Transcript
Manrose PRO-SERIES wall/ceiling mounted fans xflp low profile models Square Models Duct Size
Model No.
Switching Method
Performance 3
Order Code
125mm
XFLP125SS
Standard
36 l/s, 130m /hr
FAN0589
125mm
XFLP125ST
Timer
36 l/s, 130m3/hr
FAN0590
150mm
XFLP150SS
150mm
XFLP150ST
Standard
3
FAN0594
3
FAN0595
87 l/s, 313m /hr
Timer
87 l/s, 313m /hr
Circular Models Duct Size
Model No.
Switching Method
Performance
Order Code
125mm
XFLP125CS
Standard
36 l/s, 130m3/hr
FAN0604
125mm
XFLP150CS
150mm 150mm
Standard
FAN0609
3
FAN0610
87 l/s, 313m /hr 87 l/s, 313m /hr
Timer
XFLP150CT
FAN0605
3
36 l/s, 130m /hr
Timer
XFLP125CT
3
Safety extra low voltage (selv) models Duct Size
Model No.
125mm
XFLP125SLV
125mm 150mm
Performance
Order Code
SELV 12V
36 l/s, 130m3/hr
FAN0591
XFLP125CLV
SELV 12V
36 l/s, 130m3/hr
FAN0606
XFLP150SLV
SELV 12V
87 l/s, 313m3/hr
FAN0596
XFLP150CLV
150mm
Switching Method
SELV 12V
3
87 l/s, 313m /hr
FAN0611
Please Note: An isolating transformer is required for all low voltage fans. Low Voltage models do not include a transformer. (We recommend a SELV isolating transformer Order Code: FAN2402).
Duct Size
Description: Square
Order Code
125mm
Satin Silver Fascia
FAN2069
125mm
Satin Silver Fascia
FAN2068
125mm
Chrome Fascia
FAN0757
125mm
Chrome Fascia
FAN0755
150mm
Satin Silver Fascia
FAN2070
150mm
Satin Silver Fascia
FAN2071
150mm
Chrome Fascia
FAN0613
150mm
Chrome Fascia
FAN0598
• Unique low profile design enables these fans to be installed unobtrusively into any wall or ceiling. • These axial fans have been upgraded with ball bearing motors to prolong the life of the motor. • Supported by a 5 year warranty.
EA
Order Code
LB
Description: Circular
BAL
Duct Size
R
ACCESSORIES
Switching Options 1. Standard Model - operates from remote switch (not supplied).
3. SELV Model - Suitable for installation in damp areas, zones 1, 2 and 3.
2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off - adjust able 1-20 minutes. Requires three wires: permanent phase, switched phase, neutral.
NOTE: All fan flow rates quoted are free air delivery.
12
GM
OT O R
5
IN
YEAR WARRANTY
TECHNICAL DATA General information Models
Circular Cut-Out Size
XFLP125S
140mm - Using gib fixing clips supplied/included
XFLP125C
140mm - Using gib fixing clips supplied/included
XFLP150S
173mm - Using gib fixing clips supplied/included
XFLP150C
173mm - Using gib fixing clips supplied/included
DIMENSION INFORMATION (mm) Models
A
B
C
D
XFLP125S
161
122
10
118
XFLP125C
165
122
10
118
XFLP150S
191
122
10
150
XFLP150C
198
122
10
150
Dimensions - XFLP
A
A
A
C
D
B
TECHNICAL SPECIFICATION Models
XFLP125
XFLP150
Power
220 - 240V (SELV models 12V)
220 - 240V (SELV models 12V)
Fan Performance
36 l/s, 130m /hr
87 l/s, 313m3/hr
Fan Wattage
20W
25W
Maximum Pressure
35 Pa
60 Pa
Fan Speed
2000 RPM
2400 RPM
Sound Level
41 dB(A)
40 dB(A)
Max. Operating Temp
50°C
50°C
IP Rating
IPX4
IPX4
Performance - XFLP125
3
Performance - XFLP150
Thomas and Betts | www.manrose.com.au |
[email protected]
13
Manrose CLASSIC WALL/CEILING MOUNTED FANS XF Models
STANDARD Models Duct Size 100mm
Model No. XF100S
Switching Method Standard
Performance
Order Code
3
FAN0046
3
23 l/s, 85m /hr
100mm
XF100P
Pull Cord
23 l/s, 85m /hr
FAN0047
100mm
XF100T
Timer
23 l/s, 85m3/hr
FAN0048
3
125mm
XF125S
Standard
36 l/s, 130m /hr
FAN0072
125mm
XF125P
Pull Cord
36 l/s, 130m3/hr
FAN0074
3
125mm
XF125T
Timer
36 l/s, 130m /hr
FAN0075
150mm
XF150S
Standard
87 l/s, 313m3/hr
FAN0120
3
150mm
XF150P
Pull Cord
87 l/s, 313m /hr
FAN0126
150mm
XF150T
Timer
87 l/s, 313m3/hr
FAN0127
150mm
XF150PIR
PIR Control
3
87 l/s, 313m /hr
Standard Model
FAN0124
AUTO SHUTTER Models Duct Size
Model No.
Switching Method
Performance
Order Code
150mm
XF150A
Standard
87 l/s, 313m3/hr
FAN0121
150mm
XF150AP
Pull Cord
87 l/s, 313m3/hr
FAN0122
150mm
XF150AT
Timer
87 l/s, 313m3/hr
FAN0123
Safety extra low voltage (selv) models
Auto Shutter Model
Order Code
100mm
XF100LV
SELV 12V
23 l/s, 85m3/hr
FAN0044
3
125mm
XF125LV
SELV 12V
36 l/s, 130m /hr
FAN0071
150mm
XF150LV
SELV 12V
87 l/s, 313m3/hr
FAN0119
Please Note: An isolating transformer is required for all low voltage fans. Low Voltage models do not include a transformer. (We recommend a SELV isolating transformer Order Code: FAN2402).
Safety Model (SELV)
• Designed for wall or ceiling mounting, these models are efficient and easy to install. • These axial fans have been upgraded with ball bearing motors to prolong the life of the motor. • Supported by a 5 year warranty.
R
Performance
EA
Switching Method
LB
Model No.
BAL
Duct Size
Switching Options 1. Standard Model - operates from remote switch (not supplied). 2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off - adjustable 1-20 minutes. 3. Pull Cord Model - Integral pull cord switch on fan.
4. Auto Shutters - Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts. 5. PIR Model - Motion sensor incorporated in fan. 6. SELV Model - Suitable for installation in damp areas, zones 1, 2 and 3. NOTE: All fan flow rates quoted are free air delivery
14
GM
OT O R
5
IN
YEAR WARRANTY
TECHNICAL DATA GENERAL INFORMATION Models
Circular Cut-Out Size
XF100
112mm
XF125
135mm
XF150
160mm
Please note: Fan cut out size is a nominal diameter.
DIMENSION INFORMATION (mm)
Dimensions - XF
Models
A
B
C
D
E
XF100
155
98
74
27
155
XF125
168
118
74
27
168
XF150
200
148
74
27
200
XF150PIR
200
148
90
55
200
XF150A/AP
200
148
90
55
200
C
A
B
D
E
TECHNICAL SPECIFICATION Models
XF100
XF125
Power
220 - 240V (LV models 12V)
220 - 240V (LV models 12V) 3
220 - 240V (LV models 12V)
Fan Performance
23/s, 85m /hr
36 l/s, 130m /hr
87 l/s, 313m3/hr
Fan Wattage
20W
20W
25W
Maximum Pressure
20 Pa
35 Pa
60 Pa
Fan Speed
2400 RPM
2000 RPM
2400 RPM
Sound Level
41 dB(A)
41 dB(A)
40 dB(A)
Max. Operating Temp
50°C
50°C
50°C
IP Rating
IPX4
IPX4
IPX4
Performance - XF100
3
XF150
Performance - XF125
Performance - XF150
Thomas and Betts | www.manrose.com.au |
[email protected]
15
Manrose CLASSIC WALL/CEILING FANS XFS COMMERCIAL Models
Duct Size Model No. Switching Method
Performance
230mm
152 l/s, 550m3/hr
300mm 300mm
XFS230S XFS300S XFS300S
Standard Standard Standard
Order Code FAN0374
3
FAN2040
3
FAN2040
306 l/s, 1100m /hr 306 l/s, 1100m /hr
AUTO SHUTTER Models Commercial Models
Duct Size
Model No.
Switching Method
Performance
Order Code
3
230mm
XFS230A
Standard
152 l/s, 550m /hr
FAN0346
300mm
XFS300A
Standard
306 l/s, 1100m3/hr
FAN2041
Auto Shutter Models
Manrose Classic THRU WALL FAN KITS XPS COMMERCIAL Models
Duct Size Model No.
Switching Method
Performance
230mm
Standard
152 l/s, 550m3/hr
300mm
XPS230S XPS300S
Standard
Order Code FAN0455
3
306 l/s, 1100m /hr
FAN2042
AUTO SHUTTER Models Commercial Models
Duct Size
Model No.
Switching Method Performance
230mm
XPS230A
Standard
300mm
XPS300A
Standard
Order Code
152 l/s, 550m3/hr 3
306 l/s, 1100m /hr
FAN0348 FAN2043
BAL
LB
EA
R
Auto Shutter Models
GM
OT O R
5
IN
YEAR WARRANTY
16
TECHNICAL DATA GENERAL INFORMATION Models
Fan Cut-Out Size
Exterior Grille
Duct Type
Duct Length
XFS230
265mm
-
-
-
XFS300
310mm
-
-
-
XPS230
265mm
White Fixed Grille
Aluminium Semi-Rigid
375mm
XPS300
310mm
White Fixed Grille
Aluminium Semi-Rigid
375mm
Please note: Fan cut out size is a nominal diameter.
DIMENSION INFORMATION (mm) Models
A
B
C
D
E
F
G
H
I
XFS230
286
230
141
75
66
-
-
-
-
XFS300
362
300
156
81
75
-
-
-
-
XPS230
286
230
141
75
286
250
375
248
30
XPS300
362
300
156
81
350
230
375
298
50
Dimensions - XF230/300
Dimensions - XPS230/300
C
C
E A
B
E A
G
I
H
F
D
B
A
D
TECHNICAL SPECIFICATION Models
XFS230
XFS300
XPS230
XPS300
Power
220 - 240V
220 - 240V
220 - 240V
220 - 240V
Fan Performance
152 l/s, 550m³/hr
306 l/s, 1100m³/hr
152 l/s, 550m³/hr
306 l/s, 1100m³/hr
Fan Wattage
45W
82W
45W
82W
Maximum Pressure
50 Pa
60 Pa
50 Pa
60 Pa
Fan Speed
1250 RPM
1300 RPM
1250 RPM
1300 RPM
Sound Level
50 dB(A)
60 dB(A)
50 dB(A)
60 dB(A)
Max. Operating Temp
50°C
50°C
50°C
50°C
IP Rating
IPX4
IPX4
IPX4
IPX4
Performance - XFS230
Performance - XFS300
Thomas and Betts | www.manrose.com.au |
[email protected]
17
WHISPERVENT CEILING FANS CENTRIFUGAL CEILING FAN MODELS Duct Size
Model No.
