0 4 2 19,0 35,0 4 2 19,0 35,0 4 2 21,0 35,0 4 2 21,0 35,0 4 2 21,0 35,0 4 2 21,0 35,0 4 2 23,5 35,0 4 2 23,5 35,0 4 2 23,5 35,0 4 2 23,5 35,0 4 2 25,5 40,0 4 2 25,5 40,0 4 2 25,5 40,0 4 2 25,5 40,0 4 2 29,0 40,0 5 2 29,0 40,0 5 2 29,0 40,0 5 2 32,0 50,0 - 2 32,0 50,0 - 2 38,5 70,0 - 3 38,5 70,0 - 3 42,0 70,0 - 3 44,0 80,0 - 3 52,0 100,0 - 3 58,0 100,0 - 3
l 24,0 24,0 27,0 27,0 27,0 28,0 36,0 36,0 36,0 36,0 38,0 38,0 38,0 38,0 42,0 42,0 42,0 42,0 52,0 52,0 52,0 52,0 55,0 55,0 55,0 55,0 65,0 65,0 65,0 70,0 70,0 70,0 70,0 78,0 78,0 78,0 78,0 82,0 82,0 82,0 82,0 92,0 92,0 92,0 100,0 100,0 115,0 115,0 125,0 125,0 165 165,0
B 8,5 13,0 9,0 9,0 13,0 15,0 13,0 13,0 17,0 18,0 14,0 16,0 17,0 19,0 17,0 17,0 19,0 21,0 20,0 22,0 24,0 28,0 24,0 24,0 24,0 30,0 28,0 28,0 32,0 32,0 32,0 32,0 38,0 34,0 34,0 34,0 40,0 37,0 37,0 37,0 40,0 42,0 42,0 45,0 46,0 46,0 54,0 54,0 60,0 64,0 75,0 83,0
c1 kg/100 c2 7,5 0,300 8,0 10,0 0,300 10,0 7,0 0,400 8,5 7,5 0,400 8,5 10,0 0,400 10,0 10,0 0,400 10,0 7,5 1,200 8,0 10,0 1,200 10,0 12,0 1,100 12,0 13,0 1,200 13,0 7,5 1,300 8,0 10,0 1,400 10,0 12,0 1,600 12,0 13,0 1,500 13,0 7,5 2,700 8,0 10,0 2,900 10,0 12,0 2,900 2,0 13,0 2,700 13,0 10,0 4,400 10,0 12,0 4,500 12,0 13,0 4,400 13,0 16,0 4,200 16,0 10,0 5,900 10,0 12,0 5,900 12,0 13,0 5,900 13,0 16,0 5,800 16,0 12,0 8,800 12,0 13,0 8,900 13,0 16,0 8,700 16,0 15,0 11,000 16,0 16,0 11,100 17,0 19,0 10,500 20,0 21,0 11,300 22,0 15,0 15,600 16,0 16,0 15,700 17,0 19,0 15,900 20,0 21,0 16,000 22,0 15,0 18,000 16,0 16,0 18,400 17,0 19,0 18,400 20,0 21,0 17,700 22,0 16,0 26,500 17,0 19,0 26,600 20,0 21,0 27,600 22,0 19,0 34,300 22,0 19,0 33,100 22,0 25,0 69,800 25,0 25,0 66,400 25,0 25,0 82,600 25,0 25 79,000 25,0 30,0139,400 30,0 30,0195,000 30,0
800 800 800 800 800 800 500 400 400 400 300 300 300 300 150 150 150 150 100 100 100 100 100 100 100 80 60 60 60 40 40 40 25 30 30 30 25 24 24 24 20 16 16 10 10 10 8 8 8 6 10 10
PU 100 100 100 100 100 100 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 20 25 25 25 20 20 15 15 20 20 20 25 15 15 15 25 10 10 10 10 8 8 10 5 5 3 3 6 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
97
Crimp terminals Cable lugs with 2 oval holes acc. to DIN 46235 • Material: 99,9% E-Cu DIN 40500 • Tube dimension acc. to DIN 46235 • Surface: tin-plated • With marks for correct crimping • version with 2 oval holes • Annealed material for easier crimping
Art. no. 290550 290552 290554 290556 290558 290560
CSS 70 95 120 150 185 240
M 12 12 12 12 12 12
Id. 16 18 20 22 25 28
d2 13,0 13,0 13,0 13,0 13,0 13,0
d1 11,5 13,5 15,5 17,0 19,0 21,5
d4 16,5 19,0 21,0 23,5 25,5 29,0
A 28,0 35,0 35,0 35,0 40,0 40,0
l 55,0 65,0 70,0 78,0 82,0 92,0
B 24,0 28,0 32,0 34,0 37,0 42,0
c1 13,0 13,0 16,0 16,0 16,0 16,0
c2 13,0 13,0 17,0 17,0 17,0 17,0
kg/100 10,800 14,800 18,600 26,200 26,800 40,200
PU 25 20 25 25 10 10
B 8,5 8,5 9,0 9,0 13,0 13,0 13,0 17,0 18,0 14,0 16,0 17,0 19,0 17,0 19,0 21,0 20,0 22,0 24,0 28,0 24,0 24,0 24,0 30,0 28,0 28,0 32,0 32,0 32,0 32,0 38,0 34,0 34,0 34,0 40,0 37,0 37,0 37,0 40,0 42,0 42,0 45,0
c1 6,5 7,5 7,0 7,5 10,0 7,5 10,0 12,0 13,0 7,5 10,0 12,0 13,0 10,0 12,0 13,0 10,0 12,0 13,0 16,0 10,0 12,0 13,0 16,0 12,0 13,0 16,0 15,0 16,0 18,0 21,0 15,0 16,0 19,0 21,0 15,0 16,0 19,0 21,0 16,0 19,0 21,0
c2 9,0 10,0 10,0 10,0 13,0 11,0 13,0 15,0 18,0 11,0 13,0 15,0 18,0 13,0 15,0 18,0 16,0 16,0 18,0 22,0 14,0 16,0 18,0 22,0 17,0 18,0 22,0 17,0 18,0 22,0 24,0 17,0 18,0 22,0 24,0 22,0 22,0 22,0 24,0 22,0 22,0 24,0
kg/100 0,400 0,300 0,400 0,500 1,100 1,200 1,100 1,200 1,200 1,500 1,500 1,500 1,500 2,600 2,900 2,900 4,100 4,200 4,500 4,100 5,400 5,500 6,000 5,600 8,400 8,700 8,700 10,000 10,000 10,200 9,800 13,100 13,200 14,100 13,700 16,400 15,600 18,600 17,500 22,400 22,900 21,000
PU 100 100 100 100 100 50 50 50 50 50 50 50 50 25 25 25 25 20 20 20 30 30 15 30 10 10 10 20 20 20 15 15 15 15 10 10 10 10 10 10 10 10
Angled cable lugs 90° acc. to DIN 46325 • Material: 99,9% E-Cu DIN 40500 • Tube dimension acc. to DIN 46235 • Surface: tin-plated • With marks for correct crimping • Annealed material for easier crimping
Art. no. 291700 291702 291704 291706 291708 291710 291712 291714 291716 291718 291720 291722 291724 291726 291728 291730 291732 291734 291736 291738 291740 291742 291744 291746 291748 291750 291752 291754 291756 291758 291760 291762 291764 291766 291768 291770 291772 291774 291776 291778 291780 291782
98
kg/100 I TL CSS
CSS 6 10 16
25
35 50
70
95 120
150
185
240
M 5 6 5 6 8 6 8 10 12 6 8 10 12 8 10 12 8 10 12 16 8 10 12 16 10 12 16 10 12 16 20 10 12 16 20 10 12 16 20 12 16 20
Id. 5 5 6 6 6 8 8 8 8 10 10 10 10 12 12 12 14 14 14 14 16 16 16 16 18 18 18 20 20 20 20 22 22 22 22 25 25 25 25 28 28 28
Weight in kg/100 Length Total length Conductor cross section
d2 5,3 6,4 5,3 6,4 8,4 6,4 8,4 10,5 13,0 6,4 8,4 10,5 13,0 8,4 10,5 13,0 8,4 10,5 13,0 17,0 8,4 10,5 13,0 17,0 10,5 13,0 17,0 10,5 13,0 17,0 21,0 10,5 13,0 17,0 21,0 10,5 13,0 17,0 21,0 13,0 17,0 21,0
IN B c c1
d1 d4 3,8 5,5 3,8 5,5 4,5 6,0 4,5 6,0 4,5 6,0 5,5 8,5 5,5 8,5 5,5 8,5 5,5 8,5 7,0 10,0 7,0 10,0 7,0 10,0 7,0 10,0 8,2 12,5 8,2 12,5 8,2 12,5 10,0 14,0 10,0 14, 10,0 14,5 10,0 14,5 11,5 16,5 11,5 16,5 11,5 16,5 11,5 16,5 13,5 19,0 13,5 19,0 13,5 19,0 15,5 21,0 15,5 21,0 15,5 21,0 15,5 21,0 17,0 23,5 17,0 23,5 17,0 23,5 17,0 23,5 19,0 25,5 19,0 25,5 19,0 25,05 19,0 25,5 21,5 29,0 21,5 29,0 21,5 29,0
A v1 v2 10,0 2 10,0 2 10,0 2 10,0 2 10,0 2 20,0 2 1 20,0 2 1 20,0 2 1 20,0 2 1 20,0 2 1 20,0 2 1 20,0 2 1 20,0 2 1 20,0 2 1 20,0 2 1 20,0 2 1 28,0 3 1 28,0 3 1 28,0 3 1 28,0 3 1 28,0 3 1 28,0 3 1 28,0 3 1 28,0 3 1 35,0 4 2 35,0 4 2 35,0 4 2 35,0 4 2 35,0 4 2 35,0 4 2 35,0 4 2 35,0 4 2 35,0 4 2 35,0 4 2 35,0 4 2 40,0 4 2 40,0 4 2 40,0 4 2 40,0 4 2 40,0 5 2 40,0 5 2 40,0 5 2
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Crimp connectors Compression joints acc. to DIN 46267, Part 1 (for non-tension connections) • Material: 99.9% E-CU DIN 40500 • Tube dimension acc. to DIN • Surface: tin-plated • Annealed material for easier crimping • For stranded conductors e.g. VDE 0295 class 2 • With buttmarks for precise cable insertion
Art. no. 291521 291523 291525 291527 291529 291531 291533 291535 291537 291539 291541 291543 291545 291547 291549 291551 291553 291555
CSS 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 625 800 1000
Id. 5 6 8 10 12 14 16 18 20 22 25 28 32 38 42 44 52 58
d1 3,8 4,5 5,5 7,0 8,2 10,0 11,5 13,5 15,5 17,0 19,0 21,5 24,5 27,5 31,0 34,5 40,0 44,0
d4 v1 v2 5,5 2 6,0 2 8,5 2 1 10,0 2 1 12,5 2 1 14,5 3 1 16,5 3 1 19,0 4 2 21,0 4 2 23,5 4 2 25,5 4 2 29,0 5 2 32,0 - 2 38,5 - 3 42,0 - 3 44,0 - 3 52,0 - 3 58,0 - 3
TL 30 30 50 50 50 55 55 70 70 80 85 90 100 150 160 160 200 1000
kg/100 0,300 1600 0,600 1000 1,450 300 1,600 300 3,000 200 4,100 100 5,400 100 8,300 50 9,500 50 14,200 30 16,900 30 22,600 20 29,700 10 74,000 8 89,100 5 79,000 1 151,300 1 198,000 1
PU 100 100 50 50 50 25 25 25 25 15 5 10 5 8 5 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
99
Nickel terminals Tubular cable lugs of pure nickel, ring type • Material: nickel • Temperature resistant to 500° C
Art. no. 292560 292562 292564 292566 292568 292570 292572 292574
CSS 0,5-1,0 1,5-2,5 4-6
M 4 5 4 5 6 4 5 6
d2 4,3 5,3 4,3 5,3 6,5 4,3 5,3 6,5
d1 1,6 1,6 2,3 2,3 2,3 3,6 3,6 3,6
A 13,0 14,0 13,0 14,0 16,0 18,0 19,0 19,0
l 6,0 6,0 6,0 6,0 6,0 8,0 8,0 8,0
B 6,5 7,5 7,0 8,5 9,5 8,5 9,5 9,5
kg/100 0,105 0,086 0,109 0,122 0,134 0,300 0,200 0,300
PU 100 100 100 100 100 100 100 100
B 6,5 7,5 7,0 8,5 9,5 8,5 9,5
kg/100 0,073 0,070 0,100 0,100 0,110 0,300 0,300
PU 100 100 100 100 100 100 100
kg/100 0,101 0,110 0,190
PU 100 100 100
Tubular terminals of pure nickel, forke type • Material: nickel • Temperature resistant to 500° C
Art. no. 292580 292582 292584 292586 292588 292590 292592
CSS 0,5-1,0 1,5-2,5 4,0-6,0
M 4 5 4 5 6 4 5
d2 4,3 5,3 4,3 5,3 6,5 4,3 5,3
d1 1,6 1,6 2,3 2,3 2,3 3,6 3,6
A 13,0 14,0 13,0 14,0 16,0 18,0 19,0
l 6,0 6,0 6,0 6,0 6,0 8,0 8,0
Butt-connectors, made from pure nickel • Material: nickel • Temperature resistant to 500° C • With buttmarks for precise able insertion
Art. no. 292596 292598 292600
100
kg/100 I TL CSS
CSS 0,5-1 1,5-2,5 4-6
d1 1,6 2,3 3,6
Weight in kg/100 Length Total length Conductor cross section
TL 15 15 15
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Terminals and connectors Al compression cable lugs • Material: AI 99,5% • Surface: bare • Tube dimension to DIN 46329 • With marks for correct crimping • For non-tension connections of Al-cables DIN 48201, part 1 and DIN EN 50182 • For pre-rounded sm/se sector shaped conductors
Art. no. 292904 292906 292908 292910 292912 292914 292916 292918 292920 292922 292924 292926 292928 292930 292932 292934 292936 292938 292940 292942 292944 292946 292948 292950
CSS rm/sm 16
se 25
25
35
35
50
50
70
70
95
95
120
120
150
150
185
185
240
240
300
M 8 10 8 10 10 12 10 12 10 12 10 12 16 12 16 12 16 20 12 16 20 12 16 20
Id. 12 12 12 12 14 14 16 16 18 18 22 22 22 22 22 25 25 25 28 28 28 32 32 32
d2 8,5 10,5 8,5 10,5 10,5 13,0 10,5 13,0 10,5 13,0 10,5 13,0 17,0 13,0 17,0 13,0 17,0 21,0 13,0 17,0 21,0 13,0 17,0 21,0
d1 v1 v2 5,8 4 2 5,8 4 2 6,8 4 2 6,8 4 2 8,0 5 2 8,0 5 2 9,8 5 2 9,8 5 2 11,2 6 3 11,2 6 3 13,2 6 3 13,2 6 3 13,2 6 3 14,7 6 3 14,7 6 3 16,3 6 3 16,3 6 3 16,3 6 3 18,3 6 3 18,3 6 3 18,3 6 3 21,0 8 3 21,0 8 3 21,0 8 3
l 52,0 52,0 60,0 60,0 67,0 67,0 72,0 72,0 86,0 86,0 90,0 90,0 90,0 91,0 91,0 103,0 103,0 103,0 106,0 106,0 106,0 116,0 116,0 116,0
B 18,0 18,0 18,0 18,0 21,0 21,0 25,0 25,0 28,0 28,0 32,0 32,0 34,0 32,0 34,0 35,0 35,0 41,0 40,0 40,0 40,0 45,0 45,0 45,0
kg/100 1,400 1,400 1,400 1,400 2,100 2,000 2,700 2,700 4,400 4,200 6,300 6,400 6,400 6,700 7,000 9,400 8,300 9,100 11,700 11,600 12,000 16,900 16,900 16,200
PU 50 50 50 50 50 50 50 50 40 40 25 30 25 25 25 20 20 20 15 15 15 10 12 10
kg/100 2,000 2,000 2,800 2,600 3,900 3,500 5,900 5,600 6,400 6,600 8,400 8,300 8,200 10,400 10,500 12,000 16,100 15,900 15,200 17,200 18,500 17,300 24,700 23,000 23,500 43,600 33,200 43,000
PU 50 50 50 50 25 25 25 25 25 25 25 25 20 20 20 20 10 10 10 10 10 10 10 10 10 6 6 6
Al compression cable lugs acc. to DIN 46329, longitudinally sealed • Material: AI 99,5% • Surface: bare • Design with oil stop • Tube dimension to DIN 46329 • With marks for correct crimping • For non-tension connections of Al-cables DIN 48201, part 1 and DIN EN 50182 • For pre-rounded sm/se sector shaped conductors
Art. no. 292770 292772 292774 292776 292778 292780 292782 292784 292786 292788 292790 292792 292794 292796 292798 292800 292802 292804 292806 292808 292810 292812 292814 292816 292818 292820 292822 292824
CSS rm/sm 35
se 50
50
70
70
95
95
120
120
150
150
185
185
240
240
300
300
-
400
-
500
-
M 10 12 10 12 10 12 10 12 12 16 10 12 16 10 12 16 12 16 20 12 16 20 12 16 20 12 16 20
Id. 14 14 16 16 18 18 22 22 22 22 25 25 25 28 28 28 32 32 32 34 34 34 38 38 38 44 44 44
d2 10,5 13,0 10,5 13,0 10,5 13,0 10,5 13,0 13,0 17,0 10,5 13,0 17,0 10,5 13,0 17,0 13,0 17,0 21,0 13,0 17,0 21,0 13,0 17,0 21,0 13,0 17,0 21,0
d1 v1 v2 8,0 5 2 8,0 5 2 9,8 5 2 9,8 5 2 11,2 6 3 11,2 6 3 13,2 6 3 13,2 6 3 14,7 6 3 14,7 6 3 16,3 6 3 16,3 6 3 16,3 6 3 18,3 6 3 18,3 6 3 18,3 6 3 21,0 8 3 21,0 8 3 21,0 8 3 23,3 8 3 23,3 8 3 23,3 8 3 26,0 - 4 26,0 - 4 26,0 - 4 29,0 - 4 29,0 - 4 29,0 - 4
l 62,0 62,0 62,0 62,0 72,0 72,0 75,0 75,0 80,0 80,0 90,0 90,0 90,0 91,0 91,0 91,0 103,0 103,0 103,0 103,0 103,0 103,0 116,0 116,0 116,0 122,0 155,0 122,0
B 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 44,0 44,0 44,0
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
101
Al-Crimp connector DIN 46267 Part 2 • Material: AI 99,5% • Surface: bare • Design with oil stop • Manufactured DIN 46267, part 2 • With marks for correct crimping • For non-tension connections of Al conductors to DIN 48201, DIN EN 50182 • For pre-rounded sm/se sector shaped conductors
Art. no. 293542 293544 293546 293548 293550 293552 293554 293556 293558
102
kg/100 I TL CSS
CSS rm/sm 25 35 50 70 95 120 150 185 240
se 35 50 70 95 120 150 185 240 300
Weight in kg/100 Length Total length Conductor cross section
d1 6,8 8,0 9,8 11,2 13,2 14,7 16,3 18,3 20,0
IN B c c1
v1 v2 8 4 10 4 10 4 12 6 12 6 12 6 12 6 12 6 16 6
TL 70 85 85 105 105 105 125 125 145
Id./Al 12 14 16 18 22 22 25 28 32
Identification number Flange width Flange length Flange length1
kg/100 1,600 2,700 3,300 5,800 8,200 7,900 11,500 12,300 21,200
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
PU 100 100 50 50 25 25 25 20 15
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Terminals and connectors Al and Cu cable lugs, longitudinally sealed • Material: Al 99,5% copper screw-on palm E-Cu 99,9% • Surface: bare • With marking for correct crimping • Barrier design with oil stop • For pre-rounded sector shaped conductors • For non-tension connections of Al-cables DIN 48201, part 1 and DIN EN 50182
Art. no. 293300 293302 293304 293306 293308 293310 293312 293314 293316 293318 293320 293322 293324 293326 293328 293330 293332 293334 293336
CSS rm/sm 25
se 35
35
50
50
70
70
95
95
120
120
150
150
185
185
240
240
300
M 8 10 12 10 12 10 12 10 12 12 16 12 16 12 16 12 16 12 20
Id. 12 12 12 14 14 16 16 18 18 22 22 22 22 25 25 28 28 32 32
d2 10,5 10,5 13,0 10,5 13,0 10,5 13,0 10,5 13,0 13,0 17,0 13,0 17,0 13,0 17,0 13,0 17,0 13,0 17,0
d1 v1 v2 6,8 4 2 6,8 4 2 6,8 4 2 8,0 5 2 8,0 5 2 9,8 5 2 9,8 5 2 11,2 6 3 11,2 6 3 13,2 6 3 13,2 6 3 14,7 6 3 14,7 6 3 16,3 6 3 16,3 6 3 18,3 6 3 18,3 6 3 21,0 8 3 21,0 8 3
l 61,0 61,0 61,0 71,0 71,0 72,0 72,0 82,0 82,0 85,0 85,0 87,0 87,0 104,0 104,0 105,0 105,0 120,0 120,0
B 23,0 23,0 23,0 23,0 23,0 25,0 25,0 26,0 26,0 30,0 30,0 30,0 30,0 36,0 36,0 36,0 36,0 36,0 36,0
kg/100 2,600 2,500 2,900 3,200 3,500 3,400 4,100 6,100 5,500 8,200 8,500 8,500 8,700 11,000 11,200 14,100 14,300 18,000 29,000
PU 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 10 10 5 5
kg/100 1,600 2,800 3,800 5,400 10,600 9,000 10,900 15,700 17,000 23,200
PU 1 1 1 1 1 1 1 1 1 1
Al/Cu non-tension compession joints with Cu bolt • Material: Al 99,5% E-Cu 99,9% • Surface: bare • Marking for correct crimping • Barrier design with oil stop • For pre-rounded sector shaped conductors • For non-tension connections of Al-cables DIN 48201, part 1 and DIN EN 50182 • For non-tension Al-connections in Cu clamps
Art. no. 293960 293962 293964 293966 293968 293970 293972 293974 293976 293978
CSS rm/sm 25 35 50 70 95 120 150 185 240 300
se 35 35 50 70 120 150 185 240 300 -
d1 6,8 8,0 10,0 11,5 13,2 15,0 16,5 18,5 21,5 23,5
d4 12,0 14,0 16,0 18,5 23,0 23,0 25,5 28,5 32,5 34,5
TL 58 71 74 87 91 97 108 116 128 131
l 20,0 22,0 25,0 30,0 33,0 38,0 38,0 44,0 44,0 46,0
Øbo. Ørope 6 6,3 7 7,5 8 9,0 10 10,0 12 12,5 12 14,0 12 15,8 14 17,5 16 20,3 18 22,5
Id./Al 12 14 16 18 22 22 25 28 32 34
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
103
Al-Cu reducing connectors • for connections with tension relief of Al/Cu conductors to DIN 28201 • Material: Al 99,5%, DIN 40501, E-Cu DIN 40500 • Surface: bare pickled
Art. no. 293578 293582 293584 293598 293600 293606 293608 293610 293622 293624 293626 293634 293636 293638 293652 293654 293656 293664 293666 293678 293680 293688 293690
CSS rm/sm 25 35 50 70 95 120 150 185 240 300
rm/sm CU 16 16 25 25 35 25 35 50 35 50 70 50 70 95 95 120 150 120 150 150 185 185 240
se 35 50 70 95 120 150 185 240 300 400
TL 61 71 71 71,5 71,5 79 79 85 79 85 87 87 89 97 107,5 107,5 124,0 108 113 124 127 128 128
Cu 5,5 5,5 0,0 7,0 8,2 7,0 8,2 10,0 8,2 10 11,5 10,0 11,5 13,5 13,5 15,5 17,5 15,5 17,0 17,0 19,0 185 21,5
Al 7,6 8,0 8 9,8 9,8 11,2 11,2 11,2 13,2 13,2 13,2 14,7 14,7 14,7 16,3 16,3 16,3 18,3 18,3 21,0 21,0 19,0 23,5
Id./Cu 8 8 10 10 12 10 12 14 12 14 16 14 16 18 18 20 22 20 22 22 25 25 28
Id./Al 12 14 14 16 16 18 18 18 22 22 22 22 22 22 25 25 25 28 28 32 32 34 34
kg/100 1,600 2,100 2,500 3,100 3,300 4,400 5,500 5,700 6,000 8,900 8,200 7,900 9,500 10,000 11,700 14,200 16,700 16,930 19,500 23,300 25,500 32,700 37,500
PU 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
kg/100 11,100 11,100 11,100 11,100
PU 50 50 10 50
Cupal washer • Compound material made from aluminium and copper
Art. no. 293810 293812 293814 293816
104
kg/100 I TL CSS
Ø 10 12 14 16
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Crimp connectors 10 - 30 KV Al-compession joints, medium voltage 10-30 KV • Material: AL 99,5% • Surface: bare • For non-tension connections of medium-voltage Al-cables, 10 - 30 KV • With bevelled edges for reduced winding ependiture for the assambly • With marking for correct crimping • Tube dimension to DIN 46267 part 2
Art. no. 293022 293024 293026 293028 293030 293032 293034 293036 293038 293040
CSS rm/sm 35 50 70 95 120 150 185 240 300 400
se 50 70 95 120 150 185 240 300 -
d1 8,0 9,8 11,2 13,2 14,7 16,3 18,3 21,0 23,3 26,0
v1 v2 8 4 8 4 8 4 8 4 8 4 8 4 10 4 10 4 10 4 10 6
TL 90 90 95 100 105 105 125 125 125 150
Id./Al 14 16 18 22 22 25 28 32 34 38
kg/100 2,800 3,500 5,000 7,600 8,400 12,000 15,600 19,100 30,700 29,900
PU 1 1 1 1 1 1 1 1 1 1
AL compression joints, medium voltage 10-30 KV, longitudinally sealed • Material: AL 99,5% • Surface: bare • Barrier design with oil stop • For non-tension connections of medium-voltage Al-cables, 10 - 30 KV • With bevelled edges for reduced winding ependiture for the assambly • With marking for correct crimping • Tube dimension to DIN 46267 part 2
Art. no. 293002 293004 293006 293008 293010 293012 293014 293016 293018 293020
CSS rm/sm 35 50 70 95 120 150 185 240 300 400
se d1 50 8,2 70 10,0 95 11,5 120 13,5 150 15,0 185 16,5 240 18,5 300 21,3 - 23,6 - 26,25
v1 v2 8 4 8 4 8 4 8 4 8 4 8 4 10 2 10 4 10 4 10 6
TL 95 95 100 105 110 110 130 130 135 165
Id./Al 14 16 18 22 22 25 28 32 34 38
kg/100 2,700 3,300 4,600 7,100 7,400 8,700 13,400 15,700 16,300 25,800
PU 1 1 1 1 1 1 1 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
105
AL reduction compression joints, medium voltage 10-30 KV, longitudinally sealed • Material: AL 99,5% • Surface: bare • Barrier design with oil stop • For non-tension connections of medium-voltage Al-cables, 10 - 30 KV • With bevelled edges for reduced winding ependiture for the assambly • With marking for correct crimping • Tube dimension to DIN 46267 part 2
Art. no. 293042 293044 293046 293048 293050 293052 293054 293056 293058 293060 293062 293064 293066 293068 293070 293072 293074 293076 293078 293080 293082 293084 293086 293088 293090 293092 293094 293096 293098 293100 293102 293104 293106 293108 293110 293112 293114 293116 293118 293120 293122 293124
106
kg/100 I TL CSS
CSS rm/sm 35 50 70 95
120
150
185
240
300 400
CSS/red. 25 25 35 25 35 50 25 35 50 70 25 35 50 70 95 25 35 50 70 95 120 25 35 50 70 95 120 150 25 35 50 70 95 120 150 185 150 185 240 185 240 300
Weight in kg/100 Length Total length Conductor cross section
d1 8,0 9,8 9,8 11,2 11,2 11,2 13,2 13,2 13,2 13,2 14,7 14,7 14,7 14,7 14,7 16,3 16,3 16,3 16,3 16,3 16,3 18,3 18,3 18,3 18,3 18,3 18,3 18,3 21,0 21,0 21,0 21,0 21,0 21,0 21,0 21,0 23,3 23,3 23,3 26,0 26,0 26,0
IN B c c1
d1/red. 6,8 6,8 8,0 6,8 8,0 9,8 6,8 8,0 9,8 11,2 6,8 8,0 9,8 11,2 13,2 6,8 8,0 9,8 11,2 13,2 14,7 6,8 8,0 9,8 11,2 13,2 14,7 16,3 6,8 8,0 9,8 11,2 13,2 14,7 16,3 18,3 16,3 18,3 21,0 18,3 21,0 23,3
v1 v2 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 8 4 - 4 - 4 - 4 - 4 - 4 10 4 10 4 - 4 - 4 - 4 - 4 - 4 - 4 10 4 10 4 10 4 10 4 10 4 - 6 - 6 - 6
Identification number Flange width Flange length Flange length1
TL 95 95 95 100 100 100 105 105 105 105 110 110 110 110 110 110 110 110 110 110 110 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 135 135 135 165 165 165
c2 A M plug
Id./Al 14 16 16 18 18 18 22 22 22 22 22 22 22 22 22 25 25 25 25 25 25 28 28 28 28 28 28 28 32 32 32 32 32 32 32 32 34 34 34 38 38 38
kg/100 2,800 3,600 3,400 4,900 4,700 4,400 8,200 8,000 7,600 7,400 8,000 7,800 7,900 7,100 6,500 10,700 10,500 10,100 9,800 10,300 11,100 16,100 15,800 15,400 15,000 14,400 13,700 13,000 21,000 21,000 20,500 20,100 19,500 19,000 18,000 19,200 21,000 20,000 18,700 35,000 33,000 31,000
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Screw terminals 10 - 30 KV AL screw terminals medium voltage 10-30 KV • Material: AL 99,5% • for tension relief connections of Al medium-voltage cables • Tin-plated surface
Art. no. 293140 293142 293144 293146 293148 293150 293152 293154 293156
CSS 16-95 50-150 95-240 120-300 185-400
M 12 12 16 12 16 12 16 12 16
d1 12,5 15,5 15,5 20,0 20,0 25,0 25,0 26,0 26,0
d4 24,0 30,0 30,0 33,0 33,0 38,0 38,0 42,0 42,0
A 32,0 35,0 35,0 56,0 56,0 67,0 67,0 82,0 82,0
TL 60 79 79 95 95 100 100 115 115
1 1 1 2 2 2 2 3 3
kg/100 6,400 13,900 14,500 23,700 24,400 33,300 32,700 48,000 48,200
PU 1 1 1 1 1 1 1 1 1
kg/100 9,800 17,700 33,500 49,000 78,900
PU 1 1 1 1 1
AL screw connectors medium voltage 10-30 KV • Material: AL 99,5% • Screws: Tin-galvanised brass • Tin-plated surface
Art. no. 293130 293132 293134 293136 293138
CSS 16-95 50-150 95-240 120-300 185-400
d1 12,5 15,5 20,0 25,0 26,0
d4 24,0 30,0 33,0 38,0 42,0
TL 70 85 120 142 170
2 2 4 4 6
LQCSS
Advantages of the tear-off screw
AL Connectors Terminals
rm
re
CU sm
rm
sm
16 - 95 16.50/95 50 - 150 50 - 150 95 - 240 95 - 240 120 - 300 120 - 300 155 - 400 185 - 240/400
25 - 70 50 - 120 95 - 185 120 - 240 185 - 300
16 - 95 35 - 120 95 - 240 120 - 300 185 - 300
25 - 70 50 - 120 95 - 185 120 - 240 185 - 300
1 1 2 2 3
16 - 95 16.50/95 50 - 150 50 - 150 95 - 240 95 - 240 120 - 300 120 - 300 155 - 400 185 - 240/400
25 - 70 50 - 120 95 - 185 120 - 240 185 - 300
16 - 95 35 - 120 95 - 240 120 - 300 185 - 300
25 - 70 50 - 120 95 - 185 120 - 240 185 - 300
2 2 4 4 6
Screw lugs and connectors
• simple assembly • the screw head shears off when clamping torque is right • no torque key required • screw can be detached using the hexagon socket 1. The screw is fitted with several tear-off spots, with different shear-off torque, a hexagon head and socket. 2. The tear-off torques are defined in such as way that generally the biggest conductor cross-section is clamped with the biggest clamping torque and the smaller conductor cross-section with the smaller clamping torque. This happens by allocating hexagon head and socket. 3. Assembly is much simpler than with the telescopic screw, because each screw needs to be pulled and torn off only once.
Screw connectors are a reliable and economic way of connecting identical or different conductor cross-sections. They can be used up to 36kV. All lugs and connectors are fitted with torque-limited shear-off screws. The actual cross-section of the cable does not need to be known, because each screw lug or connector covers many cable sizes. This results in simplified logistics, a small stock of lugs will cover a wide range of applications. Also, the tin-plated surface means that they can be used on both copper and aluminium cables. The principle of multiple tear-off screws The screws of the Haupa screw lugs and connectors have a hexagon head and socket, which clamps the conductor cross-section with optimal clamping torque and therefore reduces assembly time. As the screw is tightened it will shear off when correct torque is reached and a good joint is made.
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
107
Assortments Tubular cable lugs assortment standard
Assortment of tubular terminals, standard
Content: 380 crimping terminals, crimping pliers (art. 210805), crimp standard 6 - 50 mm², hexagon crimping, in plastic bulk storage chest 420 x 350 x 60 mm. 50 crimping terminal, 6, M6, art. 290934 50 crimping terminal, 6, M8, art. 290936 50 crimping terminal, 10, M6, art. 290940 50 crimping terminal, 10, M8, art. 290942 30 crimping terminal, 16, M8, art. 290952 40 crimping terminal, 16, M10, art. 290954 25 crimping terminal, 25, M8, art. 290960 25 crimping terminal, 25, M10, art. 290962 20 crimping terminal, 35, M8, art. 290968 20 crimping terminal, 35, M10, art. 290970 20 crimping terminal, 50, M8, art. 290978
Content: 1.200 crimping terminals, crimping pliers (art. 210830), crimp DIN 0,75-16 mm², mandrel shape crimping, in plastic bulk storage chest 420 x 350 x 60 mm: 100 crimping terminal, 4, M5, art. 290924 100 crimping terminal, 4, M6, art. 290926 100 crimping terminal, 6, M6, art. 290934 100 crimping terminal, 10, M8, art. 290942 100 crimping terminal, 10, M10, art. 290944 50 crimping terminal, 16, M8, art. 290952 50 crimping terminal, 16, M10, art. 290954 100 crimping terminal, 2,5, M6, art. 290918 100 crimping terminal, 2,5, M5, art. 290916 100 crimping terminal, 1,5, M5, art. 290908 100 crimping terminal, 1,5, M4, art. 290906 100 crimping terminal, 0,75, M4, art. 290902 100 crimping terminal, 0,75, M3, art. 290900
Art. no. 290380
Art. no. 290381
Content type 380 standard
kg 6
PU 1
Tubular cable lugs assortment DIN 46235
108
kg/100 I TL CSS
Content 380
type DIN
Weight in kg/100 Length Total length Conductor cross section
Identification number Flange width Flange length Flange length1
PU 1
Content: 1.400 crimping terminals, crimping pliers (art. 210774), crimp DIN 1,0-16 mm², mandrel shape crimping, in plastic bulk storage chest 420 x 350 x 60 mm. 100 insulated ring terminals DIN, 16, M10, art. 290670 100 insulated ring terminals DIN, 16, M8, art. 290668 100 insulated ring terminals DIN, 16, M6, art. 290666 100 insulated ring terminals DIN, 10, M10, art. 290662 100 insulated ring terminals DIN, 10, M8, art. 290660 100 insulated ring terminals DIN, 10, M6, art. 290658 100 insulated crimp terminals type ring 2,5-6, M8, art. 290642 100 insulated ring terminals DIN, 6, M6, art. 290648 100 insulated crimp terminals type ring, 2,5-6, M5, art. 290638 100 insulated crimp terminals type ring, 1,5-2,5, M6, art. 290632 100 insulated crimp terminals type ring, 1,5-2,5, M5, art. 290630 100 insulated crimp terminals type ring, 1,5-2,5, M4, 290628 100 insulated crimp terminals type ring, 0,25-1,5, M5, 290624 100 insulated crimp terminals type ring, 0,25-1,5, M4, 290622
kg 6,600
IN B c c1
kg 6
Assortment of ring terminals, uninsulated
Content: 380 crimping terminals crimping pliers (art. 210805K), crimp DIN 6 - 50 mm², hexagon crimping, in plastic bulk storage chest 420 x 350 x 60 mm. 50 Crimping terminal DIN 46235, 6, M6, art. 290404 50 Crimping terminal DIN 46235, 6, M8, art. 290406 50 Crimping terminal DIN 46235, 10, M6, art. 290410 50 Crimping terminal DIN 46235, 10, M8, art. 290412 30 Crimping terminal DIN 46235, 16, M8, art. 290418 40 Crimping terminal DIN 46235, 16, M10, art. 290420 25 Crimping terminal DIN 46235, 25, M8, art. 290426 25 Crimping terminal DIN 46235, 25, M10, art. 290428 20 Crimping terminal DIN 46235, 35, M8, art. 290434 20 Crimping terminal DIN 46235, 35, M10, art. 290436 20 Crimping terminal DIN 46235, 50, M8, art. 290440
Art. no. 290382
Content 1200
c2 A M plug
PU 1
Art. no. 290386
Flange length2 Sleeve length Thread metric Connector gauge
Content 1400
d1 d4 d2 E
kg 6
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
PU 1
Assortment of ring terminals, uninsulated
Assortment of ring terminals, uninsulated
Content: 900 crimping terminals, crimping pliers (art. 210764), crimp DIN 1,0-10 mm², mandrel shape crimping, in plastic bulk storage chest 420 x 350 x 60 mm. 100 insulated crimp terminals type ring, 0,25-1,5, M4, art. 290622 100 insulated crimp terminals type ring, 0,25-1,5, M5, art. 290624 100 insulated crimp terminals type ring, 1,5-2,5, M4, art. 290628 100 insulated crimp terminals type ring, 1,5-2,5, M5, art. 290630 100 insulated crimp terminals type ring, 1,5-2,5, M6, art. 290632 100 insulated crimp terminals type ring, 2,5-6, M5, art. 290638 100 insulated ring terminals DIN, 6, M6, art. 290648 100 insulated ring terminals DIN, 10, M6, art. 290658 100 insulated ring terminals DIN, 10, M8, art. 290660
Art. no. 290387
Content 900
kg 6
Content: 1.400 crimping terminals, crimping pliers (art. no. 210830), crimp DIN 0,75-16 mm², mandrel shape crimping, in plastic bulk storage chest 420 x 350 x 60 mm. 100 insulated ring terminals DIN, 16, M10, art. 290670 100 insulated ring terminals DIN, 16, M8, art. 290668 100 insulated ring terminals DIN, 16, M6, art. 290666 100 insulated ring terminals DIN, 10, M10, art. 290662 100 insulated ring terminals DIN, 10, M8, art. 290660 100 insulated ring terminals DIN, 10, M6, art. 290658 100 insulated crimp terminals type ring, 2,5-6 M8, art. 290642 100 insulated ring terminals DIN, 46234 6, M6, art. 290648 100 insulated crimp terminals type ring, 2,5-6, M5, art. 290638 100 insulated crimp terminals type ring, 1,5-2,5, M6, art. 290632 100 insulated crimp terminals type ring, 1,5-2,5, M5, art. 290630 100 insulated crimp terminals type ring, 1,5-2,5, M4, art. 290628 100 insulated crimp terminals type ring, 0,25-1,5, M5, art. 290624 100 insulated crimp terminals type ring 0,25-1,5 M4, art. 290622
PU 1 Art. no. 290385
Assortment of tubular terminals, light
Content 1400
kg 6
PU 1
Content: 1.100 crimping terminals crimping pliers (art. 210830), crimp DIN 0,75-16 mm², mandrel shape crimping, in plastic bulk storage chest 420 x 350 x 60 mm. 100 Tube terminals, light, 10, M10, art. 294040 100 Tube terminals, light, 16, M8, art. 294048 100 Tube terminals, light, 10, M6, art. 294036 100 Tube terminals, light, 6, M5, art. 294024 100 Tube terminals, light, 6, M6, art. 294026 100 Tube terminals, light, 16, M10, art. 294050 100 Tube terminals, light, 2,5, M4, art. 294006 100 Tube terminals, light, 1,5, M4, art. 294000 100 Tube terminals, light, 2,5, M6, art. 294010 100 Tube terminals, light, 1,5, M5, art. 294002 100 Tube terminals, light, 2,5, M5, art. 294008
Art. no. 294240
Content 380
kg 6
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
109
End sleeves of electrolytic copper
Crimping tools
Tubular cable lugs
Criming pliers CSS/L 0,25/5 0,25/6 0,34/5 0,34/6 0,5/6 0,5/8 0,75/6 0,75/8 0,75/10 0,75/12 1,0/6 1,0/8 1,0/10 1,0/12 1,5/7 1,5/8 1,5/10 1,5/12 1,5/18 1,5/20 2,5/7 2,5/8 2,5/10 2,5/12 2,5/13 2,5/15 2,5/18 2,5/20 4,0/9 4,0/10 4,0/12 4,0/14 4,0/15 4,0/18 6,0/10 6,0/12 6,0/14 6,0/15 6,0/18 6,0/20 10,0/12 10,0/14 10,0/15 10,0/18 16,0/12 16,0/15 16,0/16 16,0/18 16,0/24 25,0/12 25,0/15 25,0/16 25,0/18 25,0/22 25,0/25 35,0/16 35,0/18 35,0/20 35,0/22 35,0/25 35,0/26 35,0/30 50,0/20 50,0/22 50,0/25 70,0/21 70,0/25 95,0/30 120,0/32 150,0/38 185,0/40
DIN
colour
I
colour
II
colour
270014
270714
270016
270716
TWIN colour
270800
270800
270719
270778
270803
270021
270721
270780 270782
270804
270804
270723
NSFGAFÖU colour
270784 270787
270806 270808
270808
270725
270788
270900 270902
270790 270028
270810 270812
270727
270029
270810
bare
tin-plated 270066
270141
270068
270140
270070
270142
270072
270143 270144 270146
270074 270076
270148 270149 270150
270078 270079 270080
270152 270154 270156 270158
270082 270084 270086 270087 270088
270159 270160
270089 270090
270906
270164
270091 270092 270093 270094
270166
270096
270168 270170 270172
270097 270098 270100 270102
270794 270031
270814
270813
270033
270814
270036
270816
270818
270038
270738
270910
270820
270040
270822
270174 270176
270740
270042
270742
270912
270178
270104 270106 270107 270108
270180 270182 270184 270186
270110 270112 270114 270116
270188
270118 270119 270120 270121
270798 270824 270826
270044 270046
270744 270746
270828
270048
270748
270914
Art. no. 210804
mm2 0,08 - 10,0
Criming pliers
Art. no. 210761
mm2 0,5 - 6,0
Criming pliers
Art. no. 210764
mm2 1,5 - 10
Criming pliers
Art. no. 210799 210830
mm2 0,5 - 16 0,75 - 16
DIN 96234 standard
Criming pliers
270799
270190 270830 270832 270834
270049 270050
270750 270192
270122
Art. no. 210788 210789
mm2 10 - 50 50 - 95
Criming pliers
270123 270836 270838
270754
270840
270756
270194 270195 270196
270124 270126 270128
270198 270130 270842
270758 270131
270844
270760 270762 270132 270134 270135 270136 270137
Fork terminals DIN 46237
Socket sleeves DIN 46231
Butt connectors
CSS Art. no. 0,5 - 1,0 260250 260252 260254 260256 260258 260260 260262 260264 1,5 - 2,5 260267 260268 260270 260272 260274 260276 260278 4,0 - 6,0 260282 260284 260286 260288 260290 260292
CSS Art. no. 0,5 - 1,0 260300 260302 260304 260306 260308 1,5 - 2,5 260310 260312 260314 260316 260318 4,0 - 6,0 260320 260322 260324 260326 260328
CSS Art. no. 0,5 - 1,0 260330 260331 1,5 - 2,5 260332 260333 4,0 - 6,0 260334 260335
CSS 0,5 - 1,0 1,5 - 2,5 4,0 - 6,0
M 2,5 3 3,5 4 5 6 8 10 3 3,5 4 5 6 8 10 3,5 4 5 6 8 10
B 2,6 3,2 3,6 4,2 5,2 6,2 8,3 10,4 3,2 3,7 4,2 5,2 6,2 8,2 10,5 3,7 4,2 5,2 6,2 8,2 10,5
* * * * * * * * * * * * * * * * * * * *
Parallel connectors
Art. no. 260360 260362 260364
Socket sleeves
M 3 3,5 4 5 6 3 3,5 4 5 6 4 5 6 8 10
B 5,6 6,5 6,4 8 9,2 5,6 6,6 6,6 9,1 10 8,1 9 11 15,2 19
* * * * * * * * * * * * * * *
Rapid connectors
B 2,8 3 2,8 2,8 2,8 4,5
Round sleeves CSS Art. no. 0,5 - 1,0 260440 1,5 - 2,5 260442 260443 2,5 - 6,0 260444
3
4
5
Socket sleeves fully-insulated
plug 2,8 x 0,5 2,8 x 0,8 4,8 x 0,5 4,8 x 0,8 5,2 x 0,8 6,3 x 0,8 * 4,8 x 0,5 4,8 x 0,8 5,2 x 0,8 6,3 x 0,8 * 6,3 x 0,8 * 9,8 x 1,1
Socket sleeves with branch Art. no. 260410 260412 260411
plug 6,3x0,8 6,3x0,8 6,3x0,8
CSS Art. no. 0,5 - 1,0 260415 260414 1,5 - 2,5 260417 260416 4,0 - 6,0 260418
plug 4,8 x 0,8 6,3 x 0,8 * 4,8 x 0,8 6,3 x 0,8 * 6,3 x 0,8 *
Flat terminals
CSS Art. no. 0,5 - 1,0 260510 260512 260514 260516 260422 1,5 - 2,5 260518 260520 260424 4,0 - 6,0 260426
plug 2,8 x 0,5 2,8 x 0,8 4,8 x 0,5 4,8 x 0,8 6,3 x 0,8 * 4,8 x 0,5 4,8 x 0,8 6,3 x 0,8 * 6,3 x 0,8 *
mm2 10 - 300
kN 60
Hydraulic hand pliers HO-6 300-O6
mm2 6 - 300
kN 60
Battery powered crimping tool S0-6 300-O6
Round terminals
Art. no. 216801
mm2 6 - 300
kN 60
B 4 5 4 5
Nylon ring type CSS Art. no. 0,5 - 1,0 260370 260371 1,5 - 2,5 260372 260373 2,5 - 6,0 260374 10 260376
B 1,8 1,8 1,8 1,8 2,6 4
Shrinkable connectors
* * * * *
CSS 10
16
25
Polyolefininsulated CSS Art. no. 0,5 - 1,0 260380 260382 260384 260386 260400 260392 1,5 - 2,5 260388 260390 260402 260394 4,0 - 6,0 260396 260404
300-O6
Solderless terminals
6
B 1 4 2 5 3 6
Standard DIN Standard DIN
Hydraulic hand pliers M0-6
Art. no. 216802
Art. no. 260350 260352 260354
CSS Art. no. 0,5 - 1,0 260446 1,5 - 2,5 260448 260449 4,0 - 6,0 260450
B 4 5 4 5
2
CSS Art. no. 0,5 - 1,0 260336 260500 1,5 - 2,5 260337 260502 4,0 - 6,0 260338 260504
mm2 6 - 50 6 - 50 10 - 120 10 - 120
Battery powered crimping tool AD400-6
Round pins 1
Art. no. 210805 210805K 210850 210853
Art. no. 216804
Ring terminals DIN 46237
CSS 0,5 - 1,0 1,5 - 2,5 4,0 - 6,0
Criming pliers
270797
Crimp terminals, PVC-insulated
CSS 0,5 - 1,0 1,5 - 2,5 4,0 - 6,0
mm2 0,5 - 4 1 - 10 6 - 16 10 - 25 10 - 35 25 - 50
270908 270796
270816
Art. no. 210763 210842 210765 211672 210768 211674
270904 270792
270813
Tubular terminal lugs standard
CSS 0,5 - 1,0 1,5 - 2,5 4,0 - 6,0
Art. no. 363500 363502 363504
35
50
Solderless terminals insulatet Nylon fork type CSS Art. no. 10 260858 260860 16 260862 260863
*
70 M 5 6 5 8
95
certified 120
150
Art. no. 216664
Art. no. 260902 260904 260906 260908 260910 260912 260914 260916 260918 260920 260922 260924 260926 260928 260930 260932 260934 260936 260938 260940 260942 260944 260946 260948 260950 260952 260954 260956 290958 260960 260962 260964 260966 260968 260970 260972 260974 260976 260978 260980 260982 260984
M 5 6 8 10 12 5 6 8 10 12 5 6 8 10 12 16 6 8 10 12 16 6 8 10 12 16 6 8 10 12 16 8 10 12 16 8 10 12 16 10 12 16
mm 25 - 400
2
kN 60
Battery powered crimping tool AC25-12 400-C12
Art. no. 216601
mm2 10 - 400
kN 120
Battery powered crimping tool AC42-12 400-C12
CSS/M 0,75/3 0,75/4 1,5/3 1,5/4 1,5/5 1,5/6 2,5/3 2,5/4 2,5/5 2,5/6 2,5/8 4/4 4/5 4/6 4/8 6/4 6/5 6/6 6/8 10/5 10/6 10/8 10/10 10/12 16/5 16/6 16/8 16/10 16/12 25/6 25/8 25/10 25/12 35/6 35/8 35/10 35/12 35/16 50/6 50/8 50/10 50/12 50/16 70/6 70/8 70/10 70/12 70/14 70/16 95/8 95/10 95/12 95/14 95/16 95/20 120/8 120/10 120/12 120/14 120/16 120/20 150/10 150/12 150/14 150/16 150/20 185/10 185/12 185/14 185/16 185/20 240/12 240/14 240/16 240/20 300/12 300/14 300/16 300/20 400/12 400/16 400/20 500/12 500/16 500/20 625/16 625/20 800/20 1000/20
90° standard
F-Type cable class 5/6
290900 290902 290904 290906 290908 290910 290912 290914 290916 290918 290920 290922 290924 290926 290928 290930 290932 290934 290936 290938 290940 290942 290944 290946 290948 290950 290952 290954 290956 290958 290960 290962 290964 290966 290968 290970 290972 290974 290976 290978 290980 290982 290984 290985 290986 290988 290990 290991 290992 290994 290996 290998 290999 291000 291002 290004 290006 290008 290009 290010 290012 290014 290016 290017 290018 290020
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
290930/90 290932/90 290934/90 290936/90 290938/90 290940/90 290942/90 290944/90 290946/90 290948/90 290950/90 290952/90 290954/90 290956/90 290958/90 290960/90 290962/90 290964/90 290966/90 290968/90 290970/90 290972/90 290974/90 290976/90 290978/90 290980/90 290982/90 290984/90 290985/90 290986/90 290988/90 290990/90 290991/90 290992/90 290994/90 290996/90 290998/90 290999/90 291000/90 291002/90 290004/90 290006/90 290008/90 290009/90 290010/90 290012/90 290014/90 290016/90 290017/90 290018/90 290020/90
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
290022 290023 290024 290026 290028 290029 290030
* * * * * * *
290022/90 290023/90 290024/90 290026/90 290028/90 290029/90 290030/90
* * * * * * *
290034 290036 290038 290040
* * * *
Crimp cable lugs DIN 46235
290404 290406 290408 290410 290412 290414
290250 290252 290254 290256 290258 290260 290262 290264 290266 290268 290270 290272
kN 120
290276 290278 290280
290282 290284 290286 290288
290440 290442 290444 290446
291732 291734 291736 291738
290290 290292 290294
290448 290450 290452
291740 291742 291744
290296
290454
291746
290300 290302
290456 290458
290304
Hydraulic crimping headstock KH-45 1000-H450
Art. no. 216355
mm2 120 - 1000
kN 450
www.haupa.com
291726 291728 291730
292908 292910
293300 293302 293304
292912 292914
292770 292772
293306 293308
292916 292918
292774 292776
293310 293312
292920 292922
292778 292780
293314 293316
291748 291750
292924 292926
292782 292784
290460
291752
292928
290306 290308
290462 290464
291754 291756
292930
292786
293322
290310
290466 290468 290470 290472
291758 291760 291762 291764
292932
292788
293324
292934
292790 292792
293326
291766 291768 291770 291772
292936 292938
292794
293328
290322
290474 290476 290478 290480
292796 292798
293330
290324 290326 290328
290482 290484 290486
291774 291776 291778
292942 292944 292946
290330 290332 290334
290488 290490
291780 291782
292948 292950
290336 290338
290492 290494
290316 290318 290320
290041 290043 290045 290047
293318 293320
292940
292800
293332
292802
293334
292804 292806 292808
293336
292810 292812 292814 292816 292818 292820 292822 292824
290516 290518 290520 290522
Connectors Connectors cable class 5/6
Terminals Connectors DIN 46267
Connectors AL DIN 46267
Crimp ring terminals DIN 46234 CSS 0,5 - 1
291521 290350 290352 290354 290356 290358 290360 290362 290364 290366 290368 290370 290372 290374 291549 291551 291553 291555
291523 291525 291527 291529 291531 291533 291535 291537 291539 291541 291543 291545 291547
293542 293544 293546 293548 293550 293552 293554 293556 293558
AL-Screw connectors
Tin-plated CSS Art. no. 16 - 95 293140 50 - 150 293142 293144 95 - 240 293146 293148 120 - 300 293150 293152 185 - 400 293154 293156
rm/sm AL/Cu Crimp cable lugs
292904 292906
290496 290498
AL-Screw terminals mm2 10 - 400
rm/sm Crimp cable lugs AL DIN 46329
291704 291706 291708
291710 291712 291714 291716 291718 291720 291722 291724
Screw terminals 10-30 KV Art. no. 216622
rm/sm Crimp cable lugs AL DIN
291700 291702
290416 290418 290420 290422 290424 290426 290428 290430 290432 290434 290436 290438
290046 290048
CSS/M Butt connectors standard 0,75 291050 * 1,5 291052 * 2,5 291054 * 4 291056 * 6 291058 * 10 291060 16 291062 25 291064 * 35 291066 * 50 291068 * 70 291070 * 95 291072 * 120 291074 * 150 291076 * 185 291078 * 240 291080 * 300 291082 * 400 291084 500 625 800 1000
90° DIN
Tin-plated M Schrauben 12 1 12 1 16 1 12 2 16 2 12 2 16 2 12 3 16 3
CSS 16 - 95 50 - 150 95 - 240 120 - 300 185 - 400
Art. no. 293130 293132 293134 293136 293138
Schrauben
2 2 4 4 6
Art. no. 290619 290620 290621 290622 290624 290623 290625 290617 1,5 - 2,5 290626 290627 290628 290630 290632 290634 290635 4,0 - 6 290637 290636 290646 290648 290650 290652 290654 10 290656 290658 290660 290662 290663 16 290664 290666 290668 290670 290672
M 2,5 3 3,5 4 5 6 8 10 3 3,5 4 5 6 8 10 3,5 4 5 6 8 10 12 5 6 8 10 12 5 6 8 10 12
CSS 25
35
* * * * * * *
50
70
95
120
150
185
Art. no. 290676 290678 290680 290682 290684 290686 290688 290690 290692 290694 290696 290698 290700 290701 290702 290704 290707 290708 290710 290712 290713 290714 290716 290717 290719 290721 290718 290720
M 6 8 10 12 16 8 10 12 16 8 10 12 16 8 10 12 8 10 12 16 10 12 16 20 10 12 16 16
Around the cable
Cable ties, accessories Nailing clips
... convincing solutions
Cable ties
INFO Cable ties
Product line cable ties HAUPA cable ties are characterised by their tightness, high tensile strength of the loop and extreme flexibility of the cord. As a result of these characteristics, HAUPA cable ties are able to cope with even the most extreme installation practices, which conventional cable ties would not be able to cope with. All HAUPA cable ties conform to WEEE/RoHS guidelines. The cable ties product range includes: • cable ties colour: natural/black
All HAUPA cable ties are made from plastic and are recyclable. The internal toothing of the ties gives you the necessary strength to tie the material. The cable ties can be simply used by hand or with a HAUPA cable tie tool. The slightly bent end allows the tie to be inserted into the head easily. Use: For bundling and fastening cables, wires and tubes. NH (non-halogen) – RoHS conform
Cable ties material: nylon, colour natural, quick and simple to fix by hand or with tensioning tools, extremely resistant to sea water, oil, grease, etc., manufactured in accordance with UL and MIL specification requirements, - 40° C bis 85° C, UL E 341152
• cable ties colour: black (UV-resistant) • releasable ties colour: black • double-locking cable ties colour: black • cable ties with fixing eye colour: natural • cable ties with label colour: natural • hook and loop ties colour: black, green Accessories: • adhesive base, screw base, plug mount base
Ideal storage conditions for cable ties made from nylon Cable ties are made from high-quality nylon. This technical plastic is usually processed through injection moulding, but it can also be extruded. Nylon is a hygroscopic plastic that absorbs water and can release it. In order to process the ties optimally, it is important that the material is in a balanced state with a water content of approx. 2.5%. The original HAUPA cable tie packaging provides constant water content in the material.
