Preview only show first 10 pages with watermark. For full document please download

Manual 10925696

   EMBED


Share

Transcript

WELCOME Congratulations on the purchase of your new AM/FM Radio SY-1663. In order to fully benefit from this product please read the following instructions carefully. Store this user manual in a safe place for future references. LOCATION OF CONTROLS 1. 2. 3. 4. 5. TELESCOPIC ANTENNA RADIO TUNING KNOB CONTROL VOLUME CONTROL KNOB POWER OFF/ BAND SELECTOR HEADPHONE JACK 6. ANALOGUE DISPLAY 7. BATTERY COMPARTMENT COVER (back cabinet) OPERATING INSTRUCTIONS DC Battery Supply Open the battery compartment and insert as indicated in the compartment two batteries, type LR6, UM3 or AA cells. Radio 1. Select the wave band using RADIO BAND SELECTOR. 2. Adjust the sound with the controls VOLUME. 3. You may connect stereo headphones with a 3.5mm jack. Plug in the earphone jack to the socket PHONES. The speaker will automatically stop to work. 4. Tune to a radio station using the TUNING knob. To improve reception: - For FM, pull out the telescopic aerial antenna. To improve the FM Reception, incline and turn the aerial, reduce its length if the FM-signal is too strong (very close to a transmitter). - For AM, the unit is provided with a built-in aerial, so there is no need to use the telescopic aerial. Rotate the unit to find the best position. CLEANING Clean the cabinet with a soft cloth moistened with water or mild detergent. Do not use solvents such as alcohol, benzene or thinner, as they may damage the cabinet finish. Make sure to disconnect the mains lead from the supply before cleaning. TECHNICAL SPECIFICATION Speaker: 3 inches, 8 Ohms dynamic speaker Power output: 0.3W RMS. DC Battery: DC 3V (2 x “UM3 / AA”) Radio frequency AM 530 – 1600 kHz FM 88 – 108 MHz Due to continuous product development, design and specifications are subject to change without notice. PRECAUTIONS 1. For DC operation, simply insert two "UM-3 / AA" batteries for unit operation. 2. Do not leave the batteries in the compartment for a long time. Remove the batteries to avoid leakage and damage. 3. Do not expose the unit to extreme temperature nor high humidity to ensure normal functioning for a long lifetime. For instances, never place the unit in bathing areas nor around stoves and radiators. 4. If you find the unit is not working properly, please take it to your nearest services center. Do not attempt to repair by yourself. DECLARATION OF CONFORMITY Manufacturer Name: Satyatrade S. L. Address: Pol. Ind. La Raya. C/ Guadalquivir, 2. Camarma de Esteruelas, 28816 Madrid Tel: 902 430 967 Fax: 91 8864285 NIF: B83254763 Manufacturing country: China Description: AM/FM Radio Sytech® SY-1663 complies with the following directives: CE standard: EMC Directive 2004/108/EC ROHS standard: 2011/65/EU Restriction of Hazardous Substance Signed: Ajeet Nebhwani Utamchandani Sole Administrator