Colour
Performance
Order Code
100mm
WVC100W
White
63 l/s, 225m3/hr
FAN0884
100mm
WVC100S
Stainless
63 l/s, 225m3/hr
FAN0885
150mm
WVC150S
White
100 l/s, 360m3/hr
FAN2465
• • • •
Designed for apartments where space is limited, these ceiling mounted fans can be installed in confined spaces. The centrifugal fan design assists‘whisper quiet’ operation. Reliable long lasting ball bearinng motor Supported by a 3 year warranty.
NEW
Simx Whispervent 150 - White
3
YEAR WARRANTY
Simx Whispervent 100 - Silver
2
YEAR WARRANTY
Switching Options 1. Standard Model - operates from remote switch (not supplied).
18
TECHNICAL DATA
DIMENSION INFORMATION (mm) Models
A
B
C
D
WhisperVent 100
240
290
172
98
WhisperVent 150
310
330
370
37
Dimensions - WhisperVent 100
E
F
184
30
Dimensions - WhisperVent 150
D
A
B
C C
C
A
B
E
D
TECHNICAL SPECIFICATION Models
WhisperVent 100
WhisperVent 150
Power
220 - 240V
220 - 240V 3
Fan Performance
63 l/s, 225m /hr
100 l/s, 360m3/hr
Fan Wattage
30W
42W
Maximum Pressure
105 Pa
145 Pa
Fan Speed
2500 RPM
2500 RPM
Sound Level
38 dB(A)
44 dB(A)
Max. Operating Temp
40 °C
40 °C
IP Rating
IPX4
IPX4
Performance - WhisperVent 100
Performance - WhisperVent 150
Airflow (m³/hr) 0
50
100
150
200
250
300
350
400
160
50
100
150
200
250 140
120
Pressure (Pa)
100
80
60
40
20
15
30
45
60
75
0 0
20
40
60
80
100
120
Airflow (l/s)
Thomas and Betts | www.manrose.com.au |
[email protected]
19
Manrose CLASSIC Multi-Vent Fans FLUSH FITTING RANGE
Duct Size Model No.
Switching Method
Performance @ Speed 3
Order Code
100mm
FFCF234S
Standard
65 l/s, 234m3/hr
FAN0038
100mm
FFCF234T
Timer
65 l/s, 234m3/hr
FAN0499
100mm
FFCF234PIR
PIR
65 l/s, 234m3/hr
FAN0501
SURFACE MOUNT RANGE
Flush Fitting Range
Duct Size Model No.
Switching Method
Performance @ Speed 3
Order Code
100mm
SMCF234S
Standard
65 l/s, 234m3/hr
FAN0504
100mm
SMCF234T
Timer
65 l/s, 234m3/hr
FAN0505
• • •
Designed for apartments where space is limited, with a choice of wall or ceiling mounted system. These Models include centrifugal fans with a choice of three in-built speed settings depending on the performance required. Supported by a 2 year warranty.
Manrose CLASSIC WALL FAN CF CENTRIFUGAL MODELS Duct Size Model No.
Switching Method
Performance @ Speed 1
Order Code
100mm
CF200S
Standard
31 l/s, 110m3/hr
FAN0041
100mm
CF200TP
Timer
31 l/s, 110m3/hr
FAN0042 CF Centrifugal Model
• Designed to move air over long distances. • The centrifugal fan design provides efficient airflow and quiet operation. • Supported by a 2 year warranty.
2
YEAR WARRANTY
1. Standard Model - operates from remote switch (not supplied).
3. PIR Model - Motion sensor incorporated in fan. Range up to 5 metres.
2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off - adjustable 1-20 minutes. Requires three wires: permanent phase, switched phase, neutral.
NOTE: All fan flow rates quoted are free air delivery.
20
TECHNICAL DATA
DIMENSION INFORMATION (mm) Models
A
B
C
D
E
F
G
H
Multi-Vent FFCF234
91
96
141
250
15
155
210
-
Multi-Vent SMCF234 312
250
15
119.5
22.5
63
249
-
CF200
65
185
260
45
98
90
135
65
Dimensions - CF200
Dimensions - Multi-Vent (Flush Fitting)
B
Dimensions - Multi-Vent (Surface Mount)
B
C
A
G
E
E
A
C F
C
A
G H
D
D
E
F G
G
D
D
B
TECHNICAL SPECIFICATION Models
Multi-Vent
CF200
1 Speed
2 Speed
3 Speed
Power
220 - 240V
220 - 240V
220 - 240V
220 - 240V
Fan Performance
28 l/s, 100m3/hr
45 l/s, 162m3/hr
65 l/s, 234m3/hr
31 l/s, 110m3/hr
Fan Wattage
40W
80W
110W
45W
Maximum Pressure
140 Pa
165 Pa
180 Pa
120 Pa
Fan Speed
950 RPM
1500 RPM
1850 RPM
1400 RPM
Sound Level
37 dB(A)
51 dB(A)
56 dB(A)
45 dB(A)
Max. Operating Temp
50°C
50°C
50°C
50°C
IP Rating
IPX4
IPX4
IPX4
IPX4
Performance - CF200
Performance - Multi-Vent
Volume m3/hr
0
54
108
162
216
270
60
75
200 180 160
Static Pressure Pa
140 120 100
2
80
3
1
60 40 20 0 0
15
30
45
Volume l/sec
NOTE 1, 2, 3 refer to speed settings controlled by internal switch (not consumer adjustable).
Thomas and Betts | www.manrose.com.au |
[email protected]
21
Manrose Pro-Series THRU WALL mounted FAN kits XPLP Low Profile Models STANDARD Models Duct Size Model No. 125mm
XPLP125SS
Switching Method
Performance
Order Code
Standard
36 l/s, 130m3/hr
FAN0614
3
125mm
XPLP125ST
Timer
36 l/s, 130m /hr
FAN0615
150mm
XPLP150SS
Standard
87 l/s, 313m3/hr
FAN0621
150mm
XPLP150ST
Timer
3
87 l/s, 313m /hr
FAN0623
Standard Models
Safety extra low voltage (selv) models Duct Size Model No.
Switching Method
Performance
Order Code
125mm
XPLP125SLV
SELV 12V
36 l/s, 130m3/hr
FAN0620
125mm
XPLP125CLV
SELV 12V
36 l/s, 130m3/hr
FAN0735
3
150mm
XPLP150SLV
SELV 12V
87 l/s, 313m /hr
FAN0732
150mm
XPLP150CLV
SELV 12V
87 l/s, 313m3/hr
FAN0738 Low Voltage Models
Please Note: An isolating transformer is required for all low voltage fans. Low Voltage models do not include a transformer. (We recommend a SELV isolating transformer Order Code: FAN2402).
ACCESSORIES
Satin Silver Fascia
FAN2068
125mm
Chrome Fascia
FAN0755
150mm
Satin Silver Fascia
FAN2071
150mm
Chrome Fascia
FAN0598
Duct Size
Description - Circular
Order Code
125mm
Satin Silver Fascia
FAN2069
125mm
Chrome Fascia
FAN0757
150mm
Satin Silver Fascia
FAN2070
150mm
Chrome Fascia
FAN0613
• • •
The unique Low Profile design enables these fans to be installed unobtrusively into any wall (requires a minimum wall cavity of 110mm). These axial fans have been upgraded with ball bearing motors to prolong the life of the motor. Supported by a 5 year warranty.
Accessories - Square
Accessories - Circular Fascia
R
125mm
EA
Order Code
LB
Description - Square
BAL
Duct Size
Note 1. Standard Model - operates from remote switch (not supplied).
3. SELV Models - Suitable for installation in damp areas, zones 1, 2 and 3.
2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off - adjustable 1-20 minutes. Requires permanent phase and switched phase.
NOTE: All fan flow rates quoted are free air delivery.
22
GM
OT O R
5
IN
YEAR WARRANTY
Technical data GENERAL INFORMATION Models
Fan Cut-Out Size
Exterior Grille
Duct Type
Duct Length
XPLP125
140mm
White Gravity Shutter
Aluminium Semi-Rigid
375mm
XPLP150
173mm
White Gravity Shutter
Aluminium Semi-Rigid
375mm
Please note: Fan cut out size is a nominal diameter.
DIMENSION INFORMATION (mm) Models
A
B
C
D
E
F
G
H
I
XPLP125
161
118
128
10
160
125
375
123
30
XPLP150
191
150
132
10
174
150
375
148
30
Dimensions - XPLP
I E
G H
F
B
A
C
D
TECHNICAL SPECIFICATION Models
XPLP125
XPLP150
Power
220 - 240V (LV models 12V)
220 - 240V (LV models 12V)
Fan Performance
36 l/s, 130m /hr
87 l/s, 313m3/hr
Fan Wattage
20W
25W
Maximum Pressure
35 Pa
60 Pa
Fan Speed
2000 RPM
2400 RPM
Sound Level
41 dB(A)
40 dB(A)
Max. Operating Temp
50°C
50°C
IP Rating
IPX4
IPX4
Performance - XPLP125
3
Performance - XPLP150
Thomas and Betts | www.manrose.com.au |
[email protected]
23
Manrose CLASSIC THRU WALL MOUNTED FAN KITS XP Models
STANDARD Models Duct Size
Model No.
Switching Method
Performance
Order Code
100mm
XP100S
Standard
23 l/s, 85m3/hr
FAN0053
100mm 100mm 125mm
XP100P XP100T XP125S
3
Pull Cord
23 l/s, 85m /hr
FAN0054
3
Timer
23 l/s, 85m /hr
Standard
FAN0055
3
FAN0080
3
36 l/s, 130m /hr
125mm
XP125P
Pull Cord
36 l/s, 130m /hr
FAN0082
125mm
XP125T
Timer
36 l/s, 130m3/hr
FAN0083
150mm 150mm 150mm
XP150S XP150P XP150T
Standard
3
FAN0135
3
FAN0140
3
FAN0141
87 l/s, 313m /hr
Pull Cord
87 l/s, 313m /hr
Timer
87 l/s, 313m /hr
Standard Models
AUTO SHUTTER Models Order Code
150mm
XP150A
Standard
87 l/s, 313m3/hr
FAN0136
150mm 150mm
XP150AP XP150AT
Pull Cord Timer
3
FAN0137
3
FAN0138
87 l/s, 313m /hr 87 l/s, 313m /hr
Safety extra low voltage (selv) models Duct Size
Model No.
Switching Method
Performance
Order Code
100mm
XP100LV
SELV 12V
25 l/s, 85m3/hr
FAN0409
3
125mm
XP125LV
SELV 12V
36 l/s, 130m /hr
FAN0410
150mm
XP150LV
SELV 12V
87 l/s, 313m3/hr
FAN0411
Please Note: An isolating transformer is required for all low voltage fans. Low Voltage models do not include a transformer. (We recommend a SELV isolating transformer Order Code: FAN2402).
• • •
These fans are designed to be ducted straight through an exterior wall and are efficient and easy to install. These axial fans have been upgraded with ball bearing motors to prolong the life of the motor. Supported by a 5 year warranty.
Auto Shutter Models
Low Voltage Models
R
Performance
EA
Switching Method
LB
Model No.
BAL
Duct Size
Note 1. Standard Model - operates from remote switch (not supplied).
3. Pull Cord Model - Integral pull cord switch on fan.
2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off - adjustable 1-20 minutes. Requires three wires: permanent phase, switched phase, neutral.
4. Auto Shutters - Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts. 5. SELV Models - Suitable for installation in damp areas, zones 1, 2 and 3. NOTE: All fan flow rates quoted are free air delivery.