Art. no. 262500 262502 262504 262506 262508 262510 262512 262516 262518 262520 262522 262528 262530 262532 262536 262538 262540 262542 262546
TL 96 100 142 203 142 292 190 203 250 310 368 203 280 380 450 610 812 914 550
width 2,5 2,5 2,5 2,5 3,2 3,6 4,8 4,6 4,8 4,8 4,8 7,6 7,6 7,6 8,0 9,0 9,0 9,0 12,7
23 25 35 55 35 85 52 55 74 89 102 55 78 110 133 185 246 270 166
8 8 8 8 18 18 22 22 22 22 22 55 55 55 80 80 80 80 114
kg/100 0,028 0,030 0,044 0,065 0,083 0,155 0,143 0,145 0,203 0,220 0,274 0,300 0,400 0,540 0,760 1,270 1,600 0,860 1,770
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 20 50 50
PE 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
25.000 25.000 13.000 10.000 7.000 8.000 7.000 6.000 5.000 4.000 2.000 2.000 2.500 500 500 500 500 500
Cable ties The cable ties should be stored as follows:
material: nylon - colour black, all other data and properties like No. 26 25 00 46, weather- and UV-resistant, UL E 341152
Storage in a closed plastic bag made from polyethylene
No direct sunlight
Storage without direct exposure to heat (radiator etc.)
23°C
112
kg/100 I TL CSS
Ideal storage temperature (standard Central European climatic conditions) up to 23° with 50% humidity
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Art. no. 262600 262602 262604 262606 262608 262610 262616 262618 262620 262622 262628 262630 262632 262636 262638 262640 262642 262646
Flange length2 Sleeve length Thread metric Connector gauge
TL 96 100 142 203 142 292 203 250 310 368 203 280 380 450 610 812 914 550
d1 d4 d2 E
width 2,5 2,5 2,5 2,5 3,2 3,6 4,6 4,8 4,8 4,8 7,6 7,6 7,6 8,0 9,0 9,0 9,0 12,7
8 8 8 8 18 18 22 22 22 22 55 55 55 80 80 80 80 114
kg/100 0,040 0,040 0,040 0,080 0,080 0,160 0,150 0,200 0,240 0,270 0,300 0,400 0,540 0,880 1,280 1,600 0,880 1,600
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
23 25 35 55 35 85 52 74 89 102 55 78 110 133 185 246 270 166
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 20 50 50
PE 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
25.000 20.000 10.000 10.000 7.000 6.000 6.000 5.000 4.000 2.000 2.000 2.500 500 500 500 500 500
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Cable ties Cable ties
Cable ties
material: polyamide 6,6 - colour natural, resistant to milden and rotting, extremely resistant to sea water, oil, grease, hydrocarbons and hydraulic fluids, operating temperature: -40° to +85° C, these binders meet the requirements of the military specification Mil.-Spec. 23 190C (WEP) MS-3367, UL 94 V2, UL E 341152
material: nylon - colour natural, all other data and properties like No. 262500 46, big packing unit 1000 pcs., UL E 341152
Art. no. 262100 262101 262102 262106 262108 262110 262114 262116
TL 100 203 142 203 310 368 380 550
width 2,5 3,6 3,2 4,6 4,8 4,8 7,6 12,7
23 55 35 55 89 102 110 166
8 18 18 22 22 22 55 114
kg/100 0,031 0,131 0,074 0,150 0,228 0,227 0,560 1,600
PU 100 100 100 100 100 100 50 50
PE 100 100 100 100 100 100 100 100
25.000 10.000 10.000 7.000 5.000 4.000 2.000 500
Art. no. 262501 262503 262505 262507 262509 262511 262513 262517
TL 96 100 142 203 142 292 190 203
width 2,5 2,5 2,5 2,5 3,2 3,6 4,8 4,6
23 25 35 55 35 85 52 55
8 8 8 8 18 18 22 22
kg/100 0,028 0,026 0,031 0,065 0,070 0,158 0,140 0,140
PU 1000 1000 1000 1000 1000 1000 1000 1000
PE 100 100 100 100 100 100 100 100
Releasable cable ties for temporary wiring and sub-assembly, material: polyamide 6,6 - colour black, operation temperature: -40° to +85° C, UL E 341152
Cable ties Art. no. 262140 262142 262144
material: polyamide 6,6 - colour black, all other data and properties like No. 26 21 00 - 16, resistant to sea water, oil, grease, etc., not UV-resistant, UL E 341152
TL 150 200 300
width 7,6 7,6 7,6
35 50 80
22 22 22
kg/100 0,201 0,249 0,349
PU 100 100 100
PE 100 100 100
kg/100 0,319 0,512 0,629 0,463
PU 100 100 100 100
PE 100 100 100 100
Double-locking-cable ties material: nylon - colour black, (26 27 10 Nylon 12) Art. no. 262120 262122 262124 262126 262128 262130 262132 262134 262136
TL 100 142 203 203 310 368 280 380 550
width 2,5 3,2 3,6 4,6 4,8 4,8 7,6 7,6 12,7
25 35 55 55 89 102 78 110 166
8 18 18 22 22 22 55 55 114
kg/100 0,003 0,065 0,116 0,145 0,248 0,269 0,397 0,580 1,600
PU 100 100 100 100 100 100 100 50 50
PE 100 100 100 100 100 100 100 100 100
25.000 10.000 10.000 6.000 5.000 4.000 2.000 2.000 500
Art. no. 262700 262702 262704 262710
TL 180 300 360 300
width 9,0 9,0 9,0 9,0
45 88 100 88
55 55 55 55
Cable ties “UVplus” Long-term weather resistant, for industrial uses, black, UV resistant, material polyamide, 7 year guarantee
Art. no. 262950 262952 262954 262956 262958 262960 262962 262964 262966 262968 262970 262972 262974 262976 262978 262980
TL 100 202 150 201 290 199 250 290 371 290 370 542 523 709 774 920
width 2,5 2,5 3,3 3,6 3,6 4,8 4,8 4,8 4,8 7,6 7,6 7,6 8,8 8,8 8,8 8,8
25 50 38 57 82 56 72 83 129 82 108 162 156 213 233 279
8 8 18 18 18 22 22 22 22 54 54 54 79 79 79 79
kg/100 0,030 0,070 0,070 0,150 0,160 0,150 0,200 0,220 0,270 0,410 0,550 0,750 1,000 1,000 1,000 1,000
PU 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50
PE 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
113
Cable ties, accessories Cable ties with fixing eye
Screw type sockets
material: nylon, colour natural, quick and simple to fix by hand or with tensioning tools, extremely resistant to sea water, oil, grease, etc., manufactured in accordance with UL and MIL specification requirements, - 40° C bis 85° C
for cable ties and a quick and reliable fastening of large diam. Cable bundles and other objects, not UV-resistant
Art. no. 262820 262822 262824 262826 262828 262830 262832 262834
TL 100 170 170 205 300 300 370 398
width 2,5 3,7 3,7 4,2 4,8 7,8 4,8 7,9
Ø 3,0 4,8 4,0 4,6 4,8 6,0 4,9 6,1
25 40 40 60 85 80 102 122
kg/100 0,044 0,100 0,105 0,133 0,224 0,443 0,276 0,595
8 18 18 22 22 55 22 55
PU 100 100 100 100 100 100 100 100
PE 100 100 100 100 100 100 100 100
Art. no. 262164 262165
TL 1,5 natural 1,5 black
7,8 7,8
width 1 1
TL 1,5 1,5
kg/100 0,121 0,136
PU 100 100
PE 100 100
Dowel Mounting sockets/Christmas trees for cable ties up to a width of 9 mm, 2 types with different wall-distances, available wall-fixing avoid the friction of the cable on the wall, black colour
Cable ties with marking space These cable ties are suitable for simple labelling and simultaneous bundling ofcable loops. This saves one work step. Material: nylon, colour natural, can be fastened quickly and easily using a tool or by hand. Extremely resistant to sea water, oil, fats etc, manufactured according to UL gema tested nylon. Technical data: material polyamide 6.6 (N66), operating temperature -40 to +85 C. Group features: HF (non-halogen), RoHS-conform
Art. no. 262170 262172
TL 37 37
width 10 10
9 9
1 2
Ckg/100 D 6,5 0,201 9,2 6,5 0,280 9,2
PU 100 100
PE 100 100
Hook-and-loop cable ties Art. no. 262840 262842 262844 262846 262848 262850
1 4 2 3 1 3
TL 100 130 110 200 200 270
width 2,5 2,5 2,5 4,6 2,5 4,6
label 25 x 8 28 x 20 25 x 8 28 x 13 30 x 15 28 x 13
25 25 25 50 50 75
8 8 8 22 8 22
kg/100 0,049 0,093 0,058 0,147 0,128 0,198
PU 100 100 100 100 100 100
PE 100 100 100 100 100 100
pieces
Self adhesive sockets for cable ties and a quick and reliable fastening of line or cable bundles and other objects
Art. no. 262160 262161 262162 262163
TL 19 natural 19 black 28 natural 28 black
made from extruded polyamide-velour laminate, thickness approx. 1.4 mm, selfadhesive back to back, suitable for approx. 200 uses. Colours: black and green Hook-and-loop cable ties with loop, cut to binder measurements for all standard electrical installations
3,6 3,6 4,8 4,8
width 19 19 28 28
kg/100 0,078 0,075 0,178 0,190
PU 100 100 100 100
PE 100 100 100 100
Art. no. 262750 262752 262754 262756 262758 262760 262762 262764 262766 262768
TL 125 135 180 210 310 125 135 180 210 310
black black black black black green green green green green
TL 10000
width 20
width 12 12 12 16 16 12 12 12 16 16
kg/100 0,220 0,240 0,300 0,420 0,560 0,220 0,230 0,300 0,430 0,610
PU 20 20 20 20 20 20 20 20 20 20
PE 100 100 100 100 100 100 100 100 100 100
kg/100 10,000
PU 1
PE 1
coil Art. no. 262782
114
kg/100 I TL CSS
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Cable ties, accessories
Steel cable ties, accessories
Tensioning tools for cable ties Prevents overstretching and constriction by continnuonsly adjustable stress limitation. The built-in knife will cut only, when the requested tension has been reached
Art. no. 262151
width 2,5-5
material plastic
kg 0,240
PU 1
Tensioning tools for cable ties Prevents overstretching and constriction by continnuonsly adjustable stress limitation. The built-in knife will cut only, when the requested tension has been reached
Art. no. 262152
width 2,5-5
material metal
kg 0,334
PU 1
Tensioning tools for cable ties Prevents overstretching and constriction by continnuonsly adjustable stress limitation. The built-in knife will cut only, when the requested tension has been reached
Art. no. 262154
width 2,5-13
material metal
kg 0,365
PU 1
Tensioning tools for cable ties Prevents overstretching and constriction by continnuonsly adjustable stress limitation. The built-in knife will cut only, when the requested tension has been reached
Art. no. 262158
width 2,5-10
material metal
kg 0,303
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
115
Steel cable ties, accessories Steel cable ties, SS SS 316 (V4A) with ball closure
Steel cable ties, SS 316 (V4A) with ball closure
made from stainless steel 316 (DIN 1.4401), corrosion and radiation resistant, non-magnetic, extremely resistant to high temperatures (steel –80 °C to +538 °C) and aggressive chemicals, steel thickness 0.3 mm. For use in machinery, vehicles, signalling, shipping and mining, in the food and chemical industries, in power plants, underground systems, on drilling platforms, wind-power generation plants and telecommunications.
with cable protection sleeve made of epoxy resin polyester, free from halogen, black made from stainless steel 316 (DIN 1.4401), corrosion and radiation resistant, non-magnetic, extremely resistant to high temperatures (steel –80 °C to +538 °C) and aggressive chemicals, steel thickness 0.3 mm. For use in machinery, vehicles, signalling, shipping and mining, in the food and chemical industries, in power plants, underground systems, on drilling platforms, wind-power generation plants and telecommunications.
Art. no. 262940/125 262940/152 262940/200 262940/250 262940/300 262940/360 262940/520 262950/152 262950/200 262950/300 262950/360 262950/520 262950/680 262950/840 262950/1050 262960/290 262960/360 262960/520 262960/680 262960/840 262960/1000 262960/1200
Art. no. 262942/125 262942/152 262942/200 262942/250 262942/300 262942/360 262942/520 262952/152 262952/200 262952/300 262952/360 262952/520 262952/680 262952/840 262952/1050 262962/290 262962/360 262962/520 262962/680 262962/840 262962/1000 262962/1200
TL 125 152 200 250 300 360 520 152 200 300 360 520 680 840 1050 290 360 520 680 840 1000 1200
width 4,5 4,5 4,5 4,5 4,5 4,5 4,5 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 12,0 12,0 12,0 12,0 12,0 12,0 12,0
22 25 50 75 75 102 152 25 50 75 102 152 203 254 318 80 102 152 203 254 302 351
45 45 45 45 45 45 45 113 113 113 113 113 113 113 113 272 272 272 272 272 272 272
kg/100 0,400 0,230 0,280 0,330 0,420 0,450 0,660 0,480 0,680 0,750 0,920 1,280 1,550 1,840 2,560 1,500 1,700 2,800 3,300 4,500 5,000 5,500
PU 100 100 100 100 100 100 25 100 100 100 100 25 25 25 25 100 100 25 25 25 25 25
PE 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
width 4,5 4,5 4,5 4,5 4,5 4,5 4,5 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0 12,0 12,0 12,0 12,0 12,0 12,0 12,0
22 25 50 60 75 102 152 25 50 75 102 152 203 254 318 80 102 152 203 254 302 351
45 45 45 45 45 45 45 113 113 113 113 113 113 113 113 272 272 272 272 272 272 272
kg/100 0,190 0,230 0,280 0,330 0,420 0,450 0,660 0,480 0,680 0,750 0,920 1,280 1,550 1,840 2,560 1,500 1,700 2,800 3,300 4,500 5,000 5,500
PU 100 100 100 100 100 100 25 100 100 100 100 25 25 25 25 100 100 25 25 25 25 25
Steel cable ties, 316 (V4A) with ratchet function
Tensioning tools for steel cable ties
made from stainless steel 316 (DIN 1.4401), corrosion and radiation resistant, non-magnetic, extremely resistant to high temperatures (steel –80 °C to +538 °C) and aggressive chemicals, steel thickness 0.3 mm; installation without additional tools. For use in machinery, vehicles, signalling, shipping and mining, in the food and chemical industries, in power plants, underground systems, on drilling platforms, wind-power generation plants and telecommunications.
Prevents overstretching and constriction by continnuonsly adjustable stress limitation. The built-in knife will cut only, when the requested tension has been reached
Art. no. 262159
Art. no. 262970/1100 262970/1315
116
TL 125 152 200 250 300 360 520 152 200 300 360 520 680 840 1050 290 360 520 680 840 1000 1200
kg/100 I TL CSS
TL 1100 1315
width 10,0 10,0
Weight in kg/100 Length Total length Conductor cross section
330 380
IN B c c1
kg/100 5,500 6,000
Identification number Flange width Flange length Flange length1
PU 10 10
c2 A M plug
material metal
PE 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
kg 0,560
PE 100 100
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
PU 1
Nailing clips
INFO Nailing clips Nailing clips for round cable for attaching and fixing electrical cables, optimum claw shape for secure fixing of the cable, can be fixed to the cable, version with inserted galvanised nail, material: hammer-proof polyethylene (PE), halogen-free, temperature resistant: – 40 °C to + 80 °C, and for short periods up to approximately 100 °C.
Art. no. 262200 262202 262204 262206 262208 262209 262210 262212 262214 262215 262216 262218 262220 262222 262223 262224 262226 262227 262228 262230 262232 262234 262235
colour transparent transparent pure white black transparent light-grey pure white black brown light-grey red pure white black pure white light-grey black pure white light-grey black pure white black pure white light-grey
Ø 2-3 3-5 3-5 5-7 5-7 5-7 5-7 7-10 7-10 7-10 7-10 7-10 10-14 10-14 10-14 14-20 14-20 14-20 18-22 18-22 22-26 22-26 22-26
H 4,3 5,6 5,6 8,0 8,0 8,0 8,0 9,5 9,5 9,5 9,5 9,5 13,0 13,0 13,0 17,1 17,1 17,1 19,5 19,5 21,0 21,0 21,0
H1 2,8 3,7 3,7 6,0 6,0 6,0 6,0 7,1 7,1 7,1 7,1 7,1 10,3 10,3 10,3 13,7 13,7 13,7 17,0 17,0 19,5 19,5 19,5
W 2,8 2,9 2,9 5,3 5,3 5,3 5,3 6,8 6,8 6,8 6,8 6,8 9,4 9,4 9,4 13,1 13,1 13,1 16,4 16,4 24,0 24,0 24,0
NL 19 15 15 20 20 35 20 25 25 35 25 25 35 35 44 40 40 44 38 38 38 38 44
ND 1,65 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,5 2,5 2,5 3,2 3,2 3,2 3,2 3,2
kg/100 0,032 0,038 0,038 0,100 0,100 0,100 0,102 0,093 0,092 0,092 0,093 0,092 0,166 0,162 0,162 0,136 0,138 0,138 0,402 0,396 0,464 0,458 0,458
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 100 50 50 50 50 50
Nailing clips for flat cable for attaching and fixing electrical cables, optimum claw shape for secure fixing of the cable, can be fixed to the cable, version with inserted galvanised nail, material: hammer-proof polyethylene (PE), halogen-free, temperature resistant: – 40 °C to + 80 °C, and for short periods up to approximately 100 °C.
Art. no. 262236 262238 262240 262242 262243 262244 262245 262246 262247 262248 262249
NL ND H H1 W
colour transparent transparent transparent light grey pure white light grey pure white light grey pure white light grey pure white
Ø 2-4 3-5 4-6 5-8 5-8 6-10 6-10 7-14 7-14 9-18 9-18
H 4,0 5,2 5,9 7,5 7,5 8,2 8,2 9,3 9,3 12,2 12,2
H1 2,0 3,3 3,8 4,9 4,9 5,8 5,8 6,5 6,5 9,4 9,4
W 4,0 4,6 5,8 7,9 7,9 9,8 9,8 11,8 11,8 16,7 16,7
NL 15 15 15 25 25 25 25 25 25 22 22
ND 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,0 2,5 2,5
kg/100 0,032 0,038 0,047 0,107 0,103 0,120 0,120 0,176 0,174 0,237 0,236
PU 100 100 100 100 100 100 100 100 100 100 100
= nail length = nail diameter = height = height 1 = width (opening)
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
117
Nailing clips Nailing clips for round cable for attaching and fixing electrical cables, version with inserted galvanised nail, material: hammer-proof polyethylene (PE), halogen-free, temperature resistant: – 40 °C to + 80 °C, and for short periods up to approximately 100 °C.
Art. no. 262254 262256 262258 262260 262262
colour light grey transparent light grey light grey light grey
Ø 4,1 4,1 7,0 9,0 13,2
W 4,1 4,1 7,0 9,0 13,2
NL 15 20 20 20 20
ND 2,0 2,0 2,0 2,0 2,0
kg/100 0,083 0,089 0,103 0,178 0,225
PU 100 100 100 100 100
ISO nailing clips for attaching and fixing electrical cables, can be fixed to the cable, version with inserted galvanised nail, material: hammer-proof polyethylene (PE), halogen-free, temperature resistant: – 40 °C to + 80 °C, and for short periods up to approximately 100 °C.
Art. no. 262264 262266 262268 262270 262272 262274 262276 262278 262280 262282 262284 262286 262288 262290 262292 262294 262296 262298 262300 262302 262304 262306 262308 262310
NL ND H H1 W
118
colour light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey light grey
Ø 2,75 6,0 8,0 9,0 10,0 2,75 3,5 4,0 5,0 6,0 6,0 7,0 8,0 9,0 9,5 11,0 12,0 14,0 16,0 18,0 20,0 22,0 25,0 32,0
H 4,5 9,0 12,9 12,0 13,8 4,5 5,9 6,6 7,6 9,0 10,5 11,0 12,9 12,0 13,8 16,6 16,0 20,5 21,7 22,0 23,5 27,8 30,4 40,0
H1 2,6 6,6 9,0 9,0 10,4 2,6 3,7 4,2 5,0 6,6 6,9 7,5 8,15 9,0 10,4 12,2 12,3 15,6 17,0 17,5 18,5 23,0 25,0 33,5
W 2,75 6,0 8,0 9,0 9,3 2,75 3,5 4,0 5,0 6,0 6,0 7,0 8,0 9,0 9,3 11,0 12,0 14,0 16,5 18,0 20,0 22,0 25,0 32,0
NL 20 20 25 22 25 19 15 18 18 18 20 22 22 22 25 27 27 35 38 38 38 42 47 56
ND 2,0 2,0 2,0 2,0 2,0 1,65 2,0 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 3,0 3,2 3,2 3,2 3,2 3,2 3,6
kg/100 0,083 0,100 0,131 0,132 0,145 0,047 0,060 0,091 0,100 0,106 0,119 0,128 0,136 0,138 0,156 0,234 0,223 0,345 0,472 0,457 0,254 0,321 0,433 0,306
PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 25
= nail length = nail diameter = height = height 1 = width (opening)
kg/100 I TL CSS
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Around the cable
Cable glands Heat shrinkable tubes Spiral binding Decoiler
... convincing solutions
Cable glands polyamide IP68
INFO Cable glands polyamide 6.6, IP68 Cable glands IP 68, metric or PG, assembled with washer and lock nut material: polyamide 6.6, (gland body: PA 6.6, halogen free, seal: TPR, halogen free, washer: PVC), colour: light- grey or black, temperature range: – 40°C to + 85°C, vibration protection: integrated anti- twist protection for vibration- firm assembly, fire class: according to UL 94 V–2, protection category: IP68, properties: integrated strain relief; easy to install, RoHS- compliant, completely assembled as shown
120
Art. no. 250040 250042 250044 250046 250048 250050 250052 250054 250056 250058
colour light- grey light- grey light- grey light- grey light- grey light- grey light- grey light- grey light- grey light- grey
M M12 M16 M20 M20 M20 M25 M32 M40 M50 M63
KB 3-6,5 5-10 6-12 10-14 10-14 13-18 18-25 22-32 30-38 34-44
D1 12,0 16 20,0 20,0 20,0 25,0 32,0 40,0 50,0 61,0
D2 8,3 10,9 15,0 15,0 15,0 18,6 26,0 33,7 41,9 55,0
B1 6,9 9,6 12,0 14,8 14,8 18,4 25,0 33,1 40,0 43,2
L1 7,9 15,5 10,0 10,0 15,0 15,2 14,7 18,4 17,8 18,5
L2 19,6 23,4 28,5 28,5 28,5 29,4 34,5 41,7 44,2 44,6
L3 13,6 16,9 18,5 18,5 18,5 22,3 25,7 31,3 31,3 32,7
WS 15 19 24 27 27 30 36 46 55 66
4.250 1.700 1.200 1.190 1.190 680 340 230 160 120
kg/100 0,480 1,500 1,650 1,800 1,660 2,710 4,430 7,760 10,200 11,400
PU 10 10 10 10 10 10 10 5 5 5
Art. no. 250080 250082 250084 250086 250088 250090 250092 250094 250096 250098
colour black black black black black black black black black black
M M12 M16 M20 M20 M20 M25 M32 M40 M50 M63
KB 3-6,5 5-10 6-12 10-14 10-14 13-18 18-25 22-32 30-38 34-44
D1 12,0 16 10,0 20,0 20,0 25,0 32,0 40,0 50,0 61,0
D2 8,3 10,9 15,0 15,0 15,0 18,6 26,0 33,7 41,9 55,0
B1 6,9 9,6 12,0 14,8 14,8 18,4 25,0 33,1 40,0 43,2
L1 7,9 15,5 10,0 10,0 15,0 15,2 14,7 18,4 17,8 18,5
L2 19,6 23,4 28,5 28,5 28,5 29,4 34,5 41,7 44,2 44,6
L3 13,6 16,9 18,5 18,5 18,5 22,3 25,7 31,3 31,3 32,7
WS 15 19 24 27 27 30 36 46 55 66
4.250 1.700 1.200 1.190 1.190 680 340 230 160 120
kg/100 0,600 1,000 1,300 1,620 17,000 2,690 4,560 8,100 10,100 11,400
PU 10 10 10 10 10 10 10 5 5 5
Art. no. 250060 250062 250064 250066 250068 250070 250072 250074 250076 250078
colour light- grey light- grey light- grey light- grey light- grey light- grey light- grey light- grey light- grey light- grey
M PG7 PG9 PG11 PG13,5 PG16 PG21 PG29 PG36 PG42 PG48
KB 3,5-6 4-8 5-10 6-12 10-14 13-18 18-25 22-32 30-38 34-44
D1 12,5 15,2 18,6 20,4 22,5 28,3 37,0 47,0 54,0 59,3
D2 8,3 10,5 13,2 15,5 17,2 22,4 30,6 35,3 40,0 46,2
B1 6,9 7,8 10,8 12,5 15,0 18,5 25,3 36,3 40,4 46,3
L1 7,9 7,9 7,9 8,9 9,8 10,8 10,8 7,9 14,5 15,6
L2 20,0 22,0 23,7 24,6 26,2 30,0 35,0 42,3 44,0 42,7
L3 13,3 15,1 18,3 18,9 19,5 23,7 27,4 30,3 31,2 31,3
WS 15 19 22 24 27 33 42 53 60 65
4.250 2.980 2.040 1.530 1.190 680 380 200 140 130
kg/100 0,540 0,760 1,020 1,270 1,560 2,400 4,110 8,600 11,100 12,700
PU 10 10 10 10 10 10 10 5 5 5
Art. no. 250100 250102 250104 250106 250108 250110 250112 250114 250116 250118
colour black black black black black black black black black black
M PG7 PG9 PG11 PG13,5 PG16 PG21 PG29 PG36 PG42 PG48
KB 3,5-6 4-8 5-10 6-12 10-14 13-18 18-25 22-32 30-38 34-44
D1 12,5 15,2 18,6 20,4 22,5 28,3 37,0 47,0 54,0 59,3
D2 8,3 10,5 13,2 15,5 17,2 22,4 30,6 35,3 40,0 46,2
B1 6,9 7,8 10,8 12,5 15,0 18,5 25,3 36,3 40,4 46,3
L1 7,9 7,9 7,9 8,9 9,8 10,8 10,8 7,9 14,5 15,6
L2 20,0 22,0 23,7 24,6 26,2 30,0 35,0 42,3 44,0 42,7
L3 13,3 15,1 18,3 18,9 19,5 23,7 27,4 30,3 31,2 31,3
WS 15 19 22 24 27 33 42 53 60 65
2.980 2.040 1.530 1.190 680 380 200 140 130
kg/100 0,560 7,500 1,030 1,400 1,560 2,480 4,160 8,240 10,800 11,600
PU 10 10 10 10 10 10 10 5 5 5
Identification number Flange width Flange length Flange length1
c2 A M plug
kg/100 I TL CSS
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Heat shrinkable tubes Heat shrinkable tubes
Heat shrinkable tubes
of polyolefin, radiation interlaced, self extinguished according to MV SS 302, thin and flexible, dielectric strength 15 - 25 KV/mm acc. to DIN 53481, operating temperature: - 55° C to 135° C, shrinking temperature: > 115° C, 1 m length in self-service-pack
of polyolefin, self extinguished according to MV SS 302, thin and flexible universal using, dielectric strength 15 - 25 KV/mm DIN 53481, operating temperature: - 55° C to 135° C, shrinking temperature: > 115° C, in 75 m role
Art. no. 262085 262086 262087 262088 262089 262090
Ø before 4,8 6,4 9,5 12,7 19,0 25,4
Ø after 2,4 3,2 4,8 6,4 9,5 12,7
mm 0,5 0,6 0,6 0,6 0,8 0,9
kg 0,007 0,010 0,012 0,017 0,035 0,045
PU 10 10 10 10 10 10
Heat shrinkable tubes of polyolefin, self extinguished according to MV SS 302, thin and flexible universal using, dielectric strength 15 - 25 KV/mm DIN 53481, operating temperature: - 55° C to 135° C, shrinking temperature: > 115° C, in 5 m length, in selfservice-pack
Art. no. 262095 262096
Ø before 19,0 25,4
Ø after 9,5 12,7
mm 0,8 0,9
kg 0,173 0,223
Art. no. 262093/75
Ø before 9,5
Ø after 4,8
mm 0,6
kg 1,100
PU 1
Industrial hot air blower for shrink hoses Electronic hot air blower with continuous temperature control and two blower levels, characterised by low weight and slim design. This makes it ideal for long and fatigue-free working and for use in difficult to access areas. The temperature control is continous, and the air volume can be set to two different levels. For shrink hoses. Technical data: Length/Ø (at shock protection): 325 mm / 85 mm Voltage: 230 V / 50 Hz (special voltages possible) Power: 2000 W Temperature: 100° - 600° C continuous control Air volume: min. 300 l/min. / max. 500 l/min.
PU 1 1
Heat shrinkable tubes of polyolefin, self extinguished according to MV SS 302, thin and flexible universal using, dielectric strength 15 - 25 KV/mm DIN 53481, operating temperature: - 55° C to 135° C, shrinking temperature: > 115° C, in 10 m length, in self-service-pack
Art. no. 262073 262074 262075 262076 262091 262092 262093 262094
Ø before 1,2 1,6 2,4 3,2 4,8 6,4 9,5 12,7
Ø after 0,6 0,8 1,2 1,6 2,4 3,2 4,8 6,4
mm 0,4 0,5 0,5 0,5 0,5 0,6 0,6 0,6
kg 0,024 0,027 0,045 0,055 0,074 0,106 0,123 0,180
Art. no. 262097
kg 0,773
PU 1
PU 1 1 1 1 1 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
121
Cable protection
Decoiler
Polyethene spiral binding
Decoiler 600
natural, non-flame resistant
The new HAUPA decoiler have been designed for daily intensive use. The most important characteristics of this product are the ease of operation and the light weight. The side elements are made from galvanised powder-coated steel. The ball bearing drums can be adjusted without the need for specialist tools. Four vibration-damping feet prevent unwanted movement of the roller and protect the floor.
Art. no. 262060 262062 262064
TL 30 30 30
Ø 1,5 4 9
g 10 25 32
kg 0,141 0,390 0,780
PU 1 1 1
Length: 350 mm Width: 350 mm Height: 105 mm
Polyethene spiral binding white, nearly flame resistant Art. no. 143398
Art. no. 262066 262068 262069
TL 30 30 30
Ø 1,5 4 9
g 10 25 32
kg 0,156 0,497 0,964
PU 1 1 1
Cable unwinder Cable unwinder
drum-Ø 600
drum/kg 50
kg 3,500
PU 1
Decoiler 1200 The new HAUPA cable decoilers are developed for intensive use. Ease of use and a low weight are fundamental characteristics of this product. The front and the rear sides are made of anodized aluminum with antiskid ribs. For the left and the right side, sink steel with powder coating has been used. Because of this construction, the decoilers are strong, flexible to use, and resistant against heavy circumstances. The roles have bearings and a sliding axis, which make it easy to change the position of the roles without any special tools. Four antiskid buffers ensure that vibrations are subdued and floors remain intact. Length: 610 mm Width: 570 mm Height: 115 mm
4 box cable unwinder
Art. no. 143400
Art. no. 143406
drum/width 330
drum/width 600
drum-Ø 130
drum/kg 50
kg 5,500
PU 1
drum/width 560
drum-Ø 1200
drum/kg 175
kg 9
PU 1
Decoiler 1200 + The new HAUPA cable decoilers are developed for intensive use. Ease of use and a low weight are fundamental characteristics of this product. The front and the rear sides are made of anodized aluminum with antiskid ribs. For the left and the right side, sink steel with powder coating has been used. Because of this construction, the decoilers are strong, flexible to use, and resistant against heavy circumstances. The roles have bearings and a sliding axis, which make it easy to change the position of the roles without any special tools. Four antiskid buffers ensure that vibrations are subdued and floors remain intact.
Cable unwinder Length: 400 mm Width: 400 mm Height: 390 mm
Length: 705 mm Width: 570 mm Height: 115 mm
Art. no. 143404
drum-Ø 600
drum/kg 50
kg 8
PU 1 Art. no. 143402
122
kg/100 I TL CSS
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
drum/width 660
d1 d4 d2 E
drum-Ø 1200
Internal diameter External diameter Hole diameter Length to middle of hole
drum/kg 300
v1 v2 s PrU/PU
kg 10,500
Slim pressing Wide pressing Material thickness Pricing/Packing unit
PU 1
Around the cable
Electrical insulating tape
... convincing solutions
Electro insulating tape
INFO Electrical insulating tape
Electrical insulating tape for the professional application Material: PVC, in tested VDE quality, in accordance with DIN EN 60454-3-1, flame retardant, self-extinguishing. Temperature resistant from -30°C to 105°C, water, weather and UV resistant. Highly flexible with very good adhesive properties, versatile in its uses, tear-resistant and durable, for insulating, bundling and marking. Available in ten colours.
Typical uses in electrical installations Insulation, Sealing, Padding, Protection from corrosion, heat, electromagnetic faults, cable marking, etc Benefits: • VDE tested • DIN EN 60454-3-1 • Easy to unroll • Very good adhesive properties • High flexibility • Wrinkle free adhesion to uneven surfaces • Tear-proof and resistant to aging • Flame retardant • Self-extinguishing • Temperature resistant from -30°C to 105°C • Water, weather and UV resistant • With many uses • For insulating, bundling, marking • Available in 10 colours
• VDE tested • DIN EN 60454-3-1 • Water, weather and UV resistant
Rainbow-Pack • VDE tested • DIN EN 60454-3-1 • Water, weather and UV resistant
Art. no. 263820
124
kg/100 I TL CSS
colour
width/mm length/m 15 10
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
kg 0,035
c2 A M plug
PU 1
Art. no. 263800 263802 263804 263806 263808 263810 263812 263814 263816 263818 263822 263824 263826 263828 263830 263832 263834 263836 263838 263840 263842 263844 263846 263848 263850 263852 263854 263856 263858 263860 263862 263864 263866 263868 263870 263872 263874 263876 263878 263880
width/mm length/m 15 10 15 10 15 10 15 10 15 10 15 10 15 10 15 10 15 10 15 10 15 20 15 20 15 20 15 20 15 20 15 20 15 20 15 20 15 20 15 20 19 20 19 20 19 20 19 20 19 20 19 20 19 20 19 20 19 20 19 20 25 20 25 20 25 20 25 20 25 20 25 20 25 20 25 20 25 20 25 20
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
colour
v1 v2 s PrU/PU
kg 0,035 0,035 0,035 0,035 0,035 0,035 0,035 0,035 0,035 0,035 0,060 0,060 0,060 0,060 0,060 0,060 0,060 0,060 0,060 0,060 0,076 0,076 0,076 0,076 0,076 0,076 0,076 0,076 0,076 0,078 0,100 0,100 0,100 0,010 0,100 0,100 0,100 0,100 0,100 0,100
Slim pressing Wide pressing Material thickness Pricing/Packing unit
PU 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 1 6 6 6 6 6 6 6 6 6
Around the cable
Fish tapes, cable pulling device system
... convincing solutions
Fish tapes Steel fish tapes
Perlon fish tapes
with eyelet and brass rolling ball, without additional pilot spring
made from stretched „Bayer-Perlon wire“, black, with solid steel end pieces, without additional pilot spring, strip size 4 mm
Art. no. 150152 150154 150156 150158
TL 10 15 20 25
Ø 3,5 3,5 3,5 3,5
kg/100 13,100 20,800 26,800 32,300
PU 1 1 1 1
PE 1 1 1 1
Spiral fish tapes
TL 5 10 15 20 25 30
Ø 4 4 4 4 4 4
kg/100 31,200 69,100 98,800 134,300 182,000 185,900
PU 1 1 1 1 1 1
TL 10 15 20 25 30
Ø 4 4 4 4 4
kg/100 15,200 23,600 30,300 40,200 44,500
PU 1 1 1 1 1
PE 1 1 1 1 1
Perlon fish tapes
made from steel spirals, fourfold twisted, with solid steel end pieces, strip size 4 mm
Art. no. 150200 150202 150204 150206 150208 150210
Art. no. 150232 150234 150236 150238 150239
made from stretched „Bayer-Perlon wire“, black, with solid steel end pieces, with 2 eyes, strip size 3 mm
PE 1 1 1 1 1 1
Perlon fish tapes made from stretched „Bayer-Perlon wire“, black, with solid steel end pieces, with additional pilot spring, approx. 120 mm length
Art. no. 150450 150452 150454 150456 150458 150462 150464 150466 150468 150470
TL 5 10 15 20 25 5 10 15 20 25
Ø 3 3 3 3 3 4 4 4 4 4
kg/100 4,800 9,900 13,900 16,300 21,800 8,000 15,800 24,000 29,200 38,900
PU 1 1 1 1 1 1 1 1 1 1
PE 1 1 1 1 1 1 1 1 1 1
Perlon fish tapes made from stretched „Bayer-Perlon wire“, black, with solid steel end pieces, with 2 spring and 2 eyes, strip size 4 mm
Art. no. 150220 150222 150224 150226 150228 150230 150241 150243 150245 150247
126
kg/100 I TL CSS
TL 5 10 15 20 25 30 10 15 20 25
Ø 3 3 3 3 3 3 4 4 4 4
Weight in kg/100 Length Total length Conductor cross section
kg/100 6,000 10,300 14,100 18,800 24,600 24,400 16,000 23,400 30,300 38,600
IN B c c1
Identification number Flange width Flange length Flange length1
PU 1 1 1 1 1 1 1 1 1 1
c2 A M plug
PE 1 1 1 1 1 1 1 1 1 1
Art. no. 150476 150478 150480 150482
Flange length2 Sleeve length Thread metric Connector gauge
TL 10 15 20 25
d1 d4 d2 E
Ø 4 4 4 4
Internal diameter External diameter Hole diameter Length to middle of hole
kg/100 18,000 26,000 33,200 41,200
v1 v2 s PrU/PU
PU 1 1 1 1
Slim pressing Wide pressing Material thickness Pricing/Packing unit
PE 1 1 1 1
Cable pulling device, accessories Cable pulling device HAUPA-FIBRE
Special pulling aid
Cable pulling device with glass fibre rod Ø 3 mm, with PP casing, including front/ end sleeve M5.
for fast pulling of glass fibre rods Ø 3 mm
Art. no. 143024
Ø M5 3-6
kg 0,047
PU 1
kg 0,012
PU 1
kg 0,022 0,034
PU 1 1
kg 0,041
PU 1
kg 0,017
PU 1
Special fast glue for glass fibre rod Ø 3 mm
Art. no. 143026
Further accessories HAUPA FIBRE Replacement glass fibre rod Ø 3 mm, length 20/30 m, including front/end sleeve M5 Art. no. 143000 143002 143002/ECO
TL 20 30 30
Ø 3 3 3
HAUPA-FIBRE 20 m HAUPA-FIBRE 30 m HAUPA-FIBRE 30 m
kg 1,199 1,500 1,198
PU 1 1 1
kg 0,020
PU 1
kg 0,200
PU 1
Pulling unit with loop M5 Art. no. 143008
M5
Ø 6
Art. no. 143004 143006
TL 20 30
Ø 3 3
Service set for HAUPA-FIBRE 5 front sleeves, 5 guiding heads, 3 connection sleeves, 1 special fast glue
Guiding head Ø 6 mm with loop M5 Art. no. 143010
M5
Ø 6
M5
Ø 7
M5
Guiding head Ø 13 mm with loop M5
Guiding head Ø 7 mm with loop M5 Art. no. 143012
Art. no. 143028
kg 0,010
PU 1
kg 0,011
PU 1
kg 0,005
PU 1
kg 0,003
PU 1
kg 0,007
PU 1
Art. no. 143030
M5
Ø 13
Guiding head Ø 10 mm with loop M5 Art. no. 143014
M5
Ø 10
Front/end sleeve M5 Art. no. 143016
M5
Connection sleeve for probes Ø 3 mm Art. no. 143018
M5
Ø 3
Cable grips Art. no. 143020
TL Ø 200 4-6
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
127
Cable pulling device, accessories Cable pulling device FOX
Front/end sleeve M5
Cable pulling device FOX with glass fibre rod Ø 4.5 mm and green PP coating RAL 6018, with zinced steel winder Ø 330 mm, standing version, complete with front/ end sleeve M5 and pulling head M5 with loop
Art. no. 143070
M5
kg 0,100
PU 1
kg 0,002
PU 1
Connection sleeve for probes Ø 4.5 mm Art. no. 143072
Art. no. 143050 143052 143054
TL 40 60 80
Ø 4,5 4,5 4,5
kg 3,900 4,400 4,800
PU 1 1 1
kg 0,900 1,400 1,800
PU 1 1 1
kg 0,011
PU 1
kg 0,100
PU 1
kg 0,100
PU 1
kg 0,010 0,011 0,017
PU 1 1 1
kg 0,038
PU 1
M5
Ø 4,5
Replacement glass fibre rod FOX Ø 4.5 mm, complete with front/end sleeve M5
Art. no. 143056 143058 143060
TL 40 60 80
M5 M5 M5
Ø 4,5 4,5 4,5
Guiding head with loop M5
Art. no. 143062
M5
Front bulb with shackle M5 Art. no. 143064
M5
Guiding role made from aluminium M5
Art. no. 143066
M5
Guiding head Ø 7 mm with loop M5 Art. no. 143012 143014 143030
M5 M5 M5
Ø 7 10 13
Guiding head set with heads Ø 7, 10, 13 mm
Art. no. 143068
128
kg/100 I TL CSS
M5 Weight in kg/100 Length Total length Conductor cross section
3-pieces IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Cable pulling device, accessories Cable pulling device SIX
Guiding head M6
Cable pulling device SIX with glass fibre rod Ø 6.0 mm and green PP coating RAL 6018, with zinced steel winder Ø 550 mm, in lying and standing version with wheels, complete with front/end sleeve M6 and pulling head M6 with loop
Art. no. 143132
M6
Ø 6
kg 0,017
PU 1
kg 0,013
PU 1
kg 0,012
PU 1
Front/end sleeve M6
Art. no. 143134
M6
Connection shackle for probes Ø 6 mm
Art. no. 143136 lying version Art. no. 143100 143102 143104 143105
TL 40 60 80 100
Ø 6 6 6 6
kg 5,200 5,900 6,800 7,700
PU 1 1 1 1
standing version Art. no. TL 143106 40 143108 60 143110 80 143111 100
Ø 6 6 6 6
kg 7,200 8,300 9,400 10,300
PU 1 1 1 1
standing version with wheels Art. no. TL 143112 40 143114 60 143116 80 143117 100
Ø 6 6 6 6
kg 7,400 8,500 9,600 10,500
PU 1 1 1 1
kg 1,700 2,500 3,250 4,150
PU 1 1 1 1
kg 0,018
PU 1
kg 0,022
PU 1
kg 0,026
PU 1
M6
Ø 6
Replacement glass fibre rod SIX Ø 6 mm, including front/end sleeve M6
Art. no. 143118 143120 143122 143124
TL 40 60 80 100
M6 M6 M6 M6
Ø 6 6 6 6
Guiding head with loop M6
Art. no. 143126
M6
Ø 6
Front bulb with shackle M6 Art. no. 143128
M6
Guiding role made from aluminium
Art. no. 143130
M6
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
129
Cable pulling device, accessories Cable pulling device FIX
Front/end sleeve M12
Cable pulling device FIX with glass fibre rod Ø 7.5 mm ad green PP coating RAL 6018, with zinced steel winder Ø 630 mm, in standing version and with wheels, including front/end sleeve M12 and front bulb with shackle M12
Art. no. 143186
M12
kg 0,004
PU 1
kg 0,003 0,150 0,075
PU 1 1 1
kg 0,006
PU 1
kg 0,300
PU 1
kg 0,350 0,046 0,090
PU 1 1 1
kg 0,200 0,098 0,400
PU 1 1 1
Connection sleeve for probes Ø 7.5 mm
Art. no. 143187 143188 143266
Ø 7,5 9 11
Connection sleeve with rotator
Art. no. 143190
standing version Art. no. TL 143150 40 143152 60 143154 80 143156 100 143158 120
Ø 7,5 7,5 7,5 7,5 7,5
kg 8,100 9,400 10,700 11,900 13,100
PU 1 1 1 1 1
standing version with wheels Art. no. TL Ø 143160 40 7,5 143162 60 7,5 143164 80 7,5 143166 100 7,5 143168 120 7,5
kg 9,100 10,400 11,700 12,900 14,100
PU 1 1 1 1 1
Replacement glass fibre rod FIX
TL 83 M12
Ø 30
Catch device made from zinced steel Catch device made from zinced steel to connect glass fibre rods from two opposite sides with M12 connections on both sides
Art. no. 143192
M12
Ø 7,5
Ø St.
Øtu/mm
7,5
60-80
Catch device made from zinced steel Catch device made from zinced steel to connect glass fibre rods from two opposite sides with M12 connections on both sides
Ø 7.5 mm, including front/end sleeve M12
Art. no. 143170 143172 143174 143176 143178
TL 40 60 80 100 120
M12 M12 M12 M12 M12
Ø 7,5 7,5 7,5 7,5 7,5
kg 1,500 2,000 3,000 3,700 4,500
PU 1 1 1 1 1
M12 M12 M12
M12
kg 0,010
PU 1
kg 0,200
PU 1
kg 0,220
PU 1
Ø St.
Øtu/mm
7,5/9/11/14,5 7,5/9/11/14,5 7,5/9/11/14,5
80-100 100-125 125-160
Pipe cleaning brush
Art. no. 143200 143202 143204
Front bulb with shackle M12
Art. no. 143180
Art. no. 143194 143196 143198
Ø after 80 mm 97 mm 117 mm
Guiding role made from aluminium
Art. no. 143182
M12
Guiding role made from aluminium, length 80 mm
Art. no. 143184
130
kg/100 I TL CSS
M12
Ø 40
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Cable pulling device, accessories Cable pulling device STRONG
Cable pulling device POWER
Cable pulling device STRONG with glass fibre rid Ø 9 mm and green PP coating RAL 6018, with zinced steel winder Ø 795 mm (1000 with wheels), in standing version and with wheels, including front/end sleeve M12 and front bulbs with shackle M12
standing version Art. no. 143210 143212 143214
TL 40 60 80
standing version with wheels Art. no. TL 143216 100 143218 120 143220 150
Cable pulling device POWER with glass fibre rod Ø 11 mm and green PP coating RAL 6018, with zinced steel winder Ø 1000 mm, width 150 mm, standing version with wheels, including front/end sleeve M12 and front bulb with shackle M12
Ø 9 9 9
kg 9,100 12,900 14,820
PU 1 1 1
Ø 9 9 9
kg 29,400 31,300 33,900
PU 1 1 1
standing version with wheels Art. no. TL 143250 150 143252 200 143254 250 143256 300
Ø 11 11 11 11
kg 43,000 50,000 56,500 64,500
PU 1 1 1 1
kg 21,900 29,200 36,400 43,900
PU 1 1 1 1
Replacement glass fibre rod POWER Ø 9 mm, including front/end sleeve M12
Replacement glass fibre rod STRONG Ø 9 mm, including front/end sleeve M12 Art. no. 143258 143260 143262 143264 Art. no. 143222 143224 143226 143228 143230 143232
TL 40 60 80 100 120 150
Ø 9 9 9 9 9 9
kg 3,800 5,500 7,500 9,400 11,300 13,900
PU 1 1 1 1 1 1
TL 150 200 250 300
Ø 11 11 11 11
Cable pulling device KING Cable pulling device KING with glass fibre rod Ø 14.5 mm and black PP coating, with steel winder Ø 1500 mm with wheels, including front/end sleeve M12 and front bulb with shackle M12
standing version with wheels Art. no. TL Ø 143270 150 14,5 143272 200 14,5 143274 250 14,5 143276 300 14,5 143278 350 14,5 143280 400 14,5
kg 85,000 99,000 113,000 127,000 141,000 156,000
PU 1 1 1 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
131
Accessories STRONG, POWER, KING
Cable grips
Front bulb with shackle M12
Art. no. 143180
Cable grips for electrical installations
M12
kg 0,010
PU 1
kg 0,200
PU 1
kg 0,220
PU 1
Hand-braided cable grips made from zinced steel braid with a flexible Towing ring with front unit M5 and integrally moulded Talurit ferrule
Guiding role made from aluminium
Art. no. 143182
M12
Guiding role made from aluminium, length 80 mm
Art. no. 143184
M12
Ø 40
M12
kg 0,004
PU 1
kg 0,003 0,150 0,075
PU 1 1 1
Connection sleeve for probes Ø 7.5 mm
Art. no. 143187 143188 143266
TL 200 210 420 460 500 520 520
Ø 4-6 6-9 8-12 12-15 15-19 19-25 25-31
kg 0,009 0,013 0,024 0,029 0,200 0,052 0,400
PU 1 1 1 1 1 1 1
kg 0,378 0,465 0,380 0,460 0,424 0,510 0,430 0,200 0,388 0,520 1,120
PU 1 1 1 1 1 1 1 1 1 1 1
kg 0,250 0,250 0,250 0,250
PU 1 1 1 1
Cable grips for subterraneous cable laying Hand-braided cable grips made from zinced steel braid with 1 loop or 2 loops and integrally moulded Talurit ferrule
Front/end sleeve M12
Art. no. 143186
Art. no. 143300 143302 143304 143306 143308 143310 143312
Ø 7,5 9 11
Connection sleeve with rotator
Art. no. 143314 143316 143318 143320 143322 143324 143326 143328 143330 143332 143334
TL 600 600 700 700 700 700 800 800 800 800 800
Ø 10-20 10-20 20-30 20-30 30-40 30-40 40-50 40-50 50-65 50-65 65-80
Cord und cable grips Art. no. 143190
TL 83 M12
Ø 30
kg 0,006
PU 1
Catch device made from zinced steel Catch device made from zinced steel to connect glass fibre rods from two opposite sides with M12 connections on both sides
Art. no. 143194 143196 143198
M12 M12 M12
Ø St.
Øtu/mm
7,5/9/11/14,5 7,5/9/11/14,5 7,5/9/11/14,5
80-100 100-125 125-160
kg 0,350 0,046 0,090
PU 1 1 1
kg 0,200 0,098 0,400
PU 1 1 1
Art. no. 143336 143338 143340 143342
TL 1200 1200 1200 1200
Ø 8-16 10-20 20-30 30-40
Pipe cleaning brush
Art. no. 143200 143202 143204
132
kg/100 I TL CSS
Ø after 80 mm 97 mm 117 mm
Weight in kg/100 Length Total length Conductor cross section
IN B c c1
Identification number Flange width Flange length Flange length1
c2 A M plug
Flange length2 Sleeve length Thread metric Connector gauge
d1 d4 d2 E
Internal diameter External diameter Hole diameter Length to middle of hole
v1 v2 s PrU/PU
Slim pressing Wide pressing Material thickness Pricing/Packing unit
Lubricants and slip agents Water-based lubricants and slip agents
Dispenser for plastic bottle
This prevents 80% of friction and facilitates cable laying through excellent slippage in every situation. As soon as the water is evaporated, the main part of the lubricant remains und ensures that old cables can easily be pulled out and new ones inserted, for many years and at different temperatures. Gel lubricant art. 143344: plastic bottle 500 ml Gel lubricant art. 143345: plastic bottle 1.000 ml
Art. no. 143344
kg 0,572
PU 1
kg 0,457
PU 1
Art. no. 143346
kg 0,016
PU 1
Water-based lubricants and slip agents This prevents 80% of friction and facilitates cable laying through excellent slippage in every situation. As soon as the water is evaporated, the main part of the lubricant remains und ensures that old cables can easily be pulled out and new ones inserted, for many years and at different temperatures. Foam lubricant, spray can 400 ml
Art. no. 143348
Legend cable pulling device Pipe diameter
Pushing energy
Min. bending radius
Breaking strength
ø mm
ø mm
kg
mm
kg
Pulling strength with starting/ ending
kg
R
Advised length
m
L
page
Rod diameter
FIBRE 3,0 mm
16-32
+++
160
400
110
20-30 (+ 2-3 m)
127
FOX 4,5 mm
40-60
+++
310
1200
170
20-40 (+ 3-5 m)
128
SIX 6,0 mm
50-80
++++
400
2000
230
30-60 (+ 3-5 m)
129
FIX 7,5 mm
63-100
++++
500
3200
290
40-70 (+ 3-5 m)
130
STRONG 9,0 mm
63-125
++++
620
4400
340
60-150 (+ 3-5 m)
131
POWER 11,0 mm
63-150
++++
770
6250
500
100-300 (+ 3-5 m)
131
KING 15,0 mm
100-250
++++
1150
15000
550
150-450 (+ 3-5 m)
131
PERLON® 3,0 mm
16
+
80
200
110
5-15 (+ 2-3 m)
126
SPIRAL 4,0 mm
20-32
+
180
115
115
10-25 (+ 3-5 m)
126
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
133
Working under tension
Safety tools
...convincing solutions
VDE screwdrivers
INFO Screwdriver range
Industrial quality
Screwdriver range according to the new VDE Norm 1000 V IEC 60900:2004. All blades are made of high quality Molybdenum vanadium steel, black, red-covered, Polypropylen moulded. This ergonomic moulded 2-component handles from PP/TPE material guarantees a high security with normal power transmission. Every screwdriver is individually tested and marked according to the new VDE-Norm.
1 Homogeneous sizes-adaptation of the screwdrivers haft for better power transmission. Increase of the soft area for stronger grip
2 Exclusive, ergonomic design, non-slipping 2-component handles from PP/TPE material
3
1000 V IEC 60900:2004
Roll repressive
4 Injected blades profile on the top of the handle – for a fast access in the tool box, abrasion is not possible
5 with 1000 V marking injected
6 An addition anti-slip protection on Phillips profiles prevents the tool from slipping out of the screw
magnetic blade
VDE 2-component screwdriver with PZ slot profile Specifications and advantages of the PZ/FL profile. The PZ/FL profile can only be used for combination screws that were previously screwed with a slot or recessed head PZ type screwdriver. The screws have an inner PZ profile with an additional cross slot that also allows it to be screwed with a slot screwdriver.
Area of application for PZ/FL profile The screws are mainly used in electrical installation in automatic circuit breakers and safety switches
VDE 2-component screwdriver with PZ slot profile Contents: Art. 101870 Art. 101872 1000 V IEC 60900:2004
1000 V IEC 60900:2004
Art. No. 101879
136
size 1+2
kg Size TL Ø
Weight in kg Size Total length Cross-section mm
set 2-pieces
CW L W No.
kg 0,200
Cutting width Length in mm Width mm Number
PU 1
Cont. BL mm² St.
