Transcript
MAINTENANCE Disconnect air line from tool, engage trigger lock and remove fasteners from magazine before making adjustments or personal injury may result.
Daily Maintenance Chart Action Lubricate tool with 5-7 drops of PORTER-CABLE Pneumatic Tool Oil Drain compressor tanks and hoses daily
Why Prevents failure of o-rings
How Insert drops into air fitting on end cap of tool
Prevents accumulation of moisture in compressor and nailer
Open petcocks or other drain valves on compressor tanks. Allow any accumulated water to drain from hoses Blow clean with compressor air. The use of oils, lubricants periodically or solvents is not recommended as they tend to attract debris. Tighten loose screws or other fasteners using the appropriate hex wrench or screwdriver.
Clean magazine, magazine Permits smooth release and contact operation of magazine, trip mechanism. reduces wear and prevents jams. Before each use, check to insure all screws, nuts and fasteners are tight and undamaged.
Prevents jams, leaks and premature failure of tool parts.
CLEANING Never use solvents or other harsh chemicals for cleaning the nonmetallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
REPAIRS For assistance with your tool, visit our website at www.portercable.com for a list of service centers, or call the PORTER-CABLE Customer Care Center at 1-888-848-5175 (U.S. & Canada Only).
SERVICE REPLACEMENT PARTS Use only identical replacement parts. For a parts list or to order parts, visit our service website at http://servicenet.deltaportercable.com/. You can also order parts from your nearest PORTER-CABLE Factory Service Center or PORTER-CABLE Authorized Warranty Service Center. Or, you can call our Customer Care Center at 1-888-848-5175 (U.S. & Canada Only).
SERVICE AND REPAIRS All quality tools will eventually require servicing and/or replacement of parts. For information about PORTER-CABLE, its factory service centers or authorized warranty service centers, visit our website at www.portercable.com or call our Customer Care Center at 1-888-848-5175 (U.S. & Canada Only). All repairs made by our service centers 13 - ENG
are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by others. You can also write to us for information at PORTER-CABLE, 4825 Highway 45 North, Jackson, Tennessee 38305 - Attention: Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number, etc.).
ACCESSORIES Since accessories, other than those offered by PORTER-CABLE, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only PORTER-CABLE recommended accessories should be used with this product. A complete line of accessories is available from your PORTER-CABLE Factory Service Center or a PORTER-CABLE Authorized Warranty Service Center. Please visit our Web Site www.portercable.com for a catalog or for the name of your nearest supplier.
Three Year Limited Warranty PORTER-CABLE will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.portercable.com or call 1-888-848-5175 (U.S. & Canada Only). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces. In addition to the warranty, PORTER-CABLE tools are covered by our: 1 YEAR FREE SERVICE: PORTER-CABLE will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase. 90 DAY MONEY BACK GUARANTEE: If you are not completely satisfied with the performance of your PORTER-CABLE Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions asked. LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country specific warranty information contained in the packaging, call the local company or see website for warranty information. To register your tool for warranty service visit our website at www.portercable.com. WARNING LABEL REPLACEMENT If your warning labels become illegible or are missing, call 1-888-848-5175 (U.S. & Canada Only) for a free replacement.
14 - ENG