24
GM
OT O R
5
IN
YEAR WARRANTY
Technical data GENERAL INFORMATION Models
Fan Cut-Out Size
Exterior Grille
Duct Type
Duct Length
XP100
112mm
Grey Gravity Shutter
Aluminium Semi-Rigid
375mm
XP125
135mm
Grey Gravity Shutter
Aluminium Semi-Rigid
375mm
XP150
160mm
Grey Gravity Shutter
Aluminium Semi-Rigid
375mm
Please note: Fan cut out size is a nominal diameter.
DIMENSION INFORMATION (mm) Models
A
B
C
D
E
F
G
H
I
XP100
155
98
74
27
138
100
375
98
30
XP125
168
118
74
27
160
125
375
123
30
XP150
200
148
74
27
174
150
375
148
30
XP150A
200
148
90
55
174
150
375
148
30
Dimensions - XP
C I
E
D
G H
F
B
A
TECHNICAL SPECIFICATION Models
XP100
XP125
XP150
Power
220 - 240V (SELV models 12V)
220 - 240V (SELV models 12V)
220 - 240V (SELV models 12V)
Fan Performance
23 l/s, 85m³/hr
36 l/s, 130m³/hr
87 l/s, 313m³/hr
Fan Wattage
20W
20W
25W
Maximum Pressure
20 Pa
35 Pa
60 Pa
Fan Speed
2400 RPM
2000 RPM
2400 RPM
Sound Level
41 dB(A)
41 dB(A)
40 dB(A)
Max. Operating Temp
50°C
50°C
50°C
IP Rating
IPX4
IPX4
IPX4
Performance - XP100
Performance - XP125
Performance - XP150
Thomas and Betts | www.manrose.com.au |
[email protected]
25
Manrose CLASSIC WINDOW MOUNTED FANS WF Models
STANDARD Models Duct Size Model No.
Switching Method
Performance
Order Code
100mm
WF100P
Pull Cord
23 l/s, 85m3/hr
FAN0021
100mm
WF100PLV
Low Voltage
23 l/s, 85m3/hr
FAN0452
Manual SHUTTER Models Standard Models
Duct Size Model No.
Switching Method
Performance
Order Code
150mm
WF150MP
Pull Cord
87 l/s, 313m3/hr
FAN0110
150mm
WF150MPLV
SELV 12
87 l/s, 313m3/hr
FAN0355
Please Note: An isolating transformer is required for all low voltage fans. Low Voltage models do not include a transformer. (We recommend a SELV isolating transformer Order Code: FAN2402).
AUTO SHUTTER Models Duct Size Model No.
Switching Method
Performance
Order Code
150mm
WF150AP
Pull Cord
87 l/s, 313m3/hr
FAN0107
150mm
WF150APT
Pull Cord Timer
87 l/s, 313m3/hr
FAN0109
Designed for use in situations where an existing window fan is being replaced or where there is no available external wall space or ceiling space access. These axial fans have been upgraded with ball bearing motors to prolong the life of the motor and are Supported by a 5 year warranty.
Auto Shutter Models
BAL
LB
EA
R
• •
GM
OT O R
5
IN
YEAR WARRANTY
Switching Options 1. Standard Model - operates from remote switch (not supplied). 2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off - adjustable 1-20 minutes. 3. Pull Cord Model - Integral pull cord switch on fan.
4. Auto Shutters - Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts. 5. Manual Pull cord - Pull cord operates fan and manual shutters. 6. SELV Models - Suitable for installation in damp areas, zones 1, 2 and 3. NOTE: All fan flow rates quoted are free air delivery.
26
Technical data GENERAL INFORMATION Models
Glass Cut-Out Size
WF100
115mm - 155mm
WF150
165mm - 190mm
Please note: Glass cut out size is a nominal diameter for a circular cut-out.
DIMENSION INFORMATION (mm) Models
A
B
C
Dimensions - WF
B
D
WF100
163
90
30
163
WF150
203
118
23
203
A
C
D
TECHNICAL SPECIFICATION Models
WF100
WF150
Power
220 - 240V
220 - 240V (SELV models 12V)
Fan Performance
23 l/s, 85m³/hr
87 l/s, 313m³/hr
Fan Wattage
20W
25W
Maximum Pressure
20 Pa
60 Pa
Fan Speed
2400 RPM
2400 RPM
Sound Level
41 dB(A)
40 dB(A)
Max. Operating Temp
50°C
50°C
IP Rating
IPX4
IPX4
Performance - WF100
Performance - WF150
Thomas and Betts | www.manrose.com.au |
[email protected]
27
Manrose CLASSIC WINDOW COMMERCIAL FANS WF Commercial MODELS Standard Models Duct Size Model No. Switching Method
Performance
Order Code
230mm
WF230P
Pull Cord
152 l/s, 550m3/hr
FAN0148
300mm
WF300P
Pull Cord
306 l/s, 1100m3/hr
FAN0481
AUTO SHUTTER Models Standard Larger Models
Duct Size Model No. Switching Method
Performance
Order Code
230mm
WF230AP
Pull Cord
152 l/s, 550m3/hr
FAN0146
300mm
WF300A
Standard
306 l/s, 1100m3/hr
FAN0482
• •
Designed for use in situations where an existing window fan is being replaced or where there is no available external wall space or ceiling space access. These axial fans have been upgraded with ball bearing motors to prolong the life of the motor and are Supported by a 5 year warranty.
Auto Shutter Models
Manrose CLASSIC WINDOW COMMERCIAL FANS COM Commercial Models Duct Size Model No.
Switching Method
Performance
Order Code
230mm
COM230A
Standard
185 l/s, 670m3/hr
FAN0519
230mm
COM230MP Pull Cord
185 l/s, 670m3/hr
FAN0518
300mm
COM300A
Standard
280 l/s,1020m3/hr
FAN0521
300mm
COM300MP Pull Cord
280 l/s,1020m3/hr
FAN0520
Commercial Auto Shutter Models
BAL
LB
EA
R
• Designed for commercial applications such as pubs, restaurants, hotels, shops etc. • These axial fans include ball bearing motors to prolong the life of the motor. • Supported by a 5 year warranty.
GM
OT O R
5
IN
YEAR WARRANTY
Switching Options 1. Standard Model - operates from remote switch (not supplied). 2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off - adjustable 1-20 minutes. 3. Pull Cord Model - Integral pull cord switch on fan.
4. Auto Shutters - Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts. 5. Manual Pull cord - Pull cord operates fan and manual shutters. 6. SELV Models - Suitable for installation in damp areas, zones 1, 2 and 3. NOTE: All fan flow rates quoted are free air delivery.
28
Technical data GENERAL INFORMATION Models
Glass Cut-Out Size
WF230
255mm - 270mm
WF300
310mm - 345mm
COM230
255mm - 270mm
COM300
310mm - 345mm
Dimensions - WF230/300
C
B
Please note: Glass cut out size is a nominal diameter for a circular cut-out.
A
DIMENSION INFORMATION (mm)
D
E
Dimensions - COM230/300
Models
A
B
C
D
E
WF230
286
286
4-32
112
25
WF300
362
362
4-32
133
29
COM230
286
125
25
154
-
COM300
362
145
25
170
-
A
B
A D C
TECHNICAL SPECIFICATION Models
WF230
Power
220 - 240V
WF300
COM230
220 - 240V 3
COM300
220 - 240V 3
220 - 240V 3
Fan Performance
152 l/s, 550m /hr
306 l/s, 1100m /hr
185 l/s, 670m /hr
280 l/s, 1020m3/hr
Fan Wattage
45W
82W
45W
82W
Maximum Pressure
50 Pa
60 Pa
50 Pa
60 Pa
Fan Speed
1250 RPM
1300 RPM
1600 RPM
1300 RPM
Sound Level
50 dB(A)
60 dB(A)
53 dB(A)
60 dB(A)
Max. Operating Temp
50°C
50°C
50°C
50°C
Performance - WF230
Volume m 3/hr 0
250
500
750
Performance - WF300
Performance - COM230
Volume m 3/hr 300
600
900
1200
1500
0
83
168
250
333
416
Performance - COM300
55 Static Pressure Pa
Static Pressure Pa
55
0
40
40
25
25
0
0 0
70
140 Volume l/sec
210
Volume l/sec
Thomas and Betts | www.manrose.com.au |
[email protected]
29
Manrose PRO-SERIES HEAT/FAN/LIGHT KITS Heat ‘n Vent Models Duct Size Model No.
Performance
Order Code
125mm
Heat ‘n Vent 4
60 l/s, 216m3/hr
FAN0995
125mm
Heat ‘n Vent 2
50 l/s, 180m3/hr
FAN0940
ACCESSORIES
Pro-Series Heat ‘n Vent 4
Duct Size Description
Order Code
125mm
Heat ‘n Vent 4 Silver Fascia
FAN1015
125mm
Heat ‘n Vent 2 Silver Fascia
FAN1014
275W Heat Lamp
LHT0081
50W Halogen GU10 lamp
LHT0140 Pro-Series Heat ‘n Vent 2
• • •
With a 40% increase in performance* these systems meet the demands of larger bathrooms and the stylish fascia blends into the decor. These high efficiency centrifugal fans incorporate a unique anti-condensate design feature. Supported by a 5 year warranty.
Manrose CLASSIC Heat/FAN/LIGHT KIT Heat ‘n Vent 2
Duct Size Model No.
Performance
Order Code
100mm
35 l/s, 126m3/hr
FAN2162
Heat ‘n Vent 2
• This system delivers instant heat combined with ventilation and soft lighting to create a comfort area in small bathrooms. • Supported by a 5 year warranty.
Classic Heat ‘n Vent 2
Manrose CLASSIC Heat/LIGHT KIT 2 Heat ‘n LIGHT
• This system provides instant heat and additional lighting. • For a complete bathroom solution an extraction fan can be added. • Supported by a 5 year warranty.
2 Heat ‘n Light R
FAN2200
2 Heat ‘n Light (excludes fan)
EA
100mm
LB
Order Code
BAL
Duct Size Description
GM
OT O R
5
IN
YEAR WARRANTY
(Excludes Lamps) Switching Options 1. Standard Model - operates from remote switch (not supplied). *Increase in performance is based on the comparison to the previous models.
30
NOTE: All fan flow rates quoted with 3 metres of duct, one bend and one external grille (normal installation).