Art. No. 101870 101872
size 1 2
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
total length 205 270
Ø mm 5,0 x 80 6,0 x 100
Colour Material Tested/Measured area Wrench size
kg 0,060 0,094
Sbl. Drive Load PU
PU 1 1
Saw blade length Drive Load Packing unit/piece
2-component VDE electricians’ screwdrivers
2-component VDE screwdrivers set
with 2 component handle made from PP/TPE material, blade made from molybdenum vanadium steel, hardened, blasted, routine checked, insulated
with 2 component handle made from PP/TPE material, blade made from molybdenum vanadium steel, hardened, blasted, routine checked, insulated, 6-pieces. Contents: VDE Electricians’ screwdriver 2,5 x 75 mm, 4 x 100 mm, 5,5 x 125 mm, 6,5 x 150 mm, VDE cross slotted screwdrivers Phillips or Pozidriv size 1 and 2
Art. no. 101910 101912 101914 101916 101918 101920 101922 101924
CW 2,5 3 3,5 4 5,5 6,5 8 10
BL 75 100 100 100 125 150 175 200
TL 155 185 185 195 230 255 295 320
kg 0,027 0,029 0,035 0,052 0,070 0,108 0,177 0,245
PU 1 1 1 1 1 1 1 1 Art. no. 101999 101999/PZ
2-component VDE cross slotted screwdrivers Phillips
Phillips Pozidriv
kg 0,414 0,416
6-pieces 6-pieces
PU 1 1
with 2 component handle made from PP/TPE material, blade made from molybdenum vanadium steel, hardened, blasted, routine checked, insulated
Socket wrenches 2-component VDE socket wrenches DIN 7445 Art. no. 101940 101942 101944 101946
size 0 1 2 3
BL 60 80 100 150
TL 145 175 205 270
kg 0,034 0,061 0,100 0,165
PU 1 1 1 1
with 2 component handle made from PP/TPE material, blade made from molybdenum vanadium steel, hardened, blasted, routine checked, insulated
2-component VDE cross slotted screwdrivers Pozidriv with 2 component handle made from PP/TPE material, blade made from molybdenum vanadium steel, hardened, blasted, routine checked, insulated
Art. no. 101950 101952 101954 101956
size 0 1 2 3
BL 60 80 100 150
TL 135 175 205 270
kg 0,033 0,061 0,095 0,166
PU 1 1 1 1
BL 100 100 100 100 100 125 125 150 175
TL 185 185 195 195 195 220 230 255 295
BL 125 125 125 125 125 125 125 125 125 125 125
TL 220 220 220 220 230 230 230 230 245 245 245
kg 0,105 0,109 0,116 0,111 0,116 0,119 0,122 0,125 0,167 0,165 0,175
PU 1 1 1 1 1 1 1 1 1 1 1
with 2 component handle made from PP/TPE material, blade made from molybdenum vanadium steel, hardened, blasted, routine checked, insulated. Contents: 1 piece each 5 - 5,5 - 7 - 8 - 10 - 11 - 13 mm
with security pin, with 2 component handle made from PP/TPE material, blade made from molybdenum vanadium steel, hardened, blasted, routine checked, insulated
size 08 09 10 15 20 25 27 30 40
WS 4 5 5,5 6 7 8 9 10 11 12 13
2-component VDE socket wrenches set DIN 7445
2-component VDE screwdrivers Tx
Art. no. 101850 101852 101854 101856 101858 101860 101862 101864 101866
Art. no. 102520 102522 102524 102526 102528 102530 102532 102534 102536 102538 102540
kg 0,053 0,051 0,053 0,053 0,052 0,070 0,072 0,109 0,178
PU 1 1 1 1 1 1 1 1 1
Art. no. 102512
7-pieces
kg 1,065
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
137
HAUPA „Vario“ 1000 V replaceable blade system HAUPA „Vario“ 1000 V replaceable blade system
HAUPA „Vario“ 1000 V replaceable blade system
The „Vario“ replaceable blade system with insulated replaceable blades from HAUPA. All screwdrivers are tested individually (IEC 60900: 2004) and ensure you are able to work safely up to 1000 V and provides the blades with a secure hold in the approved 2-component handle. The automatic locking mechanism ensures that blades do not fall out unexpectedly. Adding the screw cap allows you to use the screwdriver for electronics as well. This practical new system allows you to handle all of the commonly used profiles with no trouble at all. Ideal for all service technicians as the blade selection can be expanded to cover your individual requirements. The tough roll carrier is made of nylon (with a belt loop and hook and eye fastening) and is a compact set characterised by its high levels of practicality and convenience. Further characteristic feature include: • High level of safety • Exchangeable cap for use as an electronics screwdriver • Switching cabinet key is integrated into the system • Space-saving • Weight-saving • Cost-effective price/ performance ratio • Meets all relevant standards
Insulated replaceable blade made from molybdenum vanadium steel, hardened, blasted, individually tested with hexagonal shaft
„Vario“ replaceable blade – slotted blade Art. no. 102014 102016 102017 102018 102020 102022
CW 2,5 3,0 3,5 4,0 5,5 6,5
BL 85 85 85 85 85 85
TL 165 165 165 165 165 165
kg 0,013 0,015 0,080 0,022 0,034 0,045
PU 1 1 1 1 1 1
kg 0,023 0,035 0,044
PU 1 1 1
kg 0,023 0,035 0,045
PU 1 1 1
„Vario“ replaceable blade – Phillips blade Art. no. 102001 102002 102004
size 0 1 2
BL 85 85 85
TL 165 165 165
„Vario“ replaceable blade – pozidrive blade Art. no. 102005 102006 102008
size 0 1 2
BL 85 85 85
TL 165 165 165
„Vario“ replaceable blade – pozidrive blade/slotted Art. no. 102010 102012
size 1 2
BL 85 85
TL 165 165
kg 0,035 0,045
PU 1 1
kg 0,016 0,016 0,016 0,021 0,021 0,034 0,041
PU 1 1 1 1 1 1 1
kg 0,010 0,009
PU 1 1
kg 0,009
PU 1
kg 0,009
PU 1
kg 0,002
PU 1
HAUPA „Vario“ 1000 V replaceable blade system in robust nylon bag, Contents: 2C exchangeable handle, screw cap, replaceable blade - slotted blade 0.4 x 2.5 / 0.5 x 3.0 / 0.8 x 4.0 / PH1 / PH2 or PZ1 / PZ2, PZ/FL 2, switch cabinet key – square 1, double-bit Art. no. 102000 102000/PZ
kg 0,340 0,334
Phillips hexagonal 10 pieces Pozidriv hexagonal 10 pieces
PU 1 1
„Vario“ replaceable blade – torx blade Art. no. 102060 102062 102064 102066 102068 102070 102072
size 8 9 10 15 20 25 30
BL 85 85 85 85 85 85 85
TL 165 165 165 165 165 165 165
„Vario“ nylon bag – empty Robust nylon bag (with belt loop) wide hook and eye fastening and loop for hanging up
„Vario“ switch cabinet key – Square Art. no. 102030 102032
Art. no. 102042
empty
width 215
height 290
kg 0,088
PU 1
size 6 8
BL 47 47
„Vario“ switch cabinet key – Triangular Art. no. 102034
size 9
BL 47
2-component exchangeable „Vario“ handle automatic locking mechanism ensures that blades do not fall out unexpectedly, ergonomically formed 2 component book of PP/TPE material
„Vario“ switch cabinet key – Double-bit Art. no. 102036
size 5,3
BL 47
„Vario“ screw cap Additional screw cap when using as precision tool (electronics) Art. no. 102040
138
kg Size TL Ø
TL 120
kg 0,058
Slot: hexagonal
Weight in kg Size Total length Cross-section mm
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1
Art. no. 102044 Contents Blade length Diameter in mm² Cutting strength
TL 10 Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
VDE pliers, sheathed handles
INFO 2 component pliers
Industrial quality
HAUPA divides the VDE pliers assortment into three groups. 1. 2C VDE pliers with plug-on handles 2. VDE pliers, coating-insulated, treated with a 2-coloured coatingisolation (outside red/inside yellow) 3. VDE pliers with a 2-coloured coating-isolation (outside red/inside yellow), working head insulated
TL 160
kg 0,202
PU 1
kg 0,268 0,322
PU 1 1
Heavy duty side cutters DIN 5238 A VDE
Combination pliers DIN 5244 VDE
C 60, cutting edges induction hardened, chrome plated, sheathed handles
german pattern, comfort grip, alloyed carbon steel, C 45, oil-hardened, cutting edges induction hardened, for soft and hard wire up to 150 kp/mm² (N 1500), chrome plated, sheathed handles
TL 185 205
C 45, oil-hardened, with spring and adjustment screw, for cable of 0,2 - 6 mm Ø, chrome plated, sheathed handles
Art. no. 211214
These pliers fulfil the VDE standard 1000 V IEC 60900:2004
Art. no. 211200 211202
Wire stripping pliers DIN 5232 VDE
kg 0,287 0,364
PU 1 1
Art. no. 211217 211219
TL 170 205
Long chain nose pliers DIN 5236 A VDE C 45, oil-hardened, with spring and adjustment screw, for cable of 0,2 - 6 mm Ø, chrome plated, sheathed handles
Side cutters DIN 5238 B VDE swedish pattern, high alloyed carbon steel, oil-hardened, C 60, cutting edges induction hardened, for soft and hard wire up to 200 kp/mm² (N 2000), chrome plated, sheathed handles
Art. no. 211204 211206
TL 165 185
kg 0,237 0,296
PU 1 1
Art. no. 211208 211210
TL 200 200
straight 45° angled nose
Side cutting pliers with stripping function
Short flat nose pliers DIN 5258 VDE
Swedish design, power class H, C 60, oil-hardened, induction hardened blades, for hard and soft wire up to 200 kp/mm² (N 2000), high-gloss chrome plated, push-on grips. Aside from their traditional advantages, these side cutting pliers also possess an additional wire stripping function.
C 45, oil-hardened, chrome plated, short body, sheathed handles
Art. no. 211212
TL 160
kg 0,255 0,260
PU 1 1
kg 0,168
PU 1
kg 0,161
PU 1
Short round nose pliers DIN 5257 VDE Art. no. 211203 211207
TL 165 185
kg 0,296 0,296
PU 1 1
C 45, alloyed carbon steel, oil-hardened, chrome plated, sheathed handles
Art. no. 211216
TL 160
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
139
VDE pliers, sheathed handles Water pump pliers VDE
Fully insulating 1000 V PVC flat nose pliers
C 45, alloyed carbon steel, oil-hardened, chrome plated, sheathed handles
all of plastic, specially for mounting and blocking of electricmeters
Art. no. 120051 Art. no. 211221
TL 240
kg 0,392
PU 1
TL 190
kg 0,109
PU 1
kg 0,084
PU 1
Flat nose pliers 1000 V all of plastic, specially for mounting and blocking of electricmeters
Cable cutters VDE C 45, alloyed carbon steel, oil-hardened, bronzed, sheathed handles
Art. no. 120052 Art. no. 211223 211225
TL 200 160
Ø 12 10
kg 0,352 0,215
PU 1 1
kg 0,268 0,457
PU 1 1
TL 160
Cable cutters VDE with spring joint C 45, alloyed carbon steel, oil-hardened, bronzed, chrome plated, sheathed handles
Art. no. 211226 211228
TL 170 230
Ø 10 15
2 components pliers set VDE, sheathed handles with VDE-safety-isolation, best quality, pliers chrome plated, 4-pieces. Contents: • Combination pliers 185 mm • Side cutter 165 mm • Long chain nose pliers 200 mm • Wire stripping pliers 160 mm
Art. no. 220123
140
kg Size TL Ø
kg 1,063
4-pieces
Weight in kg Size Total length Cross-section mm
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
VDE-pliers, 2-coloured coating-insulation Combination pliers DIN 5244 VDE
Long chain nose pliers DIN 5236 A VDE
alloyed carbon steel, C 45, oil-hardened, cutting edges induction hardened, for soft and hard wire up to 150 kp/mm² (N 1500), german pattern, chrome plated, 2-coloured coating-insulation - inside yellow/outside red
alloyed carbon steel, C 45, oil-hardened, cutting edges induction hardened, for any wire up to 150 kp/mm² (N 1500), chrome plated, 2-coloured coatinginsulation - inside yellow/outside red
Art. no. 210056 210058
TL 185 205
kg 0,300 0,418
PU 1 1 Art. no. 210388 210390
Side cutters DIN 5238 B VDE swedish pattern,high alloyed carbon steel, oil-hardened, C 60, cutting edges induction hardened, for soft and hard wire up to 200 kp/mm² (N 2000), chrome plated, 2-coloured coating-insulation - inside yellow/outside red
TL 200 200
straight 45° angled nose
kg 0,270 0,256
PU 1 1
Short round nose pliers DIN 5257 VDE C 45, alloyed carbon steel, oil-hardened, chrome plated, 2-coloured coatinginsulation - inside yellow/outside red
Art. no. 210100 210102
TL 165 185
kg 0,253 0,303
PU 1 1
Art. no. 210296
TL 160
kg 0,180
PU 1
Side cutters DIN 5238 B VDE swedish pattern, high alloyed carbon steel, oil-hardened, C 60, cutting edges induction hardened, for soft and hard wire up to 200 kp/mm² (N 2000), chrome plated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 210110 210117 210119
TL 240 180 200
kg 0,489 0,274 0,368
Short flat nose pliers DIN 5258 VDE C 45, alloyed carbon steel, oil-hardened, chrome plated, 2-coloured coatinginsulation - inside yellow/outside red
PU 1 1 1
Art. no. 210270
TL 160
kg 0,187
PU 1
Wire stripping pliers DIN 5232 VDE C 45, oil-hardened, with spring and adjustment screw, for cable of 0,2 - 6 mm Ø, chrome plated, 2-coloured coating-insulation - inside yellow/outside red
Front cutters VDE alloyed carbon steel, cutting edges induction hardened, chrome plated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 210303
TL 160
kg 0,328
PU 1
Art. no. 210648
TL 160
kg 0,232
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
141
VDE-pliers, 2-coloured coating-insulation Water pump pliers heavy pattern, made of chrome vanadium steel, with roll, chrome plated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 210588
TL 260
kg 0,590
PU 1
Water pump pliers DIN 5231 chrome vanadium, 31 Cr V3, box-joint, burner hole, teeth induction hardened, finger protection, oil-hardened, 2-coloured coating-insulation - inside yellow/ outside red, chrome plated
Art. no. 210583
TL 300
kg 0,423
PU 1
Pliers set, 2-coloured coating-insulation C 45, oil-hardened, 2-coloured coating-insulation - inside yellow/ outside red. Pliers chrome plated, 4-pieces. Contents: • Combination pliers 185 mm • Diagonal cutters 165 mm • Long chain nose pliers, straight 200 mm • Wire stripping pliers 160 mm
Art. no. 220126
142
kg Size TL Ø
kg 1,000
4-pieces
Weight in kg Size Total length Cross-section mm
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
VDE pliers, coating-insulated, head insulated Combination pliers DIN ISO 5244 VDE
Long chain nose pliers DIN ISO 5745 VDE
working head insulated, 2-coloured coating-insulation - inside yellow/outside red
working head insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 210263 210264
Art. no. 210300
TL 185 205
kg 0,306 0,372
PU 1 1
TL 160
kg 0,191
PU 1
Wire stripping pliers DIN 5232 VDE Side cutters DIN ISO 5749 VDE
working head insulated, 2-coloured coating-insulation - inside yellow/outside red
working head insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 210301 210302
TL 160 180
kg 0,270 0,309
PU 1 1
Art. no. 210265
TL 160
kg 0,180
PU 1
Long chain nose pliers DIN ISO 5754 VDE straight, working head insulated, 2-coloured coating-insulation - inside yellow/ outside red
Art. no. 210266 210267 210297
TL 160 200 160
straight straight 45° angled nose
kg 0,182 0,236 0,228
PU 1 1 1
Plan grip pliers VDE working head insulated, made of special alloy steel, long, flat, plain griping jaws, round edges, 2-coloured coating-insulation - inside yellow/outside redyellow/ outside red
Art. no. 210298
TL 200
kg 0,215
PU 1
Short flat nose pliers DIN ISO 5745 VDE working head insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 210299
TL 160
kg 0,216
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
143
VDE cable cutters, stripping Cable cutter
Cable cutter with a snap VDE
Grave version of vanadium steel, annealed, opening 15 mm, 2-coloured coatinginsulation - inside yellow/outside red
Laser-cut components made of special carbon steel, oil-hardened, for optimal precision, CNC-ground cutting type, inductively hardened for maximum cutting performance, Screwed joint connections, re-adjustable for longer durability as well as, 2-coloured coating-insulation - inside yellow/outside red, for cables to 16,9 mm Ø (70 mm²)
Art. no. 200127
TL 160
Ø 15
mm² 50
kg 0,289
PU 1 Art. no. 201002/VDE
Cable cutter
TL 180
Ø 16,9
mm² 70
kg 0,247
PU 1
of carbon-steel, maximum cutting capacity due to special cutting-geometry, with VDE insulation, 2-coloured coating-insulation - inside yellow/outside red
Automatic wire stripper 1000 V 1000 volt individually tested wire stripper. For stripping flexible wires and solid copper wires. The wire stripper adjusts automatically to the cross section of the wire. Stripping range: 0,2 to 6 mm² Art. no. 200120
TL 215
Ø 20
mm² 70
kg 0,403
PU 1
Double edged cable cutter slight strain due to optimal lever-transmission, edges with precise grind for easy and proper cutting by one hand handling, opening 20 mm, forged of special carbon-steel, for copper and alu-cable, 2-coloured coating-insulation inside yellow/outside red Art. no. 211683
mm² 0,2-6
kg 0,151
PU 1
Stripping pliers 1000 V Art. no. 200128
TL 200
Ø 20
mm² 50
kg 0,382
PU 1
full insulated, for cutting and stripping off cable sheaths of PVC, PE and VPE, limited cutting deep and therefore no damage on the inside conductors, easy handling, 2-coloured coating-insulation - inside yellow/outside red
Cable cutters 1000 V with spring joint Chrome-vanadium, shear edge, fatigue-free handling due to spring joint, selfopening, with locking mechanism, enormous cutting performance allows effort-free operation, for copper and aluminium cable, chrome plated
Art. no. 200149 Art. no. 200086/VDE 200088/VDE
TL 205 230
Ø 10 15
mm² 10 15
kg 0,274 0,479
TL 200
Ø 26-52
kg 0,739
PU 1 1
Cable cutter Long version, slight strain, one and two hand handling, proper cutting due to precise grind, forged of special carbon-steel, 2-coloured coating-insulation inside yellow/outside red
Art. no. 200129
144
kg Size TL Ø
TL 240
Ø 15
Weight in kg Size Total length Cross-section mm
mm² 50
CW L W No.
kg 0,484
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1
Cable cutters 1000 V Cable cutters 1000 V
VDE ratchet cable cutter with cover 1000 V
with leverage construction, cutter of alloyed special steel, forged, replaceable, squeeze-free cutting. Working range: for copper- and alu-cable max. 40 mm Ø
One-hand cable cutter with ratchet, optimal lever-transmission, encapsulated head, for copper and alu-cable, opening 25 mm, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 200110 200141
TL 600 700
Ø 26 33
mm² 150 185
kg 2,327 3,292
PU 1 1
Cable cutter 1000 V forged cutting head of special carbon-steel, light strain, easy and proper cutting, adjustable joint, opening 27 mm; working range: copper- and alu-cable up to 150 mm²
Art. no. 200109
TL 290
mm² 240
kg 1,308
PU 1
Hacksaw frames 1000 V Hacksaw frame 1000 V fully insulated, 2-coloured coating-insulation - inside yellow/outside red Art. no. 200123
TL 500
Ø 27
mm² 150
kg 1,389
PU 1
Wire rope and cable cutter 1000 V with lever action, blades of high alloyed interchangeable, cutting capacity steelalu ropes up to 80 mm², for copper- and alucable, opening approx 10 mm
Art. no. 110558
TL 200
Sbl. 150
kg 0,248
PU 1
Hacksaw frame 1000 V fully insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. TL 200081 700 200081/MK
mm² 80 Spare cutting head
kg 2,880 0,350
PU 1 1 Art. no. 110559
TL 350
Sbl. 300
strength 18 x 8
kg 0,732
PU 1
Wire rope and cable cutter 1000 V without transmission, blades of high quality special steel, forged, replaceable, opening 20 mm, insulated. Working range: steel-alu-rope up to 120 mm², copperand alu-cable
Art. no. 200130 200132
TL 600
Ø mm² 20 120 Spare cutting head
kg 2,348 0,340
PU 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
145
Cable knives 1000 V Cable knive 1000 V
Cable knive 1000 V
with strong, straight blade, tough elastic plastic handle, blade protector
with hook blade, specially for slitting of damproom cable, tough elastic plastic handle, blade protector
Art. no. 200000
BL 50
kg 0,110
PU 1
Cable knive 1000 V
Art. no. 200007
BL 50
kg 0,120
PU 1
Cable stripping knive 1000 V
with hookformed blade, tough elastic plastic handle, blade protector
with strong, straight blade, tough elastic plastic handle, blade protector
Art. no. 200002
BL 35
kg 0,093
PU 1
Cable knive 1000 V
Art. no. 200009
BL 50
kg 0,094
PU 1
Cable knive 1000 V
with insulated hookblade, tough elastic plastic handle, blade protector
with straight, part insulated, strong blade, tough elastic plastic handle, blade protector
Art. no. 200003
BL 35
kg 0,074
PU 1
Cable knive 1000 V
Art. no. 201010 201012
BL 50 replacement blades, 4-pcs.
kg 0,067 0,087
PU 1 1
kg 0,094
PU 1
Cable stripping knive 1000 V
with bent blade, strong blade, tough elastic plastic handle, blade protector
tough elastic plastic handle, blade protector, straight
Art. no. 200004
BL 35
kg 0,087
PU 1
Art. no. 200013
BL 50
Cable knive 1000 V with straight, part insulated, strong blade, tough elastic plastic handle, blade protector
Art. no. 200005
146
kg Size TL Ø
BL 40
Weight in kg Size Total length Cross-section mm
kg 0,106
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
Voltage testers Voltage tester “Profi LCD plus”
Voltage tester “Profi plus”
Two-pole voltage tester with LED display. An automatic switch-off function prevents rapid discharge of the batteries. The LC display is particularly professional. This eases the display of phase and phase sequence for all service or installation engineers. As of a voltage of 35V AC/DC an acoustic signal sounds to signalise a voltage which is life-threatening. The switchable load per switch prevents accidental triggering of the residual current circuit breaker ensuring that the protective conductor can be measured. The robust construction form and the dust and watertight housing ensure a long life, even when used on a daily basis. The test tip can be protected by fitting the cap which is connected directly to the unit.
Two-pole voltage tester with LED display. The high quality mix of materials ranging from the water-tight housing and the rubberised handle area underlines the professional appearance. The display field is protected by a break-resistant plastic panel. The robust construction form and the dust and water-tight housing ensure a long life, even when used on a daily basis. The test tip can be protected by fitting the cap which is connected directly to the unit. The use of LED‘s for all optical displays also ensures a high level of protection against failure. As of a voltage of 35V AC/DC an acoustic signal sounds to signalise a voltage which is life-threatening. The switchable load per switch prevents accidental triggering of the residual current circuit breaker ensuring that the protective conductor can be measured. An acoustic signal sounds with a throughput check of 0 to 500 kOhm.
Advantages: - Display of direct and alternating currents of 6 to 1000 Volts - Single-pole phase check - Dual-pole phase sequence check - Throughput check to 150 Ohm (acoustic) - Resistance measurement up to 2000 Ohm - Diode testing - Data-hold function - Display illumination - Residual current circuit breaker/RCD test using two buttons - LED torch (white) - Unscrewable 4 mm test tip adapter - Automatic power off function
Advantages: - Display of direct and alternating currents of 6 to 1000 Volts - Single-pole phase check - Dual-pole phase sequence check - Throughput check to 500 kOhm (acoustic/optic) - Residual current circuit breaker/RCD test using two buttons - LED torch (white) - Unscrewable 4 mm test tip adapter Technical data for Profi LED Plus Display: Optical, 13 LEDs Operating panel: Finger contact/Residual current circuit breaker/RCD button Measuring range: Automatic measurement range selection Voltage range: 6 - 1000 V AC/DC, 0 - 400 Hz Throughput check: 0 - 500 kΩ with acoustic signal Phase display: > 100 V AC Switchable load: Is ~ 30 mA ED(DT) = 30 sec. Power supply: 2 x 1.5 V Over-voltage category: CAT IV 1000 V Dimensions: 238 x 70 x 30 mm Protection class: IP 65 Weight: 200 g Test: TÜV/GS tested and approved IEC/EN 61243-3 (DIN VDE 0682-401) Scope of delivery: 1 x Operating instructions 2x Batteries of type AAA Micro Guarantee: 3 years
Technical data for Profi LCD Plus Display: Optical, 3 1/2 digit, LCD Operating panel: Finger contact, residual current circuit breaker/RCD button, ON/OFF button, D-H button Measuring range: Automatic measurement range selection Voltage range: 6 - 1000 V AC/DC, 0- 400 Hz Resistance test: 0 - 2000 Ω Throughput check: 0 - 150 Ω with acoustic signal Phase display: > 100 V AC Switchable load: Is ~ 30 mA ED(DT) = 30 sec. Power supply: 2 x 1.5 V Over-voltage category: CAT IV 1000 V Dimensions: 238 x 70 x 30 mm Protection class: IP 65 Weight: 200 g Test: TÜV/GS tested and approved IEC/EN 61243-3 (DIN VDE 0682-401) Scope of delivery: 1 x Operating instructions 2x Batteries of type AAA Micro Guarantee: 3 years
Art. no. 103820
Art. no. 103822
TMA 6-1000
kg 0,264
TMA 6-1000
kg 0,264
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
147
Voltage testers Voltage tester „Basic +“ The two pole voltage tester display DC and AC voltage from 6 to 400 V in seven steps with LED indicator (6, 12, 24, 50, 120, 230 and 400 V), Polarity test and phase location against the ground wire is also able. The robust cabinet with the gummed handle is well in the hand. The „Basic“ tester works without any battery. It gets his tension from the test object. Specifications: • DC and AC voltage from 6 to 400 V • phase detector against ground wire • polarity check • protection IP 20 • TÜV/GS approval in process • CAT III 1000 V • 0 – 60 Hz • 3 years warranty
HAUPA “Multi Check” digital high-capacity multimeter The HAUPA digital multimeter is a multimeter with a battery test function. Its auto range function eliminates the need for irritating switching. Its background illumination can be manually adjusted. Also included is the auto-power-off function and a low battery voltage indicator. During the battery test, the batteries under test are loaded so that an exact test result can be made. The embedded holster with foldable stand makes it easy to use in difficult surroundings. The temperature measuring range up to 1000°C/1800°F and the hFE test for transistors rounds the spectrum of the high-capacity multimeter. Modern design, the latest technology plus an extended functional range, breakproof ABS housing and simple operation enable universal use in both industry and trade, even under the toughest of conditions. The integrated LED torch and the incorporated non-contact voltage sensor characterise the Multi Check and increase the safety of the user. Your advantages: | 3 year manufacturer's guarantee | TÜV/GS tested and approved | IEC/EN 61010-1 (DIN VDE 0411)
Art. no. 103800
TMA 6-400
kg 0,097
PU 1
HAUPA “Multi Clamp” digital miniature clamp transducer AC/DC 600V HAUPA “Multi Clamp” - digital miniature clamp transducer AC/DC 600 V. Digital miniature clamp transducer with LCD-Display and a bargraph index. The manual or automatic working range option, as well as the background lighting, allow a multifunctional and safe working. The included plastic case protect the equipment, also during transport. Specifications: • voltage range DC: 400/600 V ±1% • voltage range AC: 400/600 V ±1% • current AC: < 400 A ±2% • clamp diameter max. 28 mm • conductivity < 400 ±1% • automatic test range selector • datahold Function • background lighting • Including: plastic bag, measurement connection, battery • approved and certificated TÜV/GS IEC/EN 61010-1 • 3 years warranty
Art. no. 103810
148
kg Size TL Ø
kg 0,426
Weight in kg Size Total length Cross-section mm
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1
Technical data Multi Check DC voltage 200mV ±0,5%, +3digits 2, 20, 200, 400V ±0,8%, +5digits AC voltage 2, 20V ±1,5%, +5digits 200, 400V ±1,5%, +5digits DC power 200μA, 2000μA ±1,0%, +3digits 4A ±1,2%, +5digits AC power 200μA, 2000μA ±1,3%, +5digits 4A ±1,5%, +8digits Resistance 200Ω ±1,0%, ±1,0%, +5digits 2k, 20k, 200kΩ ±1,0%, ±1,0%, +5digits 2MΩ ±1,0%, ±1,0%, +5digits 20MΩ ±1,8%, +5digits Diode test: Test power 0.6 mA Idle voltage type 1.5 V Throughput test: Signal sounds with resistance of <50 Ω No-contact voltage test: 100 - 600 V AC Maximum input voltage: 400 V AC/DC Input impedance: >7.5 MΩ, type 10 MΩ (ACV & DCV) Alternating current bandwidth: 50 to 400 Hz Automatic power off function: 15 minutes Overvoltage protection: CAT III 300 V Fuses: μA, mA range 0.2A/400V fl ink 4A range 4 A/400 V fl ink Voltage supply: 2 x 1.5 V Operating temperature range: 0° to +40°C (32° to 104°F) Storage temperature range: -10° to +50°C (14° to 122°F) LED torch: Ø 5 mm white high-performance LED TÜV / GS: IEC/EN 61010-1 Dimensions: 140 x 70 x 35 mm Weight: 250g including batteries Scope of delivery: 1x Operating instructions 1x Measuring cable 1x Carry bag 2x batteries 1.5V AAA, LR03 Guarantee: 3 years
Art. no. 103812
Contents Blade length Diameter in mm² Cutting strength
kg 0,433
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1
Circuit tester „Control”
Voltage testers VDE/GS
Continuity tester with LED torch lamp function, contactless voltage detector, and test leads. The tester comes with five professional functions for working with electrical wiring.
5 mm surounding hand-protection, clip of insulating material, fixed installed scale with dark background
Specifications: • optical continuity test low-ohm (0 - 20 Ω) • acoustical continuity test high-ohm (0 - 250 Ω) • high efficient LED torch lamp • contactless voltage detector • phase detector • IP44 shower water proof • CAT III 1000 V • approved and certificated TÜV/GS IEC/EN 61010-1 • 3 years warranty
Art. no. 100700
TMA 125-250
TL 190
kg 0,036
PU 1
Voltage tester „Basic“ surounding hand-protection, clip of insulating material, fixed installed scale with dark background
Art. no. 100666
kg 0,139
PU 1
Art. no. 102075
TMA 125-250
TL 190
kg 0,035
PU 1
Voltage tester “TestPen” Non-contact voltage testing above 12V AC with integrated high-power LED torch (Light duration up to 60 hours – per set of batteries). The TestPen is able to detect live wires using the switching circuit integrated in the probe. Specifications: • Voltage range: 12 – 1000V AC • Power supply: 2 x 1.5 V, type AAA Micro • Type of protection: IP 44 • Overvoltage category: CAT III 1000V • IEC/EN 61010-1 (DIN VDE 0411) • 3 years warranty
Art. no. 103814
TMA 12-1000
TL 140
Infrared thermometer Infrared thermometer The intended use includes the contact-free measurement of temperatures between –20 to +380°C. As power supply, only a 9V battery of the type 006P, IEC6F22, NEDA 1604 or one of the same type may be used. The thermometer may only be used in a dry environment and contact with moisture must be avoided.
kg 0,190
PU 1
Voltage tester “TestPen Basic” Contact-free voltage test from 110 Volt AC. The “TestPen Basic” is able to detect live cables using the tip that is integrated in the switching circuit. If an alternating voltage > 110 Volt AC is detected, the white cap illuminates in red. Current flow is not necessary!
Specifications: • Temperature range: -20 ~ +380°C (-4 ~ 716°F) • Response time: less than 1 second • Distance from measuring point ratio: 8 :1 • Spectral range: 5 ~ 14μm • Emission ratio: 0.95 hard • Temperature resolution: 0.1°C (0.1°F) • Laser: 1mW, wave length 630 ~ 670nm, class II • Working temperature: 0 ~ +50°C (32 ~ 122°F) • Storage temperature: -20 ~ +65°C (-4 ~ 149°F) • Air humidity: 10% ~ 90%, non-condensing • Power supply: 9V battery • Product size: 16.5 cm x 9 cm x 4 cm • Weight: 150 g (including battery) • 3 years guarantee
Technical data: • Voltage range: 110 – 1000 V AC • Power supply: 2 x 1,5 V Typ AAA Micro • Protection category: IP 44 • Excess voltage category: CAT III 1000V • IEC/EN 61010-1 (DIN VDE 0411) • 3 years guarantee
Art. no. 103818 Art. no. 103816
TMA 110-1000
TL 140
kg 0,190
kg 0,193
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
149
Allen keys, spanners 1000 V T-Handle socket wrenches 1000 V
Right angle allen keys 1000 V
chrome vanadium steel, full insulated, for hexagon nuts, DIN 7440, 2-coloured coating-insulation - inside yellow/outside red
chrome vanadium steel, for hexagon socket screws, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110000 110002 110004 110006 110008 110010 110012 110022 110024 110026 110028 110030 110032 110034 110036
WS 10 11 12 13 14 17 19 11 12 13 14 17 19 22 24
BL handle 200 160 200 160 200 160 200 160 200 160 200 160 200 160 300 160 300 160 300 160 300 160 300 160 300 160 300 160 300 160
kg 0,300 0,315 0,320 0,320 0,426 0,401 0,430 0,429 0,375 0,380 0,385 0,534 0,556 0,662 0,990
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Art. no. 110042 110044 110046 110048 110050 110052 110054
WS 3 4 5 6 8 10 12
kg 0,016 0,029 0,045 0,051 0,103 0,220 0,352
PU 1 1 1 1 1 1 1
T-handle allen keys 1000 V chrome vanadium steel, for screws with hexagon inserts, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Cross type socket wrenches 1000 V chrome vanadium steel, no contact with steel insert, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110060 110062 110064
WS 5 6 8
kg 0,222 0,227 0,224
PU 1 1 1
kg 0,021 0,020 0,032 0,035 0,035 0,044 0,064 0,061 0,084 0,121 0,140 0,215 0,242 0,338 0,390 0,503
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Single ended spanners 1000 V chrome vanadium steel, full insulated, offset at 15°, 2-coloured coating-insulation - inside yellow/outside red Art. no. 110070 110074 110076 110078 110080
WS 10-11-14-17 11-12-13-17 10-13-14-17 11-13-14-17 13-17-19-22
BL 200 200 200 200 200
kg 0,451 0,225 0,455 0,449 0,502
PU 1 1 1 1 1
Counter hold spanners 1000 V chrome vanadium steel (31 CrV 3), 2-coloured coating-insulation - inside yellow/ outside red
Art. no. 110081 110083 110084 110085 110087 110089 110091 110093 110095 110097 110099
150
kg Size TL Ø
WS 10 12 13 14 16 17 18 19 20 22 24
TL 200 200 200 250 260 270 265 270 275 275 270
Weight in kg Size Total length Cross-section mm
kg 0,118 0,120 0,140 0,150 0,249 0,255 0,250 0,275 0,300 0,300 0,350
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1 1 1 1 1 1 1 1 1 1 1
Art. no. 110260 110262 110264 110266 110268 110270 110272 110274 110276 110278 110280 110282 110284 110286 110288 110290
Contents Blade length Diameter in mm² Cutting strength
WS 6 7 8 9 10 11 12 13 14 17 19 22 24 27 30 32
Col. Mat. TMA WS
TL strength 75 3 80 3,5 85 3,5 100 4 120 5 130 5,5 140 5,5 155 6 170 6 185 6,5 210 7,5 230 8,5 250 9,5 290 11,5 345 13 350 15
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
Allen keys, spanners 1000 V Ring spanners 1000 V chrome vanadium steel, full insulated, offset at 75°, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110300 110302 110304 110306 110308 110310 110312 110314 110316 110318 110320 110322 110324
WS 6 7 8 9 10 11 12 13 14 17 19 22 24
TL 140 140 150 155 160 170 180 195 205 240 260 280 280
kg 0,061 0,066 0,084 0,066 0,092 0,089 0,130 0,132 0,147 0,233 0,236 0,345 0,357
PU 1 1 1 1 1 1 1 1 1 1 1 1 1
Ratchet ring spanners 1000 V full insulated, 2-coloured coating-insulation - inside yellow/outside red
72 sprockets Art. no. 110870 110872 110874 110876 110878 110880 110882 110884 110886 110888 110890 110892
WS 8 9 10 11 12 13 14 15 16 17 18 19
kg 0,032 0,040 0,050 0,059 0,065 0,076 0,086 0,105 0,130 0,161 0,179 0,215
PU 1 1 1 1 1 1 1 1 1 1 1 1
Adjustable wrenches to DIN 3117 A 1000 V steel forged, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110555 110556 110557
WS max. 26 31 36
TL 200 250 300
kg 0,325 0,512 0,809
PU 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
151
Reversible ratchets, torque wrenches, extensions Reversible ratchet 1000 V
Hexagon sockets 1000 V
full insulated, 2-coloured coating-insulation - inside yellow/outside red
fully insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110810
square 1/4"
TL 135
kg 0,122
PU 1
Torque wrench 1000 V reversible ratchet system, fully insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110820 110822 110824 110826 110828 110830 110832 110834 110836 110838
WS 5 6 7 8 9 10 11 12 13 14
square 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
TL 25 25 25 25 25 25 25 25 25 25
kg 0,012 0,012 0,014 0,011 0,016 0,014 0,020 0,021 0,021 0,034
PU 1 1 1 1 1 1 1 1 1 1
Inserts for hexagon socket screws 1000 V fully insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110812
square 1/4"
torque 2-12
TL 200
kg 0,250
PU 1 Art. no. 110840 110842 110844 110846 110848
Socket T-wrench 1000 V chrome vanadium steel, tempered, with locking device against accidental loosening of sockets or extensions, full insulated, 2-coloured coating-insulation - inside yellow/outside red
WS 3 4 5 6 8
square 1/4" 1/4" 1/4" 1/4" 1/4"
kg 0,010 0,014 0,014 0,015 0,021
PU 1 1 1 1 1
Handles with bit adapter 1000 V fully insulated, 2-coloured coating-insulation - inside yellow/outside red Art. no. 110818
square 1/4"
TL 115
kg 0,156
PU 1
Extensions with locking device against accidental loosening of sockets or extensions, full insulated, 2-coloured coating-insulation - inside yellow/outside red Art. no. 110864 110866 110868 Art. no. 110814 110816
square 1/4" 1/4"
TL 75 125
kg 0,043 0,054
PU 1 1
bit adapter 1/4" 1/4" 1/4"
square 1/4" 1/4" 1/4"
TL 120 160 250
kg 0,160 0,248 0,310
See page 186 for bits.
Extension fully insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110860
152
kg Size TL Ø
bit adapter 1/4"
Weight in kg Size Total length Cross-section mm
square 1/4"
CW L W No.
TL 40
Cutting width Length in mm Width mm Number
kg 0,023
Cont. BL mm² St.
PU 1
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1 1 1
Reversible ratchets, torque wrenches, extensions Reversible ratchet 1000 V
Fittings for hexagon socket screws 1000 V
full insulated, 2-coloured coating-insulation - inside yellow/outside red
3/8“ square drive, 4 edge drive, made of chrome vanadium steel, forged, oil hardened, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 220410
square 3/8"
TL 200
kg 0,300
PU 1
Socket T-wrench 1000 V
Art. no. 220434 220436 220438 220440
WS 4 5 6 8
square 3/8" 3/8" 3/8" 3/8"
TL 60,0 60,0 60,0 60,0
kg 0,036 0,040 0,041 0,042
PU 1 1 1 1
Tool case 1000 V
chrome vanadium steel, tempered, with locking device against accidental loosening of sockets or extensions, full insulated, 2-coloured coating-insulation - inside yellow/outside red
made of plastic, complete with 3/8“ tools. The plastic material used for socket sets is guaranteed to pass –40°c impact tests. This quarantee that the insulation value will not be compromised due to impact. Dimension: 286 x 255 x 54 mm. Contents: • Reversible ratchet 200 mm, 3/8“ • T-slip-on-keys 200 mm, 3/8“ • Extension 150 und 250 mm, 3/8“ • Sockets 3/8“, 8, 10, 12, 13, 14, 17, 19, 22 mm • Dies for hexagon srews 3/8“, 4, 5, 6, 8 mm
Art. no. 220412
square 3/8"
TL 200
kg 0,241
PU 1
Extensions with locking device against accidental loosening of sockets or extensions, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 220414 220416
square 3/8" 3/8"
TL 125 250
kg 0,150 0,250
PU 1 1
Art. no. 220402
16-pieces
square 3/8"
kg 2,500
PU 1
Hexagon sockets 1000 V 3/8“ square drive, 4 edge drive, full insulated, 2-coloured coating-insulation inside yellow/outside red
Art. no. 220418 220420 220422 220424 220426 220428 220430 220432
WS 8 10 12 13 14 17 19 22
square 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"
TL 44,5 44,5 44,5 44,5 44,5 44,5 46,0 46,0
kg 0,027 0,027 0,029 0,032 0,035 0,047 0,051 0,063
PU 1 1 1 1 1 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
153
Torque wrenche, extensions, hexagon sockets Reversible ratchet 1000 V
Extensions with bit adapter 1000 V
full insulated, 2-coloured coating-insulation - inside yellow/outside red
full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110331/EN
square 3/8"
TL 190
kg 0,402
PU 1
Art. no. 110861
bit adapter 1/4"
square 3/8"
TL 125
kg 0,137
PU 1
Hexagon sockets 1000 V Locked torque wrench 1000 V
3/8“ square drive, 4 edge drive, full insulated, 2-coloured coating-insulation inside yellow/outside red
reversible ratchet system, adjustable valve between 5-27 Nm, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 300310/EN
square 3/8"
torque 5-27
TL 280
kg 0,951
PU 1
Torque wrenches 1000 V reversible ratchet system, fully insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110363/EN 110364/EN 110365/EN 110366/EN 110367/EN 110368/EN 110369/EN 110371/EN 110700/EN 110702/EN
WS 8 9 10 11 13 17 19 14 12 22
square 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"
TL 40 40 40 40 40 40 40 40 40 40
kg 0,035 0,032 0,036 0,037 0,032 0,050 0,060 0,070 0,070 0,061
PU 1 1 1 1 1 1 1 1 1 1
Fittings for hexagon socket screws 1000 V 3/8“ square drive, 4 edge drive, made of chrome vanadium steel, forged, oil hardened, full insulated, 2-coloured coating-insulation - inside yellow/outside red Art. no. 110055/EN 110056/EN 110065/EN
square 3/8" 3/8" 3/8"
torque 5-25 5-25 5-50
TL 200 280 370
kg 0,350 0,920 1,194
PU 1 1 1 Art. no. 300302/EN 300296/EN 300298/EN 300299/EN 300305/EN
Socket T-wrench 1000 V chrome vanadium steel, tempered, with locking device against accidental loosening of sockets or extensions, full insulated, 2-coloured coating-insulation - inside yellow/outside red
WS 4 5 6 8 10
square 3/8" 3/8" 3/8" 3/8" 3/8"
TL 65 65 65 65 65
kg 0,068 0,065 0,068 0,070 0,082
PU 1 1 1 1 1
Torque stoppers 1000 V with short extension, locable for all sockets with 3/8“ drive, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110039/EN
WS 3/8"
BL handle 200 160
kg 0,369
PU 1 Art. no. 110456/EN 110457/EN 110458/EN
Extensions with locking device against accidental loosening of sockets or extensions, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110337/EN 110335/EN
154
kg Size TL Ø
square 3/8" 3/8"
TL 125 250
Weight in kg Size Total length Cross-section mm
kg 0,292 0,280
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
square 3/8" 3/8" 3/8"
torque -12 -18 -25
kg 0,220 0,220 0,224
PU 1 1
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1 1 1
Torque wrenche, extensions, hexagon sockets Reversible ratchet 1000 V
Fittings for hexagon socket screws 1000 V
full insulated, 2-coloured coating-insulation - inside yellow/outside red
3/8“ square drive, 4 edge drive, made of chrome vanadium steel, forged, oil hardened, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 220450
square 1/2"
TL 250
kg 0,550
PU 1
Art. no. 220486 220488 220490 220492 220494
WS 4 5 6 8 10
square 1/2" 1/2" 1/2" 1/2" 1/2"
TL 120,0 120,0 120,0 120,0 120,0
kg 0,113 0,113 0,113 0,115 0,134
PU 1 1 1 1 1
Socket T-wrench 1000 V chrome vanadium steel, tempered, with locking device against accidental loosening of sockets or extensions, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Tool case 1000 V made of plastic, complete with 1/2“ tools. The plastic material used for socket sets is guaranteed to pass –40°c impact tests. This quarantee that the insulation value will not be compromised due to impact. Dimension: 380 x 316 x 61 mm. Contents: • Reversible ratchet 250 mm, 1/2“ • T-slip-on-keys 200 mm, 1/2“ • Extension 125 und 250 mm, 1/2“ • Sockets 1/2“, 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 32 mm • Dies for hexagon srews 1/2“, 4, 5, 6, 8, 10 mm
Art. no. 220452
square 1/2"
TL 200
kg 0,330
PU 1
Extensions with locking device against accidental loosening of sockets or extensions, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 220454 220456
square 1/2" 1/2"
TL 125 250
kg 0,208 0,411
PU 1 1
Art. no. 220404
20-pieces
square 1/2"
kg 4,000
PU 1
Hexagon sockets 1000 V 3/8“ square drive, 4 edge drive, full insulated, 2-coloured coating-insulation inside yellow/outside red
Art. no. 220458 220460 220462 220464 220466 220468 220470 220478 220480 220482 220484
WS 10 11 12 13 14 17 19 22 24 27 32
square 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
TL 55,0 55,0 55,0 55,0 55,0 55,0 57,0 57,0 57,0 57,0 57,0
kg 0,055 0,055 0,058 0,058 0,061 0,069 0,072 0,087 0,095 0,125 0,170
PU 1 1 1 1 1 1 1 1 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
155
Torque wrenche, extensions, hexagon sockets Reversible ratchet 1000 V
Extensions with bit adapter 1000 V
full insulated, 2-coloured coating-insulation - inside yellow/outside red
full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110862 Art. no. 110332/EN
square 1/2"
TL 255
kg 0,687
PU 1
bit adapter 1/4"
square 1/2"
TL 250
kg 0,165
PU 1
Hexagon sockets 1/2“ square drive, 4 edge drive, full insulated, 2-coloured coating-insulation inside yellow/outside red
Locked torque wrench 1000 V reversible ratchet system, adjustable valve between 5-27 Nm, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 300312/EN
square 1/2"
torque 5-27
TL 280
kg 1,052
PU 1
Torque wrenches 1000 V reversible ratchet system, fully insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110339/EN 110340/EN 110342/EN 110344/EN 110346/EN 110348/EN 110350/EN 110352/EN 110354/EN 110356/EN 110358/EN 110360/EN 110362/EN
WS 8 10 11 12 13 14 17 19 22 24 27 30 32
square 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
TL 50 50 50 50 50 50 50 50 50 50 50 50 50
kg 0,080 0,056 0,062 0,062 0,066 0,063 0,076 0,072 0,104 0,141 0,191 0,224 0,268
PU 1 1 1 1 1 1 1 1 1 1 1 1 1
Hexagon sockets DIN 7448, extra long, 1000 V Art. no. 110058/EN 110066/EN 110067/EN 110068/EN
square torque 1/2" 2-50 1/2" 5-50 1/2" 20-100 1/2" 60-220
TL 280 370 460 530
kg 1,034 1,121 1,493 1,300
PU 1 1 1 1
extra long, 1/2“ square drive, 4 edge drive, full insulated, 2-coloured coatinginsulation - inside yellow/outside red
Art. no. 110373/EN 110374/EN 110375/EN 110376/EN 110377/EN 110378/EN 110379/EN
Socket T-wrench 1000 V chrome vanadium steel, tempered, with locking device against accidental loosening of sockets or extensions, full insulated, 2-coloured coating-insulation - inside yellow/outside red
WS 10 11 13 14 17 19 22
square 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
TL 80 80 80 80 80 80 80
kg 0,085 0,110 0,123 0,119 0,157 0,168 0,230
PU 1 1 1 1 1 1 1
Fittings for hexagon socket screws 1000 V Art. no. 110040/EN
WS 12,5
BL handle 200 160
kg 0,457
PU 1
1/2“ square drive, 4 edge drive, made of chrome vanadium steel, forged, oil hardened, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Extensions Art. no. 300294/EN 300297/EN 300295/EN 300303/EN 300306/EN
with locking device against accidental loosening of sockets or extensions, full insulated, 2-coloured coating-insulation - inside yellow/outside red
Art. no. 110336/EN 110338/EN
156
kg Size TL Ø
square 1/2" 1/2"
TL 125 250
Weight in kg Size Total length Cross-section mm
kg 0,197 0,389
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1 1
WS 4 5 6 8 10
square 1/2" 1/2" 1/2" 1/2" 1/2"
TL 70 70 70 70 70
kg 0,094 0,096 0,101 0,100 0,106
1000 V set of socket wrenches see Page 160.
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1 1 1 1 1
Safety tools Alignment tool, 3/8“ 1000 V
Electrician‘s safety levels
3/8“ drive, for the alignment of 3 or 4-wire sector conductors, made from impact-resistant plastic
nonconducting plastic material, with 2 tubes horizontal and vertical
Art. no. 110704 110705
size 95 - 150 mm² 185 - 240 mm²
kg 0,068 0,088
PU 1 1
Art. no. 240057 240058
TL 400 600
kg 0,188 0,274
PU 1 1
kg 0,570 0,825
PU 1 1
Holding device 1000 V PVC hammer 1000 V
For the easier handling of screwed connections when assembling coupling sleeves, variably adjustable
Art. no. 120103
TL 220
kg 0,424
Bounce-free, head of polyethylen, break-, wear- and splinter-proof, heads interchangeable
PU 1 Art. no. 180295 180297
Plastic wedges
TL 290 290
Ø 25 35
with bright slot for all common cable cutters, oval form without sharp edges
Combined dowel and contact spanners may be used for screws 2 - 63 A by changing the insert, handle made from insulating material Art. no. 120102
TL 22,5
width 4,5
kg 0,234
PU 1 Art. no. 120002
Wedges
TL 105
kg 0,046
PU 1
kg 0,029
PU 1
kg 0,031
PU 1
kg 0,042
PU 1
without slot, oval form without sharp edges, long version with large head
Insulated tweezers VDE 1000 V austenitic steel, pointed, PVC-insulated
Art. no. 120100
TL 20
width 2,5
kg 0,085
PU 1 Art. no. 211060
TL 130
pointed
Wedges wood or plastic, dimension: 16.3 x 3.7 mm
Insulated tweezers VDE 1000 V austenitic steel, pointed round, bent, PVC-insulated
Art. no. 120094 120097 120098 120099
size 1 2 1 2
type without with without with
material plastic plastic wood wood
kg 0,051 0,074 0,043 0,043
PU 1 1 1 1
Art. no. 211062
TL 150
pointed round, bent,
Cleaning brushes Safety Line
Insulated tweezers VDE 1000 V
PVC-pattern
austenitic steel, wide round, flat, PVC-insulated
Art. no. 150036 150037 150038
TL 420 420 420
width 25 28 50
kg 0,053 0,061 0,100
PU 1 1 1
Art. no. 211064
TL 145
wide round, flat,
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
157
Routine tests Safety advice for working with live voltage The basic requirements for working with live voltage are safety-insulated tools. Legal regulations and the following safety advice should always be observed: 1. Transport your safety tools such that damage to the insulation is avoided. 2. Before use, make sure that the insulation is not damaged. Damaged tools must not be used. 3. Keep your safety tools clean and dry. 4. When working overhead or when using cutting pliers, protective glasses must be worn. 5. For your own safety, keep your work space clean and tidy when working with live voltage. 6. In enclosed, cramped spaces, protective clothing and equipment must be worn (e.g. safety gloves, covering drapes, protective hoods) 7. Only use suitable and tested tools. Make sure that loose and cut off parts do not fall onto live components.
Routine tests in accordance with VDE Norm 1000 V IEC 60900:2004 Cold-heading test In this test, the toughness of the PVC material is checked by dropping a weight onto the tools which have been cooled down to -25°C. The tools must not show any cracking or other damage after the test.
Flame resistance test To exclude any fire risks, only flame-proof PVC material is used.
Testing the insulating properties After storing the tools under water for 24 hours, the tools are tested using 10,000 V AC for three minutes, while simultaneously measuring the discharge current. During this time, no puncture or sparkover must occur.
Testing the adhesive strength of the PVC coating After pliers have been stored for 168 hours at +70°C, the adhesive power of the PVC coating is tested using a pulling force of 500 Nm. The insulation material must stay firmly attached to the basic tool.
Pressure test No puncture must occur, while testing the tool with a voltage of 5,000 V AC when also applying a pressure of 20 Nm at a temperature of +70°C to the tool.
Voltage test Each safety tool is individually voltage tested. This means that all tools which bear the relevant mark have been tested at 10,000 V AC and are approved for a voltage of 1,000 V, ensuring 10-fold safety.
Patent ratchet wrench Screw profiles Slot Cross slot Phillips Cross slot Pozidriv
The HAUPA ratchet wrench has a number of patented advantages. it is characterised particularly ergonomic handling and high functional safety. The excellent interlocking of the wrench insert, which must be able to withstand pull-out forces of up to 500 N is the main feature. The ratchet can be operated with one hand due to a cross slide made from non-conducting material (polyamide). It is ergonomically designed such that it accessible with the thumb of the hand holding it. This cross slide, which is deep in the inside of the ratchet, also ensures that the testing voltage of 10 KV gema DIN 60900 can easily be achieved.
Pozidriv/flat slot Tx Tx with safety pin Allen screw Hexagon head Ball point
158
Safety of HAUPA products All HAUPA products under the product area of "working with live voltage" have a 2-colour multi-layer insulation (wherever technically possible). This multi-layer insulation supports the current VBG4 regulations. This regulation requires that before use all tools are tested for any damage that can be seen externally. The 2-colourcoating – the second insulating layer contrast in yellow – ensures that any damages are visible immediately.
Working under tension
1000 V Tool cases
...convincing solutions
Tool cases 1000 V Tool case 1000 V
Tool case „Biber“ 1000 V
made of plastic, complete with 3/8“ tools. Dimension: 450 x 340 x 100 mm.
made of plastic, complete with 26 security tools. Dimension: 450 x 340 x 100 mm.