Technical data GENERAL INFORMATION Models
Cut-Out Size
Exterior Grille
Duct Type
Duct Length
PS Heat ‘n Vent 4
300mm x 300mm
White Eggcrate
Aluminium
3m supplied (you can add up to 3m extra duct)
PS Heat ‘n Vent 2
390mm x 210mm
White Eggcrate
Aluminium
3m supplied (you can add up to 3m extra duct)
Classic Heat ‘n Vent 2 390mm x 220mm
White Eggcrate
Aluminium
3m supplied (you can add up to 3m extra duct)
Classic Heat ‘n Light
-
-
-
390mm x 220mm
DIMENSION INFORMATION (mm) Models
A
B
C
D
PS Heat ‘n Vent 4
338
338
170
120
PS Heat ‘n Vent 2
435
260
185
120
Heat ‘n Vent
450
250
195
100
Heat ‘n Light
450
250
195
100
Dimensions - PS Heat ‘n Vent 2
Dimensions - PS Heat ‘n Vent 4
Dimensions - Classic Heat ‘n Vent
D C
B
A
Dimensions - Classic 2 Heat ‘n Light
D
D C
C
C
B
B
B A
A
TECHNICAL SPECIFICATION Models
PS Heat ‘n Vent 4
PS Heat ‘n Vent 2
Heat ‘n Vent 2
2 Heat ‘n Light
Power
220 - 240V
220 - 240V
220 - 240V
220 - 240V
Fan
Centrifugal
Centrifugal
Centrifugal
-
Fan Performance
60 l/s, 216m³/hr
50 l/s, 180m³/hr
35 l/s, 126m³/hr
-
Heat Lamps
4 x 275W
2 x 275W
2 x 275W
2 x 275W
Light
GU10 Halogen
GU10 Halogen
GLES
GLES
Total Wattage
1180W
635W
670W
650W
Light Wattage
50W
50W
100W
100W
Switch Plate
4 sw. (supplied)
3 sw. (supplied)
3 sw. (supplied)
2 sw. (supplied)
Warranty
5 Years
5 Years
5 Years
5 Years
Performance Graph
Icon Key 36
72
108 144
03
180
02
216
252
01
288
01
Pro-Series Heat ‘n Vent 4
02
Pro-Series Heat ‘n Vent 2
03
Classic Heat 'n Vent 2
Note: Performance tested in free air. 70
Thomas and Betts | www.manrose.com.au |
[email protected]
31
PRO-SERIES IN-LINE MOUNTED FAN KITS MIXFLO™ Shower Fan Models Duct Size Model No.
Switching Method
Performance
Order Code
100mm
Standard
69 l/s, 250m3/hr
FAN2049
150mm
MFLP125S MFLP150S
Standard Standard
3
89 l/s, 320m /hr 3
166 l/s, 597m /hr
FAN2050 FAN2051 MKLP150
BAL
LB
EA
• These powerful in-line mixed flow fans have been designed to produce higher working pressures for applications that require higher airflows with low relative noise levels. • Supported by a 5 year warranty.
R
125mm
MFLP100S
Grille Cut-Out
Interior Grille
Exterior Grille
MFLP100 115mm
White Low Profile
White Low Profile Unilok Nude
6m supplied (you can add up to 6m extra duct)
MFLP125 140mm
White Low Profile
White Low Profile Unilok Nude
6m supplied (you can add up to 6m extra duct)
MFLP150 160mm
White Low Profile
White Low Profile Unilok Nude
6m supplied (you can add up to 6m extra duct)
Please note: Grille cut out size is a nominal diameter for a circular cut-out.
Switching Options 1. Standard Model - operates from remote switch (not supplied).
32
OT O R
YEAR WARRANTY
GENERAL INFORMATION (KITS) Models
GM
5
IN
Duct Type
Duct Length
Technical data
Dimension INFORMATION (mm) Models
A
B
C
D
E
F
G
MF100
98
182
315
100
100
168
27
MF125
122
182
350
100
100
168
60
MF150
147
209
360
130
115
195
55
Dimensions - MF
TECHNICAL SPECIFICATION Model No
Size (mm)
MF100
100
MF125
125
MF150
150
RPM Watts
Maximum Airflow (m³/hr)
Maximum Pressure (Pa)
2300
40
250
180
1700
18
190
120
2300
40
320
220
1700
18
260
160
2700
70
597
300
2000
60
330
240
Performance - MF100
50
100
150
IP Rating
Max Operating Temp °C
40
X4
45
43
X4
45
47
X4
60
Performance - MF125
Airflow (m3/hr) 0
Lp dB(A) 3m*
Performance - MF150
Airflow (m3/hr) 200
250
300
0
50
100
150
Airflow (m3/hr)
200
250
300
0
350
250
200
200
300
400
500
600
700
350
180
300 200
160
250
140 120 100 80
Pressure (Pa)
150
Pressure (Pa)
Pressure (Pa)
100
100
200 150 100
60 50
40
50
20 0
0 0
20
40
60
0 0
80
20
Airflow (L/s)
40
60
80
Airflow (L/s)
100
0
50
100
150
200
Airflow (L/s)
* Lp dB(A) @ 3 metres - sound pressure based on the high speed for each fan.
SOUND POWER LEVEL (high speed) Model No
Sound Power Levels Lw (dB) Octave band centre frequency in Hz
LwA dB(A)
125
250
500
1000 2000 4000 8000
MF100
50
56
58
58
52
47
37
61
MF125
52
59
60
60
56
49
41
63.5
MF150
58
66
65
63
62
54
46
67.5
Thomas and Betts | www.manrose.com.au |
[email protected]
33
Manrose PRO-SERIES IN-LINE FANS KITS SFLP Shower Fan Models
Model No.
Switching Method
Fan Type
Performance
Order Code
125mm
SFLP125S
Standard
Ctr’fgl
39 l/s, 140m³/hr
FAN0616
125mm
SFLP125T
Timer
Ctr’fgl
39 l/s, 140m³/hr
FAN0617
150mm
SFLP150S
Standard
Whisper
94 l/s, 340m³/hr
FAN0618
150mm
SFLP150T
Timer
Whisper
94 l/s, 340m³/hr
FAN0619
SFLP150
BAL
LB
EA
R
Duct Size
GM
OT O R
5
IN
YEAR WARRANTY
• These high efficiency in-line fans are designed to provide higher levels of extraction for today’s larger bathrooms. • Supported by a 5 year warranty.
General INFORMATION
Models
Grille Cut-Out
Interior Grille
Exterior Grille
Duct Type
Length of Duct included
SFLP125 140mm
White Low Profile
White Low Profile
Flexible Aluminium
4m supplied (can be extended up to 6m)
SFLP150 160mm
White Low Profile
White Low Profile
Flexible PVC
5m supplied (can be extended up to 12m)
Please note: Grille cut out size is a nominal diameter for a circular cut-out.
Switching Options 1. Standard Model - operates from remote switch (not supplied). 2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off. The 100 and 125mm models are adjustable between 1-20 minutes, whereas the 150mm models include
34
a fixed 7 minute timer. Both require three wires: permanent phase, switched phase. NOTE: All fan flow rates quoted are free air delivery. Performance will be affected by the length of ducting used.
Technical data
Dimension INFORMATION (mm) Models
A
B
C
D
E
SFLP125
155
125
125
195
258
SFLP150
200
143
170
185
-
Dimensions - SFLP125
Dimensions - SFLP150
C
A B
A
C
D
B
D
E
TECHNICAL SPECIFICATION Models
SFLP125
SFLP150
Fan
CFD225
WhisperVent
Power
220 - 240V
220 - 240V
Fan Performance
39 l/s, 140m³/hr
94 l/s, 340m³/hr
Fan Wattage
20W
46W
Maximum Pressure
120 Pa
160 Pa
Fan Speed
1400 RPM
2750 RPM
Sound Level
45 dB(A)
38 dB(A)
Max. Operating Temp
50°C
80°C
IP Rating
IPX4
IPX2
Performance - SFLP125
Performance - SFLP150
36
72
108 144
180
216
252
70
288
324 360
90
Thomas and Betts | www.manrose.com.au |
[email protected]
35
Manrose CLASSIC IN-LINE FAN KITS SF Shower Fan Models Model No.
Switching Method
Fan Type
Performance
Order Code
100mm
SF100S
Standard
Axial
23 l/s, 85m3/hr
FAN0017
100mm
SF100T
Timer
Axial
23 l/s, 85m3/hr
FAN0018
100mm
SF200S
Standard
Ctr’fgl
31 l/s, 110m3/hr
FAN0328
100mm
SF200T
Timer
Ctr’fgl
31 l/s, 110m3/hr
FAN0329
125mm
SF125S
Standard
Axial
36 l/s, 130m3/hr
FAN0064
125mm
SF125T
Timer
Axial
36 l/s, 130m3/hr
FAN0065
150mm
SF150S
Standard
Axial
87 l/s, 320m3/hr
FAN0101
150mm
SF150T
Timer
Axial
87 l/s, 320m3/hr
FAN0102
SF150 Shower Fan Kit
• • •
BAL
LB
EA
R
Duct Size
GM
YEAR WARRANTY
With the fan mounted in the ceiling space, these in-line models are able to draw steam directly from source. These fans have been upgraded with ball bearing motors to prolong the life of the motor. Supported by a 5 year warranty.
GENERAL INFORMATION Duct Type
Models
Grille Cut-Out
Interior Grille
Exterior Grille
SF100
115mm
White Circular
White Fixed Louvre Flexible PVC
3m supplied (should not be extended)
SF200
115mm
White Circular
White Fixed Louvre Flexible Alum
3m supplied (can be extended up to 6m)
SF125
140mm
White Circular
White Fixed Louvre Flexible PVC
4m supplied (should not be extended)
SF150
160mm
White Circular
White Fixed Louvre Flexible PVC
5m supplied (can be extended up to 12m)
Length of Duct included
Please note: Grille cut out size is a nominal diameter for a circular cut-out.
Switching Options 1. Standard Model - operates from remote switch (not supplied).
a fixed 7 minute timer. Both require: permanent phase and switched phase.
2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off. The 100 and 125mm models are adjustable between 1-20 minutes, whereas the 150mm models include
NOTE: All fan flow rates quoted are free air delivery.
36
OT O R
5
IN
Performance will be affected by the length of ducting used.
Technical data
DIMENSION INFORMATION (mm) Models
A
B
C
D
E
SF100
130
155
90
100
27
SF200
155
100
100
195
258
SF125
150
155
99
118
27
SF150
187
153
109
150
27
TECHNICAL SPECIFICATION Models
SF100
SF200
SF125
SF150
Fan
ID100
CFD200
ID125
Hyper
Power
220 - 240V
220 - 240V
220 - 240V
220 - 240V
Fan Performance
23 l/s, 85m³/hr
31 l/s, 110m³/hr
36 l/s, 130m³/hr
89 l/s, 320m³/hr
Fan Wattage
20W
20W
20W
38W
Maximum Pressure
20 Pa
120 Pa
35 Pa
135 Pa
Fan Speed
2400 RPM
1400 RPM
2000 RPM
2650 RPM
Sound Level
41 dB(A)
45 dB(A)
41 dB(A)
46 dB(A)
Max Operating Temp
50°C
50°C
50°C
70°C
IP Rating
IPX4
IPX4
IPX4
IPX2
Performance - SF100
Performance - SF125
Dimensions - SF100/SF125/150
C D
A
E
B Dimensions - SF200
B
A
C
D
E Performance - SF200
Performance - SF150 Note: PERFORMANCE - ID Fans maximum fan performance stated, this can vary depending on the length of ducting used.
Thomas and Betts | www.manrose.com.au |
[email protected]
37
Manrose PRO-SERIES IN-LINE FAN/LIGHT KITS ELLP Extract-a-lite Low Profile Models
Duct Size
Model No.
Switching Method
Performance
Order Code
125mm
ELLP125WS - Wht
Standard
39 l/s, 140m3/hr
FAN2029
125mm
ELLP125WT - Wht
Timer
39 l/s, 140m3/hr
FAN2031
125mm 125mm
ELLP125SS - Slv ELLP125ST - Slv
Standard Timer
3
FAN2030
3
FAN2032
3
39 l/s, 140m /hr 39 l/s, 140m /hr
150mm
ELLP150WS - Wht
Standard
94 l/s, 340m /hr
FAN2033
150mm
ELLP150WT - Wht
Timer*
94 l/s, 340m3/hr
FAN2035
150mm 150mm
ELLP150SS - Slv ELLP150ST - Slv
Standard Timer*
3
FAN2034
3
FAN2036
94 l/s, 340m /hr 94 l/s, 340m /hr
ELLP125SW
* Includes a 7 minute fixed timer
These high efficiency in-line fans are designed to provide higher levels of extraction for larger bathrooms and include a stylish downlight. White or satin silver finish available to complement your bathroom decor. Electronic Transformer included in the kit to operate the 12V downlight. Supported by a 5 year warranty.
LB
EA
R
ELLP150SS
BAL
• • • •
ACCESSORIES
GM
OT O R
5
IN
YEAR WARRANTY
Duct Size
Description
Order Code
125mm
Pro-Series ELLP Diffuser White incl lamp
DCT1519
125mm
Pro-Series ELLP Diffuser Silver incl lamp
DCT1520
150mm
Pro-Series ELLP Diffuser White incl lamp
DCT1521
150mm
Pro-Series ELLP Diffuser Silver incl lamp
DCT1522
12V 35-50W Dichroic lamp with 60˚ angle beam
FAN0431
Electronic Transformer 12VAC 50kHz
FAN2101
125mm ELLP Diffusers
GENERAL INFORMATION Models
Diffuser Cut-Out
Interior
Exterior Grille
Duct Type
Length of Duct included
ELLP125W
140mm
White Extract-a-lite incl light
White Low Profile
Black Unilok
6m supplied (you can add up to 6m extra duct)
ELLP125SS 140mm
Satin Silver Extract-a-lite incl light
White Low Profile
Black Unilok
6m supplied (you can add up to 6m extra duct)
ELLP150W
White Extract-a-lite incl light
White Low Profile
Black Unilok
6m supplied (you can add up to 6m extra duct)
Satin Silver Extract-a-lite incl light
White Low Profile
Black Unilok
6m supplied (can be extended up to 12m)
165mm
ELLP150SS 165mm
Please note: Diffuser cut out size is a nominal diameter for a circular cut-out. Switching Options 1. Standard Model - operates from remote switch (not supplied). 2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off. The 100 and 125mm models are adjustable between 1-20 minutes, whereas the 150mm models include
38
a fixed 7 minute timer. Both require: permanent phase, and switched phase. NOTE: All fan flow rates quoted are free air delivery. Performance will be affected by the length of ducting used.
Technical data
DIMENSION INFORMATION (mm) Models
A
B
C
D
E
F
G
H
ELLP125
155
125
125
195
258
165
80
110
ELLP150
200
143
170
185
-
200
80
148
Dimensions - ELLP125 Fan
Dimension - ELLP150 Fan
Dimensions - ELLP Extract-a-lite Diffuser
C
A B
A
C
D
H
B
G
D F
E
TECHNICAL SPECIFICATION Models
ELLP125
ELLP150
Fan
CFD225
WhisperVent
Power
220 - 240V
220 - 240V
Fan Performance
39 l/s, 140m³/hr
94 l/s, 340m³/hr
Fan Wattage
20W
46W
Maximum Pressure
120 Pa
160 Pa
Fan Speed
1400 RPM
2750 RPM
Light
12V 50W Halogen
12V 50W Halogen
Total Wattage
99W
96W
Sound Level
45 dB(A)
38 dB(A)
Max. Operating Temp
50°C
80°C
IP Rating
IPX4
IPX2
Performance - ELLP125
Performance - ELLP150
36
72
108 144
180
216
252
70
288
324 360
90
Thomas and Betts | www.manrose.com.au |
[email protected]
39
Manrose CLASSIC IN-LINE FAN/LIGHT KITS EL Extract-a-lite Models
EL100S
Standard
100mm
EL100T
125mm
Timer
EL125S
Standard
31 l/s, 110m3/hr
FAN0420
3
FAN0438
3
FAN2037
3
31 l/s, 110m /hr 36 l/s, 130m /hr
125mm
EL125T
Timer
36 l/s, 130m /hr
FAN2038
150mm
EL150S
Standard
89 l/s, 320m3/hr
FAN0803
150mm
EL150T
Timer*
89 l/s, 320m3/hr
FAN0804
EL150S
R
100mm
Order Code
EA
Switching Method Performance
LB
Model No.
BAL
Duct Size
OT O R
YEAR WARRANTY
* Includes a 7 minute fixed timer.
• • • •
GM
5
IN
The fan is mounted in the ceiling space, and is therefore able to draw steam directly from source, while at the same time providing spot lighting within your bathroom. These fans have been upgraded with ball bearing motors to prolong the life of the motor. Electronic Transformer included in the kit to operate the 12V downlight. Supported by a 5 year warranty.
ACCESSORIES EL Diffuser white incl lamp
DCT0360
100mm
EL Diffuser chrome incl lamp
DCT0362
125mm
EL Diffuser white incl lamp
DCT2121
125mm
EL Diffuser chrome incl lamp
DCT2120
150mm
EL Diffuser white incl lamp
DCT1169
150mm
EL Diffuser chrome incl lamp
DCT1171
100mm
Accessory chrome bezel - Extract-a-lite
DCT0366
125mm
Accessory chrome bezel - Extract-a-lite
FAN2076
150mm
Accessory chrome bezel - Extract-a-lite
FAN0827
12V 35-50W Dichroic lamp with 60˚ angle beam
FAN0431
Electronic Transformer 12VAC 50kHz
125mm EL Diffusers
R
100mm
EA
Order Code
LB
Description
BAL
Duct Size
GM
OT O R
5
IN
YEAR WARRANTY
FAN2101
GENERAL INFORMATION Models
Diffuser Cut-Out
Interior
Exterior Grille Duct Type
Length of Duct included
EL100
115mm
White Extract-a-lite incl light
White Eggcrate
Flexible PVC
3m supplied (should not be extended)
EL125
145mm
White Extract-a-lite incl light
White Eggcrate
Flexible PVC
4m supplied (should not be extended)
EL150
165mm
White Extract-a-lite incl light
White Eggcrate
Flexible PVC
5m supplied (you can add up to 12m extra duct)
Please note: Diffuser cut out size is a nominal diameter for a circular cut-out.
Switching Options 1. Standard Model - operates from remote switch (not supplied). 2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off. The 100 and 125mm models are adjustable between 1-20 minutes, whereas the 150mm models
40
include a fixed 7 minute timer. Both require: permanent phase and switched phase. NOTE: All fan flow rates quoted are free air delivery. Performance will be affected by the length of ducting used.
Technical data
DIMENSION INFORMATION (mm) Models
A
B
C
D
E
F
G
H
EL100
130
155
90
100
27
140
74
98
EL125
150
155
99
118
27
170
74
118
EL150
200
143
170
185
200
74
148
Dimensions - EL125
Dimensions - EL100
Dimensions - EL150 Fan
A
B
C
D
C
A
C D
A
B
E
B
D
E
TECHNICAL SPECIFICATION Models
EL100
EL125
EL150
Fan
CFD200
ID125
Hyper
Power
220 - 240V
220 - 240V
220 - 240V
Fan Performance
31 l/s, 110m3/hr
36 l/s, 130m3/hr
89 l/s, 320m3/hr
Fan Wattage
20W
25W
38W
Maximum Pressure
120 Pa
35 Pa
135 Pa
Fan Speed
1400 RPM
2000 RPM
2650 RPM
Light
12V 50W Halogen
12V 50W Halogen
12V 50W Halogen
Total Wattage
70W
75W
88W
Sound Level
45 dB(A)
41 dB(A)
46 dB(A)
Max. Operating Temp
40°C
40°C
70°C
IP Rating
IPX4
IPX4
IPX2
Performance - EL100
Performance - EL125
Dimensions - EL Extract-a-lite Diffuser
H G
F
Performance - EL150
36
72
108 144
180
216
252
70
288
324 360
90
Thomas and Betts | www.manrose.com.au |
[email protected]
41
Pro-Series IN-LINE MIXED FLOW FANS MIXFLO™ Fan Models Duct Size
Model No.
Switching Method
Speed Setting
Performance @ High Speed
Order Code
100mm
MF100S
Standard
2 Speed
69 l/s, 250m3/hr
FAN1004
100mm
MF100T
Timer
2 Speed
69 l/s, 250m3/hr
FAN2124
100mm
MF100PL Plug & Lead
2 Speed
69 l/s, 250m3/hr
FAN1050
125mm
MF125S
Standard
2 Speed
89 l/s, 320m3/hr
FAN1005
125mm
MF125T
Timer
2 Speed
89 l/s, 320m3/hr
FAN2125
3
125mm
MF125PL Plug & Lead
2 Speed
89 l/s, 320m /hr
FAN1051
150mm
MF150S
Standard
2 Speed
166 l/s, 597m3/hr
FAN1006
150mm
MF150T
Timer
2 Speed
166 l/s, 597m3/hr
FAN2126
3
150mm
MF150PL Plug & Lead
2 Speed
166 l/s, 597m /hr
FAN1048
200mm
MF200S
Standard
3 Speed
272 l/s, 980m3/hr
FAN1007
200mm
MF200T
Timer
2 Speed
272 l/s, 980m3/hr
FAN2127
200mm
MF200PL Plug & Lead
3 Speed
272 l/s, 980m3/hr
FAN1053
• These powerful in-line mixed flow fans have been designed to produce higher working pressures for applications that require higher airflows with low relative noise levels. • Supported by a four year warranty or 30,000 continuous hours.
Dimension information (mm) Dimensions - MF
Models
A
B
C
D
E
F
G
MF100
98
182
315
100
100
168
27
MF125
122
182
350
100
100
168
60
MF150
147
209
360
130
115
195
55
MF200
197
244
354
142
140
230
50
Switching Options 1. Standard Model - operates from remote switch (not supplied). NOTE: All fan flow rates quoted are free air delivery.
42
Mixflow 150mm Standard Model
4
YEAR WARRANTY
Technical data
technical specification 230V/50Hz/1Φ Motor Input (W)
Max Temp (ºC)
Sound Pressure Level (dBA@3m)
2300
0.40
45
40
1700
0.18
45
33
2300
0.40
45
43
1700
0.18
45
36
2700
0.70
60
47
2000
0.60
60
40
2700
0.85
60
48
2350
0.60
60
45
2000
0.45
60
41
Speed (rev/ min)
Model No.
MF100
MF125
MF150
MF200
Performance - MF100
SOUND POWER LEVEL (high speed)
125
250
500
1000
2000
4000
8000
MF100
50
56
58
58
52
47
37
MF125
52
59
60
60
56
49
41
MF150
58
66
65
63
62
54
46
MF200
65
69
64
63
62
60
48
Performance - MF125
Airflow (m3/hr) 0
50
100
Sound Power Levels LwA (dB) Octave band centre frequency in Hz
Model No.
150
Airflow (m3/hr) 200
250
300
0
50
100
150
200
250
300
350
250
200 180
200
160
Icon Key
Pressure (Pa)
Pressure (Pa)
140 120 100 80
150
Speed 1 Speed 2
100
Speed 3
60 50
40 20
0
0 0
20
40
60
0
80
20
Airflow (L/s)
Performance - MF150
100
200
60
80
100
Performance - *MF200
300
400
*MF200 Timer model only has 2 speeds, therefore Medium fan speed specifications will not apply.