Contents: • Reversible ratchet 3/8“ • Extension 125 mm, 3/8“ • Extension 250 mm, 3/8“ • T-slip-on-keys 3/8“ • Sockets 3/8“ (10, 12, 13, 14, 17, 19, 22, 24 mm) • Dies for hexagon srews 3/8“, 5, 6, 8 mm • Torque stopper (12 to 25 Nm) • 2C-VDE screwdriver 3,5 x 100 mm
Contents: • 2C-VDE electrician‘s screwdrivers 4 x 100, 5,5 x 125, 6,5 x 150, 8 x 175 mm • VDE combination pliers 205 mm • VDE side cutters 185 mm • VDE telephone pliers, straight, 200 mm • Reversible ratchet 1/2“ • Extension 250 mm, 1/2“ • Hexagon sockets 1/2“, 10, 11, 12, 13, 14, 17, 19 mm • Open end spanners 10, 11, 12, 13, 14, 17, 19 mm • 2-pole voltage tester • Cable knife • Cable stripping knife
with locking system
with locking system Art. no. 220147
17-pieces
square 3/8"
kg 3,400
PU 1
Tool case 1000 V made of plastic, complete with 1/2“ tools. Dimension: 450 x 340 x 100 mm. Contents: • Reversible ratchet 1/2“ • Extension 125 mm, 1/2“ • Extension 250 mm, 1/2“ • Slip-on-keys 1/2“ • Hexagon sockets 1/2“, 10, 12, 13, 14, 17, 19, 22, 24 mm • Dies for hexagon srews 1/2“, 5, 6, 8 mm • 2C-VDE screwdriver 3,5 x 100 mm
Art. no. 220146
16-pieces
square 1/2"
kg 5,000
PU 1
Tool case „Real“ 1000 V made of plastic, complete with 20 security tools. Dimension: 450 x 340 x 100 mm.
with locking system
Art. no. 220205/EN
26-pieces
square 1/2"
kg 4,080
PU 1
Contents: • 2C-VDE electrician‘s screwdrivers 2,5 x 75, 4 x 100, 6,5 x 150, 8 x 175 • 2C-VDE cross slotted screwdrivers PH, size 0, 1, 2 • VDE combination pliers 205 mm • VDE side cutters 185 mm • VDE telephone pliers, straight 200 mm • VDE wire stripping pliers 160 mm • VDE flat nose pliers 160 mm • VDE round nose pliers 160 mm • 2C-VDE socket wrenches 5, 8, 10, 13 mm • Cable knife • Cable stripping knife • 2-pole voltage teste
Tool case 1000 V made of plastic, complete with 3/8“ tools. Dimension: 400 x 290 x 110 mm. Contents: • Reversible ratchet 3/8“ • Extension 125 mm, 3/8“ • Extension 250 mm, 3/8“ • T-slip-on-keys 3/8“ • Sockets 3/8“, 8, 10, 13, 17, 19 mm • Dies for hexagon srews 3/8“, 4, 5, 6, 8 mm Art. no. 220148
without locking system
Art. no. 220212
160
kg Size TL Ø
13-pieces
Weight in kg Size Total length Cross-section mm
square 3/8"
CW L W No.
kg 2,500
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
kg 4,300
20-pieces
PU 1
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1
Tool cases 1000 V Tool case 1000 V
HAUPA „Vario Plus“ 1000V replaceable blade system
made of plastic, complete with 3/8“ tools. The plastic material used for socket sets is guaranteed to pass –40°c impact tests. This quarantee that the insulation value will not be compromised due to impact. Dimension: 286 x 255 x 54 mm.
The „Vario Plus“ replaceable blade system with insulated replaceable blades, switching cabinet key is integrated into the system, VDE pliers set and voltage tester. All screwdrivers aretested individually (IEC 60900:2004) and ensure you are able to work safely up to 1000 V and provides the blades with a secure hold in the approved 2-component handle. Ideal for all servicetechnicians as the blade selection can be expanded to cover yourindividual requirements.
Contents: • Reversible ratchet 200 mm, 3/8“ • T-slip-on-keys 200 mm, 3/8“ • Extension 150 und 250 mm, 3/8“ • Sockets 3/8“, 8, 10, 12, 13, 14, 17, 19, 22 mm • Dies for hexagon srews 3/8“, 4, 5, 6, 8 mm
Art. no. 220402
16-pieces
square 3/8"
Contents: • Slot: 0,4 x 2,5 x 100; 0,5 x 3,0 x 100; 0,6 x 3,5 x 100; 0,8 x 4,0 x 100; 1,0 x 5,5 x 100; 1,2 x 6,5 x 100 • Phillips: 0 x 100, 1 x 100, 2 x 100 • Pozidriv: 0 x 100, 1 x 100, 2 x 100 • Tx: 8 x 100, 9 x 100, 10 x 100, 15 x 100, 20 x 100, 25 x 100, 30 x 100 • Square: 8 x 47 • Double-bit: 5,3 x 47 • Screw cap, additional screw cap when using as precision tool (electronics) • 2-component exchangeable handle: 120 mm • Voltage testers VDE/GS: 100700, 125 - 250 V • VDE 2C pliers: 211200, 211204, 211208, 211210
kg 2,500
PU 1
Tool case 1000 V made of plastic, complete with 1/2“ tools. The plastic material used for socket sets is guaranteed to pass –40°c impact tests. This quarantee that the insulation value will not be compromised due to impact. Dimension: 380 x 316 x 61 mm. Art. no. 102050
Contents: • Reversible ratchet 250 mm, 1/2“ • T-slip-on-keys 200 mm, 1/2“ • Extension 125 und 250 mm, 1/2“ • Sockets 1/2“, 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 32 mm • Dies for hexagon srews 1/2“, 4, 5, 6, 8, 10 mm
Art. no. 220404
20-pieces
square 1/2"
kg 4,000
28-pieces
width 270
depth 80
height 270
kg 2,483
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
161
Leather tool cases HAUPA “Kick-Off”
HAUPA “Kick-Off Light“
Solid Nylon tool case for the trainee – with 20 tools.
Solid Nylon tool case for the trainee – with 10 tools.
Contents: • 2C-VDE telephone pliers, 200mm • 2C-VDE combination pliers, 180mm • 2C-VDE side cutters, 160mm • 2C-VDE wire stripping pliers, 160mm • 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150mm • 2C-VDE cross slotted screwdrivers PH, size 1+2 • Cable knife, 1-piece • PUK pocket saw, fixed handle • Brush • Electricians’ chisel, 10 x 250mm • VDE/GS Voltage tester, blade 50 mm, 100 – 250 V • Stone chisel, 250mm • Engineers’ hammer, 300 g • Double-face sledge hammer, 1000 g • Spatula, 40mm • Plaster container
Contents: • 2C-VDE telephone pliers, 200mm • 2C-VDE combination pliers, 180mm • 2C-VDE side cutters, 160mm • 2C-VDE wire stripping pliers, 160mm • 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150mm • 2C-VDE cross slotted screwdrivers PH, size 1+2
Art. no. 220575 Art. no. 220574
empty 220573
20-pieces
kg 7,650
PU 1
10-pieces
empty 220573
kg 5,200
PU 1
Tool case „Delux“ 1000 V of signal-red leather, with 54 safety tools, case 22 01 42 containing: Contents: • VDE telephone pliers, straight, 200 mm • VDE telephone pliers, bent, 200 mm • VDE combination pliers 185 mm • VDE side cutters 165 mm • VDE wire stripping pliers 160 mm • 2C-VDE electrician‘s screwdriver 2,5 x 75, 4 x 100, 5,5 x 125, 6,5 x 150 mm • 2C-VDE cross slotted screwdriver PH, size 1 + 2 • Socket wrenches 5,5, 7,0, 8,0, 10,0 mm • Voltage tester „Profi“ • Hexagon sockets 10, 11, 12, 13, 14, 15, 16 • Reversible ratchet 1/2“ • T-sliding handle 1/2“ • Open end spanners 10, 12, 13, 19, 22, 24 • Cable knive • Cable scissor 200 mm • Slip-on bushes 5-pieces No. 1, 10 mm • Slip-on bushes 5-pieces No. 2, 10 mm • Slip-on bushes 5-pieces No. 3, 10 mm • Plastic pliers 180 mm • Plastic clamp • Covering tape, grey • Covering tape, red • Safety grip • Gloves size 9
Tool case „Start VDE“ Tool case for apprentices, made from black coloured cowhide equipped with 20 tools, case 22 00 60. Contents: • 2C-VDE telephone pliers, 200 mm • 2C-VDE combination pliers, 180 mm • 2C-VDE cutters, 160 mm • 2C-VDE wire stripping pliers, 160 mm • 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm • 2C-VDE cross slotted screwdrivers PH, size 1 + 2 • Cable knife, 1 blade • Electricians’ chisel, 10 x 250 mm • VDE/GS Voltage tester - blade 50 mm • PUK pocket saw, fixed handle • Brush • Stone chisel, 300 mm • Engineers’ hammer, 300 g • Double-face sledge hammer, 1000 g • Spatula, 40 mm • Plaster container
162
Art. no. 220168/VDE
21-pieces
kg Size TL Ø
Weight in kg Size Total length Cross-section mm
empty 220060
CW L W No.
kg 6,700
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1
Art. no. 220135
Contents Blade length Diameter in mm² Cutting strength
54-pieces
Col. Mat. TMA WS
empty 220142
Colour Material Tested/Measured area Wrench size
kg 9,460
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1
Tool cases 1000 V Tool case „Rotor“ 1000 V
Tool case “Start-up VDE”
of signal-red leather, with 46 safety tools, case 22 01 42 containing:
Hard-top case, black, 2 tool kits, document pocket with hook-and-loop fixing, combination lock, bottom half of case equipped with variable partitions, shoulder strap, 19 tools.
Contents: • VDE combination pliers 185 mm • VDE side cutters 165 mm • VDE wire stripping pliers • VDE round nose pliers 160 mm • Plastic clamp • Gloves, size 10 • 2C-VDE electrician‘s screwdrivers 2,5 x 75, 4 x 100 mm • Safety grip • Socket wrenches, size 6, 7, 8, 9 • Rubber towels 1000 mm • 5 slip-on-bushes size 1, 10 mm • 5 slip-on-bushes size 2, 10 mm • 5 slip-on-bushes size 3, 10 mm • 5 slip-on-bushes 10 mm • 5 slip-on-bushes 20 mm • 5 slip-on-bushes 30 mm • Cable knives • Voltage tester 150 - 250 V
Art. no. 220140
46-pieces
empty 220142
Contents: • 2C-VDE electrician‘s screwdrivers 2,5 x 75, 4 x 100, 5,5 x 125 und 6,5 x 150 mm • 2C-VDE cross slotted screwdrivers, PH, size 1 + 2 • 2C-VDE combination pliers 185 mm • 2C-VDE side cutters 165 mm • 2C-VDE telephone pliers 200 mm • 2C-VDE wire stripping pliers 160 mm • Wire stripper, hooked blade, 8 - 28 mm Ø • Cable knife, 1-pieces • Engineers’ hammer, 300 g • PUK pocket saw, fixed handle • Electricians’ chisel, 10 x 250 mm • Paint scraper, 40 mm • Voltage tester, blade 50 mm • Measuring tape, • Water brushes
kg 6,400
PU 1
Art. no. 220235
kg 9,300
PU 1
hard-side case, black, 2 tool sections (one with document pocket), bottom half of case equipped with variable partitions, with high-grade fittings, 19 tools. Case 22 00 38.
rigid case, signal-red, with high-grade fittings, complete with 54 safety tools. Case 22 00 76. Contents: • 2C-VDE electrician‘s screwdriver 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm • 2C-VDE cross slotted screwdriver PH, size 1 + 2 • VDE telephone pliers, straight, 200 mm • VDE telephone pliers, bent, 200 mm • VDE combination pliers 185 mm • VDE side cutters 165 mm • VDE wire stripping pliers 160 mm • Socket wrenches 5.5, 7, 8, 10 mm • Voltage tester „Profi“ • Hexagon sockets 10, 11, 12, 13, 14, 15, 16 • Reversible ratchet 1/2“ • T-sliding handle 1/2“ • Open end spanners 10, 12, 13, 19, 22, 24 • Cable knife • Cable scissors 200 mm • Slip-on bushes 5-pieces No. 1, 10 mm • Slip-on bushes 5-pieces No. 2, 10 mm • Slip-on bushes 5-pieces No. 3, 10 mm • Plastic pliers 180 mm • Plastic clamp • Covering tape, grey • Covering tape, red • Safety grip • Gloves size 9
Contents: • 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm • 2-VDE cross slotted screwdrivers PH, size 1 + 2 • 2C-VDE combinations pliers, 185 mm • 2C-VDE side cutters 165, mm • 2C-VDE telephone pliers, straight, 200 mm • 2C-VDE cable cutter 200 mm • Wire stripper, hooked blade, 8 - 28 mm Ø • Cable knife, 1 blade • Engineers’ hammer, 300 g • PUK pocket saw, fixed handle • Electricians’ chisel, 10 x 250 mm • Voltage tester blade, 50 mm • Measuring stick, 2 m • Paint scraper, 40 mm • Water brushes
Art. no. 220244
54-pieces
empty 220031
Tool case „Basic VDE“
Tool case „Delux Plus“ 1000 V
Art. no. 220239
19-pieces
empty 220076
kg 11,780
19-pieces
empty 220038
kg 7,140
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
163
Tool cases 1000 V Tool case „Power Pack“
Tool case „Leopard“
rigid case, signal red, with Alu frame and 2 locks, 3 plates with many compartements for tools, case 22 00 76 (460 x 180 x 310 mm).
rigid case, signal-red, complete with 32 safety tools (460 x 180 x 310 mm). Contents: • 2C-VDE electrician’s screwdrivers 2,5 x 75, 4 x 100, 6,5 x 150, 8,0 x 175, 10,0 x 200 mm • 2C-VDE cross slotted screwdrivers PH, size 1 + 2 • 2C-VDE cross slotted screwdrivers PZ, size 1 + 2 • Retaining screwdrivers 100, 125 mm • Retaining screwdriver, cross-slotted • Right angle allen keys, 6, 8 mm • VDE round nose pliers, 160 mm • VDE telephone pliers, straight, 200 mm • VDE telephone pliers, bent, 200 mm • VDE combination pliers 185 mm • VDE wire stripping pliers 160 mm • VDE side cutter, 165 mm • Socket wrenches 5,5, 6, 7, 8 mm • Voltage Tester „Profi“ • Cable knife, insulated • Cable knife • Cable scissor • Plastic pliers 180 mm • Covering tape, red 10 m • NH-safe
Contents: • 2C-VDE electrician‘s screwdrivers 2,5 x 75, 4 x 100, 5,5 x 125 und 6,5 x 150 mm • 2C-VDE cross slotted screwdrivers PH, size 1 + 2 • 2C-VDE screwdrivers PZ/FL, size 1 + 2 • 2C-VDE combination pliers 185 mm • 2C-VDE diagonal cutter 165 mm • 2C-VDE telephone pliers 200 mm • 2C-VDE cable cutter 200 mm • 2C-VDE water pump pliers 240 mm • VDE cable knive, straight blade, 50 mm • Safety glasses „PRO“ • Automatic wire stripper 0,2 - 6 mm² • Voltage tester „TestPen“ • Voltage tester „Profi“ • Finger gloves, size 9 • Ear protection plugs • NH-safety fuse grip
Art. no. 220303
empty 220076
21-pieces
kg 8,680
PU 1
Contents: • VDE round nose pliers 160 mm • VDE telephone pliers, straight, 200 mm • VDE telephone pliers, bent, 200 mm • VDE combination pliers 185 mm • VDE side cutter 165 mm • VDE wire stripping pliers 160 mm • Retaining screwdrivers 100, 125 mm • Retaining screwdriver cross-slotted • Right angle allen keys, 6, 8 mm • Electrician’s screwdrivers 75, 100, 150, 175, 200 mm • Cross slotted screwdriver, PH size 1 + 2 • Cross slotted screwdriver, PZ No. 1 + 2 • 2C-VDE socket wrenches 5,5, 6, 7, 8 mm • Voltage tester ”Profi” • Cable knife, insulated • Cable knife • Cable scissor • Plastic pliers 180 mm • Self adhesive PVC tape, red, 10 m • NH-Safety grip • Finger gloves, size 9
164
kg Size TL Ø
Weight in kg Size Total length Cross-section mm
empty 220032
CW L W No.
empty 220076
kg 9,400
PU 1
Hard-top case, black, 2 tool kits, document pocket with hook-and-loop fixing, combination lock, bottom half of case equipped with variable partitions, shoulder strap, 38 tools.
rigid case, signal-red, complete with 32 safety-tools. (460 x 180 x 310 mm).
32-pieces
32-pieces
Tool case „Profi VDE“
Tool case „Venus Plus“ 1000 V
Art. no. 220033
Art. no. 220136
Contents: • 2C-VDE electrician’s screwdrivers 2,5 x 75, 3 x 100, 6,5 x 150, 8 x 175 mm • 2C-VDE socket wrenches, size 5,5, 7, 8, 10 • 2C-VDE cross slotted screwdrivers, PH 1 + 2 • VDE long chain nose pliers, straight, 200 mm • VDE combination pliers 185 mm • VDE heavy duty side cutters 200 mm • VDE wire stripping pliers 160 mm • VDE cable cutter, max. 15 mm • Cable knives, 1000 V, 50 mm • Finger gloves, size 9 • NH-safety fuse grip • Rubber towels, 1000 x 1000 x 1,6 mm • Plastic clips, 160 mm • Slip on bushes, No. 1, 2, 3 (each 5 x) • Self adhesive PVC tape, red, 10 m • Heat protection gloves • Safety glasses
kg 10,160
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1
Art. no. 220232
Contents Blade length Diameter in mm² Cutting strength
35-pieces
Col. Mat. TMA WS
empty 220031
Colour Material Tested/Measured area Wrench size
kg 12,920
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1
Tool cases 1000 V Tool case trolly „Master“ 1000 V
Tool case trolly „EXTRA“
hard-side case, black, 2 tool sections, document pocket, combination lock, bottom half of case equipped with variable partitions, with high-grade fittings, 2 locks, 38 tools, case art. 22 00 23.
hard-side case, black, 2 tool sections, document pocket, combination lock, bottom half of case equipped with variable partitions, with high-grade fittings, 2 locks, 19 tools, case 22 00 23.
Contents: • 2C-VDE-screwdrivers set PH • VDE-Cable knive straight blade • Industrial cleaning wipes • Measuring tape 3 m • PUK pocket saw, fixed handle • VDE cable cutter 230 mm • 2C-VDE combination pliers 185 mm • VDE side cutters 165 mm • VDE telephone pliers 45°, 200 mm • Automatic wire stripper 0,2 - 6 mm² • Ear protection plugs SNR 30 db • 2C-VDE screwdrivers PZ/FL, size 1 • 2C-VDE screwdrivers PZ/FL, size 2 • Perlon fish tapes 15 mm, 3 • LED Pocket lamp 18 x 91mm 80 lm • Universal stripper 0,2 - 4 mm² • Wire stripper, hooked blade, 8 - 28 mm Ø • Crimping pliers for crimp terminals/end sleeves • Cable cutter 160 mm, coating-insulated • Crimping pliers 0,75 - 16 mm² • Ratched screwdriver „Flex“, 58 pcs. • Safety glasses • Spanner for switch-cabinets • Voltage tester „Profi Plus“ • Elektronik ESD Electronic side cutter 115 mm • Adjustable single-head wrench 24 mm • 2C Allround soft-grip scissors 140 mm • Cable glands IP 68, M20, light-grey • Dispenser box with insulated end sleeves (DIN) • Cable ties UV-resistant 250 x 4,8 mm • Nailing clips for round cable 7-10, white
Contents: • 2C-VDE screwdriver set PZ, 101999/PZ • 2C-VDE cross slotted screwdrivers PH, size 1 • 2C-VDE cross slotted screwdrivers PH, size 2 • Automatic wire stripper Super Plus 0,2-6 mm² • Cable stripping knives without hook blade 8-28 mm² • Voltagetester „Basic“ black • Combination pliers VDE 185 mm • Heavy duty diagonal cutters VDE 205 mm • Long chain nose pliers VDE angled 200 mm • Carpenters‘ pencils • Engineers‘ hammers 300 g • Electricians’ chisels 10x250 mm • Hand saws „PUK“ mit fixed handle • Torped-level 225 mm • Folding rules 2 m • Paint scrapers 40 mm • Water brushes • Plaster cups • Cable knives 1000 V, 50 mm • Siedge hammers 1000 g • Stone chisels, flat oval shank 28x250 mm • Industrial cleaning wipes • Crimping pliers crimping pliers for insulated terminals and end sleeves 0,5 - 6 mm • Stripper 8-13 mm² • Cable cutters VDE 170 mm • Electrical insulating tape VDE 15 mm x 10 m, Rainbow pack, 263820, 10 coulors • Voltage tester „Profi plus“ • HAUPA „Multi Check“ digital high-capacity multimeter
Art. no. 220307 Art. no. 220254
38-pieces
empty 220023
kg 14,700
33-pieces
empty 220023
kg 8,680
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
165
Tool cases 1000 V Tool case „EXTRA“
Tool case trolly „Start up“ 1000 V
hard-side case, black, 2 tool sections, document pocket, combination lock, bottom half of case equipped with variable partitions, with high-grade fittings, 2 locks, 19 tools, case 22 00 31.
hard-side case, black, 2 tool sections, document pocket, combination lock, bottom half of case equipped with variable partitions, with high-grade fittings, 2 locks, 19 tools, case art. 22 00 23.
Contents: • 2C-VDE screwdriver set PZ, 101999/PZ • 2C-VDE cross slotted screwdrivers PH, size 1 • 2C-VDE cross slotted screwdrivers PH, size 2 • Automatic wire stripper Super Plus 0,2-6 mm² • Cable stripping knives without hook blade 8-28 mm² • Voltagetester „Basic“ black • Combination pliers VDE 185 mm • Heavy duty diagonal cutters VDE 205 mm • Long chain nose pliers VDE angled 200 mm • Carpenters‘ pencils • Engineers‘ hammers 300 g • Electricians’ chisels 10x250 mm • Hand saws „PUK“ mit fixed handle • Torped-level 225 mm • Folding rules 2 m • Paint scrapers 40 mm • Water brushes • Plaster cups • Cable knives 1000 V, 50 mm • Siedge hammers 1000 g • Stone chisels, flat oval shank 28x250 mm • Industrial cleaning wipes • Crimping pliers crimping pliers for insulated terminals and end sleeves 0,5 - 6 mm • Stripper 8-13 mm² • Cable cutters VDE 170 mm • Electrical insulating tape VDE 15 mm x 10 m, Rainbow pack, 263820, 10 coulors • Voltage tester „Profi plus“ • HAUPA „Multi Check“ digital high-capacity multimeter
Content • 2C-VDE electricians’ screwdrivers 2,5 x 75, 4 x 100, 5,5 x 125, 6,5 x 150 mm • 2C-VDE cross slotted screwdrivers PH, size 1 + 2 • 2C-VDE combination pliers, 185 mm • 2C-VDE side cutters, 165 mm • 2C-VDE telephone pliers, 200 mm • 2C-VDE wire stripping pliers, 160 mm • Wire stripper, hooked blade, 8 - 28 mm Ø • Cable knife, 1 blade • Engineers’ hammer, 300 g • PUK pocket saw, fixed handle • Electricians’ chisel, 10 x 250 mm • Paint scraper, 40 mm • Voltage tester, blade 50 mm • Measuring tape, 3 m • Water brushes
Art. no. 220252
Art. no. 220309
166
kg Size TL Ø
empty 220031
33-pieces
Weight in kg Size Total length Cross-section mm
CW L W No.
kg 8,680
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
19-pieces
empty 220023
kg 10,940
PU 1
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1
Tool cases 1000 V Tool case „HAUPA – Lifesaver“ 1000 V Aluminium case, equipped with 54 safety tools. Size: 830 mm x 550 mm x 300 mm, weight: 37 kilos. Contents: • 2C-VDE socket wrenches 5, 5,5, 7, 8, 10, 11, 13 mm • Voltage-Tester • 2C-VDE electrician’s screwdrivers 2,5 x 75, 3 x 100, 4 x 100, 5,5 x 125, 6,5 x 150 mm • 2C-VDE cross-slotted-screwdrivers PH, size 1, 2 • 2C-VDE cross-slotted-screwdrivers PZ, size 0, 1, 2 • VDE right angle-allen key 3 • VDE right angle-allen key 4 • VDE right angle-allen key 5 • VDE right angle-allen key 6 • VDE right angle-allen key 8 • VDE right angle-allen key 10 • VDE right angle-allen key 12 • VDE open-End Spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30 32 • spanner for switch-cabinets • finger gloves, size 10 • VDE safety face mask • VDE safety grip • VDE electricans boots, size 42 • VDE insulating floor mat • VDE rubber towels 600 mm • VDE plastic clip 160 mm (2-pieces) • Slip-on busches 10 mm (4-pieces) • Safety belt 1400 mm • Fallstop-breaking device and rope shortening 2 m • VDE knife with strong blade • VDE cable cutter 200 mm • VDE combination pliers 185 mm • VDE side cutter 185 mm • VDE long chain nose pliers 200 mm • VDE wire stripping pliers 160 mm • VDE tweezer, pointed round 150 mm • Fall breaking belt typ A
Art. no. 220400 220079
54-pieces empty
width 830 830
height 550 550
depth 300 300
kg 37,0 18,6
PU 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
167
Tool cases
Tool sets 1000 V
Tool case „Venus“
Single ended tool set acc. to VDE 1000 V
rigid case, made of ABS-plastic material, signal-red, empty, suitable especially for safety-tools, excellent rib-profile on the outside, high-quality locks, inside with separation for documents, 2 plates with compartments for several tools, 1 tray of ABS-plastics with separations for individual divisions.
in tool wallet of black imitation leather. Contents: 8 single ended tools of chrom vanadium steel, offset at 15°, 2-coloured coating-insulation - inside yellow/ outside red. Contents: • Size of key 10, 11, 12, 13, 14, 17, 19, 22
Art. no. 220017
empty 220002
8-pieces
kg 1,181
PU 1
VDE security set 1000 V Bag of imitation leather, for working under tension up to 1000 V. 10-pieces Art. no. 220032
width 460
depth 180
height 310
kg 5,240
PU 1
Tool case „Pendant“ rigid case, signal red, with Alu frame and 2 locks, with 3 plates with many compartements for tools
Contents: • 2C-VDE electricians screwdrivers 2,5 x 75, 4 x 100, 5,5 x 125, 6,5 x 150 mm • 2C-VDE cross slotted screwdrivers PZ, size 1 + 2 • 2C-VDE combination pliers VDE 185 mm • 2C-VDE side cutters 185 mm • Voltage tester “Basic” • Cable stripping knife, 35 mm
Art. no. 220014
empty 220004
10-pieces
kg 1,688
PU 1
kg 2,216 0,814
PU 1 1
VDE/GS - Tool sets 1000 V in red coloured plastic wallet, 11-pieces. Art. no. 220076
width 460
depth 180
height 310
kg 5,107
PU 1
kg 2,700
PU 1
Tool case „Magister“ of signal-red leather, with many compartements for tools, empty
Art. no. 220142
width 440
depth 165
height 260
Contents: • 2C-VDE electricians screwdrivers 75, 100, 125, 150 mm • 2C-VDE cross slotted screwdrivers PZ, size 1 • VDE combination pliers 185 mm • VDE round nose pliers 160 mm • VDE side cutters 165 mm • VDE wire stripping pliers 160 mm • 2C-VDE socket wrench 7 mm • VDE/GS voltage tester
Art. no. 220130 220016
168
kg Size TL Ø
Weight in kg Size Total length Cross-section mm
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
Contents Blade length Diameter in mm² Cutting strength
11-pieces empty
Col. Mat. TMA WS
width 300 300
height 230 230
Colour Material Tested/Measured area Wrench size
depth 50 50
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
Backpacks Backpack „VDE“
Backpack „VDE Plus“
Tool backpack not only for the trainee, base shell rubber reinforced, double cross seam for high load.
Tool backpack not only for the trainee, base shell rubber reinforced, double cross seam for high load.
Contents: • 2C-VDE-Electricians’ screwdriver set, 6 pcs. • 2C-VDE-Cable cutters 200 mm • 2C-VDE-Telephone pliers straight, 200 mm • 2C-VDE-Combination pliers 185 mm • 2C-VDE-Side cutters 165 mm
Contents: • 2C-VDE-Cable cutters 200 mm • 2C-VDE-Telephone pliers straight, 200 mm • 2C-VDE-Wire stripping pliers 160 mm • VDE-Cable knife, straight blade, 50 mm • 2C-VDE-Combination pliers 185 mm • 2C-VDE-Side cutters 165 mm • 2C-Replaceable blade system „Vario“, 1000 V, 10 pcs. • Voltage tester „Profi“ 12-690 V • Test Pen „Basic“ • NH-safety fuse grip • Electricians‘ protection helmet • Safety-face mask
Art. no. 220279
10-pieces
empty 220275
kg 4,200
PU 1
Backpack „Basic VDE“ Tool backpack not only for the trainee, base shell rubber reinforced, double cross seam for high load. Backpack 22 02 75. Contents: • 2C-VDE electricians’ screwdrivers 2,5 x 75, 4 x 100, 5,5 x 125, 6,5 x 150 mm • 2C-VDE cross slotted screwdrivers PH, size 1 + 2 • 2C-VDE combination pliers, 185 mm • 2C-VDE side cutters, 165 mm • 2C-VDE telephone pliers, 200 mm • 2C-VDE wire stripping pliers, 160 mm • Wire stripper, hooked blade, 8 - 28 mm Ø • Cable knife, 1 blade • Engineers’ hammer, 300 g • PUK pocket saw, fixed handle • Electricians’ chisel, 10 x 250 mm • Paint scraper, 40 mm • Voltage tester, blade 50 mm • Measuring tape, 3 m • Water brushes
Art. no. 220277
empty 220275
21-pieces
kg 6,540
PU 1
Material: extra strong 600D polyester, watertight and dirtrepellent, colour: black/green. Features: 1 Front compartment with 7 compartments narrow and wide 2 2 Side compartments with zipper 3 inside 6 compartments small and 6 compartments wide 4 double bottom with small parts box 2
4
1 3
Art. no. 220290
19-pieces
empty 220275
kg 4,200
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
169
Tool bag 1000 V
Tool belts
HAUPA Tool bag VDE
Tool belt „VDE Plus“
8 compartments for your tools, reinforced main compartment, steel rivets for high reliable quality. Big front compartment for nails or measurement tape, hammer sleeve, fits up to 135 cm hips, material: extra strong 600D polyester, colour: green, black
10 compartments to organize your tools, hammer sleeve and tapeholder belt loop for easy attachment to belt, materials: extra strong 600D polyester, colour: black/green Contents: • 2C-VDE-Cable cutters 200 mm • 2C-VDE-Side cutters 165 mm • 2C-VDE-Combination pliers 185 mm • 2C-Replaceable blade system „Vario“ 1000 V, 10 pcs. • VDE-Cable cutter straight blade, 50 mm • Voltage tester „Profi“ 12-690 V • Test Pen „Basic“
Contents: • 2C combination pliers, 200 mm • 2C side cutters, 160 mm • 2C electrician’s screwdriver • 2C cross slotted screwdrivers PH, size 1 and 2 • Voltage tester “Basic” • Cable knife, 1-piece
Art. no. 220211
empty 220105
7-pieces
kg 1,723
PU 1
HAUPA Tool bag 1000 V Tool bag with inner and outer tool compartments, rubber-reinforced base. Comes complete with 13 tools. Art. no. 220281
Contents: • 2C-VDE combinations pliers 185 mm • 2C-VDE side cutters 165 mm • 2C-VDE telephone pliers pliers, straight, 200 mm • 2C-VDE wire stripping pliers 160 mm • 2C-VDE-screwdriver set, 6 electrician’s screwdrivers • Spanner for switch-cabinets • Cable knive • Voltagetester “Basic”
16-pieces
empty 220224
kg 2,740
PU 1
Tool belt „VDE“ 10 compartments to organize your tools, hammer sleeve and tapeholder belt loop for easy attachment to belt, materials: extra strong 600D polyester, colour: black/green Contents: • 2C-VDE-Side cutters 165 mm • 2C-VDE-Cable cutters 160 mm • 2C-VDE-Combination pliers 185 mm • 2C-VDE-Electricians’ screwdriver 5,5x125 mm • 2C-VDE-Cross slotted screwdrivers PH 2 • 2C-VDE-Electricians’ screwdriver 3x100 mm • VDE-Cable cutter straight blade, 50 mm • Test Pen „Basic“
Art. no. 220510
empty 220061
13-pieces
kg 3,919
PU 1
Art. no. 220282
170
kg Size TL Ø
Weight in kg Size Total length Cross-section mm
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
Contents Blade length Diameter in mm² Cutting strength
8-pieces
Col. Mat. TMA WS
empty 220224
Colour Material Tested/Measured area Wrench size
kg 2,020
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1
Working under tension
Protection Equipment
...convincing solutions
Safety tools Gloves in accordance with DIN EN 60903
Safety fuse grips
made from latex, for working voltages of 500, 1000, 7500, 15000, 17000 to 26500 Volt. Electricians gloves by HAUPA protect from dangers through arcing faults. Pleasant, slightly roughened surface in the palm and finger area (improved non-slip)
with slip off protection and protection sleeve, for low voltage (NH) fuses class 00 - 3, protective sleeve made from smooth, impregnated leather
Art. no. 120012 Art. no. 120004 120005 120006 120007 120007/1 120006 561 120006 564 S 120006 587
size Volt 9 500 10 500 9 1000 10 1000 11 1000 10 7500 10 17000 10 26500
TL 350 350 400 400 400 400 400 400
strength 0,5 0,5 1,0 1,0 1,0 1,5 2,3 2,9
kg 0,270 0,293 0,270 0,280 0,111 0,646 0,727 0,947
PU 1 1 1 1 1 1 1 1
kg 0,563
PU 1
Electricians‘ protection helmets acc. to DIN EN 397 1000 V low weight, very weatherproof even in cold areas and a stable and very comfortable 4-point belt strap interior. Adjustable to head size, rain catch, slots for ear protection, mount for face protection shields (Art. 12 00 10)
Heat protection gloves acc. to EN 407 411 Inner glove for heat insulation according to EN 407, flame resistant, made from NOMEX III, heat insulation for contact and insulation against convective heat
Art. no. 120011
kg 0,039
PU 1
Art. no. 120008 120008 GELB 120008 ROT 120008 WEISS
green yellow red white
kg 0,558 0,343 0,343 0,343
PU 1 1 1 1
kg 2,160 2,235 2,400 2,550 2,160
PU 1 1 1 1 1
kg 0,275
PU 1
Electricians‘ boots acc. to EN 50321 Class 0 Cotton gloves for putting underneath
size 42 to 48
short cotton gloves to wear with latex-gloves Art. No. 12 00 04 - 12 00 07
Art. no. 120003
kg 0,041
PU 1
Set with protective gloves EN 60903 Safety set in storage bag made from polyester Content 120029: 120006, 120003, 120028
172
kg Size TL Ø
42 43 44 - 45 46 47 - 48
Safety-face masks acc. to EN 166 for protection against arc faults
Content 120037: 120006, 120003
Art. no. 120029 120037
Art. no. 120014 120015 120016 120017 120018
TL 400 400
4-pieces 3-pieces
Weight in kg Size Total length Cross-section mm
CW L W No.
kg 6,860 6,860
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1 1
Art. no. 120010
Contents Blade length Diameter in mm² Cutting strength
transparent
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
Electricians protection visor acc. to EN 166
Ear defenders acc. to EN 352
Protection against short circuit lighting, vision screen of acetate, glassy, transparent forehead protection, convenient head mounting and individual adjustable
Enclosed hearing protectors according to EN 352 with universal bow, soft sealing cushions for long comfort in wear, SNR: 23 dB
Art. no. 150377
transparent
kg 0,373
PU 1
Art. no. 120111
dB
red
23
kg 0,143
PU 1
kg 0,184
PU 1
Ear defenders acc. to EN 352 Safety classes acc. to EN 166
Dielectric design for environments with the risk of electrical influences, supersoft sealing cushions for long comfort in wear, three wearing positions make combination with safety helmets, face and breathing masks and other safety equipment easy, SNR: 26 dB
Goggles with transparent lenses, black/orange nylon frame, lenses made of polycarbonate, light weight, high wearing comfort, protects against mechanical risks caused by flying parts, EN166, ANSI Z87.1
Art. no. 120087
kg 0,270
PU 1
dB
blue
26
Ear muffs for helmet
Safety classes acc. to EN 166
Ear muffs including helmet holder SNR 23 for all currently available protective helmets
Single lens goggles with transparent lenses, black nylon frame, lenses made of polycarbonate, light weight, high wearing comfort, arm length can be adjusted Protects against mechanical risks caused by flying parts, EN166, ANSI Z87.1
Art. no. 120088
Art. no. 120112
kg 0,029
PU 1 Art. no. 120116
dB
green
23
kg 0,184
PU 1
Safety classes acc. to EN 166 Single lens goggles with transparent lenses, soft transparent PVC frame, lenses made of polycarbonate, light weight, high wearing comfort, elastic and adjustable head band, protects against mechanical risks caused by flying parts, EN166, ANSI Z87.1
Art. no. 120093
kg 0,067
PU 1
Ear protection plugs Universal size, the material adapts individually to every auditory canal, simple to handle, reusable SNR: 30 dB
Art. no. 120115
dB
green
30
Safety classes acc. to EN 166 with UV filter
Dust masks
Protective goggles with heavily tinted lenses, black nylon frame with non-slip pads, lenses made from polycarbonate, low weight, high level of comfort when wearing, protects from mechanical risks caused by flyaway parts, particular when outside EN 166, ANSI Z87.1
light type, made of filter-fleece, against fine particulate
Art. no. 120117
kg 0,270
PU 1
Art. no. 120120 120122
filterclass P 1 filterclass P 1
kg 0,010
PU 1
kg 0,010 0,014
PU 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
173
Safety tools Safety-sets VDE/GS
Climping irons acc. to DIN 48 345
in practical bag, 6-pieces. Contents: Electricians‘ helmet, safety mask, safety handle, gloves size 10 (1000 V), insulating mat 1000 x 1000 x 4 mm
postal-type, with 2 points, offset foot-plate and wide leather heel cap, width of points 260 mm, for wooden posts of 150 - 240 mm diam.
Art. no. 150280
kg 4,050
PU 1
Climping irons Art. no. 300228 300229
kg 6,860 3,480
6-pieces 5-pieces (without insulating mat)
PU 1 1
drop forged steel, 3 points, interchangeable frame, strong leather, for pales of 110 - 260 mm, for every size of shoes
Safety Jacket IPS acc. to DIN VDE 0680 part 1 E length 90 cm, with sewed on cowl, breast pocket with plate, colour signal-red, similar to DIN IEC 304, 500 volt
Art. no. 150286 150288
small cap wide cap
kg 4,150 4,790
PU 1 1
Safety ropes acc. to A-DIN 83330 Safety ropes with hand loop and safety spring hooks acc. To A-DIN 5290. Type: 16 mm drilled polyamide rope
Art. no. 120020 150300
size S, M, L, XL bag for storing
kg 1,500 0,319
PU 1 1
Art. no. 150262 150264 150266 150268
TL 5000 10000 15000 20000
strength 16 16 16 16
kg 1,185 2,040 2,810 3,781
PU 1 1 1 1
kg 1,210
PU 1
Safety belts acc. EN 358 Safety trousers IPS acc. to DIN VDE 0680 part 1 E
safety belt universal for all sizes, length 1,50 meter
band trousers, adjustable elastic braces, outside pocket with plate, colour signalred, similar to DIN IEC 304, 500 volt
Art. no. 150240
TL 1500
Fallstop acc. to EN 354 Breaking device and rope shortening acc. to EN 355, length 2 m, one hand spring hooks on both sides
Art. no. 120022 150300
174
kg Size TL Ø
size S, M, L, XL bag for storing
Weight in kg Size Total length Cross-section mm
CW L W No.
kg 1,100 0,319
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1 1
Art. no. 150274
Contents Blade length Diameter in mm² Cutting strength
TL 2000
Col. Mat. TMA WS
kg 1,090
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1
Travelling safety device DIN 353-2, Type ASK 1
Insulating floor mats acc. to IEC-61111-Class 2
Rope shortener function: takes up slack rope and thus reduces height of the fall. Fall absorber function: in the case of a fall this limits the catching impact to a medically acceptable level of 6 kN. Features: Rope shortener made from V2A stainless steel, connection band with integrated fall absorber and self-securing trigger snap, high level of functional safety and absolutely maintenance free due to simplest mechanism, cannot be operated incorrectly, as every device is firmly attached to the rope
with anti-skid surfaces, colour: grey, 17.000 Volt
Art. no. 120030 120031 120033
TL 1000 10000 10000
1 m x 1 m x 3 mm 10 m x 1 m x 3 mm 10 m x 1 m x 4,5 mm
role role
kg 3,754 34,000 42,000
PU 1 1 1
kg 0,037 0,193 1,000 2,485 3,200
PU 1 1 1 1 1
Rubber towels acc. to VDE 0680/1 grease and acid-proof, for covering of live equipment Art. no. 150275 150276 150277 150278 150279
TL 5000 10000 15000 20000 25000
strength 12 12 12 12 12
kg 1,953 2,482 3,062 3,174 3,675
PU 1 1 1 1 1
Safety harness DIN EN 361 Universal harness, rapid adjustment of shoulder strap (orange, 45 mm), body strap (orange, 45 mm) and leg straps (blue, 45 mm), fits all sizes, 1 back D ring, 2 side rings, lightweight, comfortable fabric. The forces that develop during a fall are transferred to less sensitive parts of the body
Art. no. 120040 120042 120044 120046 120048
TL 120 350 600 1000 1200
width 120 250 600 1000 1200
strength 1,6 1,6 1,6 1,6 1,6
Covering blankets transparent in accordance with VDE 0680 part 1, with special labelling 1000 V, transparent, largely UV-resistant, flexible in the cold
Art. no. 150270
kg 1,614
PU 1
Art. no. 120200 150322
TL 50000 25000
width 1300 1200
strength 0,5 1,0
kg 41,500 38,000
PU 1 1
Covering blankets transparent Personal safety set
in accordance with VDE 0680 part 1, with special labelling 1000 V, transparent, largely UV-resistant, flexible in the cold
Safety harness (15 02 70), safety device (15 02 77) and shock absorbing rope (15 m) in practical backpack
Art. no. 150258
4-pieces
kg 4,961
PU 1
Art. no. 150302 150304 150306 150308 150310 150312 150314 150316 150318 150320
TL 1000 1000 1000 1000 1000 1000 600 600 400 400
width 600 600 400 400 300 300 400 400 300 300
strength 1,0 0,5 1,0 0,5 1,0 0,5 1,0 0,5 1,0 0,5
kg 0,750 0,332 0,520 0,260 0,380 0,190 0,340 0,171 0,170 0,100
PU 1 1 1 1 1 1 1 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
175
Safety tools Plastic clips 1000 V
Insulator cover for gable insulators 1000 V
for fastening of rubber towels
with plastic buttons, absolutely safety attachments, touch protection on the bottom side, of weak, weather proofed insulation-material, for long term usage suitable
Art. no. 120049 120050
TL 80 160
kg 0,029 0,069
PU 1 1
Art. no. 120089
TL 115
width 270
kg 1,100
PU 1
Self adhesive PVC tape VDE 0340/T1/5.75, temperature area - 10 to + 90° C, 100 x 0,15 mm
Insulator cover for gable insulators 1000 V double faced, inside soft and outside strong plastic, for transformers and similar products
Art. no. 120095 120096
TL 10000 10000
kg 0,192 0,190
grey red
PU 1 1 Art. no. 120057 120059
Slip on bushes 1000 V
TL 80 300
kg 0,400 0,775
PU 1 1
kg 0,390
PU 1
kg 0,155 0,205
PU 1 1
for protective covering of bare live cable terminals, numbered: No. 1 - 2 - 3
NH-protecting caps 1000 V for the covering of spring contacts Art. no. 120060 120062 120064
TL 80 80 80
Ø 10 10 10
for No. 1 2 3
kg 0,008 0,008 0,008
PU 1 1 1 Art. no. 120058
Slip on bushes 1000 V self clamping, not numbered
TL 315
width 170
NH-protecting caps 1000 V for the covering of spring contacts
Art. no. 120070 120072 120074 120071 120069 120073
TL 75 100 120 135 155 150
Ø 10 20 30 40 50 60
kg 0,011 0,121 0,207 0,372 0,172 0,144
PU 1 1 1 1 1 1
Art. no. 120077 120078
TL 170 255
width 140 135
Insulator cover for gable insulators 1000 V with plastic buttons, absolutely safety attachments, touch protection on the bottom side, of weak, weather proofed insulation-material, for long term usage suitable
Art. no. 120079
176
kg Size TL Ø
TL 245
width 270
Weight in kg Size Total length Cross-section mm
kg 0,900
CW L W No.
Cutting width Length in mm Width mm Number
Cont. BL mm² St.
PU 1
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
Sealing pliers and accessories Sealing pliers
Seal wire
made of cast iron, punch exchangeable and hardened, bright nickel-plated
Art. no. 210700 210702 210704
TL 125 145 165
dies-Ø 8 9 10
kg 0,243 0,316 0,448
PU 1 1 1
Dies for sealing pliers
dies-Ø 8 9 10
kg 0,004 0,004 0,006
d1 0,5 0,5 0,5 0,5 0,3 0,3
d2 0,5 0,5 0,3 0,3 0,3 0,3
kg 0,532 1,041 0,530 1,035 0,533 1,037
PU 1 1 1 1 1 1
kg 0,199 0,220 0,207
PU 1 1 1
PU 1 1 1 Art. no. 150375 BLAU 150375 GRÜN 150375 ROT
Engraving for sealing pliers Special engraving on request Art. no. 210731 210732 210733
TL 1150 2300 1900 3800 3000 6000
Plastic seal wire
loose dies
Art. no. 210710 210712 210714
Art. no. 150360 150362 150364 150366 150368 150370
TL 1000 1000 1000
d1 0,5 0,5 0,5
d2 0,6 0,6 0,6
blue green red
up to 3 letters every further letter every border
Lead seals
Art. no. 150340 150342 150344
Ø 8 9 10
kg 1,080 1,110 1,010
PU 1 1 1
Ø 9 10
kg PU 0,002 1000 0,003 1000
Plastic seals
Art. no. 150343 150345
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
177
Accessories Parallel rope tension clamps
Hemp tackle block ropes
for copper and steel cables and wires
made of hemp, 20 m long
Art. no. 130064 130066 130068
for ropes mm² 6-35 16-70 50-100
Ø 3-8 4-12 8-16
load kg 1000 1400 2500
kg 0,890 1,262 1,920
PU 1 1 1
Art. no. 130042 130044
rope-Ø 8 10
kg 0,950 1,519
Tackle blocks made from steel, with turnable hooks, 2 blocks, rust protected finish, with 3 brass rolls
Art. no. 130004 130006
178
kg Size TL Ø
roll-Ø 50 60
rope-Ø 8 10
Weight in kg Size Total length Cross-section mm
load kg 200 250
CW L W No.
Cutting width Length in mm Width mm Number
kg 1,820 1,700
Cont. BL mm² St.
PU 1 1
Contents Blade length Diameter in mm² Cutting strength
Col. Mat. TMA WS
Colour Material Tested/Measured area Wrench size
Sbl. Drive Load PU
Saw blade length Drive Load Packing unit/piece
PU 1 1
Standard program
Standard tools
...convincing solutions
2-component screwdrivers
INFO Screwdrivers range
2-component Engineers’ screwdrivers Industrial quality
The HAUPA screwdriver series features:
with 2-component handle made from PP/TPE material, blade made from molybdenum- vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point
• homogenous size adjustment of the screwdriver handles for better power transmission. Enlargement of soft zone Art. no. 101640 101642 101644 101646 101648 101650
• elegant, ergonomically shaped, non-slip 2-component handles made from PP/TPE material • injected blade profile, for easy access in the tool case. Abrasion not possible! • magnetic blade for secure hold of screws High-gripsystem • blade made from molybdenum vanadium steel
BL 75 100 125 150 175 200
CW 5 6 7 8 9 10
TL 170 205 230 270 295 320
kg 0,056 0,090 0,109 0,160 0,170 0,238
PU 1 1 1 1 1 1
2-component cross slotted screwdrivers Phillips
• an addition anti-slip protection on Phillips profiles prevents the tool from slipping out of the screw
with 2-component handle made from PP/TPE material, blade made from molybdenum- vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point
Roll repressive Art. no. 101684 101686 101688 101690
size 0 1 2 3
BL 60 80 100 150
TL 145 175 205 270
kg 0,032 0,055 0,087 0,161
PU 1 1 1 1
2-component cross slotted screwdrivers Pozidriv with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point
Art. no. 102612 102614 102616
size 1 2 3
BL 80 100 150
TL 175 205 270
kg 0,055 0,088 0,160
PU 1 1 1
2-component screwdrivers Tx with 2-component handle made from PP/TPE material, blade made from molybdenum- vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point
2-component Electricians’ screwdrivers with 2-component handle made from PP/TPE material, blade made from molybdenum- vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point
Art. no. 101229/6 101230
size 6 8
BL 100 100
TL 185 185
kg 0,036 0,036
PU 1 1
2-component screwdrivers Tx with security pin with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point
Art. no. 101604 101606 101608 101610 101612 101614
180
kg Ø TL Ø
BL 75 100 125 150 175 200
CW 2,5 4 4 5 5 5
Weight in kg Cross-section mm Total length Cross-section mm
TL 160 195 220 245 270 295
CW L W D
kg 0,027 0,051 0,054 0,067 0,069 0,074
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
PU 1 1 1 1 1 1
Art. no. 101200 101202 101204 101206 101208 101210 101211
Contents Blade length Diameter in mm² Strength
size 9 10 15 20 25 27 30
c-hole Mat. TMA WS
BL 100 100 100 100 125 125 150
TL 185 195 195 195 195 230 255
Core hole Material Tested/Measured area Wrench size
kg 0,036 0,057 0,054 0,058 0,064 0,093 0,093
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1 1 1 1 1 1 1
2-component screwdrivers 2-component Electricians’ screwdrivers
2-component Screwdriver set
with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered
with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered. Contents: 2 electricians’ screwdrivers 2 engineers’ screwdrivers 2 screwdrivers Phillips
Art. no. 101520 101521 101522 101524 101526 101528 101530
BL 75 100 100 125 150 175 200
CW 2,5 3 4 4 5 5 5
TL 160 195 195 220 245 270 295
kg 0,027 0,030 0,051 0,054 0,068 0,072 0,078
PU 1 1 1 1 1 1 1
2-component Engineers’ screwdrivers
BL 75 100 125 150 175 200
CW 5 6 7 8 9 10
TL 170 205 230 270 295 320
kg 0,057 0,091 0,114 0,146 0,210 0,214
6-pieces
PH
kg 0,431
PU 1
2-component Screwdriver set
with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered
Art. no. 101532 101534 101536 101538 101540 101541
Art. no. 101560
with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered.
PU 1 1 1 1 1 1
Contents: 2 electricians’ screwdrivers 2 engineers’ screwdrivers 2 screwdrivers Pozidriv
Art. no. 101562
6-pieces
PZ
kg 0,429
PU 1
2-component cross slotted screwdrivers Phillips with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered
Art. no. 101542 101544 101546 101548
size 0 1 2 3
BL 60 80 100 150
TL 145 175 205 270
kg 0,032 0,059 0,091 0,147
2-component screwdriver set Tx screwdriver set Tx with security pin, with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, chrome plated with black point, 5-pieces.
PU 1 1 1 1
2-component cross slotted screwdrivers Pozidriv
Contents: 1 screwdriver each Tx 10, Tx 15, Tx 20, Tx 25, Tx 30
Art. no. 101212/S
with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, blade black PVC covered
5-pieces
Tx with security pin
kg 0,337
PU 1
2C-Stubby gasifier screwdrivers with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished Art. no. 101550 101552 101554
size 1 2 3
BL 80 100 150
TL 175 205 270
kg 0,056 0,088 0,146
PU 1 1 1 Art. no. 103120 103122
BL 30 40
CW 6 8
TL 80 90
kg 0,050 0,051
PU 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
181
2-component screwdrivers
INFO ESD electronic screwdrivers
2C-Stubby gasifier cross slot screwdrivers Phillips with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished
Art. no. 103080 103082
size 1 2
BL 30 40
TL 80 90
kg 0,051 0,051
PU 1 1
2C-Piercing awls with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished
Now with 2-component handle, these screwdrivers do not just convince oval rotating cap because of their homogenous design, but also because of their with recessed grip user-friendly handle. Benefits: • chrome molybdenum vanadium steel • blades hardened throughout • two component handels, hard and soft components • permanently discharging special synthetic material • Quick rotating zone • rotating centring head with recessed grip • black precision tips quick rotating zone • chromed blade 2-component soft handle
Art. no. 103470 103472
BL 100 100
Ø 6 6
form round point square point
kg 0,083 0,085
PU 1 1
Blade made from chrome molybdenum vanadium steel, chromed with black tip
2-component socket wrenches with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished
ESD electronic screwdrivers Blade made from chrome molybdenum vanadium steel, chromed with black tip, slotted
Art. no. 101484 101486 101488 101490 101492 101494 101496 101500 101502
BL 125 125 125 125 125 125 125 125 125
TL 220 220 220 230 230 230 230 245 245
WS 5 5,5 6 7 8 9 10 12 13
kg 0,105 0,107 0,110 0,113 0,115 0,120 0,124 0,165 0,171
PU 1 1 1 1 1 1 1 1 1
2-component socket wrenches set
Art. no. 100704 100250 100704 A 100241 100243 100252 100257 100259 100261
BL 60 50 60 60 100 50 50 75 50
CW 0,8 1,0 1,2 2,5 3,5 1,6 2,0 2,4 3,0
TL 150 150 150 150 150 150 150 175 200
kg 0,023 0,014 0,021 0,015 0,018 0,014 0,015 0,017 0,020
PU 1 1 1 1 1 1 1 1 1
with 2-component handle made from PP/TPE material, blade made from molybdenum-vanadium steel, sanded blade, hardened, blast-finished, 7-pieces.
ESD electronic screwdrivers
Contents: 1 piece each 5 - 5,5 - 7 - 8 - 10 - 11 - 13 mm
Blade made from chrome molybdenum vanadium steel, chromed with black tip, cross recess, Philipps
Art. no. 101510
kg 0,898
PU 1
Industrial screwdriver set with replaceable dual blades. 2-component screwdriver shaft with 10 interchangeable blades, hexagonal, Material: bit steel S2, (chrome silicon manganese molybdenum vanadium steel), in a stable metal case. Replaceable blades are also available loose. Blade types: Slotted 3, 4, 5, 7 Phillips 0, 1, 2, 3 Pozidriv 0, 1, 2, 3 Tx 10, 15, 20, 25 Hexagonal 2, 3, 4, 5
Art. no. 104008
182
kg Ø TL Ø
kg 1,060
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
size 000 00 0 1
BL 50 50 50 50
TL 150 150 150 150
kg 0,015 0,022 0,024 0,017
PU 1 1 1 1
ESD electronic screwdrivers Blade made from chrome molybdenum vanadium steel, chromed with black tip, hexagonal
Art. no. 100728 100729 100729 A 100736
11-piece Weight in kg Cross-section mm Total length Cross-section mm
Art. no. 100714 100715 100716 100249
size 1,5 2,0 2,5 3,0
BL 50 50 50 50
TL 150 150 150 150
WS 1,5 2,0 2,5 3,0
kg 0,014 0,015 0,017 0,020
PU 1 Contents Blade length Diameter in mm² Strength
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1 1 1 1
Electronic screwdrivers ESD electronic screwdrivers
Electronic screwdriver set
Blade made from chrome molybdenum vanadium steel, chromed with black tip, Tx/Safety Tx
Chrome vanadium steel, screw holder with black /green plastic handle, 4 x hex head 3, 4, 5, 6 and 8 exchangeable screwdriver blades (slot/Phillips/Tx head)
Art. no. 100741 100742 100718 A 100720 100721 100712 100713 100723 100734
size 4 5 6 7 8 9 10 15 20
BL 50 50 50 50 50 50 50 50 50
TL 150 150 150 150 150 150 150 150 150
kg 0,017 0,018 0,018 0,014 0,018 0,018 0,016 0,020 0,020
PU 1 1 1 1 1 1 1 1 1 Art. no. 104004
13-pieces
kg 0,288
PU 1
ESD electronic screwdrivers Blade made from chrome molybdenum vanadium steel, chromed with black tip, Tri-Wing
Electronic screwing bit set Chrome vanadium steel, screw holder with black/green plastic handle, 1 bit holder, 2 nuts of 5 + 6 mm, 30 bits for slot/Phillips/Pozidriv/Tx/hex head
Art. no. 100738
size 2,4
BL 50
TL 150
kg 0,017
PU 1
ESD electronic screwdriver set Blade made from chrome molybdenum with 2-component handles, 7-pieces, slotted/cross recess.