Airflow (m3/hr)
Airflow (m3/hr) 0
40 Airflow (L/s)
500
600
700
350
0
200
0
50
400
600
800
1000
300
300
250
250 Pressure (Pa)
Pressure (Pa)
200 200 150 100
150
100
50
50 0 0
50
100 Airflow (L/s)
150
200
0 100
150
200
250
300
Airflow (L/s)
Thomas and Betts | www.manrose.com.au |
[email protected]
43
Manrose PRO-SERIES IN-LINE WHISPERVENT FAN
Duct Size Model No.
Switching Performance Method
150mm
Standard
94 l/s, 340m3/hr
FAN0916
LB
EA
R
This high efficiency in-line fan is designed to provide higher levels of extraction with low relative noise. The ball bearing motor prolongs the life of the motor. Supported by a 5 year warranty.
BAL
• • •
Whispervent WVI150
Order Code
GM
OT O R
5
IN
YEAR WARRANTY
Manrose CLASSIC IN-LINE Hyper FAN
• • • •
89 l/s, 320m3/hr
FAN0085
This high efficiency in-line fan is designed to provide high levels of extraction. The ball bearing motor prolongs the life of the motor. Includes 1.3m lead and 3 pin plug. Supported by a 5 year warranty.
R
Standard
Hyper150
EA
150mm
Order Code
LB
Switching Performance Method
BAL
Duct Size Model No.
GM
OT O R
5
IN
YEAR WARRANTY
Switching Options 1. Standard Model - operates from remote switch (not supplied). NOTE: All fan flow rates quoted are free air delivery.
44
Technical data
Dimension specification Models
A
B
C
D
WVI150
200
143
170
185
Hyper150
200
143
170
185
TECHNICAL SPECIFICATION Models
Whispervent WVI150
Hyper150
Power
220 - 240V
220 - 240V
Fan Performance
94 l/s, 340m³/hr
89 l/s, 320m³/hr
Fan Wattage
46W
38W
Maximum Pressure
160 Pa
135 Pa
Fan Speed
2750 RPM
2650 RPM
Sound Level
38 dB(A)
46 dB(A)
Max. Operating Temp
80°C
70°C
IP Rating
IPX2
IPX2
Performance - WhisperVent WVI150
36
72
108 144
180
216
Dimensions
C
A
B
D
Performance - Hyper150
252
70
288
324 360
90
36
72
108 144
180
216
252
70
288
324 360
90
Thomas and Betts | www.manrose.com.au |
[email protected]
45
Manrose CLASSIC IN-LINE AXIAL FANS ID Models Duct Size
Model No.
Switching Method
Performance 3
Order Code
100mm
ID100S
Standard
23 l/s, 85m /hr
FAN0012
100mm
ID100T
Timer
23 l/s, 85m3/hr
FAN0013
125mm
ID125S
Standard
36 l/s, 130m3/hr
FAN0060
3
125mm
ID125T
Timer
36 l/s, 130m /hr
FAN0061
150mm
ID150S
Standard
87 l/s, 313m3/hr
FAN0090
150mm
ID150T
Timer
87 l/s, 313m3/hr
FAN0091
230mm
ID230S
Standard
152 l/s, 550m3/hr
FAN0405
230mm
ID230T
Timer
152 l/s, 550m3/hr
FAN0406
• • •
ID100/125/150
With the fan mounted in the ceiling space, these in-line models are able to draw steam directly from the source. These axial fans have been upgraded with ball bearing motors to prolong the life of the motor. Supported by a 5 year warranty.
BAL
LB
EA
R
ID230
ECO IN-LINE AXIAL FANS
OT O R
YEAR WARRANTY
Duct Size
Model No.
Switching Method
Performance
Order Code
150mm
ECO150S
Standard
64 l/s, 230m3/hr
FAN2078
• • •
GM
5
IN
With the fan mounted in the ceiling space, these in-line models are able to draw steam directly from the source. High quality sleeve bearing motor. Supported by a 2 year warranty.
2
YEAR WARRANTY
Switching Options 1. Standard Model - operates from remote switch (not supplied). 2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off - adjustable 1-20 minutes. Requires three wires: permanent phase, switched phase, neutral.
46
NOTE: All fan flow rates quoted are free air delivery.
Technical data
Dimension specification Models
A
B
C
D
E
ID100
130
155
90
100
27
ID125
150
155
99
118
27
ECO150 (white)
187
153
109
150
27
ID150
187
153
109
150
27
ID230 (square model)
286
286
155
230
-
Dimensions - ID Fans
C D
A
E
B
TECHNICAL SPECIFICATION Models
ID100
ID125
ECO150
ID150
ID230
Power
220 - 240V
220 - 240V
220 - 240V
220 - 240V
220 - 240V
Fan Performance
23 l/s, 85m³/hr
36 l/s, 130m³/hr 64 l/s, 230m³/hr 87 l/s, 313m³/hr 152 l/s, 550m³/hr
Fan Wattage
20W
20W
25W
25W
80W
Maximum Pressure
20 Pa
35 Pa
50 Pa
60 Pa
50 Pa
Fan Speed
2400 RPM
2000 RPM
2400 RPM
2400 RPM
1250 RPM
Sound Level
41 dB(A)
41 dB(A)
40 dB(A)
40 dB(A)
50 dB(A)
Max. Operating Temp
50°C
50°C
50°C
50°C
50°C
IP Rating
IPX4
IPX4
IPX4
IPX4
IPX4
Performance - ID100
Performance - ID125
Performance - ID150
Performance - ID230
Performance - ECO150
Note: PERFORMANCE - ID Fans maximum fan performance stated, this can vary depending on the length of ducting used.
Thomas and Betts | www.manrose.com.au |
[email protected]
47
Manrose CLASSIC IN-LINE CENTRIFUGAL FANS CFD Models
Duct Size Model No.
Switch Method
Performance
Order Code
100mm
CFD200S
Standard
31 l/s, 110m³/hr
FAN0326
100mm
CFD200T
Timer
31 l/s, 110m³/hr
FAN0327
125mm
CFD225S
Standard
39 l/s, 140m³/hr
FAN2067
125mm
CFD225T
Timer
39 l/s, 140m³/hr
FAN2066 Manrose Classic In-Line CF 125mm Standard
LB
EA
R
These high efficiency centrifugal fans are designed for use where longer duct runs are required. The ball bearing motor prolongs the life of the motor. Supported by a 5 year warranty.
BAL
• • •
GM
OT O R
5
IN
YEAR WARRANTY
Technical data SPECIFICATION
DIMENSION INFORMATION (mm)
Models
CFD200
CFD225
Models
A
B
C
D
E
Power
220 - 240V
220 - 240V
CFD200
155
100
100
195
258
Fan Performance
31 l/s, 110m³/hr
39 l/s, 140m³/hr
CFD225
155
125
125
195
258
Fan Wattage
20W
20W
Maximum Pressure
120Pa
120Pa
Fan Speed
1400 RPM
1400 RPM
Sound Level
45 dB(A)
45 dB(A)
Max. Operating Temp
50°C
50°C
IP Rating
IPX4
IPX4
Performance - CFD200
Performance - CFD225
Dimensions - CFD200/CFD225
B
C
A
E
Switching Options 1. Standard Model - operates from remote switch (not supplied).
3. Requires: permanent phase and switched phase.
2. Timer Model - Fan operates from a switch, the fan continues to run for a preset time after switching off - adjust able 1-20 minutes.
NOTE: All fan flow rates quoted are free air delivery.
48
D
SIMX in-line CENTRIFUGAL 3 SPEED FANS High Performance Models Duct Size
Model No. Performance @ Speed 3
Order Code
150mm
3 Speed
115 l/s, 415m³/hr
FAN0921
200mm
3 Speed
208 l/s, 750m³/hr
FAN0997
• Suitable for a variety of domestic and commercial applications, these in-line centrifugal fans provide high performance at your preset choice of speed. • Supported by a 2 year warranty. Please note: Can be used for supply or extract.
2
TECHNICAL DATA
DIMENSION INFORMATION (mm)
YEAR WARRANTY
Dimensions
Models
A
B
C
D
E
150mm
340
150
154
50
75
200mm
340
200
280
50
50
TECHNICAL SPECIFICATION Models
150mm
200mm
Voltage/Freq (50hz)
220 - 240V
220 - 240V
Fan Performance Speed 1
65 l/s, 234m³/hr
125 l/s, 450m³/hr
Fan Performance Speed 2
90 l/s, 324m³/hr
170 l/s, 620m³/hr
Fan Performance Speed 3
124 l/s, 425m³/hr
205 l/s, 740m³/hr
Fan Wattage (at high speed)
65W
110W
Current (A) (at high speed)
0.36
0.38
Fan Speed (at high speed)
2460 RPM
2700 RPM
Sound Level*
43 dB(A)
56 dB(A)
Ambient Temp
50°C
60°C
* dB(A) - measured 1m free field. Performance - 200mm 3 Speed Performance - 150mm 3 Speed
200mm 3 Speed Centrifugal Fan Curve 400
Pressure (Pa)
300
200
100
100
200
300
400
500
600
700
800
900
1000
Airflow (m3/hr)
Thomas and Betts | www.manrose.com.au |
[email protected]
100
200
300
400
500
600
700
800
900
1000 Volume (m3/hr)
49
SIMX IN-LINE FANS
High Performance Centrifugal Models Duct Size
Model No
Performance
Order Code
100mm
MAN100
49 l/s, 176m3/hr
FAN0361
125mm
3
61 l/s, 220m /hr
MAN125
FAN0360
3
150mm
MAN150
115 l/s, 415m /hr
FAN0330
200mm
MAN200
208 l/s, 750m3/hr
FAN0467
250mm 315mm
3
FAN0358
3
FAN0357
280 l/s, 1010m /hr
MAN250
360 l/s, 1300m /hr
MAN315
• Suitable for a variety of domestic and commercial applications, these in-line centrifugal fans provide extremely high performance with a choice of sizes. • Supported by a 2 year warranty. Please note: Can be used for supply/extract.
Models
A
B
C
D
E
MAN100
250
100
136
50
70
MAN125
250
125
147
60
60
MAN150
340
150
154
50
75
MAN200
340
200
250
50
50
MAN250
320
249
310
65
65
MAN315
405
315
177
80
80
50
2
YEAR WARRANTY
DIMENSION INFORMATION (mm)
Dimensions
Simx 150mm In-Line Fan
TECHNICAL DATA Technical INFORMATION Models
MAN100
MAN125
MAN150
MAN200
MAN250
MAN315
Voltage/Freq (50hz)
220-240V
220-240V
220-240V
220-240V
220-240V
220-240V
Fan Performance
49 l/s, 176m³/hr
61 l/s, 220m³/hr
115 l/s, 415m³/hr
208 l/s, 750m³/hr
280 l/s, 1010m³/hr
360 l/s, 1300m³/hr
Fan Wattage
32W
31W
65W
110W
170W
200W
Maximum Pressure
153 Pa
143 Pa
320 Pa
418 Pa
500 Pa
590 Pa
Current (A)
0.14
0.13
0.35
0.45
0.76
0.87
Fan Speed (min -1)
2500 RPM
2490 RPM
2350 RPM
2520 RPM
2580 RPM
2410 RPM
Sound Level*
38 dB(A)
38 dB(A)
50 dB(A)
56 dB(A)
47 dB(A)
57 dB(A)
Max Operating Temp
60°C
60°C
50°C
60°C
50°C
45°C
* dB(A) - measured 1m free field.