Contents: 1 ESD electronic screwdriver each 1.6 x 50, 2.0 x 50, 2.4 x 50, 3.0 x 50 and 1 Phillips size 1. 0 and 00 x 50 each
Art. no. 104002
34-pieces
kg 0,230
PU 1
kg 0,020
PU 1
Precision screwdrivers Art. no. 104010
7-pieces
kg 0,225
PU 1
Flexible screwdrivers „Piccolo“ with pliable, plastic coated shank, plastic handle
HAUPA Electronic screwdriver set standard chrome vanadium steel, chrome-plated, with large plastic handle, with black point, 7 pieces.
Art. no. 100364
Contents: 1 Electricians‘ screwdriver size 1.6 x 50, 2.0 x 50, 2.4 x 50, 3.0 x 50, and 1 Phillips size 1, 0 and 00 x 50
Claw retrievers
7-pieces
CW 2,8
TL 205
with flexible shaft, chrome-plated, for gripping and retrieving of small parts in normally inaccessible places
Art. no. 100366 Art. no. 104000
BL 125
kg 0,221
TL 525
kg 0,060
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
183
Precision screwdrivers
Allen keys
Claw retrievers
Allen keys set
with inflexible shaft, chrome-plated, for gripping and retrieving of small parts in normally inaccessible places
chrome vanadium steel, (59 Cr-Mo-V 4), DIN 911, chromium-plated, on key ring. Contents: size 2,5 - 3 - 4 - 5 - 6 - 8 - 10
Art. no. 100368
Art. no. 100640
TL 165
kg 0,050
PU 1
WS 2,5-10
quantity 8
kg 0,250
Checking mirrors
Allen keys set
with double ball joint
chrome vanadium steel, (59 Cr-Mo-V 4), im metal clip, key bronzed, DIN 911. Art. 10 06 30: 2,5-3-4-5-6-8 mm Art. 10 06 33: 1,5-2,5-3-4-5-6 mm Art. 10 06 34: 2,5-3-4-5-6-8-10 mm Art. 10 06 32: 3/32-1/8-5/32-3/16-1/4-5/16“ AF Art. 10 06 35: 1/16-5/64-3/32-1/8-5/32-3/16-7/32” AF Art. 10 06 36: 3/32-1/8-5/32-3/16-1/4-5/16-3/8“ AF
Art. no. 100680
TL 210
Ø 60
kg 0,028
PU 1
PU 1 Art. no. 100630 100633 100634
Checking mirrors with illumination, flexible shaft and plastic handle, 3 interchangeable mirrors Ø 14-23-30 mm, with battery
WS 2,5-8 1,5-6 2,5-10
quantity 6 7 7
kg 0,249 0,145 0,335
PU 1 1 1
Allen keys set chrome vanadium steel, (59 Cr-Mo-V 4), im metal clip, key bronzed, DIN 911.
Art. no. 100684
TL 530
Ø 12
kg 0,169
PU 1
Magnetic retriever flexible shaft and plastic handle
Art. no. 100632 100635 100636
WS 3/33"-5/16" 1/16"-7/32" 3/32"-3/8"
quantity 6 7 7
kg 0,251 0,135 0,328
PU 1 1 1
Keys set Tx Art. no. 100694
TL 520
Ø 12
kg 0,097
PU 1
Miniature trimming set
chrome vanadium steel, (59 Cr-Mo-V 4), in metal-clip, surface black, keys black. Contents: TX 9 - 10 - 15 - 20 - 25 - 27 - 30 - 40
9-pieces Art. no. 100943
size TX9 - 40
quantity 8
kg 0,260
PU 1
Ball point allen keys Art. no. 100696
kg 0,197
9-pieces
PU 1
chrome vanadium steel, (59 Cr-Mo-V 4), im metal clip, black keys, DIN 911 Contents: size 2.5 - 3 - 4 - 5 - 6 - 8 - 10
Art. no. 100917
184
kg Ø TL Ø
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
WS 2,5-10
c-hole Mat. TMA WS
quantity 7
Core hole Material Tested/Measured area Wrench size
kg 0,334
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1
Allen keys Allen keys DIN 911
Allen keys set
chrome vanadium steel, (59 Cr-Mo-V 4), DIN 911, chromium-plated
chrome vanadium steel, (59 Cr-Mo-V 4), chromium-plated, DIN 911, 8 pieces in handy plastic box, with sliding plexiglasscover. Contents: size 2 - 2.5 - 3 - 4 - 5 - 6 - 8 - 10
Art. no. 100590 100592 100594 100596 100598 100600 100602 100606 100610 100612 100614
TL 45x14 50x16 56x18 63x20 70x25 80x28 90x32 100x36 112x40 125x45 132x50
WS 1,5 2 2,5 3 4 5 6 8 10 12 13
Inch 1/16" 5/64" 3/32" 1/8" 5/32" 3/16" 1/4" 5/16" 3/8"
kg 0,020 0,020 0,020 0,030 0,080 0,019 0,028 0,058 0,099 0,160 0,202
1/2"
PU 1 1 1 1 1 1 1 1 1 1 1
chrome vanadium steel, (59 Cr-Mo-V 4), DIN 911, chromium-plated
TL 56x18 63x20 70x25 80x28 90x32 100x36 112x40
WS 2,5 3 4 5 6 8 10
WS 2-10
quantity 8
kg 0,303
PU 1
Ball point allen keys chrome vanadium steel, (59 Cr-Mo-V 4), DIN 911, chromium-plated, 8 pieces in handy plastic box, with pushable plexiglasscover. Contents: size 2 - 2.5 - 3 - 4 - 5 - 6 - 8 - 10
Ball point allen keys
Art. no. 100902 100903 100904 100905 100906 100908 100909
Art. no. 100585
kg 0,003 0,005 0,011 0,019 0,029 0,058 0,102
PU 1 1 1 1 1 1 1
Art. no. 100915
WS 2-10
quantity 8
kg 0,301
PU 1
Allen keys set Tx chrome vanadium steel, (59 Cr-Mo-V 4), 8 pieces in handy plastic box, surface black. Contents: TX 9 - 10 - 15 - 20 - 25 - 27 - 30 - 40
Art. no. 100941
size TX9 - 40
quantity 8
kg 0,205
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
185
Voltage testers
INFO Bits
VDE/GS-Voltage testers, VDE-tested 0426/72 with clear-transparent, shock-resistant plastic handle. Art. No. 10 06 46 each in wallet Art. No. 10 06 47 loose
Art. no. 100646 100647 100648 100649
BL 50x3 50x3 100x3,5 100x3,5
TL 140 140 190 190
Industrial quality
HAUPA-Bits are made of high-alloyed tool steel, best hardened (H Rc 60 - 63). They show very high tenacity and tolerance. The long life speakes of the hard use and quality.
TMA 100-250 100-250 100-250 100-250
kg 0,020 0,016 0,037 0,032
PU 1 1 1 1
Voltage tester Finnlish type, Cellidor, only available for Finland
1 box = 10 pieces (self-service packaging) Art. no. 100645
BL 50x3
TL TMA 140 150-250
kg 0,016
PU 1
Screwdriver bits DIN 3126, form E 6,3, shank 1/4“, 10 pieces on card
Voltage tester VDE/GS with retactable screwdriver blade Art. no. 102110 102112 Art. no. 100650
BL 25x4
TL TMA 140 100-250
kg 0,020
size 0,6x4,5 0,8x5,5
CW 4,5 5,5
TL 50 50
kg 0,104 0,115
PU 1 1
kg 0,062 0,067 0,064 0,066 0,105 0,124 0,106 0,123 0,180 0,097 0,063 0,100 0,251 0,358
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1
kg 0,064
PU 1
PU 1
Screwdriver bits DIN 3126, form E 6,3, shank 1/4“, 10 pieces on card
Voltage testers VDE/GS 5 mm surounding hand-protection, clip of insulating material, fixed installed scale with dark background
Art. no. 100700
TL TMA 190 125-250
kg 0,036
PU 1
Art. no. 102152 102154 102156 102158 102114 102116 102160 102162 102164 102166 102168 102170 102172 102174
size PH 1 PH 2 PH 1 TiN PH 2 TiN PH 1 PH 2 PH 1 TiN PH 2 TiN PH 1 PH 2 PH 1 TiN PH 2 TiN PH 1 PH 2
TL 25 25 25 25 50 50 50 50 90 90 90 90 150 150
Screwdriver bits, red. DIN 3126, form E 6,3, shank 1/4“, 10 pieces on card
Art. no. 102155
186
kg Ø TL Ø
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
size 2
c-hole Mat. TMA WS
TL 25
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Bits Screwdriver bits
SDS magnetic holder
DIN 3126, form E 6.3, shank 1/4“, 10 pieces on card
with strong permanent magnet, bit holder 1/4”, form C 6.3 DIN 3126, to hold screws, rust-free, stainless steel sleeve, suitable for SDS bits holders
Art. no. 102176 102178 102180 102182 102118 102120 102184 102186 102188 102190 102192 102194 102196 102198
size PZ 1 PZ 2 PZ 1 TiN PZ 2 TiN PZ 1 PZ 2 PZ 1 TiN PZ 2 TiN PZ 1 PZ 2 PZ 1 TiN PZ 2 TiN PZ 1 PZ 2
TL 25 25 25 25 50 50 50 50 90 90 90 90 150 150
kg 0,062 0,065 0,062 0,066 0,107 0,123 0,106 0,122 0,179 0,231 0,177 0,229 0,257 0,360
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Screwdriver bits Tx
size Tx 15 Tx 20 Tx 25 Tx 30 Tx 15 Tx 20 Tx 25
TL 25 25 25 25 50 50 50
TL 55
kg 0,045
PU 1
Magnetic holder with strong magnetic, shank 1/4“, form C 6.3 DIN 3126, for holding the screws, socket made of stainless steel, with inside ring, suitable for all
Art. no. 102132 102134
TL 75 60
kg 0,045 0,040
PU 1 1
HAUPA „Bit box“
DIN 3126, form E 6.3, shank 1/4“, 10 pieces on card
Art. no. 102200 102202 102204 102208 102122 102124 102126
Art. no. 102131
kg 0,061 0,063 0,065 0,070 0,100 0,110 0,112
PU 1 1 1 1 1 1 1
Description: • Belt clip • Ergonomic (with the opening of the box the bits will be moved in 45° angle, easy pick up position) • A special mechanism fixes the bits even in an up side down position Contents: 17-pieces Screwdriver bits, form E 6.3, shank 1/4“, 25 mm PH: 1, PH 2, PH 3 PZ: 1, PZ 2, PZ3 Tx: 10, T 15, T 20, T 25 slotted: 4.0 (0.5), 5.0 (0.8), 5.0 (1.0), 6.0 (1.0) hexagon: 4.0, 5.0, 6.0 Magnetic holder 60 mm
Bits for PZ slot profile The PZ/FL profile can only be used for combination screws that were previously screwed with a slot or recessed head PZ type screwdriver. The screws have an inner PZ profile with an additional cross slot that also allows it to be screwed with a slot screwdriver
Art. no. 102210
17-pieces
kg 0,170
PU 1
1 PU (packaging unit) = 2 pieces Art. no. 101874 101876
size 1 2
TL 60 60
kg 0,012 0,013
PU 1 1
Magnetic holder with strong magnetic, shank 1/4“, form C 6,3 DIN 3126, for holding the screws, socket made of stainless steel, suitable for all
Art. no. 102130
TL 75
kg 0,056
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
187
Bits HAUPA ratchet screwdriver „Flex“
HAUPA ratchet screwdriver set „Flex“
Ratchet screwdriver with right/left hand motion. Adjustable operating angle of 180°. Safety and special bit set - top quality S2! The screwing grasp also Quick change penholder and 2-components Handle provides for anti-slip and fatiguefree working. The ergonomic form and the soft zones within the pressure area range make a relaxed possible screws. With hanging up hole.
Ratchet screwdriver with right/left hand motion. Adjustable operating angle of 180°. Safety and special bit set - top quality S2! The screwing grasp also Quick change penholder and 2-components Handle provides for anti-slip and fatiguefree working. The ergonomic form and the soft zones within the pressure area range make a relaxed possible screws. With hanging up hole.
Art. no. 104005
kg 0,111
PU 1
Advantages: • Ratchet function • Left/clockwise rotation adjustable • Bending bar: 0°– 45°– 90° • Ergonomic working within restrained ranges • S2 steel industry bit for nearly all applications • 2-components handle • 55 bits and 1 adapter for ¼“ nut
Art. no. 104006
188
kg Ø TL Ø
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
kg 0,810
58-pieces
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1
Standard program
Socket sets
...convincing solutions
Spanners Double ended spanners acc. to DIN 3110
Combination spanners similar to DIN 3113
chrome vanadium steel, bright chromium-plated, head polished, offset at 15°
chrome vanadium steel, chromium-plated, head polished, offset at 15°
Art. no. 110090 110092 110094 110096 110100 110104 110108 110112 110114 110120
TL 120 140 157 172 190 205 223 250 250 302
WS 6-7 8-9 10-11 12-13 14-15 16-17 18-19 21-23 24-26 27-32
strength 3,2 3,5 4,0 4,5 5,0 5,5 6,0 7,0 7,0 8,2
kg 0,240 0,340 0,590 0,057 0,760 0,144 0,182 0,212 0,273 0,519
PU 1 1 1 1 1 1 1 1 1 1
Double ended spanners set acc. to DIN 3110 chrome vanadium steel, chromium-plated, head polished, in plastic bags.
Art. no. 110180 110182 110184 110186 110188 110190 110192 110194 110196 110198 110202 110204 110206 110212 110216 110222
TL 100 110 120 130 140 150 160 170 180 190 210 220 230 260 280 310
WS 6 7 8 9 10 11 12 13 14 15 17 18 19 22 24 27
kg 0,016 0,021 0,028 0,036 0,043 0,058 0,061 0,081 0,075 0,087 0,160 0,164 0,187 0,266 0,316 0,401
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Combination spanners similar to DIN 3113 chrome vanadium steel, bright chromium-plated, head polished, in plastic bags.
Art. no. 110130 110132
WS 6-22 6-32
8-pieces 12-pieces
kg 0,940 2,353
PU 1 1
Double ended ring spanners to DIN 838
Art. no. 110250
chrome vanadium steel, bright chromium-plated, head polished, offset at 75°
WS 6-22
kg 1,144
12-pieces
PU 1
Combination spanners similar to DIN 3113 chrome vanadium steel, bright chromium-plated, head polished, in paper box Art. no. 110140 110142 110144 110146 110148 110152 110154 110160 110164
TL 170 185 205 220 240 265 280 335 370
WS 6-7 8-9 10-11 12-13 14-15 16-17 18-19 24-26 27-32
kg 0,035 0,066 0,075 0,107 0,154 0,175 0,297 0,468 0,611
PU 1 1 1 1 1 1 1 1 1
chrome vanadium steel, bright chromium-plated, head polished, in paper box
190
kg Ø TL Ø
WS 6-22 6-32
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
8-pieces 12-pieces
Cutting width Length in mm Width in mm Depth in mm
kg 1,289 2,451
Cont. BL mm² St.
WS 6-27
kg 1,948
16-pieces
PU 1
Open-jawed ring wrench with ratch function Open-jawed ring wrench with ratch function made from chromium-vanadium steel, chromed surface, polished, fine-toothed, 72 teeth, swing angle 5°, ring side 13° angled, DIN 3113, ISO 3318, in a practical plastic box, wrench size 8 - 9 - 10 - 12 - 13 - 14 - 17 - 19 mm
Double ended ring spanner sets DIN 838
Art. no. 110170 110172
Art. no. 110252
PU 1 1
Art. no. 110900
Contents Blade length Diameter in mm² Strength
WS 8-19
c-hole Mat. TMA WS
kg 1,255
8-piece
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1
Socket sets Adjustable single-head wrench
Socket set
Adjustable single-head wrench with ratch function made from chromiumvanadium steel, forged, chromed, DIN 3117, handle made from TPR, with lasered measuring scale
chrome vanadium steel, „Profi“-quality GS-tested, black plastic case, 1/2”. Contents: 20 Sockets: 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 24 - 26 - 27 - 28 - 30 - 32 mm, 1 ratchet handle, 72 gears with quick release function, 1 extension bar, safety locking type 250 mm, 1 extension bar 125 mm, 1 sliding T-bar 300 mm, 1 universal joint
Art. no. 110590 110592 110594 110596
size 6-19 9-24 10-29 10-34
TL 150 200 240 300
kg 0,160 0,342 0,111 0,111
PU 1 1 1 1 Art. no. 110677
Adjustable single-head wrench with ratch function Adjustable single-head wrench with ratch function made from chromium-vanadium steel, fast and effective working, use of singlehead wrench does not need to be discontinued, forged, chromed, DIN 3117, handle made from TPR, with lasered measuring scale, mounting with anti-theft device and function test
Art. no. 110583 110585
size 6-19 9-24
TL 150 200
kg 0,160 0,342
kg 4,739
25-pieces
PU 1
Socket set chrome vanadium steel, „Profi“-quality GS-tested, black plastic case. Contents: 1/4”: 12 Sockets 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 mm, 1 ratchet handle, 1 universal joint, 1 sliding head for extension bar work as T handle, 2 extension bars 50 + 150 mm, 1 spinner handle for screwdriver, 12 insert bit sockets: PH: 1-2, HX: 3 - 4 - 5 - 6, FD: 5.5 - 7, TX: 20 - 25 - 27 - 30, 5 Hex keys: 1.25 - 1.5 - 2.0 - 2.5 - 3.0 mm 1/2”: 13 sockets 10 - 11 - 12 - 13 - 14 - 15 - 17 - 19 - 22 - 24 - 27 - 30 - 32 mm, 1 ratchet handle, 2 extension bars 75 + 250 mm, 1 sliding head for extension bar work as T handle, 2 plug sockets, 1 universal joint
PU 1 1
Socket set chrome vanadium steel, „Profi“-quality GS-tested, black plastic case, 1/4”. Contents: 12 Sockets: 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12- 13 mm, 1 ratchet handle, 72 gears with quick release function, 14 insert bit socket PH: 1 - 2 - 3, HX: 3 - 4 - 5 - 6 - 8, TX: 10 - 15 - 20 - 25 - 27 -30, 1 flexible extension bar, 2 extension bars 50 & 100 mm, 1 universal joint, 1 sliding T-bar, 1 spinner handle for screwdriver Art. no. 110678
Art. no. 110674
33-pieces
kg 1,051
PU 1
kg 4,385
53-pieces
PU 1
Spanners for switch-cabinets made of metal for hight torques, small size, low weight, with chain inside square 6 mm, inside square 7 - 8 mm, inside threesquare 7 - 8 mm, double size 3 - 5 mm
Socket set chrome vanadium steel, „Profi“-quality GS-tested, black plastic case, 3/8”. Contents: 18 Sockets: 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 24 mm, 1 ratchet handle, 72 gears with quick release function, 1 universal joint, 1 sliding head for extension bar work as T handle, 2 spark plug sockets 16 & 21 mm, 3 extension bars 20 - 75 - 150 mm
Art. no. 110696
Art. no. 110676
26-pieces
kg 2,309
size 72 x 72
kg 0,059
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
191
Standard program
Pliers
...convincing solutions
2-component pliers Black Line
INFO 2-component pliers
2-component combination pliers DIN 5746 Industrial quality
Pliers range with 2-component handles made of highquality, non-slip, thermoplastic elastomer.
Chrome plated, cutting edges inductive hardened
alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chromium-plated, for soft wire and hard wire
Art. no. 210052 210053 210054
TL 165 185 205
soft 4,0 4,0 4,2
hard 2,0 2,2 2,5
kg 0,197 0,286 0,410
PU 1 1 1
2-component side cutters DIN 5749 alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chromium-plated, for soft wire and hard wire
slipping protection
slim shape for easy handling
Art. no. 210067 210068
TL 140 165
soft 4,0 4,0
hard 1,8 2,0
kg 0,172 0,237
PU 1 1
2-component heavy duty side cutters DIN 5749 alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chromium-plated, for soft wire and hard wire
reinforced handle for maximum cutting force
Art. no. 210157 210158
TL 175 205
soft 4,0 4,2
hard 2,7 3,0
kg 0,264 0,326
PU 1 1
2-component long flat nose pliers DIN 5745 alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chromium-plated
Art. no. 210313
194
kg Ø TL Ø
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
TL 160
c-hole Mat. TMA WS
kg 0,155
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1
2-component pliers Black Line 2-component long round nose pliers DIN 5745
2-component water pump pliers DIN 8976
alloyed carbon steel, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chromium-plated
chrome vanadium steel, forged and annealed, curved jaws, gripping chuck hardened, self-locking nut, finger protection, with 2 component plastic handle with hand protection, chromium-plated
Art. no. 210350
TL 160
kg 0,153
PU 1
Art. no. 210584
TL 240
2-component long chain nose pliers DIN 5745
2-component pliers set
with side cutter, straight, alloyed carbon steel, forged and annealed, cutting edges induction hardened, for soft wire and hard wire, with 2 component plastic handle with hand protection, chromium-plated
Contents: 1 compination pliers 180 mm 1 diagonal cutter 160 mm 1 long chain nose pliers 200 mm 1 wire stripping pliers 160 mm
Art. no. 210394 210396
TL 170 200
form gerade gerade
kg 0,154 0,253
PU 1 1
Art. no. 220128
4-pieces
kg 0,368
PU 1
kg 1,044
PU 1
kg 1,082
PU 1
Zangensatz 2-component long chain nose pliers DIN 5745 with side cutter, 45° angled nose, alloyed carbon steel, forged and annealed, cutting edges induction hardened, for soft wire and hard wire, with 2 component plastic handle with hand protection, chromium-plated
Contents: 1 compination pliers 180 mm 1 heavy duty diagonal cutter 180 mm 1 long chain nose pliers 200 mm 1 wire stripping pliers 160 mm
Art. no. 220129 Art. no. 210398
TL 200
form 45°
kg 0,251
4-pieces
PU 1
Water pump pliers chrome vanadium steel, forged and annealed, curved jaws, gripping chuck hardened, chromium-plated, dipped, setting at touch of a button, safe engaging
Wire stripping pliers DIN 7168 alloyed carbon steel C 45, forged and annealed, cutting edges induction hardened, with 2 component plastic handle with hand protection, chrome plated
Art. no. 210616 210617 210618 Art. no. 210644
TL 160
mm² 0,6-10
kg 0,196
TL 170 240 300
kg 0,185 0,330 0,545
PU 1 1 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
195
2-component ESD electronic pliers
INFO ESD Electronic pliers
ESD Electronic needle nose pliers, 45° angle Industrial quality
Advantages: • Elegant, ergonomically shaped, non-slip 2-component handle ensures comfortable and precise working • Special tool steel, forged and tempered, edges hardened (58 ± 2HRC) • Surface resistance 10.9 Ohm, in accordance with electronics area ESD • Each mechanism checked • precision pliers for meticulous assembly work for example in electronics and precision engineering • for picking up, holding and bending • model with electric discharging • precision hinges • smooth handle surfaces • low-friction double spring for smooth and steady opening • handles with two-coloured multi-component handle covers black/green • special tool steel Not only people, objects also experience electrostatic charging as a result of movement, friction and being handled. Such charging can lead to the destruction of endangered components. HAUPA ESD - electronics pliers discharge such energy slowly and in a controlled way.
Art. no. 211856
TL 130
45°
Art. no. 211858
TL 140
ESD Electronic thin needle nose pliers, 45° angle 45° angle, special tool steel
kg 0,091
PU 1
Art. no. 211860
TL 140
45°
ESD Electronic needle nose pliers, 45° angle
ESD Electronic thin needle nose pliers
with wire cutter, special tool steel
straight construction, special tool steel
Art. no. 211852
TL 130
kg 0,089
45°
PU 1
Art. no. 211862
TL 150
ESD Electronic needle nose pliers
ESD Electronic thin needle nose pliers, 45° angle
straight construction, special tool steel
45° angle, special tool steel
Art. no. 211854
kg Ø TL Ø
TL 130
Weight in kg Cross-section mm Total length Cross-section mm
kg 0,082
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
PU 1
PU 1
kg 0,083
PU 1
kg 0,084
PU 1
kg 0,087
PU 1
kg 0,087
PU 1
straight construction, special tool steel
with wire cutter, special tool steel
TL 130
kg 0,081
ESD Electronic thin needle nose pliers
ESD Electronic needle nose pliers
Art. no. 211850
196
45° angle, special tool steel
Art. no. 211864
Contents Blade length Diameter in mm² Strength
TL 150
c-hole Mat. TMA WS
45°
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
2-component ESD electronic pliers ESD Electronic flat nose pliers
ESD Electronic front cutter
Special tool steel
Special tool steel
Art. no. 211866
TL 130
kg 0,090
PU 1
Art. no. 211874
TL 115
ESD Electronic round nose pliers
ESD Electronic combination pliers
straight construction, special tool steel
with wire cutter, special tool steel
Art. no. 211868
TL 130
kg 0,091
PU 1
Art. no. 211876
TL 115
ESD Electronic side cutter
ESD Electronic pliers set
normal construction, head width 14 mm, special tool steel
Special tool steel Contents Art. No.: 211 862 211 870 211 874 211 876
Art. no. 211870
TL 115
kg 0,078
kg 0,093
PU 1
kg 0,077
PU 1
kg 0,585
PU 1
PU 1
ESD Electronic side cutters slim construction, head width 10 mm, special tool steel
Art. no. 211872
TL 110
Art. no. 211880
kg 0,075
PU 1
kg 0,075
PU 1
4-pieces
ESD Electronic side cutter without cutting-facet normal construction, head width 14 mm without chamfer, special tool steel
Art. no. 211875
TL 115
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
197
2-component electronic pliers
Special pliers
Microelectronic side cutters
Grip pliers
without cutting-facet, clearance angle: 50°, with clip, for soft wires up to 0.8 mm²
one jaw straight, one jaw movable, forged of chrome vanadium, a real universal plier for gripping any kind of workpiece, flat round or square, with quick-release lever
Art. no. 211708
TL 118
kg 0,069
PU 1 Art. no. 210556
Microelectronic side cutters without cutting-facet, clearance angle: 21°, with clip, for soft wires up to 1.3 mm²
TL 250
WS 0-40
kg 0,518
PU 1
Grip pliers jaws drop, forged of chrome vanadium, adjustable, quick-release lever, half-round jaws, with wire cutter
Art. no. 211720 211722
TL 132 158
kg 0,086 0,087
PU 1 1 Art. no. 210562
Tweezers special design for wafers, long, extra small blades, needle fine top ends, stainless steel, antimagnetism acid resistent
TL 250
WS 0-40
kg 0,565
PU 1
kg 0,798 0,800 2,460
PU 1 1 1
Pipe wrenches chrome vanadium steel, polished
Art. no. 211080
TL 130
kg 0,017
PU 1 Art. no. 210592 210594 210596
TL 320 435 560
WS -45 -59 -76
tube 1" 1 1/2" 2"
Riveting pliers made of aluminium-pressure casting, all inner parts made of special alloyed steel and hardened, with 4 exchangeable nozzles 2,4-3-4-5 mm, for blind rivets of aluminium-copper or steel
Art. no. 210770
TL 250
kg 0,552
PU 1
Riveting tool set in portable plastic box. Contents: 1 plier no. 21 07 70, 100 pieces of alu space rivets 4 mm Ø, short-middle-long, 2 twist drills and washers.
Art. no. 210776
198
kg Ø TL Ø
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
TL 250
c-hole Mat. TMA WS
kg 0,840
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1
Standard program
Accessories
...convincing solutions
Painters accessories Wire brushes
Deep hole marker Marker and writing implement with a refillable solid lead, suitable for all surfaces (including dusty, rough, damp or oily surfaces) cap in a bright signalling colour with integrated sharpener. Also suitable for dark surfaces
Art. no. 150002
TL 300
kg 0,131
PU 1
Water brushes real bristles, vulcanized, textile bound, bristles-Ø 24 mm, length of bristle 48 mm
Art. no. 150004
width 24
kg 0,036
PU 1
Art. no. 150025
kg 0,291
PU 1
kg 0,007
PU 1
blue yellow red
kg 0,017 0,017 0,016
PU 1 1 1
red blue yellow
kg 0,284 0,276 0,279
PU 1 1 1
blue yellow red
kg 0,059 0,061 0,060
PU 1 1 1
Carpenters‘ pencils
Plaster cups soft rubber
Art. no. 150090
Marking chalk Art. no. 150006
Ø 125
depth 90
height 90
kg 0,105
PU 1
Plaster pan metal, with wood handle Art. no. 150015 B 150015 G 150015 R Art. no. 150008
Ø 160
depth 40
height 40
kg 0,341
PU 1
Chalk in plastic bottles, 250 g
Paint scrapers steel, polished blade, with oval wooden handle
Art. no. 150024 150026 150028
TL 185 205 205
width 40 50 60
kg 0,043 0,051 0,047
PU 1 1 1
Art. no. 140510 140520 140530
Chalk line roller Squid, 15 m Chalk line roller made from cast magnesium with push system: Pressure on the axle does not turn the crank; hardened hook with curved spike; integrated storage for the hook, 150023: fast-retraction transmission 5:1
Chalk in bags
Art. no. 150018 BLAU 150018 150018 ROT Art. no. 150019 150023
200
kg Ø TL Ø
size 15 m 15 m
kg 0,291 0,291
Squid Fast Squid
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
PU 1 1 Contents Blade length Diameter in mm² Strength
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Cleaning wipes Industrial cleaning wipes HAUPA Industrial cleaning wipes are perfect for washing hands as well as cleaning tools and work surfaces. They remove stubborn dirt fast and efficiently such as grease, paint, oil, tar, ink, silicone, glue and much, much more making them the ideal companions for workshops, offices, home or for those on the go. These practical wipes have been impregnated with a solvent-free, industrial hand cleaner, which has been dermatologically tested and is also suitable for sensitive skin. The individually perforated wipes ensure easy extraction. The practical and solid storage container with lock-lid prevents the wipes from drying out. Contents: 40 wipes, each 17 x 25 cm. The must have for every cleaning job!
Effortlessly removes: • Grease • Paint • Oil • Tar • Ink • Silicone • Glue • and more…
Art. no. 150600
TL 170
width 250
kg 0,190
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
201
Soldering accessoires Soldering irons
Soldering stone
chrome nickel steel tube, with schuko safety plug, replaceable nickel-plated copper tips
Art. no. 160142 160144 160146
TL 265 315 320
Volt 220 220 220
Watt 60 80 100
kg 0,322 0,319 0,324
PU 1 1 1
Art. no. 160130
kg 0,070
PU 1
kg 0,073
PU 1
kg 0,054
PU 1
kg 0,072 0,132
PU 1 1
Soldering paste acc. to DIN 8511-F-SW 26 rosin halide-activated, field of application: electro-technic, electronics, manufacture of electrical appliances
Soldering irons with plastic handle, with schuko safety plug, replaceable copper tips, nickelplated
Art. no. 160090 Art. no. 160150
TL 250
Volt 220
Watt 30
kg 0,264
PU 1
Soldering fluid acc. to DIN 8511-F-SW 32 rosin halide-activated, field of application: electro-technic, electronics, manufacture of electrical appliances
Soldering irons soldering tip internally heated, chrome vanadium tube, with plastic handle, with schuko safety plug, replaceable nickel-plated copper tips, for electronic work
Art. no. 160092 Art. no. 160190
TL 200
Volt 220
Watt 15
kg 0,257
PU 1
Grease for soft soldering acc. to DIN 8511-F-SW 21 ammonium chloride, organic preparation, field of application: general soldering work
Soldering set Contents: • 1 Electric soldering Iron 80 Watt • 1 Hobbyists‘ solder 1 m • 1 Radio solder 1 m • 1 Soldering grease 20 g
Art. no. 160094 160096
Soldering grease for fittings acc. to DIN 8511-F-W 22 Art. no. 160234
Watt 80
kg 0,387
PU 1
field of application: sanitary technics, copper tubes etc.
Solder in triangular sticks DIN 1707 length approx. 430 mm, approx. 250 g per stick, size: 11 x 11 x 11 x 430 mm
Art. no. 160100
kg 0,080
PU 1
kg 0,065
PU 1
Soldering fluid acc. to DIN 8511-F-W 21 Art. no. 160112 160114 160116
Sn% 30 40 60
Roll/g 250 250 250
kg 0,275 0,247 0,232
PU 1 1 1
ammonium chloride, organic preparation, field of application: sanitary technics, copper tubes etc.
Art. no. 160102
202
kg Ø TL Ø
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Solder for electronic work Solder for electronic work acc. to DIN EN 29453
Fittings‘ solder acc. to DIN EN 29453
antimony-free, soldering flux acc. To DIN EN 29454, 1.1.2.B (F-SW 26), S-Sn60Pb40, rosin halide-activated
low antimony content, soldering flux acc. to DIN EN 29454, 2.1.3.B (F-SW 24), S-Pb60Sn40, ammonium chloride based, organically prepared
Art. no. 160020 160022 160024 160026 160028 160030 160042 160044 160046 160050 160052 160054
Ø 1 1 1 1 1,5 1,5 1,5 1,5 1,5 2 1 1
Sn% 60 60 60 60 60 60 60 60 60 60 60 60
Roll/g 100 250 500 1000 1m 100 250 500 1000 100 250 500
kg 0,104 0,253 0,529 1,008 0,016 0,106 0,247 0,528 1,022 0,108 0,250 0,529
PU 1 1 1 1 1 1 1 1 1 1 1 1
Art. no. 160070 160072 160074
Ø 1,5 2 2
Sn% 40 40 40
Roll/g 100 250
1m
kg 0,018 0,103 0,258
PU 1 1 1
kg 0,109 0,266
PU 1 1
Fittings‘ solder acc. to DIN 29453, solid S-Pb50Sn50 low antimony content
Art. no. 160080 160082
Ø 3 3
Sn% 50 50
Roll/g 100 250
Solder for electronic work acc. to DIN EN 29453 antimony-free, soldering flux acc. to DIN EN 29454, 1.1.2.B (F-SW 26), S-Sn60Pb40, rosin halide-activated
Art. no. 160000 160002 160004 160006 160008 160012 160014 160016 160018
Ø 1 1 1 1 1 1,5 1,5 1,5 1,5
Sn% 60 60 60 60 60 60 60 60 60
Roll/g 1m 100 250 500 1000 100 250 500 1000
kg 0,009 0,106 0,259 0,528 1,015 0,102 0,255 0,523 1,024
PU 1 1 1 1 1 1 1 1 1
Solder for electronic work acc. to DIN EN 29453 antimony-free, soldering flux acc. To DIN EN 29454, 1.1.2.B (F-SW 26), S-Pb60Sn40, rosin halide-activated
Art. no. 160060 160062
Ø 2 2
Sn% 40 40
Roll/g 100 250
kg 0,106 0,257
PU 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
203
Solder lead-free (RoHS-directive)
Steel stamps
Solder wire according to DIN EN 29453
Steel stamp, figures (0 - 9) DIN 1451
lead-free special alloy, 2.5% flux percentage according to DIN EN 29454, 1.1.2.B (EN-61190-ROLO), 1.00 mm of Ø, 0,100 kg spools S-Sn99Cu1, DIN EN 29453 (Sn99, 3Cu0,7 - eutectic)
Art. no. 160420 160422 160424 160426 160430 160442 160444 160446 160450 160452 160454
Ø 1 1 1 1 1,5 1,5 1,5 1,5 2 2 2
Sn% 99 99 99 99 99 99 99 99 99 99 99
Roll/g 100 250 500 1000 100 250 500 1000 100 250 500
kg 0,114 0,262 0,536 1,000 0,112 0,266 0,500 1,000 0,109 0,257 0,527
PU 1 1 1 1 1 1 1 1 1 1 1
Art. no. 130200 130201 130202 130203 130204 130206
size 3 4 5 6 8 10
set 0-9 0-9 0-9 0-9 0-9 0-9
kg 0,160 0,243 0,300 0,450 0,650 0,800
PU 1 1 1 1 1 1
kg 0,461 0,650 0,850 1,200 1,950 2,479
PU 1 1 1 1 1 1
Steel stamp, letters (A - Z), DIN 1451
Solder wire according to Din EN 29453 lead-free special alloy, 3.5% flux percentage according to DIN EN 29454, 1.1.3.B (EN-61190-ROLO), 1.00 mm of Ø, 0, 100 kg spools S-Sn99Cu1, DIN EN 29453 (Sn99, 3Cu0,7 - eutectic)
Art. no. 160402 160404 160406 160408 160412 160414 160416 160418
204
kg Ø TL Ø
Ø 1 1 1 1 1,5 1,5 1,5 1,5
Sn% 99 99 99 99 99 99 99 99
Weight in kg Cross-section mm Total length Cross-section mm
Roll/g 100 250 500 1000 100 250 500 1000
CW L W D
kg 0,114 0,250 0,500 1,000 0,114 0,258 0,535 1,000
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Art. no. 130208 130209 130210 130211 130212 130214
size 3 4 5 6 8 10
set A-Z A-Z A-Z A-Z A-Z A-Z
PU 1 1 1 1 1 1 1 1
Contents Blade length Diameter in mm² Strength
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Standard program
Chisels, Hammers
...convincing solutions
Chisels, centre punches, hatchets, hammers
Hammers
Flat chisels to DIN 6453 A, flat oval shank
Firmer chisels DIN 5139
chrome vanadium air hardenend steel, golden varnishes
with bevelled edges and polished wood handle and cutting edge protector
Art. no. 180008 180010 180012
CW 28 28 32
TL mat/S 200 23 250 23 300 26
mat/S1 13 13 13
kg 0,392 0,490 0,606
PU 1 1 1
Stone chisels, flat oval shank
Art. no. 180464 180466 180468 180470 180474
CW 14 16 18 20 24
BL 150 150 150 150 150
TL 280 280 280 280 280
kg 0,120 0,132 0,161 0,170 0,193
PU 1 1 1 1 1
kg 0,125
PU 1
kg 0,502
PU 1
kg 0,600
PU 1
kg 0,621
PU 1
chrome vanadium air hardenend steel, golden varnishes
Rubber hand guard total length 140 mm, max. Ø 90 mm, for chisels flat oval shank Art. no. 180042 180044
CW 28 32
TL mat/S 250 20 300 23
mat/S1 12 13
kg 0,394 0,584
PU 1 1
Stone chisels, octagonal shank Art. no. 180110
chrome vanadium air hardenend steel, golden varnishes
Art. no. 180062 180064
CW 28 30
TL mat/S 250 16 300 18
mat/S1 16 18
kg 0,387 0,595
PU 1 1
size mat/S 3 23
mat/S1 13
Pin punch set golden varnishes, in folding metal case
Jointing chisel chrome vanadium air hardenend steel, golden varnishes, for light works, the wide and flat cutting edge allows a quick working and avoid a breaking out of the wall
Art. no. 180076
CW 26
TL mat/S 250 26
mat/S1 7
kg 0,302
PU 1
Stone chisels, octagonal shank
CW 14 16
TL mat/S 250 14 300 16
3 - 4 - 5 - 6 - 8 - 10 mm
Household hatchet
chrome vanadium air hardenend steel, golden varnishes
Art. no. 180082 180084
Art. no. 180170
varnished and polished cutting edge, DIN 5131
mat/S1 14 16
kg 0,358 0,573
PU 1 1 Art. no. 180173
Electricians’ chisels chrome vanadium air hardenend steel, golden varnishes
Claw hammer Art. no. 180090 180092 180094
CW 8 10 12
TL mat/S 200 6 250 8 250 8
mat/S1 6 8 8
kg 0,052 0,119 0,121
PU 1 1 1
American model, 16 Oz, wood handle
Centre punch to DIN 7250 octagonal shank, chrome vanadium air hardenend steel, golden varnishes
Art. no. 180120
206
kg Ø TL Ø
TL 120
Ø 12
Weight in kg Cross-section mm Total length Cross-section mm
kg 0,091
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Art. no. 180321
size 16
PU 1
Contents Blade length Diameter in mm² Strength
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Hammers and handles Claw hammer
Double faced sledges to DIN 6475
American model, 16 Oz, fibre glass handle
with steel pipe handle and rubber grip
Art. no. 180323
size 16
kg 0,748
PU 1
Engineers‘ hammer DIN 1041
HW 200 300 400 500
HW 1000 1250
kg 1,210 1,504
PU 1 1
kg 1,093 1,375
PU 1 1
kg 0,328 0,460
PU 1 1
kg 0,470 0,890 0,103
PU 1 1 1
kg 0,115 0,115
PU 1 1
Siedge hammer to DIN 6475
with polished hickory handle, with steel handle protection
Art. no. 180182 180184 180186 180188
Art. no. 180290 180292
with polished hickory handle, with steel handle protection
kg 0,238 0,370 0,470 0,622
PU 1 1 1 1
Art. no. 180300 180302
HW 1000 1250
Plastic hammer Engineers‘ hammer DIN 1041
with replaceable cellidor striking faces and ash handle
with steel pipe handle and rubber grip
Art. no. 180200 180202
HW 300 500
kg 0,552 0,740
PU 1 1
Art. no. 180334 180346
Ø 32 replacement heads
Hammer handles to DIN 5111 B ash wood, black varnishes
Engineers‘ hammer DIN 1041 with red ultramid handle, low vibration
Art. no. 180372 180374 180378 Art. no. 180232
HW 300
kg 0,410
PU 1
180182 180184 180188
Sledge handles to DIN 5135 A ash wood, black varnishes
Engineers‘ hammer english pattern, ball pin
Art. no. 180390 180392 Art. no. 180274 180276
HW 340 450
kg 0,416 0,485
180300 180302
PU 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
207
Files Warding files DIN 7283 Set: 6 files with wooden handle, section A, B, C, D, E, F in plastic wallet
Art. no. 190120
TL 100
kg 0,108
PU 1
kg 0,078
PU 1
kg 0,784 0,799
PU 1 1
Contact files Set: 6 files in plastic wallet
Art. no. 190126
TL 130
Files assortment Set: 5 files in plastic wallet, files with plastichandle round square flat half round triangular
Art. no. 190130 190132
208
kg Ø TL Ø
TL 100 200
bastard cut 1 smooth cut 3
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Standard program
Knives
...convincing solutions
Cable knives Cable stripping or lead tube knives
Cable stripping knives
with wooden handle
with wooden scales, blade, reamer and screwdriver
Art. no. 200008
BL 40
kg 0,047
PU 1
Cable stripping knives
Art. no. 200016
solid handle, shock-proof synthetic, blade with straight and rounded scraper
BL 60
type 3
kg 0,089
PU 1
kg 0,092
PU 1
Cable stripping knives with plastic scales, 2 blades, reamer and screwdriver
Art. no. 200010
BL 60
type 1
kg 0,073
PU 1
Cable stripping knives
Art. no. 200018
with black plastic scales, stainless blade with scraper
BL 60
type 4
Utility knives manufactured from zinc di-cast, with 4 straight blades and 1 hook blade
Art. no. 200011
BL 60
type 1
kg 0,082
PU 1
Cable stripping knives
Art. no. 200026 200028 200030
BL TL 20 145 hook blade straight blade
kg 0,192 0,004 0,005
PU 1 1 1
with wooden scales, blade with scraper
Utility metal knives Cutting of plastic, wallpaper, cardboards, leather, plywood, carpets, with automatic blades locking, reserve blade in the handle
Art. no. 200012
BL 60
type 1
kg 0,079
PU 1
Cable stripping knives
Art. no. 200025 200025/KL
BL 25
kg 0,072 0,050
spare blades
PU 1 1
Utility metal knives
with wooden scales, blade and reamer
Cutting of plastic, wallpaper, cardboards, leather, plywood, carpets, with automatic blades locking, reserve blade in the handle
Art. no. 200014
210
kg Ø TL Ø
BL 60
Weight in kg Cross-section mm Total length Cross-section mm
type 2
CW L W D
kg 0,078
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
PU 1
Art. no. 200027 200032
Contents Blade length Diameter in mm² Strength
BL 25
kg 0,150 0,054
spare blades
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1 1
Saws, saw blades Utility knives „EXTRA“ with spare blades
Junior hacksaw
Cutting of plastic, wallpaper, cardboards, leather, plywood, carpets, with automatic blades locking, reserve blade in the handle
strong frame, nickel-plated
Art. no. 200280 Art. no. 200051
BL 25
kg 0,022
PU 1
type metal
Sbl. 150
kg 0,149
PU 1
kg 0,069
PU 1
kg 0,164
PU 1
kg 0,100
PU 1
kg 0,119
PU 1
Junior hacksaw DIN 6473 C h hacksaws blade for metal
Tin snips, tube cutters, saws Art. no. 200284
Hole-cutting tin snips with polished blade, carbon steel, figure cuts (large radii)
type metal
Sbl. 150
Junior hacksaw heavy type, with pistol type handle and hacksaw blade for metal, form A
Art. no. 200140
TL 250
kg 0,523
PU 1 Art. no. 200285
Figure tin snips with polished blade, carbon steel, right-hand cutting, for short straight and figure cutting (small radii)
type metal
Sbl. 150
Hand saw „PUK“ with hacksaws blade for metal, with fixed, varnished wooden handle
Art. no. 200154
TL 260
kg 0,513
PU 1
Art. no. 200290
type metal
Sbl. 150
Small tube cutter
Hand saw „PUK“
with 1 cutting wheel and dual roller guides Ø 1/8“ - 5/8“
with adjustable, varnished wooden handle, in plastic bag
Art. no. 200292 Art. no. 200190 200192
Ø 3-16 3-16
loose spare wheels
kg 0,107 0,025
PU 1 1
type metal
Sbl. 150
Hacksaw „PUK“ acc. to DIN 6494C, for Art. No. 20 02 92, 20 02 80, 20 02 90, 20 02 84, 22 02 85, 11 05 58
Tube cutter with 1 cutting wheel and dual roller guides, retractable burr remover, Ø 1/8“ - 1 3/8“ Art. no. 200286 200288 Art. no. 200194 200196
Ø 3-35 3-35
loose spare wheels
kg 0,401 0,006
type wood universal
Sbl. 150 150
kg 0,036 0,036
PU 1 1
PU 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
211
Saws, saw blades
LED lamps/torches
Hacksaw frame
Mini torch
steel pipe with flat oval section, bright chrome-plated, tension bolt made from steel, form A
High-performance mini LED torch, great illumination performance despite the minimalist dimensions. Includes 1 x AAA battery, wrist strap and nylon bag with belt loop, in blister packaging
Art. no. 200304
type metal
Sbl. 300
kg 0,408
PU 1 Art. no. 130300
Hacksaw blades to DIN 6494
type metal
kg 0,080
PU 1
Focus torch
type A, single sided blade HSS-Bi-metal
Art. no. 200310
TL 18 x 91
High-performance LED torch with adjustable focus ensuring the ideal cone of light at all times. Includes 3 x AAA batteries, storage in a nylon bag with belt loop, in blister packaging
Sbl. 300
kg 0,016
PU 1
Art. no. 130302
TL 34 x 104
kg 0,200
PU 1
kg 0,440
PU 1
Battery-powered torch High-performance LED torch, with an extreme illumination range. Includes rechargeable battery with high performance (2600 mAH) and charger, nylon bag with belt loop, in blister packaging
Battery charger
Art. no. 130304
TL 46 x 151
Rotating head lamp High-performance LED head lamp, ideal combination of weight and illumination performance, head can be rotated through 90 degrees. Includes 3 x AAA batteries, nylon bag with belt loop, in blister packaging
HAUPA high-performance LED lamps/torches for daily work use Extremely high illumination performance with minimum battery load thanks to highly modern CREE LED bulbs
Art. no. 130306
212
kg Ø TL Ø
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
TL 63 x 55 x 62
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
kg 0,180
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1
Standard program
Tool cases
...convincing solutions
Assortment boxes, wallets
Leather tool cases
Assortment box (Polypropylene)
Tool case „Tradition“ and „Fan“
Features: Ideal for small parts – the lighter and reliable alternative to sheet steel bulk storage chests. Equipped with removable boxes thus allowing individual division. U-profiles in the cover and grids in the bottom of the box prevent unwanted slipping and allow stacking of several bulk storage chests. Dimensions: W = 420 x D = 350 x H = 60 mm, colour: black/red. Material: Bulk storage chest from polypropylene with transparent cover, rounded edges, ergonomic carrying handle and rigid snap closures.
made of black leather, with 2 inside loops and 2 snap-locks. 22 00 22: Tradition 22 00 24: Fan
Art. no. 220022 220024
width 340 370
depth 110 115
height 170 255
kg 0,821 1,669
PU 1 1
Tool case „Achat“
Art. no. 220131
width 420
depth 335
height 65
kg 1,200
PU 1
Tool wallets
made of black leather, all outside edges reinforced with Alu-squares, with galvanized floor-onsert of sheet-metal collapsable front, snap-fasteners riveted on side, side-loops for carrying-belts, 2 snap-locks, all 4 inside with toolcompartments and adjustable loops, without carrying belts
Art. no. 220052
of black linen, with leather strap fastening
width 420
depth 165
height 320
kg 3,113
PU 1
kg 2,126 2,990 2,378
PU 1 1 1
kg 3,939
PU 1
Tool case „Favorit - Admiral - Profi“ made of black leather, with galvanized floor-onsert of sheet-metal collapsable front, with locks, side-, front-, rear-parts as well as bottom and cover reinforced, inside with tool-compartments and adjustable loops, without carrying belts.
Art. no. 220006
width 600
depth 310
kg 0,452
PU 1
22 00 60: Favorit 22 00 64: Admiral 22 00 66: Profi
Art. no. 220060 220064 220066
width 365 470 420
depth 150 145 150
height 250 315 250
Tool case „Comet“ made of black leather, all outside edges reinforced with Alu-squares, with galvanized floor-onsert of sheetmetal collapsable front, snap-fasteners riveted on side, side-loops for carrying-belts, 2 snap-locks, all 4 inside with tool-compartments and adjustable loops, without carrying belts
Art. no. 220070
214
kg Ø TL Ø
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
width 420
c-hole Mat. TMA WS
depth 165
height 320
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Leather tool cases Tool case „Start“
Tool case „Saphir“
Tool case for apprentices, made from black cow hide equipped with 20 tools. Case 22 00 60.
Tool case for electrical contractor, made of green neat’s leather, with 31 tools. Case 22 00 70.
Contents: • 2C telephone pliers, 200 mm • 2C combination pliers, 180 mm • 2C side cutters, 160 mm • 2C wire stripping pliers, 160 mm • 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm • 2C-VDE cross slotted screwdrivers PH, size 1 and 2 • Cable knife, 1-piece • PUK pocket saw, fixed handle • Brush • Electricians’ chisel, 10 x 250 mm • VDE/GS Voltage tester - blade 50 mm • Stone chisel, 300 mm • Engineers’ hammer, 300 g • Double-face sledge hammer, 1000 g • Spatula, 40 mm • Plaster container
Contents: • 2C long-nosed round pliers, 160 mm • 2C telephone pliers, 200 mm • 2C combination pliers, 180 mm • 2C side cutters, 160 mm • 2C wire stripping pliers, 160 mm • 2C water pump pliers, 240 mm • ESD elektronic side cutters, 115 mm • 2CE electrician‘s screwdrivers 2.5 x 75, 4 x 100, 4 x 125, 5 x 150 m • 2C engineers’ screwdrivers 6 x 100, 7 x 125, 8 x 150 mm • 2C cross slotted screwdrivers PH, size 1 and 2 • 2C cross slotted screwdrivers PZ, size 1 and 2 • Electronic screwdriverset, 7-pieces • Socket wrenches SW 5.5, 13, 17 • Allen key set, 8-pieces • Cable stripper hooked blade, 8 - 28 mm Ø • Combination snips 190 mm • „PUK“ pocket saw, fixed handle • Bench hammer 400 g • Folding rules 2 m • Cable cutter max. 16.9 mm • Cable stripping knife plastic scales • Voltage tester VDE/GS
Art. no. 220168
empty 220060
20-pieces
kg 6,100
PU 1
Tool case „Alpha“
Art. no. 220154
Tool case made from black neat‘s leather, equipped with 19 tools. Case 22 00 60. Contents: • 2C combination pliers, 180 mm • 2C side cutters, 160 mm • 2C telephone pliers, 200 mm • 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm • 2C-VDE cross slotted screwdrivers PH, size 1 and 2 • Voltage tester VDE/GS • Wire stripping pliers, 0.5 - 4 mm² • Cable stripper hooked blade, 8 - 28 mm Ø • Cable knife, 1-pieces • PUK pocket saw, fixed handle • Electricians’ chisel, 10 x 250 mm • Stone chisel, 250 mm • Engineers’ hammer, 300 g • Measuring Tape, 3 m • Cabinet Level, 250 m
Art. no. 220169
empty 220060
19-pieces
kg 5,200
empty 220070
31-pieces
kg 8,150
PU 1
Tool case „Novelle 1“ Tool case for electrical contractor, made of black neat’s, leather, with 26 tools. Case 22 00 66. Contents: • 2C combination pliers, 180 mm • 2C side cutters, 160 mm • 2C heavy duty side cutters, 180 mm • 2C telephone pliers, 200 mm • 2C telephone pliers, 200 mm, bent • 2C water pump pliers, 240 mm • 2C wire stripping pliers, 160 mm • 2C electrician‘s screwdrivers, 75, 125, 150 mm • 2C engineers’ screwdrivers, 100, 150 mm • 2C cross slotted screwdrivers PH, size 1 and 2 • 2C cross slotted screwdrivers PZ, size 1 and 2 • Cable stripper hooked blade, 8 - 28 mm Ø • Reamer square • Cable stripper 0.5 - 4 Ø • Painter scrapers • Bench hammer 300 g • Cable stripping knife plastic scales • Combination snips 140 mm • „PUK“pocket saw, adjustable handle • Voltage tester “Basic” • Voltage tester VDE/GS
PU 1 Art. no. 220152/1
empty 220066
26-pieces
kg 6,500
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
215
Leather tool cases
Backpacks, Nylonbags
Tool case „Phoenix“
Backpack
Tool case for electrical contractor, made of black neat’s leather, with 39 tools. Case 22 00 70.
Tool backpack not only for the trainee, base shell rubber reinforced, double cross seam for high load. Material: extra strong 600D polyester, watertight and dirtrepellent, colour: black/green.
Contents: • 2C long flat nose pliers, 160 mm • 2C telephone pliers, 200 mm • 2C combination pliers, 180 mm • 2C side cutters, 160 mm • 2C wire stripping pliers, 160 mm • 2C water pump pliers, 240 mm • ESD electronic side cutters, 115 mm • ESD electronic needle nose pliers, 130 mm • Crimping pliers multi insulated and non-insulated crimping terminals • 2C engineers’ screwdrivers 100, 125, 150 mm • 2C electrician‘s screwdrivers 2.5 x 75, 4 x 125, 5 x 150, 5 x 175 mm • 2C cross slotted screwdrivers PH, size 0, 1 and 2 • 2C cross slotted screwdrivers PZ, size 1 and 2 • Electronic screwdriverset, 7-pieces • 2C socket wrenches, 5.5, 12, 17 • Reamer, round • Allen key set, 8-pieces • Adjustable wrench, 340 mm • Cable stripper hooked blade, 8 - 28 mm Ø • Combination snips, 190 mm • PUK“ pocket saw, fixed handle • Electrician‘s chisel, 10 x 250 mm • Folding rules, 2 m • Light metal spirit level, 400 mm • Bench hammer, 300 g • Cable cutter, max. 16.9 mm • Cutter knife, plastic • Cable stripping knife, plastic scales • VDE/GS voltage tester 125 - 250 V
Art. no. 220156
empty 220070
Art. no. 220275
PU 1
PU 1
Art. no. 220278
empty 220275
22-pieces
kg 6,660
PU 1
kg 0,102
PU 1
HAUPA Tool belt “Tool Pouch” 7 pockets to keep your tools handy with hammerloop and tapeholder belt loop with strong snap-button for easy attachment to belt. Material: extra strong 600D polyester
size 30 40
kg 0,085 0,135
PU 1 1
Art. no. 220103
width 150
depth 30
height 260
HAUPA Tool bag „Tool Pouch“
Carrying belts
7 pockets to keep your tools handy with hammerloop and tapeholder belt loop with strong snap-button for easy attachment to belt. Material: extra strong 600D polyester.
with 2 spring hooks
Art. no. 220054
kg 0,114
PU 1
Contents: • 2C combination pliers • 2C electricians’ screwdriver • 2C cross slotted screwdriver PH • Cable stripper, manual • VDE/GS voltage tester
Art. no. 220506
216
kg 1,880
Contents: • 2C-Combination pliers 180 mm • 2C-Side cutters 160 mm • 2C-Telephone pliers 160 mm • 2C-Wire stripping pliers 160 mm • 2C-VDE electricians’ screwdriver set, 6 pcs. • Voltage tester 100-250 V • Water brush • Plaster cup • Paint scraper, 40 mm • Carpenters’ pencil • Stone chisel, 32x300 mm • Electricians’ chisel, 10x250 mm • Engineers’ hammer, 300 g • Sledge hammer, 1000 g • Cable knife, 1 blade • PUK pocket saw, fixed handle • Wire stripper, hooked blade, 8-28 mm Ø
body made from a solid brass block, hardenend steel shackle, with 2 keys
kg Ø TL Ø
height 380
Tool backpack not only for the trainee, base shell rubber reinforced, double cross seam for high load.
Brass pad locks
Art. no. 220110 220112
depth 170
Backpack „Basic“
kg 9,900
39-pieces
width 420
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
empty 220103
c-hole Mat. TMA WS
kg 0,789
5-pieces
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1
Nylonbags HAUPA Belt bag “Tool belt”
HAUPA „Tool bag“
8 compartments for your tools, reinforced main compartment, steel rivets for high reliable quality. Big front compartment for nails or measurement tape, hammer sleeve, fits up to 135 cm hips, material: extra strong 600D polyester, colour: green, black
Tool bag with inner and outer tool compartments, rubber-reinforced base. Comes complete with 22 tools. Features: Waterproof and dirt resistant, rubber-reinforced base, double cross-seam for heavy loads, removable shoulder strap, adjustable, 10 compartments inside/outside (various sizes), belt for spirit level (outside), material: extra strong 600D polyester, colour: green, black. Tool bag 22 00 61.
Art. no. 220105
width 200
depth 100
height 300
kg 0,326
PU 1
HAUPA Tool belt „Standard“ 8 compartments for your tools, reinforced main compartment, steel rivets for high reliable quality. Big front compartment for nails or measurement tape, hammer sleeve, fits up to 135 cm hips. Material: extra strong 600D polyester, colour: green, black Contents: • 2C combination pliers 200 mm • 2C side cutters 160 mm • 2C electrician’s screwdriver • 2C cross slotted screwdrivers PH, size 1 and 2 • Engineers’ hammer, 300 g • Cable stripping knife, 1-piece • Measuring tape, 3 m
Art. no. 220213
empty 220105
Art. no. 220500
depth 190
height 280
PU 1
PU 1 Art. no. 220095
Tool bag with inner and outer tool compartments, rubber-reinforced base. Waterproof and dirt resistant, rubber-reinforced base, double cross-seam for heavy loads, removable shoulder strap, adjustable, 10 compartments outside (various sizes), 10 compartments inside (various sizes), belt for spirit level (outside), material: extra strong 600D polyester, colour: green, black
width 320
kg 6,350
22-pieces
very big box look alike Tool bag, easy approach to the tools, inside and outside compartments for tools, reinforced handles, material: extra strong 600D polyester, colour: green, black
Tool cases „Tool bag“
Art. no. 220061
empty 220061
HAUPA “Big Box”
kg 2,222
8-pieces
Contents: • 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm • 2-VDE cross slotted screwdrivers PH, size 1 + 2 • 2C combination pliers, 200 mm • 2C side cutters, 160 mm • 2C telephone pliers, straight • 2C wire stripping pliers, 160 mm • Voltage tester • Water brush • Paint scraper, 40 mm • Electrician’s chisel, 10 x 250 mm • Stone chisel, 300 mm • Engineers’ hammer, 300 g • Sledge hammer, 1000 g • Plaster container • Wire stripper, hooked blade, 8 - 28 mm Ø • Cable knife, 1 blade • PUK pocket saw, fixed handle • Carpenter’s pencil
kg 1,507
width 410
depth 240
height 320
kg 1,937
PU 1
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
217
Nylonbags HAUPA „Trend Box Plus“
HAUPA „Trend Box“
Tool bag for professional use. With inside and outside pockets, easy access to the tools, inside and outside compartments for tools, reinforced handles, material: extra strong 600D polyester, colour: green, black. Big box 22 00 95.
Tool bag for professional use. With inside and outside pockets, including 20 tools, easy approach to the tools, inside and outside compartments for tools, reinforced handles, material: extra strong 600D polyester, colour: green, black.
Contents: • 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm • 2-VDE cross slotted screwdrivers PH, size 1 + 2 • 2C combination pliers, 180 mm • 2C telephone pliers, 200 mm • 2C side cutters, 160 mm • 2C water pump pliers, 240 mm • 2C wire stripping pliers, 160 mm • Bit-Box, 17-pieces • Voltage tester „Basic“ • Allen keys set, 7-pieces • Adjustable single-head wrench • Chalk - blue • Impact cord roller • Carpenters’ pencil • Engineers’ hammer 300 g • Cable stripping knive • Junior hacksaw, heavy 150 mm • Cable cutters 160 mm insulatet • Combi-Drillbox • Spanners for switch-cabinets • Folding rule, fibre glass, 2 m
Contents: • 2C combination pliers, 200 mm • 2C side cutters, 160 mm • 2C telephon pliers, straight, 200 mm • 2C water pump pliers, 240 mm • VDE screwdrivers set, 6 electricians’ screwdrivers • Cable ties, 292 x 3,6 mm • Cabinet spirit level • Filling knife, 40 mm • Electrician’s chisel, 10 x 250 mm • Voltage tester, VDE/GS • Fitter’s hammer, 300 g • Universal stripper • Measuring tape, 3 m • PUK pocket saw, fixed handle • Carpenters pencil
Art. no. 220550
Art. no. 220556
218
kg Ø TL Ø
empty 220095
kg 6,430
25-pieces
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
empty 220095
kg 5,540
20-pieces
PU 1
Contents Blade length Diameter in mm² Strength
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1
Belts and jackets
Jackets
Tool belts
HAUPA „Tool Jacket“
10 compartments to organize your tools, hammer sleeve and tapeholder belt loop for easy attachment to belt, materials: extra strong 600D polyester, colour: black/green
Tool jacket for quick access to your tools. Quick assembly with strong zip, inside and outside pockets, particularly suitable for use in hot temperatures. Colour: green, black, width 500 mm, height 580 mm. Non-slip shoulder belt, breathable inside net, 2 document holders at back, 5 screwdriver pockets (with rubber adjustment), 1 pen pocket, 1 mobile phone pocket (Velcro®), 1 shear pocket (with rubber adjustment), 2 pliers pockets (pushbutton fastener), 1 voltage detector pocket (Velcro®), 1 pocket for small parts (Velcro®), hammer loop.
Art. no. 220224
width 880
height 280
empty
kg 0,350
PU 1
Tool belt „Basic“ 10 compartments to organize your tools, hammer sleeve and tapeholder belt loop for easy attachment to belt, materials: extra strong 600D polyester, colour: black/green. Contents: • 2C-VDE-Electricians’ screwdriver 5,5x125 mm • 2C-VDE-Electricians’ screwdriver 3x100 mm • 2C-VDE-Cross slotted screwdrivers PH 2 • Measuring tape 3 m • 2C-Combination pliers 180 mm • 2C-Side cutters 160 mm • VDE/GS Voltage tester 125-250 V • Utility metal knive • Wire stripper, hooked blade, 8-28 mm Ø • Cable cutter with stripping function
Art. no. 220053
Art. no. 220280
Contents: • 2C-VDE electrician’s screwdriver with PZ/FL profile • 2C-VDE electrician’s screwdrivers, 75, 10, 125 mm • 2C cross slotted screwdriver, PH, 80 mm • 2C electrician’s scissors • Combination pliers VDE • Diagonal cuttter VDE • Voltage tester “Basic” • Engineer’s hammer 300 g
empty 220224
10-pieces
width 500
height 580
empty
kg 0,764
PU 1
HAUPA „Tool Jacket“ Tool jacket for quick access to your tools. Tool jacket for fitters including 10 tools. Quick assembly with strong zip, inside and outside pockets, particularly suitable for use in hot temperatures. Colour: green, black, width 500 mm, height 580 mm. Non-slip shoulder belt, breathable inside net, 2 document holders at back, 5 screwdriver pockets (with rubber adjustment), 1 pen pocket, 1 mobile phone pocket (Velcro®), 1 shear pocket (with rubber adjustment), 2 pliers pockets (pushbutton fastener), 1 voltage detector pocket (Velcro®), 1 pocket for small parts (Velcro®), hammer loop.
kg 2,120
PU 1
Art. no. 220560
empty 220053
10-pieces
kg 2,700
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
219
Hard-top tool cases Tool case „Start up“ empty
Network service case HAUPA
Hard-top case, black, 2 tool kits, document pocket with hook-and-loop fixing, combination lock, bottom half of case equipped with variable partitions, shoulder strap
Hard-top case, black, for electricians and network technicians, 2 tool kits (one with document pocket), bottom half of case contains 8 small removable boxes, secured for transport purposes
Art. no. 220031
width 500
depth 210
height 430
kg 6,740
PU 1
Art. no. 220073
width 460
depth 160
height 310
kg 4,661
PU 1
Tool case „Aktion“ 2 tool kits (one with document pocket). Ground bowl with variables to dividing bars
Tool case trolly rigid case, made of ABS-plastic material, black, integrated rolls and pull-out handle in the bottom, locks of alu-press-casting, empty. Inside: 1 separation for documents, 1 plate for tools, 1 cover-plate with pocket compartments and clip-compartment, 1 bottom-tray
Art. no. 220038
width 460
depth 160
height 310
kg 4,580
PU 1
Tool case „Omega“ rigid case, black, 28 compartments, 1 combination lock, 1 separation for documents, 2 plate for tools, 2 lockable locks, ground bowl with variables to dividing bars, running around push border
Art. no. 220023
width 460
depth 160
height 310
kg 6,740
PU 1
kg 5,320
PU 1
Tool case trolly „Fly“ hard-side case, black, 3 tool sections, 2 locks, document pocket, with high-grade fittings, bottom half of case equipped with variable partitions Art. no. 220068
width 460
depth 180
height 310
kg 5,039
PU 1
Tool case „Merkur“ rigid case, made of ABS-plastic material, black, empty, excellent rib-profile on the outside, high-quality locks, inside with separation for documents, 2 plates with compartments for several tools, 1 tray of ABS-plastics with separations for individual divisions
Art. no. 220034
220
kg Ø TL Ø
width 460
depth 180
Weight in kg Cross-section mm Total length Cross-section mm
height 310 CW L W D
kg 5,320 Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
PU 1
Art. no. 220248
Contents Blade length Diameter in mm² Strength
width 470
c-hole Mat. TMA WS
depth 360
height 220
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Hard-top tool cases Tool case „Basic“
Network-Servicecase
Hard-top case, black, 2 tool kits (one with document pocket), bottom half of case equipped with variable partitions, 19 tools. Case 22 00 38 (460 x 160 x 310 mm).
Hard-top case, black, for electricians and network technicians, 2 tool kits (one with document pocket), bottom half of case contains 8 small removable boxes, secured for transport purposes. Case 22 00 73 (21 pieces).
Contents: • 2C-VDE electrician‘s screwdrivers, 2.5 x 75, 4 x 100, 5.5 x 125, 6.5 x 150 mm • 2-VDE cross slotted screwdrivers PH, size 1 and 2 • 2C combination pliers, 180 mm • 2C side cutters, 160 mm • 2C telephone pliers, straight, 200 mm • 2C wire stripping pliers, 160 mm • Wire stripper, hooked blade, 8 - 28 mm Ø • Cable knife, 1-pieces • Engineers’ hammer, 300 g • PUK pocket saw, fixed handle • Electricians’ chisel, 10 x 250 mm • Voltage tester blade, 50 mm • Measuring stick, 2 m • Paint scraper, 40 mm • Water brushes
Contents: • 2C side cutters, 160 mm • 2C telephone pliers, 180 mm • 2C telephone pliers, 200 mm, bent • 2C electrician screwdrivers 75, 100, 150 mm • 2C cross slotted screwdrivers PH, size 0, 1, 2 • Electronic screwdriver set, 7-pieces • Control cabinet key • Precision stripper “PWS-Plus” 0.25 - 0.8 Ø • Combination snips 190 mm • „PUK“ pocket saw, fixed handle • Crimping pliers for coaxial connectors • ESD electronic side cutters, 130 mm • Stripper for coaxial cable • VDE/GS voltage tester • Stripper for UTP/STP data cable • Crimping pliers for modular plugs • Sensor tool
Art. no. 220153
empty 220038
19-pieces
kg 6,600
PU 1
Art. no. 220141
empty 220038
21-pieces
kg 8,800
PU 1
Tool case “Start-up” Network service case „Connect”
Hard-top case, black, 2 tool kits, document pocket with hook-and-loop fixing, combination lock, bottom half of case equipped with variable partitions, shoulder strap, 19 tools. Contents: • 2C-VDE electrician‘s screwdrivers 2.5 x 75, 4 x 100, 5.5 x 125 und 6.5 x 150 mm • 2C-VDE cross slotted screwdrivers, PH, size 1 + 2 • 2C combination pliers, 185 mm • 2C side cutters, 165 mm • 2C telephone pliers, 200 mm • 2C wire stripping pliers, 160 mm • Wire stripper, hooked blade, 8 - 28 mm Ø • Cable knife, 1-pieces • Engineers’ hammer, 300 g • PUK pocket saw, fixed handle • Electricians’ chisel, 10 x 250 mm • Paint scraper, 40 mm • Voltage tester, blade 50 mm • Measuring tape, 3 m • Water brush
Art. no. 220221
empty 220031
19-pieces
kg 9,180
PU 1
The perfect Starter package for data and network. Hart-top case, black, 2 tool kits, bottom half of case contains removeable boxes, 13 tools. Case 22 00 73. Contents: • 2C electrician screwdrivers 2.5 x 75, 3 x 100, 4 x 125 mm • 2C cross slotted screwdrivers PH, size 1 and 2 • Electronic screwdriverset, 7-pieces • Stripper for UTP/STP data cable • 2C side cutters 160 mm • 2C telephone pliers, bent, 200 mm • ESD electronic side cutters, 115 mm • Sensor tool • Crimping pliers for modular plugs • 2C soft-grip scissors, 140 mm
Art. no. 220150
empty 220073
13-pieces
kg 5,600
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
221
Hard-top tool cases Tool case „Akkurat“
Tool case „Diamant“
Master‘s case for radio and television, with 32 tools, rigid case. Case 22 00 68.
Master‘s case for domestic appliances, with 23 tools, rigid case, black. Case 22 00 68.
Contents: • 2C combination pliers, 160 mm • 2C side cutters, 160 mm • 2C telephone pliers, straight, 200 mm • 2C telephone pliers, bent, 200 mm • 2C wire stripping pliers, 160 mm • ESD electronic side cutters, 115 mm • ESD electronic needle nose pliers, 130 mm • ESD Electronic round nose pliers, 130 mm • ESD electronic needle nose pliers, 130 mm, 45° • Engineers’ screwdrivers, 8 x 150 mm • 2C cross slotted screwdrivers, PH, size 1 and 2 • 2C electrician‘s screwdrivers 2.5 x 75, 4 x 100, 4 x 125, 5 x 150 • 2C electrician‘s screwdrivers 2.5 x 75 (bare) • Elektronic screwdriver set, 7-pieces • Tweezer, straight, 130 mm • Tweezer, flat, 145 mm • 2C socket wrenches 5, 5.5, 6 • 2C piercing awl, round • Voltage tester 50 - 250 Volt • Checking mirror 210 mm • Claw holder, size 525 • Spanner, 175 mm • Solder, Sn 60% 1 mm 100 g • Contact file set. 6 pieces • Universal scissors, 190 mm • Crown scissors, 115 mm
Contents: • 2C cross slotted screwdrivers, PH, size 1 and 2 • 2C electrician‘s screwdrivers 4 x 100, 5 x 150 mm • 2C engineers’ screwdrivers 6 x 100, 8 x 150 mm • 2C long nose round pliers, 160 mm • 2C long nose flat pliers, 160 mm • 2C telephone pliers 200 mm • 2C telephone pliers, bent, 200 mm • 2C combination pliers 160 mm • 2C side cutters, 160 mm • 2C heavy duty side cutters, 200 mm • Cable stripper 0.5 - 4 Ø • ESD electronic side cutters, 115 mm • Crimping pliers for crimping terminals • Socket wrench set, 1/4”, 33 pieces • „PUK“ pocket saw, fixed handle • Bench hammer, 300 g • Cable stripping knife, plastic scales • VDE/GS Voltage tester • Combination snips, 190 mm • Cable cutter, max. 16.9 Ø
Art. no. 220179
empty 220068
kg 8,180
32-pieces
PU 1
Tool case „Inspektor“
222
kg Ø TL Ø
CW L W D
PU 1
Contents: • 2C telephone pliers, straight, 200 mm • 2C combination pliers, 180 mm • 2C heavy duty side cutters, 180 mm • 2C wire stripping pliers, 160 mm • 2C electrician‘s screwdrivers 2.5 x 75, 3 x 100, 5.5 x 125, 6.5 x 150 mm • 2C cross slotted screwdrivers, PH, size 1 and 2 • Cable knife, 1-pieces • Wire stripper, hooked blade, 8 - 28 mm Ø • PUK pocket saw, fixed handle • Paint scraper, 40 mm • Electricians’ chisel, 10 x 250 mm • Voltage tester, 220 - 250 volt • Engineers’ hammer, 300 g • Measuring stick, 2 m
kg 8,980
25-pieces
Weight in kg Cross-section mm Total length Cross-section mm
kg 8,500
23-pieces
Hard-top case, for apprentices, black, 2 tool kits, one with document pocket, cover-plate with pocket compartments and clip-compartment, 18 tools. Case 22 00 38 (460 x 160 x 310 mm).
Contents: • 2C combination pliers, 180 mm • 2C heavy duty side cutters, 180 mm • 2C telephone pliers, 200 mm • 2C telephone pliers, bent 200 mm • 2C water pump pliers, 240 mm • 2C wire stripping pliers, 160 mm • 2C electrician‘s screwdrivers 75, 125, 150 mm • 2C engineers’ screwdrivers 100, 150 mm • 2C cross slotted screwdrivers PH, size 1 + 2 • 2C piercing awl • Wire stripper, hooked blade, 8 - 28 mm Ø • Voltage tester, 150 - 250 V • Adjustable wrench, 210 mm • Paint scraper, 50 mm • Electricians’ Chisel, 10 x 250 mm • Engineers’ hammer, 300 g • Cable knife, 1 blade • Universal scissors, 190 mm • PUK pocket saw, fixed handle • Measuring stick, 2 m • Alu level 400 mm
empty 220068
empty 220068
Tool case “2 component”
rigid case, black, with high-grade fittings, Master’s case with 25 tools. Case 22 00 68.
Art. no. 220176
Art. no. 220192
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
PU 1
Art. no. 220170
Contents Blade length Diameter in mm² Strength
empty 220038
c-hole Mat. TMA WS
kg 7
18-pieces
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1
Hard-top tool cases Tool case „Merkur Plus“
Tool case „Compact“
rigid case, black, Master’s case with 25 tools. Case 22 00 34.
Hard-top case, black, 2 tool kits (one with document pocket), bottom half of case equipped with variable partitions, case 22 00 38.
Contents: • 2C electrician‘s screwdrivers 75, 125, 150 mm • 2C engineers’ screwdrivers 100, 150 mm • 2C cross slotted screwdrivers, PH, size 1 and 2 • Universal scissor, 190 mm • Cable knife, 1-piece • Wire stripper, hooked blade, 8 - 28 mm Ø • 2C combination pliers, 180 mm • 2C heavy duty side cutters, 180 mm • 2C telephone pliers, 200 mm • 2C telephone pliers, bent, 200 mm • 2C water pump pliers, 240 mm • 2C wire stripping pliers, 160 mm • PUK pocket saw, fixed handle • Electricians’ chisel 10 x 250 mm • Measuring stick, 2 m • Alu level, 400 mm • 2C piercing awl • Voltage tester 150 - 250 V • Adjustable wrench, 210 mm • Engineers’ hammer, 300 g • Paint scraper, 50 mm
Contents: • 2C electrician‘s screwdrivers, 2,5 x 75, 4 x 100, 4 x 125, 5 x 150 mm • 2C cross slotted screwdrivers, PH, size 1 and 2 • Electronic screwdriver set, 7-pieces • 2C combination pliers, 180 mm • 2C side cutters, 160 mm • 2C telephone pliers, 200 mm • Wire stripper, hooked blade, 8 - 28 mm Ø • Cable stripping knive, 4 - 16 mm Ø • Automatic wire stripper, 0,2 - 6 mm² • Cable cutter with a snap • 2K Soft-Grip scissor, 140 mm • PUK pocket saw, fixed handle • HAUPA „Bit box“, 17-pieces • SDS-plus set, 5-pieces • Spirit level, 400 mm • Measuring tape, 3 m • Voltage tester „Basic“
Art. no. 220229
Art. no. 220035
empty 220034
25-pieces
kg 9,980
PU 1
inside: 1 separation for documents, 2 plate for tools, 1 cover-plate with pocket compartments and clip-compartment. Case 22 00 38. Contents: • 2C electrician’s screwdrivers, 75, 100, 125, 150 mm • 2C engineers’ screwdriver, 100 mm • 2C cross slotted screwdrivers, PZ, size 1 and 2 • Wire stripper, hooked blade, 8 - 28 mm Ø • Control cabinet key • Jointing chisel, 26 x 250 mm • Electrician‘s chisel, 10 x 250 mm • Cable stripping knife, plastic shank • Universal saw, heavy 150 mm • 2C combination pliers, 180 mm • 2C heavy duty side cutters, 180 mm • 2C telephone pliers, 200 mm • 2C wire stripping pliers, 160 mm • Cabinet level, 250 mm • Bench hammer, 300 g • Voltage tester “Basic” • VDE/GS voltage tester
empty 220038
21-pieces
kg 7,460
47-pieces
kg 7,180
PU 1
The ideal tool assortment rigid case, black, with high-grade fittings, with 32 tools. Case 22 00 68. Contents: • 2C combination pliers, 180 mm • 2C telephone pliers, 200 mm • 2C side cutters, 160 mm • 2C telephone pliers, 200 mm • 2C water pump pliers, 240 mm • ESD electronic side cutters, 115 mm • ESD electronic needle nose pliers, 130 mm • 2C electrician screwdrivers 75, 75, 125, 150 mm • 2C engineers’ screwdrivers 100, 150 mm • 2C cross slotted screwdrivers PH, size 1 + 2 • Electronic screwdriver set, 7-pieces • Solder for electronic work, Sn 60%, 1.5 mm, 100 g • Claw retriever with fixed shaft, size 165 • 2C piercing awl, square • 2C socket wrenches 7, 8, 10 • Checking mirror, 210 mm • Socket wrench set, 1/4”, 33 piece • Contact soldering iron, 30 watt • Cable stripping knife, plastic handle • Bench hammer, 300 g • Universal saw, heavy 150 mm • Cable stripper, 0.5 - 4 mm Ø • Tweezer angled • Combination snips, 190 mm • VDE/GS Voltage tester
Tool case „Panther“
Art. no. 220040
empty 220038
PU 1
Art. no. 220177
empty 220068
32-pieces
kg 10,260
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
223
Standard program
Drilling tools
...convincing solutions
Twist drills Twist drills DIN 338/HSS type N point angle 118°, spiral angle 25 - 35°, Ø-tolerance h 8, of HSS, for drilling of steel, steel-casting alloyed and unalloyed up to approx. 900 N/mm² strength grey- and tempered casting, sinter iron, newsilver, graphit, alu-alloy, bronze and brass
Art. no. 230220 230220/CO 230230 230230/CO 230240 230240/CO 230244 230244/CO 230250 230250/CO
Packaging unit in blister pack: 0,5 - 3,0 mm; 1 SPU = 3 pieces 3,2 - 6,0 mm; 1 SPU = 2 pieces 6,5 - 13,0 mm; 1 SPU = 1 piece
Ø 11
core-hole
SL 87
TL 133
94
142
101
151
12,5
101
151
13
101
151
11,5 12
M14
PU 1 1 1 1 1 1 1 1 1 1
Twist drills DIN 338/HSS type N made from hight power steel, in plastic pocket Art. no. 230010 230020 230020/CO 230030 230030/CO 230032 230032/CO 230040 230040/CO 230050 230050/CO 230060 230060/CO 230064 230064/CO 230066 230066/CO 230070 230070/CO 230080 230080/CO 230084 230084/CO 230090 230090/CO 230100 230100/CO 230110 230110/CO 230120 230120/CO 230130 230130/CO 230136 230136/CO 230140 230140/CO 230160 230160/CO 230170 230170/CO 230180 230180/CO 230190 230190/CO 230200 230200/CO 230204 230204/CO 230210 230210/CO
226
kg Ø TL Ø
Ø 0,5 1
core-hole
SL 6 12
TL 22 34
18
40
20
43
24
49
30
57
3
33
61
3,2
36
65
36
65
3,5
39
70
4
43
75
43
75
47
80
52
86
57
93
57
93
63
101
69
101
7
69
109
8
75
117
75
117
9
81
125
9,5
81
125
10
87
133
87
133
87
133
1,5 1,6
M2
2 2,5
3,3
4,2
M3
M4
M5
4,5 5
M6
5,5 6
M7
6,5 6,8
8,5
10,2
M8
M10
M12
10,5
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Cont. BL mm² St.
Art. no. 230312 230312/R 230312/TIN 230314 230314/R 230314/TIN
Ø 1 - 10 1 - 10 1 - 10 1 - 13 1 - 13 1 - 13
19-pieces 25-pieces
kg 0,312 0,284 0,345 1,270 1,213 1,290
PU 1 1 1 1 1 1
kg 4,550
PU 1
Bulk storage chest for twist drills HSS, DIN 338, 170 pieces, TYP N, short, ground, bright, with split point, TIN coated. Contents: 1.0 - 10.0 mm (upstairs in 0.5 mm steps) up to 8,0 mm 10 pieces/size > 8,5 mm 5 pieces/size
Art. no. 230301/TIN
Contents Blade length Diameter in mm² Strength
170-pieces
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Drills
Drills
Auger bit, type Lewis
Masonry drills DIN 8039 carbide tipped, with straight shank, each piece in plastic pocket
Art. no. 231502 231508 231516 231524 231526 231528 231530 231532 231534 231540 231544 231546
TL 460 235 235 235 460 235 460 235 460 235 235 460
Ø 6 10 14 18 18 20 20 22 22 26 28 28
kg 0,005 0,098 0,005 0,200 0,468 0,005 0,005 0,300 0,642 0,005 0,005 0,005
PU 1 1 1 1 1 1 1 1 1 1 1 1
Drill type machine bits for wood made from carbon steel, concentrically ground, with centre point and front cutter
Art. no. 230616 230618 230620 230622 230626 230628 230630 230634 230636
TL 70 80 90 100 120 130 137 150 170
Ø 3 4 5 6 8 9 10 12 13
kg 0,005 0,008 0,011 0,015 0,031 0,039 0,047 0,075 0,088
PU 1 1 1 1 1 1 1 1 1
kg 0,041 0,041 0,048 0,051 0,047 0,045 0,045
PU 1 1 1 1 1 1 1
Flat bits with flat cutter head, square shank, DIN 6447 A
Art. no. 230732 230734 230736 230738 230740 230742 230746
TL 150 150 150 150 150 150 150
Ø 10 12 14 16 18 20 24
shank 6 6 6 6 6 6 6
Art. no. 230330 230331 230332 230334 230336 230338 230340 230342 230344 230346 230352 230354 230356 230358 230360 230362 230364
TL 70 75 80 85 90 95 100 105 110 120 140 150 160 170 180 190 190
Ø 3 3,5 4 4,5 5 5,5 6 6,5 7 8 10 11 12 13 14 15 16
CL 40 45 45 50 50 55 60 65 65 70 90 95 105 110 115 125 125
kg 0,003 0,056 0,008 0,008 0,011 0,012 0,018 0,018 0,018 0,027 0,035 0,082 0,090 0,100 0,120 0,165 0,092
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
kg 0,130 0,124 0,143 0,316 0,232 0,460 0,608 0,222 0,222 0,330 0,463 0,568 0,715 0,896 1,164
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
kg 0,007 0,011 0,017 0,018 0,020 0,027 0,030 0,035 0,090 0,100
PU 1 1 1 1 1 1 1 1 1 1
Masonry drills DIN 8039 carbide tipped, with straight shank, each piece in plastic pocket
Art. no. 230370 230372 230374 230376 230378 230380 230382 230400 230402 230404 230406 230408 230410 230412 230414
TL 400 400 400 400 400 400 400 600 600 600 600 600 600 600 600
Ø 8 10 12 14 16 18 20 8 10 12 14 16 18 20 22
CL 300 300 300 300 300 300 300 500 500 500 500 500 500 500 500
Masonry drill bit High-Helix Masonry drill bit, sand blasted, countersink construction, professional quality
Casing drill With cylindrical clamping shaft, cutting element made of chrome vanadium steel
Art. no. 231750 231752 231754 231756 231758 231760 231766
TL 400 400 400 400 400 400 400
Ø 6 8 10 12 13 17 22
kg 0,100 0,005 0,160 0,200 0,200 0,005 0,200
PU 1 1 1 1 1 1 1
Art. no. 231700 231702 231704 231706 231708 231710 231712 231714 231716 231718
TL 70 85 95 100 100 120 120 120 150 150
Ø 3 4 5 6 7 8 9 10 11 12
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
227
Drills SDS hammer drill bits
SDS hammer drill bits
Top quality: SDS-Plus fast fitting system: 2 lengthwise slots and 2 round slots at the end of the shank. Universal tool fitting for different types of hammer drills according to the SDS-Plus system
Workshop quality: SDS-Plus fast fitting system: 2 lengthwise slots and 2 round slots at the end of the shank. Universal tool fitting for different types of hammer drills according to the SDS-Plus system
Art. no. 230430 230431 230432 230433 230434 230436 230438 230438/A 230438/B 230440 230442 230442/A 230444 230444/A 230448 230450 230450/A 230451 230453 230454 230456 230457 230458 230459 230460 230460/A 230461 230464 230466 230467 230473 230474 230475 230478/1 230395 230396 230397 230398
Art. no. 230900 230902 230904 230906/1 230908 230910 230912 230914 230916 230918 230920 230922 230924 230926 230928 230930/1 230932 230934 230936 230938 230940 230942 230944 230946 230948 230950 230952 230954/1 230956 230958 230960 230962/1 230964 230966 230968 230970 230972 230974 230976 230978
TL 110 160 110 160 110 160 110 160 160 110 110 160 210 460 160 210 260 460 210 160 260 460 160 600 160 260 460 210 460 600 600 210 460 600 460 600 460 460
Ø 5 5 5,5 5,5 6 6 6,5 7 6,5 7 8 8 8 8 10 10 10 10 12 12 12 12 13 12 14 14 14 16 16 14 16 20 18 10 20 20 22 25
CL 50 100 50 100 50 100 50 100 100 50 50 100 150 400 100 150 150 400 150 100 200 400 85 540 100 200 400 150 400 540 540 150 400 540 400 540 400 400
kg 0,037 0,042 0,037 0,045 0,039 0,045 0,038 0,050 0,047 0,041 0,046 0,056 0,064 0,150 0,065 0,087 0,118 0,192 0,107 0,097 0,159 0,263 0,111 0,286 0,087 0,171 0,257 0,197 0,418 0,339 0,561 0,246 0,475 0,270 0,585 0,737 0,669 0,998
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
SDS-Nut-hammer drill sets Contents: 5, 6, 8 x 110 / 6, 8, 10, 12 x 160
TL 110 160 110 160 110 160 110 160 110 160 110 160 210 160 210 260 450 600 260 160 210 310 460 600 160 160 260 460 600 160 210 460 600 200 460 210 310 460 460 460
Ø 5 5 5,5 5,5 6 6 6,5 6,5 7 7 8 8 8 10 10 10 10 10 11 12 12 12 12 12 13 14 14 14 14 15 16 16 16 18 18 20 20 20 22 25
CL 50 100 50 100 50 100 50 100 50 100 50 100 150 100 150 150 400 540 210 100 150 260 400 540 100 100 210 400 540 100 150 400 540 140 400 150 250 400 400 400
kg 0,036 0,042 0,036 0,043 0,040 0,045 0,041 0,045 0,040 0,045 0,045 0,055 0,067 0,068 0,095 0,107 0,155 0,365 0,070 0,077 0,106 0,120 0,250 0,315 0,085 0,200 0,250 0,300 0,365 0,120 0,195 0,346 0,418 0,180 0,395 0,221 0,383 0,503 0,583 0,753
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
5-pieces
kg 0,261
PU 1
SDS-hammer drill sets Contents: 5, 6 x 110, 6, 8, 10 x 160
Art. no. 230979
HSS taps ”Direct cutter” Art. no. 230479
kg 0,679
7-pieces
PU 1
with intermittent teeth, dimensions to DIN 371, or ISO metric thread to DIN 13
Art. no. 230982 230984 230986 230988
228
kg Ø TL Ø
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
shank 4,5 6 6 6
c-hole Mat. TMA WS
thread 4 5 6 8
Core hole Material Tested/Measured area Wrench size
kg 0,008 0,014 0,017 0,012
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1 1 1 1
Threading bits, taps Screw extractor set
Ratchet wrenches for right-hand and left-hand action
Art. no. 230682 230683
size 1-5/M3-18 1-6/M3-24
kg 0,111 0,231
PU 1 1 Art. no. 231070 231072 231074 231076
Hand taps DIN 352, type N/HSS set of 3, for ISO metric thread to DIN, 1, 2, 3-cutter, made of HSS, for passthrough threading, for good chipping steel up to approx. 900 N/mm²
shank 2,4 - 5,5 4,5 - 7 2,4 - 5,5 4,5 - 7
thread M3 - 9 M9 - 12 M3 - 9 M5 - 12
kg 0,174 0,271 0,291 0,420
PU 1 1 1 1
kg 0,696
PU 1
HSS taps set with taps to DIN 352, in metal box, Contents: M3, M 4, M 5, M 6, M 8, M 10, M 12
Art. no. 230800 230802 230804 230806 230808 230810 230812 230814 230816 230818 230820 230822 230824 230826 230828 230830 230832 230834 230836 230838 230840 230842 230844 230846 230848 230850 230852 230854 230856 230858 230860 230862 230864 230866 230868 230870
Ø 1 1,4 1,6 1,8 2 2,2 2,5 3 3,5 4 4,5 5 6 7 8 9 10 11 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52 56 60
shank 2,5 2,5 2,5 2,5 2,8 2,8 2,8 3,5 4 4,5 5,5 6 6 6 6 7 7 8 9 11 12 14 16 18 18 20 22 25 28 32 32 36 36 40 45 45
thread 1 1,4 1,6 1,8 2 2,2 2,5 3 3,5 4 4,5 5 6 7 8 9 10 11 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52 56 60
kg 0,010 0,010 0,002 0,002 0,002 0,002 0,002 0,003 0,004 0,004 0,005 0,034 0,035 0,039 0,046 0,065 0,071 0,025 0,115 0,052 0,062 0,102 0,125 0,182 0,205 0,260 0,395 0,480 0,645 0,820 0,930 1,140 1,370 1,650 2,800 2,900
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Art. no. 231080
Content M 3,4,5,6,8,10,12
23-pieces
Combi, threading bit set, made of HSSG SGE-Bit (DBGM) for drilling, threading and countersinking, for stand drilling machines and hand drills, suitable for steel and NE metal up to 1 xd (M 6 = 6 mm thickness of material), up to 600 N/mm² tensile strength, rpm according to the cutting speeds of the tride, in metal box
Art. no. 231082
Content M 3,4,5,6,8,10
7-pieces
kg 0,188
PU 1
kg 0,050 0,099 0,097 0,285 0,700 1,270 1,630 4,520
PU 1 1 1 1 1 1 1 1
Adjustable tap wrenches DIN 1814 for taps
Art. no. 231050 231052 231054 231056 231058 231060 231062 231064
thread M1 - 8 M1 - 10 M1 - 12 M4 - 12 M5 - 21 M9 - 27 M12 - 33 M19 - 38
tap wrench 0 1 1,5 2 3 4 5 6
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
229
Threading bits, taps
Cone drills
HSS Tap set
Cone drills/Aerial drills/HSS
Contents: hand tap (DIN 352) M 3, 4, 5, 6, 8, 10, 12 Dies (DIN 223) M 3, 4, 5, 6, 8, 10, 12, Dies stock 20 x 5/20 x 7/25 x 9/30 x 11/ 38 x 14 mm tape holder size 1 + 2, in metal box
for edgefree drilling of thin material
Art. no. 231280
kg 3,700
23-pieces
PU 1
HSS Tap set Contents: Hand tap (DIN 352) M 5, 6, 8, 10, 12, 14, 16, 18, 20 Dies (DIN 223) M 5, 6, 8, 10, 12, 14, 16, 18, 20 Dies holder 20 x 7/25 x 9/30 x 11/38 x 14/ 45 x 18 mm Tap holder size 1 + 3, in metal box
Art. no. 231282
Art. no. 231300 231301 231330 231302 231304 231305 231306 231307
shank 6 8 8 10 12 10 12 13
min./Ø 3 6 6 16 26 6 36 46
max./Ø 14 20 22,5 30 40 30 50 60
kg 0,027 0,055 0,085 0,139 0,265 0,166 0,350 0,551
PU 1 1 1 1 1 1 1 1
kg 0,510
PU 1
Set of cone drills/HSS 4 pieces, in metal box.
kg 8,200
25-pieces
PU 1
Art. no. 231312
Ø 3-30
4-pieces
Combination step drills/HSS for metric PG rough thread-through-hole and core-hole-drillings, 6 drilling diameters for core-hole with 5 mm step for sheet metal up to max. 6 mm. Through-hole: 8,5 – 12,5 – 16,5 – 20,5 – 25,5 – 32,5 – 40,5 mm core-hole: 10,5 (M12) – 14,5 (M16) – 18,5 (M20) – 23,5 (M25) – 30,5 (M32) – 38,5 (M40)
Art. no. 231319
min./Ø 8,5
max./Ø 40,5
kg 0,269
PU 1
Rotary guide value for step drills/cone drills Material
Materialstärke Material gauge Kühlung Lubricant Vc = m / min ø mm 4,0 - 12,0 4,0 - 20,0 12,0 - 20,0 4,0 - 24,0 6,0 - 30,0 20,0 - 30,0 6,0 - 36,0 30,0 - 40,0 40,0 - 50,0 50,0 - 60,0
230
kg Ø TL Ø
unleg. Baustahl < 700 N/mm2 Mild steel < 700 N/mm2 6,0 mm Bohrpaste Drilling paste 25 U/min r.p.m 1900 - 600 1900 - 400 600 - 400 1900 - 300 1300 - 250 400 - 250 1300 - 220 250 - 200 200 - 160 160 - 130
unleg. Baustahl leg. Stahl Gußeisen > 700 N/mm2 < 1000 N/mm2 < 250 N/mm2 Mild steel Alloy steel Cast iron > 700 N/mm2 < 1000 N/mm2 < 250 N/mm2 6,0 mm Bohrpaste Drilling paste 20 - 25 U/min r.p.m 1700 - 580 1700 - 350 600 - 350 1700 - 280 1200 - 230 350 - 230 1200 - 200 230 - 180 180 - 140 140 - 110
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
6,0 mm Bohrpaste Drilling paste 20 U/min r.p.m 1550 - 520 1550 - 300 520 - 300 1550 - 250 1000 - 200 300 - 200 1000 - 170 200 - 150 150 - 125 125 - 100
6,0 mm Luft Air 15 U/min r.p.m 1190 - 400 1190 - 240 400 - 240 1190 - 200 780 - 150 230 - 150 780 - 130 150 - 120 120 - 90 90 - 80 Cutting width Length in mm Width in mm Depth in mm
GußeisenMaterialEdelstahl CuZn Leg. spröde > 250 N/mm2 rostfrei CuZn alloy Cast iron Stainless brittle > 250 N/mm2 steel Materialstärke gauge 6,0 mm 6,0 mmMaterial3,0 mm Luft Luft Bohrpaste Bohrpaste Air Lubricant Drilling paste Air 10 m / min 5 60 U/min U/min U/min ø mm r.p.m r.p.m r.p.m 800 - 250 4,0 400 - 130 4700 - 1550 - 12,0 800 - 160 4,0 400 - 80 - 20,0 4700 - 950 250 - 160 12,0 130 - 80 - 20,0 1550 - 950 800 - 130 4,0 400 - 24,0- 65 4700 - 790 530 - 100 6,0 250 - 50 - 30,0 3150 - 630 160 - 100 20,0 -80 - 50 30,0 950 - 630 530 - 90 6,0 250 - 45 - 36,0 3150 - 530 100 - 80 30,0 -50 - 40 40,0 630 - 470 80 - 65 30,0 -40 - 30 40,0 470 - 380 65 - 50 30,0 -30 - 25 40,0 380 - 310 Cont. BL mm² St.
Contents Blade length Diameter in mm² Strength
CuZn Leg. zäh CuZn alloy tough
AL Leg. < 11% Si Alloy steel < 11% Si
Thermoplaste Thermo plastic
Duroplaste Duro plastic
6,0 mm Luft Air 35 U/min r.p.m 2750 - 920 2750 - 550 920 - 550 2750 - 460 1850 - 370 550 - 370 1850 - 300 370 - 280 280 - 220 220 - 185
6,0 mm Bohrpaste Drilling paste 30 U/min r.p.m 2350 - 790 2350 - 470 790 - 470 2350 - 400 1590 - 310 470 - 310 1590 - 260 310 - 240 240 - 190 190 - 150
6,0 mm H2O H2O 20 U/min r.p.m 1550 - 520 1550 - 300 520 - 300 1550 - 250 1000 - 200 300 - 200 1000 - 170 200 - 150 150 - 125 125 - 100
6,0 mm Luft Air 15 U/min r.p.m 1190 - 400 1190 - 240 400 - 240 1190 - 200 780 - 150 230 - 150 780 - 130 150 - 120 120 - 90 90 - 80
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Holz Wood
25,0 mm Luft Air > 40 U/min r.p.m 3000 - 1000 3000 - 650 1000 - 650 3000 - 550 2100 - 420 650 - 420 2100 - 350 420 - 310 310 - 250 250 - 210
Saw blade length Drive Colour Packing unit/piece
Step drills Step drills /HSS
Step drills /HSS
Special type for electric assembly, for sheet metal up to max. 4 mm gauge, for metric thread through-hole drilling, 8,5 – 12,5 – 16,5 – 20,5 – 25,5 – 32,5 – 40,5 mm
for amoured conduit core removing hole sizes up to 6 mm thickness
Art. no. 231323
min./Ø 7
max./Ø 21
kg 0,150
PU 1
Step drills /HSS Art. no. 231324
min./Ø 8,5
max./Ø 40,5
kg 0,199
PU 1
for mechanical engineering and tinsmith working, with 2 cutters, metric
Step drills /HSS thickness up to max. 6 mm, for metric core-hole-drilling, 8,5 - 10,5 - 14,5 - 18,5 - 23,5 - 30,5 mm
Art. no. 231326
min./Ø 8,5
max./Ø 30,5
Art. no. 231336 231338 231340 231342 231350 231352 231354 kg 0,208
PU 1
Step drills /HSS
min./Ø 7 7
max./Ø 29 21
kg 0,237 0,151
min./Ø 4 12 20 30 4 4 6
max./Ø 12 20 30 40 12 20 30
kg 0,027 0,079 0,203 0,371 0,027 0,059 0,162
PU 1 1 1 1 1 1 1
kg 0,597
PU 1
kg 0,047
PU 1
Step drills assortiment/HSS 4 pieces, for mechanical engineering and tinsmith working, with 2 cutters. Contents: Ø 4 - 12 mm, Ø 12 - 20 mm, Ø 20 - 30 mm, paste
special type for electric assembly, for sheet steel up to 4 mm thickness, for amoured conduit thread sizes
Art. no. 231320 231322
shank 6 9 12 12 6 8 10
PU 1 1
Art. no. 231327
Ø 4-30
4-pieces
Drilling paste high quality drilling paste, in practical container, 17 g
Art. no. 231334
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
231
Screw punches, hollow core cutters, threading dies Spare screws
Nipple threading dies
Spare screws for screw punches
with guide, replaceable dies and taps
Art. no. 180530 180532 180534
size 10 x 1,0 12 x 1,5 16 x 1,5
kg 0,048 0,070 0,139
PU 1 1 1
Art. no. 140190 140192
thread M 10 M 13
kg 0,100 0,130
PU 1 1
kg 0,210
PU 1
kg 1,000 1,350 3,500 2,850
PU 1 1 1 1
thread M16 M20 M25 M32 M 40 M 50 M 63
kg 0,175 0,138 0,145 0,477 0,130 0,980 0,791
PU 1 1 1 1 1 1 1
thread 16 20 25 32 40 50 63
kg 0,037 0,040 0,035 0,030 0,060 0,070 0,134
PU 1 1 1 1 1 1 1
Screw punches matching for cable connection acc. the new Euro-Norm EN 50262, with 3 cutting edges for iron sheet up to 2 mm, steel sheet up to 1,5 mm, stainless- steel sheet up to 1,5 mm thickness
Nipple threading dies with guide, replaceable dies and tap
Art. no. 140210 Art. no. 180513 180515 180517 180519 180521 180523 180525 180500 180502 180504 180506 180508 180510 180512 180514 180516 180518 180520
metric metric metric metric metric metric metric PG PG PG PG PG PG PG PG PG PG PG
ISO 16 ISO 20 ISO 25 ISO 32 ISO 40 ISO 50 ISO 63 PG9 PG11 PG13,5 PG16 PG21 PG29 30,5 PG36 PG42 PG48 1 1/8“
screws 180530 180530 180530 180530 180532 180534 180534 180530 180530 180530 180530 180530 180532 180534 180534 180534 180534 180530
kg 0,101 0,115 0,154 0,320 0,950 0,636 0,974 0,097 0,106 0,115 0,100 0,176 0,400 0,202 0,590 1,250 0,319 0,250
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
thread M 10, M 13
Complete stocks, metric thread
Art. no. 140214 140216 140220 140218
thread M 16, M 20, M 25 M 20, M 25 M 50, M 63 M 32, M 40
Dies, metric thread
Taps for armoured steel conduits, metric thread
Art. no. 140236 140238 140240 140242 140244 140246 140248
thread 16 20 25 32 40 50 63
kg 0,040 0,060 0,206 0,359 0,648 0,230 1,688
PU 1 1 1 1 1 1 1
Art. no. 140222 140224 140226 140228 140230 140232 140234
Guides, metric
Adjustable tap wrenches short pattern
Art. no. 140180 140182
232
kg Ø TL Ø
thread M 7-25 M 32-63
Weight in kg Cross-section mm Total length Cross-section mm
tap wrench 21 48
CW L W D
kg 0,850 1,900
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
PU 1 1
Art. no. 140250 140252 140254 140256 140258 140260 140262
Contents Blade length Diameter in mm² Strength
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Diamond hollow core cutters Diamond hollow core cutters
Shank for hollow core cutters, SDS-Plus
Carrier turned from solid material, suitable for soft materials and brickwork, concrete and artificial stone, takes M 16, without receiving shaft and centre drill, laser-welded, use only without impact
SDS-Plus-shank, M 16, conic
Art. no. 230681/K
TL 100
shank SDS-plus
kg 0,150
PU 1
Hollow core cutters for tungsten carbide tipped, with centre bit and 100 mm hexagon shank, SW 12 Art. no. 230676 230677
Ø 68 82
kg 0,453 0,590
PU 1 1
Diamond hollow core cutters shank M 16, with tapered cylindrical drill bit, hexagon fitting, laser-welded, use only without impact
Art. no. 230661 230665 230667 230675
Ø 68 82 68 82
shank hexagon hexagon SDS-plus SDS-plus
kg 0,832 1,158 0,827 1,079
PU 1 1 1 1
Centre bits with tungsten carbide tipped cutting edge for tungsten carbide tipped hollow core cutters, cylindrical Art. no. 230676/K 230677/K
Ø 68 82
shank SDS-plus SDS-plus
kg 0,672 0,764
PU 1 1
Diamond hollow core cutter special Diamond drill bit for socket outlets with laser wielded segments, suitable for soft materials and brickwork, concrete and artificial stone, optimal rotating speed 800 - 1.000 U/min, maximum rotating speed 1.600 – 1.800 U/min, use only without impact
Art. no. 230680
TL 120
Ø 68 82
shank SDS-plus SDS-plus
kg 0,450 0,787
PU 1 1
kg 0,038
PU 1
kg 0,139
PU 1
kg 0,121
PU 1
Shank for hollow core cutters, SW 12 hexagon shank, SW 12, for centre bits, cylindrical cutter
Art. no. 230678 Art. no. 230885/K 230886/K
Ø 9
shank hexagon
Shank for hollow core cutters SDS-Plus-shank, M 16, connection thread, cylindrical cutter
Drill for Diamond hollow core cutters tapered shank Art. no. 230681 Art. no. 230679
TL 120
Ø 9
kg 0,044
TL 100
shank SDS-plus
PU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
233
Cutting discs
Hollow saws
Diamond cutting blades
Hard metal hole saw
laser-welded, high diamond concentration, long life, for the professional works – Industrial quality –
Art. no. 230689 230691 230720 230721 230704 230705 230706 230711
Ø 115 125 135 140 150 180 230 300
(FUBAG) (FLEX)
kg 0,100 0,149 0,193 0,219 0,245 0,317 0,700 1,256
PU 1 1 1 1 1 1 1 1
kg 0,132 0,169 0,339 0,681
PU 1 1 1 1
Diamond cutting blades sintered – Profi Quality –
Art. no. 230701 230702 230708 230709
Ø 115 125 180 230
Art. no. 231942 231944 231946 231948 231950 231952 231954 231956 231958 231960 231962 231964 231966 231968 231970 231972 231973 231974 231976 231978 231980 231982
Ø/Inch 3/4 7/8 1 1 1/6 1 3/16 1 1/4 1 3/8 1 9/16 1 3/4 2 2 1/8 2 3/8 2 1/2 2 9/16 2 11/16 2 3/4 2 7/8 3 3 1/8 3 1/4 4 4 1/2
Ø 19 22 25 27 30 32 35 40 44 51 54 60 64 65 68 70 73 76 79 83 102 114
kg 0,047 0,062 0,077 0,092 0,115 0,122 0,133 0,123 0,144 0,179 0,198 0,206 0,267 0,279 0,275 0,316 0,296 0,298 0,379 0,428 0,591 0,773
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
kg 0,036 0,036 0,046 0,071 0,075 0,079 0,085 0,092 0,086 0,105 0,133 0,145 0,168 0,192 0,198 0,214 0,223 0,236 0,253 0,275 0,304 0,429 0,549
PU 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
HSS-Bi-metal hole saw set cogging
Diamond cutting blades, FL tiles – Profi Quality –, continuous rim. universal application, granite, tiles, ceramics, stone- and marble-flatters
Art. no. 230714
Ø 115
kg 0,121
PU 1
kg 0,120 0,134 0,706
PU 1 1 1
Diamond cutting blades, TBM Turbo – Profi quality –
Art. no. 230722 230723 230725
234
kg Ø TL Ø
Ø 115 125 230
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
Art. no. 231803 231900 231902 231904 231906 231908 231910 231912 231914 231916 231918 231920 231922 231924 231926 231928 231930 231931 231932 231934 231936 231938 231940
Contents Blade length Diameter in mm² Strength
Ø/Inch 9/16 3/4 7/8 1 1 1/6 1 3/16 1 1/4 1 3/8 1 9/16 1 3/4 2 2 1/8 2 3/8 2 1/2 2 9/16 2 11/16 2 3/4 2 7/8 3 3 1/8 3 1/4 4 4 1/2
c-hole Mat. TMA WS
Ø 14 19 22 25 27 30 32 35 40 44 51 54 60 64 65 68 70 73 76 79 83 102 114
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Adapter for hollow saws
Measuring tools
Adapter quick lock
Folding rules
hexagon shank
with spring joint, mm-graduations on both sides
Art. no. 231998 231999
size 14-30 32-152
kg 0,067 0,107
PU 1 1
Certre drills for 231998 / 231999
Art. no. 240002 240005
TL 2 2
type wood fibre glass
width 16 16
kg 0,022 0,138
PU 1 10
Measuring tapes with spring steel tapes, case: plastic, with automatic return motion and locking key, tape with stove-enamel finished
Art. no. 232007
TL 120
type universal
Ø 9
shank hexagon
kg 0,020
PU 1
Carbide tipped hollow saw with border senk D 68 Ø 68 mm, total length 175 mm, multi purpose hole saw for turning operation suitable for plastic, tiles up to hardness 6 and plaster material, set consisting of hole saw D 68, shank SW 11, carbide-tipped centre drill bit, with border senk D 68
Art. no. 240011 240012
TL 3 5
width 13 16
kg 0,104 0,179
PU 1 1
Measuring tapes in metal case, with woven rayon tape, strengthened against streching by 8 bronze wires woven into tape, scale graduations both sides: metres and centimetres Art. no. 230699
Ø 68
shank hexagon
kg 0,659
PU 1
Art. no. 240018 240020 240022 240024
TL 20 25 30 50
width 16 16 16 16
kg 0,432 0,544 0,586 0,857
PU 1 1 1 1
Aluminium spirit levels bubble level made of acrylic glass, accuraty of measurement: 0,043° = 0,75 mm/m
Art. no. 240041 240042 240044 240046 240048
TL 300 400 600 800 1000
kg 0,168 0,198 0,282 0,406 0,534
PU 1 1 1 1 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
235
Measuring tools Electrician‘s safety levels
Engineers’ squares
nonconducting plastic material, with 2 tubes horizontal and vertical
manufactured from steel, bright
Art. no. 240057 240058
TL 400 600
kg 0,188 0,274
PU 1 1
Cabinet levels
Art. no. 240132 240134 240136 240138
TL 150x100 200x130 250x160 300x180
Torped type, nonconducting plastic material, with 3 tubes horizontal, vertical and 45°
Engineers’ squares
width 20 20 25 25
kg 0,181 0,237 0,378 0,445
PU 1 1 1 1
width 20 20 25 25 30
kg 0,170 0,340 0,511 0,440 0,783
PU 1 1 1 1 1
manufactured from steel, bright
Art. no. 240059
TL 200
kg 0,078
PU 1
Torped-level
Art. no. 240152 240154 240156 240158 240160
with 3 tubes horizontal, vertical and 45°
Art. no. 240060
TL 225
kg 0,067
PU 1
TL 150x100 200x130 250x160 300x180 400x230
Steel point scribers knurled handle, replaceable screw-out hardened points, handle with one straight and one bent point (90°)
Precision pocket vernier calipers „Stainless“ manufactured from stainless steel, completely hardened, with measuring nibs, depth gauge and thread tables, in plastic wallet, 1/20“ or 1/128 mm, size 140 mm Art. no. 240234
Art. no. 240071
kg 0,157
TL 250
kg 0,046
PU 1
Precision pocket vernier calipers „digital“ manufactured from stainless steel, completely hardened, with measuring nibs, depth gauge and thread tables, in plastic box with sight window, 1/20“ or 1/128 mm, size 140 mm
Art. no. 240073
236
kg Ø TL Ø
kg 0,150
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
PU 1
Contents Blade length Diameter in mm² Strength
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
PU 1
Standard program
Screws Screws assortments
...convincing solutions
Wood screws Universal countersunk screw
Chipboard screw countersunk „TwinSpeed“
Chipboard screw, galvanised, counter-sunk head, Pozidriv
Chipboard screw, galvanised, counter-sunk head, Tx, double helix thread, considerably shortened screw-in times when compared to traditional screws thanks to the double start thread. Uses: Wood, plywood, plasterboard, rawlplugs
Art. no. 790005 790006 790008 790015 790016 790017 790018 790079 790027 790029 790030 790031 790040 790041 790043 790051 790053 790054 790055 790056 790063 790064 790065
TL 15 25 40 20 25 30 35 40 30 40 45 50 35 40 50 30 40 50 60 80 50 60 80
Ø 3,0 3,0 3,0 3,5 3,5 3,5 3,5 3,5 4,0 4,0 4,0 4,0 4,5 4,5 4,5 5,0 5,0 5,0 5,0 5,0 6,0 6,0 6,0
PU 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 50 50
Drive PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 3 PZ 3 PZ 3
PrU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
kg 0,002 0,002 0,002 0,001 0,001 0,002 0,002 0,002 0,002 0,002 0,003 0,003 0,003 0,003 0,004 0,003 0,004 0,005 0,005 0,007 0,007 0,008 0,011
Universal pan head screw Chipboard screw, galvanised, pan head, Pozidriv cross-head
Art. no. 790091 790093 790100 790101 790102 790103 790104 790111 790112 790113 790118 790120 790121
TL 30 40 30 35 40 45 50 40 45 50 30 40 50
Ø 3,5 3,5 4,0 4,0 4,0 4,0 4,0 4,5 4,5 4,5 5,0 5,0 5,0
Drive PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2
PU 200 200 200 200 200 200 200 200 200 200 200 200 200
PrU 100 100 100 100 100 100 100 100 100 100 100 100 100
kg 0,002 0,002 0,002 0,002 0,003 0,003 0,003 0,004 0,004 0,004 0,004 0,005 0,005
Hexagonal wood screws, hot zinc dipped in accordance with DIN 571, hot zinc dipped, general requirements according to DIN 267 Part 1
Art. no. 790212/V 790223/V 790224/V 790235/V
TL 80 60 80 60
Ø 6,0 8,0 8,0 10,0
Drive Hexagon Hexagon Hexagon Hexagon
WS 10 13 13 17
PU 25 25 25 10
PrU 100 100 100 100
kg 0,015 0,021 0,027 0,036
Dry wall screws
238
kg Ø TL Ø
TL 32 41
Ø 3,0 3,0 3,0 3,0 4,0 4,0 4,0 4,0 4,5 4,5 4,5 5,0 5,0 5,0 5,0 6,0 6,0
PU 200 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50
Drive Tx 10 Tx 10 Tx 10 Tx 10 Tx 15 Tx 15 Tx 15 Tx 15 Tx 20 Tx 20 Tx 20 Tx 25 Tx 25 Tx 25 Tx 25 Tx 30 Tx 30
PrU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
kg 0,002 0,002 0,002 0,002 0,002 0,002 0,003 0,003 0,003 0,003 0,004 0,003 0,004 0,005 0,005 0,008 0,011
Chipboard screw pan head „TwinSpeed“ Chipboard screw, galvanised, pan head, Tx, double helix thread, considerably shortened screw-in times when compared to traditional screws thanks to the double start thread. Uses: Wood, plywood, plasterboard, rawlplugs Art. no. 793099 793100 793101 793102 793103 793104 793111 793112 793113 793118 793120 793121 793125
TL 20 32 35 38 45 50 38 45 50 32 38 50 60
Ø 4,0 4,0 4,0 4,0 4,0 4,0 4,5 4,5 4,5 5,0 5,0 5,0 6,0
PU 100 100 100 100 100 100 100 100 100 100 100 100 50
Drive Tx 15 Tx 15 Tx 15 Tx 15 Tx 15 Tx 15 Tx 20 Tx 20 Tx 20 Tx 25 Tx 25 Tx 25 Tx 30
PrU 100 100 100 100 100 100 100 100 100 100 100 100 100
kg 0,002 0,002 0,002 0,003 0,003 0,003 0,004 0,004 0,004 0,004 0,005 0,005 0,002
Hexagonal wood screws in accordance with DIN 571, galvanised, general requirements according to DIN 267 Part 1
Art. no. 790210 790211 790212 790222 790223 790224 790225 790235 790236 790237
TL 40 60 80 50 60 80 100 60 80 100
Ø 6,0 6,0 6,0 8,0 8,0 8,0 8,0 10,0 10,0 10,0
Ø 4,2 5,8
SftL 50 80
WS 10 10 10 13 13 13 13 17 17 17
Drive Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon
PU 50 25 25 50 25 25 25 10 10 10
PrU 100 100 100 100 100 100 100 100 100 100
kg 0,008 0,012 0,015 0,018 0,021 0,027 0,033 0,036 0,048 0,055
PU 50 10
PrU 100 100
kg 0,006 0,008
galvanised
Drive Tx 20 Tx 20
Ø 3,9 3,9
Weight in kg Cross-section mm Total length Cross-section mm
TL 16 25 32 38 32 38 45 50 32 38 50 30 38 50 60 60 80
Hooks
galvanised, counter-sunk head, Tx
Art. no. 790920 790922
Art. no. 793005 793006 793007 793008 793027 793029 793030 793031 793040 793041 793043 793051 793053 793054 793055 793064 793065
CW L W D
PU 200 200
Cutting width Length in mm Width in mm Depth in mm
PrU 100 100
kg 0,002 0,002
Cont. BL mm² St.