Performance - MAN125
Performance - MAN100 Volume (m³/h) 0
20
40
Volume (m³/h) 60
0
80 100 120 140 160 180
100mm
100
150
200
250
0
100
100
80
80
60
60
Static Pressure (Pa)
120
40 20 0 0
10
20
30
125mm
140
120
40
0
10
20
30
Volume (m³/h) 0
450
40
50
60
200
400
400
300
350
250
300
800
0
150
200
250
20
40
Volume (m³/h) 0 200 400
1000
60
80
100
120
600
800
1000
1200
1400
600 315mm
250mm
500 400 300
200
Static Pressure (Pa)
Static Pressure (Pa) Volume l/s
50
0
250
200
100
150mm
Performance - MAN315
600
450
200mm
350
50
400
100
70
500
0
350
Volume l/s
0 100 200 300 400 500 600 700 800 900
0
300
0
Volume (m³/h)
50
250
150
Performance - MAN250
100
200
200
20
50
150
150
250
Volume l/s
400
100
300
40
Volume l/s
Performance - MAN200
50
350
Static Pressure (Pa)
140
Static Pressure (Pa)
Volume (m³/h)
50
160
160
Static Pressure (Pa)
Performance - MAN150
150 100 50 0 0
50
Volume l/s
100
150
200
250
300
200 100 0 0
50
100
150
200
250
300
350
400
Volume l/s
Thomas and Betts | www.manrose.com.au |
[email protected]
51
SIMX IN-LINE CENTRIFUGAL FANS WhisperVent Low Profile Models Duct Size
Model No
Performance
Order Code
150mm
WVILP150-1
124 l/s, 445m3/hr
FAN0829
150mm
WVILP150-3
118 l/s, 425m3/hr
FAN0830
• •
Suitable for a variety of domestic and commercial applications, this in-line centrifugal fan offers high performance with a low profile design to enable this unit to be installed in confined spaces. Supported by a 2 year warranty.
2
DIMENSION INFORMATION (mm)
YEAR WARRANTY
Models
A
B
C
D
E
WhisperVent Low Profile
313
168
148
340
218
Dimensions
A
D
E
B
52
ØC
TECHNICAL DATA
Technical specification
Models
Fan Speed
FAN0830
1
65 l/s, 234m³/hr
FAN0830
2
FAN0830 FAN0829
Fan Performance
Norm Fan Speed (RPM)
Single Phase Nom Watts
Nom Amps
1440
50
0.22
90 l/s, 324m³/hr
1860
56
0.24
3
124 l/s, 445m³/hr
2460
80
0.36
1
118 l/s, 425m³/hr
2520
80
0.36
SOUND POWER LEVEL
Model No
Sound Power Levels Lw (A) Octave band centre frequency in Hz
dB(A) @ 3m
63
125
250
500
1k
2k
4k
8k
FAN0830 - Speed 1
-
20
34
43
43
44
40
30
30
FAN0830 - Speed 2
-
26
40
51
51
52
45
38
36
FAN0830 - Speed 3
-
40
42
62
64
64
59
45
43
57
61
68
67
65
64
59
53
43
FAN0829
Performance - FAN0829 & FAN0830
Thomas and Betts | www.manrose.com.au |
[email protected]
53
SIMX EXTERNAL WALL MOUNTED Fans Extract MODELS Duct Size
Fan Type
Air
Performance
Order Code
150mm
Axial
Extract*
73 l/s, 263m3/hr
FAN2303
150mm
Ctr’fgl (190 Motor)
Extract
109 l/s, 392m3/hr
FAN2425
150mm
Ctr’fgl (220 Motor)
Extract
133 l/s, 480m3/hr
FAN2424
*Also available in a Supply Air option
• • •
Designed for use in residential and light commercial applications where a high performance, low noise solution is required. Specific applications include apartments where space is limited. Supported by a 2 year warranty.
150mm Ctr’fgl (190 Motor)
SIMX EXTERNAL WALL Mounted Fans 3 Speed Extract MODELS Duct Size
Fan Type
Air
Performance (High Speed)
Order Code
150mm
Ctr’fgl (190 Motor)
Extract
113 l/s, 408m3/hr
FAN2423
150mm
Ctr’fgl (220 Motor)
Extract
136 l/s, 493m3/hr
FAN2426
• • • •
Designed for use in residential and light commercial applications where a high performance, low noise solution is required. Three speed models enable further flexibility in a variety of applications. Specific applications include apartments where space is limited. Supported by a 2 year warranty.
Wall mounted with measurements
369mm 369mm
305mm 110mm 110mm
305mm
Switching Options 1. Electrical connection must be made internally (Junction Box is only suitable for internal use). NOTE: All fan flow rates quoted are free air delivery.
54
Fan Assembly - Line Drawing
2
YEAR WARRANTY
TECHNICAL DATA PERFORMANCE DATA
Order Code
Motor Size Description (mm)
FAN2303
150
FAN2425
Fan Performance m³/hr
l/s
Watts @ 230V
Axial
263
73
48
0.29
80
48
150
Centrifugal 190 Motor (1 Speed)
392
109
65
0.28
280
60
FAN2424
150
Centrifugal 220 Motor (1 Speed)
480
133
96
0.42
380
61
FAN2423
150
Centrifugal 190 Motor (3 Speed) High Speed
408
113
65
0.28
280
60
Medium Speed
340
94
57
0.25
250
56
Low Speed
277
77
55
0.24
200
46
High Speed
493
136
96
0.42
380
61
Medium Speed
408
113
69
0.34
340
56
Low Speed
340
94
60
0.31
280
50
FAN2426
Amps
Static Sound Level Pressure (Pa) (dB(A) @ 3m)
Centrifugal 220 Motor (3 Speed)
150
400 350
Icon Key
300
Pressure (Pa)
250 200
FAN2303 150mm AXIAL
150
FAN2425 150mm CENTRIFUGAL (190 Motor)
100 50
FAN2424 150mm CENTRIFUGAL (220 Motor)
0 0
50
100
150
Airflow (L/s)
400 350 300
Pressure (Pa)
250 200 150
FAN2423 150mm 3 SPEED CENTRIFUGAL (190 Motor)
100 50
FAN2426 150mm 3 SPEED CENTRIFUGAL (220 Motor)
0 0
50
100
150
Airflow (L/s)
Thomas and Betts | www.manrose.com.au |
[email protected]
55
THRU-ROOF MOUNTED FANS Thru Roof Fan Cowl Models Duct Size 150mm 150mm 150mm
Fan Type Ctr’fgl Ctr’fgl 3-spd Axial - Whisper
Air Extract Extract Extract
Performance
Order Code
3
FAN0529
3
FAN1002
153 l/s, 550m hr 153 l/s, 550m hr 3
FAN1009
3
89 l/s, 320m /hr
150mm
Axial
Extract
75 l/s, 270m /hr
FAN0531
150mm
Axial - Whisper
Supply
75 l/s, 270m3/hr
FAN0533
150mm Axial - Whisper
• High quality aluminium cowl construction, with fan incorporated, for longevity of operation. • Supported by a 2 year warranty.
With Flashing & HDPE Tube Duct Size
Fan Type
Air
Performance
Order Code
150mm
Ctr’fgl
Extract
153 l/s, 550m3hr
FAN0530
3
150mm
Ctr’fgl 3-spd
Extract
153 l/s, 550m hr
FAN0967
150mm
Axial - Whisper
Extract
89 l/s, 320m3/hr
FAN1060
3
150mm
Axial
Extract
75 l/s, 270m /hr
FAN0532
150mm
Axial
Supply
75 l/s, 270m3/hr
FAN0534
150mm 150mm
H/D Axial H/D Ctr’fgl
Extract Extract
3
75 l/s, 270m /hr 3
153 l/s, 550m hr
FAN0739 FAN0740
150mm Axial - Whisper
2
YEAR WARRANTY
H/D = Heavy Duty cowl used in these kits.
• • •
High quality aluminium cowl construction, with fan incorporated for longevity of operation. Includes Flashing for metal based roofs, an optional lead Flashing is available for concrete tile roofs (DCT0190) at an additional cost. Supported by a 2 year warranty.
Thru Roof Fan System Models Duct Size
Description
Fan Type
Performance*
Order Code
150mm
Ultra
Ctr’fgl
153 l/s, 550m3/hr
FAN0535
150mm • • •
Hyper
Hyper
3
75 l/s, 270m /hr
DCT0189
High quality aluminium cowl construction, with fan incorporated, for longevity of operation. Includes Flashing for metal based roofs, an optional lead Flashing is available for concrete tile roofs (DCT0190) at an additional cost. Supported by a 2 year warranty. 150mm Hyper Fan System
Connection 1. Electrical connection can be made inside or outside the roof space. * NOTE: All fan flow rates quoted are motor performance in free air.
2
YEAR WARRANTY
56
TECHNICAL DATA
Dimension information (mm) Dimensions - Thru Roof Fans
Models
A
B
C
FAN0529 - FAN1002
275
170
-
FAN1009
275
170
-
FAN0531- FAN0533
275
170
-
FAN0530 - FAN0967
275
170
500
FAN1060
275
170
500
FAN0532 - FAN0534
275
170
500
FAN0739 - FAN0740
275
170
500
A B
C
TECHNICAL SPECIFICATION Models
FAN0529 FAN0530 FAN0740
FAN1002 FAN0967
FAN0531 FAN0532 FAN0739
FAN0533 FAN0534
FAN1009 FAN1060
Supply Voltage
220-240VAC
220-240VAC
220-240VAC
220-240VAC
220-240VAC
Fan
Centrifugal
Axial
Axial
Axial - Whisper
Centrifugal 3
3
Fan Performance
153 l/s, 550m /hr
153 l/s, 550m /hr
75 l/s, 270m /hr
75 l/s, 270m /hr
89 l/s, 320m3/hr
Fan Wattage
58W
58W
44W
44W
46W
Maximum Pressure
320 Pa
320 Pa
80 Pa
130 Pa
130 Pa
Fan Speed
2500 RPM
2500 RPM
2850 RPM
2850 RPM
2750 RPM
Sound Level @ 1m
62 dB(A)
62 dB(A)
55 dB(A)
55 dB(A)
38 dB(A)
Operating Temp
-25 - +50°C
-25 - +50°C
-20 - +80°C
-20 - +80°C
-20 - +80°C
IP Rating
IPX4
IPX4
IPX2
IPX2
IPX2
Performance - FAN0529/FAN0530/FAN0740
3
3
Performance - FAN0531/FAN0532/FAN0739
90
350
80
300
70 60 Pressure (Pa)
Pressure (Pa)
250 200 150
50 40 30
100
20 50
10
0 0
50
100
150
0
200
0
20
40
Airflow (L/s)
FAN0530 / FAN0555- FAN0533/FAN0534 Performance
80
100
120
Performance - FAN1009/FAN1060
FAN0532 / FAN0553
90
160
80
140
70
120
Pressure (Pa)
60 Pressure (Pa)
60 Airflow (L/s)
50 40 30
100 80 60 40
20
20
10 0 0
20
40
60
80
100
120
0 0
Airflow (L/s)
FAN0532 / FAN0553
50
100
150
Airflow (L/s)
FAN1009 / FAN1060
Thomas and Betts | www.manrose.com.au |
[email protected]
57
Manrose PRO-SERIES HAND DRYERS PUBLIC AREAS/HEAVY USAGE APPLICATIONS
NEW
Designed to provide a cost effective alternative to conventional Hand Dryers. Providing a rapid drying time of 10 seconds, almost half that of the competitors products, thus reducing washroom time.