Art. no. 790900 790902
Contents Blade length Diameter in mm² Strength
c-hole Mat. TMA WS
Core hole Material Tested/Measured area Wrench size
Sbl. Drive Col. PU
Saw blade length Drive Colour Packing unit/piece
Tin screws, assembly screws TwinSpeed self tapping screw
Mounting screws
galvanised, Linsenkopf, Philips cross-head and double helix thread, considerably shortened screw-in times when compared to traditional screws thanks to the double start thread. Uses: Wood, plywood, plasterboard, rawlplugs
self-cutting and self-boring, galvanised with washer, Philips cross-head Art. no. 790470
Art. no. 790303 790311 790325 790326 790327 790329 790332 790333 790334 790335
TL 19 32 13 16 19 25 31 38 45 65
Ø 3,5 3,5 4,2 4,2 4,2 4,2 4,2 4,2 4,2 4,2
Drive PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2
PU 100 100 100 100 100 100 100 100 100 100
PrU 100 100 100 100 100 100 100 100 100 100
kg 0,001 0,002 0,001 0,001 0,001 0,002 0,002 0,003 0,003 0,005
Plate screw DIN 7504 in accordance with DIN 7504M (formerly N), self-tapping, hardened steel, galvanised, pan head with Phillips slot, plate screw thread according to DIN 7970
Art. no. 790411 790413 790416 790417 790419 790422 790423 790424 790426 790428 790432 790433 790434 790436
TL 13 19 13 16 25 13 16 19 25 35 13 16 19 25
Ø 3,5 3,5 3,9 3,9 3,9 4,2 4,2 4,2 4,2 4,2 4,8 4,8 4,8 4,8
Drive PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2 PH 2
PU 200 200 200 200 200 200 200 200 200 200 200 200 200 200
PrU 100 100 100 100 100 100 100 100 100 100 100 100 100 100
kg 0,001 0,001 0,001 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,002 0,003 0,003 0,003
Plate screw DIN 7504, Tx in accordance with DIN 7504M (formerly N), self-tapping, hardened steel, galvanised, Tx, plate screw thread according to DIN 7970
Art. no. 790510 790512 790514 790516
TL 13 16 19 25
Ø 4,2 4,2 4,2 4,2
Drive Tx 20 Tx 20 Tx 20 Tx 20
PU 100 100 100 100
PrU 100 100 100 100
kg 0,002 0,002 0,002 0,002
TL 13
Ø 4,2
Drive PH 2
PU 100
PrU 100
kg 0,001
PrU 100 100 100 100 100 100 100 100 100 100
kg 0,006 0,007 0,008 0,012 0,014 0,016 0,023 0,028 0,040 0,047
Machinery screws, cylinder screws Hexagonal machine screws according to DIN 933, continuous thread, galvanised, 8.8 quality
Art. no. 790540 790542 790544 790562 790564 790566 790588 790592 790616 790618
TL 20 25 30 20 25 30 20 30 30 40
Ø M6 M6 M6 M8 M8 M8 M10 M10 M12 M12
Drive Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon Hexagon
WS 10 10 10 13 13 13 17 17 19 19
PU 100 100 100 100 100 100 100 100 50 50
Socket cup screw DIN 84 Form A in accordance with ISO 1207, EN 21207 or DIN 84, Form A, with slot, made of hardened steel, galvanised, 4.8 quality
Art. no. 790806 790808 790832 790834 790837 790862 790864 790867 790882 790884 790888
TL 16 20 16 20 30 16 20 30 16 20 30
Ø M3 M3 M4 M4 M4 M5 M5 M5 M6 M6 M6
slot slot slot slot slot slot slot slot slot slot slot
Drive 5,5x0,8 5,5x0,8 7,0x1,2 7,0x1,2 7,0x1,2 8,5x1,2 8,5x1,2 8,5x1,2 10,0x1,6 10,0x1,6 10,0x1,6
PU 200 200 200 200 200 200 200 200 200 200 200
PrU 100 100 100 100 100 100 100 100 100 100 100
kg 0,001 0,001 0,002 0,002 0,003 0,003 0,004 0,005 0,005 0,055 0,007
PU 100 100 100 100 100 100 100 100 100 100 100 100
PrU 100 100 100 100 100 100 100 100 100 100 100 100
kg 0,001 0,001 0,002 0,002 0,002 0,003 0,003 0,004 0,004 0,004 0,005 0,007
Machine screw counter sunk continuous thread, zinc-plated, counter-sunk head, Pozidriv
Mounting screws galvanised with washer, Philips cross-head, self-cutting
Art. no. 790450 790452 790454 790456
TL 13 25 31 45
Ø 4,2 4,2 4,2 4,2
Drive PH 2 PH 2 PH 2 PH 2
PU 100 100 100 100
PrU 100 100 100 100
kg 0,001 0,002 0,002 0,003
PU 100 100 100
PrU 100 100 100
kg 0,001 0,002 0,002
Mounting screws self-cutting and self-boring, galvanised with washer, Tx
Art. no. 790500 790502 790504
TL 13 19 25
Ø 4,2 4,2 4,2
Drive Tx 20 Tx 20 Tx 20
Art. no. 790700 790702 790704 790706 790710 790712 790714 790716 790721 790722 790724 790726
TL 20 30 40 50 20 30 40 50 25 30 40 50
Ø M3 M3 M3 M3 M4 M4 M4 M4 M5 M5 M5 M5
Drive PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2 PZ 2
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
239
Hexagonal nuts, washers
Screws assortments
Hexagonal nut DIN 934
“Mix” Screws assortment box
in accordance with ISO 4032, EN 24032 or DIN 934, steel galvanised, 8 quality
Content: 1.425 screws, in plastic bulk storage chest 420 x 350 x 60 mm
Art. no. 792000 792001 792002 792003 792005 792006 792008
Ø M3 M4 M5 M6 M8 M10 M12
WS 5,5 7,0 8,0 10,0 13,0 17,0 19,0
PU 200 200 200 200 200 200 100
PrU 100 100 100 100 100 100 100
kg 0,001 0,001 0,001 0,002 0,005 0,011 0,010
PU 200 200 200 200 200 200
PrU 100 100 100 100 100 100
kg 0,000 0,000 0,001 0,001 0,002 0,003
PU 100 100 100 100 100 100
PrU 100 100 100 100 100 100
kg 0,001 0,001 0,012 0,011 0,010 0,010
Washers DIN 125 in accordance with ISO 7089, EN 27089 or DIN 125, Form A without chamfer, steel galvanised Art. no. 792600 792602 792603 792604 792606 792607
M M3 M4 M5 M6 M8 M10
d1 3,2 4,3 5,3 6,4 8,4 10,5
d4 7,0 9,0 10,0 12,0 16,0 20,0
Qty. 200 200 200 200 100 50 50 200 100 50 50 25
Description universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal pan head srews universal pan head srews universal pan head srews hexagonal wood screws hexagonal wood screws
Size 3,5 x 20 3,5 x 30 3,5 x 40 4,5 x 35 4,5 x 50 5,0 x 80 6,0 x 50 3,5 x 30 4,0 x 40 5,0 x 50 6 x 40 6 x 80
Drive PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ3 PZ2 PZ2 PZ2
Art. no. 790015 790017 790079 790040 790043 790056 790063 790091 790102 790121 790210 790212
Washers in accordance with ISO 7093, DIN 9021N, zinc-plated steel
Art. no. 792650 792651 792652 792654 792656 792658
M M4 M5 M6 M8 M10 M12
d1 4,3 5,3 6,4 8,4 10,5 13,0
d4 12,0 15,0 20,0 25,0 40,0 40,0
Art. no. 792802
Content 1.425-pcs
kg 5,022
PU 1
Content: 1.700 screws, in plastic bulk storage chest 420 x 350 x 60 mm
according to DIN 127, form A, curved, zinc-plate steel
Qty. 200 200 200 200 200 200 200 100 100 100 1
M M6 M8 M10 M12
d1 6,4 8,4 10,5 13,0
d4 11,8 14,8 18,1 21,1
PU 100 100 100 100
PrU 100 100 100 100
kg 0,001 0,002 0,003 0,004
Description universal pan head srews universal pan head srews universal pan head srews universal pan head srews universal pan head srews universal pan head srews universal pan head srews universal pan head srews universal pan head srews universal pan head srews Bit-Box 17-pcs., incl. holder
Art. no. 792804
kg Ø TL Ø
Weight in kg Cross-section mm Total length Cross-section mm
CW L W D
Cutting width Length in mm Width in mm Depth in mm
Cont. BL mm² St.
PrU 1
“Pan head” Screws assortment box
Spring washers
Art. no. 792756 792758 792760 792762
240
empty 220131
Contents Blade length Diameter in mm² Strength
empty 220131
c-hole Mat. TMA WS
Size 3,5 x 30 3,5 x 40 4,0 x 30 4,0 x 40 4,0 x 50 4,5 x 40 4,5 x 50 5,0 x 30 5,0 x 40 5,0 x 50
Drive PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2
Content 1.700-pcs
Core hole Material Tested/Measured area Wrench size
Art. no. 790091 790093 790100 790102 790104 790111 790113 790118 790120 790121 102210
kg 5,000
Sbl. Drive Col. PU
PU 1
PrU 1
Saw blade length Drive Colour Packing unit/piece
Screws assortments “Countersunk” Screws assortment box
“Countersunk” Screws assortment box
Content: 1.800 screws, in plastic bulk storage chest 420 x 350 x 60 mm
Content: 1.800 screws, in plastic bulk storage chest 420 x 350 x 60 mm
Qty. 200 200 200 200 200 200 200 100 100 100 50 50 1
Qty. 200 200 200 200 200 200 200 100 100 100 50 50 1
Description universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws Bit-Box 17-pcs., incl. holder
Art. no. 792806
empty 220131
Size 3,5 x 20 3,5 x 30 3,5 x 40 4,0 x 30 4,0 x 40 4,0 x 50 4,5 x 40 5,0 x 40 5,0 x 50 5,0 x 60 6,0 x 60 6,0 x 80
Drive PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ3 PZ3
Content 1.800-pcs
Art. no. 790015 790017 790079 790027 790029 790031 790041 790053 790054 790055 790064 790065 102210
kg 5,000
PU 1
PrU 1
“Mix Tx” Screws assortment box
Description universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws universal counter-sunk screws Bit-Box 17-pcs., incl. holder
Art. no. 792810
Size 3,0 x 15 3,0 x 25 3,0 x 40 4,0 x 30 4,0 x 40 4,0 x 50 4,5 x 40 5,0 x 40 5,0 x 50 5,0 x 60 6,0 x 60 6,0 x 80
empty 220131
Drive PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ3 PZ3
Content 1.800-pcs
Art. no. 790005 790006 790008 790027 790029 790031 790041 790053 790054 790055 790064 790065 102210
kg 5,000
PU 1
“Mix Tx plus” Screws assortment box
Content: 1.475 screws, in plastic bulk storage chest 420 x 350 x 60 mm
Content: 1.475 screws, in plastic bulk storage chest 420 x 350 x 60 mm
Qty. 200 200 200 200 100 100 50 200 100 50 50 25
Qty. 200 200 200 200 100 100 50 200 100 50 50 25 1
Description TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed pan head srews TwinSpeed pan head srews TwinSpeed pan head srews hexagonal wood screws hexagonal wood screws
Art. no. 792816
empty 220131
Size 2,9 x 15 2,9 x 30 2,9 x 40 4,2 x 35 4,2 x 50 4,8 x 50 6,3 x 80 3,9 x 30 3,9 x 40 4,8 x 50 6 x 40 6 x 80
PrU 1
Drive Tx10 Tx10 Tx10 Tx20 Tx20 Tx25 Tx30 Tx15 Tx15 Tx25
Content 1.475-pcs
Art. no. 793005 793007 793008 793040 793043 793054 793065 793100 793102 793121 790210 790212
kg 5,022
PU 1
PrU 1
Description TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed counter-sunk screws TwinSpeed pan head srews TwinSpeed pan head srews TwinSpeed pan head srews hexagonal wood screws hexagonal wood screws Bit-Box 17-pcs., incl. holder
Art. no. 792818
empty 220131
Size 2,9 x 15 2,9 x 30 2,9 x 40 4,2 x 35 4,2 x 50 4,8 x 50 6,3 x 80 3,9 x 30 3,9 x 40 4,8 x 50 6 x 40 6 x 80
Drive Tx10 Tx10 Tx10 Tx20 Tx20 Tx25 Tx30 Tx15 Tx15 Tx25
Content 1.475-pcs
Art. no. 793005 793007 793008 793040 793043 793054 793065 793100 793102 793121 790210 790212 102210
kg 5,022
PU 1
PrU 1
... convincing solutions
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
241
Index A Accessories for 217050 Adapter Adapter quick lock Adjustable single-head wrench Adjustable single-head wrench with ratch function Adjustable tap wrenches Adjustable tap wrenches DIN 1814 Adjustable wrenches to DIN 3117 A 1000 V Al and Cu cable lugs, longitudinally sealed Al and Cu crimp terminals, longitudinally sealed Al compression cable lugs Al compression cable lugs acc. to DIN 46329, longitudinally sealed AL compression joints, medium voltage 10-30 KV, longitudinally sealed Al crimp terminal Al crimp terminal DIN 46329, longitudinally sealed AL reduction compression joints, medium voltage 10-30 KV, longitudinally sealed AL screw connectors medium voltage 10-30 KV AL screw terminals medium voltage 10-30 KV Al/Cu non-tension compession joints with Cu bolt Al-compession joints, medium voltage 10-30 KV Al-Crimp connector DIN 46267 Part 2 Al-Cu reducing connectors Alignment tool, 3/8“ 1000 V Allen keys DIN 911 Allen keys set Allen keys set Tx Allround soft-grip scissors Alu crimp connectors with Cu pins Aluminium spirit levels Angled cable lugs 90° acc. to DIN 46325 Angled terminals 90° acc. to DIN 46235 Angled tubular cable lugs 90°, standard series Assortment box (Polypropylene) Assortment for Combi-Crimp – DIN Assortment of insulated terminals Assortment of ring terminals, uninsulated Assortment of tubular terminals, light Assortment of tubular terminals, standard Assortments of wire-end sleeves Auger bits, type Lewis Automatic cable stripper Automatic wire stripper Automatic wire stripper 1000 V Automatic wire stripper HAUPA-Special Automatic wire stripper Super Plus
B Backpack Backpack „Basic VDE“ Backpack „Basic“ Backpack „VDE Plus“ Backpack „VDE“ Bag for storing Ball point allen keys Battery Battery powered crimping tool „SC-2“ Battery powered crimping tool „SO-6“ Battery powered cable cutter AS12-52 Battery powered cable cutter AS6-32 Battery powered cable cutter AS6-85 Battery powered cable cutter SAS6-85 Battery powered crimping tool „SL-2“ Battery powered crimping tool „AC25-12“ Battery powered crimping tool „AC42-12“ Battery powered crimping tool „AD300-6“ Battery powered crimping tool „AD400-6“ Battery powered crimping tool „AH-12“ Battery powered crimping tool „AH-6“ Battery powered crimping tool „AO-6“ Battery powered crimping tool „TC25-12“ Battery powered crimping tool „TC42-12“ Battery powered crimping tool „SH-6“ Battery powered wire cutter „AS6S-32“ Battery powered wire cutter „AS6ST-20“ Battery powered wire cutter AS6-40 Battery-hydraulic pump „PA-700“ Battery-powered torch Bi-metal hole saws Bits for PZ slot profile Bolt cutter Border cutter Box for end sleeves Brass pad locks Bulk storage chest for twist drills Butt connectors Butt connectors DIN 46341 part 1, type B Butt connectors, made from pure nickel
242
page 34 42 235 191 191 232 229 151 103 103 101 101 105 101 101 106 107 107 103 105 102 104 157 185 184, 185 185 5 103 235 98 98 90, 91 214 67 78 108, 109 109 108 66, 67 227 21 20 144 20 20
page 216 169 216 169 169 174 184, 185 53 43 46 13 13 13 13 44 48 49 52 52 50 45 46 48 49 45 13 13 13 55 212 234 187 7 16 25 216 226 72, 75, 77 88 100
B
page
Butt connectors, standard series 91 Butt-connector for fine stranded high flexible conductors 94 Butt-connectors, made from pure nickel 100
C
page
Cabinet levels 236 Cable cutter 1000 V 145 Cable cutter with a snap 6 Cable cutter with a snap VDE 144 Cable cutters 6, 7, 8, 9, 144 Cable cutters 1000 V 144, 145 Cable cutters 1000 V with spring joint 144 Cable cutters “Super light” 7 Cable cutters VDE 140 Cable cutters VDE with spring joint 140 Cable cutters with spring joint 6 Cable glands IP 68, metric or PG, assembled with washer and lock nut 120 Cable grips 127 Cable grips for electrical installations 132 Cable grips for subterraneous cable laying 132 Cable knive 1000 V 146 Cable lugs acc. to DIN 46235 95, 97 Cable lugs with 2 oval holes acc. to DIN 46235 98 Cable pulling device FIX 130 Cable pulling device FOX 128 Cable pulling device HAUPA-FIBRE 127 Cable pulling device KING 131 Cable pulling device POWER 131 Cable pulling device SIX 129 Cable pulling device STRONG 131 Cable Sheath Stripper 16 Cable stripper “Kabifix LWL” 17 Cable stripper “Kabifix“ 17 Cable stripper ASI, automatic 21 Cable stripper Outlet 20 21 Cable stripper, automatic 19 Cable stripper, manual 19 Cable stripper, manual optical fibre 19 Cable strippers for short-circuit proof lines 18 Cable strippers for short-circuit proof lines 18 Cable stripping knives 1000 V 146 Cable stripping knives 17, 210 Cable stripping or lead tube knives 210 Cable ties 112, 113 Cable ties “UVplus” 113 Cable ties with fixing eye 114 Cable ties with marking space 114 Cable unwinder 122 Carbide tipped hollow saw with border senk D 68 235 Carpenters‘ pencils 200 Carrying belts 216 Casing drill 227 Catch device made from zinced steel 130, 132 Centre bits with tungsten carbide tipped cutting edge 233 Centre punch to DIN 7250 206 Certre drills for 231998 / 231999 235 Chalk 200 Chalk line roller Fast Squid, 15 m 200 Chalk line roller Squid, 15 m 200 Checking mirrors 184 Chipboard screw countersunk „TwinSpeed“ 238 Chipboard screw pan head „TwinSpeed“ 238 Circuit tester „Control” 149 Claw hammer 206, 207 Claw retrievers 183, 184 Cleaning brushes Safety Line 157 Climping irons 174 Climping irons acc. to DIN 48 345 174 Combi, threading bit set, made of HSSG SGE-Bit (DBGM) 229 Combi-Crimping pliers 26 Combination pliers 2C DIN 5746 194 Combination pliers DIN 5244 VDE 139, 141 Combination pliers DIN ISO 5244 VDE 143 Combination scissors 5 Combination spanners similar to DIN 3113 190 Combination step drills/HSS 230 Combined dowel and contact spanners 157 Complete assembly case 16 Complete stocks, metric thread 232 Compression joints acc. to DIN 46267 Part 1 (for non-tension connections) 96, 99 Compression joints acc. to DIN 48085, Part 1 (for full-tension cable connections) 96 Cone drills/Aerial drills/HSS 230 Connecting rod 42 Connection shackle for probes Ø 6 mm 129 Connection sleeve for probes Ø 11 mm 130, 132 Connection sleeve for probes Ø 3 mm 127
C
page
Connection sleeve for probes Ø 4.5 mm 128 Connection sleeve for probes Ø 7.5 mm 130, 132 Connection sleeve for probes Ø 9 mm 130, 132 Connection sleeve with rotator 130, 132 Connector for fine-wired highly flexible conductors 94 Contact files 208 Cord und cable grips 132 Cotton gloves for putting underneath 172 Counter hold spanners 1000 V 150 Covering blankets transparent 175 Crimp connector DIN 46267 Part 1 96, 99 Crimp connector DIN 48085, Part 1 96 Crimp connector, AL medium voltage 10-30 KV 105 Crimp connectors AL medium voltage 10-30 KV longitudinally sealed 105 Crimp fork terminals without insulation DIN 46234 87 Crimp insert for „Hirschmann“ contacts 30 Crimp insert for „Tyco“ contacts 30 Crimp inserts for „Huber & Suhner“ contacts 30 Crimp inserts for „multi-contact“ contacts 30 Crimp pin terminals without insulation DIN 46230 87 Crimp ring terminals without insulation DIN 46234 85 Crimp terminals DIN 46235 95, 97 Crimp terminals with 2 oval holes 98 Crimp-Grip pliers 28 Crimping dies 36, 45, 50, 51 Crimping dies DIN Cu + Al 45, 50 Crimping dies DIN Cu + Al for 216600 45, 50 Crimping dies for 215100 37 Crimping dies for 215200 38 Crimping dies for 215300 39 Crimping dies for 216236 54 Crimping dies for 216355 54 Crimping dies for 216600 50 Crimping dies for cable lugs / end sleeves 33, 43 Crimping dies for coaxial cable 33, 43 Crimping dies for end sleeves 33, 43 Crimping dies for flat connectors 33, 43 Crimping dies for insulated crimp cable lugs 33, 43 Crimping dies for Photovoltaik MC3 33, 43 Crimping dies for Photovoltaik MC4 33, 43 Crimping dies for shrink connectors 33, 43 Crimping dies for TWIN end sleeves 33, 43 Crimping dies for uninsulated terminals 33, 43 Crimping dies standard for 21 58 00 45 Crimping dies, DIN-connection, Cu 54 Crimping dies, standard 54 Crimping headstock 44 Crimping headstock „HKD400“ 53 Crimping headstock „KD300-6“ 52 Crimping headstock „KH-12“ 50 Crimping headstock „KO-6“ 46 Crimping pliers 24, 25,26, 27, 28, 29,30, 35, 36, 37, 38, 39 Crimping pliers „Multi“ 34 Crimping pliers Combi-Crimp 33 Crimping pliers for coax-connections 29 Crimping pliers for modular plugs 31, 32 Crimping pliers for shrink connectors 26 Crimping pliers for twin end sleeves 24 Crimping pliers X-Crimp 33 Crimping terminals and connectors, DIN 54 Crimpset „MULTI Photovoltaik“ 30 Crimpset MULTI 34 Cross connectors, standard series 92 Cross slotted screwdrivers 2C, Phillips 180, 181 Cross slotted screwdrivers 2C, Pozidriv 180, 181 Cross type socket wrenches 1000 V 150 Countersunk Screws assortment box 241 Cupal washer 104 Cutting pistol for PVC pipes 5
D Decoiler 1200 Decoiler 1200 + Decoiler 600 Deep hole marker Diamond cutting blades Diamond cutting blades, FL tiles Diamond cutting blades, TBM Turbo Diamond hollow core cutter special Diamond hollow core cutters Dies Dies for copper standard Dies for end sleeves Dies for rounding of square conductors Dies for sealing pliers Dies for Solar contacts Amphenol Dies for terminals and connectors DIN Dies for terminals and connectors standard Dies for tubular terminals „F-Type“
page 122 122 122 200 234 234 234 233 233 31, 32, 51 47 47 47 177 30 47 47 47
We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential.
D Dies for tubular terminals „Light T/M“ Dies for aluminium cable lugs Dies, metric thread Dispenser box with insulated end sleeves (DIN) Dispenser box with insulated end sleeves (french) Dispenser box with insulated end sleeves (german) Dispenser box with Twin end sleeves (DIN) Dispenser box with uninsulated end sleeves Dispenser for plastic bottle Double edged cable cutter Double ended ring spanner sets DIN 838 Double ended ring spanners to DIN 838 Double ended spanners acc. to DIN 3110 Double ended spanners set acc. to DIN 3110 Double faced sledges to DIN 6475 Double-locking-cable ties Dowel Mounting sockets/Christmas trees Drill for Diamond hollow core cutters Drill type machine bits for wood Drilling paste Dry wall screws Dust masks
E
page 47 47 232 65 65 65 65 65 133 144 190 190 190 190 207 113 114 233 227 231 238 173
page
Ear defenders acc. to EN 352 173 Ear muffs for helmet 173 Ear protection plugs 173 Elastic cable distributors 82 Elastic connectors with socket sleeves (male) 82 Electrical insulating tape for the professional application 124 Electrician‘s safety levels 157, 236 Electricians’ screwdrivers 2C 180, 181 Electricians protection visor acc. to EN 166 173 Electricians‘ boots acc. to EN 50321 Class 0 172 Electricians‘ protection helmets acc. to DIN EN 397 172 Electricians‘ scissors 5 Electricians’ chisels 206 Electro-hydraulic pump „PN700 l“ 55 Electro-hydraulic punching tool „AS-6“ 42 Electronic screwdriver set 183 Electronic screwing bit set 183 Elektro-hydraulic pump „PN-700“ 55 Empty dispenser box 65 End connectors 73 End sleeve assortment 66, 67 End sleeve assortment – serie DIN 67 End sleeves 60, 61 End sleeves DIN colour range 62, 63 End sleeves for short-circuit-proof cables 64 End sleeves in tape form, to DIN 46228 P. 4 62 End sleeves, colour range I, (french) 62, 63 End sleeves, colour range II, (german) 62, 63 Engineers‘ hammer 207 Engineers‘ hammer DIN 1041 207 Engineers’ squares 236 Engineers’ screwdrivers 2C 180, 181 Engraving for sealing pliers 177 ESD Electronic combination pliers 197 ESD Electronic flat nose pliers 197 ESD Electronic front cutter 197 ESD Electronic needle nose pliers 196 ESD Electronic needle nose pliers, 45° angle 196 ESD Electronic pliers set 197 ESD Electronic round nose pliers 197 ESD electronic screwdriver set 183 ESD electronic screwdrivers 182, 183 ESD Electronic side cutter without cutting-facet 197 ESD Electronic side cutters 197 ESD Electronic thin needle nose pliers 196 ESD Electronic thin needle nose pliers, 45° angle 196 Exchangeable „Vario“ handle 138 Extensions 152, 153, 154, 155, 156 Extensions with bit adapter 1000 V 154, 156
F
page
Fallstop acc. to EN 354 174 Figure tin snips 211 Files assortment 208 Firmer chisels DIN 5139 206 Fittings for hexagon socket screws 153, 154, 155, 156 Fittings‘ solder acc. to DIN 29453, solid 203 Fittings‘ solder acc. to DIN EN 29453 203 Flat bits 227 Flat cable pliers 20 Flat chisels to DIN 6453 A, flat oval shank 206 Flat nose pliers 1000 V 140 Flat terminals 73, 76, 77, 81, 82 Flatcable stripper 17 Flexible screwdrivers „Piccolo“ 183
F Focus torch Folding rules Fork terminals DIN 46237 Fork terminals without insulation DIN 46234 Front bulb with shackle M12 Front bulb with shackle M5 Front bulb with shackle M6 Front cable cutter Front cutters VDE Front/end sleeve M12 Front/end sleeve M5 Front/end sleeve M6 Front-Crimping pliers Fully insulating 1000 V PVC flat nose pliers
G
page 212 235 71, 74 87 130, 132 128 129 10 141 130, 132 127, 128 129 24, 25 140
page
Gloves in accordance with DIN EN 60903 172 Grease for soft soldering acc. to DIN 8511-F-SW 21 202 Grip pliers 198 Guides, metric 232 Guiding head Ø 10 mm with loop M5 127, 128 Guiding head Ø 13 mm with loop M5 127, 128 Guiding head Ø 6 mm with loop M5 127 Guiding head Ø 7 mm with loop M5 127, 128 Guiding head M6 129 Guiding head set with heads Ø 7, 10, 13 mm 128 Guiding head with loop M5 128 Guiding head with loop M6 129 Guiding role made from aluminium 129, 130, 132 Guiding role made from aluminium M5 128 Guiding role made from aluminium, length 80 mm 130, 132
H
page
Hacksaw „PUK“ 211 Hacksaw blades to DIN 6494 212 Hacksaw frame 212 Hacksaw frame 1000 V 145 Hammer handles to DIN 5111 B 207 Hand cable cutter 9 Hand saw „PUK“ 211 Hand taps DIN 352, type N/HSS 229 Handles with bit adapter 1000 V 152 Hard metal hole saw 234 HAUPA „Vario Plus“ 1000V replaceable blade system 161 HAUPA “Big Box” 217 HAUPA “Kick-Off Light“ 162 HAUPA “Kick-Off” 162 HAUPA “Multi Check” digital high-capacity multimeter 148 HAUPA “Multi Clamp” digital miniature clamp transducer AC/DC 600V 148 HAUPA „Bit box“ 187 HAUPA „Tool bag“ 217 HAUPA „Tool Jacket“ 219 HAUPA „Trend Box Plus“ 218 HAUPA „Trend Box“ 218 HAUPA Belt bag “Tool belt” 217 HAUPA Crimp System for Photovoltaics 30 HAUPA Electronic screwdriver set standard 183 HAUPA Elektrik Crimper 34 HAUPA Pneumatic Crimpers 25 HAUPA Pneumatic crimpes table top versions 25 HAUPA ratchet screwdriver „Flex“ 188 HAUPA Tool bag 1000 V 170 HAUPA Tool bag „Tool Pouch“ 216 HAUPA Tool bag VDE 170 HAUPA Tool belt “Tool Pouch” 216 HAUPA Tool belt „Standard“ 217 Heat protection gloves acc. to EN 407 411 172 Heat shrinkable tubes 121 Heavy duty side cutters DIN 5238 A VDE 139 Heavy duty side cutters DIN 5749 194 Hemp tackle block ropes 178 Hexagon sockets 156 Hexagon sockets 1000 V 152, 153, 154, 155, 156 Hexagon sockets DIN 7448, extra long, 1000 V 156 Hexagonal machine screws 239 Hexagonal nut DIN 934 240 Hexagonal wood screws 238 Hexagonal wood screws, hot zinc dipped 238 Holding device 1000 V 157 Hole-cutting tin snips 211 Hollow core cutters 233 Hook-and-loop cable ties 114 Hooks 238 Household hatchet 206 HSS Tap set 230 HSS taps ”Direct cutter” 228 HSS taps set 229 HSS-Bi-metal hole saw set cogging 234
H
page
Hydraulic cable cutters Hydraulic crimping headstock + cylinder „KH-45“ Hydraulic crimping headstock „KC25-12“ Hydraulic crimping headstock „KC42-12“ Hydraulic crimping headstock „KH-25“ Hydraulic crimping headstock set Hydraulic cutter Hydraulic cutting headstock Hydraulic foot pump „F-700“ Hydraulic hand pliers „HC25-12“ Hydraulic hand pliers „HC42-12“ Hydraulic hand pliers „HD300-6“ Hydraulic hand pliers „HD400-6“ Hydraulic hand pliers „HH-12“ Hydraulic hand pliers „HH-6“ Hydraulic hand pliers „HO-6“ Hydraulic hand pliers „MO-6“ with exchangeable dies Hydraulic hand-punch-cutter „HS-6“ Hydraulic hand-punching tool „HS-8“ Hydraulic high-pressure hose Hydraulic oil Hydraulic safety cutting fittings Hydraulic safety life line cable cutter
12 54 48 49 54 54 12 12 55 48 49 52 53 50 45 46 46 42 42 55 53 12 12
I
page
Industrial cleaning wipes Industrial hot air blower for shrink hoses Industrial screwdriver set with replaceable dual blades Infrared thermometer Inserts for hexagon socket screws 1000 V Insulated crimp cable lugs Insulated tweezers VDE 1000 V Insulating floor mats acc. to IEC-61111-Class 2 Insulating floor mats acc. to VDE 0303 Insulating sleeves Insulator cover for gable insulators 1000 V ISO nailing clips
J
page
Jointing chisel Junior hacksaw Junior hacksaw DIN 6473 C
K
206 211 211
page
Kabeleinziehgerät Economy Kevlar cutter Keys set Tx
L
127 5 184
page
Lead seals Locked torque wrench 1000 V Long chain nose pliers DIN 5236 A VDE Long chain nose pliers DIN ISO 5745 VDE Long chain nose pliers DIN ISO 5754 VDE Long chain nose pliers DIN 5745 Long flat nose pliers DIN 5745 Long round nose pliers DIN 5745 Loose knives
M
201 121 182 149 152 86 157 175 175 82 176 118
177 154, 156 139, 141 143 143 195 194 195 20
page
Machine screw counter sunk 239 Magazine for Quadro 25 Magnetic holder 187 Magnetic retriever 184 Mains adapter 53 Marking chalk 200 Masonry drill bit 227 Masonry drills DIN 8039 227 Measuring tapes 235 Metal box 36, 37, 38 Microelectronic side cutters 198 Mini torch 212 Miniature trimming set 184 Mix Tx plus Screws assortment box 241 Mix Tx Screws assortment box 241 Mix Screws assortment box 240 More possibilities of dies - please, order separately 34 Mounting screws 239
... convincing solutions 243
Index N Nailing clips for flat cable Nailing clips for round cable Network range Network service case „Connect” Network service case HAUPA Network-Servicecase NH-protecting caps 1000 V Nipple threading dies No.1-Cat
O Open-jawed ring wrench with ratch function Optical fibre stripper
P Paint scrapers Pan head Screws assortment box Parallel connectors Parallel connectors DIN 46341 part 1, type A Parallel rope tension clamps PC Cat PC-Strip Perlon fish tapes Personal safety set Piercing awls 2C Pin punch set Pin terminals without insulation DIN 46230 Pipe cleaning brush Pipe wrenches Plan grip pliers VDE Plaster cups Plaster pan Plastic clips 1000 V Plastic hammer Plastic seal wire Plastic seals Plastic wedges Plate screw DIN 7504 Plate screw DIN 7504, Tx Pliers set 2C Pliers set, 2-coloured coating-insulation Pliers set VDE 2C, sheathed handles Polyethene spiral binding Precision pocket vernier calipers „digital“ Precision pocket vernier calipers „Stainless“ Precision stripper for optic fibres Precision stripper PWS Plus Pulling unit with loop M5 Punching dies, metric Punching dies, PG Punching dies, square PVC hammer 1000 V
Q Quadro complete set in case Quadro with magazine Quick charger
R
page 117 117, 118 32 221 220 221 176 232 18
page 190 18
page 200 240 72, 75 88 178 18 18 126 175 182 206 87 130, 132 198 143 200 200 176 207 177 177 157 239 239 195 142 140 122 236 236 18 18 127 42 42 42 157
page 25 25 53
page
Rainbow-Pack 124 Rapid connectors 73 Ratchet ring spanners 1000 V 151 Ratchet wrenches 229 Reducing crimp connector AL medium voltage 10-30 KV, longitudinally sealed 106 Releasable cable ties 113 Replacement blades, 4-pcs. 146 Replacement glass fibre rod 127 Replacement glass fibre rod FIX 130 Replacement glass fibre rod FOX 128 Replacement glass fibre rod POWER 131 Replacement glass fibre rod SIX 129 Replacement glass fibre rod STRONG 131 Replacement heads 6, 7, 207 Reversible ratchet 1000 V 152, 153, 154, 155, 156 Right angle allen keys 1000 V 150 Ring spanners 1000 V 151 Ring terminals 77, 81 Ring terminals DIN 46237 71, 74 Riveting pliers 198 Riveting tool set 198 Rotating head lamp 212 Round pins 72 Round pins 75 Round sleeves 73 Round sleeves 76 Round terminals 76
244
R Round terminals Rubber hand guard Rubber towels acc. to VDE 0680/1 Rundsteckhülsen
S
page 73 206 175 76
page
Safety belts acc. EN 358 174 Safety classes acc. to EN 166 173 Safety classes acc. to EN 166 with UV filter 173 Safety fuse grips 172 Safety harness DIN EN 361 175 Safety Jacket IPS acc. to DIN VDE 0680 part 1 E 174 Safety ropes acc. to A-DIN 83330 174 Safety trousers IPS acc. to DIN VDE 0680 part 1 E 174 Safety-face masks acc. to EN 166 172 Safety-sets VDE/GS 174 Screw extractor set 229 Screw punches 232 Screw type sockets 114 Screwdriver bits 186, 187 Screwdriver bits Tx 187 Screwdriver bits, red. 186 Screwdriver set with PZ slot profile 136 Screwdriver set 2C 181 Screwdriver set 2C, Tx 181 Screwdrivers 2C, Tx 180 Screwdrivers 2C, Tx with security pin 180 SDS hammer drill bits 228 SDS magnetic holder 187 SDS-hammer drill sets 228 SDS-Nut-hammer drill sets 228 Seal wire 177 Sealing pliers 177 Self adhesive PVC tape 176 Self adhesive sockets 114 Sensor Tool LSA 18 Service set for HAUPA-FIBRE 127 Set of cone drills/HSS 230 Set with protective gloves EN 60903 172 Shank for hollow core cutters 233 Shank for hollow core cutters, SDS-Plus 233 Shank for hollow core cutters, SW 12 233 Short flat nose pliers DIN 5258 VDE 139, 141 Short flat nose pliers DIN ISO 5745 VDE 143 Short round nose pliers DIN 5257 VDE 139, 141 Side cutters 2C, DIN 5749 194 Side cutters DIN 5238 B VDE 139, 141 Side cutters DIN ISO 5749 VDE 143 Side cutting pliers with stripping function 139 Siedge hammer to DIN 6475 207 Single ended spanners 1000 V 150 Single ended tool set acc. to VDE 1000 V 168 Sledge handles to DIN 5135 A 207 Slide Box with DIN end sleeves 66 Slide Box with DIN TWIN end sleeves 66 Slip on bushes 1000 V 176 Small tube cutter 211 Socket cup screw DIN 84 Form A 239 Socket set 191 Socket sleeves (female) 72, 75, 77 Socket sleeves (female) with branch 72, 75 Socket sleeves (female) with cable stop 80 Socket sleeves (female) fully-insulated 73, 76 Socket sleeves (male) DIN 46231 71, 74 Socket sleeves (male) with latching tongue 81 Socket T-wrench 1000 V 152, 153, 154, 155, 156 Socket wrenches 2C 182 Socket wrenches set 2C 182 Solder for electronic work acc. to DIN EN 29453 203 Solder in triangular sticks DIN 1707 202 Solder wire according to DIN EN 29453 204 Soldering fluid acc. to DIN 8511-F-SW 32 202 Soldering fluid acc. to DIN 8511-F-W 21 202 Soldering grease for fittings acc. to DIN 8511-F-W 22 202 Soldering irons 202 Soldering paste acc. to DIN 8511-F-SW 26 202 Soldering set 202 Soldering stone 202 Solderless butt connectors DIN 46341 part 1, type B 88 Solderless terminals for meter connection 86 Spacer bushing 42 Spanners for switch-cabinets 191 Spare blades 5, 17, 21, 210 Spare blades hook form 210 Spare blades straight form 210 Spare cutting head 145 Spare screws 232 Special cable cutter 9, 10 Special fast glue for glass fibre rod Ø 3 mm 127 Special pulling aid 127
S
page
Special pulling aid Spiral fish tapes Spring washers Steel cable ties, 316 (V4A) Steel cable ties, SS 316 Steel fish tapes Steel point scribers Steel stamp, figures (0 - 9) DIN 1451 Steel stamp, letters (A - Z), DIN 1451 Step drills /HSS Step drills assortiment/HSS Stone chisels, flat oval shank Stone chisels, octagonal shank Stripper “Coaxi“ Stripper for coaxial cable Stripper for UTP-/STP-data cable Stripper standard Stripping pliers Stripping pliers 1000 V Stripping tool for medium-high voltage cable Stubby gasifier cross slot screwdrivers 2C, Phillips Stubby gasifier screwdrivers 2C Super wire stripper
127 126 240 116 116 126 236 204 204 231 231 206 206 17 17, 18 18 17 16 144 16 182 181 19
T
page
Tackle blocks 178 Tapping screws 239 Taps for armoured steel conduits, metric thread 232 T-connectors, standard series 92 Template for four mandrel pressing 53 Tensioning tools for cable ties 115 Tensioning tools for steel cable ties 116 Test pin 53 T-handle allen keys 1000 V 150 T-Handle socket wrenches 1000 V 150 The ideal tool assortment 223 Tool belt „Basic“ 219 Tool belt „VDE Plus“ 170 Tool belt „VDE“ 170 Tool belts 219 Tool case „HAUPA – Lifesaver“ 1000 V 167 Tool case „Start up“ empty 220 Tool case 1000 V 153, 155, 160, 161 Tool case “2 component” 222 Tool case “Start-up VDE” 163 Tool case “Start-up” 221 Tool case „Achat“ 214 Tool case „Akkurat“ 222 Tool case „Aktion“ 220 Tool case „Alpha“ 215 Tool case „Basic VDE“ 163 Tool case „Basic“ 221 Tool case „Biber“ 1000 V 160 Tool case „Comet“ 214 Tool case „Compact“ 223 Tool case „Delux Plus“ 1000 V 163 Tool case „Delux“ 1000 V 162 Tool case „Diamant“ 222 Tool case „EXTRA“ 166 Tool case „Favorit - Admiral - Profi“ 214 Tool case „Inspektor“ 222 Tool case „Leopard“ 164 Tool case „Magister“ 168 Tool case „Merkur Plus“ 223 Tool case „Merkur“ 220 Tool case „Novelle 1“ 215 Tool case „Omega“ 220 Tool case „Panther“ 223 Tool case „Pendant“ 168 Tool case „Phoenix“ 216 Tool case „Power Pack“ 164 Tool case „Profi VDE“ 164 Tool case „Real“ 1000 V 160 Tool case „Rotor“ 1000 V 163 Tool case „Saphir“ 215 Tool case „Start VDE“ 162 Tool case „Start“ 215 Tool case „Tradition“ and „Fan“ 214 Tool case „Venus Plus“ 1000 V 164 Tool case „Venus“ 168 Tool case trolly 220 Tool case trolly „EXTRA“ 165 Tool case trolly „Fly“ 220 Tool case trolly „Master“ 1000 V 165 Tool case trolly „Start up“ 1000 V 166 Tool cases „Tool bag“ 217 Tool wallets 214 Torped-level 236 Torque stoppers 1000 V 154 Torque wrenches 1000 V 152, 154, 156
We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential.
T
page
Travelling safety device DIN 353-2, Type ASK 1 175 Tube cutter 211 Tubular cable lugs assortment DIN 46235 108 Tubular cable lugs assortment standard 108 Tubular cable lugs for fine-wired, high flexible conductors 94 Tubular cable lugs of pure nickel, ring type 100 Tubular cable lugs, standard series 89 Tubular notched terminals for fine-wired highly flexible 94 Tubular terminals of pure nickel, forke type 100 Tubular terminals, forke type, of pure nickel 100 Tubular terminals, nylon-insulated, standard series 93 Tubular terminals, ring type, of pure nickel 100 Tubular terminals, standard series 89, 90 Tubularcable lugs, nylon-insulated, standard series 93 Tweezers 198 Twin-end sleeves 64 Twin-end sleeves two cables DIN 64 Twin-end sleeves, colour range I (french) 64 TwinSpeed self tapping screw 239 Twist drills DIN 338/HSS type N 226
U Universal countersunk screw Universal pan head screws Universal stripper Utility knives Utility knives „EXTRA“ with spare blades Utility metal knives
V „Vario“ 1000 V replaceable blade set – Pozidriv „Vario“ 1000V replaceable blade set – Phillips „Vario“ nylon bag – empty „Vario“ replaceable blade – Phillips blade „Vario“ replaceable blade – pozidrive blade „Vario“ replaceable blade – pozidrive blade/slotted „Vario“ replaceable blade – slotted blade „Vario“ replaceable blade – torx blade „Vario“ switch cabinet key – Double-bit „Vario“ switch cabinet key – Square „Vario“ switch cabinet key – Triangular VDE 2-component screwdriver with PZ slot profile VDE cross slotted screwdrivers 2C, Phillips VDE cross slotted screwdrivers 2C, Pozidriv VDE electricians’ screwdrivers 2C VDE screwdrivers set 2C VDE screwdrivers 2C, Tx VDE socket wrenches 2C, DIN 7445 VDE socket wrenches set 2C, DIN 7445 VDE ratchet cable cutter with cover 1000 V VDE security set 1000 V VDE/GS - Tool sets 1000 V VDE/GS-Voltage testers, VDE-tested 0426/72 Voltage tester Voltage tester „Basic +“ Voltage tester „Basic“ Voltage tester “Profi LCD plus” Voltage tester “Profi plus” Voltage tester “TestPen Basic” Voltage tester “TestPen” Voltage tester VDE/GS Voltage testers VDE/GS
W Warding files DIN 7283 Washers Washers DIN 125 Water brushes Water pump pliers Water pump pliers Water pump pliers DIN 5231 Water pump pliers VDE Water pump pliers 2C, DIN 8976 Water-based lubricants and slip agents Wedges Welded shrink connector Wire brushes Wire cutter Wire rope and cable cutter 1000 V Wire stripper / Solar Wire stripper „High Strip“ Wire strippers, sensor special Wire stripping pliers DIN 5232 VDE Wire stripping pliers DIN 5232 VDE Wire stripping pliers DIN 5232 VDE Wire stripping pliers DIN 7168
page 238 238, 239 17 210 211 210
page 138 138 138 138 138 138 138 138 138 138 138 136 137 137 137 137 137 137 137 145 168 168 186 186 148 149 147 147 149 149 186 149, 186
page 208 240 240 200 142 195 142 140 195 133 157 77 200 7 145 20 19 21 141 143 139 195
... convincing solutions 245
Index Art. no. 100241 100243 100249 100250 100252 100257 100259 100261 100364 100366 100368 100585 100590 100592 100594 100596 100598 100600 100602 100606 100610 100612 100614 100630 100632 100633 100634 100635 100636 100640 100645 100646 100647 100648 100649 100650 100666 100680 100684 100694 100696 100700 100704 100704 A 100712 100713 100714 100715 100716 100718 A 100720 100721 100723 100728 100729 100729 A 100734 100736 100738 100741 100742 100902 100903 100904 100905 100906
246
page 182 182 182 182 182 182 182 182 183 183 184 185 185 185 185 185 185 185 185 185 185 185 185 184 184 184 184 184 184 184 186 186 186 186 186 186 149 184 184 184 184 149 182 182 183 183 182 182 182 183 183 183 183 182 182 182 183 182 183 183 183 185 185 185 185 185
Art. no. 100908 100909 100915 100917 100941 100943 101200 101202 101204 101206 101208 101210 101211 101212/S 101229/6 101230 101484 101486 101488 101490 101492 101494 101496 101500 101502 101510 101520 101521 101522 101524 101526 101528 101530 101532 101534 101536 101538 101540 101541 101542 101544 101546 101548 101550 101552 101554 101560 101562 101604 101606 101608 101610 101612 101614 101640 101642 101644 101646 101648 101650 101684 101686 101688 101690 101850 101852
page 185 185 185 184 185 184 180 180 180 180 180 180 180 181 180 180 182 182 182 182 182 182 182 182 182 182 181 181 181 181 181 181 181 181 181 181 181 181 181 181 181 181 181 181 181 181 181 181 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 137 137
Art. no. 101854 101856 101858 101860 101862 101864 101866 101870 101872 101874 101876 101879 101910 101912 101914 101916 101918 101920 101922 101924 101940 101942 101944 101946 101950 101952 101954 101956 101999 101999/PZ 102000 102000/PZ 102001 102002 102004 102005 102006 102008 102010 102012 102014 102016 102017 102018 102020 102022 102030 102032 102034 102036 102040 102042 102050 102060 102062 102064 102066 102068 102070 102072 102075 102110 102112 102114 102116 102118
page
Art. no.
page
137 137 137 137 137 137 137 136 136 187 187 136 137 137 137 137 137 137 137 137 137 137 137 137 137 137 137 137 137 137 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 161 138 138 138 138 138 138 138 149 186 186 186 186 187
102120 102122 102124 102126 102130 102131 102132 102134 102152 102154 102155 102156 102158 102160 102162 102164 102166 102168 102170 102172 102174 102176 102178 102180 102182 102184 102186 102188 102190 102192 102194 102196 102198 102200 102202 102204 102208 102210 102512 102520 102522 102524 102526 102528 102530 102532 102534 102536 102538 102540 102612 102614 102616 103080 103082 103120 103122 103470 103472 103800 103810 103812 103814 103816 103818 103820
187 187 187 187 187 187 187 187 186 186 186 186 186 186 186 186 186 186 186 186 186 187 187 187 187 187 187 187 187 187 187 187 187 187 187 187 187 187 137 137 137 137 137 137 137 137 137 137 137 137 180 180 180 182 182 181 181 182 182 148 148 148 149 149 149 147
Art. no. 103822 104000 104002 104004 104005 104006 104008 104010 110000 110002 110004 110006 110008 110010 110012 110022 110024 110026 110028 110030 110032 110034 110036 110039/EN 110040/EN 110042 110044 110046 110048 110050 110052 110054 110055/EN 110056/EN 110058/EN 110060 110062 110064 110065/EN 110066/EN 110067/EN 110068/EN 110070 110074 110076 110078 110080 110081 110083 110084 110085 110087 110089 110090 110091 110092 110093 110094 110095 110096 110097 110099 110100 110104 110108 110112
page 147 183 183 183 188 188 182 183 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 154 156 150 150 150 150 150 150 150 154 154 156 150 150 150 154 156 156 156 150 150 150 150 150 150 150 150 150 150 150 190 150 190 150 190 150 190 150 150 190 190 190 190
Art. no. 110114 110120 110130 110132 110140 110142 110144 110146 110148 110152 110154 110160 110164 110170 110172 110180 110182 110184 110186 110188 110190 110192 110194 110196 110198 110202 110204 110206 110212 110216 110222 110250 110252 110260 110262 110264 110266 110268 110270 110272 110274 110276 110278 110280 110282 110284 110286 110288 110290 110300 110302 110304 110306 110308 110310 110312 110314 110316 110318 110320 110322 110324 110331/EN 110332/EN 110335/EN 110336/EN
page 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 151 151 151 151 151 151 151 151 151 151 151 151 151 154 156 154 156
We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential.
Art. no. 110337/EN 110338/EN 110339/EN 110340/EN 110342/EN 110344/EN 110346/EN 110348/EN 110350/EN 110352/EN 110354/EN 110356/EN 110358/EN 110360/EN 110362/EN 110363/EN 110364/EN 110365/EN 110366/EN 110367/EN 110368/EN 110369/EN 110371/EN 110373/EN 110374/EN 110375/EN 110376/EN 110377/EN 110378/EN 110379/EN 110456/EN 110457/EN 110458/EN 110555 110556 110557 110558 110559 110583 110585 110590 110592 110594 110596 110674 110676 110677 110678 110696 110700/EN 110702/EN 110704 110705 110810 110812 110814 110816 110818 110820 110822 110824 110826 110828 110830 110832 110834
page 154 156 156 156 156 156 156 156 156 156 156 156 156 156 156 154 154 154 154 154 154 154 154 156 156 156 156 156 156 156 154 154 154 151 151 151 145 145 191 191 191 191 191 191 191 191 191 191 191 154 154 157 157 152 152 152 152 152 152 152 152 152 152 152 152 152
Art. no. 110836 110838 110840 110842 110844 110846 110848 110860 110861 110862 110864 110866 110868 110870 110872 110874 110876 110878 110880 110882 110884 110886 110888 110890 110892 110900 120002 120003 120004 120005 120006 120006 561 120006 564 S 120006 587 120007 120007/1 120008 120008 GELB 120008 ROT 120008 WEISS 120010 120011 120012 120014 120015 120016 120017 120018 120020 120022 120029 120030 120031 120033 120037 120040 120042 120044 120046 120048 120049 120050 120051 120052 120057 120058
page
Art. no.
page
152 152 152 152 152 152 152 152 154 156 152 152 152 151 151 151 151 151 151 151 151 151 151 151 151 190 157 172 172 172 172 172 172 172 172 172 172 172 172 172 172 172 172 172 172 172 172 172 174 174 172 175 175 175 172 175 175 175 175 175 176 176 140 140 176 176
120059 120060 120062 120064 120069 120070 120071 120072 120073 120074 120077 120078 120079 120087 120088 120089 120093 120094 120095 120096 120097 120098 120099 120100 120102 120103 120111 120112 120115 120116 120117 120120 120122 120200 130004 130006 130042 130044 130064 130066 130068 130200 130201 130202 130203 130204 130206 130208 130209 130210 130211 130212 130214 130300 130302 130304 130306 140180 140182 140190 140192 140210 140214 140216 140218 140220
176 176 176 176 176 176 176 176 176 176 176 176 176 173 173 176 173 157 176 176 157 157 157 157 157 157 173 173 173 173 173 173 173 175 178 178 178 178 178 178 178 204 204 204 204 204 204 204 204 204 204 204 204 212 212 212 212 232 232 232 232 232 232 232 232 232
Art. no. 140222 140224 140226 140228 140230 140232 140234 140236 140238 140240 140242 140244 140246 140248 140250 140252 140254 140256 140258 140260 140262 140510 140520 140530 143000 143002 143002/ECO 143004 143006 143008 143010 143012 143014 143016 143018 143020 143024 143026 143028 143030 143050 143052 143054 143056 143058 143060 143062 143064 143066 143068 143070 143072 143100 143102 143104 143105 143106 143108 143110 143111 143112 143114 143116 143117 143118 143120
page
Art. no.
page
232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 200 200 200 127 127 127 127 127 127 127 128 128 127 127 127 127 127 127 128 128 128 128 128 128 128 128 128 128 128 128 128 129 129 129 129 129 129 129 129 129 129 129 129 129 129
143122 143124 143126 143128 143130 143132 143134 143136 143150 143152 143154 143156 143158 143160 143162 143164 143166 143168 143170 143172 143174 143176 143178 143180 143182 143184 143186 143187 143188 143190 143192 143194 143196 143198 143200 143202 143204 143210 143212 143214 143216 143218 143220 143222 143224 143226 143228 143230 143232 143250 143252 143254 143256 143258 143260 143262 143264 143266 143270 143272 143274 143276 143278 143280 143300 143302
129 129 129 129 129 129 129 129 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 132 132 132 132 132 132 132 130 132 132 132 132 132 132 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 131 132 131 131 131 131 131 131 132 132
Art. no. 143304 143306 143308 143310 143312 143314 143316 143318 143320 143322 143324 143326 143328 143330 143332 143334 143336 143338 143340 143342 143344 143346 143348 143398 143400 143402 143404 143406 150002 150004 150006 150008 150015 B 150015 G 150015 R 150018 150018 BLAU 150018 ROT 150019 150023 150024 150025 150026 150028 150036 150037 150038 150090 150152 150154 150156 150158 150200 150202 150204 150206 150208 150210 150220 150222 150224 150226 150228 150230 150232 150234
page 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 133 133 133 122 122 122 122 122 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 157 157 157 200 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126
247
Index Art. no. 150236 150238 150239 150240 150241 150243 150245 150247 150258 150262 150264 150266 150268 150270 150274 150275 150276 150277 150278 150279 150280 150286 150288 150300 150302 150304 150306 150308 150310 150312 150314 150316 150318 150320 150322 150340 150342 150343 150344 150345 150360 150362 150364 150366 150368 150370 150375 BLAU 150375 GRÜN 150375 ROT 150377 150450 150452 150454 150456 150458 150462 150464 150466 150468 150470 150476 150478 150480 150482 150600 160000
248
page
Art. no.
page
Art. no.
page
126 126 126 174 126 126 126 126 175 174 174 174 174 175 174 175 175 175 175 175 174 174 174 174 175 175 175 175 175 175 175 175 175 175 175 177 177 177 177 177 177 177 177 177 177 177 177 177 177 173 126 126 126 126 126 126 126 126 126 126 126 126 126 126 201 203
160002 160004 160006 160008 160012 160014 160016 160018 160020 160022 160024 160026 160028 160030 160042 160044 160046 160050 160052 160054 160060 160062 160070 160072 160074 160080 160082 160090 160092 160094 160096 160100 160102 160112 160114 160116 160130 160142 160144 160146 160150 160190 160234 160402 160404 160406 160408 160412 160414 160416 160418 160420 160422 160424 160426 160430 160442 160444 160446 160450 160452 160454 180008 180010 180012 180042
203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 202 202 202 202 202 202 202 202 202 202 202 202 202 202 202 202 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 204 206 206 206 206
180044 180062 180064 180076 180082 180084 180090 180092 180094 180110 180120 180170 180173 180182 180184 180186 180188 180200 180202 180232 180274 180276 180290 180292 180295 180297 180300 180302 180321 180323 180334 180346 180372 180374 180378 180390 180392 180464 180466 180468 180470 180474 180500 180502 180504 180506 180508 180510 180512 180513 180514 180515 180516 180517 180518 180519 180520 180521 180523 180525 180530 180532 180534 190120 190126 190130
206 206 206 206 206 206 206 206 206 206 206 206 206 207 207 207 207 207 207 207 207 207 207 207 157 157 207 207 206 207 207 207 207 207 207 207 207 206 206 206 206 206 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 232 208 208 208
Art. no. 190132 200000 200002 200003 200004 200005 200007 200008 200009 200010 200011 200012 200013 200014 200016 200018 200022 200023 200023/M 200024 200025 200025/KL 200026 200027 200028 200030 200031 200032 200033 200035 200036 200037 200038 200039 200040 200042 200043 200044 200046 200051 200057 200062 200064 200066 200067 200068 200069 200072 200073 200073/MK 200076 200081 200081/MK 200086 200086/VDE 200087 200088 200088/VDE 200089 200095 200095/MK 200099 200099/MK 200100 200102 200104
page
Art. no.
page
208 146 146 146 146 146 146 210 146 210 210 210 146 210 210 210 17 17 17 17 210 210 210 210 210 210 17 210 18 17 17 17 17 18 17 17 17 17 17 211 19 5 5 5 18 18 18 5 6 6 7 145 145 6 144 6 6 144 9 6 6 6 6 7 7 7
200105 200109 200110 200111 200112 200113 200114 200115 200116 200119 200120 200123 200124 200126 200127 200128 200129 200130 200131 200132 200140 200141 200149 200151 200153 200154 200155 200170 200173 200175 200177 200178 200179 200181 200183 200185 200187 200188 200190 200192 200194 200196 200197 200214 200215 200216 200217 200280 200284 200285 200286 200288 200290 200292 200304 200310 200520 200522 200524 200526 200528 200622 200630 200632 200634 200636
6 145 145 8 8 8 8 9 9 9 144 145 10 10 144 144 144 145 10 145 211 145 144 10 5 211 5 7 7 7 8 10 9 7 9 5 16 16 211 211 211 211 7 5 5 5 5 211 211 211 211 211 211 211 212 212 16 16 16 16 16 18 18 18 18 17
Art. no. 200637 200638 201000 201002 201002/VDE 201010 201012 201085 201086 201087 201088 210052 210053 210054 210056 210058 210067 210068 210100 210102 210110 210117 210119 210157 210158 210263 210264 210265 210266 210267 210270 210296 210297 210298 210299 210300 210301 210302 210303 210313 210350 210388 210390 210394 210396 210398 210556 210562 210583 210584 210588 210592 210594 210596 210616 210617 210618 210620 210624 210644 210648 210681 210682 210682/1 210682/2 210682/3
page 18 18 6 6 144 146 146 6 6 6 6 194 194 194 141 141 194 194 141 141 141 141 141 194 194 143 143 143 143 143 141 141 143 143 143 143 143 143 141 194 195 141 141 195 195 195 198 198 142 195 142 198 198 198 195 195 195 19 19 195 141 20 25 25 25 25
We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential.
Art. no. 210683 210684 210685 210686 210690 210691 210692 210693 210695 210695/E 210696 210696/2 210697 210699 210700 210702 210704 210710 210712 210714 210729 210731 210732 210733 210761 210761/E 210762 210762/E 210763 210763/E 210764 210764/E 210765 210765/E 210767 210767/E 210768 210768/E 210770 210772 210774 210776 210777 210778 210779 210784 210784/E 210785 210786 210788 210788/E 210789 210789/E 210791 210799 210802 210804 210805 210805 K 210808 210810 210819 210820 210824 210826 210827
page 19 19 20 20 21 19 19 21 20 20 20 20 21 21 177 177 177 177 177 177 21 177 177 177 26 33 28 33 24 33 27 33 24 33 29 33 24 33 198 35 35 198 28 27 27 33 33 28 28 25 44 25 44 35 27 26 24 35 35 26 27 24 24 24 24 26
Art. no. 210827/E 210830 210830/E 210833 210834 210836 210838 210840 210841 210842 210842/E 210845 210849 210850 210853 210857 210865 210867 210869 210871 210971 210973 210979 210979/A 210979/B 210981 211060 211062 211064 211080 211200 211202 211203 211204 211206 211207 211208 211210 211212 211214 211216 211217 211219 211221 211223 211225 211226 211228 211650 211652 211656 211657 211657/E 211658 211659 211659/E 211660 211662 211664 211666 211668 211672 211672/E 211674 211674/E 211676
page 44 35 44 28 35 35 35 35 24 24 33 26 29 35 35 31 31 31 31 31 31 31 25 25 25 31 157 157 157 198 139 139 139 139 139 139 139 139 139 139 139 139 139 140 140 140 140 140 24 24 29 30 33 29 30 33 29 29 28 28 28 24 33 24 33 24
Art. no. 211676/E 211678 211678/E 211680 211680/E 211682 211683 211684 211686 211690 211695 211695/E 211708 211720 211722 211850 211852 211854 211856 211858 211860 211862 211864 211866 211868 211870 211872 211874 211875 211876 211880 211928 211928/1 211930 211930/1 211932 211960 211962 211964 211965 211968 211969 211970 211971 211972 211973 211974 211980 211981 211982 211983 211985 211990 211991 211992 211993 211994 211995 211996 211997 212005 212007 212008 212200 212206 212208
page
Art. no.
page
Art. no.
page
Art. no.
page
33 24 33 29 33 28 144 28 28 33 26 43 198 198 198 196 196 196 196 196 196 196 196 197 197 197 197 197 197 197 197 21 21 21 21 21 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 30 34 34 30 30 30
212210 212212 212214 212216 212218 212222 212226 212228 212376 212380 212382 212384 212388 212390 212392 212394 212396 213000 213002 213004 213006 213008 213010 213012 213014 213020 213022 213024 213026 213028 213030 213032 213034 213036 213038 213040 213042 213044 213046 213048 213050 215000 215002 215004 215006 215008 215010 215012 215014 215016 215018 215020 215022 215024 215026 215028 215030 215032 215034 215036 215038 215040 215042 215044 215046 215048
30 30 30 30 30 30 30 30 54 54 54 54 54 54 54 54 54 31 31 31 31 31 31 31 31 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 31 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36
215050 215100 215102 215104 215106 215108 215110 215112 215114 215116 215118 215120 215122 215124 215126 215128 215130 215142 215144 215146 215148 215150 215152 215154 215156 215164 215166 215168 215170 215172 215200 215201 215202 215203 215204 215205 215206 215207 215208 215210 215212 215214 215216 215218 215220 215222 215224 215226 215228 215230 215232 215234 215236 215238 215240 215242 215244 215246 215248 215250 215252 215254 215256 215258 215260 215262
36 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 37 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38
215264 215300 215302 215304 215306 215308 215310 215312 215314 215316 215318 215320 215322 215324 215326 215328 215330 215332 215334 215336 215338 215340 215342 215348 215350 215352 215354 215356 215358 215360 215362 215364 215509 215800 215852 215854 215856 215858 215859 215860 215861 215862 215864 215866 215868 215869 215870 215872 215880 215881 215946 215980 216004 216005 216008 216010 216012 216014 216016 216018 216020 216022 216024 216026 216028 216030
38 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 53 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 50 50 48 49 50 50 50 50 50 50 50 50 50 50 50 50
249
Index Art. no. 216036 216038 216040 216042 216042/AL 216044 216044/AL 216046 216046/AL 216048 216048/AL 216050 216052 216052/AL 216054 216054/AL 216056 216056/AL 216060 216060/AL 216064 216065 216066 216067 216068 216069 216070 216071 216072 216074 216076 216078 216080 216082 216084 216086 216088 216090 216092 216094 216096 216098 216100 216112 216114 216116 216118 216120 216124 216125 216126 216128 216130 216132 216134 216136 216138 216140 216142 216148 216150 216152 216154 216156 216160 216162
250
page 50 50 50 50 51 50 51 50 51 50 51 50 50 51 50 51 50 51 50 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 48 49 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51 51
Art. no. 216164 216166 216168 216170 216172 216174 216176 216178 216236 216238 216240 216242 216244 216250 216252 216253 216254 216304 216306 216308 216310 216312 216314 216316 216318 216320 216322 216324 216326 216328 216330 216332 216334 216336 216338 216340 216348 216352 216354 216355 216356 216402 216404 216408 216410 216415 216416 216416/850 216417 216418 216419 216421 216422 216424 216426 216428 216430 216503 216601 216620 216622 216624 216660 216660/B 216660/L 216661
page 51 51 51 51 51 51 51 51 54 55 55 55 55 54 53 53 53 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 55 55 55 54 55 12 12 12 12 12 12 12 12 13 13 12 13 13 13 13 13 50 48 48 49 49 52 53 53 53
Art. no. 216662 216664 216665 216666 216800 216801 216802 216804 216806 216807 216808 216810 216812 216814 216816 216818 216820 216822 216824 216826 216828 216830 216832 216834 216836 216838 216840 216840/AL 216842 216842/AL 216844 216844/AL 216846 216846/AL 216848 216850 216850/AL 216852 216852/AL 216854 216854/AL 216856 216856/AL 216858 216860 216862 216864 216866 216868 216870 216872 216874 216876 216878 216880 216882 216884 216886 216888 216890 216892 216894 216896 216898 216899 216900
page
Art. no.
page
Art. no.
page
52 52 52 53 46 46 46 46 47 46 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47
216902 216904 216906 216908 216910 216912 216914 216916 216918 216920 216922 216924 216926 216928 216930 216932 216934 216936 216938 216940 216942 216944 216946 216950 216952 216954 216956 216958 216960 216962 216964 216966 216968 216970 217010 217020 217030 217040 217050 217052 217056 217058 217060 217062 217064 217066 217068 217070 217072 217074 217076 217078 217080 217082 217084 217086 217088 217090 217092 217094 217096 217098 217200 217500 217600 217602
47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 25 25 25 25 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 43 44 42 42
217604 217610 217612 217614 217616 217618 217620 217622 217630 217632 217634 217636 217638 217640 217642 217644 217646 217650 217652 217654 217660 217662 217664 217666 220006 220014 220016 220017 220022 220023 220024 220031 220032 220033 220034 220035 220038 220040 220052 220053 220054 220060 220061 220064 220066 220068 220070 220073 220076 220079 220095 220103 220105 220110 220112 220123 220126 220128 220129 220130 220131 220135 220136 220140 220141 220142
42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 214 168 168 168 214 220 214 220 168 164 220 223 220 223 214 219 216 214 217 214 214 220 214 220 168 167 217 216 217 216 216 140 142 195 195 168 214 162 164 163 221 168
Art. no. 220146 220147 220148 220150 220152/1 220153 220154 220156 220168 220168/VDE 220169 220170 220176 220177 220179 220192 220205/EN 220211 220212 220213 220221 220224 220229 220232 220235 220239 220244 220248 220252 220254 220275 220277 220278 220279 220280 220281 220282 220290 220303 220307 220309 220400 220402 220404 220410 220412 220414 220416 220418 220420 220422 220424 220426 220428 220430 220432 220434 220436 220438 220440 220450 220452 220454 220456 220458 220460
page 160 160 160 221 215 221 215 216 215 162 215 222 222 223 222 222 160 170 160 217 221 219 223 164 163 163 163 220 166 165 216 169 216 169 219 170 170 169 164 165 166 167 153 155 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 155 155 155 155 155 155
We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential.
Art. no. 220462 220464 220466 220468 220470 220478 220480 220482 220484 220486 220488 220490 220492 220494 220500 220506 220510 220550 220556 220560 220574 220575 230010 230020 230020/CO 230030 230030/CO 230032 230032/CO 230040 230040/CO 230050 230050/CO 230060 230060/CO 230064 230064/CO 230066 230066/CO 230070 230070/CO 230080 230080/CO 230084 230084/CO 230090 230090/CO 230100 230100/CO 230110 230110/CO 230120 230120/CO 230130 230130/CO 230136 230136/CO 230140 230140/CO 230160 230160/CO 230170 230170/CO 230180 230180/CO 230190
page 155 155 155 155 155 155 155 155 155 155 155 155 155 155 217 216 170 218 218 219 162 162 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226
Art. no. 230190/CO 230200 230200/CO 230204 230204/CO 230210 230210/CO 230220 230220/CO 230230 230230/CO 230240 230240/CO 230244 230244/CO 230250 230250/CO 230301/TIN 230312 230312/R 230312/TIN 230314 230314/R 230314/TIN 230330 230331 230332 230334 230336 230338 230340 230342 230344 230346 230352 230354 230356 230358 230360 230362 230364 230370 230372 230374 230376 230378 230380 230382 230395 230396 230397 230398 230400 230402 230404 230406 230408 230410 230412 230414 230430 230431 230432 230433 230434 230436
page 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 226 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 228 228 228 228 227 227 227 227 227 227 227 227 228 228 228 228 228 228
Art. no. 230438 230438/A 230438/B 230440 230442 230442/A 230444 230444/A 230448 230450 230450/A 230451 230453 230454 230456 230457 230458 230459 230460 230460/A 230461 230464 230466 230467 230473 230474 230475 230478/1 230479 230616 230618 230620 230622 230626 230628 230630 230634 230636 230661 230665 230667 230675 230676 230676/K 230677 230677/K 230678 230679 230680 230681 230681/K 230682 230683 230689 230691 230699 230701 230702 230704 230705 230706 230708 230709 230711 230714 230720
page 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 227 227 227 227 227 227 227 227 227 233 233 233 233 233 233 233 233 233 233 233 233 233 229 229 234 234 235 234 234 234 234 234 234 234 234 234 234
Art. no. 230721 230722 230723 230725 230732 230734 230736 230738 230740 230742 230746 230800 230802 230804 230806 230808 230810 230812 230814 230816 230818 230820 230822 230824 230826 230828 230830 230832 230834 230836 230838 230840 230842 230844 230846 230848 230850 230852 230854 230856 230858 230860 230862 230864 230866 230868 230870 230885/K 230886/K 230900 230902 230904 230906/1 230908 230910 230912 230914 230916 230918 230920 230922 230924 230926 230928 230930/1 230932
page 234 234 234 234 227 227 227 227 227 227 227 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 229 233 233 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228
Art. no. 230934 230936 230938 230940 230942 230944 230946 230948 230950 230952 230954/1 230956 230958 230960 230962/1 230964 230966 230968 230970 230972 230974 230976 230978 230979 230982 230984 230986 230988 231050 231052 231054 231056 231058 231060 231062 231064 231070 231072 231074 231076 231080 231082 231280 231282 231300 231301 231302 231304 231305 231306 231307 231312 231319 231320 231322 231323 231324 231326 231327 231330 231334 231336 231338 231340 231342 231350
page
Art. no.
page
228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 228 229 229 229 229 229 229 229 229 229 229 229 229 229 229 230 230 230 230 230 230 230 230 230 230 230 231 231 231 231 231 231 230 231 231 231 231 231 231
231352 231354 231502 231508 231516 231524 231526 231528 231530 231532 231534 231540 231544 231546 231700 231702 231704 231706 231708 231710 231712 231714 231716 231718 231750 231752 231754 231756 231758 231760 231766 231803 231900 231902 231904 231906 231908 231910 231912 231914 231916 231918 231920 231922 231924 231926 231928 231930 231931 231932 231934 231936 231938 231940 231942 231944 231946 231948 231950 231952 231954 231956 231958 231960 231962 231964
231 231 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234 234
251
Index
252
Art. no.
page
Art. no.
page
Art. no.
page
Art. no.
page
231966 231968 231970 231972 231973 231974 231976 231978 231980 231982 231998 231999 232007 240002 240005 240011 240012 240018 240020 240022 240024 240041 240042 240044 240046 240048 240057 240058 240059 240060 240071 240073 240132 240134 240136 240138 240152 240154 240156 240158 240160 240234 250040 250042 250044 250046 250048 250050 250052 250054 250056 250058 250060 250062 250064 250066 250068 250070 250072 250074 250076 250078 250080 250082 250084 250086
234 234 234 234 234 234 234 234 234 234 235 235 235 235 235 235 235 235 235 235 235 235 235 235 235 235 157 157 236 236 236 236 236 236 236 236 236 236 236 236 236 236 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120
250088 250090 250092 250094 250096 250098 250100 250102 250104 250106 250108 250110 250112 250114 250116 250118 260250 260252 260254 260256 260258 260260 260262 260264 260267 260268 260270 260272 260274 260276 260278 260282 260284 260286 260288 260290 260292 260300 260302 260304 260306 260308 260310 260312 260314 260316 260318 260320 260322 260324 260326 260328 260330 260331 260332 260333 260334 260335 260336 260337 260338 260350 260352 260354 260360 260362
120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 73 73 73 72 72 72 72 72
260364 260370 260371 260372 260373 260374 260376 260380 260382 260384 260386 260388 260390 260392 260394 260396 260400 260402 260404 260410 260411 260412 260414 260415 260416 260417 260418 260422 260424 260426 260427 260428 260430 260431 260440 260442 260443 260444 260446 260448 260449 260450 260500 260502 260504 260510 260512 260514 260516 260518 260520 260650 260651 260654 260656 260658 260660 260662 260664 260665 260666 260667 260670 260672 260674 260676
72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74
260678 260682 260684 260686 260688 260690 260692 260700 260702 260704 260706 260708 260710 260712 260714 260716 260718 260721 260722 260724 260726 260728 260730 260731 260732 260733 260734 260735 260750 260752 260754 260762 260764 260765 260770 260771 260772 260773 260774 260777 260858 260860 260862 260863 260902 260904 260906 260908 260910 260912 260914 260916 260918 260920 260922 260924 260926 260928 260930 260932 260934 260936 260938 260940 260942 260944
74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 75 75 75 78 78 78 75 75 75 75 75 78 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86
Art. no. 260946 260948 260950 260952 260954 260956 260960 260962 260964 260966 260968 260970 260972 260974 260976 260978 260980 260982 260984 262048 262060 262062 262064 262066 262068 262069 262073 262074 262075 262076 262085 262086 262087 262088 262089 262090 262091 262092 262093 262093/75 262094 262095 262096 262097 262100 262101 262102 262106 262108 262110 262114 262116 262120 262122 262124 262126 262128 262130 262132 262134 262136 262140 262142 262144 262151 262152
page
Art. no.
page
86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 78 122 122 122 122 122 122 121 121 121 121 121 121 121 121 121 121 121 121 121 121 121 121 121 121 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 115 115
262154 262158 262159 262160 262161 262162 262163 262164 262165 262170 262172 262200 262202 262204 262206 262208 262209 262210 262212 262214 262215 262216 262218 262220 262222 262223 262224 262226 262227 262228 262230 262232 262234 262236 262238 262240 262242 262243 262244 262245 262246 262247 262248 262249 262254 262256 262258 262260 262262 262264 262266 262268 262270 262272 262274 262276 262278 262280 262282 262284 262286 262288 262290 262292 262294 262296
115 115 116 114 114 114 114 114 114 114 114 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118
We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential.
Art. no.
page
262298 262300 262302 262304 262306 262308 262310 262500 262501 262502 262503 262504 262505 262506 262507 262508 262509 262510 262511 262512 262513 262516 262517 262518 262520 262522 262528 262530 262532 262536 262538 262540 262542 262546 262600 262602 262604 262606 262608 262610 262616 262618 262620 262622 262628 262630 262632 262636 262638 262640 262642 262646 262700 262702 262704 262710 262750 262752 262754 262756 262758 262760 262762 262764 262766 262768
118 118 118 118 118 118 118 112 113 112 113 112 113 112 113 112 113 112 113 112 113 112 113 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 113 113 113 113 114 114 114 114 114 114 114 114 114 114
Art. no. 262782 262820 262822 262824 262826 262828 262830 262832 262834 262840 262842 262844 262846 262848 262850 262940/125 262940/152 262940/200 262940/250 262940/300 262940/360 262940/520 262942/125 262942/152 262942/200 262942/250 262942/300 262942/360 262942/520 262950 262950/1050 262950/152 262950/200 262950/300 262950/360 262950/520 262950/680 262950/840 262952 262952/1050 262952/152 262952/200 262952/300 262952/360 262952/520 262952/680 262952/840 262954 262956 262958 262960 262960/1000 262960/1200 262960/290 262960/360 262960/520 262960/680 262960/840 262962 262962/1000 262962/1200 262962/290 262962/360 262962/520 262962/680 262962/840
page 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 116 116 116 116 116 116 116 116 116 116 116 116 116 116 113 116 116 116 116 116 116 116 116 113 116 116 116 116 116 116 116 116 113 113 113 113 116 116 116 116 116 116 116 113 116 116 116 116 116 116 116
Art. no. 262964 262966 262968 262970 262970/1100 262970/1315 262972 262974 262976 262978 262980 263360 263362 263364 263380 263382 263384 263386 263388 263392 263393 263394 263396 263400 263402 263404 263410 263412 263413 263414 263415 263416 263417 263418 263422 263424 263426 263440 263442 263443 263444 263446 263448 263449 263450 263451 263452 263453 263456 263510 263512 263514 263516 263518 263520 263800 263802 263804 263806 263808 263810 263812 263814 263816 263818 263820
page 113 113 113 113 116 116 113 113 113 113 113 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 124 124 124 124 124 124 124 124 124 124 124
Art. no. 263822 263824 263826 263828 263830 263832 263834 263836 263838 263840 263842 263844 263846 263848 263850 263852 263854 263856 263858 263860 263862 263864 263866 263868 263870 263872 263874 263876 263878 263880 270014 270015 270016 270021 270022 270027 270028 270029 270030 270031 270032 270033 270034 270036 270038 270039 270040 270041 270042 270044 270046 270048 270049 270050 270066 270066/500 270068 270068/500 270070 270070/500 270072 270072/500 270074 270074/500 270076 270078
page 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 66 63 66 63 63 63 63 63 63 61 61 61 61 61 61 61 61 61 61 61 61
Art. no. 270078/500 270079 270079/500 270080 270082 270082/500 270084 270084/500 270086 270086/500 270087 270088 270089 270089/500 270090 270090/500 270091 270091/500 270092 270092/500 270093 270093/500 270094 270096 270097 270098 270100 270102 270104 270106 270107 270108 270110 270112 270114 270116 270118 270119 270120 270121 270122 270123 270124 270126 270128 270130 270131 270132 270134 270135 270136 270137 270140 270140/500 270141 270142 270142/500 270143 270143/500 270144 270146 270146/500 270148 270148/500 270149 270149/500
page 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 60 60 60 60 60 60 60 60 60 60 60 60 60 60
Art. no. 270150 270150/500 270152 270152/500 270154 270154/500 270156 270156/500 270158 270158/500 270159 270159/500 270160 270160/500 270164 270164/500 270166 270166/500 270168 270168/500 270170 270172 270174 270176 270178 270180 270182 270184 270186 270188 270190 270192 270194 270195 270196 270198 270217 270218 270714 270715 270716 270719 270720 270721 270722 270723 270724 270725 270726 270727 270728 270732 270738 270740 270742 270744 270746 270748 270750 270754 270756 270758 270760 270762 270778 270780
page 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 65 65 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 64 64
253
Index Art. no. 270782 270784 270787 270788 270790 270792 270794 270795 270796 270797 270798 270799 270800 270801 270802 270803 270804 270805 270806 270807 270808 270810 270811 270812 270813 270814 270815 270816 270818 270820 270822 270824 270826 270828 270830 270832 270834 270836 270838 270840 270842 270844 270850 270852 270854 270856 270858 270864 270866 270870 270882 270882/DIN 270888 270890 270891 270892 270893 270894 270895 270896 270897 270899 270900 270902 270904 270906
254
page
Art. no.
page
64 64 64 64 64 64 64 65 64 64 64 64 63 63 62 62 63 63 62 62 63 63 63 62 63 63 63 63 62 62 62 62 62 62 62 62 62 62 62 62 62 62 65 65 65 65 65 66 66 65 67 67 66 66 67 67 67 67 67 67 67 67 64 64 64 64
270908 270910 270912 270914 272250 272254 272260 272264 272268 272280 272284 272290 272294 272298 273350 273352 273354 273356 273358 273360 273362 273364 273366 273368 273392 273394 273396 280000 280004 280008 280012 280016 280020 280030 280034 280038 280042 280046 280050 280060 280064 280070 280074 280080 280084 280090 280094 280100 280101 280104 280105 280110 280111 280114 280115 280120 280124 280128 280132 280136 280140 280150 280154 280158 280162 280166
64 64 64 64 62 62 62 62 62 62 62 62 62 62 64 64 64 64 64 64 64 64 64 64 64 64 64 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81
Art. no. 280170 280180 280182 280184 280186 280188 280190 280192 280194 280196 280198 280200 280202 280204 280206 280208 280210 280212 280214 280460 280482 280490 280512 280520 280542 280550 280572 280580 280582 290001 290003 290004 290005 290006 290006/90 290007 290008 290008/90 290009 290010 290010/90 290011 290012 290013 290014 290014/90 290015 290016 290016/90 290017 290018 290018/90 290019 290020 290020/90 290021 290022 290022/90 290023 290024 290024/90 290025 290026 290027 290028 290028/90
page 81 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 95 95 90 95 90 91 95 90 91 90 90 91 95 90 95 90 91 95 90 91 90 90 91 95 90 91 95 90 91 90 90 91 95 90 95 90 91
Art. no. 290029 290030 290030/90 290031 290033 290034 290035 290036 290037 290038 290039 290040 290041 290042 290043 290044 290045 290046 290047 290048 290049 290050 290051 290052 290053 290054 290055 290056 290057 290058 290059 290060 290061 290063 290064 290065 290066 290067 290068 290069 290070 290071 290072 290073 290074 290075 290076 290077 290078 290079 290080 290081 290082 290083 290084 290250 290252 290254 290256 290258 290260 290262 290264 290266 290268 290270
page
Art. no.
page
Art. no.
page
90 90 91 95 95 90 95 90 95 90 95 90 90 95 90 95 90 90 90 90 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 94 94 94 94 94 94 94 94 94 94 94
290272 290276 290278 290280 290282 290284 290286 290288 290290 290292 290294 290296 290300 290302 290304 290306 290308 290310 290316 290318 290320 290322 290324 290326 290328 290330 290332 290334 290336 290338 290350 290352 290354 290356 290358 290360 290362 290364 290366 290368 290370 290372 290374 290380 290381 290382 290385 290386 290387 290404 290406 290408 290410 290412 290414 290416 290418 290420 290422 290424 290426 290428 290430 290432 290434 290436
94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 108 108 108 109 108 109 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97
290438 290440 290442 290444 290446 290448 290450 290452 290454 290456 290458 290460 290462 290464 290466 290468 290470 290472 290474 290476 290478 290480 290482 290484 290486 290488 290490 290492 290494 290496 290498 290516 290518 290520 290522 290550 290552 290554 290556 290558 290560 290617 290619 290620 290621 290622 290623 290624 290625 290626 290627 290628 290630 290632 290634 290635 290646 290648 290650 290652 290654 290656 290658 290660 290662 290663
97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 98 98 98 98 98 98 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
We reserve the right to amendment products and/or prices at any time. Our general terms and conditions are essential.
Art. no.
page
290664 290666 290668 290670 290672 290676 290678 290680 290682 290684 290686 290688 290690 290692 290694 290696 290698 290700 290701 290702 290704 290707 290708 290710 290712 290713 290714 290716 290717 290718 290719 290720 290721 290730 290731 290732 290734 290735 290736 290738 290739 290740 290742 290744 290746 290748 290750 290751 290752 290754 290756 290770 290771 290773 290775 290776 290777 290778 290780 290782 290784 290786 290788 290800 290801 290802
85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 93 93 93
Art. no. 290804 290806 290810 290812 290814 290816 290818 290820 290822 290824 290826 290830 290832 290834 290836 290840 290842 290844 290846 290848 290850 290852 290854 290856 290858 290860 290862 290864 290866 290868 290870 290872 290874 290876 290878 290880 290882 290884 290886 290900 290902 290904 290906 290908 290910 290912 290914 290916 290918 290920 290922 290924 290926 290928 290930 290932 290932/90 290934 290934/90 290936 290936/90 290938 290938/90 290940 290940/90 290942
page 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 90 89 90 89 90 89 90 89 90 89
Art. no. 290942/90 290944 290944/90 290946 290948 290948/90 290950 290950/90 290952 290952/90 290954 290954/90 290956 290956/90 290958 290958/90 290960 290960/90 290962 290962/90 290964 290964/90 290966 290966/90 290968 290968/90 290970 290970/90 290972 290972/90 290974 290976 290976/90 290978 290978/90 290980 290980/90 290982 290982/90 290984 290985 290986 290986/90 290988 290988/90 290990 290990/90 290991 290992 290992/90 290994 290994/90 290996 290996/90 290998 290998/90 290999 291000 291000/90 291002 291002/90 291004/90 291050 291052 291054 291056
page
Art. no.
page
Art. no.
page
Art. no.
page
90 89 90 89 89 90 89 90 89 90 89 90 89 90 89 90 89 90 89 90 89 90 89 91 89 91 89 91 89 91 89 89 91 89 91 89 91 89 91 89 89 89 91 89 91 89 91 89 89 91 89 91 89 91 89 91 89 89 91 89 91 91 91 91 91 91
291058 291060 291062 291064 291066 291068 291070 291072 291074 291076 291078 291080 291082 291084 291090 291092 291096 291098 291100 291102 291104 291106 291108 291110 291112 291114 291119 291120 291124 291126 291128 291130 291132 291134 291136 291138 291140 291142 291330 291332 291334 291336 291338 291340 291342 291344 291348 291350 291352 291354 291356 291358 291360 291370 291372 291374 291376 291378 291380 291382 291384 291386 291388 291390 291392 291394
91 91 91 91 91 91 91 91 91 91 91 91 91 91 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92
291396 291398 291440 291442 291444 291446 291448 291450 291452 291454 291456 291458 291460 291462 291464 291520 291521 291522 291523 291524 291525 291526 291527 291528 291529 291530 291531 291532 291533 291534 291535 291536 291537 291538 291539 291540 291541 291542 291543 291544 291545 291546 291547 291548 291549 291550 291551 291552 291553 291554 291555 291700 291702 291704 291706 291708 291710 291712 291714 291716 291718 291720 291722 291724 291726 291728
92 92 96 96 96 96 96 96 96 96 96 96 96 96 96 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 96 99 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98
291730 291732 291734 291736 291738 291740 291742 291744 291746 291748 291750 291752 291754 291756 291758 291760 291762 291764 291766 291768 291770 291772 291774 291776 291778 291780 291782 292560 292562 292564 292566 292568 292570 292572 292574 292580 292582 292584 292586 292588 292590 292592 292596 292598 292600 292770 292772 292774 292776 292778 292780 292782 292784 292786 292788 292790 292792 292794 292796 292798 292800 292802 292804 292806 292808 292810
98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101
255
Index
256
Art. no.
page
Art. no.
page
292812 292814 292816 292818 292820 292822 292824 292904 292906 292908 292910 292912 292914 292916 292918 292920 292922 292924 292926 292928 292930 292932 292934 292936 292938 292940 292942 292944 292946 292948 292950 293002 293004 293006 293008 293010 293012 293014 293016 293018 293020 293022 293024 293026 293028 293030 293032 293034 293036 293038 293040 293042 293044 293046 293048 293050 293052 293054 293056 293058 293060 293062 293064 293066 293068 293070
101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106
293072 293074 293076 293078 293080 293082 293084 293086 293088 293090 293092 293094 293096 293098 293100 293102 293104 293106 293108 293110 293112 293114 293116 293118 293130 293132 293134 293136 293138 293140 293142 293144 293146 293148 293150 293152 293154 293156 293300 293302 293304 293306 293308 293310 293312 293314 293316 293318 293320 293322 293324 293326 293328 293330 293332 293334 293336 293542 293544 293546 293548 293550 293552 293554 293556 293558
106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 107 107 107 107 107 107 107 107 107 107 107 107 107 107 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 102 102 102 102 102 102 102 102 102
Art. no. 293578 293582 293584 293598 293600 293606 293608 293610 293622 293624 293626 293634 293636 293638 293652 293654 293656 293664 293666 293678 293680 293688 293690 293810 293812 293814 293816 293960 293962 293964 293966 293968 293970 293972 293974 293976 293978 294240 300033 300228 300229 300294/EN 300295/EN 300296/EN 300297/EN 300298/EN 300299/EN 300302/EN 300303/EN 300305/EN 300306/EN 300310/EN 300312/EN 300322 363500 363502 363504 363510 363512 363514 363520 363522 363524 363530 363532 363534
page 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 104 103 103 103 103 103 103 103 103 103 103 109 32 174 174 156 156 154 156 154 154 154 156 154 156 154 156 18 77 77 77 77 77 77 77 77 77 77 77 77
Art. no. 363536 363538 363540 363542 363544 363546 363548 363550 363552 363554 363556 363558 363600 363602 363604 212372 790005 790006 790008 790015 790016 790017 790018 790027 790029 790030 790031 790040 790041 790043 790051 790053 790054 790055 790056 790063 790064 790065 790079 790091 790093 790100 790101 790102 790103 790104 790111 790112 790113 790118 790120 790121 790210 790211 790212 790212/V 790222 790223 790223/V 790224 790224/V 790225 790235 790235/V 790236 790237
page
Art. no.
page
Art. no.
page
77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 54 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238
790303 790311 790325 790326 790327 790329 790332 790333 790334 790335 790411 790413 790416 790417 790419 790422 790423 790424 790426 790428 790432 790433 790434 790436 790450 790452 790454 790456 790470 790500 790502 790504 790510 790512 790514 790516 790540 790542 790544 790562 790564 790566 790588 790592 790616 790618 790700 790702 790704 790706 790710 790712 790714 790716 790721 790722 790724 790726 790806 790808 790832 790834 790837 790862 790864 790867
239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239 239
790882 790884 790888 790900 790902 790920 790922 792000 792001 792002 792003 792005 792006 792008 792600 792602 792603 792604 792606 792607 792650 792651 792652 792654 792656 792658 792756 792758 792760 792762 792802 792804 792806 792810 792816 792818 793005 793006 793007 793008 793027 793029 793030 793031 793040 793041 793043 793051 793053 793054 793055 793064 793065 793099 793100 793101 793102 793103 793104 793111 793112 793113 793118 793120 793121 793125
239 239 239 238 238 238 238 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 240 241 241 241 241 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238
257
HAUPA transparent HAUPA-Group Germany (HAUPA Main Office) HAUPA GmbH & Co. KG Königstraße 165-169 D-42853 Remscheid Phone: +49 (0) 2191 8418 - 0 Fax: +49 (0) 2191 8418 840 E-Mail:
[email protected],
[email protected] Internet: www.haupa.com Austria HAUPA Werkzeuge Hans-Udo Paas, Bayernstraße 39 A-5071 Wals-Siezenheim Phone: +43 (0662) 854717 Fax: +43 (0662) 854632 E-Mail:
[email protected] Spain HAUPA Ibérica S. L. C/. Joanot Martorell, 36 E-08850 Gava/Barcelona Phone: +34 (902) 313135 Fax: +34 (902) 414145 E-Mail:
[email protected] Poland HAUPA Polska Sp.z.o.o ul. Norwida 11 55100 Trzebnica Phone: +48 (0)71 3874813 Fax: +48 (0)71 3874814 E-Mail:
[email protected] Baltic States UAB HAUPA Baltics P. Smugleviciaus g. 8-30, 08311 Vilnius Phone/GSM: +370 699 633 63 Fax: +370 527 841 64 E-Mail:
[email protected]
Reinhold Wolfsgruber M. Schurrer & Co GmbH, Bayernstraße 39, A-5071 Wals-Siezenheim Phone: 0664/4314431 E-Mail:
[email protected] Salzburg
Holger Kratzer (Key-Account-Manager) HAUPA GmbH & Co. KG Königstraße 165 -169, D-42853 Remscheid Mobil: +49 (0) 171 339 65 85 Fax: +49 (0) 2191 8418 815 E-Mail:
[email protected] Nordbayern/Saarland/Rheinland-Pfalz/ Süd-Hessen/Baden-Württemberg
Andrä Eberharter Pipelife Austria GmbH & Co KG, Bert-Köllensperger-Straße 8a, 6065 Thaur/Gewerbegebiet Phone: 0664/1226524 E-Mail:
[email protected] Vorarlberg, Tirol
Rainer Eiselt Industrievertretungen Südstraße 4, 09221 Neukirchen Phone: +49 (0) 371 271050 Fax: +49 (0) 371 2710518 E-Mail:
[email protected] Sachsen/Sachsen-Anhalt/Thüringen Kittler Elektro-Vertriebs GmbH Industrievertretung Attilastr. 73, 12247 Berlin Phone: +49 (0) 30 77430 - 73 Fax: +49 (0) 30 77430 - 82 E-Mail:
[email protected] Berlin/Brandenburg Hans Fr. R. Petersen KG Vertretungen der Elektroindustrie Nikolaus-Otto-Straße 17, 22946 Trittau Phone: +49 (0) 4154 841821 Fax: +49 (0) 4154 841833 E-Mail:
[email protected] Hamburg/Schwleswig-Holstein/ Mecklenburg-Vorpommern Ulrich Tiemann Industrievertretungen e. K. Querstraße 9, 33729 Bielefeld Phone: +49 (0) 521 285081 Fax: +49 (0) 521 285083 E-Mail:
[email protected] NRW-Ost/Niedersachsen/Hannover
Romania SC HAUPA SRL Str. G. Enescu, Nr. 3 331030 Hunedoara GSM: +4 0744 561 567 Fax: +4 0354 407 994 E-Mail:
[email protected]
Sönnecken GmbH Industrie-Vertretungen Wildermannstr. 8, 44141 Dortmund Phone: +49 (0) 231 5600012 Fax: +49 (0) 231 590607 E-Mail:
[email protected] NRW Ruhrgebiet
Russia HAUPA-RU Ltd Street Sovetskaya 60-A, 180000 Pskov Phone: +7 811 2 73 30 36 Phone/Fax: +7 811 2 73 30 39 Mob.ph.: +7 911 368 57 03 E-Mail:
[email protected] E-Mail:
[email protected]
Commercial sales staff, Austria
Hans-Joachim Gummersbach (HAUPA Main Office) HAUPA GmbH & Co. KG Königstraße 165-169, D-42853 Remscheid Phone: +49 (0) 2191 8418 - 0 Fax: +49 (0) 2191 8418 840 E-Mail:
[email protected]
Balkan States HAUPA S.E.E. d.o.o. Miroslava Krleze 24, 71000 Sarajevo Phone/Fax: +387(0)33545725 GSM: +38763891678 E-Mail:
[email protected]
Ukraine HAUPA Ukraine str. Borisa Gmury 1/2, ap. 216, 02140, Kiev GSM: +38 067 23-107-23 (+38 044 223-05-77) Fax: +38 044 572-95-42, E-Mail:
[email protected]
258
Commercial sales staff, Germany
Hipp-Industrievertretungs-GmbH Zum Engelberg 4, 79249 Merzhausen Tel.: +49 (0) 761 402425 Fax: +49 (0) 761 408351 Mobil: +49 (0) 172 7648217 E-Mail:
[email protected] Baden-Württemberg Wolfgang Humig Handelsvertretung Rossinistr. 37 b, 85057 Ingolstadt Tel.: +49 (0) 841 / 99 32 764 Fax: +49 (0) 841 / 99 32 765 E-Mail:
[email protected] Südbayern
Gerhard Wutsch M. Schurrer & Co GmbH, Bayernstraße 39, A-5071 Wals-Siezenheim Phone: 0664/1226528 E-Mail:
[email protected] Steiermark, Kärnten Klaus Gutenbrunner M. Schurrer & Co GmbH, Bayernstraße 39, A-5071 Wals-Siezenheim Phone: 0664/4449549 E-Mail:
[email protected] Oberösterreich Thomas M. Steiger M. Schurrer & Co GmbH, Bayernstraße 39, A-5071 Wals-Siezenheim Phone: 0664/2607878 E-Mail:
[email protected] Wien, NÖ, Burgenland
Commercial sales staff, Spain Victor Arondo Serradilla C/. Joanot Martorell, 36 E-08850 Gava/Barcelona Phone: +34 (902) 313135, Fax: +34 (902) 414145 E-Mail:
[email protected]
Commercial sales staff, Poland Andrzej Ryznar 55 -100 Trzebnica, ul. Norwida 11 Phone: +48 71 387 48 13 Fax: +48 71 387 48 14 E-Mail:
[email protected] Marek Dąbek 55 -100 Trzebnica, ul. Norwida 11 Phone: +48 71 387 48 13 Fax: +48 71 387 48 14 Phone: com. +48 693 - 431- 542 E-Mail:
[email protected] Jakub Bałaziński 55 -100 Trzebnica, ul. Norwida 11 Phone: +48 71 387 48 13 Fax: +48 71 387 48 14 Phone: com. +48 603 -719 -731 E-Mail:
[email protected] Andrzej Bednarczyk 55 -100 Trzebnica, ul. Norwida 11 Phone: +48 71 387 48 13 Fax: +48 71 387 48 14 Phone: com. +48 601–181–181 E-Mail:
[email protected]
HAUPA transparent
Foreign representatives Argentina Hoyos y Cia S. R. L. Calle 62 (Cuba) No. 1561 (CP 1651) 1651 San Andres Phone: +54 114 754 165, Fax: +54 114 753 810 E-Mail:
[email protected] Belgium S.A. HUPPERTZ N.V. Rue Golden Hope Straat 35 B, B-1620 Drogenbos Phone: 02/334 34 34, Fax: 02/334 34 40 E-Mail:
[email protected] Bosnia HAUPA S.E.E. d.o.o. Miroslava Krleze 24, 71000 Sarajevo Phone:/Fax: +387(0)33545725, GSM: +38763891678 E-Mail:
[email protected] Bulgaria Retra-Georgiev 21 Vek 8/2, 1700 Sofia Tel./Fax: +359 2 8687207 GSM +359888331018 Estonia UAB HAUPA Baltics P. Smugleviciaus g. 8-30, 08311 Vilnius Phone:/GSM: +370 699 633 63, Fax: +370 527 841 64 E-Mail:
[email protected] Finland Spring Electronics Kaivosvoudintie 1A, 01610 VANTAA Puh/Phone: +358 (0) 9 56 36 300 Fax: +358 (0) 9 56 36 301 E-Mail:
[email protected] Greece HAUPA Main Office Germany, Jörg Adam Phone: +49 2191 8418-0, Fax: +49 2191 8418-840 E-Mail:
[email protected] www.haupa.com Great Britain HAUPA Main Office Germany Phone: +49 2191 8418-0, Fax: +49 2191 8418-840 E-Mail:
[email protected] www.haupa.com Ireland MCC Controls Industrial Electrical Supplies Robinhood Business Park Robinhood Road, Dublin 22 Phone: +353 14506450, Fax: +353 14506104 E-mail:
[email protected] Iceland Smith & Norland Nóatúni 4, IS-105 Reykjavik Phone: 00354 520 3000, Fax: 00354 520 3011 E-Mail:
[email protected] Italy Canalplast Via L.Tolstoi, 65 – 20051 Limbiate (Milano) Italy Phone: +39 02 9906421, Fax: +39 02 99055 E-Mail:
[email protected] Croatia HAUPA S.E.E. d.o.o. Miroslava Krleze 24, 71000 Sarajevo Phone:/Fax: +387(0)33545725, GSM: +38763891678 E-Mail:
[email protected]
Latvia UAB HAUPA Baltics P. Smugleviciaus g. 8-30, 08311 Vilnius Phone:/GSM: +370 699 633 63, Fax: +370 527 841 64 E-Mail:
[email protected]
Swiss AXTRON GmbH Hungerbüelstr. 22, CH-8500 Frauenfeld Phone: 0041 / 527 21 58 58, Fax: 0041 / 527 21 58 59 E-Mail:
[email protected]
Lithuania UAB HAUPA Baltics P. Smugleviciaus g. 8-30, 08311 Vilnius Phone:/GSM: +370 699 633 63, Fax: +370 527 841 64 E-Mail:
[email protected]
Serbia HAUPA S.E.E. d.o.o. Miroslava Krleze 24, 71000 Sarajevo Phone:/Fax: +387(0)33545725, GSM: +38763891678 E-Mail:
[email protected]
Luxembourg MINUSINES S.A. 8, rue Hogenberg, L-1022 Luxembourg-Gasperich Phone: +352 495 858, Fax: +352 495 866 E-Mail:
[email protected]
Slowakia HAUPA Main Office Germany, Marc Wolter Phone: +49 2191 8418-0, Fax: +49 2191 8418-840 E-Mail:
[email protected] www.haupa.com -
Macedonia HAUPA S.E.E. d.o.o. (Goran Hrgovic) Miroslava Krleze 24, 71000 Sarajevo Phone:/Fax: +387(0)33545725, GSM: +38763891678 E-Mail:
[email protected]
Slowenia HAUPA S.E.E. d.o.o. Miroslava Krleze 24, 71000 Sarajevo Phone:/Fax: +387(0)33545725, GSM: +38763891678 E-Mail:
[email protected]
Malta HAUPA Main Office Germany, Kerstin Uebbert Phone: +49 2191 8418-0, Fax: +49 2191 8418-880 E-Mail:
[email protected] www.haupa.com
Spain HAUPA Ibérica S. L. C/. Joanot Martorell, 36, E-08850 Gava/Barcelona Phone: (902) 313135, Fax: (902) 414145 E-Mail:
[email protected]
Netherlands HAUPA Main Office Germany, Kerstin Uebbert Phone: +49 2191 8418-0, Fax: +49 2191 8418-880 E-Mail:
[email protected] www.haupa.com
South Africa Surge Technology (Pty) Ltd. 6 Fabriek Street, Strydom Park, Randburg 2125 Phone: (011) 792-1303/5, Fax: (011) 793-692 E-Mail:
[email protected]
Norway VIX AS Postboks 123, 1650 Sellebakk Tel.: ++47 69 36 00 50, Fax: ++47 69 34 76 70 E-mail:
[email protected]
Czech Republic ELIMA Hradecká 506, 506 01 Jičín Phone: +420 493 524 390, Fax: +420 493 525 720 E-Mail:
[email protected]
Austria HAUPA Werkzeuge Hans-Udo Paas Bayernstraße 39, A-5071 Wals-Siezenheim Phone: +0662 854717, Fax: +0662 854632 E-mail:
[email protected]
Turkey Doganer Makine Ltd. Sti. Ikitelli OSB Demirciler Sit. D-1 Blok No: 275 Kucukcekmece - Istanbul - Turkiye Phone: +90 212 5496862, Fax: +90 212 5498920, E-Mail:
[email protected]
Poland HAUPA Polska Sp.z.o.o ul. Norwida 11, 55100 Trzebnica Phone: +48 (0)71 3874813, Fax: +48 (0)71 3874814 E-Mail:
[email protected] Portugal HAUPA Main Office Germany, Marc Wolter Phone: +49 2191 8418-0, Fax: +49 2191 8418-840 E-Mail:
[email protected] www.haupa.com Romania SC HAUPA SRL 331059 Hunedoara, Bulevard 1848, Nr. 13, Ap. 6 GSM: +4 0744 561 567, Fax: +4 0354 407 994 E-mail:
[email protected] Russia HAUPA-RU Ltd Street Sovetskaya 60-A, 180000 Pskov Phone: +7 811 2 73 30 36 Fax: +7 811 2 73 30 39 E-Mail:
[email protected] E-Mail:
[email protected]
Hungary POLY-NORM 2000 Kft. Bethlen Gábor u. 21 - 23, H-1077 Budapest Phone: +361/461-0170, Fax +361/321-1618 E-Mail:
[email protected] Ukraine HAUPA Ukraine str. Borisa Gmury 1/2, ap. 216, 02140, Kiev GSM: +38 067 23-107-23 (+38 044 223-05-77) Fax +38 044 572-95-42, E-Mail:
[email protected] Cyprus Theodoros Georgiou Ltd. 1, Ayios Neophytos Str., CY 6300 Larnaca Phone: +357 24 653545, Fax: +357 24 625103 E-Mail:
[email protected] Central America INTEK Guatemala, El Salvador, Honduras, Nicaraqua, Costa Rica www.intek-ca.com
Sweden VIX AS Postboks 123, 1650 Sellebakk Tel.: ++47 69 36 00 50, Fax: ++47 69 34 76 70 E-mail:
[email protected]
... convincing solutions Germany: HAUPA, Koenigstr. 165 – 169, D - 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840,
[email protected]
259
Point of sales
HAUPA Shop in Shop Sales System A well-stocked display of tools at the point of sale is the hallmark of every good electrical wholesaler and offers customers the full service they need. Within this complete customer-focussed presentation concept, your clients will find a wide range of HAUPA quality tools and the materials to go with them. It includes tools from the „Around the cable“, „Working under tension“ and „Standard program“ ranges and offers the user a very high degree of flexibility.
1
2
HAUPA Sales promotion On request, HAUPA also naturally supplies individual cabinets and wall displays fitted out with your own choice of tools. Our different resentation models offer possibilities for your sales area which are both interesting and variable.
260
3
Cupboards with lockable glass door. Perforated panel displays also available in 1.00m and 1.25 m width. Dimensions: 2,20 m x 1,25 m x 40 cm. (The entire list of items available for display on the panels can be viewed on the internet or by mailing
[email protected]).
QR code: This catalogue contains QR codes which ensure more transparent communication of additional information via video or similar media content.
HAUPA demo
Germany HAUPA GmbH & Co. KG Königstraße 165-169 42853 Remscheid Phone: +49 (0 )2191 8418 - 0 Fax: +49 (0 )2191 8418 840 E-Mail: sales @ haupa.com www.haupa.com
HAUPA-Group www.haupa.com
Q
DIN EN ISO 9001
ZERTIFIKAT
... convincing solutions