Switching Performance Method
Model No.
Cover
MAN/E-88AE
Stainless White Steel
Auto
56 l/s, 200m3/hr
FAN2287
MAN/E-88AEBC
Stainless Satin Steel
Auto
56 l/s, 200m3/hr
FAN2286
• • • •
Colour
Order Code
Heavy Usage Hand Dryers
70% energy savings. Tamper Proof Technology. Suitable for use in public areas for heavy usage. Supported by a 5 year warranty. Manrose Hand Dryer - MAN/E-88AE
Manrose CLASSIC HAND DRYERS PUBLIC AREAS/HEAVY USAGE APPLICATIONS
Model No.
Cover
Colour
Switching Performance Method
MAN/M-88A
ABS Thermoplastic
White
Auto
56 l/s, 200m3/hr
FAN2902
MAN/A-89
3mm Aluminium
White
Auto
108 l/s, 388m3/hr
FAN4396
MAN/A-89S
3mm Aluminium
Silver
Auto
108 l/s, 388m3/hr
FAN4395
MAN/A-89B
3mm Aluminium
Black
Auto
108 l/s, 388m3/hr
FAN4397
MAN/E-88A
Porcelain Enamel 2mm Steel
White
Auto
130 l/s, 470m3/hr
FAN2903
• •
Order Code
These models are suitable for use in public areas such as lavatories, factories, schools, railways and motorway service stations and are designed for heavy usage and unsupervised areas. Supported by a 2 year warranty.
Manrose Hand Dryer - MAN/E-88AEBC
Manrose MAN/M-88A
Manrose MAN/A-89
Colour Options available: White, Silver and Black
Manrose MAN/E-88A
2
YEAR WARRANTY
58
TECHNICAL DATA Dimension information
Dimension SPECIFICATION (mm) - Hand dryers Model
A
B
C
MAN/E-88AE
201
277
175
MAN/E-88AEBC
201
277
175
MAN/M-88A
225
275
160
MAN/A-89
225
275
160
MAN/E-88A
284
248
202
TECHNICAL SPECIFICATION - Pro-Series Dimensions - MAN/E-88AE Models, MAN/E-88AEBC
Models
MAN/E-88AE
MAN/E-88AEBC
Power
220 - 240V
220 - 240V
Cover
Stainless Steel
Stainless Steel
Colour
White
Stainless Satin Steel 3
Fan Performance
56 l/s, 200m /hr
56 l/s, 200m3/hr
Operation
No touch infra-red detection
No touch infra-red detection
Heater Element
450 - 900W adjustable
450 - 900W adjustable
Power
1.6kW @ 240V
1.6kW @ 240V
Dry Time
10 secs
10 secs
Sound Level
74 dB(A)
74 dB(A)
Weight
7.0kg
7.0kg
A
B
C
Dimensions - MAN/M-88A, A-89, A-89S A-89B
A
TECHNICAL SPECIFICATION - CLASSIC B
Models
MAN/M-88A
MAN/A-89
MAN/E-88A
Power
220 - 240V
220 - 240V
220 - 240V
C Depth
Cover Colour
ABS Thermoplastic 3mm Aluminium White
Fan Performance 56 l/s, 200m³/hr
Steel 2mm Porcelain Enamel
White, Silver, Black
White
108 l/s, 388m3/hr
130 l/s, 470m³/hr
Operation
No touch infra-red detection
No touch infra-red detection
No touch infra-red detection
Power
1.5kW @ 240V
2.0kW @ 240V
2.4kW @ 240V
Sound Level
54 dB(A)
69 dB(A)
70 dB(A)
Weight
3.3kg
4.7kg
7.5kg
Dimensions - MAN/E-88A
A
Thomas and Betts | www.manrose.com.au |
[email protected]
B
Depth
C
59
SPECIALISED FANS Frame Fan Model Duct Size
Model No.
Switching Method
Performance
120mm
Frame Fan
Standard
38 l/s, 138m³/hr FAN0397
150mm
Frame Fan
Standard
89 l/s, 320m³/hr FAN1043
• • •
Order Code
This frame fan is designed for use in computer rooms or applications where the introduction of cool air is required for small enclosed spaces. The ball bearing motor prolongs the life of the motor. Supported by a 2 year warranty.
Frame Fan 125mm
ACCESSORIES Duct Size
Description
Order Code
120mm
Finger Guard for FAN0397 - Metal
FAN0412
120mm
Filter Guard for FAN0397
FAN0413
150mm
Finger Guard for FAN1043
FAN0841
TECHNICAL DATA
2
Technical information
YEAR WARRANTY
Models
Frame Fan 125
Frame Fan 150
Power
220 - 240V
220 - 240V
Fan Performance
38 l/s, 138m³/hr
89 l/s, 320m³/hr
Fan Wattage
15W
38W
Models
A
B
C
Maximum Pressure
62Pa
135Pa
Frame Fan 125
120
120
105 40
Fan Speed
2650 RPM
2650 RPM
Frame Fan 150
172
150
160 51
Sound Level
43 dB(A)
46 dB(A)
Max. Operating Temp
80°C
70°C
IP Rating
IPX4
IPX2
Performance - 125mm Frame Fan
Dimension SPECIFICATION
Performance - 150mm Frame Fan
Dimensions - Frame Fan
D 36
72
108 144
180
216
252
288
D
324 360
A C
B
70
NOTE: All fan flow rates quoted are free air delivery.
60
90
Manrose CLASSIC DC SPECIALISED FANS 12/24V Extract-a-lite Models Duct Size
Model No.
Switching Colour Method
Performance
Order Code
100mm
BSL112W
Standard
18 l/s, 64m3/hr
FAN0625
White
3
100mm
BSL112G
Standard
Gold
18 l/s, 64m /hr
FAN0690
100mm
BSL112C
Standard
Chrome
18 l/s, 64m3/hr
FAN0691
3
100mm
BSL124W
Standard
White
18 l/s, 64m /hr
FAN0626
100mm
BSL124G
Standard
Gold
18 l/s, 64m3/hr
FAN0686
100mm • • • •
BSL124C
Standard
3
Chrome
18 l/s, 64m /hr
FAN0685
A compact extractor fan combined with an integral halogen light. Designed for installation in galleys, showers and toilets, ideal for marine and other leisure applications. Long life computer motor which will run continuously, only 2.8 watts. Supported by a 2 year warranty. Dimensions - DC Extract-a-lite
ACCESSORIES - Extract-a-lite Cowl
C
Duct Size
Description
Order Code
100mm
Extract-a-lite cowl
DCT1097
E B
A
• External cowl suitable for use in marine and non-marine applications
TECHNICAL DATA
F
D
Dimension information Models
A
B
C
D
E
F
BSL112
140
90
52
12
98
38
BSL124
140
90
52
10
98
38
A
TECHNICAL SPECIFICATION
Performance - DC Extract-a-lite
Models
BSL112
BSL124
Power
12 VDC
24 VDC
Fan Performance
18 l/s, 64m³/hr
18 l/s, 64m³/hr
Fan Wattage
45W
45W
Maximum Pressure
125 Pa
125 Pa
Fan Speed
1400 RPM
1400 RPM
Sound Level
45 dB(A)
45 dB(A)
Max. Operating Temp
40°C
40°C
IP Rating
IPX4
IPX4
2
YEAR WARRANTY
Switching options 1. Standard Model - operates from remote switch (not supplied). NOTE: All fan flow rates quoted are free air delivery.
61
FAN ACCESSORIES Fan timer Model No.
Description
Order Code
Time Air
7 Minute Fixed Timer (suits fans 20W-200W)
FAN0372
• A fixed fan timer that will automatically switch the appliance off after approximately 7 minutes. Description
Order Code
Fully Adjustable Run-On Fan Timer
FAN2444
Time Air - Fan Timer
• Timing Switch 1 Sec to 90 Mins. • Adjustable Run Timer & Start Delay.
Transformers
Fully adjustable Run-On Fan Timer
Model No.
Description
Order Code
ACTO TE0060
Electronic Transformer 12VAC 50kHz
FAN2101
• • • • •
This transformer must only be used with 12V lighting installations. Supports lamp wattages from 20W - 60W. Overload & short circuit protection with self resetting. Over temperature cut off. Dimmable with trailing and leading edge dimmers.
Model No.
Description
Order Code
TM 50-2-07
SELV Isolating Transformer 12VAC
FAN2402
• • • • • • • •
Electronic Transformer
SELV isolating transformer is required for all low voltage fan installations. Can be used with low voltage 12V lighting. Supports lamp wattages from 20W - 50W. An iron core transformer. Thermally stable and shatter-proof plastic casings. Overload & short circuit protection with self resetting. Over temperature cut off. Dimmable with trailing and leading edge dimmers.
Humidistat Controller Model No.
Description
Order Code
1360
Humidistat Controller
FAN0963
• • • 62
Designed to operate the fan when the relative humidity (RH) reaches a preset level. Fits a double pattress. This unit is adjustable between 20 - 90% RH.
Humidistat Controller
FAN ACCESSORIES ULTECON Thermostats Model No.
Description
Order Code
TA01
Analogue Thermostat
FAN0153
TD01
Digital Thermostat
FAN0981
TD02
Digital 2 Speed Thermostat
FAN0982
TD03
Digital 3 Speed Thermostat
FAN0983
• • • •
High quality, easy to use thermostats. Dual output switching for both cooling and heating situations. Electronic temperature sensor. Included in Heat Trans systems.
TD03 Digital 3 Speed Thermostat
Speed Controllers Model No.
Description
Switching Method
Order Code
1348
For XF/XP/WF 230/300 Fans*
2 Spd + Reverse
FAN0155
1349
For XF/XP/WF 230/300 Fans*
Adjust + Reverse
FAN0156
1350
For any XF/XP/WF 230/300 Fans
Adjustable
FAN0157
PDL625F
General Purpose up to 500W
On-Off + Adjust
FAN2104
• A range of speed controllers with variable or 2 speed and reversible options. • Models 1348-1350: Electrical load must be between 20 and 200 watts. • FAN0154 - Single pattress mounting block for FAN0155/0156/0157.
PDL625F General Purpose
*Not suitable for manual pull cord model fans.
ULTECON Speed Controller Model No.
Description
Input Output Current Power
Order Code
SPC05
Ultecon 5 Speed Fan Controller
1A
FAN1096
100W
• 5 speed fan selection - manual or external control. • Enclosure can be wall mounted or free standing. • On/Off switch.
Ulecon 5 Speed Fan Controller
Fan Mounting Brackets Duct Size
Description
Order Code
100-200mm
Fan Mounting Bracket for 100 - 200mm
FAN0015
250-315mm
Fan Mounting Bracket for 250 - 315mm
FAN0016
• These adjustable fan mounting brackets, designed for use with the centrifugal fans. • Supplied in pairs.
100-200mm Fan Mounting Bracket
Thomas and Betts | www.manrose.com.au |
[email protected]
63
